Search Results

Search found 98288 results on 3932 pages for 'user interface'.

Page 373/3932 | < Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >

  • Ubuntu SSH issue

    - by palani
    Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

    Read the article

  • Ubuntu SSH issue

    - by palani
    0 Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

    Read the article

  • Windows XP - Repairing Corrupt System32\Config\System File

    - by SimonTewsi
    My apologies for this long post. I would like to describe the mess I'm in then ask some questions about how to fix it: Starting up my Windows XP SP1 machine I got the following message: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Tried restarting several times with same results then Googled the problem. Tried the fix described here: http://icrontic.com/articles/repair%5Fwindows%5Fxp (since my CPU does not have XD buffer overflow protection I did not set /NOEXECUTE=OPTIN as OS Load Option). This did not work. I then found another fix for the problem on hardwareanalysis.com: Basically, boot to dos prompt (or recovery console if available) and make backups of the following files:- c:\windows\system32\config\system (to c:\windows\tmp\system.bak) c:\windows\system32\config\software (to c:\windows\tmp\software.bak) c:\windows\system32\config\sam (to c:\windows\tmp\sam.bak) c:\windows\system32\config\security (to c:\windows\tmp\security.bak) c:\windows\system32\config\default (to c:\windows\tmp\default.bak) then delete the above files (not the backups!) then copy the above files in c:\windows\repair to the c:\windows\system32\config directory restart your computer This did work (and I wish I'd done it first, since it was completely reversible, unlike the first method). However, afterwards I found that all the user accounts on the PC were gone. I resurrected them by copying the backed up security file back into the system32\config folder (I may have copied the SAM file from backup as well, I cannot remember clearly now). Now the PC boots up and I can log in. However things are still not right. I tried to alter one of the user accounts and found I could not access the User Accounts in the Control Panel. Microsoft KB 919292 had a fix for the problem. However, the fix failed with a Windows Installer error: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer 3.1 was already installed. I reinstalled it but continued to get the Windows Installer error whenever I tried to run the fix in KB 919292. I have since noticed another three problems: 1) Several applications on the PC no longer run, eg Microsoft Word. Shortcuts no longer seem to do anything and if I run the executables directly (eg for Word by running C:\Program Files\Microsoft Office\Office10\Winword.exe) I get a message similar to: "Microsoft Word has not been installed for the current user. Please run setup to install the application." even though the executable is clearly visible in Windows Explorer (and even though Word actually opens - the error dialog appears after Word has opened. Clicking OK to the error dialog closes Word). 2) One or the other of the two fixes I tried for the original problem caused new user profiles to be created. eg My old user profile under the Documents and Settings folder was Simon. The old one still exists but there is now a new one called Simon.DBQ2515. Obviously the new one is being used because Opera (my browser that still works) no longer sees the bookmarks file under my old profile. 3) Probably as a result of fooling around with the Security file, when I try to boot off the Windows XP CD and run the Recovery Console I am now asked for the administrator password. The only problem is there is no administrator account on the PC. There is one account, LocalAdmin, that has administrative rights but when I entered the password for that account it did not work. It is so long since I originally set up the PC that I cannot remember if the original administrator account ever had a password and, if so, what it was. So, my question is: How can I fix this mess? In particular: 1) Having tried the two fixes linked to above, have I irrepairably damaged the Windows instance, requiring a clean reinstallation of Windows + all applications, or should it be possible to get the machine working correctly again without such drastic measures? 2) Is there any way to get around the administrator password so I can use the Recovery Console again, given that there is no account called "administrator" and the password for the one account with admin privileges does not work (and that, before I started the second fix, I was not asked for an administrator password)? 3) Is there any easy way to fix the problem with the applications that think they are not installed? 4) Is there any easy way to fix the problem of the Windows Installer that does not work, even if reinstalled? Cheers Simon

    Read the article

  • VLC without chrome in Windows

    - by timberwo7ves
    I'm trying to run VLC (2.1, 64 bit) without any chrome on Windows 7. You can achieve it by going to Preferences, and in the Interface tab, unchecking Integrate video in interface, and also in the Video tab, unchecking Window decorations. The problem lies in the fact that without Window decorations there is no apparent way to move or resize the video window - in GOM player, for example, you can move window by dragging on the video itself; is there an option for this in VLC? Ideally, I would like to move the window by the method described above (by dragging the video), and would like the Window decorations to reappear on mouseover, to allow resizing; I'm a new VLC user, but unsure how far the customisation goes. - I'd settle with just the moving of the window via dragging the video if this is possible by advanced setting. There is a similar question here, but not exactly, and no solution to that particular question.

    Read the article

  • Web Server Users - Best Practice

    - by Toby
    I was wondering what is considered best practice when several developers/administrators require access to the same web server. Should there be one non-root user with a secure username and password unqiue to the web server which everyone logs in as or should there be a username for each person. I am leaning towards a username for each person to aid in logging etc however then does the same user keep the same credentials over several servers, or should at least their password change depending on the server they are on? Should any non-root user of the system be added to the sudoers file or is it best practice to leave everyone off it and only let root perform certain tasks? Any help would be greatly appreciated.

    Read the article

  • Psexec issue when running an application on a Windows Server 2008 R2 machine from a 2003 R2 machine

    - by Vermin
    I am trying to run an application on a Windows Server 2008 R2 machine from a Windows Server 2003 R2 machine using a batch file with the following line of code in a batch file: psexec \\nightmachine -u DOMAIN\User -p Password -i "C:\FilePath\Application.exe" argument1 argument2 The application fails to run correctly when started using psexec, but the application will run correctly if I have logged into the nightmachine with the same user and started it from its file path via cmd. I have been able to get hold of the error returned in the application from its log and the exception returned is the following: System.DllNotFoundException: Unable to load DLL 'rasapi32.dll': A dynamic link library (DLL) initialization routine failed. (Exception from HRESULT: 0x8007045A) After searching for that error code on the net, there are a lot of posts saying that this is caused by file corruption, but I cant see why that would be the case as the application will run normally when not being run from psexec. (the user is an administrator on both machines) Can anyone please help me on this? If any more information is needed to help solve this issue then please ask and I will do my best to post it.

    Read the article

  • WinXP on VPC - Unable to change the way users log on or off

    - by kamleshrao
    On my Win7 computer, I have setup a new Win-XP VPC. In the VPC window, when I click Ctrl+Alt+Del, it shows me Windows Task Manager. As per MS KB [ http://support.microsoft.com/kb/281980 ], we can change this behavior to show the regular Windows Security window. But while making this change, I am getting the following error: User Accounts Fast User Switching cannot be turned off from a remote connection to this computer. Log on to the computer locally to turn off Fast User Switching. OK Is there any way I can fix this setting?

    Read the article

  • virtualbox and nginx server_name

    - by Ivan
    I'm trying to configure gitlab running in an Ubuntu 12.04 guest with Windows7 host. I can ssh the guest using port-forwarding and access the nginx server using port redirection (8888 in host is 80 in guest, so localhost:8888 in host gets to the nginx server in the guest), but the server_name in nginx configuration file is giving me trouble. What is the correct listen and server_name that nginx would accept? The guest has the NAT interface at 10.0.2.15 and Host-Only interface at 192.168.56.101, static. Thanks!

    Read the article

  • SSH authentification with public key fails

    - by palani
    I have my id_rsa.pub key under my /home/user/.ssh. I carefully copied that key and paste my key to respository Git account. While trying to connect from my local system to my git respository, I got the following error: warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.) I removed SSH in system and re-enable and did again, but no luck. I have no idea what's happening with my SSH key. Can any one please tell me on this? Note : I noticed in my home /home/user/.ssh && /home/user/.ssh2

    Read the article

  • How do I start control panel with runas in Windows XP?

    - by MrVimes
    Sometimes I need to make a config change on another user's PC. The user doesn't have admin rights so I try to start control panel using the runas command. I can start other stuff with the command but if I try to start control panel nothing happens. It doesn't even give me an error message. Alternatively I start another command prompt as admin (using the runas command again) and from that try to start control panel. Still no joy. Is control panel designed not to be startable from a non-admin profile as an admin user?

    Read the article

  • Microsoft CALs for Domain Controller

    - by Damo
    I am designing a network and I've come to the point of specifying out the number of CALs required for this network. Microsoft licensing has always confused me, it's just not always clear to me. I plan to have 1 2008 std domain controller, another 2008 server (not a domain controller) and 200 Windows 7 devices connected to the domain for domain services. The 200 W7 devices will all authenticate to the domain controller with the same domain account. (this is a special type of network, not a user workstation network) Therefore, do I need to purchase 200 CALS for the 200 devices, or can I purchase say 10 CALS (user CALS) as the amount of unique user accounts is very low. Many thanks for looking.

    Read the article

  • Connecting via ShrewSoft VPN client means no LAN internet access (Windows 7 64 bit) - any advice please?

    - by iwishiknewmoreaboutnetworking
    I have a Windows 7 64 bit desktop machine which is connected to a LAN. I recently installed ShrewSoft VPN client v 2.1.7 on my machine so that I can connect to a license server hosted by my customer. They are running a Cisco VPN server and I originally tried (unsuccessfully!) to use the Cisco VPN client for Windows 64 bit but the default gateway wasn't being configured correctly after loading in my pcf file. Using ShrewSoft I am able to import the same pcf file, and successfully connect to the machine I need to using the VPN client software. The client machine I need to connect to has IP address 1.52.90.33. The problem is that when I am connected to the customer network using the VPN client application (and after a few minutes) I lose my LAN internet connection. I can only presume that this is because, by default the ShrewSoft VPN client application automatically tunnels all traffic through the VPN connection. I know there is an option to switch off the "Tunnel All" option on the Policy tab of the application and enter a Remote Network Resource (to "Include" or "Exclude") as "Address" and "Netmask" IP addresses however I am not sure what I need to enter here. Here is my ipconfig output before connecting to the VPN (with suffixes blanked out): Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : ***.*** Link-local IPv6 Address . . . . . : fe80::8de3:9dbe:393a:33ba%11 IPv4 Address. . . . . . . . . . . : 150.237.13.17 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 150.237.13.1 Tunnel adapter 6TO4 Adapter: Connection-specific DNS Suffix . : ***.*** IPv6 Address. . . . . . . . . . . : 2002:96ed:d11::96ed:d11 Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301 Tunnel adapter Local Area Connection* 9: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:2cf9:38c4:6912:f2ee Link-local IPv6 Address . . . . . : fe80::2cf9:38c4:6912:f2ee%12 Default Gateway . . . . . . . . . : Tunnel adapter isatap.***.***: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : ***.*** Here is my route print output before connecting to the VPN: =========================================================================== Interface List 11...20 cf 30 9d ec 2a ......Realtek RTL8168D/8111D Family PCI-E Gigabit Ethern et NIC (NDIS 6.20) 1...........................Software Loopback Interface 1 14...00 00 00 00 00 00 00 e0 Microsoft 6to4 Adapter 12...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 150.237.13.1 150.237.13.17 2 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 150.237.13.0 255.255.255.0 On-link 150.237.13.17 257 150.237.13.17 255.255.255.255 On-link 150.237.13.17 257 150.237.13.255 255.255.255.255 On-link 150.237.13.17 257 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 150.237.13.17 257 255.255.255.255 255.255.255.255 On-link 12

    Read the article

  • How to define a Crystal Report to Windows Default-Printer with a certain papertray

    - by Ice
    I got the job to design some reports with crystal reports XI for a user-group of nearby 20 peoples. Each user has his own printer on his desk. These printers are attached to the network and are served by a print server. The users have thin-clients and are served by citrix with desktops and so has each user his own windows default printer defined. All printers are from the same type and have some papertrays. the reports in question have to go on paper-tray number 3. I have one *.rpt File and so there is one possibility to define a printer and a paper-tray, but how do i define the windows 'default' printer?

    Read the article

  • How do I stop GNU Freetalk from automatically filling in the buddy name?

    - by Journeyman Geek
    I'm using GNU Freetalk along with expect in order to send notifications to my phone – Freetalk has a readline interface, and I use expect to make a series of non interactive scripts that send information to another Jabber account. I'd like to have these scripts end freetalk 'properly' – that is to say user@domainname message one user@domainname message two /quit which would print out message one message two then quit. However Freetalk 'helpfully' adds user@domainame automatically so I get message one message two /quit as the output. The expect script still ends, but there's a delay. How would I stop Freetalk from adding in the 'buddy' address automatically?

    Read the article

  • Xterm is not completely erasing field lines

    - by user26367
    We have a SSH tunnel to a remote unix box from Windows clients using Cygwin. It launches a terminal program from the unix box locally on the Windows box for data input. The xterm window is launched as follows xterm -fn 10x20 -bg DodgerBlue4 -fg white -cr white -ls -geometry 90x30 -e program When a screen goes from read only mode to edit mode, the edit fields have ____. When going back to read only mode, a single pixel artifact is left behind for each field. *readonly* User: *edit* User: ___________ *after edit exit* User: . <- this dot is left behind Any idea what we need to change to fix this?

    Read the article

  • Remote connection to dynamic public ip & private ip addresses

    - by user51737
    Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

    Read the article

  • Credentials needed for BT line on Netgear router

    - by Bali C
    I have recently bought a new Netgear router to replace my current BTHomeHub as it doesn't support wireless. I did buy a WAP but figured it would be easier to use a router with wireless built in. (It's a modem/router combo). I have got as far as setting up the router on the web interface, but then it asks for a username and password to connect to the net, I can only assume this is for the phone line? I have tried some passwords I could find written down but they don't work, the internet light comes on and then when the creds fail it goes off. I have been on the homehubs web interface and been through all the settings it has to find the credentials it is using which obviously work, but no joy. Is there anything obvious I am missing, or is there a way I can retrieve my settings from my existing router? Any pointers will be very appreciated.

    Read the article

  • Multiple SMTP servers in Thunderbird3

    - by ldigas
    Situation: 2 mail accounts - each with its own pop3 and smtp servers, accesed normally. Except, when using Vodafone mobile network (you know, those usb or pcmcia cards ...) in which case mails are send using Vodafone's SMTP server. I configured both accounts in thunderbird for their default servers, and then added under multiple identities, another called Name of User (mobile) for each account. And it works. Except, I don't like the fact that when I send mail using mobile smtp server it sends them under Name of User (mobile) <-- the mobile part being important. I could of course, delete that part, but then when sending mail, I'd have no way of differenting between the two. They'd both look as Name of User email@address_of_user.com. So, what would be the easiest way to solve this ? It is not a major problem, but it is annoying.

    Read the article

  • How can I open a shared sub calendar in Outlook 2010?

    - by Matt Love
    There is a team in my office that has a shared calendar (the team calendar is set up as a user in Active Directory/Exchange, so treat the team as a user). The team also has 3 sub-calendars for the different team members. Other people in the office need to be able to access this team's calendar. They can go to Open Calendar in Outlook and see the main calendar, but they cannot see the sub-calendars. The sub-calendars all have the Default user permissions set to Reviewer. If you go to File → Account Settings → Change [logged in Exchange account] → More Settings → Advanced and add the team's mailbox, it does show the calendars in Outlook, but it comes up under My Calendars instead of Shared Calendars. We need to be able to go to Open Calendar and open the calendar and open all the sub-calendars this way. How is this possible?

    Read the article

  • No file sharing between two server 2008 R2 machines.

    - by ProfKaos
    I have just replaced XP with Server 2008 R2 on my test sever, and have been running 2008 R2 on my dev laptop. When my server was still XP, file sharing just worked, but now it just doesn't. I've enabled everything I can about sharing, and I can ping the server by machine name, but if I try an access a share, I get asked for a password. The passowrd dialog assumes a domain for this user, but neither my laptop admin user nor my server admin user can get past this login. What am I doing wrong?

    Read the article

  • Access port on machine by connecting to other machine via SSH?

    - by piquadrat
    I have to access my home router's web interface on port 80. Unfortunately, the only way into the network I have at the moment is SSH to another machine on the same network. me ---|---SSH Box----Home Router My Google foo seems to have abandoned me, I couldn't didn't find anything helpful. Any ideas? Thanks! To clarify: I'm not at home right now. I do however have access to one machine on the network (a QNAP NAS) over SSH. I need to access the home router web interface on port 80 from my notebook which is outside of the home network.

    Read the article

  • Debian/Ubuntu apt or pbuilder without root privileges?

    - by Tem Pora
    I want to use apt or pbuilder to build a package in user's home directory. The home directory has enough space to hold the package's source, its dependencies and binary output. But the apt and pbuilder documents say that you have to be a root user (sudo) to use it. It's frustrating, as the only way now I have at my disposal is to build the package from source or use the dumba$$ (sorry for bad language) dpkg and in both cases figure out every dependency manually, create the dir layout manually and install the built things manually. Now if I can do all these things manually, why the tool writers (apt) think that doing so using their tool (apt) is somehow more special/dangerous? I don't want to use root privileges JUST to build and test a user-land package. If I am NOT allowed to do anything outside my home dir then why NOT the apt or pbuilder type commands be allowed to "build" something in my home dir without root privileges? I just want to use their functionality. It seems there is nothing like Gentoo Prefix from Debian

    Read the article

  • Recording Interfaces for OS X that are supported/work well?

    - by Troggy
    For os x, I would like to know what other audio production/music recording interface type products people have found to work well with os x? I do not want to know about stuff that only works. I want to know about solid products that work well and are supported well by the company when issues arise. I for example have a M-Audio Firewire Solo recording interface. I have found M-Audio to be a company with great mac support for their products and they integrate well with os x features and apple software. Clarification: I am wondering about the recording interfaces themselves, as in the hardware, that are compatible with os x and supported/work/integrate well.

    Read the article

  • Write permissions denied on linked tables between MS Access 2003 and 2007

    - by STEVE KING
    We are in the process of switching over to Access 2007. We have numerous data tables in Access 2003 files. In one case, the user has 2007 on his PC and opened the front end in 2007. No problems. When the the user is done, he clicks a button that executes a macro full of update queries. The macro reaches the first query and halts. We get a message saying we do not have permissions to write to this linked table (2003 format). There were no security files involved. We re-linked from 2007, same problem. LAN permssions were ok. I wound up having to import the tables to front end in order for the user to be able to do his job.

    Read the article

< Previous Page | 369 370 371 372 373 374 375 376 377 378 379 380  | Next Page >