Search Results

Search found 12089 results on 484 pages for 'rule of three'.

Page 350/484 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

• Where should test classes be stored in the project?

  - by limc

  I build all my web projects at work using RAD/Eclipse, and I'm interested to know where do you guys normally store your test's *.class files. All my web projects have 2 source folders: "src" for source and "test" for testcases. The generated *.class files for both source folders are currently placed under WebContent/WEB-INF/classes folder. I want to separate the test *.class files from the src *.class files for 2 reasons:- There's no point to store them in WebContent/WEB-INF/classes and deploy them in production. Sonar and some other static code analysis tools don't produce an accurate static code analysis because it takes account of my crappy yet correct testcase code. So, right now, I have the following output folders:- "src" source folder compiles to WebContent/WEB-INF/classes folder. "test" source folder compiles to target/test-classes folder. Now, I'm getting this warning from RAD:- Broken single-root rule: A project may not contain more than one output folder. So, it seems like Eclipse-based IDEs prefer one project = one output folder, yet it provides an option for me to set up a custom output folder for my additional source folder from the "build path" dialog, and then it barks at me. I know I can just disable this warning myself, but I want to know how you guys handle this. Thanks.

  Read the article

• How to allow all except part 1 and part 2 ?

  - by Stackfan

  This allows me to get easyly dynamic input variables instead of putting a static prefix like /en/etcetcetc, but the problem is all controllers are blocked. Everything goes to index/index. Question: How can i tell this rule allow evertying as it is now, but do not track if it contains http://site.com/donotcatch/me and http://site.com/iamnotbelongstodynamic1/blabla protected function _initRoutes() { ... $dynamic1 = new Zend_Controller_Router_Route( '/:variable0/:variable1', array( 'controller' => 'index', 'action' => 'index'), array( 'variable0' => '^[a-zA-Z0-9_]*$', 'variable1' => '^[a-zA-Z0-9_]*$', ) ); Follow up: Normally, i always belive yes we can, so, we can do that like this where dynamic1 does not the inter-fare with my other static controllers: // http://site/yeswecan/blabla // variable0 = yeswecan // variable1 = blabla $dynamic1 = new Zend_Controller_Router_Route( '/:variable0/:variable1', array( 'controller' => 'index', 'action' => 'index'), array( 'variable0' => '^[a-zA-Z]*$', 'variable1' => '^[a-z0-9_]*$', ) ); // http://site/ajax/whatever... // solves it $dynamic2 = new Zend_Controller_Router_Route( '/ajax/:variable0', array( 'controller' => 'ajax', 'action' => '' ), array( 'variable0' => '^[a-zA-Z0-9_]*$', ) ); // http://site/order/whatever... // solves it $dynamic3 = new Zend_Controller_Router_Route( '/order/:variable0', array( 'controller' => 'order', 'action' => ''), array( 'variable0' => '^[a-zA-Z0-9_]*$', ) ); Note: Still the controllers are getting failed for example http://site/ajax/whatever always goes to /ajax/index where i wanted to send it as /ajax/user-inserted-value How can i fix the $dynamic2 and $dynamic3 by keeping $dynamic1 ??

  Read the article

• php script randomly hangs up

  - by sergdev

  I install php 5 (more precisely 5.3.1) as apache module. After this one of my application becomes randomly hang up on mysql_connect - sometimes works, sometimes no, sometimes reload of page helps. How can this be fixed? I use Windows Vista, Apache/2.2.14 (Win32) PHP/5.3.1 with php module, MySql 5.0.67-community-nt. After a minute I obtain the error message: Fatal error: Maximum execution time of 60 seconds exceeded in path\to\mysqlcon.php on line 9 I run MySql locally and heavy load could not be a reason: SHOW PROCESSLIST shows about 3 process SHOW VARIABLES LIKE 'MAX_CONNECTIONS' is 100. UPDATE: At first I thought that this is connected with mysql_connect. But now I can't say for certain. More difficult thing is when I insert the line to debug: $fh = fopen("E://_debugLog", 'a'); fwrite($fh, __FILE__ . " : " . __LINE__ . "\n"); fclose($fh); script start working near that location as a rule.

  Read the article

• JavaScript doesn't parse when mod-rewrited through a PHP file?

  - by Newbtophp

  If I do the following (this is the actual/direct path to the JavaScript file): <script href="http://localhost/tpl/blue/js/functions.js" type="text/javascript"></script> It works fine, and the JavaScript parses - as its meant too. However I'm wanting to shorten the path to the JavaScript file (aswell as do some caching) which is why I'm rewriting all JavaScript files via .htaccess to cache.php (which handles the caching). The .htaccess contains the following: <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^js/(.+?\.js)$ cache.php?file=$1 [NC] </IfModule> cache.php contains the following PHP code: <?php if (extension_loaded('zlib')) { ob_start('ob_gzhandler'); } $file = basename($_GET['file']); if (file_exists("tpl/blue/js/".$file)) { header("Content-Type: application/javascript"); header('Cache-Control: must-revalidate'); header('Expires: ' . gmdate('D, d M Y H:i:s', time() + 3600) . ' GMT'); echo file_get_contents("tpl/blue/js/".$file); } ?> and I'm calling the JavaScript file like so: <script href="http://localhost/js/functions.js" type="text/javascript"></script> But doing that the JavaScript doesn't parse? (if I call the functions which are within functions.js later on in the page they don't work) - so theirs a problem either with cache.php or the rewrite rule? (because the file by itself works fine). If I access the rewrited file- http://localhost/js/functions.js directly it prints the JavaScript code, as any JavaScript file would - so I'm confused as to what I'm doing wrong... All help is appreciated! :)

  Read the article

• Client validate in MVC 2

  - by khoailang

  Hello, I'm very new in MVC 2, Let say, I have a page with 1 text box and 2 input typed submit, "back" and "next". I'm using client validation like this: "" type="text/javascript"/" " type="text/javascript"/ " type="text/javascript"/ . . . <% Html.EnableClientValidation(); % . . . . . . and validation rule used for that text box is [StringLength(100, ErrorMessage="This field should be no longer than 100")] My wish is that validation rules will be applied only when I click on Next button. And when I click on Back button, no validation error message will be displayed and form will be posted to server. Is it possible to do that? could you please tell me how? My problem now is that when I click Back, validation rules are applied and prevent me from posting back to server.

  Read the article

• Returning two or more values from a function

  - by cf_PhillipSenn

  I need to return multiple values from a ColdFusion function in an ajax callback function. Here's what I've got: $('input[name="StateName"]').live('change', function() { var StateID = $(this).parents('tr').attr('id'); var StateName = $(this).val(); $.ajax({ url: 'Remote/State.cfc' ,type: "POST" ,data: { 'method': 'UpdateStateName' ,'StateID': StateID ,'StateName': StateName } ,success: function(result){ if (isNaN(result)) { $('#msg').text(result).addClass('err'); } else { $('#' + result + ' input[name="StateName"]').addClass('changed'); }; } ,error: function(msg){ $('#msg').text('Connection error').addClass('err'); } }); }); If I trap a database error, then the success callback is fired, and the result is Not a Number (It is in fact, the text of the error message). I need the function to also pass back other values. One might be the primary key of the row that caused the error. Another might be the old StateName, so that I can refresh the old value on the screen so that the client will know absolutely for sure that their change did not take effect. I guess I'm breaking the rule of atomicity here and need to fix that, because I'm using result as both the primary key of the row that was updated, or it's the error message if the update fails. I need to return both the primary key and the error message.

  Read the article

• Magento: How do I get observers to work in an external script?

  - by Laizer

  As far as I can tell, when a script is run outside of Magento, observers are not invoked when an event is fired. Why? How do I fix it? Below is the original issue that lead me to this question. The issue is that the observer that would apply the catalog rule is never called. The event fires, but the observer doesn't pick it up. I'm running an external script that loads up a Magento session. Within that script, I'm loading products and grabbing a bunch of properties. The one issue is that getFinalPrice() does not apply the catalog rules that apply to the product. I'm doing everything I know to set the session, even a bunch of stuff that I think is superfluous. Nothing seems to get these rules applied. Here's a test script: require_once "app/Mage.php"; umask(0); $app = Mage::app("default"); $app->getTranslator()->init('frontend'); //Probably not needed Mage::getSingleton('core/session', array('name'=>'frontend')); $session = Mage::getSingleton("customer/session"); $session->start(); //Probably not needed $session->loginById(122); $product = Mage::getModel('catalog/product')->load(1429); echo $product->getFinalPrice(); Any insight is appreciated.

  Read the article

• Can a PHP object respond to an undefined method?

  - by Nathan Long

  Rails relies on some of the neat aspects of Ruby. One of those is the ability to respond to an undefined method. Consider a relationship between Dog and Owner. Owner has_many :dogs and Dog belongs_to :owner. If you go into script/console, get a dog object with fido = Dog.find(1), and look at that object, you won't see a method or attribute called Owner. What you will see is an owner_id. And if you ask for fido.owner, the object will do something like this (at least, this is how it appears to me): I'm being asked for my .owner attribute. I don't have one of those! Before I throw a NoMethodError, do I have a rule about how to deal with this? Yes, I do: I should check and see if I have an owner_id. I do! OK, then I'll do a join and return that owner object. PHP's documentation is - ahem - a bit lacking sometimes, so I wonder if anyone here knows the answer to this: Can I define similar behavior for objects in PHP? If not, do you know of a workaround for flexible model joins like these?

  Read the article

• nservicebus deleting subscription record after inserting it?

  - by Justin Holbrook

  I have been playing with nservicebus for a few weeks now and since everything was going well on my local machine I decided to try to set up a test environment and work on deployment. I am using the generic host that comes with nservicebus and was using the nservicebus.Integration profile when running locally, but would like to use Nservicebus.Production in the test environment. I set up a sql server 2008 database, made changes to my app.config and everything seemed to work fine. But after a few attempts, I noticed messages were not being picked up by my subscriber. I checked the subscription table and it was empty. Upon examination of the logs I noticed the following: 2010-05-06 15:07:57,416 [1] DEBUG NHibernate.Persister.Entity.AbstractEntityPers ister [(null)] <(null) - Insert 0: INSERT INTO [Subscription] (SubscriberEndpo int, MessageType) VALUES (?, ?) 2010-05-06 15:07:57,416 [1] DEBUG NHibernate.Persister.Entity.AbstractEntityPers ister [(null)] <(null) - Update 0: 2010-05-06 15:07:57,416 [1] DEBUG NHibernate.Persister.Entity.AbstractEntityPers ister [(null)] <(null) - Delete 0: DELETE FROM [Subscription] WHERE Subscriber Endpoint = ? AND MessageType = ? Why would it insert then delete my subscription right afterwards? To try to rule out a nhibernate dialect issue I tried switching my subscription storage to an oracle 10g database. It behaved exactly the same, it worked the first 2 times, then I started seeing my subscriptions being deleted right after they were inserted. Any ideas what is causing this behavior?

  Read the article

• IIS 6.0 Rewrite rules for Wordpress (Forward slash not working and other things)

  - by DigitalBlade

  Hi, I am using Wordpress 3.0.4 on IIS 6.0 and Windows Server 2003, hosted by a company. I was having lots of issues using permalinks. I have fixed most, but now I have an issue with a forward-slash not being added to the address. This would be fine on most websites, but not on IIS for some reason. Specifically, if I go to "mysite.com/wp-admin" I can log-in and get to the dashboard, but as soon as I click anything there i am redirected to a broken link. For example: "mysite.com/post-new.php". If I add the slash at the end it's fine. So I tried to have a rewrite rule to automatically add the slash to such address: RewriteRule /wp-admin /wp-admin/ [L] But it still doesn't work. For your reference, here's the complete file: [ISAPI_Rewrite] RewriteBase / RewriteCond ${REQUEST_FILENAME} !-f RewriteCond ${REQUEST_FILENAME} !-d # For special WordPress folders (e.g. theme, admin, etc.) RewriteRule /wp-admin /wp-admin/ [L] RewriteRule /wp-(.*) /wp-$1 [L] RewriteRule /(.*\.(?:jpg|jpeg|gif|css|txt|xml|html|png|js)) /$1 [I,L] # Rules to ensure that normal content gets through RewriteRule /images/(.*) /images/$1 [L] RewriteRule /favicon.ico /favicon.ico [L] RewriteRule /robots.txt /robots.txt [L] RewriteRule /phpmyadmin/(.*) /phpmyadmin/$1 [L] RewriteRule /phpmyadmin /phpmyadmin/ [L] # For all WordPress pages RewriteRule ^/$ /index.php [L] RewriteRule /(.*) /index.php/$1 [L] Any ideas? Thanks in advance

  Read the article

• Should .net comments start with a capital letter and end with a period?

  - by Hamish Grubijan

  Depending on the feedback I get, I might raise this "standard" with my colleagues. This might become a custom StyleCop rule. is there one written already? So, Stylecop already dictates this for summary, param, and return documentation tags. Do you think it makes sense to demand the same from comments? On related note: if a comment is already long, then should it be written as a proper sentence? For example (perhaps I tried too hard to illustrate a bad comment): //if exception quit vs. // If an exception occurred, then quit. If figured - most of the time, if one bothers to write a comment, then it might as well be informative. Consider these two samples: //if exception quit if (exc != null) { Application.Exit(-1); } and // If an exception occurred, then quit. if (exc != null) { Application.Exit(-1); } Arguably, one does not need a comment at all, but since one is provided, I would think that the second one is better. Please back up your opinion. Do you have a good reference for the art of commenting, particularly if it relates to .Net? Thanks.

  Read the article

• Why are argument substitutions not replaced during rescanning?

  - by James McNellis

  Consider the following macro definitions and invocation: #define x x[0] #define y(arg) arg y(x) This invocation expands to x[0] (tested on Visual C++ 2010, g++ 4.1, mcpp 2.7.2, and Wave). Why? Specifically, why does it not expand to x[0][0]? During macro replacement, A parameter in the replacement list...is replaced by the corresponding argument after all macros contained therein have been expanded. Before being substituted, each argument’s preprocessing tokens are completely macro replaced (C++03 §16.3.1/1). Evaluating the macro invocation, we take the following steps: The function-like macro y is invoked with x as the argument for its arg parameter The x in the argument is macro-replaced to become x[0] The arg in the replacement list is replaced by the macro-replaced value of the argument, x[0] The replacement list after substitution of all the parameters is x[0]. After all parameters in the replacement list have been substituted, the resulting preprocessing token sequence is rescanned...for more macro names to replace (C++03 §16.3.4/1). If the name of the macro being replaced is found during this scan of the replacement list...it is not replaced. Further, if any nested replacements encounter the name of the macro being replaced, it is not replaced (C++03 §16.3.4/2). The replacement list x[0] is rescanned (note that the name of the macro being replaced is y): x is identified as an object-like macro invocation x is replaced by x[0] Replacement stops at this point because of the rule in §16.3.4/2 preventing recursion. The replacement list after rescanning is x[0][0]. I have clearly misinterpreted something since all of the preprocessors I've tested say I am wrong. In addition, this example is a piece of a larger example in the C++0x FCD (at §16.3.5/5) and it too says that the expected replacement is x[0]. Why is x not replaced during rescanning? C99 and C++0x effectively have the same wording as C++03 in the quoted sections.

  Read the article

• Hibernate Session flush behaviour [ and Spring @Transactional ]

  - by EugeneP

  I use Spring and Hibernate in a web-app, SessionFactory is injected into a DAO bean, and then this DAO is used in a Servlet through webservicecontext. DAO methods are transactional, inside one of the methods I use ... getCurrentSession().save(myObject); One servlet calls this method with an object passed. The update seems to not be flushed at once, it takes about 5 seconds to see the changes in the database. The servlet's method in which that DAO's update method is called, takes a fraction of second to complete. After the @Transactional method of DAO is completed, flushing may NOT happen ? It does not seem to be a rule [ I already see it ]. Then the question is this: what to do to force the session to flush after every DAO method? It may not be a good thing to do, but talking about a Service layer, some methods must end with immediate flush, and Hibernate Session behavior is not predictable. So what to do to guarantee that my @Transactional method persists all the changes after the last line of that method code? getCurrentSession().flush() is the only solution? p.s. I read somewhere that @Transactional IS ASSOCIATED with a DB Transaction. Method returns, transaction must be committed. I do not see this happens.

  Read the article

• How to get jQuery to find the first list-item, rather than all list-items?

  - by ricebowl

  I'm trying to implement a basic jQuery infinite carousel. As much for the learning process as for anything else (as a rule I'm not a fan of re-inventing wheels, but...I have to learn somehow, might as well start with the basics). I've managed to get the list to animate left happily enough, but I'm stuck when it comes to selecting the first element of the list. I've tried to use: $('ul#services > li:first'); $('ul#services > li:first-child'); $('ul#services > li').eq([0]); (xhtml below), In each case a console.log(first) (the var name used) returns all of the list-items. Am I doing something blatantly, and obviously, wrong? The eventual plan is to clone the first li, append it to the parent ul, remove the li from the list and allow the list to scroll infinitely. It's just a list of services rather than links so I'm not -at the moment- planning to have scroll or left/right functionality. Current xhtml: <div class="wrapper"> <ul id="services"> <!-- closing the `</li>` tags on the following line is to remove whitespace in the horizontal list, doesn't seem to make a difference to the jQuery from my own testing. --> <li>one</li ><li>two</li ><li>three</li ><li>four</li ><li>five</li ><li>six</li ><li>seven</li ><li>eight</li ><li>nine</li ><li>ten</li> </ul> </div>

  Read the article

• Sorting by some field and fetching whole tree from DB

  - by Niaxon

  Hello everyone, I am trying to do file browser in a tree form and have a problem to sort it somehow. I use PHP and MySQL for that. I've created mixed (nested set + adjacency) table 'element' with the following fields: element_id, left_key, right_key, level, parent_id, element_name, element_type (enum: 'folder','file'), element_size. Let's not discuss right now that it is better to move information about element (name, type, size) into other table. Function to scan specified directory and fill table work correctly. Noteworthy, i am adding elements to tree in specific order: folders first and only files. After that i can easily fetch and display whole table on the page using simple query: SELECT * FROM element WHERE 1=1 ORDER BY left_key With the result of that query and another function i can generate correct html code (<ul><li>... and so on). Now back to the question (finally, huh?). I am struggling to add sorting functionality. For example i want to order my result by size. Here i need to keep in my mind whole hierarchy of tree and rule: folders first, files later. I believe i can do that by generating in PHP recursive query: SELECT * FROM element WHERE parent_id = {$parentId} ORDER BY element_type (so folders would be first), size (or name for example) After that for each result which is folder i will send another query to get it's content. Also it's possible to fetch whole tree by left_key and after that sort it in PHP as array but i guess that would be worse :) I wonder if there is better and more efficient way to do such thing?

  Read the article

• capture text, including tags from string, and then reorder tags with text

  - by Brian

  I have the following text: abcdef<CONVERSION>abcabcabcabc<2007-01-12><name1><2007-01-12>abcabcabcabc<name2><2007-01-11>abcabcabcabc<name3><2007-02-12>abcabcabcabc<name4>abcabcabcabc<2007-03-12><name5><date>abcabcabcabc<name6> I need to use regular expressions in order to clean the above text: The basic extraction rule is: <2007-01-12>abcabcabcabc<name2> I have no problem extracting this pattern. My issue is that within th text I have malformed sequences: If the text doesn't start with a date, and end with a name my extraction fails. For example, the text above may have several mal formed sequences, such as: abcabcabcabc<2007-01-12><name1> Should be: <2007-01-12>abcabcabcabc<name1> Is it possible to have a regular expression that would clean the above, prior to extracting my consistent pattern. In short, i need to find all mal formed patterns, and then take the date tag and put it in front of it, as provided in the example above. Thanks.

  Read the article

• make target is never determined up to date

  - by Michael

  Cygwin make always processing $(chrome_jar_file) target, after first successful build. So I never get up to date message and always see commands for $(chrome_jar_file) are executing. However it happens only on Windows 7. On Windows XP once it built and intact, no more builds. I narrowed down the issue to one prerequisite - $(jar_target_dir). Here is part of the code # The location where the JAR file will be created. jar_target_dir := $(build_dir)/chrome # The main chrome JAR file. chrome_jar_file := $(jar_target_dir)/$(extension_name).jar # The root of the JAR sources. jar_source_root := chrome # The sources for the JAR file. jar_sources := bla #... some files, doesn't matter jar_sources_no_dir := $(subst $(jar_source_root)/,,$(jar_sources)) $(chrome_jar_file): $(jar_sources) $(jar_target_dir) @echo "Creating chrome JAR file." @cd $(jar_source_root); $(ZIP) ../$(chrome_jar_file) $(jar_sources_no_dir) @echo "Creating chrome JAR file. Done!" $(jar_target_dir): $(build_dir) echo "Creating jar target dir..." if [ ! -x $(jar_target_dir) ]; \ then \ mkdir $(jar_target_dir); \ fi $(build_dir): @if [ ! -x $(build_dir) ]; \ then \ mkdir $(build_dir); \ fi so if I just remove $(jar_target_dir) from $(chrome_jar_file) rule, it works fine.

  Read the article

• how to create a https proxy?

  - by davidshen84

  hi, i want to implement a simple ssl web proxy. i do not want to work with the network connection problems. so i think i can utilize a web server (like apache) to help me establish the connection, and my program works like a cgi app on the web server to redirect the web browser request. below is how i want to implement it: client make http/https requests to the target web site, and setting to use my http/https proxy; apache get the request, and use a rewrite rule to redirect the to my cgi app; my app parse the request and make request to the real web site; my app get the response from the real web site, then send the response back to the client; currently, http requests seem to work. but https requests do not work at all. i tried to use curl to make a request to a https web site through my proxy, and the result is CONNECTION FAILED. my question is, will my idea work? if yes, how to make the https requests work.

  Read the article

• Is safe ( documented behaviour? ) to delete the domain of an iterator in execution

  - by PoorLuzer

  I wanted to know if is safe ( documented behaviour? ) to delete the domain space of an iterator in execution in Python. Consider the code: import os import sys sampleSpace = [ x*x for x in range( 7 ) ] print sampleSpace for dx in sampleSpace: print str( dx ) if dx == 1: del sampleSpace[ 1 ] del sampleSpace[ 3 ] elif dx == 25: del sampleSpace[ -1 ] print sampleSpace 'sampleSpace' is what I call 'the domain space of an iterator' ( if there is a more appropriate word/phrase, lemme know ). What I am doing is deleting values from it while the iterator 'dx' is running through it. Here is what I expect from the code : Iteration versus element being pointed to (*): 0: [*0, 1, 4, 9, 16, 25, 36] 1: [0, *1, 4, 9, 16, 25, 36] ( delete 2nd and 5th element after this iteration ) 2: [0, 4, *9, 25, 36] 3: [0, 4, 9, *25, 36] ( delete -1th element after this iteration ) 4: [0, 4, 9, 25*] ( as the iterator points to nothing/end of list, the loop terminates ) .. and here is what I get: [0, 1, 4, 9, 16, 25, 36] 0 1 9 25 [0, 4, 9, 25] As you can see - what I expect is what I get - which is contrary to the behaviour I have had from other languages in such a scenario. Hence - I wanted to ask you if there is some rule like "the iterator becomes invalid if you mutate its space during iteration" in Python? Is it safe ( documented behaviour? ) in Python to do stuff like this?

  Read the article

• Name lookup for names not dependent on template parameter in VC++2008 Express. Is it a bug?

  - by Maciej H

  While experimenting a bit with C++ templates I managed to produce this simple code, for which the output is different, than I expected according to my understanding of C++ rules. void bar(double d) { std::cout << "bar(double) function called" << std::endl; } template <typename T> void foo(T t) { bar(3); } void bar(int i) { std::cout << "bar(int) function called" << std::endl; } int main() { foo(3); return 0; } When I compile this code is VC++2008 Express function bar(int) gets called. That would be the behaviour I would expect if bar(3);in the template body was dependent on the template parameter. But it's not. The rule I found here says "The C++ standard prescribes that all names that are not dependent on template parameters are bound to their present definitions when parsing a template function or class". Am I wrong, that "present definition" of bar when parsing the template function foo is the definition of void bar(double d);? Why it's not the case if I am wrong. There are no forward declarations of bar in this compilation unit.

  Read the article

• Seeking good practice advice: multisite in Drupal

  - by deanloh

  I'm using multisite to host my client sites. During development stage, I use subdomain to host the staging site, e.g. client1.mydomain.com. And here's how it look under the SITES folder: /sites/client1.mydomain.com When the site is completed and ready to go live, I created another folder for the actual domain, e.g. client1.com. Hence: /sites/client1.com Next, I created symlinks under client1.com for FILES and SETTINGS.PHP that points to the subdomain i.e. /sites/client1.com/settings.php --> /sites/client1.mydomain.com/settings.php /sites/client1.com/files --> /sites/client1.mydomain.com/files Finally, to prevent Google from indexing both the subdomain and actual domain, I created the rule in .htaccess to rewrite client1.mydomain.com to client1.com, therefore, should anyone try to access the subdomain, he will be redirected to the actual domain. This above arrangement works perfectly fine. But I somehow feel there is a better way to achieve the above in much simplified manner. Please feel free to share your views and all advice is much appreciated.

  Read the article

• How to further improve error messages in Scala parser-combinator based parsers?

  - by rse

  I've coded a parser based on Scala parser combinators: class SxmlParser extends RegexParsers with ImplicitConversions with PackratParsers { [...] lazy val document: PackratParser[AstNodeDocument] = ((procinst | element | comment | cdata | whitespace | text)*) ^^ { AstNodeDocument(_) } [...] } object SxmlParser { def parse(text: String): AstNodeDocument = { var ast = AstNodeDocument() val parser = new SxmlParser() val result = parser.parseAll(parser.document, new CharArrayReader(text.toArray)) result match { case parser.Success(x, _) => ast = x case parser.NoSuccess(err, next) => { tool.die("failed to parse SXML input " + "(line " + next.pos.line + ", column " + next.pos.column + "):\n" + err + "\n" + next.pos.longString) } } ast } } Usually the resulting parsing error messages are rather nice. But sometimes it becomes just sxml: ERROR: failed to parse SXML input (line 32, column 1): `"' expected but `' found ^ This happens if a quote characters is not closed and the parser reaches the EOT. What I would like to see here is (1) what production the parser was in when it expected the '"' (I've multiple ones) and (2) where in the input this production started parsing (which is an indicator where the opening quote is in the input). Does anybody know how I can improve the error messages and include more information about the actual internal parsing state when the error happens (perhaps something like a production rule stacktrace or whatever can be given reasonably here to better identify the error location). BTW, the above "line 32, column 1" is actually the EOT position and hence of no use here, of course.

  Read the article

• printing out dictionnaires

  - by kyril

  I have a rather specific question: I want to print out characters at a specific place using the \033[ syntax. This is what the code below should do: (the dict cells has the same keys as coords but with either '*' or '-' as value.) coords = {'x'+str(x)+'y'+str(y) : (x,y) for x,y, in itertools.product(range(60), range(20))} for key, value in coords.items(): char = cells[key] x,y = value HORIZ=str(x) VERT=str(y) char = str(char) print('\033['+VERT+';'+HORIZ+'f'+char) However, I noticed that if I put this into a infinite while loop, it does not always prints the same characters at the same position. There are only slight changes, but it deletes some and puts them back in after some loops. I already tried it with lists, and there it seems to behave just fine, so I tend to think it has something todo with the dict, but I can not figure out what it could be. You can see the Problem in a console here: SharedConsole.I am happy for every tip on this matter. On a related topic: After the printing, some changes should be made at the values of the cells dict, but for reason unknown to me, the only the first two rules are executed and the rest is ignored. The rules should test how many neighbours (which is in population) are around the cell and apply the according rule. In my implemention of this I have some kind of weird tumor growth (which should not happen, as if there more than three around they should the cell should die) (see FreakingTumor): if cells_copy [coord] == '-': if population == 3: cells [coord] = '*' if cells_copy [coord] == '*': if population > 3: cells [coord] = '-' elif population <= 1: cells [coord] = '-' elif population == 2 or 3: cells [coord] = '*' I checked the population variable several times, so I am quite sure that is not the matter. I am sorry for the slow consoles. Thanks in advance! Kyril

  Read the article

• Aliasing `T*` with `char*` is allowed. Is it also allowed the other way around?

  - by StackedCrooked

  Note: This question has been renamed and reduced to make it more focused and readable. Most of the comments refer to the old text. According to the standard objects of different type may not share the same memory location. So this would not be legal: int i = 0; short * s = reinterpret_cast<short*>(&i); // BAD! The standard however allows an exception to this rule: any object may be accessed through a pointer to char or unsigned char: int i = 0; char * c = reinterpret_cast<char*>(&i); // OK However, it is not clear to me if this is also allowed the other way around. For example: char * c = read_socket(...); unsigned * u = reinterpret_cast<unsigned*>(c); // huh? Summary of the answers The answer is NO for two reasons: You an only access an existing object as char*. There is no object in my sample code, only a byte buffer. The pointer address may not have the right alignment for the target object. In that case dereferencing it would result in undefined behavior. On the Intel and AMD platforms it will result performance overhead. On ARM it will trigger a CPU trap and your program will be terminated! This is a simplified explanation. For more detailed information see answers by @Luc Danton, @Cheers and hth. - Alf and @David Rodríguez.

  Read the article

• Which design pattern fits - strategy makes sense ?

  - by user554833

  --Bump *One desperate try to get someone's attention I have a simple database table that stores list of users who have subscribed to folders either by email OR to show up on the site (only on the web UI). In the storage table this is controlled by a number(1 - show on site 2- by email). When I am showing in UI I need to show a checkbox next to each of folders for which the user has subscribed (both email & on site). There is a separate table which stores a set of default subscriptions which would apply to each user if user has not expressed his subscription. This is basically a folder ID and a virtual group name. But, Email subscriptions do not count for applying these default groups. So if no "on site" subscription apply default group. Thats the rule. How about a strategy pattern here (Pseudo code) Interface ISubscription public ArrayList GetSubscriptionData(Pass query object) Public class SubscriptionWithDefaultGroup Implement ArrayList GetSubscriptionData(Pass query object) Public class SubscriptionWithoutDefaultGroup Implement ArrayList GetSubscriptionData(Pass query object) Public class SubscriptionOnlyDefaultGroup Implement ArrayList GetSubscriptionData(Pass query object) does this even make sense? I would be more than glad for receive any criticism / help / notes. I am learning. Cheers

  Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >