Search Results

Search found 1868 results on 75 pages for 'board'.

Page 40/75 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Wake network adapter from deep sleep mode

    - by BeatMe
    I recently buyed a new Mainboard (Asrock ALiveXFire) and got some trouble with the network adapter. After switching my Windows 7 x64 in energey saving mode and returning from it, my network adapter couldn't be found. After some googling I found out, that apparently my network adapter has been put in a deep sleep mode and didn't reactivate. Their solution was to switch the PC off, take out the RAM and the CMOS battery for some time. After that, the adapter should be powered on again, but that didn't happen for me. I waited several hours before turning my PC on again, but that didn't help. Formatting and reinstalling didn't help either. The network adapter is not found in the hardware manager and reinstalling the drivers didn't help. I have the newest BIOS installed on the mainboard. I literally don't know what to try next. I'm thinking of returning my board, but I would like to avoid the hassle.

    Read the article

  • Are Motherboards for the Acer Aspire One AOA150 Netbook Compatible with the AOA110?

    - by Mindstormscreator
    I have an Acer Aspire One ZG5 AOA110-1588 netbook, and the motherboard doesn't have a port for a SATA 2.5 inch hard drive; it only supports this slow 8GB SSD type drive. Through research I've discovered that the AOA150 motherboards do have a SATA slot, and the bottom plate of these laptops have an appropriate protrusion for the drive to fit in (for example, compare this to this). The AOA110 and AOA150 models are very similar in appearance and specs. I've even seen tutorials that involve soldering a SATA connector onto the AOA110's motherboard, essentially creating an AOA150 motherboard (right?) So, could I just swap out the motherboard in my netbook with the MBS0506001? (I'd post another link to the actual board but can't because of the spam prevention...) I assume I would also need to purchase and replace the bottom cover with a larger one and possibly get a hard drive caddy as well...? Thanks!

    Read the article

  • Should I use SSD Caching on non bootable HD?

    - by Onema
    I have an asus 9p79x pro which allows me to do SSD Caching. I have a 256 GB SSD drive that I use an my primary boot drive, and I have a 1 TB disk where I put most of my games, music, videos, dowloads, pictures, etc. I also have an extra 64 GB SSD Drive that I'm currently not using. I thought it would be a good idea to use it as my 1 TB disk cache and improve the load time of games and programs that are installed on the 1 TB disk; but will this work correctly? It seems from all that I have read online about this board that it is used to cache a boot drive. Any thoughts? Thank you

    Read the article

  • Dedicated GPU in Dell PowerEdge C1100

    - by Eli Gundry
    We recently purchased a Dell PowerEdge C1100 off lease with the initention of using it for graphics processing. We installed an AMD HD 7000 series GPU in it that runs off of board power and it sends video to the display. That said, the video is very choppy, leading us to belive that the onboard video is doing all the processing and sending it to the card. Is there any way to either disable the VGA on this server or tell the OS to only use the dedicated card. More info: The server is running REHL 6.4 The graphics running the proprietary AMD drivers The video card only works in OS and does not show the BIOS on boot (we know that it's impossible to change this) Any ideas, guys? Update We are now thinking that the GPU is doing the graphics processing, but not working at the full speed of the PCI bus. Which is odd, because it is an x16 slot, but probably optimized to use a RAID card (if that makes any sense). Is there any way to remedy the choppy graphics on this server?

    Read the article

  • Bluetooth not seeing mouse (Fedora)

    - by Chris
    I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt), blueman-manager, or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

    Read the article

  • Roundcube can't connect to PostgreSQL database

    - by kenny.r
    I'm trying to install Roundcube on a CentOS 5.5 server, with a PostgreSQL 8.1.22 database. The first page of the installer script, that checks for the presence of php libraries and such, gives me green OKs across the board. I even went out of my way to install the optional ones. Page two generates me two configuration files (main.inc.php and db.inc.php) which I put into place. Page three is where things go wrong: Check DB config DSN (write): NOT OK(MDB2 Error: connect failed) Make sure that the configured database exists and that the user has write privileges DSN: pgsql://roundcube:password@localhost/roundcubemail The info you see there (user roundcube, password password, server localhost and database roundcubemail) is all correct. The database roundcubemail belongs to the user roundcube and it has write permissions. I have no clue why it can't connect to that database. I'm managing it with phpPgAdmin, which is running on the very same Apache, on the same server!

    Read the article

  • Windows 8.1 unable to play Music or the Audio from videos through Optical Out

    - by Zion Fox
    I am having an issue with my audio output, where any music file, and the audio side of videos are not being played through my optical audio output. I am running a Realtek HD Audio device built on Revision 1.0 on a GA-P55A-UD6 Gigabyte Board, which runs through it's optical output to an Astro A40 Mixamp, which does some upscaling before sending it to the headset. Now, notification sounds, and sounds/videos/music played through the browser or programs like Skype or games are working fine. This seems to specifically effect Foobar2000 and Media Player Classic. I have updated these two programs to their latest revisions, in addition to the soundcard drivers to no avail, and searching the error code thrown by Foobar2000: Unrecoverable playback error: The parameter is incorrect. (0x80070057) through Google returns not very helpful results, other than the one potentially mentioning DRM. This issue I am having a very hard time resolving, and am wondering if anyone here has experienced similar issues after updating.

    Read the article

  • Computer has video artifacts after been exposed to rain

    - by Sadie
    My desktop now displays video artifacts after been exposed to rain. Only a very small amount of moisture went inside the case. The only place I noticed any water was on the CPU socket. I used a hair dryer and paper towels to wick any remaining moisture. When I boot the PC it loads it the OS, but there are large numbers of video artifacts. The artifacts appear symmetric if that helps. I am wondering what components I need to replace. I'd like to salvage what I can. My setup: AMD Athlon x3, Asus main board (AM2 socket), nVidia GT 430 PCIe, 8gb (4gb x2) DDR3

    Read the article

  • Creative software leftovers - ASIO error message

    - by Tony Patriarche
    I temporarily installed an old Creative Audigy 2 soundboard on my Vista x64 Home Premium computer. Bad idea! I uninstalled the board & all software visible on the control panel. Now, with one particular app. (Sibelius) I keep getting a start-up message "CTASIO Warning: Creative ASIO: there are no Creative audio products installed on the system that support ASIO". I offer this as a candidate for "Most useless message", but that's beside the point. I used a commercial registry cleaner (PC-Tools Registry Mechanic) and then edited the registry looking for "creative", "audigy" and "ASIO". After removing everything I could find, I still get the message. Any suggestions?

    Read the article

  • dev_install failed on ARM chromebook

    - by user1027721
    I'm trying this guide for having access to emerge on chromeos. http://www.chromium.org/chromium-os/how-tos-and-troubleshooting/install-software-on-base-images Unfortunately I always got the same error which is $ sudo dev_install Starting installation of developer packages. First, we download the necessary files. Downloading https://commondatastorage.googleapis.com/chromeos-dev-installer/board/daisy/full-3.168.0.0/packages/app-misc/mime-types-8.tbz2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 127 100 127 0 0 252 0 --:--:-- --:--:-- --:--:-- 305 [: 184: -ne: unexpected operator Extracting /usr/local/portage/packages/app-misc/mime-types-8.tbz2 I think that it somehow returns a 404 everytime. Thanks for your help

    Read the article

  • HTTP Non-persistent connection and objects splitting

    - by Fabio Carello
    I hope this is the right board for my question about HTTP protocol with non-persistent connections. Suppose a single request for a html object that requires to be split in two different HTML response messages. My question is quite simple: do the connection will be closed after the first packet dispatch and then the other one will be sent on a new connection? I can't figure out if the non-persistent connection is applied at "single object level" (does't care if on multiples messages) or for every single message. Thanks for your answers!

    Read the article

  • How low-power can a home server get?

    - by Halik
    I've got quite simple question actually. How green, low-power and efficient x86 home server can I build using consumer parts with rather constrained budget. After looking through some Google hits I've found out that system based on dual-core atom, some modest mITX board (gigabit lan, integrated audio and gfx etc), one RAM module and one 'green' WD HDD, powered by picoITX PSU uses about 30W at idle up to 40 at load. Can you get lower (or how much lower) then that? Maybe some VIA nano chips, or single core atom? My home server would take care of some back-upping mixed with little ftp/http traffic.

    Read the article

  • Freebsd or Linux? as BGP router over 100mbps

    - by Yucong Sun
    I am building a server to act as a BGP border router for my 100mbps uplink in ISP. I needs these feature: 1) Dual stack BGP peering/routing (at least 100Mbps, maybe more). 2) Potential full internet BGP feed. 3) Some basic ACL functionality. The hardware is L3426/8G ram. NIC will be on-board dual port Broadcom 5716. I've worked with Linux extensively before and it seems to be able to handle 100mbps, but I heard FreeBSD is faster on networking stuff. Which one should I use? And do we have some performance benchmark numbers out there? Cheers.

    Read the article

  • Windows 7 Service Pack 1 Install Failing

    - by Cu Jimmy
    I am having real trouble updating one of my machines to Win7 Service Pack 1. Its an Asus P5K board with an X9650 Quad Core Extreme chip, which is a less common type of chip. Was wondering if anyone has had issues with this kind of kit or if it may just be the motherboard is a little gone. The error message I get back from Microsoft Update is WindowsUpdate_80091007 and WindowsUpdate_dt000 which are fairly generic errors. Tried installing with the sp1 file based installer and got nowhere. The actual installer crashes with an SP Installer has crashed Its a fresh install on a fully scrubbed drive (an Intel 120GB SSD).

    Read the article

  • Linux Bluetooth [closed]

    - by Chris
    Not sure if this is the proper forum; please forgive me if it's not... I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run either hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt) or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

    Read the article

  • Super-silent (mid tower) case and fan combo

    - by Dennis G.
    I want to build a HTPC for music/video/blu-ray playback (no gaming). I don't need an expensive HTPC case but just want to go with a standard medium tower case. However, I want it to be super silent so it doesn't make any annoying fan/disk noises when I watch movies. Ideally, it shouldn't make any noticeable noise at all. I understand that choosing a board, CPU and graphic card that run cool and don't consume a lot of power is important for designing a quiet machine, and I think I got that covered. However, there are so many choices in regards to cases, fans and power supplies that it's hard to get started. What are your recommendations for a case/fan (cpu+case)/power supply combination that run absolutely silent and can cool a standard Intel system with a low-power (possibly passively cooled) graphic card? I'm usually a fan of Antec cases, would an Antec Mini P180 be a good starting point? If so, which case fans, CPU fan and power supply would you recommend?

    Read the article

  • Considering building a new system; but undecided about chassis

    - by J.C. Bengtson
    I'm considering a new system build, and was thinking that this particular motherboard has features I need and like: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=667651&pagenumber=1&RSort=1&csid=ITD&recordsPerPage=5&body=REVIEWS#CustomerReviewsBlock .. but am unsure which model chassis to pair it with. I'd strongly prefer something from Cooler Master, as I'm a fan of their products, but am having a hard time deciding, and also don't want to get into some odd situation where the board doesn't properly fit. I plan on having two optical drives (5.25"), two internal HDs (3.5"), and will likely go with an SLI setup of 2 or possibly even 3 cards, so I'd need a chassis that is roomy enough to accomodate all of that, as well as the motherboard itself. Based on the stock available at that same site, do you all have any suggestions? The larger, the better, as I hate having components crammed together. Your help is most appreciated!

    Read the article

  • How do you confirm network adapter is gigabit capable?

    - by StrandedPirate
    Upgrading my network to gigabit speeds and don't know how to determine if the NIC in one of the systems is capable of gigabit speed. The documentation from the manufacturer states this: Network adapter 10/100/1000 Ethernet LAN on system board However when I go to the properties of the NIC under Speed & Duplex my only options are: 10 Mb Full 10 Mb Half 100 Mb Full 100 Mb Half Auto Is there a command line I can run that will give me more detail about the NIC? Windows 7 x64 OS New Info: The new switch I just bought has a light to indicate 1000Mbps. I can tell from the light that this NIC is indeed negotiating at 1000Mbps but I'd still like to know how to determine this from the console in windows.

    Read the article

  • Post Error, Fixed/Removable Media Error

    - by Dan
    Hi, I really do not know what I am missing here. I ordered parts for a new server. The board is an Intel s3420GP. From the diagnostic LEDs I get the error message: 0xB1h which corresponds to "Fixed Media: Disabling fixed media" and 0xB8h which corresponds to "Removable Media: Resetting removable media device." I can not for the life of me figure out what it is talking about. I have two identical motherboards and both gave the error message. I don't have a second CPU yet, so I can't test that. There are no beeps or anything. It seems the server resets every 10 seconds or so (the speaker does work, I put the RAM in the wrong slots on purpose to test this out, and the correct error POST code came up) Please help me, I'm not sure where else to turn or to ask

    Read the article

  • Windows 7 Via Hyperion 4-1 drivers

    - by Gratzy
    I have a clean install of Win 7 on some relatively old hardware. Everything works pretty well however my cpu is pegged at 100% most of the time. Task Manager shows srvchost as being a main culprit of course but also system interrupts. I have a Biostar socket 478 MB with Via chipset. I have tried to find Windows 7 drivers for this but when I download and try to install what VIA/BIOSTAR say should be good for all OS's it will not load. I get a message saying can't find components for this OS. Anybody have any idea where I might find suitable drivers for the Chipset? BTW I'm not using the integrated graphics on the board but have a radeon 4500 pci-e card.

    Read the article

  • USB ports not recognizing devices (vista)

    - by frank
    I'm trying to fix a problem on a Vista machine where all the USB ports seem to have power but they don't recognize devices plugged into them. It seemed to start after I plugged my mp3 player (sansa clip) into it and disconnect it. So it sounds similar to this article http://support.microsoft.com/kb/817900 but that was for XP. And I did try all the fixes (including the registry entry) but they did not help. It also sounds similar to this SU question 50110 but I don't think it is the mother board. I have see other places that suggest reinstalling the OS...but that seems like a last resort type of thing. I have also seen a suggestion of doing a system restore but not sure if that will help. Any ideas of what I can try?

    Read the article

  • Getting BootMgr not found errors repeatedly on Win7 x64

    - by abszero
    So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

    Read the article

  • What is this component?

    - by bAN
    Hi everyone, i'm just looking an old mother board waiting for my favorite TVShow and and i wonder what's this component? Every motherboard i've seen have this kind of solenoid (I am sure that you already settled this question). But what is this? What is his function? If an hardware specialist can try to answer my question.. I will be an happy man.. I join a Picture.. Strange and mystic kind of solenoid.

    Read the article

  • OpenSolaris with no gcc vs. Nexenta with no ext3

    - by Jake Wharton
    I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

    Read the article

  • What is meant by the terms CPU, Core, Die and Package?

    - by lovesh
    Now this might sound like too many previous questions, but I am really confused about these terms. I was trying to understand how "dual core" is different from "Core 2 Duo", and I came across some answers. For example, this answer states: Core 2 Duo has two cores inside a single physical package and dual core is 2 cpu in a package 2 cpu's in a die = 2 cpu's made together 2 cpu's in package = 2 cpu's on small board or linked in some way Now, is a core different from a CPU? What I understand is there is something that does all the heavy computation, decision making, math and other stuff (aka "processing") is called a CPU. Now what is a Core? And what is a processor when somebody says he has got a Core 2 Duo? And in this context what is a Package and what is a Die? I still don't understand the difference between Core 2 Duo and Dual Core. And can somebody explain hyper-threading (symmetric multi-threading) too if they are super generous?

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >