Search Results

Search found 36652 results on 1467 pages for 'linux device driver'.

Page 38/1467 | < Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Linux Live CD for old computer

  - by Joel Coehoorn

  I have a pentium II (that's right, pentium II) with a scant 200MB of ram. This was a high-end workstation in it's day. The machine currently runs dos on a raid array, and I need to pull some data from it. I figure my best chance at this is to use a linux live cd to copy the data to one of our active directory network shares (there is a network card in the machine). Unfortunately, my linux skills are abysmal, so I'm not sure where to get started: Where should I look to find a linux cd that will run well on such an old system Since I'm likely gonna need to be command-line only, what do I need to do to configure the network card and mount the network share via the command line? Bonus points: exact syntax needed to copy and convert the entire volume for use in VMware server 2.0, but really just copying all the data should be enough.

  Read the article

• How to create a bootable Ubuntu Linux (10.04) USB installation for Macintosh

  - by vdavidovski

  I tried searching the Internet, but could not find a decent tutorial explaining how to create a bootable Ubuntu Linux (10.04) USB installation that could be run not only on a PC but also on Macs and MacBook Pros. In addition, I tried refit, but ended with "Missing operating system" error. Here is basically the layout of my bootable under PC Ubuntu USB drive (using MBR): Partition 1 (ext3, bootable) - Ubuntu Linux 32 bit, contains also grub2 bootloader. Partition 2 (ext3) - Ubuntu Linux 64 bit. Partition 3 (fat32) - contains data. What would be the best way to enable this drive to boot under Mac OS X? And if refit has to be used, could I simply have one more partition on the USB drive containing it? Thanks!

  Read the article

• Deploy Jetty as port 80 daemon on Linux

  - by McKAMEY

  I'm curious what techniques you Linux admin gods are using to manage your Jetty deployments. I come from a Windows Server background so I'm still getting used to all of this. I've been looking for a good solution for deploying Jetty instances as port 80 on a Linux installation. So far I've seen this thread which allows Jetty to run as a daemon: http://jira.codehaus.org/browse/JETTY-458 And I've seen this thread which talks about alternates for setting up on port 80: http://wiki.eclipse.org/Jetty/Howto/Port80 These all seemed kind of hacky. Surely there is a relatively standard way of deploying a web server like Jetty on Linux. I'm currently using CentOS 5.5 but open to other distros. Thanks in advance.

  Read the article

• Installing linux mint in one partition

  - by sha404

  So, I have a disk with a MBR setup(image below). I've managed to have 50 GB unallocated space for intalling Linux Mint 14. And I want to keep the current windows OS too(but don't want the Mint inside windows). Now I've seen in some tutorials that Linux Mint needs several partitions for bootloader, swap, & home. I don't like to have so many partitions & maybe MBR stuff won't let me create more than one now. So, is it possible to install Linux Mint in one partition only? If it is really impossible than what's the minimum number? & how can I accomplish that? Thanks in advance.

  Read the article

• Automatically distinguish difference between multiple HDDs in linux?

  - by Jakobud

  I'm running Ubuntu Server 9.10. I have two external USB HDDs. I use them each for different backup reasons. So certain data gets stored on one HDD, and different information gets stored on the other HDD. I want to make a script that can look at the external HDD can determine which HDD it is, so that it can copy the proper information to it. Is there a way for Linux to determine this? Like if I see one HDD as /dev/sdc1, then unplug it and plug in the other HDD, should Linux see it as /dev/sdd1 or will it be /dev/sdc1? I'm a bit of a Linux newb and I don't quite understand how it determines the /dev/sdxx values that it assigns to drives.

  Read the article

• iMac boot from linux partition on external drive

  - by user74757

  I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

  Read the article

• yum install gcc fails with invalid linux.dropbox.com/fedora directory

  - by john

  I am relatively new to Linux administration. I have installed Centos 6.5 (under VirtualBox on a Win7pro system). When I try to install gcc to the system using yum, I get the following results: [root@localhost etc]# yum clean all Loaded plugins: fastestmirror, refresh-packagekit, security Cleaning repos: Dropbox base extras updates Cleaning up Everything Cleaning up list of fastest mirrors [root@localhost etc]# yum install gcc Loaded plugins: fastestmirror, refresh-packagekit, security Determining fastest mirrors * base: mirrors.tummy.com * extras: mirrors.cat.pdx.edu * updates: centos.mirror.freedomvoice.com http://linux.dropbox.com/fedora/6/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found" Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: Dropbox. Please verify its path and try again It appears that the linux.dropbox.com/fedora/6 subdirectory does not exist. Does anyone have any ints/answers for me. Thanks.

  Read the article

• linux ftp server with virtual users

  - by kjertil

  i know there are already similar questions for this matter but the answers doesn't really make much sense to anyone who is not really technically comfortable in Linux. I've already tried articles like these for example: http://howto.gumph.org/content/setup-virtual-users-and-directories-in-vsftpd/ with the result of accidently breaking the whole system. The problem is that, while there are several technical possibilities to set up virtual users with a FTP server, it is not as easy as managing for instance a Filezilla server on Windows. I've seen some Web based GUI's but most of them seems to be out of date. The different flavours of Linux and the large amount of different popular FTP servers also seems to make the matter more complicated. I guess my question is, is there a way, to set up virtual FTP users on Linux without the hastle of having to manually edit PAM, MYSQL and config files?

  Read the article

• Linux Mint on VirtualBox has no internet connection

  - by Martin

  Physical machine: Mac Mini running OSX 10.7.5 Virtual machine: Linux Mint 15 Cinnamon 64-bit Using VirtualBox. I am trying to make the linux connect to the internet. For some reason I can access the host computer with 192.168.2.100. Its set up to show me a web-page that says "It works". This I can see from the linux. But I cannot reach anything on the internet. Either FireFox says "Unable to connect" or when I run nslookup google.com I get connection timed out; no servers could be reached. My setting on VirtualBox under the Network tab are: Bridge Adapter vnic0 promiscouos Mode:Allow All`. If it makes a difference, the host has a WiFi connection to the home router. What have I missed?

  Read the article

• linux: upload / download difference on network shares

  - by Batsu

  I have a Red Hat Enterprise Linux 6 (with SELinux) which shows significant differences of speed between download and upload (the latter significantly slower) of files shared over the LAN. The bottleneck seems to be the output of the linux machine since I have a rate around 1Mb/s when WinXP machines download files shared (using samba) by the RHEL machine uploading files from the RHEL to a WinXP's shared folder while uploading from the XP machines to linux's shares downloading XPs' shares on the RHEL any share between Windows machines only run smooth (around 50Mb/s). Since the upload from RHEL to WinXP's share is slowed too I would exclude an issue in the configuration of samba. What could possibly determine this limit in the upload speed? update: iptables doesn't show any output rule and disabling it doesn't show any noticeable difference, so I would rule out it too.

  Read the article

• How to disable ^C from being echoed on Linux on Ctrl-C

  - by pts

  When I press Ctrl-C in any pseudoterminal (xterm, gnome-terminal, rxvt, text console and SSH) in Karmic Koala, the string ^C gets echoed to the terminal in Ubuntu Karmic Koala. This hasn't happened in Ubuntu Jaunty Jackalope. I'd like to get rid of the extra ^C. Example: $ cat foo foo ^C $ _ I got the above by typing C, A, T, Enter, F, O, O, Enter, Ctrl-C. I want to get rid of the ^C, and get this for the same keypresses: $ cat foo foo $ _ I tried setting stty -echoctl, which created a single-character HT (or a box with Unicode 0003 in it) instead of the ^C. I want to see absolutely nothing when I press Ctrl-C. I'm using Linux linux 2.6.31-20-generic-pae #57-Ubuntu SMP Mon Feb 8 10:23:59 UTC 2010 i686 GNU/Linux

  Read the article

• Linux cannot see Windows 7 partitions on install

  - by Nash0

  I've been trying to install Linux as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Linux installers by boot from CD they see the entire hard drive as unallocated space. I have tried Ubuntu 10.10, Kbuntu 10.10 and Fedora 14 and they all have the same problem. I have also tried the Ubuntu "install in Windows" option and could not get it to work. EDIT: Booting Gparted 0.8.0 from a usb drive did not work. It reported the entire drive as unpartitioned.

  Read the article

• Linux QoS (Skype / BitTorent / SIP / HTTP priority)

  - by Andre

  We are configuring a linux box that will act as internet gateway for an office of 30-50 computers. We are using iptables/HTB for traffic shaping. Is there a way to match traffic on L7 level? It's easy to identify traffic by TCP/UDP ports (like SIP and HTTP). But what if we are dealing with Skype & BitTorent? It was surprise for me that there is no powerful and matured sulution for tasks like this. I found only l7-filter (http://l7-filter.clearfoundation.com/) patch for the Linux kernel, but it's no longer supported (it seems to). Moreover it couldn't be compiled with modern Linux kernels. The only option I found was to use a Cisco router. Are there other ways to identify and shape Skype and Bittorent traffic?

  Read the article

• LMDE detects a wireless card, but can't use it

  - by Davidos

  LMDE can see my wireless card, and correctly identifies it, but it refuses to let me turn it on through the shiny graphical interface. Is there a way to use the non-shiny terminal to turn on my wireless? One small tidbit I noticed was the stated version; it says the version is 00. I believe that's hexadecimal for 0, which may indicate something screwy with the software. It would be nice if someone could tell me how to figure out how to solve this kind of problem in the future. *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 00 serial: 91:e3:7b:0d:a3:a9 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-1-amd64 firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:e1d00000-e1d01fff I've tested multiple other network managers, and none of them work. W ireless switch is on, I'm sure it's a driver problem.

  Read the article

• Linux distro for acer 4741G laptop

  - by sandundhammikaperera

  Hi all, I need to install linux for my acer 4741 laptop. Anyone who did this before and managed to solve the device driver problems please share your experience with me. I already installed the backtrack linux and I able to make it work the both wireless and wired network connections and also the sound card is also working. But the problem is that I unable to configure 1360x768 resolution of the display. The display looking really flat and ugly under that linux. some help ? can you guide how to correctly configure the /etc/X11/xorg.conf ? --Thanks in advance--

  Read the article

• Hosting company that does Linux VPS and MS SQL

  - by danielmcq

  I'm looking for hosted solutions but there are so many companies that finding the right one using a Google search is a bit overwhelming. Ideally I would like a hosting company which has following options: -Linux VPSs - Individual VPSs should be fairly cheap since I plan on putting one or two services per VPS i.e web server on one (httpd and ColdFusion), an SVN server on another, etc. -Managed MS SQL databases - My company already has data in MS SQL databases and a lot of ColdFusion code written that has MS SQL specific commands in it. -Individually purchased dedicated IP addresses -Preferably located in the North America region My plan would be to setup one Linux VPS as a gateway/firewall/VPN server and have all of my traffic routed through so that my other servers would not use of bandwidth by talking to each other. The trick is also finding a company that does Linux VPS AND MS SQL databases. Does anybody know of any hosting companies offer what I'm looking for? Let me know if I need to add more details.

  Read the article

• Fresher in Linux administration [closed]

  - by user127452

  i am fresher in the administration field & i just got the job as a linux support executive,though i have basic knowledge of linux .. the server handling,configuring & network related issues are a new part for me.So i am confuse for where to start with the basic requirement that linux admin should know & how to & from where to study about it .. we hav a 6 working days for +9 hours each ..so it is not possible to join any RHCE course or classes .. so please help me regarding to this issue as the there was no proper handoff is done from previous employer ... & now there is a lot work pressure on me ... so please suggest me something ... :)

  Read the article

• Best Linux Distribution [closed]

  - by kamalbhai

  hi I am right now on Windows 7 alongwith a newly bought Dell Laptop .I want to install Linux too . I have been using Ubuntu 10.10 before . now I want to try a different flavour in Linux which has a good audio/video options & is security enhanced . Right now I have the following distributions : Ubuntu 10.10 OpenSuse 11.0 Fedora 13 . among the three mentioned above which might be the best to learn out things n get more close to linux .I am a student & eager to learn a lot of new things .... so which of the above would be the best for me ?

  Read the article

• Linux NIC Bonding Issue (CentOS 4 / RHEL 3)

  - by jinanwow

  I am having an issue with bonding NICs on CentOS 4. It appears the bonding driver does work, but it is stuck in round-robin mode and I am trying to get to active-backup. The current config is: ifcfg-bond0 DEVICE=bond0 IPADDR=192.168.204.18 NETMASK=255.255.255.0 ONBOOT=yes BOOTPROTO=none USERCTL=no TYPE=Bonding BONDING_OPTS="mode=1 miimon=100" ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet MASTER=bond0 SLAVE=yes ifcfg-eth3 DEVICE=eth3 ONBOOT=yes BOOTPROTO=none TYPE=Ethernet MASTER=bond0 SLAVE=yes cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v2.6.3-rh (June 8, 2005) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:17:a4:8f:94:b1 Slave Interface: eth3 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:1b:21:56:b8:69 cat /etc/modprobe.conf alias eth0 tg3 alias eth1 tg3 alias eth3 e1000 alias eth2 e1000 alias bond0 bonding options bond0 mode=1 miimon=100 I have tried moving the bonding information out of the ifcfg-bond0 into the modprobe configuration file. It seems that it is stuck in RR and I am trying to get it into the Active-backup (mode 1) state. Any ideas what would be causing this issue?

  Read the article

• Linux Mounting Problem

  - by Sam

  I have an Iomega Network Attached Storage device on my Windows network. I am trying to use a clonezilla live USB flash drive to backup my netbook to my Iomega Network Attached Storage device. The clonezilla USB flash drive runs linux. I'm having trouble getting the Network Attached Storage unit to mount using the following command: mount -t cifs -o username="myUsername" //192.168.1.100/backup /home/partimg The response from linux is: [134.730738] CIFS VFS: cifs_mount failed w/return code = -6 retrying with upper case share name [134.788461] CIFS VFS: cifs_mount failed w/return code = -6 mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I also tried adding the following to my username: username="myUsername,domain=workgroup" but that did not change the error. I am able to ping the network attached storage unit from linux on my netbook. I also booted from a Slax Live USB Flash Drive and Slax auto-mounted my network attached storage unit via Samba. Unfortunately, I don't believe that I can run clonezilla from inside the Slax installation. Does anyone have any insight about what is wrong with my mount statement? Or is there something peculiar about Iomega drives which makes this impossible?

  Read the article

• Wired to wireless bridge in Linux

  - by adrianmcmenamin

  I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

  Read the article

• Reusing slot numbers in Linux software RAID arrays

  - by thkala

  When a hard disk drive in one of my Linux machines failed, I took the opportunity to migrate from RAID5 to a 6-disk software RAID6 array. At the time of the migration I did not have all 6 drives - more specifically the fourth and fifth (slots 3 and 4) drives were already in use in the originating array, so I created the RAID6 array with a couple of missing devices. I now need to add those drives in those empty slots. Using mdadm --add does result in a proper RAID6 configuration, with one glitch - the new drives are placed in new slots, which results in this /proc/mdstat snippet: ... md0 : active raid6 sde1[7] sdd1[6] sda1[0] sdf1[5] sdc1[2] sdb1[1] 25185536 blocks super 1.0 level 6, 64k chunk, algorithm 2 [6/6] [UUUUUU] ... mdadm -E verifies that the actual slot numbers in the device superblocks are correct, yet the numbers shown in /proc/mdstat are still weird. I would like to fix this glitch, both to satisfy my inner perfectionist and to avoid any potential sources of future confusion in a crisis. Is there a way to specify which slot a new device should occupy in a RAID array? UPDATE: I have verified that the slot number persists in the component device superblock. For the version 1.0 superblocks that I am using that would be the dev_number field as defined in include/linux/raid/md_p.h of the Linux kernel source. I am now considering direct modification of said field to change the slot number - I don't suppose there is some standard way to manipulate the RAID superblock?

  Read the article

• Using multiple USB webcams in Linux

  - by rachelderp

  Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

  Read the article

• Are drivers compatible between different Linux distributions?

  - by Dimitri C.

  If you have a device driver that works on one Linux distro, will it also work on another one?

  Read the article

• diagnostic multicast issue using wireshark

  - by Abruzzo Forte e Gentile

  I have a network that is setup for multicast traffic. My setup is the following -Machine A : a server generates multicast traffic. -Machine A : few clients subscribing to that multicast traffic -Machine B : few clients subscribing to that multicast traffic # Address I am using IP : 239.193.0.21 PORT: 20401 The clients in machine A , even if they join the group (I can see IGMP messages through wireshark), don't receive any data while (and this is the funny part) machine B,C and D receive everything. I sorted that issue by completely disabling Linux firewall. Before doing that, I enabled the multicast on the firwall ('reject all'). iptables -A INPUT -m addrtype --src-type MULTICAST -j ACCEPT My question is the following: what I can check in wireshark that can help me in spot such firewall issues in the futures? For TCP/IP I realize by using ping and looking at ICMP packets rejected. What I can check/monitor for multicast? I am using LInux/Red-Hat Enterprise 6.2

  Read the article

< Previous Page | 34 35 36 37 38 39 40 41 42 43 44 45  | Next Page >