Search Results

Search found 16639 results on 666 pages for 'task engine'.

Page 360/666 | < Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >

• Where to start for writing a simple java IDE?

  - by AedonEtLIRA

  I would like to start working on my own custom IDE. The biggest reason I want to work on the IDE is to help me gain an even greater, more intimate understanding of java (and other languages I add into it.) I don't want to do anything super fancy or revolutionary, I'd be happy if I could create something as compact as the BlueJ IDE I used in high school and be content. I have a few question on the specifics of the task that I hope I can get cleared up before I start investing time in this: Is there anything I should be aware of when writing the parser? Does anyone have any pointers that I should be aware of; pitfalls, brick walls or other constraints?

  Read the article

• where does the discrepancy between \# in PS1 and n in !n come from?

  - by Cbhihe

  Something has been gnawing at me for a while now and I can't seem to find a relevant answer either in man pages or using your 'Don't be evil' search engine. My .bashrc has the following: shopt -s histappend HISTSIZE=100 HISTFILESIZE=0 # 200 previous value Putting HISTFILESIZE to 0 allows me to start with a clean history slate with each new term window. I find it practical in conjunction with using a prompt that contains \#, because when visualizing a previous command before recalling it with !n or !-p, one can just do: $ history | more to see its relevant "n" value In my case, usually the result of: $ \history | tail -1 | awk '{print $1}' # (I know this is an overkill, don't flame me) equals the expanded value of # in PS1 minus 1, which is how I like it to be at all times. But then, sometimes not. At times the expanded value of # sort of "runs away". It's incremented in such a a manner that it becomes than $(( $(\history | tail -1 | awk '{print $1}')+1 )) Any pointers, anyone?

  Read the article

• Problems running Ubuntu 12.10 in VMWare Player 5

  - by Tiim

  I'm trying to install Ubuntu 12.10 in VMWare Player 5. My pc is running Windows 7. The installation seems to go okay, but when I boot up ubuntu, although it starts up and I see the desktop, I can't see any task bar or basically anything other than the default wallpaper in the background. When I move my cursor across the screen towards the edges, the desktop flickers and extremely distorted and pixelated objects appear momentarily. I've tried uninstalling everything, downloading it all again and reinstalling, but I get the exact same problem. Does anyone recognise this issue? Is there a more stable pairing than Ubuntu 12.10 & WMWare Player 5.0.1, perhaps?

  Read the article

• Isometric tile range aquisition

  - by Steve

  I'm putting together an isometric engine and need to cull the tiles that aren't in the camera's current view. My tile coordinates go from left to right on the X and top to bottom on the Y with (0,0) being the top left corner. If I have access to say the top left, top right, bot left and bot right corner coordinates, is there a formula or something I could use to determine which tiles fall in range? I've linked a picture of the layout of the tiles for reference. If there isn't one, or there's a better way to determine which tiles are on screen and which to cull, I'm all ears and am grateful for any ideas. I've got a few other methods I may be able to try such as checking the position of the tile against a rectangle. I pretty much just need something quick. Thanks for giving this a read =)

  Read the article

• I am unable to use the "wubi" install I get the message "ERROR TaskList: Cannot download the metalink and therefore the ISO"

  - by pat

  used WUBI a few months ago on both XP and win7 systems with no problem. Unable to install on either for the last 2 weeks? p From the log 09-05 11:36 DEBUG CommonBackend: Could not find any ISO or CD, downloading one now 09-05 11:36 DEBUG TaskList: New task get_metalink 09-05 11:36 DEBUG TaskList: ### Running get_metalink... 09-05 11:36 DEBUG downloader: downloading http://cdimage.ubuntu.com/xubuntu/releases/12.04/release/xubuntu-12.04-desktop-amd64.metalink > C:\ubuntu\install 09-05 11:36 ERROR CommonBackend: Cannot download metalink file http://cdimage.ubuntu.com/xubuntu/releases/12.04/release/xubuntu-12.04-desktop-amd64.metalink err=[Errno 14] HTTP Error 404: Not Found

  Read the article

• Creating a user called 'root'

  - by pnp

  I am creating Virtual Machines using the ubuntu-vm-builder. The syntax goes something like this: ubuntu-vm-builder kvm precise \ --domain newvm \ --dest newvm \ --arch i386 \ --hostname hostnameformyvm \ --mem 256 \ --user john \ --pass doe \ --ip 192.168.0.12 \ --mask 255.255.255.0 \ --net 192.168.0.0 \ --bcast 192.168.0.255 \ --gw 192.168.0.1 \ --dns 192.168.0.1 \ --mirror http://archive.localubuntumirror.net/ubuntu \ --components main,universe \ --addpkg acpid \ --addpkg vim \ --addpkg openssh-server \ --addpkg avahi-daemon \ --libvirt qemu:///system ; I need to enable the 'root' user account after creating each of my VMs (and supply a password for it). I was just wondering whether I can take this short-cut of supplying the username (--user) as root in this command itself. If I supply username as root to create my VMs, am I creating/enabling the root user, or just creating a user named as root? p.s.: any better ways to achieve my task are also welcome. But I don't want to manually meddle with each VM after its creation

  Read the article

• How do I comperes and split files with terminal

  - by Levan

  So what I wanted to do. comperes(7zip) and split 600MB folder into 199MB parts but sadly when I tried to do this task with archive manager it gave me an error, but I know that if I use terminal it will work. I looked this up in askubuntu and found out about this commend 7z a -v5m -mx0 ubuntu.7z I understand that v5m will split it to 5 mb parts and -mx0 means that it will not comperes it but I want it to comperes so what should I write instead of this -mx0 pleas note: I am using .7zip because I most probably will use this file on windows pc thank you in advanced

  Read the article

• Can there be an Environment that Reacts to Weather changes in-game?

  - by The415

  Just to be straightforward, I am completely new to many aspects of coding and am searching for different specs and guidelines to aid me on my journey to crafting a wonderful game in Epic Games' Unreal Engine 4. I had some recent thoughts about the possibility of creating an environment in a game that interacts with weather (Rain, Snow, Storms) Is it possible to make an environment that can simulate weather changes in a game? I wrote notes on this for weeks now. I was thinking that an increase on environments occlusion maps was necessary for creating the effect of rain on windows, as well as making a flowing liquid surface on windows that is only visible in rain. I was also considering the idea of additive bump-maps on meshes for snow, to simulate accumulation. Are these elements dynamic in Unreal 4? Can I implement them?

  Read the article

• Learn about CRM and CX at Oracle Days 2012

  - by Richard Lefebvre

  Oracle Day 2012 features learning tracks and sessions tailored for accelerating your business in today’s environment. Oracle simplifies IT by investing in best-of-breed technologies at every layer of the technology stack and engineering them to work together so you can focus on driving your business forward. Throughout its history, Oracle has proved it can address the most complex IT challenges and solve the business problems of our customers. Discover Oracle’s strategy for powering innovation in the areas of Cloud, Social, Mobile, Business Operations, Data Center Optimization, Big Data and Analytics. Oracle Day 2012: Tracks     Engine for Growth: The business for optimized data center Powering innovation for your enterprise applications Architect your cloud: A blueprint for Cloud builders See more, Act faster: powering innovation with analytics Business operations: Powering business innovation Customer Experience: Empowering people, powering brands Check out the agenda at local even for more details

  Read the article

• Really weird situation with Swap that refuses to work

  - by Ghost

  So I decide to move my Swap partition to another HDD to make hibernation more fast, I create a partition with a liveUSB, do swapon, and then hibernate just disappears I go into the terminal, reactivate hibernate (so the button shows) for some reason the swap wasn't "on" so I do swapon again. Still not working. I go back to the terminal and edit the file with the UUID of the new swap partition. The partition shows as swap on gparted, it's on, the file has the right UUID, even the task manager shows a swap area of 10GB, and there is a hibernate button on the shutdown window. But it-wont-hibernate! What's going on?

  Read the article

• What You Said: How You Deal with Bacn

  - by Jason Fitzpatrick

  Earlier this week we asked you how you deal with Bacn—email you want, but not right now—and you responded. Read on to see the three principle ways HTG readers deal with Bacn. The approach you all took fell into three distinct categories: Filtering, Obfuscating, and Procrastinating. Readers like Ray and jigglypuff use filters: I use Thunderbird as my email client. I have different folders that I filter the email I receive into. The newsletters and other subscribed emails go into a lower priority folder. One word: Filters. I just setup filters for all of this type of mail. Some I let go to inbox, others I let go straight to a folder without seeing it first. Then when I have time or want to go through them, I do. HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

  Read the article

• Does data size in TCP/UDP make a difference on transmission time

  - by liortal

  While discussing the development of a network component for our game engine, a member of our team suggested that transmitting either 500 bytes or 1k of data using UDP makes no difference from performance perspective of the system (the time it takes to transmit the data). He actually said that as long as you don't cross the MTU size, the size of the transmitted data doesn't really matter as it's all the same. Is that true for UDP? what about TCP? That sounds just plain wrong to me, but i am not a network expert. *I've been reading about other companies' game networking architectures, and it seems they're all trying to keep transmitted data to a minimum, making my colleague's claims seem even more unreasonable.

  Read the article

• Ubuntu doesn't start and I can't login

  - by Meph00

  My ubuntu 13.04 doesn't boot anymore. Eternal black screen. If I press ALT+CTRL+F1 I see that it's stucked on "Checking battery state [OK]." I'd like to try to go with sudo apt-get install gdm but I can't login on terminal tty2, tty3 etc. They correctly ask for my nickname, then they make me wait a lot, ask for password and make me wait again. After a lot of time (... a lot) the best I could achieve was visualizing "Documentantion https://help.ubuntu.com". I can never reach the point where I can give commands. Plus, during the long pauses, every 2 minutes it gives a messagge like this: INFO: task XXX blocked for more than 120 seconds. Any suggestion? Sorry for my bad english and thanks everyone for the attention.

  Read the article

• Is there an AIR native extension to use GameCenter APIs for turn-based games?

  - by Phil

  I'm planning a turn based game using the iOS 5 GameCenter (GameKit) turn-based functions. Ideally I would program the game with AIR (I'm a Flash dev), but so far I can't seem to find any already available native extension that offers that (only basic GameCenter functions), so my questions are: Does anyone know if that already exists? And secondly how complex a task would it be to create an extension that does that? Are there any pitfalls I should be aware of etc.? ** UPDATE ** There does not seem a solution to the above from Adobe. For anyone who is interested check out the Adobe Gaming SDK. It contains a Game Center ANE which I've read contains options for multiplayer but not turn-based multiplayer, at least it's a start. Comes a bit late for me as I've already learned Obj-c!

  Read the article

• Want to make jar,war,ear files using apache ANT and use hudson for automated build process [closed]

  - by user1314506

  I want to make build.xml for following all task and i want to set up jenkins or Hudson for Continuous Integration How should i make build file using apache Ant and how to build all projects using single build file? mkdir MyProjectsjar Compile following project and create jar file javaproject1 package1 javafile1 javafile2 javaproject2 package1 javafiles package2 javafiles javaproject3 package1 javafiles javaproject4 package1 javaproject5 package1 javafiles package2 javafiles javaproject6 package1 javaproject7 package1 javafiles javaproject8 package1 javafiles javaproject9 package1 javafiles package2 javafiles javaproject10 package1 javafiles package2 javafiles javaproject11 package1 javafiles package2 javafiles javaproject12 package1 javafiles package2 javafiles javaproject13 package1 javafiles package2 javafiles javaproject14 package1 javafiles package2 javafiles javaproject15 package1 javafiles package2 javafiles javaproject16 package1 javafiles package2 javafiles javaproject17 package1 javafiles package2 javafiles Copy the above jar files into the folder created in step 1 Compile EJB projects and Create EAR project Compile web projects and other all project and create WAR files copy EAR and WAR files to jboss/default/deploy folder.

  Read the article

• Determine how to display a tile based on surrounding tiles

  - by Jsmith

  I have a game engine which generates maps randomly, set on a 2d grid which is composed of 34px square graphical tiles. These tiles can be displayed in any of three ways, wall, corner, and floor(exists in 2 states, passable and impassible), and four directions, north, south, west and east. What I need to do is, based on the tiles around each individual tile, determine which state to display the tile in, e.g. north wall, northeast corner, floor so that when a player alters the map, the tiles around the affected tile adjust themselves to suit(i.e. tunneling). In case it becomes important, all gameobjects are inherited from the same class, whether they be players, NPC's, walls, or items.

  Read the article

• How to run ubuntu-tweak's janitor automatically?

  - by Eliran Malka

  My aim is to have the janitor running at startup, with a pre-configured profile (e.g. clear redundant packages and browser cache). The website is lacking any documentation or usage instructions, and I could not find any information on this here as well. I tried, naturally, to start ubuntu-tweak from the command line, hoping additional API exists that will come through in this (allegedly) simple task. I only got as far as: ubuntu-tweak -f janitor which is a step in the right direction, but what's still missing is a command for the clear action. Is such a command available, or is there any better way of achieving the desired behavior?

  Read the article

• How to get output from upstart jobs when logged in via SSH?

  - by Binarus

  Hi, at the moment, I am trying to learn upstart and can't get around a basic problem. To monitor what my job definitions are doing, I would like to see text output from the jobs. That does not seem to be possible when I am logged on via SSH. Currently, I am having this problem with Natty 11.04, but I am convinced that it is a more common one. Probably I just don't know about some important, yet very basic, fact. A simple job file I use (filename /etc/init/test.conf): description "test" start on test console owner kill timeout 5 task script /bin/echo Gotcha... end script My goal is to see the text "Gotcha..." when doing "initctl emit test" or "initctl start test". But that does not work. What I have tried so far: "console output" instead of "console owner" "exec /bin/echo Gotcha..." instead of script...end script I am grateful for any advice. Thank you very much, Binarus

  Read the article

• If you had the power to remove one thing in your daily job, what would it be?

  - by Pierre 303

  With nearly 60 answers to this question it's highly likely that your answer has already been posted. Please don't post an answer unless you have something new to say This can be a particular task you find not very useful, a manager behavior, your canteen, some security rule you must comply to, tools they want you to use, commuting, schedules, a customer, a technical problem you encouter all the time, anything, ... please be creative ;) One answer per thing. Explain why. Please vote up on other answers if appropriate.

  Read the article

• Adobe AIR install problem, Ubuntu x64 14.04

  - by Den Rimus

  Haven't seen this kind of error on askubuntu yet. Did everything as it says here: How can I install Adobe AIR? After sudo ./AdobeAIRInstaller.bin shows this image: dropbox.com/s/wg6cv03h5n1tqgr/adobe_air.png Meanwhile terminal shows a bunch of such messages: (setup:2579): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine", Nothing is installed. Those murrine - it showed another code before ( another than setup:2579) - I googled it, installed something, it showed another code - I googled it, installed something, etc. Doesn't seem to affect installation anyhow.

  Read the article

• Construct sentences from tabular data

  - by Sumeet

  I have a huge set of html files an have to retrieve the meaningful information from them. Most of the task is accomplished, now the problem is with HTML tables. I have some literature on how to extract meaningful tables from html, but my problem is with creating meaningful sentences from tabular data (or attribute value pairs extracted from a table). Are there any NLP/Machine learning techniques to do this? Here is what I expect. Suppose below is a sample table: col_Name: Sumeet col_year: 2011 col_winner: quiz Can this be made to something meaningful like "Sumeet won quiz in 2011"?

  Read the article

• Don’t Like New Google Search Interface? Switch To Old Interface

  - by Gopinath

  Google recently adopted a new user interface layout for it’s search engine. The new layout is very different to classic one, it provides many options on the left side to choose for enhanced search operations. Even though many users like this new interface, there are few who are more comfortable with the classic interface. If you are one among those who wanted to switch back to classic interface, you can access it by using the following http://www.google.com/webhp?hl=all Join us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• Need help with gimp 2.8 (cpu not used to full capacity) [closed]

  - by Birgir Freyr

  I know this isn't the right place to ask this question but maybe some one here can point me out to were I should place this question (or help me fix it :)). Since I updated Gimp to 2.8 (and let me start by saying how happy I am with the new gimp) I have notice that Gimp only uses 35% max of my CPU power. I have tried changing settings, assigning only one CPU to Gimp (both in gimp preference and in windblows task manager). No matter what settings I choose it only uses 35% of the cpu. If I assign just one Core to it then Gimp will use 100% of that core (which is about 35% of a three core processor I have. Any thoughts? I am using Windblows 7 64 bit, gimp 2.8.0, AMD a6-3500 cpu. I also use Ubuntu (am going to see if it works the same there). Any help would be great.

  Read the article

• Calculating the force of an impact?

  - by meds

  I'm trying to figure out a way to determine the force two objects collide in. I have two vectors defining their linear velocity at the time of impact, their mass and their angular velocity. Keep in mind this is all for a 2D physics engine. I don't think it's as simple as adding up these values and figuring out if it's large enogh it makes a large impact since that doesn't take into account if the two objects are travelling in the same direction (as an example). Any ideas?

  Read the article

• Career in Artificial Intelligence [closed]

  - by Rohit S

  AI has many branches and seems like it has a bigger scope. I have seen a tutorial of Neural Networks and I'm a little confused whether Neural Networks is another branch of AI or it is a technique which is being used in branches of AI. I am mainly interested in creating software like Neural Networks that can be trained for doing a task. I like to make things automated with programming languages. So can I start with Neural Networks? And also a very important matter: what will be the scope of a job in future and in which companies?

  Read the article

< Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >