Search Results

Search found 18805 results on 753 pages for 'security center'.

Page 374/753 | < Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >

• OpenVPN bridged not pinging beyond openvpn server on Ubuntu/Windows 2003

  - by ani

  I set up an OpenVPN server using Ubuntu and a windows server 2003 client to interconnect two networks between two different offices. They can now ping each other, but the rest of the network cannot be contacted by the windows client. Office 1 has internal network of: 192.168.0.0 255.255.240.0 Office 2 has internal network of: 192.168.16.0 255.255.255.0 And the configuration files are: Server.conf port 1194 --script-security 2 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" # TCP or UDP server? ;proto tcp proto udp dev tap0 ;dev tun ca ca.crt cert openvpn.crt key openvpn.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.0.59 255.255.240.0 192.168.6.72 192.168.6.75 push "route 192.168.0.0 255.255.240.0" push "dhcp-option DNS 192.168.0.2" push "dhcp-option DOMAIN testeers.local" keepalive 10 120 tls-auth ta.key 0 # This file is secret comp-lzo user nobody group nogroup persist-key persist-tun log /var/log/openvpn/openvpn.log status /var/log/openvpn-status.log verb 3 Client Config file client dev tap ;dev tun --script-security 2 ;proto tcp proto udp remote 1xx.2xx.xxx.124 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert admin-VAIO.crt key admin-VAIO.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 Ifconfig on the server now shows the following: br0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 inet addr:192.168.0.59 Bcast:192.168.15.255 Mask:255.255.240.0 inet6 addr: fe80::250:56ff:fe8b:1a49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1081860 errors:0 dropped:1358 overruns:0 frame:0 TX packets:242385 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76600615 (76.6 MB) TX bytes:64474575 (64.4 MB) eth0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:1144125 errors:0 dropped:7172 overruns:0 frame:0 TX packets:252486 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:109893729 (109.8 MB) TX bytes:66372620 (66.3 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:67865 errors:0 dropped:0 overruns:0 frame:0 TX packets:67865 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5183276 (5.1 MB) TX bytes:5183276 (5.1 MB) tap0 Link encap:Ethernet HWaddr 32:4f:42:11:b7:c5 inet6 addr: fe80::304f:42ff:fe11:b7c5/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3329 errors:0 dropped:0 overruns:0 frame:0 TX packets:215472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:373205 (373.2 KB) TX bytes:17465832 (17.4 MB)

  Read the article

• Windows powering off after "preparing your desktop" stage.

  - by Jack

  Windows 7 64 bit. The only recent change was I installed two updates for MS Office, and a cumulative security update for IE. As soon as I choose a user and login, after loading my user profile it states the preparing your desktop message, and then powers off. I have used DaRT to check the event log, but nothing is recorded. Ideas?

  Read the article

• IIS EventLog Errors

  - by chris

  I keep getting this error in my event viewer on IIS 6. I'm trying to figure out if my error resets my connection (maybe recycles the worker processes?). The error is: An attempt was made to load filter 'C:\Program Files\Software Artisans\FileUp \FileUpIsapi.dll' but it requires the SF_NOTIFY_READ_RAW_DATA filter notification and this notification is not supported in Worker Process Isolation Mode. For more information, see Help and Support Center at http://go.microsoft.com/fwlink /events.asp.

  Read the article

• What is the current state of Ubuntu's transition from init scripts to Upstart? [migrated]

  - by Adam Eberlin

  What is the current state of Ubuntu's transition from init.d scripts to upstart? I was curious, so I compared the contents of /etc/init.d/ to /etc/init/ on one of our development machines, which is running Ubuntu 12.04 LTS Server. # /etc/init.d/ # /etc/init/ acpid acpid.conf apache2 --------------------------- apparmor --------------------------- apport apport.conf atd atd.conf bind9 --------------------------- bootlogd --------------------------- cgroup-lite cgroup-lite.conf --------------------------- console.conf console-setup console-setup.conf --------------------------- container-detect.conf --------------------------- control-alt-delete.conf cron cron.conf dbus dbus.conf dmesg dmesg.conf dns-clean --------------------------- friendly-recovery --------------------------- --------------------------- failsafe.conf --------------------------- flush-early-job-log.conf --------------------------- friendly-recovery.conf grub-common --------------------------- halt --------------------------- hostname hostname.conf hwclock hwclock.conf hwclock-save hwclock-save.conf irqbalance irqbalance.conf killprocs --------------------------- lxc lxc.conf lxc-net lxc-net.conf module-init-tools module-init-tools.conf --------------------------- mountall.conf --------------------------- mountall-net.conf --------------------------- mountall-reboot.conf --------------------------- mountall-shell.conf --------------------------- mounted-debugfs.conf --------------------------- mounted-dev.conf --------------------------- mounted-proc.conf --------------------------- mounted-run.conf --------------------------- mounted-tmp.conf --------------------------- mounted-var.conf networking networking.conf network-interface network-interface.conf network-interface-container network-interface-container.conf network-interface-security network-interface-security.conf newrelic-sysmond --------------------------- ondemand --------------------------- plymouth plymouth.conf plymouth-log plymouth-log.conf plymouth-splash plymouth-splash.conf plymouth-stop plymouth-stop.conf plymouth-upstart-bridge plymouth-upstart-bridge.conf postgresql --------------------------- pppd-dns --------------------------- procps procps.conf rc rc.conf rc.local --------------------------- rcS rcS.conf --------------------------- rc-sysinit.conf reboot --------------------------- resolvconf resolvconf.conf rsync --------------------------- rsyslog rsyslog.conf screen-cleanup screen-cleanup.conf sendsigs --------------------------- setvtrgb setvtrgb.conf --------------------------- shutdown.conf single --------------------------- skeleton --------------------------- ssh ssh.conf stop-bootlogd --------------------------- stop-bootlogd-single --------------------------- sudo --------------------------- --------------------------- tty1.conf --------------------------- tty2.conf --------------------------- tty3.conf --------------------------- tty4.conf --------------------------- tty5.conf --------------------------- tty6.conf udev udev.conf udev-fallback-graphics udev-fallback-graphics.conf udev-finish udev-finish.conf udevmonitor udevmonitor.conf udevtrigger udevtrigger.conf ufw ufw.conf umountfs --------------------------- umountnfs.sh --------------------------- umountroot --------------------------- --------------------------- upstart-socket-bridge.conf --------------------------- upstart-udev-bridge.conf urandom --------------------------- --------------------------- ureadahead.conf --------------------------- ureadahead-other.conf --------------------------- wait-for-state.conf whoopsie whoopsie.conf To be honest, I'm not entirely sure if I'm interpreting the division of responsibilities properly, as I didn't expect to see any overlap (of what framework handles which services). So I was quite surprised to learn that there was a significant amount of overlap in service references, in addition to being unable to discern which of the two was intended to be the primary service framework. Why does there seem to be a fair amount of redundancy in individual service handling between init.d and upstart? Is something else at play here that I'm missing? What is preventing upstart from completely taking over for init.d? Is there some functionality that certain daemons require which upstart does not yet have, which are preventing some services from converting? Or is it something else entirely?

  Read the article

• Letters seem to be rendered incorrectly in Firefox

  - by BloodPhilia

  So, when I'm browsing in firefox, some letters look grainy or glowing, does anyone know what might be causing this? It doesn't show on all websites, only some. It almost looks like Firefox is trying to render different font colours on top of each other and blends them in the process somehow. Using Firefox 3.6.13 on Windows 7 Ultimate 64 bits and the problems also arrise when running Firefox in safe mode. http://facelift.mawhorter.net/ (top menu) IE 8: FF 3: https://student.ru.nl/portal/dt (center notification) IE 8: FF 3:

  Read the article

• Do I need to update my Linux servers older Java to Java JRE 5 Update 22?

  - by newbie

  I have web application running in jboss 4.0.2 and it has older java 5 version, is this new update causing possible security flaws in my web application server?

  Read the article

• What are the ideal settings for a Belkin WiFi Router to connect to an iPhone? [closed]

  - by user34833

  The Belkin Router (F5D8235-4 v2000) has numerous options in the setup. These are the current settings: Wireless On SSID Buster's Special Security Type WPA Encryption Type TKIP WLAN MAC Address 00:22:75:B3:58:38 WPS Enabled Guest Access Disabled SSID Belkin_N+_Guest Password/PSK NotThatSillyYet :) The iPhone is a 3g with 16GB it has no problems connecting to public networks like libraries or restaurants. But currently it won't connect to my home WiFi. Thanks for your time and help. Paul

  Read the article

• Change owner recursively with Powershell?

  - by Mikael Grönfelt

  I'm trying to use Powershell to change owner of a folder, recursively. I'm basically using this code: $acct1 = New-Object System.Security.Principal.NTAccount('DOMAIN\Enterprise Admins') $profilefolder = Get-Item MyFolder $acl1 = $profilefolder.GetAccessControl() $acl1.SetOwner($acct1) set-acl -aclobject $acl1 -path MyFolder This will change ownership at the first level, but not for any subfolders or files. Is there a way to extend the scope to all content of MyFolder?

  Read the article

• What's the advantage of OpenVPN over SSTP?

  - by Jose

  If considering Windows only environment, what's the advantage of introducing OpenVPN as the company VPN service, instead of Windows built-in protocols? Especially the new SSTP protocol already overcome the one of the weakness of PPTP, which may not go over firewall/NAT. I'm wondering is there any reason not to use Windows integrated solution. The strength of the security can be an issue but I'm not sure how different they are (I know MS VPN was vulnerable but is it still?) Thanks.

  Read the article

• Assign fixed IP address via DHCP by DNS lookup

  - by Janoszen

  Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

  Read the article

• Weird IIS with Windows Authentication + IE problem

  - by Paulius Maruška

  I have a website running on IIS and using Windows Authentication. All users that are configured to get access to the site are form a AD domain (not local users). In the properties of a Website, I have set to use the AD domain as the realm. Now, when using Firefox, Safari or Chrome - Everything is fine. When the user tries to open the site, he get's the login box. he enters simply "username" and "password" (let's pretend that it's an actual login and password :P) and he get's into the site. When using IE, however, things get nasty. When the user tries to open the site - he get's the login box. User enters the "username" and "password" again, but those get rejected! And when the second time login box pops up - it has the username filled in as "web-server-domain-name\username" which is wrong, because web-server-domain-name is not the domain where all users reside (it's "ad-domain"). I've spent days trying to figure out what's going on... Note, that if I manually enter "ad-domain\username" - I get accepted into the site without problems. So, my guess is that IE sends wrong username if domain is not specified. Anyway, IE is the only browser that triggers this behavior! Is it possible to do a server-side fix? Maybe it's possible to somehow auto-map the users to AD users? If it's not solvable server-side - is there a client-side fix for this? Thank you. PS: I'm more of a programmer than a sys-admin, so configuring servers isn't the strong side of mine... :P UPDATE: @Evan: Yes, "Digest authentication for Windows domain servers" is also enabled. @Eric: IIS version is 6.0. The authentication methods enabled are: Integrated and digest - all other methods are disabled. As for the security log. I looked at it, when doing "username" and "password" login in Chrome/Firefox and when doing "ad-domain\username" and "password" login from IE - the generated log messages are the same (I see no difference, anyway). When entering "username" and "password" I don't see any errors in the security (or any other) log, so can't tell what method it's trying to use. UPDATE 2: As suggested by Eric in the comments - I played around with Fiddler... While playing with it, I noticed, that when "username" and "password" is entered in FF and IE - the "Authorization" header value (encrypted) sent by IE is longer (almost two times) than one sent by FF. I tried to disable Windows Integrated authentication and only leave the Digest enabled - that fixed the problem (meaning, IE used the right realm just like other browsers), but that caused bazillion other problems with my site, because with Digest - user impersonation on the server doesn't work (that causes problems, when connecting to database etc). Any ideas?

  Read the article

• New web page and edited localhost/index.html gives a 404 error

  - by dave

  Hello, I am using Ubuntu and have AMP. I tried to create a new folder under /var/www/html/ it says not found. I edited the http://localhost/index.html and that gives me a 404 error. I guess its something to do with the security. localhost/index.html was OK before the edit Appreciate all assistance. Thanks Dave

  Read the article

• New web page and edited localhost/index.html gives a 404 error

  - by Jean

  Hello, I am using Ubuntu and have AMP. I tried to create a new folder under /var/www/html/ it says not found. I edited the http://localhost/index.html and that gives me a 404 error. I guess its something to do with the security. localhost/index.html was OK before the edit Appreciate all assistance. Thanks Jean

  Read the article

• remote linux support service

  - by James

  Hi after struggling with a wireless adapter installation for a few days, I am wondering if there is some service that will do it remotely. I am not talking about an enterprise type remote support center. I am thinking about a similar service for home PCs anyone aware of such a service ?

  Read the article

• SCCM SP2 - OOB Management Certificates Problems

  - by Achinoam

  I have a vPro client computer with AMT 4.0. It was importeed successfully via the Import OOB Computers wizard, and after sending a "Hello- packet" it became provisioned. (The SCCM GUI displays AMT Status: Provisioned). But when I try to perform power operations on this machine, they always fail with the following lines in the log: AMT Operation Worker: Wakes up to process instruction files 7/29/2009 10:59:29 AM 2176 (0x0880) AMT Operation Worker: Wait 20 seconds... 7/29/2009 10:59:29 AM 2176 (0x0880) Auto-worker Thread Pool: Work thread 3884 started 7/29/2009 10:59:29 AM 3884 (0x0F2C) session params : https:/ / amt4.domaindemo.com:16993 , 11001 7/29/2009 10:59:29 AM 3884 (0x0F2C) ERROR: Invoke(invoke) failed: 80020009argNum = 0 7/29/2009 10:59:31 AM 3884 (0x0F2C) Description: A security error occurred 7/29/2009 10:59:31 AM 3884 (0x0F2C) Error: Failed to Invoke CIM_BootConfigSetting::ChangeBootOrder_INPUT action. 7/29/2009 10:59:31 AM 3884 (0x0F2C) AMT Operation Worker: AMT machine amt4.domaindemo.com can't be waken up. Error code: 0x80072F8F 7/29/2009 10:59:31 AM 3884 (0x0F2C) Auto-worker Thread Pool: Warning, Failed to run task this time. Will retry(1) it 7/29/2009 10:59:31 AM 3884 (0x0F2C) After investigation, I've seen that the problem occurs already on the 2nd stage of the provisioning: Start 2nd stage provision on AMT device amt4.domaindemo.com. 8/2/2009 4:55:12 PM 2944 (0x0B80) session params : https: / / amt4.domaindemo.com:16993 , 11001 8/2/2009 4:55:12 PM 2944 (0x0B80) Delete existing ACLs... 8/2/2009 4:55:12 PM 2944 (0x0B80) ERROR: Invoke(invoke) failed: 80020009argNum = 0 8/2/2009 4:55:14 PM 2944 (0x0B80) Description: A security error occurred 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Cannot Enumerate User Acl Entries. 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: CSMSAMTProvTask::StartProvision Fail to call AMTWSManUtilities::DeleteACLs 8/2/2009 4:55:14 PM 2944 (0x0B80) Error: Can not finish WSMAN call with target device. 1. Check if there is a winhttp proxy to block connection. 2. Service point is trying to establish connection with wireless IP address of AMT firmware but wireless management has NOT enabled yet. AMT firmware doesn't support provision through wireless connection. 3. For greater than 3.x AMT, there is a known issue in AMT firmware that WSMAN will fail with FQDN longer than 44 bytes. (MachineId = 17) 8/2/2009 4:55:14 PM 2944 (0x0B80) STATMSG: ID=7208 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AMT_OPERATION_MANAGER" SYS=JE-DEV-MS0 SITE=JR1 PID=1756 TID=2944 GMTDATE=Sun Aug 02 14:55:14.281 2009 ISTR0="amt4.domaindemo.com" ISTR1="amt4.domaindemo.com" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 8/2/2009 4:55:14 PM 2944 (0x0B80) This error is consistent with all the other 2nd stage provisioning tasks. (Add ACLs, Enable Web UI, etc.) I've opened the certification authority, and I see that the certificates were issued to the SCCM Site server instead of the AMT client! What could be the reason for this failure? What is the problematic definition for the certificate? Thank you in advance!!!

  Read the article

• Can FireFox be Installed with a Fixed Set of Extensions that cannot be Changed by End-Users?

  - by riba

  There is a way to bundle FireFox with a fixed list of extensions and that users won't be able to install/uninstall them after ? A big company with lots of IE6 search a way to do that, they'are afraid about extensions and security if users can install anything.

  Read the article

• Can FireFox be Installed with a Fixed Set of Extensions that cannot be Changed by End-Users?

  - by riba

  There is a way to bundle FireFox with a fixed list of extensions and that users won't be able to install/uninstall them after ? A big company with lots of IE6 search a way to do that, they'are afraid about extensions and security if users can install anything.

  Read the article

• windows-2003 server SCSI driver problem

  - by Vicky

  I have a problem in Adaptec 160m SCSI card connected to DELL Power Edge server, that it is often stops communicating. In windows system error I am able to see an error pointing to the SCSI driver continuously. The error says: The driver detected a controller error on \Device\Scsi\adpu160m4. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Can anyone suggest me what to do to solve it?

  Read the article

• Getting an boot error when starting computer

  - by Rob Avery IV

  I was in the middle of watching a movie on Netflix, then suddenly everything started crashing. First, explorer.exe closed down, then Google chrome. I had multiple things running in the background (Steam, Raptr, etc.). Individuality, each of those apps closed down also. When they did, a small dialog box popped up for each of them, one at a time, saying that it was missing a file, it couldn't run anymore, or something similar to that. It also had some jumbled up "code" with numbers and letters that I couldn't read. Ever since then, everytime I turn my computer on, it will run for a few seconds and give this error "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". No matter how many times I try to reboot it, it always gives me the same error. A day later after this happened I was able to start the computer, but before it booted, it told me that I didn't shut down the computer properly and asked how I wanted to run the OS (Run Windows in Safety Mode, Run Windows Normally, etc.). Once I logged, everything went SUPER slow and everything crashed almost instantly. The only thing I opened was Microsoft Security Essentials and only got in about two clicks before it was "Not Responding". Then, after that the whole computer froze and I had to restart it. Now, it's back to saying what it originally said, "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". I built this PC back in February 2012. Here are the specs: OS: Windows 7 Ultimate CPU: AMD 8-core GPU: Nvidia GTX Force 560 Ti RAM: 16GB Hard Drive: Hitachi Deskstar 750GB I'm usually very good taking care of my PC. I don't download anything that's not from a trusted site or source. I don't open up any spam email or such or go to any harmful websites like porn or stream movies. I am very clean with the things I do with my PC and don't do many DIFFERENT things with it. I use it pretty often especially for video games and doing homework in Eclipse. Also, good to note that I don't have any Norton or antisoftware installed. I have Microsoft Security Essentials installed but never did a scan. Thanks!

  Read the article

• How is the filesystem of Wikipedia designed?

  - by Heo

  I read about FHS, and I started to consider the file system of wikipedia. On the one hand, I feel it is a security risk to let everyone know it. On the other hand, it is necessary for developers. For example, is there some rule to know where are all sitemaps and their indices located? So: How is the file system of Wikipedia designed?

  Read the article

• Use-cases for assigning multiple IP addresses to 1 NIC

  - by Harry

  What would be some of major use-cases in which you would want to assign multiple IP addresses to your NIC? Knowing of any standard/well-known 'gotchas' associated with each use-case would also be helpful. For example, I heard someone saying that a user with access to such a machine will automatically get access to both networks, which could be a security issue. You can assume a Linux-based environment.

  Read the article

• ssh connectivity issue

  - by achal tomar

  I have a CentOS 5.5 server hosted in a remote data center. I usually access this server from a Red Hat Enterprise Linux 5 server using the ssh command. Now my organization has implemented a proxy server, this is not allowing me to connect to the VPS server. I see the following error using the command root@<ip address>:-: ssh: connect to host <ip address> PORT 22: connection refused. Can anybody help me with this issue?

  Read the article

• Is there anything wrong with disabling Teredo?

  - by Wayne Hartman

  Today while doing some routine maintenance I discovered that my internet-connected network adapter was using a 6to4 tunnel to connect to my ISP. Some self-eduction on Teredo seemed to indicate quite a few potential security vulnerabilities with using the protocol. I have disabled my network adapter from using Teredo and it doesn't seem to impact my gateway in any way. Is there anything I am missing that should encourage me to turn it back on?

  Read the article

• How to access "Manage wireless networks" in acer netbook (windows 7)

  - by George Kas

  I have windows 7 prof on a aspire acer one netbook. I want to access the "Manage wireless networks" panel from Control Panel - Network and Internet - Network and Sharing Center - Manage wireless networks (on the left bar) I click it, but it just won't open!

  Read the article

• install Adobe® Acrobat 9 Pro error

  - by Tim

  My OS is Windows 7. I try to download Adobe® Acrobat 9 Pro for English and Windows (326.6MB) by its Akamai Download Manager and then click on "Install Now". But I meet some error: "Action center.lnk" is a file which was downloaded from the internet. Are you sure you want to open it? I click yes, but then: Launching File Failed: se_err_accessdenied Anyone has some idea why and how to fix it? Thanks and regards!

  Read the article

< Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >