Search Results

Search found 19055 results on 763 pages for 'high performance'.

Page 354/763 | < Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >

  • Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

    - by rumtscho
    Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

    Read the article

  • Developer Notebook i5 or i7

    - by Cas Sakal
    I could not decide on which configuration below gives better performance for developers on a notebook(running VS.NET, SQL Server, no gaming); (A) i5 540M + SSD (Intel) or (B) i7 720M + 7200 RPM HDD (Western Digital) Since these two configurations(A, B) costs nearly same $ for me, I would like to buy the fastest one for my job environment. Please do not comment just buy this or that, if you can give an inference about your choice I would be appreciated. Thank you, cas

    Read the article

  • JBOSS App Server vs. Glassfish

    - by codingbear
    I'm quite newbie on Glassfish. What are some differences between JBoss and Glassfish? Why would you chooose one over the other. I'm trying to read up on Glassfish, but it is really hard to pinpoint things that I may need before I start installing and trying to deploy some applications on it. UPDATE It would be good if any additional information on JBoss and Glassfish comparison is provided (e.g. technologies they support, performance, etc.)

    Read the article

  • Linux Mplayer Instead of flash any distro/browser

    - by data_jepp
    The thing is that flash sucks for linux on 64-bit, performance vice. Due to this I actually download every clip to a temp folder and play the file while it's being downloaded with mplayer. This works really nice. Flash is not to play a video. Does there exist a plugin for this for any browser? I tried google, but I can't find the right words to search for.

    Read the article

  • Hyper-V Network Boot Legacy Network

    - by Carl
    Hi, I am planning out a Hyper-V R2 Cluster environment. I was wondering if I went to the effort of deploying one of the few methods to network boot from iSCSI inside the guests, whether the legacy network adapter would switch to a synthetic after boot, or whether the connection could be handed to a synthetic network after boot? This is obviously for performance reasons. MS suggests that some emulated devices are capable of switching to synthetic with integration services after boot, but doesn't specifically list all which are capable.

    Read the article

  • checking the status of CPU throttling: whether ON or OFF

    - by Gaurish Telang
    I am trying to install the ATLAS BLAS library which recommends that I turn if CPU throttling to do the install. How do I check if my CPU throttling is ON or OFF? I tried the suggestion of Code: ./cpufreq-selector -g performance in the /usr/bin directory as suggested elsewhere in the forum but there was no output and the control returned back to the user. I have searched everywhere but there does not seem to be a way to determine the status of the CPU throttling

    Read the article

  • Editting HD Quicktime .mov files in Windows

    - by NoCarrier
    I recently purchased one of those new wave of point & shoot digicams (canon SD780) that shoot high definition 720p video. Unfortunately it only writes to Quicktime files. How can I go about editing these in Windows without spending any money? I found a few MOV to AVI or WMV converters but am experiencing some quality degradation in the output.

    Read the article

  • Default uTorrent upload limits?

    - by jasondavis
    I am using uTorrent for my torrents and when I open a new torrent with utorrent, I must manually right click the item click on bandwidth allocation set it to HIGH then I must repat the first 2 steps again and then go to click on Set upload limit and click the proper desired amount which for me is 1 Kb/s This is very annoying to do this on every single torrent, is there a way to have these set as the default values in utorrent?

    Read the article

  • How to increase contrast of Windows 7 Menu Item highlight

    - by Barry Kelly
    The Windows 7 menu item highlight effect is quite subtle - on my machine, menu items go from light grey to having a light blue shading. This makes it quite hard to tell at a glance which exact menu item is highlighted at any one time. You can see an example (from Firefox) here: Is there an easy way to increase the contrast of the menu item highlight effect, without having to go all-out to an over the top high-contrast color scheme?

    Read the article

  • Which cloud service is best?? can you order it??

    - by mathew
    Hi there are many cloud services out there but famous are mentioned below...can any one tell me which one is first,second,third etc....in terms of money,performance and reliability.. 1) Amazon 2) Rackspace 3) Softlayer 4) Vps.net I dont know other actually I am only looking for Linux services .... Mathew

    Read the article

  • Our embedded linux system won't recognize a USB Device if it is plugged in before powerup. Suggestions?

    - by Blaine
    We are developing on a small embedded device. This device us a gumstix overo board running OpenEmbedded linux. We have our development almost completely done, and have run into the strangest of bugs that we can't figure out. We have a USB Device (Spectrophotometer) that has a USB2.0 Connection and an external power supply for the light source. Typical behavior is that you plug in the power supply, then the USB connection to a host. When the usb connection is detected by the device, the device boots up and enables the light source and fan. The device is then able to be used by the host system. The problem is that if the device is plugged into the Gumstix before we turn on the Gumstix, the USB Device apparently is not probed by the system (and hence does not turn on). Under a normal situation, when the connection is initialized by plugging in the usb cable, the spectro turns itself on and becomes available to the system (this can be seen via "lsusb" typically). Neither of these things are happening. There is no device detected via "lsusb" and no dmesg errors of any kind that we can see. It is as if the device is not plugged in. The device does show up and work fine if we unplug the USB cable and plug it back in once the system is booted up. It turns on and shows up on the usb bus, and we can access it with our driver. On any other desktop or laptop, it does not matter if the host system is on or off when we plug in the spectrometer. This behavior is what I would consider to be "normal" - that the usb system is probed and initialized at boot time, and the usb devices come online. In other words, our system is fully functional as long as we plug in the usb device after the system is booted up. Unfortunately this isn't possible in our final product - everything comes on at once. Additional Info: 1) We have tried a flash drive attached to the system when the system is turned off. Booting up the system brings the flash drive online, as expected 2) There are no messages regarding the spectro or usb device (using dmesg). "lsusb" only lists the USB hubs / controllers. It is literally as if the device is not present and not plugged in. 3) We have tried a brand new image from gumstix and an older image from last year. Both images have this problem. This problem exists on all 3 gumstix devices we use. Does anyone have any suggestions? From what I can tell it isn't really possible to do a complete "reboot" of the usb system that is a complete emulation of "unplugging" and "replugging" a usb device. I feel like what is happening is that there is no initial probe on the usb bus that would trigger the usb handshaking, but this is somehow specific to the spectro. This seems to be a kernel issue or at least an issue in how the kernel is initializing the usb subsystem. I'm not really sure though. I have tried the gumstix mailing list, but there doesn't seem to be anyone who has seen this issue before. Any advice or suggestions on where to start looking would be fantastic. Thank you! Blaine output etc. $ uname -a Linux overo 2.6.33 #1 Tue Apr 27 08:35:38 PDT 2010 armv7l GNU/Linux When the system is up and running and spectro is plugged in (working as intended), this is lsusb: Bus 001 Device 116: ID 2457:1022 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2457 idProduct 0x1022 bcdDevice 0.02 iManufacturer 1 USB4000 1.01.11 iProduct 2 Ocean Optics USB4000 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) dmesg output: usb usb1: usb auto-resume hub 1-0:1.0: hub_resume usb usb2: usb auto-resume ehci-omap ehci-omap.0: resume root hub hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 hub 2-0:1.0: hub_resume hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci-omap ehci-omap.0: suspend root hub usb usb2: usb resume ehci-omap ehci-omap.0: resume root hub hub 2-0:1.0: hub_resume ehci-omap ehci-omap.0: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 2: status 0501 change 0001 hub 2-0:1.0: state 7 ports 3 chg 0004 evt 0000 hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: new high speed USB device using ehci-omap and address 2 ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: default language 0x0409 usb 2-2: udev 2, busnum 2, minor = 129 usb 2-2: New USB device found, idVendor=2457, idProduct=1022 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Ocean Optics USB4000 usb 2-2: Manufacturer: USB4000 1.01.11 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: uevent usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent drivers/usb/core/inode.c: creating file '002' dmesg has nothing to say, and lusb simply lists nothing else but the two default usb controllers / hubs if we plug the device in before the system is turned on.

    Read the article

  • Apache + Tomcat error 120006 Using mod_proxy_ajp for Load Balance

    - by Wakaru44
    I have an apache 2 frontend with two nodes, and a backend with two instances of tomcat 6 balance with mod_proxy_ajp. The bbdd is in a separate machine. All machines use RHEL, 6.2 on the frontend, 5.5 on the backend. The infraestructure is virtualized using VMware. # This is the apache config in one of the virtualHost. ProxyPreserveHost On ProxyPass / balancer://liferay/ <Proxy balancer://liferay> BalancerMember ajp://lrab:8009 route=liferaya BalancerMember ajp://lrbb:8009 route=liferayb status=+H ProxySet lbmethod=byrequests nofailover=on </Proxy> The conector in tomcat is now configured like this: <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" URIEncoding="UTF-8" enableLookups="false" allowTrace="true" /> Do you think it could be useful to set a maxThreads parameter, like in this post?? in that case, How can i determine a proper number of threads? From time to time, we get errors like this [Tue Sep 18 17:57:02 2012] [error] ajp_read_header: ajp_ilink_receive failed [Tue Sep 18 17:57:02 2012] [error] (120006)APR does not understand this error code: proxy: read response failed from 192.168.1.104:8009 (lrab) And apache switches to the pasive node (if its active) or fails with 503. Some things i have tried so far: I think that i have some performance issues with one of the applications, Here you can see a threadDump But i'm not quite sure about it. I also started to monitor the network connection. I have noticed that there are some pings lost when i have a "ping -f " so maybe it could be a network issue, but the success rate is 100% (so the lost packets are only a few among the flood, but maybe, i don't know, enough to break the link betwen apache and tomcat). I wrote a python script to check connectivity with timestamps on the pings, so i can know when the network fails. After sniffing the network , i can also see some RST packets, but i don't know if that is a normal behaviour (some applications do that to end a network communication). I have also noticed that the applications have problems communicating with the database, but im not even sure if this could be related or not. If you think so, i can post more info about it. I changed the connector on the tomcats to use the native one, but still the same. I need not even a solution to this, but maybe some guidance on how can i troubleshoot this better ¿Analyze threads, monitor mysql performance, sniff the traffic between apaches and tomcats? Ultimately, all i need is to balance the tomcat instances in Active/pasive mode, so if there is another way to do it, i could give it a try.

    Read the article

  • Is bigger capacity ram faster then smaller capacity ram for same clock and CL? [migrated]

    - by didibus
    I know that bigger capacity hard-drives with the same RPM are faster then smaller capacity hard-drives. I was wondering if the same is true for ram. Given two ram clocked at 1600mhz and with identical CLs: 9-9-9-24. Is a 2x8 going to perform better then a 2x4 ? Note that I am not asking if having more ram will improve the performance of my PC, I'm asking if the bigger capacity ram performs better. Thank You.

    Read the article

  • Recommendations for Windows Server 2008 Hyper-V VPS Host?

    - by user37042
    I'm looking for a well-respected, high-performing Windows Server 2008 Hyper-V VPS host. For my linux hosting, I use a shared WebFaction account, so I'm spoiled by their incredible service and support. RackSpaceCloud also sounds really good, especially for linux hosting, but it sounds like their Windows hosting is just getting off the ground. I've heard good things about SoftSysHosting, but I didn't know if there were any other VPS providers out there that people will give strong endorsements for (as I do for WebFaction every chance I get).

    Read the article

  • (Serving PHP) Does Apache2 will create new thread on every connection?

    - by apasajja
    Based on many online sources, in serving static files, Apache2 will create new thread on every different connection... results in resource hungry But how about serving PHP through Apache2 (mod_php, MPM worker, etc)? Does apache will also open new thread like serving static files? (AFAIK, in nginx php-fpm, we can set the max thread, but I dont know how many connection per thread) I'm planning to use Apache2 in serving PHP, and hope it will be same as nginx PHP-FPM or even better in resource usage and performance.

    Read the article

  • Cloud computing?

    - by Shawn H
    I'm an analyst and intermediate programmer working for a consulting company. Sometimes we are doing some intensive computing in Excel which can be frustrating because we have slow computers. My company does not have enough money to buy everyone new computers right now. Is there a cloud computing service that allows me to login to a high performance virtual computer from remote desktop? We are not that technical so preferrably the computer is running Windows and I can run Excel and other applications from this computer. Thanks

    Read the article

  • NTFS on the mac - worth paying for?

    - by Console
    I currently use ntfs-3g on my mac to be able to write to NTFS-formatted drives. I have seen two commercial alternatives that boast better performance and more advanced features - Tuxera (a commercial version of ntfs-3g it seems) and Paragon. Are these products really better? Any experiences, hard facts, benchmarks from real-world use?

    Read the article

  • Subtitle program for DVD on Mac

    - by nocturnal
    I like the looks of Belle Nuit Subtitler, even though the price is a bit high. Does anyone know any other program like it that can add subtitles to a video stream while watching the stream itself? I want this to translate DVD's, in case that matters. I'm willing to purchase it if the program can deliver what i need but would like to see alternatives to Belle Nuit.

    Read the article

< Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >