Search Results

Search found 13752 results on 551 pages for 'ip protocol'.

Page 360/551 | < Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >

• Oracle Coherence 3.5 : Create Internet-scale applications using Oracle's high-performance data grid

  - by frederic.michiara

  Oracle Coherence Coherence provides replicated and distributed (partitioned) data management and caching services on top of a reliable, highly scalable peer-to-peer clustering protocol. Coherence has no single points of failure; it automatically and transparently fails over and redistributes its clustered data management services when a server becomes inoperative or is disconnected from the network. When a new server is added, or when a failed server is restarted, it automatically joins the cluster and Coherence fails back services to it, transparently redistributing the cluster load. Coherence includes network-level fault tolerance features and transparent soft re-start capability to enable servers to self-heal. For the ones looking at an easy reading and first good approach to Oracle Coherence, I would recommend reading the following book : Overview of Oracle Coherence 3.5 Build scalable web sites and Enterprise applications using a market-leading data grid product Design and implement your domain objects to work most effectively with Coherence and apply Domain Driven Designs (DDD) to Coherence applications Leverage Coherence events and continuous queries to provide real-time updates to client applications Successfully integrate various persistence technologies, such as JDBC, Hibernate, or TopLink, with Coherence Filled with numerous examples that provide best practice guidance, and a number of classes you can readily reuse within your own applications This book is targeted to Architects and developers, and as in our team we're more about Solutions Architects than developers I found interest in this book as it help to understand better Oracle Coherence and its value. The only point I may not agree with the authors is that Oracle Coherence is not an alternative to Oracle RAC in providing High Availability, but combining both Oracle RAC and Oracle Coherence will help Architects and Customers to reach higher level of service and high-availability. This book is available on https://www.packtpub.com/oracle-coherence-3-5/book Need to find out about Table of contents : https://www.packtpub.com/toc/oracle-coherence-35-table-contents Discover a sample chapter : https://www.packtpub.com/sites/default/files/6125_Oracle%20Coherence_SampleChapter.pdf Read also articles from the Authors on http://www.packtpub.com/ : Working with Aggregators in Oracle Coherence 3.5 Working with Value Extractors and Simplifying Queries in Oracle Coherence 3.5 Querying the Data Grid in Coherence 3.5: Obtaining Query Results and Using Indexes Installing Coherence 3.5 and Accessing the Data Grid: Part 1 Installing Coherence 3.5 and Accessing the Data Grid: Part 2 For more information on Oracle Coherence : What Oracle Coherence Can Do for You... : http://www.oracle.com/technology/products/coherence/coherencedatagrid/coherence_solutions.html Oracle Coherence on OTN : http://www.oracle.com/technology/products/coherence/index.html Oracle Coherence Knowledge Base : http://coherence.oracle.com/display/COH/Oracle+Coherence+Knowledge+Base+Home

  Read the article

• Sesame update du jour: SL 4, OOB, Azure, and proxy support

  - by Fabrice Marguerie

  I've just published a new version of Sesame Data Browser. Here's what's new this time: Upgraded to Silverlight 4 Can run out-of-browser (OOB), with elevated permissions. This gives you an icon on your desktop and enables new scenarios. Note: The application is unsigned for the moment. Support for Windows Azure authentication Support for SQL Azure authentication If you are behind a proxy that requires authentication, just give Sesame a new try after clicking on "If you are behind a proxy that requires authentication, please click here" An icon and a button for closing connections are now displayed on connection tabsSome less visible improvements Here is the connection view with anonymous access: If you want to access Windows Azure tables as OData, all you have to do is use your table storage endpoint as the URL, and provide your access key: A Windows Azure table storage address looks like this: http://<your account>.table.core.windows.net/ If you want to browse your SQL Azure databases with Sesame, you have to enable OData support for them at https://www.sqlazurelabs.com/ConfigOData.aspx. I won't show how it works because it's already been done in several places over the Web. Here are pointers: OData.org: Got SQL Azure? Then you've got OData OakLeaf Systems: Enabling and Using the OData Protocol with SQL Azure Patrick Verbruggen: Creating an OData feed for your Azure databases Shawn Wildermuth: SQL Azure's OData Support Jack Greenfield: How to Use OData for SQL Azure with AppFabric Access Control You can choose to enable anonymous access or not. When you don't enable anonymous access, you have to provide an Issuer name and a Secret key, and optionally an Security Token Service (STS) endpoint: Excerpt from Jack Greenfield's blog: To enable OData access to the currently selected database, check the box labeled "Enable OData". When OData access is enabled, database user mapping information is displayed at the bottom of the form.Use the drop down list labeled "Anonymous Access User" to select an anonymous access user. If an anonymous access user is selected, then all queries against the database presented without credentials will execute by impersonating that user. You can access the database as the anonymous user by clicking on the link provided at the bottom of the page. If no anonymous access user is selected, then the OData Service will not allow anonymous access to the database.Click the link labeled "Add User" to add a user for authenticated access. In the pop up panel, select the user from the drop down list. Leave the issuer name empty for simple authentication, or provide the name of a trusted Security Token Service (STS) for federated authentication. For example, to federate with another ACS based STS, provide the base URI for the STS endpoint displayed by the Windows Azure AppFabric Portal for the STS.Click the "OK" button to complete the configuration process and dismiss the pop up panel. When one or more authenticated access users are added, the OData Service will impersonate them when appropriate credentials are presented. You can designate as many authenticated access users as you like. The OData Service will decide which one to impersonate for each query by inspecting the credentials presented with the query.Next time I'll give an overview of how Sesame Data Browser is built.In the meantime, happy data browsing!

  Read the article

• Help me solve my problem with NPR Media Player

  - by Calcipher

  First of, let me apologize for this getting a bit technical. Several weeks ago, I found that while using NPR's media player (e.g. click on 'Listen to the Show' - this is what I've been using as a test) the stream would suddenly halt after a minute or three. I could not get the stream to restart without reloading the page. Now, I assumed this was an issue with NPR's player and Linux (or just a bug in their stuff in general) so I began to dig, the following is what I have tried to date (please note, the tldr; option is to skip to the latest thing as I think I know what is causing the problem). Note: All testing has been done, for consistency purposes, on a clean install of Chromium with no pluggins running. My machine is Ubuntu 10.10x64. First thing I always try, I disabled all firewall stuff on the system (UFW, default deny all, allow ssh). No change, firewall back up for all additional tests unless otherwise noted. In any case, UFW is stateful, so connections it started on a non-specified on different ports will continue to work. I deleted my ~/.macromeda and ~/.adobe folders, restarted (just to be sure) and tried. Program still froze. I decided the problem might be with my install of flash, so I purged the version I had (and the home folders again). I installed the x64 version of flash from a PPA. This had no effect. I decided that the problem might be with the version of flash, so I purged the x64 version and installed the standard x32 version that comes with Ubuntu. No luck. Back to the x64 version for consistency, I decided to set up a 64-bit mini 'clone' of my system in VirtualBox. I was able to run the media player with no problem. I rsynced (in archive mode) my home directory from my real machine to the virtual machine (with bridged networking, so it was fully visible on the network). I also used a few tricks to install ALL of the same software (and repositories) from the real machine to the virtual machine. I was still able to listen to the player. I decided that the problem was with my install (after all, it had gone through two major version upgrades). As I have /home/ on a separate partition it was easy to reinstall and use the same trick from #6 to have my system up and running again within about an hour. I continue to have issues with the NPR Media Player. By this point the weekend had come. At work, I use a wired connection while at home I use a wireless connection. For some reason I forgot that I was having problems and used the NPR Media Player over the weekend. Low and behold it worked just fine at home on wireless (note: for various reasons, I could not test this on wired at home). Following from #6, I decided that the problem was either something with the network at work or still something with my account. As the latter was easier to test, I created a new account on my system and used that at work. The Media Player worked. At a loss, I decided to watch the traffic with tshark (the text based brother of wireshark) - X's to protect the innocent, I am the XXX.24.200.XXX: sudo tshark -i eth0 -p -t a -R "ip.addr == XXX.24.200.XXX && ip.addr == XXX.166.98.XXX" As you would expect, there were tons and tons of packets, but each and every time the player froze, this is what I got 08:42:20.679200 XXX.166.98.XXX - XXX.24.200.XXX TCP macromedia-fcs 56371 [PSH, ACK] Seq=817686 Ack=6 Win=65535 Len=1448 TSV=495713325 TSER=396467 08:42:20.718602 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396475 TSER=495713325 08:42:21.050183 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713362 TSER=396475 08:42:21.050221 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396508 TSER=495713362 08:42:21.680548 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713425 TSER=396508 08:42:21.680605 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396571 TSER=495713425 08:42:22.910354 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713548 TSER=396571 08:42:22.910400 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396694 TSER=495713548 08:42:25.340458 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495713791 TSER=396694 08:42:25.340517 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=396937 TSER=495713791 08:42:30.170698 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495714274 TSER=396937 08:42:30.170746 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=397420 TSER=495714274 08:42:39.801738 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495715237 TSER=397420 08:42:39.801784 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=398383 TSER=495715237 08:42:59.032648 XXX.166.98.XXX - XXX.24.200.XXX TCP [TCP ZeroWindowProbe] macromedia-fcs 56371 [ACK] Seq=819134 Ack=6 Win=65535 Len=1 TSV=495717160 TSER=398383 08:42:59.032696 XXX.24.200.XXX - XXX.166.98.XXX TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] 56371 macromedia-fcs [ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=400306 TSER=495717160 08:43:00.267721 XXX.24.200.XXX - XXX.166.98.XXX TCP 56371 macromedia-fcs [FIN, ACK] Seq=6 Ack=819134 Win=0 Len=0 TSV=400430 TSER=495717160 08:43:00.267827 XXX.24.200.XXX - XXX.166.98.XXX TCP 56371 macromedia-fcs [RST, ACK] Seq=7 Ack=819134 Win=65535 Len=0 TSV=400430 TSER=495717160 So, as you can see, my machine is sending out a ZeroWindow packet (which I think means some buffer or another filled up) which causes the Media Player to halt (unfortunately, terminally - no controls on it really do anything anymore). Any ideas, at all, what would cause this? Why only on eth0 under my main account?

  Read the article

• Development processes, the use of version control, and unit-testing

  - by ct01

  Preface I've worked at quite a few "flat" organizations in my time. Most of the version control policy/process has been "only commit after it's been tested". We were constantly committing at each place to "trunk" (cvs/svn). The same was true with unit-testing - it's always been a "we need to do this" mentality but it never really materializes in a substantive form b/c there is no institutional knowledge base to do it - no mentorship. Version Control The emphasis for version control management at one place was a very strict protocol for commit messages (format & content). The other places let employees just do "whatever". The branching, tagging, committing, rolling back, and merging aspect of things was always ill defined and almost never used. This sort of seems to leave the version control system in the position of being a fancy file-storage mechanism with a meta-data component that never really gets accessed/utilized. (The same was true for unit testing and committing code to the source tree) Unit tests It seems there's a prevailing "we must/should do this" mentality in most places I've worked. As a policy or standard operating procedure it never gets implemented because there seems to be a very ill-defined understanding about what that means, what is going to be tested, and how to do it. Summary It seems most places I've been to think version control and unit testing is "important" b/c the trendy trade journals say it is but, if there's very little mentorship to use these tools or any real business policies, then the full power of version control/unit testing is never really expressed. So grunts, like myself, never really have a complete understanding of the point beyond that "it's a good thing" and "we should do it". Question I was wondering if there are blogs, books, white-papers, or online journals about what one could call the business process or "standard operating procedures" or uses cases for version control and unit testing? I want to know more than the trade journals tell me and get serious about doing these things. PS: @Henrik Hansen had a great comment about the lack of definition for the question. I'm not interested in a specific unit-testing/versioning product or methodology (like, XP) - my interest is more about work-flow at the individual team/developer level than evangelism. This is more-or-less a by product of the management situation I've operated under more than a lack of reading software engineering books or magazines about development processes. A lot of what I've seen/read is more marketing oriented material than any specifically enumerated description of "well, this is how our shop operates".

  Read the article

• JSR 360 and JSR 361: A Big Leap for Java ME 8

  - by terrencebarr

  It might have gone unnoticed to some, but Java ME took a big leap forward a couple of weeks ago with the filing of two new JSRs: JSR 360: “Connected Limited Device Configuration 8″ (aka CLDC 8) JSR 361: “Java ME Embedded Profile” (aka ME EP) Together, these two JSRs will significantly update, enhance, and modernize the Java ME platform, and specifically small embedded Java, with a host of new features and functionality. JSR 360 – Connected Limited Device Configuration 8 CLDC 8 is based on JSR 139 (CLDC 1.1) and updates the core Java ME VM, language support, libraries, and features to be aligned with Java SE 8. This will include: VM updated to comply with the JVM language specification version 2 Support for SE 7/8 language features like Generics, Assertions, Annotations, Try-with-Resources, and more New libraries such as Collections, NIO subset, Logging API subset A consolidated and enhanced Generic Connection Framework for multi-protocol I/O With CLDC 8, Java ME and Java SE are entering their next phase of alignment – making Java the only technology today that truly scales application development, code re-use, and tooling across the whole range of IT platforms, from small embedded to large enterprise. JSR 361 – Java ME Embedded Profile ME EP is based on JSR 228 (IMP-NG) and updates the specification in key areas to provide a powerful and flexible application environment for small embedded Java platforms, building on the features of CLDC 8:  A new, lightweight component and services model Shared libraries Multi-application concurrency, inter-application communication, and event system Application management API optionality, to address low-footprint use cases With ME EP, application developers will have a modern application environment which allows development and deployment of  modular, robust, sophisticated, and footprint-optimized solutions for a wide range of embedded use cases and devices. Summary While these JSRs are still under development, it’s clear that there are exciting new times ahead for Java ME – turning into a serious application platform while maintaining the focus on resource-constrained devices to address the expected explosion of small, smart, and connected embedded platforms. To learn more, click on the above links for JSR 360 and JSR 361. Or review the JavaOne 2012 online presentations on the topic: CON11300: Expanding the reach of the Java ME Platform CON5943: Java ME 8 Service Platform And stay tuned for more in this space! Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "jsr 360", "jsr 361", "me 8", embedded, Embedded Java, JCP

  Read the article

• JSR 360 and JSR 361: A Big Leap for Java ME 8

  - by terrencebarr

  It might have gone unnoticed to some, but Java ME took a big leap forward a couple of weeks ago with the filing of two new JSRs: JSR 360: “Connected Limited Device Configuration 8″ (aka CLDC 8) JSR 361: “Java ME Embedded Profile” (aka ME EP) Together, these two JSRs will significantly update, enhance, and modernize the Java ME platform, and specifically small embedded Java, with a host of new features and functionality. JSR 360 – Connected Limited Device Configuration 8 CLDC 8 is based on JSR 139 (CLDC 1.1) and updates the core Java ME VM, language support, libraries, and features to be aligned with Java SE 8. This will include: VM updated to comply with the JVM language specification version 2 Support for SE 7/8 language features like Generics, Assertions, Annotations, Try-with-Resources, and more New libraries such as Collections, NIO subset, Logging API subset A consolidated and enhanced Generic Connection Framework for multi-protocol I/O With CLDC 8, Java ME and Java SE are entering their next phase of alignment – making Java the only technology today that truly scales application development, code re-use, and tooling across the whole range of IT platforms, from small embedded to large enterprise. JSR 361 – Java ME Embedded Profile ME EP is based on JSR 228 (IMP-NG) and updates the specification in key areas to provide a powerful and flexible application environment for small embedded Java platforms, building on the features of CLDC 8:  A new, lightweight component and services model Shared libraries Multi-application concurrency, inter-application communication, and event system Application management API optionality, to address low-footprint use cases With ME EP, application developers will have a modern application environment which allows development and deployment of  modular, robust, sophisticated, and footprint-optimized solutions for a wide range of embedded use cases and devices. Summary While these JSRs are still under development, it’s clear that there are exciting new times ahead for Java ME – turning into a serious application platform while maintaining the focus on resource-constrained devices to address the expected explosion of small, smart, and connected embedded platforms. To learn more, click on the above links for JSR 360 and JSR 361. Or review the JavaOne 2012 online presentations on the topic: CON11300: Expanding the reach of the Java ME Platform CON5943: Java ME 8 Service Platform And stay tuned for more in this space! Cheers, – Terrence Filed under: Mobile & Embedded Tagged: "jsr 360", "jsr 361", "me 8", embedded, Embedded Java, JCP

  Read the article

• Recap: Oracle at the Gartner Business Intelligence Summit

  - by kimberly.billings

  Getting to Vegas was no fun. As anyone who lives in the Bay Area knows, the SF airport shuts down one runway when it rains, causing major havoc. So rain, rain, rain on Sunday meant delay, delay, delay at the airport. Needless to say, my 6:30 pm flight didn't land in Vegas until 3:00 am! But the travel pains were worth it. There was a lot to be learned at the Gartner BI Summit this year, and the uptick in attendance was reflected in strong booth traffic and engaging conversations in the Oracle booth. Oracle customer, Dawn Conant, Director, Business Intelligence at Beckman Coulter, generated a lot of interest in her presentation about migrating from Business Objects to Oracle Business Intelligence, Enterprise Edition with Oracle Database 11g. Dawn's story was a very relatable one, as many of the attendees had plans for similar projects. One of the most interesting Gartner-led sessions compared BI/DW megavendors, IBM, Oracle, SAP and Microsoft. According to Gartner analyst Rita Sallam, these megavendors control about two-thirds of the BI market. Sallem attributes this in part to the fact that organizations are expanding their definitions of BI to also include analytics and performance management. In doing so, they require greater integration of BI applications with a broader set of applications and middleware. In a related session, a panel of Gartner analysts compared the Magic Quadrants for BI Platforms; CPM; Data Quality; Data Integration Tools; and Data Warehouses. Oracle is a leader in all of the Magic Quadrants in which it participates and has the most complete stack including hardware and software, according to Donald Feinberg. Feinberg also commented that in situations with VLDW and solid mixed workloads, Oracle Exadata is making a big difference! var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-13185312-1"); pageTracker._trackPageview(); } catch(err) {}

  Read the article

• Help for choosing a cost effective game server for Flash client

  - by Sapots Thomas

  I am developing a flash-based game primarily for desktops, to be hosted on facebook platform (like cityville, sims social etc). The gameplay doesn't involve real-time communication between players unlike an mmorpg. Here each player plays in his own world without any knowledge of other online players. I've written almost 95% of the game logic in actionscript on the client side. I used Smartfox Server pro on the server side (mostly used for getting data from the DB) and the entire server code is an extension written in java. I'm using json as the protocol for communication. Although I love smartfox server, as an indie, its tough for me to afford the unlimited users license. Morever its limited just to one machine. So I'm looking for an alternative to smartfox server now. The reason for choosing smartfox server earlier was to use the server properties supported by it. Server properties on smartfox server take advantage of the socket connection and are essentially server side objects in java which store some data for the player which he can change frequently during the game. And when he logs out of the game, the extension can write out the final state in the DB (I'm using MySQL). This significantly reduces the number of DB UPDATE/INSERT calls made during the game. I love the way this works since the data is secure as its on the server side and smartfox server is known to be scalable. (although I'm not sure whether this approach is used widely by gaming industry or not, since this is not an mmorpg, I'm putting all player in the lobby). So my question is whether any of the free and community supported servers like reddwarf, firebase, BlazeDS etc can provide a similar architecture so that I can use server properties without many code changes? EDIT : I am not insisting on the exact same feature (thats asking too much!), but atleast a viable messaging system on the server so that I can send actionscript objects from the client using json/binary so that its fast. OR maybe some completely different way to implement what I need here. Thanks in advance.

  Read the article

• Setup Guide for updating local system and the repository with the incremental Solaris 11.1 SRU

  - by Gurubalan

  This guide covers the steps to implement the following setup. I. Updating the local system from Solaris 11.1 to Solaris 11.1 SRU 16.5II. Setting up local system as an IPS Repository Server (HTTP interface)III. Updating the local repository with the incremental Solaris 11.1 SRU 16.5I. Updating the local system from Solaris 11.1 to Solaris 11.1 SRU 16.5We assume that the local system is currently installed with Solaris 11.1 GA and the system doesn't have internet connectivity.What I have:1. Two parts of full repo iso files downloaded from http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html. Both files are concatenated to a single file using the following command. $ cat sol-11_1-repo-full.iso-a sol-11_1-repo-full.iso-b > sol-11_1-repo-full.iso I suggest to verify the downloaded file against its md5checksum value [http://download.oracle.com/otn/solaris/11_1/md5sum.txt] using the following command digest -a md5 <file-name>  // the output of this command should match the original checksum value for that file.2. Incremental repo sol-11_1_16_5_0-incr-repo.iso downloaded from MOS [Patch 18269379: ORACLE SOLARIS 11.1.16.5.0 REPO ISO IMAGE (SPARC/X86 (64-BIT)]. You can get the checksum value of incremental repo iso by clicking the check box "show digest details" when you download the file.3. The local system IP is 192.168.10.10 & port 81 is reserved for repo serverPlease note that this repo file (either full or incremental) is common for both SPARC and X86(64BIT).Steps to update the local system: 1. #mounting s11.1 full repo iso to mnt        $ mount -F hsfs /soft/sol-11_1-repo-full.iso /mnt 2. Setting the pkg publisher to full repo source         $ pkg set-publisher -g file:///mnt/repo solaris 3. Perform the update of the packages.        $ pkg updateII. Setting up local system (Oracle Solaris 11.1) as an IPS Repository Server(HTTP interface):Please note that we have already mounted the full repo iso at /mnt    1. # copying /mnt permanently to the disk location at /s11.1        #zfs create -o atime=off -o mountpoint=/s11.1 rpool/s11.1        #rsync -aP /mnt/* /s11.1     2. #unmounting mnt         #umount /mnt3. To allow clients to access the local repository via HTTP, enable the application/pkg/server Service Management Facility (SMF) service.        svccfg -s application/pkg/server setprop pkg/inst_root=<data_source>/repo        eg: $svccfg -s application/pkg/server setprop pkg/inst_root=/s11.1/repo4. Setting port# to 81      svccfg -s application/pkg/server setprop pkg/port=<port_number>      eg: svccfg -s application/pkg/server setprop pkg/port="81"5a. Enable the pkg/server service (if the service is disabled)     $svcs pkg/server     STATE          STIME    FMRI     disabled        19:55:03 svc:/application/pkg/server:default      $svcadm enable pkg/server5b. Refresh/Restart the service, if it is already online       $svcadm refresh application/pkg/server       $svcadm restart application/pkg/server6. Setting pkg publisher on repo server and repo clients:      pkg set-publisher -G '*' -g http://<ip>:<port> solaris      eg: $pkg set-publisher -G '*' -g 'http://192.168.10.10:81' solaris7. Verify the Solaris 11.1 version from the repository         $pkgrepo list -s http://192.168.10.10:81 | grep entire         solaris   entire     0.5.11,5.11-0.175.1.0.0.24.2:20120919T190135Z You will have multiple row entries if the repository is setup with incremental SRUs.III. Updating the local repository with the incremental Solaris 11.1 SRU 16.51. #mounting s11.1 incremental SRU repo iso to mnt        $ mount -F hsfs <full_path_to>/sol-11_1_sruN_bldnum_respinnum-incr-repo.iso  /mnt        $ mount -F hsfs /soft/sol-11_1_16_5_0-incr-repo.iso /mnt2. Updating the local repository        $pkgrecv -s  /mnt/repo -d /s11.1/repo '*'3. Building a Search Index    $pkgrepo -s /s11.1/repo refresh     Initiating repository refresh.4. Refresh/Restart the service       $svcadm refresh svc:/application/pkg/server       $svcadm restart svc:/application/pkg/server5. Verify the repo has the incremental SRU as well.       # pkgrepo list -s http://192.168.10.10:81 | grep entire        solaris   entire      0.5.11,5.11-0.175.1.16.0.5.0:20140218T165248Z       solaris   entire      0.5.11,5.11-0.175.1.0.0.24.2:20120919T190135Z

  Read the article

• How to get my IR remote to work? Lirc can't see it

  - by user1234567

  I'm using Ubuntu 11.10 (amd64) and I'm trying to get my infrared remote control working. The IR device is a part of a DVB-T USB stick (Based on a RTL2832u chip). I'm using these drivers - it's the only way of getting this device to work under 11.10 that I found. It's a big impromevent from previous Ubuntu version, where I had to edit the driver's code. The device works quite great - and the IR part of it works, too. The driver's page says that the code it's in alpha stage, but I'm pretty sure that my issue has nothing to do with that. If, and only if driver's module is loaded with parameter rtl2832u_rc_mode=2 (which means "use NEC protocol for IR") the remote kind of works, I can see this by running cat /dev/.. ../input6 - when I press a button, random letters appear. The remote works just like a keyboard, but keys are totally messed up - when I press '5' the volume goes down, etc. I would like to use Lirc to fix that, but Lirc can't detect my device (i.e. irw shows nothing). I suspect, it's because something gets into control of the device and sets it up as a keyboard. Lirc seems to be working, it's KDE settings module works too, but it just doesn't detect the device. The Lirc page describes this issue, but since 2009 - the last year when that page was updated, Ubuntu moved from HAL (described there) to DeviceKit, rendering provided instruction useless. I had a similar issue with my previous remote, but the keys were not messed up so much - the remote was usable, so I gave up trying to get Lirc working. I tried the answer provided here, but it changed nothing. I also tried forcing lircd to use my device, but this didn't work too: for i in /sys/class/input/input* ; do echo -n "$(basename "$i"): "; cat "$i/name"; done shows input0: Power Button input1: Power Button input2: Logitech Logitech USB Keyboard input3: A4Tech PS/2+USB Mouse input6: IR-receiver inside an USB DVB receiver But when I run: lircd -n --device=name='IR*' as root (also tried with the full name) I always see: lircd-0.9.0[3983]: lircd(default) ready, using /var/run/lirc/lircd lircd-0.9.0[3983]: accepted new client on /var/run/lirc/lircd lircd-0.9.0[3983]: could not get file information for name=IR* lircd-0.9.0[3983]: default_init(): No such file or directory lircd-0.9.0[3983]: Failed to initialize hardware So, how to set up Lirc with devinput driver in such case?

  Read the article

• Mixed Solaris 10 and 11 versions in logical domains on the same server

  - by jsavit

  One question that comes up frequently is whether you can mix Solaris 10 and Solaris 11 in different logical domains under Oracle VM Server for SPARC. The answer is yes depending only on the system software requirements for the underlying hardware platform. Different versions of Solaris 10 and 11 can exist side-by-side on the same server and can act as control, service, I/O or guest domains subject only to the minimum software levels documented in the System Requirements section of the Oracle VM Server for SPARC Release Notes. Here's an example just taken from a running system. First, here's the control domain, which is running Solaris 10. I've highlighted a guest running Solaris 11. # uname -a SunOS atl-sewr-24 5.10 Generic_147440-01 sun4v sparc SUNW,SPARC-Enterprise-T5220 # ldm -V Logical Domains Manager (v 2.1) Hypervisor control protocol v 1.7 Using Hypervisor MD v 1.3 System PROM: Hypervisor v. 1.10.0 @(#)Hypervisor 1.10.0 2011/04/27 16:19\015 # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 1.6% 120d 17h atl-sewr-pool-148 active -n---- 5001 8 2G 0.1% 119d 21h atl-sewr-pool-152 active -n---- 5000 8 4G 0.2% 112d 19h atl-sewr-pool-154 active -n---- 5002 8 2G 0.1% 120d 15h atl-sewr-pool-155 active -n---- 5003 16 2G 0.0% 26d 14h 30m This system is running Oracle VM Server 2.1 with a Solaris 10 control domain. Hmm, I should update this machine to 2.2 when I get a few free moments. Upgrading is very straightforward. Here's a display logging into the highlighted guest: Last login: Mon May 21 10:18:16 2012 from dhcp-adc-twvpn- Oracle Corporation SunOS 5.11 11.0 November 2011 sewr@atl-sewr-pool-152:~$ uname -a SunOS atl-sewr-pool-152 5.11 11.0 sun4v sparc SUNW,SPARC-Enterprise-T5220 sewr@atl-sewr-pool-152:~$ cat /etc/release Oracle Solaris 11 11/11 SPARC Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. Assembled 18 October 2011 sewr@atl-sewr-pool-152:~$ sudo virtinfo -ct Password: Domain role: LDoms guest Control domain: atl-sewr-24 sewr@atl-sewr-pool-152:~$ That's running the GA version of Solaris 11, so I probably should update that some time too. Note the use of the virtinfo -ct command that lets the guest get information about the hosting environment. Summary You can mix and match versions of Solaris in logical domains. All the different combinations work: Solaris 10 and/or Solaris 11 control and service domains with Solaris 10 and/or Solaris 11 guests. Mixing different guest OS levels on the same server is one of the traditional reasons for using virtual machines in the first place since virtual machines were invented some 40 years ago, used to run production and test systems in parallel while upgrading OS levels. This can easily be done with Oracle VM Server for SPARC (Logical Domains).

  Read the article

• Networking Guidelines

  - by ACShorten

  One of the things I have noticed in my years in IT is the changes in networking. In the past networking was pretty simple with the host name and name resolution (via DNS) being pretty simple. Some sites still use this simple networking setup. These days, more complex name resolution, proxies, firewalls, demarcation nd virtualization, can make networking more complex. This can cause issues when installing products with in built networking that can frustrate even seasoned veterans. I have put together a few basic guidelines to hopefully help along with product installation and getting a product to operate in a somewhat complex network setup. All the components of the product (including the infrastructure) need to communicate via a network (even it is within a local machine/host). Ensure any host names referred to within configuration files are accessible via your networking setup. This may mean defining the hosts to the machines, to the DNS for name resolution and even your firewall to allow machines to communicate within your network. Make sure the ports used for any of the infrastructure are accessible (even through your firewall) and are unique within the host. Host duplication can cause the product to fail on startup as the port is already in use. If there are still issues, consider using localhost as your host name. I have used this in so many situations that I tend to use it now as a default anytime I install anything myself. Most Oracle products suggest to use localhost when using dynamic host or dynamic IP addresses and this is no different for the Oracle Utilities Application Framework. If you do use localhost then installing a Loopback Adapter for the operating system is recommended to force networking to a minimum. Usually localhost resolves to 127.0.0.1. When using multiple network connections, especially in a virtualized environment, ensure the host and ports used are relevent for the network cards you have setup. One of the common issues is finding the product is using a vierualized network card only to find that it is not setup for correct networking. If you are using the batch component, do not forget to ensure that the multicast protocol is enabled on your host and that the multicast address and port number specified are valid and accessible from all machines in the batch cluster (if clustering used). The same advice applies if you are using unicast where each host/port combination should be accessible. Hopefully these basic networking recommendations will help minimize any networking issues you might encounter.

  Read the article

• How do I set up nvidia graphics adapter to put out 1080p, it seems to be using interlace mode>

  - by keepitsimpleengineer

  After upgrading to 12.04, my mythbuntu client/server seems to be running in 1080i, the clue comes from: [ 1176.117] (II) NVIDIA(0): Setting mode "1920x1080_60i" [ 1231.340] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_60@1920x1080+0+0" This is from Xorg.0.log. This whole thing started from video tearing when watching Mythtv recordings. It didn't happen in 10.10. Should I use "TVStandard" "HD1080p" in the screen section since this is a dedicated HTPC? It only connects to an HDTV (1080p) via hdmi. Here is the current xorg.conf file: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Keyboard0" "CoreKeyboard" # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" "no" # Option "ZAxisMapping" "4 5" #EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Keyboard0" # Driver "kbd" #EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "SAMSUNG" HorizSync 26.0 - 81.0 VertRefresh 24.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 240" Option "TripleBuffer" "1" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection After a little digging, the question changes slightly, to wit... Per Chapter 19 of nvidia README... "If the EDID for the display device reported a preferred mode timing, and that mode timing is considered a valid mode, then that mode is used as the "nvidia-auto-select" mode." The EDID for my HDMI connected LCD monitor says use first device as preferred. Prefer first detailed timing : Yes Also: (--) NVIDIA(0): EDID maximum pixel clock : 230.0 MHz The list: (from startx -- -verbose 6 ) (--) NVIDIA(0): Detailed Timings: (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 148.50 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (--) NVIDIA(0): H/V Polarity : +/+ This is the actual mode selected: (from xorg.0.log) (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 74.18 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124 (--) NVIDIA(0): H/V Polarity : +/+ (--) NVIDIA(0): Extra : Interlaced (--) NVIDIA(0): CEA Format : 5 So my HTPC is down-converting to 1080i and then the Monitor is up-converting to 1080p How can I fix this, please?

  Read the article

• When to use SOAP over REST

  So, how does REST based services differ from SOAP based services, and when should you use SOAP? Representational State Transfer (REST) implements the standard HTTP/HTTPS as an interface allowing clients to obtain access to resources based on requested URIs. An example of a URI may look like this http://mydomain.com/service/method?parameter=var1&parameter=var2. It is important to note that REST based services are stateless because http/https is natively stateless. One of the many benefits for implementing HTTP/HTTPS as an interface is can be found in caching. Caching can be done on a web service much like caching is done on requested web pages. Caching allows for reduced web server processing and increased response times because content is already processed and stored for immediate access. Typical actions performed by REST based services include generic CRUD (Create, Read, Update, and Delete) operations and operations that do not require state. Simple Object Access Protocol (SOAP) on the other hand uses a generic interface in order to transport messages. Unlike REST, SOAP can use HTTP/HTTPS, SMTP, JMS, or any other standard transport protocols. Furthermore, SOAP utilizes XML in the following ways: Define a message Defines how a message is to be processed Defines the encoding of a message Lays out procedure calls and responses As REST aligns more with a Resource View, SOAP aligns more with a Method View in that business logic is exposed as methods typically through SOAP web service because they can retain state. In addition, SOAP requests are not cached therefore every request will be processed by the server. As stated before Soap does retain state and this gives it a special advantage over REST for services that need to preform transactions where multiple calls to a service are need in order to complete a task. Additionally, SOAP is more ideal for enterprise level services that implement standard exchange formats in the form of contracts due to the fact that REST does not currently support this. A real world example of where SOAP is preferred over REST can be seen in the banking industry where money is transferred from one account to another. SOAP would allow a bank to perform a transaction on an account and if the transaction failed, SOAP would automatically retry the transaction ensuring that the request was completed. Unfortunately, with REST, failed service calls must be handled manually by the requesting application. References: Francia, S. (2010). SOAP vs. REST. Retrieved 11 20, 2011, from spf13: http://spf13.com/post/soap-vs-rest Rozlog, M. (2010). REST and SOAP: When Should I Use Each (or Both)? Retrieved 11 20, 2011, from Infoq.com: http://www.infoq.com/articles/rest-soap-when-to-use-each

  Read the article

• Bluetooth firmware problem in Ubuntu 13.04

  - by chanzerre

  I have a [Dell Inspiron][1] 15R 5520 laptop. Bluetooth is not working at all. rfkill list all gives 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no dmesg|grep -i bluetooth gives [ 13.644428] Bluetooth: Core ver 2.16 [ 13.644445] Bluetooth: HCI device and connection manager initialized [ 13.644453] Bluetooth: HCI socket layer initialized [ 13.644455] Bluetooth: L2CAP socket layer initialized [ 13.644461] Bluetooth: SCO socket layer initialized [ 15.861363] Bluetooth: hci0 command 0x1003 tx timeout [ 15.903443] Bluetooth: can't load firmware, may not work correctly [ 17.332535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.332538] Bluetooth: BNEP filters: protocol multicast [ 17.332544] Bluetooth: BNEP socket layer initialized [ 17.393768] Bluetooth: RFCOMM TTY layer initialized [ 17.393781] Bluetooth: RFCOMM socket layer initialized [ 17.393783] Bluetooth: RFCOMM ver 1.11 hciconfig gives hci0: Type: BR/EDR Bus: USB BD Address: E0:06:E6:D5:DB:46 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN ISCAN RX bytes:687 acl:0 sco:0 events:56 errors:0 TX bytes:2024 acl:0 sco:0 commands:52 errors:0 I have visited the site http://wireless.kernel.org/en/users/Drivers/b43 and according to it lspci -vnn -d 14e4: gives 08:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) Subsystem: Dell Wireless 1704 802.11n + BT 4.0 [1028:0016] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1500000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: wl So I got my PCI-ID as 14e4:4365 which it says is not supported. The alternative is wl. What should I do? My Wi-Fi is working normally without any problems, but Bluetooth is not working. sudo dpkg -i wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb gives following error (Reading database ... 208543 files and directories currently installed.) Unpacking wireless-bcm43142-dkms (from wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb) ... Setting up wireless-bcm43142-dkms (6.20.55.19-1) ... Loading new wireless-bcm43142-6.20.55.19 DKMS files... Building only for 3.8.0-23-generic Building initial module for 3.8.0-23-generic Traceback (most recent call last): File "/usr/share/apport/package-hooks/dkms_packages.py", line 22, in <module> import apport ImportError: No module named apport Error! Bad return status for module build on kernel: 3.8.0-23-generic (x86_64) Consult /var/lib/dkms/wireless-bcm43142/6.20.55.19/build/make.log for more information.

  Read the article

• Is Infiniband going to get squeezed by iWARP and external QPI?

  - by andy.grover

  The Inquirer certainly thinks so.However, I'm not so sure it makes sense to compare Infiniband to an as-yet-unannounced optical external QPI. QPI is currently a processor interconnect. CPUs, RAM, and devices connected by it are conceptually part of the same machine -- they run a single OS, for example. They are both "networks" or "fabrics" but they have very different design trade-offs.Another widely-used bus in the system is closer to Infiniband than QPI -- PCI Express. Isn't it more likely that PCIe could take on IB? There are companies already who have solutions that use external PCI Express for cluster interconnect, but these have not gained significant market share. Why would QPI, a technology whose sweet spot is even further from Infiniband's than PCIe, be able to challenge Infiniband? It's hard to speculate without much information, but right now it doesn't seem likely to me.The other prediction made in the article is that Intel's 10GbE iWARP card could squeeze IB on the low end, due to its greater compatibility and lower cost.It's definitely never a good idea to bet against Ethernet when it comes to mass-market, commodity networking. Ethernet will win. 10GbE will win. But, there are now two competing ways to implement the low-latency RDMA Verbs interface on top of Ethernet. iWARP is essentially RDMA over TCP/IP over Ethernet. The new alternative is IBoE (Infiniband over Ethernet, aka RoCEE, aka "Rocky"). This encapsulates the IB packet protocol directly in the Ethernet frame. It loses the layer 3 routability of iWARP, but better maintains software compatibility with existing apps that use IB, and is simpler to implement in both software and hardware. iWARP has a substantial head start, but I believe that IBoE silicon will eventually be cheaper, and more likely to be implemented in commodity Ethernet hardware.I think IBoE is going to take low-end market share from traditional IB, but I think this is a situation IB hardware vendors have no problem accepting. Commoditized IBoE NICs invite greater use of RDMA features, and when higher performance is needed, customers can upgrade to "real" IB, maintaining IB's justification for higher prices. (IB max interconnect speeds have historically been 2-4x higher than Ethernet, and I don't see that changing.)(ObDisclosure: My current employer now sells IB hardware. I previously also worked at Intel. My opinions are my own, duh.)

  Read the article

• Acer Allionone Z5810 Touchscreen Issues 12.04

  - by Johannes

  I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• How to generate xorg.conf? (X -configure segfaults)

  - by Nicolas Raoul

  My video card is working fine, I have no screen problem. I am trying to generate an xorg.conf so I did: [ Logout ] sudo service gdm stop [ Move away xorg.conf.back and xorg.conf.fglrx-0 that were in /etc/X11 ] sudo dpkg-reconfigure xserver-xorg sudo X -configure But this last command segfaults: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux nico 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7447ab16-3406-442d-81e5-bb6a2d795205 ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 16:06:11 2010 List of video drivers: i740 ark geode siliconmotion mach64 s3 r128 apm intel neomagic vesa trident chips s3virge fglrx sis savage rendition i128 tseng ztv mga openchrome radeon ati nv v4l vmware cirrus tdfx nouveau sisusb voodoo fbdev (EE) Can't load FireGL DRM library (libfglrxdrm.so). Backtrace: 0: X (xorg_backtrace+0x3b) [0x80e938b] 1: X (0x8048000+0x61c8d) [0x80a9c8d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x34d410] 3: X (xf86CallDriverProbe+0x182) [0x80b82d2] 4: X (DoConfigure+0x1c8) [0x816b898] 5: X (InitOutput+0x1da) [0x80b98aa] 6: X (0x8048000+0x1ebbb) [0x8066bbb] 7: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x467bd6] 8: X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Note the line Can't load FireGL DRM library (libfglrxdrm.so) Note: I do have file /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so It is strange that it segfaults whereas I can use Gnome with no problem but well... Might be related: I tried to install the driver from ATI's website recently, and from then glxgears crashes at start. How can I generate xorg.conf in those conditions? It might or might not involve solving the segfault problem.

  Read the article

• What is the difference between development and R&D?

  - by MainMa

  I was asked by a colleague to explain clearly the difference between ordinary development and research and development (R&D) and was unable to do it. After reading Wikipedia, I still don't have the precise answer. According to Wikipedia (slightly modified): There are two primary models: In one model, the primary function is to develop new products; in the other model, the primary function is to discover and create new knowledge about scientific and technological topics for the purpose of uncovering and enabling development of valuable new products, processes, and services. The first model is confusing. Does it mean that development (not R&D) consists exclusively in adding new features to a product, solving bugs and doing maintenance? What if something which was previously developed as a new feature becomes a separate product? The second model is less confusing, but still, how to qualify whether something is new knowledge or existent knowledge which is just rediscovered? Later, Wikipedia adds that ordinary development is different from R&D because of its: nearly immediate profit or immediate improvement. It's still not clear enough. How to qualify "nearly immediate profit"? What if a task has an immediate profit but requires heavy research? Or if it is basic but has uncertain profit, like the enforcement of a common style over the codebase? For example, does it belong to development or R&D to: Develop an engine which abstracts the access to the database, simplifying and shortening enormously the code of other applications (existent or ones which will be written in future) which should access to the database? Establish a new service-oriented architecture for the entire organization of company resources, in order to move from a bunch of separate and autonomous applications to a set of well-organized, interconnected web services, like what is used by Amazon? Design a new communication protocol to allow faster replication of data between two data centers of the company? Conceive a new type of software testing while working on a specific product, knowing that this type of testing will improve/simplify the testing process? Prove that Functional programming is more appropriate than OOP for a specific application, based on evidence, logic and previous experience? Enhance the existent application by adding gestures on tactile screens, after doing studies and testing that shows that those gestures improve the productivity of the users by a ratio of at least 1.4 for a precise set of tasks? Find a way to strongly enhance the Power usage effectiveness (PUE) of a data center? Create a Domain-Specific Language (DSL)? In short, how could I determine whether I'm doing R&D while working on something?

  Read the article

• Server-infrastructure recommendations

  - by Tim van Elsloo

  Here's the thing: I need a cheap, fast, reliable infrastructure that can dynamically scale (like Amazon S3: cloud-storage). I'm thinking of 3 different type of 'servers'. Application-server Should be able to run CentOS (or another light Linux-distr.) Should be able to run Apache Should be able to run PHP Should be able to run GD (so it does rely on it's cpu). Should be extremely reliable and fast. Database-server Should be able to run MySQL Should be able to... well, do nothing else :P. Should be extremely reliable and fast. Storage-server Should be able to run some kind of file-transfer-deamon (like FTP, CouchDB, etc.) Should be able to do nothing else. Should be extremely reliable and fast. So technically, by transferring all static data to 2 different servers/services, the application-server can totally focus on the webpages. My questions: What services do you recommend? Which is cheaper, faster and more reliable: using my own server, or using some cloud-storage/cloud-computing-service (like Amazon S3, CloudFiles, etc.)? How can I prevent bandwidth abuse (such as dos-attacks causing the bill to be extremely high)? What's the difference between "including CDN" and "excluding CDN"? It seems the price doesn't differ at CloudFiles? Do you have to pay "including CDN" + "excluding CDN" when you decide to enable the delivery-network? Or have you only got to pay "including CDN"? Should I use my own nameserver too or can I use my domain-hoster's nameservers? What are the minimum software specifications of a nameserver. Can I write some software myself? Does anyone have a good protocol-description? I hope you can answer my questions. Answers I shouldn't write my own nameserver-software. Instead, I should use something like bind. (http://osspro.com/2010/05/04/linux-create-your-own-domain-name-server-dns/).

  Read the article

• Application Integration Future &ndash; BizTalk Server &amp; Windows Azure (TechEd 2012)

  - by SURESH GIRIRAJAN

  I am really excited to see lot of new news around BizTalk in TechEd 2012. I was recently watching the session presented by Sriram and Rajesh on “Application Integration Futures: The Road Map and What's Next on Windows Azure”. It was great session and lot of interesting stuff about the feature updates for BizTalk and Azure integration. I have highlighted them below, definitely customers who haven’t started using Microsoft BizTalk ESB Toolkit should start using them which is going to be part of the core BizTalk product in future release, which is cool… BizTalk Server feature enhancements Manageability: ESB Tool Kit is going to be part of the core BizTalk product and Setup. Visualize BizTalk artifact dependencies in BizTalk administration console. HIS administration using configuration files. Performance: Improvements in ordered send port scenarios Improved performance in dynamic send ports and ESB, also to configure BizTalk host handler for dynamic send ports. Right now it runs under default host, which does not enable to scale. MLLP adapter enhancements and DB2 client transaction load balancing / client bulk insert. Platform Support: Visual Studio 2012, Windows 8 Server, SQL Server 2012, Office 15 and System Center 2012. B2B enhancements to support latest industry standards natively. Connectivity Improvements: Consume REST service directly in BizTalk SharePoint integration made easier. Improvements to SMTP adapter, to add macros for sending same email with different content to different parties. Connectivity to Azure Service Bus relay, queues and topics. DB2 client connectivity to SQL Server and SQL Server connectivity to Informix. CICS Http client connectivity to Windows. Azure: Use Azure as IaaS/PaaS for BizTalk environment. Use Azure to provision BizTalk environment for test environment / development. Later move to On-premises or build a Hybrid cloud approach. Eliminate HW procurement for BizTalk environment for testing / demos / development etc. Enable to create BizTalk farm easily and remove/add more servers as needed. EAI Service: EAI Bridge Protocol transformation Message Transformation Running custom code Message Enrichment Hybrid Connectivity LOB Applications On-premises Application On-premises Connectivity to Applications in the cloud Queues/ Topics Ftp Devices Web Services Bridge can be customized based on the service needs to provide different capabilities needed as part of the bridge. Look at the sample for EDI bridge for EDI service sample. Also with Tracking enabled through the portal. http://msdn.microsoft.com/en-us/library/windowsazure/hh674490 Adapters: Service Bus Messaging adapter - New adapter added. WebHttp adapter - For REST services. NetTcpRelay adapter - New adapter added. I will start posting more and once I start playing with this…

  Read the article

• Ubuntu 12.04 wireless (wifi) not working, can not upgrade to 12.10, touchpad gestures not working. What to do?

  - by Ritwik

  I installed ubuntu 12.04 LTS 3 days ago and since then wireless feature and touchpad gestures are not working. Tried everything on internet but still unsuccessful. I cant upgrade to ubuntu 12.10. These are the following comments I tried. Please help me. EDIT: just realized usb 3.0 is also not working. COMMAND lsb_release -r OUTPUT ----------------------------------------------------------------- Release: 12.04 ----------------------------------------------------------------- COMMAND lspci OUTPUT ------------------------------------------------------------------ 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) 00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5) 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 07:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) 0f:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) ------------------------------------------------------------------ COMMAND sudo apt-get install linux-backports-modules-wireless-lucid-generic OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-backports-modules-wireless-lucid-generic ------------------------------------------------------------------- COMMAND cat /etc/lsb-release; uname -a OUTPUT ------------------------------------------------------------------- DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.5 LTS" Linux ritwik-PC 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------------- COMMAND lspci -nnk | grep -iA2 net OUTPUT ------------------------------------------------------------------- 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07) Subsystem: Hewlett-Packard Company Device [103c:225d] Kernel driver in use: r8169 -- 0f:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:217f] ------------------------------------------------------------------- COMMAND lsusb OUTPUT ------------------------------------------------------------------- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 002 Device 002: ID 8087:8000 Intel Corp. ------------------------------------------------------------------- COMMAND iwconfig OUTPUT ------------------------------------------------------------------- lo no wireless extensions. eth0 no wireless extensions. ------------------------------------------------------------------- COMMAND rfkill list all OUTPUT ------------------------------------------------------------------- 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no ------------------------------------------------------------------- COMMAND lsmod OUTPUT ------------------------------------------------------------------- Module Size Used by snd_hda_codec_realtek 224215 1 bnep 18281 2 rfcomm 47604 0 bluetooth 180113 10 bnep,rfcomm parport_pc 32866 0 ppdev 17113 0 nls_iso8859_1 12713 1 nls_cp437 16991 1 vfat 17585 1 fat 61512 1 vfat snd_hda_intel 33719 3 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event nouveau 775039 0 joydev 17693 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq ttm 76949 1 nouveau uvcvideo 72627 0 snd 79041 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videodev 98259 1 uvcvideo drm_kms_helper 46978 1 nouveau psmouse 98051 0 drm 241971 3 nouveau,ttm,drm_kms_helper i2c_algo_bit 13423 1 nouveau soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm v4l2_compat_ioctl32 17128 1 videodev hp_wmi 18092 0 serio_raw 13211 0 sparse_keymap 13890 1 hp_wmi mxm_wmi 13021 1 nouveau video 19651 1 nouveau wmi 19256 2 hp_wmi,mxm_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62190 0 ------------------------------------------------------------------- COMMAND sudo su modprobe -v ath9k OUTPUT ------------------------------------------------------------------- insmod /lib/modules/3.2.0-67-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko insmod /lib/modules/3.2.0-67-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko ------------------------------------------------------------------- COMMAND do-release-upgrade OUTPUT ------------------------------------------------------------------- Err Upgrade tool signature 404 Not Found [IP: 91.189.88.149 80] Err Upgrade tool 404 Not Found [IP: 91.189.88.149 80] Fetched 0 B in 0s (0 B/s) WARNING:root:file 'quantal.tar.gz.gpg' missing Failed to fetch Fetching the upgrade failed. There may be a network problem. ------------------------------------------------------------------- COMMAND sudo modprobe ath9k dmesg | grep ath9k NO OUTPUT FOR THEM COMMAND dmesg | grep -e ath -e 80211 OUTPUT ------------------------------------------------------------------- [ 13.232372] type=1400 audit(1408867538.399:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=975 comm="apparmor_parser" [ 13.232615] type=1400 audit(1408867538.399:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=975 comm="apparmor_parser" [ 15.186599] ath3k: probe of 3-4:1.0 failed with error -110 [ 15.186635] usbcore: registered new interface driver ath3k [ 88.219329] cfg80211: Calling CRDA to update world regulatory domain [ 88.351665] cfg80211: World regulatory domain updated: [ 88.351667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 88.351670] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351671] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351674] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351675] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ------------------------------------------------------------------- COMMAND sudo apt-get install touchpad-indicator OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: gir1.2-gconf-2.0 python-pyudev Suggested packages: python-qt4 python-pyside.qtcore The following NEW packages will be installed: gir1.2-gconf-2.0 python-pyudev touchpad-indicator 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 84.1 kB of archives. After this operation, 1,136 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://ppa.launchpad.net/atareao/atareao/ubuntu/ precise/main touchpad-indicator all 0.9.3.12-1ubuntu1 [46.5 kB] Get:2 http://archive.ubuntu.com/ubuntu/ precise/main gir1.2-gconf-2.0 amd64 3.2.5-0ubuntu2 [7,098 B] Get:3 http://archive.ubuntu.com/ubuntu/ precise/main python-pyudev all 0.13-1 [30.5 kB] Fetched 84.1 kB in 2s (31.6 kB/s) Selecting previously unselected package gir1.2-gconf-2.0. (Reading database ... 169322 files and directories currently installed.) Unpacking gir1.2-gconf-2.0 (from .../gir1.2-gconf-2.0_3.2.5-0ubuntu2_amd64.deb) ... Selecting previously unselected package python-pyudev. Unpacking python-pyudev (from .../python-pyudev_0.13-1_all.deb) ... Selecting previously unselected package touchpad-indicator. Unpacking touchpad-indicator (from .../touchpad-indicator_0.9.3.12-1ubuntu1_all.deb) ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Processing triggers for software-center ... INFO:softwarecenter.db.update:no translation information in database needed Setting up gir1.2-gconf-2.0 (3.2.5-0ubuntu2) ... Setting up python-pyudev (0.13-1) ... Setting up touchpad-indicator (0.9.3.12-1ubuntu1) ... ------------------------------------------------------------------- Not able to find ( drivers/net/wireless/ath/ath9k/hw.c ) or ( drivers/net/wireless/ath/ath9k/hw.h )

  Read the article

• Ideas for time-keeping in a webbased RPG?

  - by ashy_32bit

  I'm assigned a task of doing the preliminary research stuff for a web-based MMO RPG. Now my buggiest problem here is "web based" vs "MMO RPG". I did some research about time keeping systems and I'm totally confused as how exactly something as real-time as an MMO-RPG can work on some pull-only (unidirectional) platform like HTTP. I know there is also a turn-based alternative to time keeping but can it work in an MMO setting ? EDIT: Take a battle for example, player A (human) wants to attack Player B (also human) in the open. How does it work when when player A issues the "attack" command on player B ? how do I inform player B that he is being attacked ? and then how exactly the battle goes on between the two in an HTTP based communication channel? To my knowledge this is impossible unless you resort to another technology (HTML is 1-way, that is you can just ask server and get response, server can't update you unless being asked to. this is very well-known and simply explained). So I though maybe I can somehow change the whole timekeeping model from real-time to a more non-real-time model (towards a turn based RPG for example) and somehow work around the whole problem of "interactivity". EDIT2: It is not that I don't wanna use any server side technologies. For sure it is not gonna work client-side-only even for the most trivial of the multi-player games, let alone an RPG. So sure there would be a (probably complex) server side component to it (the so called Game Engine I suppose). The problem is not the technology that implements the logic (game mechanics) bits but the communication technology and how it limits the game mechanics abilities (like how real-time or turn based it is gonna be). HTTP is a request-response protocol meaning you get served only if you ask for it (explicitly send a GET or POST request to the server). HTTP server can not inform you if anything of interest happens in the game world unless you refresh the page (as some suggested) or you use some bi-directional tech (totally different animals) like Flash, WebSock, HTML5 etc etc. So maybe the question is: Is it possible to implement a MMORPG using only HTML5/PHP and no periodic page refreshes? if so what would be rules to make it an MMO-RPG? Can't explain it any clearer. Sorry :D

  Read the article

• WIF, ADFS 2 and WCF&ndash;Part 1: Overview

  - by Your DisplayName here!

  A lot has been written already about passive federation and integration of WIF and ADFS 2 into web apps. The whole active/WS-Trust feature area is much less documented or covered in articles and blogs. Over the next few posts I will try to compile all relevant information about the above topics – but let’s start with an overview. ADFS 2 has a number of endpoints under the /services/trust base address that implement the WS-Trust protocol. They are grouped by the WS-Trust version they support (/13 and /2005), the client credential type (/windows*, /username*, /certificate*) and the security mode (*transport, *mixed and message). You can see the endpoints in the MMC console under the Service/Endpoints page. So in other words, you use one of these endpoints (which exactly depends on your configuration / system setup) to request tokens from ADFS 2. The bindings behind the endpoints are more or less standard WCF bindings, but with SecureConversation (establishSecurityContext) disabled. That means that whenever you need to programmatically talk to these endpoints – you can (easily) create client bindings that are compatible. Another option is to use the special bindings that come with WIF (in the Microsoft.IdentityModel.Protocols.WSTrust.Bindings namespace). They are already pre-configured to be compatible with the ADFS endpoints. The downside of these bindings is, that you can’t use them in configuration. That’s definitely a feature request of mine for the next version of WIF. The next important piece of information is the so called Federation Service Identifier. This is the value that you (at least by default) have to use as a realm/appliesTo whenever you are requesting a token for ADFS (e.g. in  IdP –> RSTS scenario). Or (even more) technically speaking, ADFS 2 checks for this value in the audience URI restriction in SAML tokens. You can get to this value by clicking the “Edit Federation Service Properties” in the MMC when the Service tree-node is selected. OK – I will come back to this basic information in the following posts. Basically I want to go through the following scenarios: ADFS in the IdP role ADFS in the R-STS role (with a chained claims provider) Using the WCF bindings for automatic token issuance Using WSTrustChannelFactory for manual token handling Stay tuned…

  Read the article

• Should a server "be lenient" in what it accepts and "discard faulty input silently"?

  - by romkyns

  I was under the impression that by now everyone agrees this maxim was a mistake. But I recently saw this answer which has a "be lenient" comment upvoted 137 times (as of today). In my opinion, the leniency in what browsers accept was the direct cause of the utter mess that HTML and some other web standards were a few years ago, and have only recently begun to properly crystallize out of that mess. The way I see it, being lenient in what you accept will lead to this. The second part of the maxim is "discard faulty input silently, without returning an error message unless this is required by the specification", and this feels borderline offensive. Any programmer who has banged their head on the wall when something fails silently will know what I mean. So, am I completely wrong about this? Should my program be lenient in what it accepts and swallow errors silently? Or am I mis-interpreting what this is supposed to mean? The original question said "program", and I take everyone's point about that. It can make sense for programs to be lenient. What I really meant, however, is APIs: interfaces exposed to other programs, rather than people. HTTP is an example. The protocol is an interface that only other programs use. People never directly provide the dates that go into headers like "If-Modified-Since". So, the question is: should the server implementing a standard be lenient and allow dates in several other formats, in addition to the one that's actually required by the standard? I believe the "be lenient" is supposed to apply to this situation, rather than human interfaces. If the server is lenient, it might seem like an overall improvement, but I think in practice it only leads to client implementations that end up relying on the leniency and thus failing to work with another server that's lenient in slightly different ways. So, should a server exposing some API be lenient or is that a very bad idea? Now onto lenient handling of user input. Consider YouTrack (a bug tracking software). It uses a language for text entry that is reminiscent of Markdown. Except that it's "lenient". For example, writing - foo - bar - baz is not a documented way of creating a bulleted list, and yet it worked. Consequently, it ended up being used a lot throughout our internal bugtracker. Next version comes out, and this lenient feature starts working slightly differently, breaking a bunch of lists that (mis)used this (non)feature. The documented way to create bulleted lists still works, of course. So, should my software be lenient in what user inputs it accepts?

  Read the article

< Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >