Search Results

Search found 1868 results on 75 pages for 'board'.

Page 38/75 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

  • writing to an ioport resulting in segfaults...

    - by Sniperchild
    I'm writing for an atmel at91sam9260 arm 9 cored single board computer [glomation gesbc9260] Using request_mem_region(0xFFFFFC00,0x100,"name"); //port range runs from fc00 to fcff that works fine and shows up in /proc/iomem then i try to write to the last bit of the port at fc20 with writel(0x1, 0xFFFFFC20); and i segfault...specifically "unable to handle kernel paging request at virtual address fffffc20. I'm of the mind that i'm not allocating the right memory space... any helpful insight would be great...

    Read the article

  • What design pattern should be used to create an emulator?

    - by Facon
    I have programmed an emulator, but I have some doubts about how to organizate it properly, because, I see that it has some problems about classes connection (CPU <- Machine Board). For example: I/O ports, interruptions, communication between two or more CPU, etc. I need for the emulator to has the best performance and good understanding of the code. PD: Sorry for my bad English.

    Read the article

  • Rails 3: How do I call a javascript function from a js.erb file

    - by user321775
    Now that I've upgraded to Rails 3, I'm trying to figure out the proper way to separate and reuse pieces of javascript. Here's the scenario I'm dealing with: I have a page with two areas: one with elements that should be draggable, the other with droppables. When the page loads I use jQuery to setup the draggables and droppables. Currently I have the script in the head portion of application.html.erb, which I'm sure is not the right solution but at least works. When I press a button on the page, an ajax call is made to my controller that replaces the draggables with a new set of elements that should also be draggable. I have a js.erb file that renders a partial in the correct location. After rendering I need to make the new elements draggable, so I'd like to reuse the code that currently lives in application.html.erb, but I haven't found the right way to do it. I can only make the new elements draggable by pasting the code directly into my js.erb file (yuck). What I'd like to have: - a javascript file that contains the functions prepdraggables() and prepdroppables() - a way to call either function from application.html.erb or from a js.erb file I've tried using :content_for to store and reuse the code, but can't seem to get it working correctly. What I currently have in the head section of application.html.erb <% content_for :drag_drop_prep do %> <script type="text/javascript" charset="utf-8"> $(document).ready(function () { // declare all DOM elements with class draggable to be draggable $( ".draggable" ).draggable( { revert : 'invalid' }); // declare all DOM elements with class legal to be droppable $(".legal").droppable({ hoverClass : 'legal_hover', drop : function(event, ui) { var c = new Object(); c['die'] = ui.draggable.attr("id"); c['cell'] = $(this).attr("id"); c['authenticity_token'] = encodeURIComponent(window._token); $.ajax({ type: "POST", url: "/placeDie", data: c, timeout: 5000 }); }}); }); </script> <% end %> undo.js.erb $("#board").html("<%= escape_javascript(render :partial => 'shared/board', :locals => { :playable => true, :restartable => !session[:challenge]}) %>") // This is where I want to prepare draggables. <%= javascript_include_tag "customdragdrop.js" %> // assuming this file had the draggables code from above in a prepdraggables() function prepdraggables();

    Read the article

  • 2d java Graphics

    - by LukeG
    I am new to java 2d graphics and I have problem handling mouseclick event. Is it possible for you to tell me why there is nothing going on after updating mouse status to clicked ? What I want to do is to change the image in array at 0 2 to another image. Nothing happens tho. Thanks for your help in advance. import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Image; import java.awt.event.*; import java.awt.*; import javax.swing.ImageIcon; import javax.swing.*; public class Board extends JPanel implements MouseListener { private static boolean[] keyboardState = new boolean[525]; private static boolean[] mouseState = new boolean[3]; private static Image[][] images; Image house; int w = 0; int h = 0; int xPos; int yPos; ImageIcon ii = new ImageIcon(this.getClass().getResource("house.gif")); ImageIcon iii = new ImageIcon(this.getClass().getResource("house1.gif")); public Board() { house = ii.getImage(); h = house.getHeight(null); w = house.getWidth(null); images = new Image[10][10]; for(int i = 0; i < 10; i++) { for(int j = 0; j < 10; j++) { images[i][j] = house; } } } public void paint(Graphics g) { Graphics2D g2d = (Graphics2D) g; for(int i = 0; i < 10; i++) { for(int j = 0; j < 10; j++) { g2d.drawImage(images[i][j],w*i,h*j,null); } } //g2d.drawImage(house,15,15,null); } public void checkMouse() { if(mouseState[0]) { images[0][2] = iii.getImage(); repaint(); super.repaint(); } } @Override public void mousePressed(MouseEvent e) { mouseKeyStatus(e, true); checkMouse(); } @Override public void mouseReleased(MouseEvent e) { mouseKeyStatus(e, false); repaint(); } public static boolean mouseButtonState(int button) { return mouseState[button - 1]; } private void mouseKeyStatus(MouseEvent e, boolean status) { if(e.getButton() == MouseEvent.BUTTON1) mouseState[0] = status; else if(e.getButton() == MouseEvent.BUTTON2) mouseState[1] = status; else if(e.getButton() == MouseEvent.BUTTON3) mouseState[2] = status; }

    Read the article

  • jquery ui drag and drop + ajax problem

    - by mobster
    I'm making board game and i'm using jquery ui draggable effect for figures. On drag start I send ajax request to other page where I generate droppable places soo the figure can be drag and droped only on those particular places, but the problem is I must move figure twice to take effect. Does anyone know how to solve this problem? I would be very grateful for help.

    Read the article

  • join same rails models twice, eg people has_many clubs through membership AND people has_many clubs through committee

    - by Ben
    Models: * Person * Club Relationships * Membership * Committee People should be able to join a club (Membership) People should be able to be on the board of a club (Committee) For my application these involve vastly different features, so I would prefer not to use a flag to set (is_board_member) or similar. I find myself wanting to write: People has_many :clubs :through = :membership # :as = :member? :foreign_key = :member_id? has_many :clubs :through = :committee # as (above) but I'm not really sure how to stitch this together

    Read the article

  • Best Embedded SQL DB for write performance?

    - by max.minimus
    Has anybody done any benchmarking/evaluation of the popular open-source embedded SQL DBs for performance, particularly write performance? I've some 1:1 comparisons for sqlite, Firebird Embedded, Derby and HSQLDB (others I am missing?) but no across the board comparisons... Also, I'd be interested in the overall developer experience for any of these (for a Java app).

    Read the article

  • My horizontal drop down with CSS, sub navigation menu items are being displayed on top of each other

    - by Rigo Collazo
    my sub navigation menu items are being displayed on top of each other here is the code: /* NAVIGATION */ .nav-bar {width: 100%; height: 80px; background-image:url(../images/bg-menu80.jpg);} .nav-hold {overflow: hidden;} .nav-list {float: right;} .nav-list li {float: left; width: auto; position: relative;} .nav-list li a {text-decoration: none; display:block; padding: 30px 7px 20px 7px; color: #f9f9f9; font-size: .9em; font-weight: bold;} .nav-list li ul {display: none;} .nav-list li a:hover {text-decoration: none; display: block; padding: 30px 7px 20px 7px; color: #000; font-size: .9em; font-weight: bold; background-color: #e7e4e4;} .nav-list li a:hover li{display: block; position: absolute; margin: 0; padding: 0;} .nav-list li a:hover li{float: left;} .nav-list li:hover li a{ background-color: #333; border-bottom: 1px solid #fff; color: #FFF;} <ul class="nav-list" id="navigation"><!--Menu list--> <li><a href="index.html">Home</a></li> <li><a href="about.html">About Us</a></li> <li> <ul><a href="members.html">Members</a> <li><a href="board.html">Board of Directors</a></li> <li><a href="committee.html">Committee</a></li> </ul></li> <li><a href="join.html">Join Us</a></li> <li><a href="events.html">Events</a></li> <li><a href="rules.html">Rules &amp; Guidelines</a></li> <li><a href="archive.html">Archive</a></li> <li><a href="contact.html">Contact Us</a></li> <li><a href="#">Login</a></li> </ul><!--ENDS Menu list-->

    Read the article

  • Why right click is not working on java application?

    - by Nitz
    Hello Guys, I had made one Java Swing based application. On my application,if i click anywhere on the JFrame or anything, then my right click is not working? i had not set anything like that..then why is not working? Basically my key board was not working then i try to copy - paste data using mouse then, i came about to know that...my right click is not working on any area of my application...

    Read the article

  • SQL Join only returning 1 row.

    - by kevin
    Not quite sure what I'm missing, but my SQL statement is only returning one row. SELECT tl.*, (tl.topic_total_rating/tl.topic_rates) as topic_rating, COUNT(pl.post_id) - 1 as reply_count, MIN(pl.post_time) AS topic_time, MAX(pl.post_time) AS topic_bump FROM topic_list tl JOIN post_list pl ON tl.topic_id=pl.post_parent WHERE tl.topic_board_link = %i AND topic_hidden != 1 ORDER BY %s I have two tables (post_list and topic_list), and post_list's post_parent links to a topic_list's topic_id. Instead of returning all the topics (where their board's topic_board_link is n), it only returns one topic.

    Read the article

  • launching keyboard of languages other than english

    - by iSight
    hi, i have build a Mac OS X sample application which can open on screen keyboard using NSWorkSpace methods which is in english keys only. But, when i set the localization to other language to japanese(say) then what should i do to launch the on screen key board with keys appearing in japanese language.

    Read the article

  • CodeIgniter - numbers in sql query are masked with ``

    - by Checkson
    Hello, i'm using CodeIgniter for developing a community board. As I'm using nested sets to get a nested forum hierarchy, I have to run a lot of queries such as: SELECT `id` FROM `forums` WHERE 1 BETWEEN `lft` AND `rgt` My problem: CodeIgniter is replacing the "1" by "`1`" because the "1" is recognized as a column name. Of course, the query does not work any more. Is there a way to get it working? thx in advance

    Read the article

  • Java for-loop problem

    - by Dan
    OK so here's my code: http://so.pastebin.com/9swaiuRy The problem is that I am trying to make certain tiles blocked so the player cannot walk on them. However, it's only reading the FIRST tile which is board[0][0] and everything else is not checked.... What am I doing wrong? :( Thank you.

    Read the article

  • Install Intel USB 3.0 eXtensible Host Controller Driver for Windows Server 2008 R2 x64

    - by ffrugone
    According to Intel and Dell, by board is technically a 'desktop' board and they therefore do not support Intel USB 3.0 eXtensible Host Controller drivers for Windows Server 2008 (R2 x64). I'm trying to find a workaround. I found an entry on someone who tried to tackle this, but I can't make his fix work for me. Below, I have copied both his entry, and my reply. I'm a loyal stackoverflow user, and hopefully the people here at serverfault can help me: anyforumuser Re: GA-Z77X-UD5H USB3 Drivers not installing? « Reply #6 on: July 05, 2012, 04:12:59 am » Thanks to JoeMiner , his process for the network drivers gave me the clues to figure out to get the USB3 drivers working. I have got the intel USB3 drivers working at full speed in win server 2008r2 you have to edit the following file : 1. mup.xml in change the "Windows7" to "W2K8" 2. in setup.if2 under [groups] line starting with "HSCSDRIVER " change the "IsOS( ... )" entry to "IsOS(WIN2008_R2,WIN2008_R2_MAXSP)" inf files for all copy the content of the [Intel.NTAMD64.6.1] group to the [Intel.NTAMD64.6.2] group driver folders. here i am not entirely sure which is correct so there are some double up's. in the drivers folder copy the "Win7" folder to "win2008" , "win2008_r2" and "x64" ie your drivers folder should now contain the "win2008" , "win2008_r2" and "x64" folders and they contain contents of the win7 folder (the inf files should of already been fixed) Run install , It should install properly and work now. You will have to reboot If it doesn't work remove the intel usb3 controllers from device manager and get it to "scan for hardware changes" Good luck !!! benevida Re: GA-Z77X-UD5H Intel Network Drivers not installing? « Reply #7 on: August 13, 2012, 02:21:14 pm » Thank you anyforumuser! A process for getting this driver installed was exactly what I needed. However, I've hit a snag. I believe I've followed every step exactly as written, but I'm getting an error during installation. I get the message "One or more files that are required for installation are either missing or corrupted. Setup will exit." Behind the error, the 'Setup Progress' shows the current step as "Copying File: C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Drivers\iusb3xhc.man". I've checked the installation files, and iusb3xhc.man seems to be a viable file in all of the Windows 2008 sub-directories of the Drivers folder. Therefore I don't see how the file could be missing and I doubt that it is corrupted, (although it does NOT exist in the \Drivers\HCSwitch folder). I opened 'Setup.if2', and there are two aspects to the step of copying iusb3xhc.man that caught my eye. First, the steps immediately preceding are set to 'error=ignore'. If they hadn't completed successfully, this is the first step where we'd hear about it. Second, this is the first step where the relative path '%source%\drivers\%_os%\%_ia%\' is used. If I haven't named the Windows 2008 sub-directories correctly, I could see where things are fouling up. In any event, if someone could take a look and make suggestions I'd appreciate it. Thank you.

    Read the article

  • Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

    - by Ray
    Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

    Read the article

  • Windows XP Video Configuration Issues

    - by Matt
    Recently I had my motherboard burn out on me. Needing the machine for work, I purchased a different motherboard and installed that. Generally a reinstall of windows is good at that point but I am not in a position to do that so I just decided I would live with it for now. When I can log-in, everything works fine, what doesn't is getting to the log-in prompt to begin with. Basically when I first installed the new mobo, every time I rebooted the machine, I would not get the windows login prompt. One of the monitors would receive a signal but the screen would be black. Moving the mouse would not show the cursor and hitting the up arrow key and typing my password and hitting enter (which will normally log you in without mouse) wouldn't change anything. I would then change the monitor configuration around (2 lcd's and a crt) and reboot and at least one of the monitors would work and display the login prompt. I could then go into display properties and turn on the other monitors. However if I rebooted again, I would get the black screen on one monitor again. I would then have to change the configuration again to one not used before and I could re-do the manual setup at that point. I think windows saves the configurations so I had to keep giving it new ones. Needless to say I've been trying to not turn off my machine. Early this week I actually got the prompt to come up without playing musical monitors. Thinking everything was getting better, I found no harm in rebooting to install the latest windows updates. Boy was I wrong. Now no matter what I do I can't get a windows log-in prompt to display. I've tried almost every conceivable combination. The new mobo has onboard video so I set that in the bios (yea bios screen always displays fine, its not until windows boots that there is a problem) to be the primary video. Still no luck. I have two other graphics cards in the machine which I'm using. Tried all kinds of configurations between those and on-board but still get this black screen of death. I read somewhere that deleting the video drivers would reset the configurations. I logged into safe mode (which works on one monitor), and uninstalled the display drivers. Still no luck and when I booted back into safe mode, it wanted to install new hardware and the display adapters weren't there as expected. Anyone have any ideas? A fresh install would be a pain and I might be getting my old board back from RMA soon so not sure I want to go through with that just yet. Only thing I can think of is to continue to try other combinations like physically removing the graphics cards. They are both EVGA 8600 cards and the windows boot screen does display fwiw.

    Read the article

  • Intermittent lockups, unable to diagnose in over a year

    - by Magsol
    Here's a real doosie; I may just give my firstborn child to whomever helps me solve this problem. In July 2008, I assembled what would be my desktop computer for graduate school. Here are the specs of the machine I built: Thermaltake 750W PSU Corsair Dominator 2x2GB 240-pin SDRAM Thermaltake Tower Asus P5K Deluxe Motherboard Intel Core 2 Quad Q9300 2.5GHz CPU 2 x GeForce 8600 GT WD Caviar Blue 640GB hard drive CD burner DVD burner Soon thereafter, I ordered a new motherboard (because I was an idiot; that first motherboard supported CrossFire, not SLI), an Asus P5N-D. I was originally running Windows XP SP3. Pretty much right into the start of the fall semester, my desktop would simply lock up after awhile. If my system was largely idling, it would be after 1-3 days. If was gaming, it often happened an hour or two into my gaming session, indicating a link to activity level. Here's where it started getting interesting. I started looking at the system temps. The CPU was warmer than it should have been (~60s C), so I purchased some more efficient cooling compound a way better cooler for it. Now it hardly goes over 40 C. Intel was even kind enough to swap it out for free, just to rule it out. Lockups continued. The graphics cards were also running pretty warm: about 60 C idling. Removing one of them seemed to improve stability a little bit...as in, it wouldn't lock up quite as frequently, but still always eventually locked up. But it didn't matter which card I used or removed, the lockups continued. I reverted back to the original motherboard, the P5K Deluxe. Lockups continued. I purchased an entirely new motherboard, eVGA's nForce 750i. Lockups continued. Ran memtest86+ over and over and over, with no errors. Even RMA'd the memory. Lockups continued. Replaced the PSU with a Corsair 750W PSU. Lockups continued. Tried disconnecting all IDE drives (HDDs are SATA). Lockups continued. Replaced both graphics cards with a single Radeon HD 4980. Average temps are now always around 50 C when idling, 60 C only when gaming. Lockups continued. Throughout the whole ordeal, the system has been upgraded from Windows XP SP3 to Vista 32-bit, to Vista 64-bit, and is now at Windows 7 64-bit. Lockups have occurred at every step along the way (each OS was in place for at least a few months before the next upgrade). Edit: By "upgrade" I mean clean install each time. In addition to those reformats, I have performed many, many other reformats of the system and a reinstall of whatever OS had been previously installed in an attempt to rectify this problem, to no avail./Edit When the system locks up, there's no blue screen, no reboot, no error message of any kind. It simply freezes in place until I hit the reset button. Very, very rarely, once Windows boots back up, the system informs me that Windows has recovered from an error, but it can never find the source aside from some piece of hardware. I've swapped out every component in this computer, and there are more fans in it than I care to count...though for the sake of completeness: top 80mm case fan (out) rear 80mm case fan (out) rear 120mm case fan (out) front 120mm case fan (in) side 250mm case fan (in) giant CPU fan on-board motherboard fan (the eVGA board) triple-fan memory setup (came with the memory) PSU internal fan another 120mm fan I stuck on the underside of the video card to keep hot air from collecting at the bottom of the case I'm truly out of ideas. ANY help at all would be oh-so-very GREATLY appreciated. Thank you!

    Read the article

  • Monitor randomly shutting down, computer accepting no input, need to restart to get working

    - by Sebastian Lamerichs
    First off, spec list: OS: Windows 7 Ultimate 64-bit SP1 CPU: i7-4820k @ 3.7GHz (stock) GPU: Two 3GB Radeon HD 7970s @ 1.05GHz Mobo: AsRock X79 Extreme6 HDD: 2TB Seagate Barracuda 7200rpm RAM: 16GB quad-channel Kingston 1600MHz PSU: Antec HCG 900W Monitors: Acer S220HQL 1920x1080 + ViewSonic VA2251 1920x1080. Plugged into different GPUs. My problem is that, on a daily-ish basis, my monitors will turn off and not turn back on. My computer will still be running, GPU/CPU/case fans all still going, but the monitors will not turn back on. Additionally, it seems to cease all network activity. It doesn't seem to log any errors at all. I've verified that this is not a monitor issue, as when I press the num/caps/scroll lock buttons on my keyboard, the lights don't change, so the computer is clearly not accepting input. I have noticed a few other people on the internet with this problem, and some have claimed that it was solved by disabling PCI-Express Link State Power Management, but the issue still occurs for me after this. Whilst my CPU and GPUs both run at 100% 24/7, the temperatures are certainly not at dangerous levels, with the CPU averaging 65°C and the GPUs at 70°C and 78°C average. All components are brand new. I have tried forcing MSI Afterburner to start when Windows starts and to force a constant voltage, as this fixed the issue for a few days for another user, but he reported back saying that it had stopped working properly again, so I'm not putting too much faith in this working. Many people have said to adjust display sleep mode settings, but this will clearly not work, as the keyboard lights would still work if the monitors were the issue. The closest I can get to a log file for this issue is the following Folding@Home logs: 14:45:21:WU01:FS00:0x17:Completed 1120000 out of 2000000 steps (56%) 14:46:43:WU00:FS01:0x17:Completed 480000 out of 2000000 steps (24%) 14:46:49:WU01:FS00:0x17:Completed 1140000 out of 2000000 steps (57%) 14:48:30:WU01:FS00:0x17:Completed 1160000 out of 2000000 steps (58%) 14:49:55:WU01:FS00:0x17:Completed 1180000 out of 2000000 steps (59%) As you can see, the second GPU (FS01) stops computation approximately three and a half minutes before the issue occurs (it should be completing 1% every 80-120 seconds), and the first GPU (FS00) continues for a few minutes more before the logs just end. As far as I can tell, the computer has a network failure at the time the first GPU stops working, the latest IRC message I received from this time was at 14:47:58. That being said, there could have just not been any messages between then and 14:50:00, so I'm going to be connecting a laptop to the same bouncer to double-check if it happens again. The GPUs functioned perfectly well in another computer for a significant period of time, so I'm fairly confident that they aren't the issue, which means that this is being caused by either software or the motherboard, or possibly RAM. I really hope it's software. I heard from a forum board that there was a patch from Microsoft that fixed this problem, but "I've forgot which KB it was or the google search terms I used to find the patch, LOL.", so that's not much help. Haven't seen it mentioned by anyone else on about a dozen threads about this issue either. The computer is plugged in via a surge-protected power board, and I've run several other computers and pieces of hardware through it with no issues, so that is not the cause. I have just set the hard disk to never turn off, although I don't believe that that will solve the issue. Strangely, this has only happened when I'm not at the computer (which is actually a minority of the time). Until today it had only happened when I had not been actively using the computer for 6 hours, but today it happened within 10-30 minutes of me last using the computer actively. I have enabled file logging from MSI Afterburner, so hopefully this will shed some light on the issue, but I'm not too optimistic. I've heard that it could be a motherboard problem, but I figured I should ask around before RMAing it. Any help?

    Read the article

  • CodePlex Daily Summary for Monday, May 17, 2010

    CodePlex Daily Summary for Monday, May 17, 2010New Projects.NET Essentials Course: .NET Essentials course @ Telerik Academy Training project for the studentsAU/NZ Office 2010 Launch Demos: The AU/NZ Office 2010 Launch Demos are a collection of code samples that were used as part of the Office/SharePoint 2010 launch parties in Australi...CybennyCMS: Very simple CMS system for building sites with ASP.NET with templates for lay-out, content pages with only html content and a xml file for the site...essionPIM: essionPIMGIStance: A library for finding "nearest neighbor" among an in-memory set of positions, in C# and F#. A radius must be specified for making a meaningful s...IP Informer: IP Informer is IP Informer.Kurumsal Ofis Paketi: Kurumsal Ofis Paketi (KOP), Microsoft Ofis 2010 ürünleri için geliştirilmiş eklenti yazılımıdır. KOP, Word ve Excel’de bulunan işlevlerinin genişle...Mockup to XAML: Convert Balsamiq Mockups to XAML. This project supports BMML mockup control conversion using plugins. A standard set of controls are included wit...Open XML Validator: This WPF app give you a brief resume about errors in your Open XML documents.Paint.NET Bulk Image Processor: PDNBulkUpdater is a plug-in for Paint.NET that allows you to efficiently perform operations such as resizing and converting multiple images at the ...PiPiBugNet: PiPiBugNet是一套全新的开源Bug管理系统Roleplay character generator: The roleplay character generator allows the creation of characters for different roleplaying gamesSharePoint User Search WebParts: This project contains SharePoint webparts which provide advanced search configuration and experience for SharePoint 2007. It will be upgrade in few...Spodi: Spodi is created on 22-04-2010TfsPolicyPack: This project will provide a few checkin policies for VS 2010.vccodesandobx: vccodesandobxvccodesandobxvccodesandobxWhiteNile: test project using codeplexNew ReleasesAnimeStore.Net: 1.0.3.0: Build 1.0.3.0 Changes Move some functionality to features (MEF) Filter / Search functionality. Anime hard-copy records storage (e.g Disk Storage ...AU/NZ Office 2010 Launch Demos: Twitter map web part: This is the main twitter map web part download, see the Twitter Map web part page for all the information.Blueset Studio Opensource Projects: 推来: 稳定版本BUtil: BUtil 5.0 Alpha2: The initial implementation of multitasking (except ghost)CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 and 4.0.1 beta: Beta 2 is released here: url http://cassinidev.codeplex.com/releases/view/45456 New in CassiniDev v3.5.1.0/v4.0.1.0 Added .Net 4 / VS10 build. ...CBM-Command: 2010-05-16: Release Notes - 2010-05-16New Features New navigation options: Page Up, Page Down, Top of Directory, Bottom of Directory. See documentation (http:...CCNet Conditional Plugin: CCNet Conditional for CCNet 1.5: A (quick) build of the plugin for CCNet 1.5 to fix the 17365 bug reported by Beakster. This also adds a new condition "timeCondition"CybennyCMS: Cybenny CMS beta 1: The first beta. Includes a small demo site.Data Extracting SDK: Data Extracting SDK v.1.1 RTM: RTM version of Data Extracting SDK.Duckworth Lewis Professional Edition Calculator: DLcalc 2.0: This software can perform all D/L calculations 100% accurately. From version 2.0 onwards, tables for par scores can also be produced.EPiServer CMS Page Type Builder: Page Type Builder 1.2: Release notes can be found in this blog post.Floe IRC Client: Floe IRC Client 2010-05 R5: - Many new context menu options for @s - Ability to select multiple users in the nick list for some operations (kick, ban) - Bunch of minor bug fix...Graffiti CMS Events Plugin: Version 1.0.1: Minor update to previous version to fix bug where deleted posts were still showing in the calendar.Microsoft Research Boogie: 2010-05-16: Binary release of Boogie and Dafny. (Note, Chalice is not pre-built as part of this binary release. To obtain it, you need to build it yourself f...MSBuild Launch Pad (mPad): 1.0 Beta 2: Basic support for sln, csproj, vbproj, vcxproj, shfbproj, ccproj, oxygene and proj files are added. Basic settings (Show Prompt, and Auto Hide) are...Multi-Language Words Memorizer: Memorizer 1.1: Issues fix, XML db update with new words.NShader - HLSL - GLSL - CG - Shader Syntax Highlighter AddIn for Visual Studio: NShader 1.1: New release of NShader! New : - a Visual Studio 2010 port can be installed through the new extension manager : you just have to download NShaderV...PHPExcel: PHPExcel 1.7.3 Production: Want to contribute?Please refer the Contribute page. DonationsDonate via PayPal. If you want to, we can also add your name / company on our Donati...Rollback - A social backup tool.: Rollback Setup 0.5.1.2 Build 48360: Bug fixes for backing up files which are hidden/system. Changes to make builds on 64 bit Windows 7 using VS 2010 Express edition.Rollback - A social backup tool.: Rollback Setup 0.5.1.3: Updated version number.Shake - C# Make: Shake v0.1.20: New: Simple console logger Changes: Command line params helper writes out syntax and samples (like msbuild) Fixes: Assembly info, file task and r...SharePoint User Search WebParts: v0.1 Friendly MOSS 2007 Search WebPart: Very first version of this webpart. A more stabilized version will follow in few days.Team Deploy: Team Deploy 2010 Beta 1: This is the initial release for Team Deploy 2010 for TFS Team Build 2010. All features from Team Build 2.x are functional in this version. Comp...Team Foundation Server Administration Tool: 2.0: TFS Administration Tool 2.0 TFS Administration Tool 2.0 is built on top of the Team Foundation Server 2008 object model and in order to connect to...The Ping Master: v0.9.0.0: Installer for The Ping Master binariesUseful Office Macros: All Macro Downloads: Please find above the downloads related to this project. Each Excel Workbook below works independently of the others, so you only need to download...VCC: Latest build, v2.1.30516.0: Automatic drop of latest buildVisual Studio DSite: Advanced Digital Board Game (Visual C++ 2008): An advanced digital board game made in visual c 2008.YUI Compressor Custom Tool for Visual Studio: YUI Compressor Custom Tool Full Version: Version 1.0 The following changes have been made: Merged classes to automatically sense if the target file is Javascript or CSS. Cleaned up setu...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryPHPExcelBlogEngine.NETRawrMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersDotNetZip LibraryCaliburn: An Application Framework for WPF and SilverlightSQL Server PowerShell Extensions

    Read the article

  • What's the best/most efficent way to create a semi-intelligent AI for a tic tac toe game?

    - by Link
    basically I am attempting to make a a efficient/smallish C game of Tic-Tac-Toe. I have implemented everything other then the AI for the computer so far. my squares are basically structs in an array with an assigned value based on the square. For example s[1].value = 1; therefore it's a x, and then a value of 3 would be a o. My question is whats the best way to create a semi-decent game playing AI for my tic-tac-toe game? I don't really want to use minimax, since It's not what I need. So how do I avoid a a lot of if statments and make it more efficient. Here is the rest of my code: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <time.h> struct state{ // defined int state; // 0 is tie, 1 is user loss, 2 is user win, 3 is ongoing game int moves; }; struct square{ // one square of the board int value; // 1 is x, 3 is o char sign; // no space used }; struct square s[9]; //set up the struct struct state gamestate = {0,0}; //nothing void setUpGame(){ // setup the game int i = 0; for(i = 0; i < 9; i++){ s[i].value = 0; s[i].sign = ' '; } gamestate.moves=0; printf("\nHi user! You're \"x\"! I'm \"o\"! Good Luck :)\n"); } void displayBoard(){// displays the game board printf("\n %c | %c | %c\n", s[6].sign, s[7].sign, s[8].sign); printf("-----------\n"); printf(" %c | %c | %c\n", s[3].sign, s[4].sign, s[5].sign); printf("-----------\n"); printf(" %c | %c | %c\n\n", s[0].sign, s[1].sign, s[2].sign); } void getHumanMove(){ // get move from human int i; while(1){ printf(">>:"); char line[255]; // input the move to play fgets(line, sizeof(line), stdin); while(sscanf(line, "%d", &i) != 1) { //1 match of defined specifier on input line printf("Sorry, that's not a valid move!\n"); fgets(line, sizeof(line), stdin); } if(s[i-1].value != 0){printf("Sorry, That moves already been taken!\n\n");continue;} break; } s[i-1].value = 1; s[i-1].sign = 'x'; gamestate.moves++; } int sum(int x, int y, int z){return(x*y*z);} void getCompMove(){ // get the move from the computer } void checkWinner(){ // check the winner int i; for(i = 6; i < 9; i++){ // check cols if((sum(s[i].value,s[i-3].value,s[i-6].value)) == 8){printf("The Winner is o!\n");gamestate.state=1;} if((sum(s[i].value,s[i-3].value,s[i-6].value)) == 1){printf("The Winner is x!\n");gamestate.state=2;} } for(i = 0; i < 7; i+=3){ // check rows if((sum(s[i].value,s[i+1].value,s[i+2].value)) == 8){printf("The Winner is o!\n");gamestate.state=1;} if((sum(s[i].value,s[i+1].value,s[i+2].value)) == 1){printf("The Winner is x!\n");gamestate.state=2;} } if((sum(s[0].value,s[4].value,s[8].value)) == 8){printf("The Winner is o!\n");gamestate.state=1;} if((sum(s[0].value,s[4].value,s[8].value)) == 1){printf("The Winner is x!\n");gamestate.state=2;} if((sum(s[2].value,s[4].value,s[6].value)) == 8){printf("The Winner is o!\n");gamestate.state=1;} if((sum(s[2].value,s[4].value,s[6].value)) == 1){printf("The Winner is x!\n");gamestate.state=2;} } void playGame(){ // start playing the game gamestate.state = 3; //set-up the gamestate srand(time(NULL)); int temp = (rand()%2) + 1; if(temp == 2){ // if two comp goes first temp = (rand()%2) + 1; if(temp == 2){ s[4].value = 2; s[4].sign = 'o'; gamestate.moves++; }else{ s[2].value = 2; s[2].sign = 'o'; gamestate.moves++; } } displayBoard(); while(gamestate.state == 3){ if(gamestate.moves<10); getHumanMove(); if(gamestate.moves<10); getCompMove(); checkWinner(); if(gamestate.state == 3 && gamestate.moves==9){ printf("The game is a tie :p\n"); break; } displayBoard(); } } int main(int argc, const char *argv[]){ printf("Welcome to Tic Tac Toe\nby The Elite Noob\nEnter 1-9 To play a move, standard numpad\n1 is bottom-left, 9 is top-right\n"); while(1){ // while game is being played printf("\nPress 1 to play a new game, or any other number to exit;\n>>:"); char line[255]; // input whether or not to play the game fgets(line, sizeof(line), stdin); int choice; // user's choice about playing or not while(sscanf(line, "%d", &choice) != 1) { //1 match of defined specifier on input line printf("Sorry, that's not a valid option!\n"); fgets(line, sizeof(line), stdin); } if(choice == 1){ setUpGame(); // set's up the game playGame(); // Play a Game }else {break;} // exit the application } printf("\nThank's For playing!\nHave a good Day!\n"); return 0; }

    Read the article

  • WordPress contact form email as PDF

    - by lock
    I am using the below code for my WordPress site which is emailing all the form details as an HTML text but I need the details to be written into a PDF first and then have to email the PDF as an attachment. How can I achieve this? This is not a PHP code to use PHP's writePDF modules. So, any idea or any code to implement this? <div style="padding-left: 100px;"> [raw] [contact-form subject="Best Aussie Broker" to="[email protected]"] <div id="main34" style="border: 1px solid black; border-radius: 15px; width: 720px; padding: 15px;"> &nbsp; <h2><span style="color: #ff6600;">Express Application</span></h2> &nbsp; [contact-field label="First Name" type="name" required="true" /] [contact-field label="Last Name" type="text" /] [contact-field label="Email" type="email" required="true" /] [contact-field label="Purpose of Finance?" type="select" options="Home Loan,Refinance,Investment Loan,Debt Consolidation,Other" /] [contact-field label="Your deposit amount" type="text" /] [contact-field label="Amount you need to borrow?" type="text" /] [contact-field label="Brief description of the purpose for finance" type="textarea" required="true" /] <div><label></label> <input class="radio" type="radio" name="19" value="Single Application" onchange="showsingle();" /> <label class="radio">Single Application</label> <div class="clear-form"></div> <input class="radio" type="radio" name="19" value="Joint Application" onchange="showjoint();" /> <label class="radio">Joint Application</label> <div class="clear-form"></div> [contact-field label="Privacy Act" type="checkbox" required="true" /] I have read the Privacy Act 1988 (as Amended) and understand that by selecting the submit button I/we Authorize Best Aussie Broker to act on my/our behalf and manage personal information in relation to this application.<br> <a href="http://googleplex.com.au/pdf.pdf"><img src="http://googleplex.com.au/pdf.png" alt="" /> </a> </div> </div> <div id="single" style="display: none; width: 720px; border: 1px solid black; border-radius: 15px; padding: 15px; margin-top: 10px;"> <div style="padding-top: 10px; width: 720px; text-align: left;"> <h4><span style="color: #ff6600;">Last step then we will get all listed Australian vendors to fight it out for your best deal</span></h4> </div> <div> <label class="select" for="19-date-of-birth">Date of Birth</label> [contact-field label="Day" type="select" options="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" /] [contact-field label="Month" type="select" options="January,February,March,April,May,June,July,August,September,October,November,December" /] [contact-field label="Year" type="select" options="2000,1999,1998,1997,1996,1995,1994,1993,1992,1991,1990,1989,1988,1987,1986,1985,1984,1983,1982,1981,1980,1979,1978,197,1976,1975,1974,1973,1972,1971,1970,1969,1968,1967,1966,1965,1964,1963,1962,1961,1960,1959,1958,1957,1956,1955,1954,1953,1952,1951,1950,1949,1948,1947,1946,1945,1944,1943,1942,1941,1940,1939,1938,1937,1936,1935,1934,1933,1932,1931,1930,1929,1928,1927,1926,1925,1924,1923,1922,1921,1920, 1919,1918,1917,1916,1915,1914,1913,1912,1911,1910,1909" /] </div> [contact-field label="Address" type="text" /] [contact-field label="Suburb" type="text" /] [contact-field label="Postcode" type="text" /] <div> [contact-field label="State" type="select" options="VIC,NSW,QLD,SA,WA,TAS,NZ,Other" /] </div> [contact-field label="Best Contact" type="radio" options="Landline,Mobile" /] [contact-field label="Phone Number" type="text" /] [contact-field label="Marital Status" type="select" options="Married,Single,Other" /] [contact-field label="Residential Status" type="select" options="Renting, Home Owned, Home Mortgage, Board, Other" /] [contact-field label="Children/Dependents" type="select" options="0,1,2,3,4,5,6" /] <div></div> [contact-field label="Gross Yearly Income" type="text" /] [contact-field label="Current Employer" type="text" /] <div> <label class="select" for="19-year-of-empl">Time at this employer</label> [contact-field label="Year" type="select" options="0,1,2,3,4,5,6,7,8,9,10,More" /] [contact-field label="Month" type="select" options="0,1,2,3,4,5,6,7,8,9,10,11,12" /] </div> <div style="padding-right: 15px;"></div> </div> <div id="joint" style="display: none; width: 720px; border: 1px solid black; border-radius: 15px; padding: 15px; margin-top: 10px;"> <div style="padding-top: 10px; width: 720px; text-align: left;"> <h4><span style="color: #ff6600;">Last step then we will get all listed Australian vendors to fight it out for your best deal</span></h4> </div> <div style="float: left; width: 320px;"> <div> <label class="select" for="19-date-of-birth1">Date of Birth</label> [contact-field label="Day" type="select" options="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" /] [contact-field label="Month" type="select" options="January,February,March,April,May,June,July,August,September,October,November,December" /] [contact-field label="Year" type="select" options="2000,1999,1998,1997,1996,1995,1994,1993,1992,1991,1990,1989,1988,1987,1986,1985,1984,1983,1982,1981,1980,1979,1978,197,1976,1975,1974,1973,1972,1971,1970,1969,1968,1967,1966,1965,1964,1963,1962,1961,1960,1959,1958,1957,1956,1955,1954,1953,1952,1951,1950,1949,1948,1947,1946,1945,1944,1943,1942,1941,1940,1939,1938,1937,1936,1935,1934,1933,1932,1931,1930,1929,1928,1927,1926,1925,1924,1923,1922,1921,1920, 1919,1918,1917,1916,1915,1914,1913,1912,1911,1910,1909" /] </div> [contact-field label="Address" type="text" /] [contact-field label="Suburb" type="text" /] [contact-field label="Postcode" type="text" /] <div> [contact-field label="State" type="select" options="VIC,NSW,QLD,SA,WA,TAS,NZ,Other" /] </div> [contact-field label="Best Contact" type="radio" options="Landline,Mobile" /] [contact-field label="Phone Number" type="text" /] <div></div> <div></div> [contact-field label="Marital Status" type="select" options="Married,Single,Other" /] [contact-field label="Residential Status" type="select" options="Renting, Home Owned, Home Mortgage, Board, Other" /] [contact-field label="Children/Dependents" type="select" options="0,1,2,3,4,5,6" /] <div></div> <div><label class="text" for="netincome">Net Income</label> <input id="netincome" type="text" name="netincome" /> <select id="netincome-dropdown" name="netincome-dropdown"> <option>Monthly</option> <option>Yearly</option> </select></div> [contact-field label="Current Employer" type="text" /] <div> <label class="select" for="19-year-of-empl2">Time at this employer</label> [contact-field label="Year" type="select" options="0,1,2,3,4,5,6,7,8,9,10,More" /] [contact-field label="Month" type="select" options="0,1,2,3,4,5,6,7,8,9,10,11,12" /] </div> </div> <div style="float: right; width: 320px; padding-right: 50px;"> <div> <label class="select" for="19-date-of-birth3">Date of Birth</label> [contact-field label="Day" type="select" options="1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31" /] [contact-field label="Month" type="select" options="January,February,March,April,May,June,July,August,September,October,November,December" /] [contact-field label="Year" type="select" options="2000,1999,1998,1997,1996,1995,1994,1993,1992,1991,1990,1989,1988,1987,1986,1985,1984,1983,1982,1981,1980,1979,1978,197,1976,1975,1974,1973,1972,1971,1970,1969,1968,1967,1966,1965,1964,1963,1962,1961,1960,1959,1958,1957,1956,1955,1954,1953,1952,1951,1950,1949,1948,1947,1946,1945,1944,1943,1942,1941,1940,1939,1938,1937,1936,1935,1934,1933,1932,1931,1930,1929,1928,1927,1926,1925,1924,1923,1922,1921,1920, 1919,1918,1917,1916,1915,1914,1913,1912,1911,1910,1909" /] </div> [contact-field label="Address" type="text" /] [contact-field label="Suburb" type="text" /] [contact-field label="Postcode" type="text" /] <div> [contact-field label="State" type="select" options="VIC,NSW,QLD,SA,WA,TAS,NZ,Other" /] </div> [contact-field label="Best Contact" type="radio" options="Landline,Mobile" /] [contact-field label="Phone Number" type="text" /] <div></div> <div></div> [contact-field label="Marital Status" type="select" options="Married,Single,Other" /] [contact-field label="Residential Status" type="select" options="Renting, Home Owned, Home Mortgage, Board, Other" /] [contact-field label="Children/Dependents" type="select" options="0,1,2,3,4,5,6" /] <div></div> <div><label class="text" for="netincome">Net Income</label> <input id="netincome" type="text" name="netincome" /> <select id="netincome-dropdown" name="netincome-dropdown"> <option>Monthly</option> <option>Yearly</option> </select></div> [contact-field label="Current Employer" type="text" /] <div> <label class="select" for="19-year-of-empl">Time at this employer</label> [contact-field label="Year" type="select" options="0,1,2,3,4,5,6,7,8,9,10,More" /] [contact-field label="Month" type="select" options="0,1,2,3,4,5,6,7,8,9,10,11,12" /] </div> </div> <div style="clear: both;"></div> <div></div> </div> &nbsp; [/contact-form][/raw] </div>

    Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >