Search Results

Search found 14079 results on 564 pages for 'folding at home'.

Page 364/564 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• Routing from the DMZ to the interior network only

  - by Allan

  I have a home network connected to Verizon's FIOS service. Verizon's ActionTec router is connected to the ONT via coax to establish the MOCA network. My DD-WRT router's WAN port is connected to one of the ActionTec's LAN ports. The DD-WRT router is configured with a static IP address and assigned to the DMZ (this is done so I only have to configure port forwarding once). My issue is that this does not allow computers connected to the DD-WRT to serve streaming audio/video to the MOCA network using Verizon's Media Manager. I know that Media Manager uses ports 18001, 5050, and 5060, but I don't know how to forward those ports so that they are only available to the ActionTec's network and not the rest of the internet.

  Read the article

• Automate the backup of my databases and files with cron

  - by Patrick

  hi, I want to automate the backup of my databases and files with cron. Should I add the following lines to crontab ? mysqldump -u root -pPASSWORD database_name | gzip > /home/backup/database_`date +\%m-\%d-\%Y`.sql.gz svn commit -m "Committing the working copy containing the database dump" First of all, is this a good approach? It is not clear how to specify the repository and the working copy with svn? How can I run svn only when the mysqldump is done and not before ? Avoiding conflicts

  Read the article

• Agile project management, agile development: early integration

  - by Matías Fidemraizer

  I believe that agile works if everything is agile. In software development area, in my opinion, if team members' code is integrated early, code will be more in sync and this has a lot of pros: Early integration helps team members to avoid painful merges. Encourages better coding habits, because everyone makes sure that they don't break co-workers' code everyday. Both developers and architects (code reviewers) may detect bad design decisions or just wrong development directions in real-time, preventing useless work. Actually I'm talking about getting the latest version of code base and checking-in your own code to the source control in a daily basis. When you start your coding day (i.e. you arrive to your work), your first action is updating your code base with the latest version from the source control. In the other hand, when you're about an hour to leave from your work and go home, your last action is checking-in your code to the source control and be sure that your day work doesn't break the project's build process. Rather than updating and checking-in your code once you finished an entire task, I believe the best approach is fixing small and flexible personal milestones and checking-in the code once you finish one of these. I really believe that this coding approach fits better in the agile project management concept. Do you know some document, blog post, wiki, article or whatever that you can suggest me that could be in sync with my opinion?. And, do you find any problem working with this approach?. Thank you in advance.

  Read the article

• firefox addons and their silly news tabs

  - by jettero

  Something like 30% of the addons I have in firefox update every other week and feel the need to pop open a tab about how awesome they are and all the cool things they changed. I just don't care at all and I'm very annoyed by these news tabs. When firefox opens, I want to see my home page. I've been looking for an addon to disable or kill them before I even have to look at them. Rather like addblock-for-addons. Short of finding a plugin that disables them, I'm seeking information about common interfaces so I can try to figure it out on my own. I'm wondering if I could do it in greasemonkey somehow. For example, is there something common about the url for the tabs?

  Read the article

• 'server was unable to allocate from the system nonpaged pool' error

  - by cop1152

  Currently users at my company are unable to access their home folder (or any folder on our domain controller). I am working remotely and cant physically access the machine until tomorrow morning, but I can access it with RDC. When I attempt to ping other machines on our network from the machine in question (connected with RDC), I immediately get the error PING: transmit failed. error code 1450. Event Viewer is full of 2019 errors: The server was unable to allocate from the system nonpaged pool because the pool was empty Does anyone have experience with this specific issue? I have found some info with Google, but would like to hear what the pros at SF have top say. This is a Windows 2000 server.

  Read the article

• Cannot start Oracle XE 11gR2 Net Listener and Database on Ubuntu 13.04

  - by hydrology

  I have been following the setup step on this article for installing Oracle XE 11g R2 on Ubuntu 13.04. The environment variables PATH, ORACLE_HOME, ORACLE_SID, NLS_LANG ORACLE_BASE have all been set up correctly. simongao:~ 06:16:38$ echo $PATH /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/simongao/adt-bundle-linux-x86_64-20130219/sdk/platform-tools:/u01/app/oracle/product/11.2.0/xe/bin simongao:~ 06:18:36$ echo $ORACLE_HOME /u01/app/oracle/product/11.2.0/xe simongao:~ 06:23:29$ echo $ORACLE_SID XE simongao:~ 06:23:35$ echo $ORACLE_BASE /u01/app/oracle simongao:~ 06:23:37$ sudo echo $LD_LIBRARY_PATH /u01/app/oracle/product/11.2.0/xe/lib simongao:~ 06:23:48$ echo $NLS_LANG /u01/app/oracle/product/11.2.0/xe/bin/nls_lang.sh However, when I try to startup the service, I receive the following error information. simongao:~ 06:18:40$ sudo service oracle-xe start Starting Oracle Net Listener. Starting Oracle Database 11g Express Edition instance. Failed to start Oracle Net Listener using /u01/app/oracle/product/11.2.0/xe/bin/tnslsnr and Oracle Express Database using /u01/app/oracle/product/11.2.0/xe/bin/sqlplus.

  Read the article

• Header unset Server not working for static files

  - by Sam Lee

  I'm trying to unset the "Server" field in response headers. I do this using Header unset Server, and that works fine for requests handled by mod_perl. However, for requests to /static I use Apache to serve static files. For some reason, when these files are loaded directly in the browser, the Server field is not removed. How can I go about fixing this? Relevent parts of my httpd.conf: LoadModule headers_module modules/mod_headers.so Header unset Server <VirtualHost *:80> <Location /> SetHandler modperl PerlResponseHandler MyHandler </Location> Alias /static/ /home/site/static/ <Location /static> SetHandler None </Location> </VirtualHost>

  Read the article

• Browser language detection & content ranking for new language on the same site.

  - by Arnaud

  I've been reading a lot about it but it's still really hard to make up my mind. My understand is that if your website provide a link to the other language, this should not be an issue for google as long as your links are clear and clean, google will be able to make his way through it. The website was orginaly in french and I added the english version and I'm just worry that english speaker will just leave if the site is not in the correct language, for the home page I just wanted to get the value from the browser and redirect it to /fr/ or /en/ for the first page. (using php this will be very easy) Could you guys have a look at it and tell me what you think about it http://tinyurl.com/bpc5bn9 I don't want to get it wrong and lost my ranking with google. Also the website has good rank on the french side and the english has been online for 2 weeks and only get few visit a day, is that because all the back link refer to /fr/ and google is cleaver enough to decide that they are 2 differantes website and the back link will have to point to /en/ to increase the ranking value? Or will take few more weeks for the website to grow? Thanks for your hep

  Read the article

• Cannot use scp on Mac OS X

  - by Robert

  Hi all, when I try to copy any file with scp on Mac OS X Snow Leopard from another machine I get this error: scp [email protected]:/home/me/file.zip . Password: ... ---> Couldn't open /dev/null: Permission denied this is the output of "ls -l /dev/null": crw-rw-rw- 1 root wheel 3, 2 May 14 14:10 /dev/null I am in the group wheel, and even if I do "sudo scp..." it doesn't work. It's driving me crazy, do you have any suggestion? Thanx!

  Read the article

• Managing arbitrary user permissions under PureFTPd

  - by Sebastián Grignoli

  I need to provide an FTP service that needs to be web-managed in the simplest way possible. My customer wants to create folders and users, and give them read only or read/write access arbitrarily. For example: The folder 'Documents' should be read only for several users, writable for internal users, and invisible for the rest. The folder 'Pictures' should be read only for journalists, writable for associates, and invisible for the rest. The folder 'Media' should be read only, writable or invisible for arbitrary users specified on the admin. There could be a large number of users and folders. I can't find a good way to accomplish that. I thought that I could give each user a home folder and put symlinks for the folders he has read access to, and make the user part of the folder's group when he has write access too, but now I think that this wouldn't work, because with PureFTPd (or ProFTPd) I can only specify the virtual user's mapping to a system user, and only one GUID for each virtual user. My approach requires that I could specify several GUIDs for each user (one by each folder he has write access to). I need to start programming this admin and I still don't know wich approach would work, if any. ¿Any ideas?

  Read the article

• Python Profiling not installed in Ubuntu? How do I get it in a virtualenv and without apt-get?

  - by interstar

  According to the Python documentation, the "profile" module is part of the standard library. But I can't find it. On my home machine, I was able to add it using apt-get install. (ie. it's split out into a separate ubuntu package.) On my work machine, (also ubuntu) I'm running in a virtualenv, so apt-get install isn't relevant. I can install python modules from pypi using easy-install, but I can't see anything on pypi which corresponds to the profiling module. (Presumably because it's meant to be part of the standard python install.) So how can I install it in this environment?

  Read the article

• Boot existing ubuntu installation on uefi, GPT BTRFS

  - by user204720

  I have looked through many of the questions, and haven't found anything that quite satisfies this problem. I have an ssd hard drive that is bootable from my old computer. It is a standard BIOS, however, I built a new computer with Z87 motherboard that is a UEFI. What I'd like to do is boot from this hard drive without wiping out the hard drive. I've tried booting from legacy mode, doesn't seem to work. Part of the multitude of problems is my partitioning scheme, which is GPT. sdx1 is the btrfs system, sdx2 swap, sdx3 is bios_grub. I've tried setting the UEFI/BIOS to boot in legacy mode, I've tried turning my swap partition into a Grub EFI boot, I've tried copying the file system onto a new drive installed on the new system. However, copying the information doesn't keep the filesystem or subvolumes intact. I've also tried boot-repair which is when I overwrote the swap space. I'd really rather not start over on a new install, so any other suggested trees to bark up would be appreciated. For the record, I hate you Microsoft, and ASUS I understand complying with microsoft, but make it optional... I'm really disappointed in that I have to deal with Windows 8 when I have nothing to do with it. Something I think I could try, but would like to hear from more experienced users. Moving the sdx1 (btrfs /@/@home) partion and opening up a 100 MB partition on the beginning sectors and install efi compatible Grub2 installation. Would it work? How to move a partition?

  Read the article

• Run a local command after closing an SSH connection?

  - by James B

  I've set up my zsh to update the XTerm title whenever I change directories. It's neat! Unfortunately I have one common problem, which is this: % cd foo; # title changes to "host1:~/foo" % ssh host2; # title changes to "host2:~" % pwd /home/user/foo # title is still "host2:~" I need to run some command anytime an ssh connection terminates, either chpwd, or cd ., or something similar. I don't think I can use an alias, because I'd need something like alias ssh=ssh $*; cd . but AFAICT you can't pick where the arguments go in an alias.

  Read the article

• Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

  - by Tim

  Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

  Read the article

• Remote Desktop over SSH SOCKS proxy to bypass firewall

  - by scrumpyjack

  Hi folks, I'm trying to connect to a Windows server from my Mac using RDC2.1 for Mac. The problem is the server I need to connect to is guarded by the evil dragon - IP-based access control on a completely separate network. I have an IP I can get in on, but it's at my office (i.e. a completely separate network). Because that network isn't set up for VPN, I've set up a SOCKS proxy through an SSH tunnel (which is all working fine). (SSH proxy) Me (on my Mac) ----------> Office Linux box ----> Windows server (home network) (office network) (other network) From my Linux server in my office (the SSH server) I can telnet to port 3389 on the Windows server, no problem. But from my Mac I can't get so much as a squeak out of it. Any ideas?

  Read the article

• Apache Rewrite Rules breaking each other?

  - by neezer

  I have this rule: RewriteCond %{REQUEST_URI} ^/(manhattan|queens|westchester|new-jersey|bronx|brooklyn)-apartments/.*$ RewriteCond %{REQUEST_URI} !^/guide/(.*)$ RewriteRule ^(.*)$ /home/neezer/public-html/domain.com/guide/$1 [L] Which works great on it's own. Essentially, I have a bunch of directories that have a bunch of files in them that I want to keep in the "/guide" folder, but I want them to appear at the web root for SEO reasons. This rule works, but unfortunately the original URL's still work too (with "/guide"). I want to 301 Redirect the ones with "/guide" in the URL to those without, without actually moving the files on the server. I tried adding this rule: RewriteCond %{REQUEST_URI} ^/guide/(manhattan|queens|westchester|new-jersey|bronx|brooklyn)-apartments/.*$ RewriteRule ^guide/(.*)$ http://www.domain.com/$1 [R=301,L] ... but that breaks my first rule completely. Any thoughts about what I might be doing wrong? Please let me know if you need to know anything else from me to help me with this issue.

  Read the article

• Determine which software product a Microsoft Product Key activates

  - by druciferre

  Without a product key being labelled, is there is any way to identify what Microsoft software product a given product key is meant to activate? Let's say for example I had the product key ABCDE-FGHIJ-KLMNO-PQRST-UVWXY, but I had no clue if was meant for Windows 7 Ultimate, Windows 7 Home Premium, Vista Ultimate, or even Office 2010. Does Microsoft (or anyone for that matter) have any kind of tool that I could paste the key into and get a result that identifies the software product the key is meant for (or at least a good estimate)? Note: I have searched and searched many times on the Internet, but the only results I ever find are how to recover a lost product key by using something like Nirsoft ProduKey. This is not what I am looking for.

  Read the article

• Using a PC + headset as a telephone without VOIP

  - by user76782

  I'm trying to find a way to realize a decentralized callcenter, so that the callcenter agents can talk from their home office with just a PC + headset. The big challange is that some of the agents have very low bandwith and the quality with VOIP is too bad. So my question is: What other solutions are possible when VOIP is not a option? What exactly do I need to do if I try to achieve this with for example Landline/PBX or GSM? (e.g. Which software do I need to install? Which device do I need?)

  Read the article

• My KDE very slow in certain operations

  - by Pietro

  I have a problem with my Linux installation. It seems that the KDE code that deals with directory windows is extremely slow (on both Dolphin and Konqueror). This happens both when I click on a directory icon and when I want to open/save a file from many KDE applications. The time the window takes to open can be one minute or more. The same happens when I right click on an icon. Looking at the CPU usage, this is very low (less than 10%). Am I the only one with this problem, or is it well known and maybe already fixed? Consider that I cannot update to a more recent version of OpenSuse. Thank you, Pietro Configuration: Linux version: OpenSuse 11.4 KDE 4.6.0 System: DELL Precision T3500 - Intel Xeon Home directory mounted on a remote drive. <-- could this be the reason?

  Read the article

• Browsing not working in Windows 8

  - by Jonathan Perry

  I'm using Windows 8 Professional installed on Windows 7 using the "Save my preferences and apps" installation option. The Windows works great, apps are downloading and I can listen to online radio stations using the TuneIn radio app meaning the internet connection is alive, however, when I open a browser (either Chrome or IE10) and try to browse the internet, I'm getting an "Unable to resolve DNS" error message. Prior to installing the internet browsing worked flawlessly I must say. I'm using ESET NOD32 Antivirus so I suspect that it might interfere with the web connection now, but I'm not so sure. Internet options show that the PC is set to resolve the DNS automatically. I don't know what to do. My other Win7 PCs in my wifi home network are connecting to the internet without any issues. If anyone can help me resolve this I'll be grateful :) Thanks

  Read the article

• Why is my connection to Playstation Network so unreliable? [closed]

  - by jammus

  Hello friends. I'm 28 and my girlfriend is 24. Our home internet connection is pretty reliable, it's almost always up and can get fairly high download speeds. However, my experience with the Playstation Network is pretty frustrating. I'm always getting kicked off or getting quite high latency. Are there any tips or tricks that you might help my on-line gaming run more smoothly? I'm using a wireless connection for the PS3, is this likely to affect things?

  Read the article

• zeroconf (bonjour/avahi): macs do not see linuxes and vice versa

  - by codesnik

  In my home network I have several OS X boxes and several Ubuntu boxes. each Ubuntu box sees other boxes via zeroconf. I can "ssh ubuntu1.local" and "ping ubuntu1.local" from "ubuntu2.local", but both fail to lookup OSX boxes. and other way around, I can "ssh mini1.local" from "mbair.local". but it doesn't see "ubuntu1.local" why? do ubuntu and osx use different flavours of zeroconf? could be ubuntu, or osx tweaked to use common flavour?

  Read the article

• A project idea I've got...

  - by Mr Teeth

  Hi, Next year I will be doing a final year project at Uni. I've already thought of one and was wondering what you guys think of it. I want to create a University Information Search for prospective students who are trying to look for an affordable University to attend. It will depend on the student's family income and the grades they get. They enter in those two parameters (and some more) and it comes up with a list of suitable Unis based on their criteria. This is not about the price of tution fee. It's mostly to do with the cost of living. Stuff like: Rent (if living in a private flat). Student Accomadation. Cost of traveling to your home and back (for holidays). ...and some other stuff stuff I haven't thought about yet. It'll mostly be GUI driven with some textual information. I'm also thinking of using it as a website interface. What do you guys think? Can I program something like this Java? If there's any holes you see in my idea please tell me.

  Read the article

• De-index URL paremeters

  - by Doug Firr

  Upon reading over this question is lengthy so allow me to provide a one sentence summary: I need to get Google to de-index URLs that have certain parameters appended I have a website example.com with language translations. There used to be many translations but I deleted them all so that only English (Default) and French options remain. When one selects a language option a parameter is aded to the URL. For example, the home page: https://example.com (default) https://example.com/main?l=fr_FR (French) I added a robots.txt to stop Google from crawling any of the language translations: # robots.txt generated at http://www.mcanerin.com User-agent: * Disallow: Disallow: /cgi-bin/ Disallow: /*?l= So any pages containing "?l=" should not be crawled. I checked in GWT using the robots testing tool. It works. But under html improvements the previously crawled language translation URLs remain indexed. The internet says to add a 404 to the header of the removed URLs so the Googles knows to de-index it. I checked to see what my CMS would throw up if I visited one of the URLs that should no longer exist. This URL was listed in GWT under duplicate title tags (One of the reasons I want to scrub up my URLS) https://example.com/reports/view/884?l=vi_VN&l=hy_AM This URL should not exist - I removed the language translations. The page loads when it should not! I played around. I typed example.com?whatever123 It seems that parameters always load as long as everything before the question mark is a real URL. So if Google has indexed all these URLS with parameters how do I remove them? I cannot check if a 404 is being generated because the page always loads because it's a parameter that needs to be de-indexed.

  Read the article

• Ubuntu 13.04 client cannot connect to Raspbian samba share

  - by envoyweb

  I have a client Ubuntu 13.04 machine trying to connect to a server running Raspbian with samba and samba-common-bin installed on the server I can see my share and when I try to login I get this error: Unable to access location: Failed to write windows share Cannot allocate memory. I have installed ntfs-3g for the usb hard drive that already auto mounts on the server so I never had to create a directory or edit fstab. Testparm on the server states the following: [global] workgroup = ENVOYWEB server string = %h server map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [homes] comment = Home Directories valid users = %S create mask = 0700 directory mask = 0700 browseable = No [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [BigDude] comment = Sharing BigDude's Files path = /media/BigDude/ valid users = @users read only = No create mask = 0755 testparm on the client which is running ubuntu is as follows [global] workgroup = ENVOYWEB server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >