Search Results

Search found 17856 results on 715 pages for 'setup py'.

Page 380/715 | < Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >

  • Problems with login scripts on Terminal Server 2008

    - by discovery
    We are having issues with login scripts not running on Windows 2008 Terminal Server. This is a brand new implementation and they have never worked. The test user in question doesn't have any problems running login scripts on their workstation. I have tried logging into the server directly with their account, but still no scripts run. I have setup a test account with Domain Admins rights in the same OU as theirs and the scripts don't run. I can manually run the scripts from the SYSVOL\somedomain.com\Policies folder and they run fine. The Terminal 2008 Server is in a mixed 2003/2008 domain. The user can run the gpupdate on the server without error. I have also run the Group Policy Results for this user and the terminal server and everything looks good, no errors. Any suggestions?

    Read the article

  • Rackspace Cloud Servers in Europe?

    - by mit
    We have setup a cloud virtual server at rackspace in the US, but we use it from Europe. I found out I am not quite happy with the response time. Of course I knew that there would be some latency. But I am not sure if it is the overseas latency (ping is 120ms) or also the minimal resources. It is the smallest machine, 256 MB, 10 GB, running a Mediawiki on Ubuntu 10.04 64 bit. The Instance lives in the rackspace ORD1 datacenter. As soon as they have opened their new facilities in the UK we plan moving the incstance there. But we are planing more machines already. The pricing is quite attractive. I don't really want to do some measuring and benchmarking and this stuff, so I am asking just for your opinions and it would be nice to hear what you can tell from your experience. Maybe someone who uses such small instances in the US. And what can we really expect if we upgrade to more resources.

    Read the article

  • Solaris 11 pkg fix is my new friend

    - by user12611829
    While putting together some examples of the Solaris 11 Automated Installer (AI), I managed to really mess up my system, to the point where AI was completely unusable. This was my fault as a combination of unfortunate incidents left some remnants that were causing problems, so I tried to clean things up. Unsuccessfully. Perhaps that was a bad idea (OK, it was a terrible idea), but this is Solaris 11 and there are a few more tricks in the sysadmin toolbox. Here's what I did. # rm -rf /install/* # rm -rf /var/ai # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 So far so good. Then comes an oops..... setup-service[168]: cd: /var/ai//service/.conf-templ: [No such file or directory] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is where you generally say a few things to yourself, and then promise to quit deleting configuration files and directories when you don't know what you are doing. Then you recall that the new Solaris 11 packaging system has some ability to correct common mistakes (like the one I just made). Let's give it a try. # pkg fix installadm Verifying: pkg://solaris/install/installadm ERROR dir: var/ai Group: 'root (0)' should be 'sys (3)' dir: var/ai/ai-webserver Missing: directory does not exist dir: var/ai/ai-webserver/compatibility-configuration Missing: directory does not exist dir: var/ai/ai-webserver/conf.d Missing: directory does not exist dir: var/ai/image-server Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/cgi-bin Missing: directory does not exist dir: var/ai/image-server/images Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/logs Missing: directory does not exist dir: var/ai/profile Missing: directory does not exist dir: var/ai/service Group: 'root (0)' should be 'sys (3)' dir: var/ai/service/.conf-templ Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_data Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_files Missing: directory does not exist file: var/ai/ai-webserver/ai-httpd-templ.conf Missing: regular file does not exist file: var/ai/service/.conf-templ/AI.db Missing: regular file does not exist file: var/ai/image-server/cgi-bin/cgi_get_manifest.py Missing: regular file does not exist Created ZFS snapshot: 2012-12-11-21:09:53 Repairing: pkg://solaris/install/installadm Creating Plan (Evaluating mediators): | DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 3/3 0.0/0.0 0B/s PHASE ITEMS Updating modified actions 16/16 Updating image state Done Creating fast lookup database Done In just a few moments, IPS found the missing files and incorrect ownerships/permissions. Instead of reinstalling the system, or falling back to an earlier Live Upgrade boot environment, I was able to create my AI services and now all is well. # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 Refreshing install services Warning: mDNS registry of service solaris11-x86 could not be verified. Creating default-i386 alias Setting the default PXE bootfile(s) in the local DHCP configuration to: bios clients (arch 00:00): default-i386/boot/grub/pxegrub Refreshing install services Warning: mDNS registry of service default-i386 could not be verified. # installadm create-service -n solaris11u1-x86 --imagepath /install/solaris11u1-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 514/514 292.3/292.3 0B/s PHASE ITEMS Installing new actions 661/661 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11u1-x86 Image path: /install/solaris11u1-x86 Refreshing install services Warning: mDNS registry of service solaris11u1-x86 could not be verified. # installadm list Service Name Alias Of Status Arch Image Path ------------ -------- ------ ---- ---------- default-i386 solaris11-x86 on i386 /install/solaris11-x86 solaris11-x86 - on i386 /install/solaris11-x86 solaris11u1-x86 - on i386 /install/solaris11u1-x86 This is way way better than pkgchk -f in Solaris 10. I'm really beginning to like this new IPS packaging system.

    Read the article

  • 14 WordPress Photo Blog & Portfolio Themes

    - by Aditi
    The best thing you can do to preserve your memories is to capture them. Photographs can help you relive all those sweet moments you had with your special someone or the ones closest to you. With the sudden explosion in the number of blogs on blogosphere it was quite obvious that many bloggers would like to share their most cherished memories on their blog. We saw blogs full of images along with the intricate details and now we are presenting you some WordPress themes to help you showcase your photography or make a photo blog so that you can share those small delights you captured with your special ones, no matter where they are. These WordPress photo blog themes are not just limited for personal use as some of them have been designed especially for professional use. Graphix Price: $69 Single & $149 Developer Package | DownLoad DeepFocus Price: $39 Package | DownLoad ReCapture Price: $50 or $75 Package | DownLoad PhotoGraphic Price: $50 or $75 Package | DownLoad PhotoLand Price: $39 Single & $99 Developer Package | DownLoad SimplePress Perfect Theme for showcasing your Portfolio, very simple & easy to navigate. Lots of Features. Price: $39 Single & $99 Developer Package | DownLoad ePhoto Price: $39 Single & $99 Developer Package | DownLoad Outline Price: $50 or $75 Package | DownLoad Gallery The theme features a simple options panel for easy setup, automatic resizing & cropping for thumbnails, and 5 colour styles. Price: $49 | DownLoad eGallery eGallery is one of the best theme to showcase your images. It has some features which you don’t see in any other themes of this kind. It’s particularly nice if you want to encourage social interaction as readers can rate and comment on your images. It is compatible with all major web browsers. Price: $39 | DownLoad Photoblog Price: $49 | DownLoad Ultra Web Studio Price: $30 | DownLoad Showtime Ultimate WordPress Theme for you to create your web portfolio, 3 different styles. Price: $40 | DownLoad Boomerang Price: $35 | DownLoad Related posts:6 PhotoBlog Portfolio WordPress Themes Wootube WordPress Video Blog Theme 7 Portfolio WordPress Themes

    Read the article

  • Slow network file access with VMWare Server and Windows 7

    - by garethm
    I have Windows 7 32-bit virtual machine running in a VMWare Server virtual machine. The host is Windows 7 64-bit. When I copy files between them it is extremely slow - it will take several minutes to copy even a 1 MB file. I can upload the file to an website and then download it again almost instantaneously by comparison. Browsing the network is quite zippy and has no problems. I have been unable to set up a HomeGroup between the computers though - the guest always times out without managing to get setup. Any ideas on how I should go about tracking down where the problem is?

    Read the article

  • Dilemma for growing a project: Open source volunteer developers VS closed source paid / revshare developers? [closed]

    - by giorgio79
    I am trying to grow my project, and I am vaccillating between some examples. Some options seem to be: 1. open sourcing the project to draw volunteer developers. Pros This would mean anyone can try and make some money off the code that would motivate them to contribute back and grow the project. Cons Existing bigger could easily copy and paste my work so far. They can also replicate without having access to the code, but that would take more time. I also thought of using AGPL license, but again, code can still be copied without redistribution. After all, enforcing a license costs a lot of money, and I cannot just say to a possible copycat that it seems you copied my code, show me what you got. 2. Keep the project closed source, but create some kind of a developer program where they get revshare Pros I keep the main rights for the project, but still generate interest by creating a developer program. Noone can copy code easily, just with some considerable effort, but make contributions easy as a breeze. I am also seeing many companies just open source a part of their projects, like Acquia does not open source its multisite setup, or github does not open source some of its core business. Cons Less attention from open source committed devs. Conclusion So option 2 seems the most secure, but would love some feedback.

    Read the article

  • Static IPv6 address advertising and IPv6 autoconfig in Debian/Ubuntu

    - by Pascal
    I have a network that advertises IPv6 addresses through IPv6 autoconfig. To allow DNS lookups and to have fancy IP addresses, we setup "static" IPv6 addresses through /etc/network/interfaces: auto eth0 iface eth0 inet dhcp iface eth0 inet6 static address a:b:c:d:e::f netmask 64 Whenever we now connect through IPv6 Linux uses the IPv6 autoconfig address: a:b:c:d:21d:60ff:fe4a:479 and not the static IPv6 address: a:b:c:d:e::f A server on the other side only sees the autoconfig address. Is there a way to force linux (Debian/Ubuntu) to use the static address for outgoing packets? This is especially interesting for reverse DNS and firewall settings. I don't want to disable the IPv6 autoconfig since I don't have control over the settings the router advertises.

    Read the article

  • Components needed for VPN

    - by Anriëtte Combrink
    Hi there We eventually got our Mac Mini Server. We now want to set up a small Remote Access VPN using this Mac Mini Server. Firstly we are not sure of the components needed additionally to the server to setup this VPN. We currently have the following: 1 Mac Mini Server 1 Firewall Router (Billion 802.11g ADSL2+ router with VPN capabilities [it says so on the box]) 4Mbps ADSL connection (which should have VPN capability enabled by the service provider, or so we heard) We are not sure what else needs to be included to enable our small VPN. Any advice would be really helpful.

    Read the article

  • Live noise-filter on line-in

    - by Damon Gant
    I'm running the following setup: Xbox 360 is hooked up to my (PC) screen via HDMI/DVI converter. Because the Xbox has no dedicated sound output, except for optical S/PIDF, I'm also using the AV/RCA output, namely just the audio, which is connected to an old stereo, which is then connected to my PCs line-in. I'm now experiencing a some of noise. I'm using one of the standard "Realtek High Definition Audio" cards, which doesn't seem to offer this kind of functionality. Is there a software that will playback audio right off a device while running filters on it? It doesn't have to create a device on its own, I just want to listen to it. Here's a sample: http://puu.sh/1suY6

    Read the article

  • phpmyadmin on lighttpd gives me a "403 - Forbidden", need help.

    - by JamesM-SiteGen
    Whats the problem: When I goto //localhost/phpmyadmin I get what I would get if I did //localhost/, I'm using both http: and https:. What did I do, that changed it: I simply reinstalled lighttpd. What I have tried: Disabling and re-enabling 50-phpmyadmin.conf, Now I get a "403 - Forbidden" instead. When I goto /phpmyadmin/setup it asks me for a login, Not a clue what it is. Now I'm waiting for someone to help. :) Thanks to anyone with any answers. Latest Status: Not working, giving me a "403 - Forbidden".

    Read the article

  • WHM new account nameservers not responding

    - by Jae Kun Choi
    I've setup a new account in WHM and updated the nameservers from Domain Registrar and it's not responding from the server. So I went to DNS functions and Nameserver IP's and I have the following ns1.example.com.au No IP 4 ns2.example.com.au No IP 4 I'm not sure whether "NO IP" part is the problem I went in to the domains and they seem to be properly set up. Below is what my Domain Registrar responded with my ticket. those nameservers are either a) offline/not responding or b) not set up correctly as nameservers. Is there a place I can check in WHM to make nameservers respond correctly? The nameservers I updated with above ns1.example.com.au and ns2.example.com.au but it's not working. WHM version is: WHM 11.32.2 (build 18)

    Read the article

  • HP DL160 vs DL360 for virtualization

    - by Chris
    Hi, We're planning to consolidate our infrastructure (a dozen servers). We'll buy two or three identical new servers who will be setup as a XenServer pool. Load balancing and HA tools will monitor the pool and vMotion VMs in case of failure/overload. I know that the DL100 series of HP servers is cheaper than the DL300 serie (in every sense of the word). As we don't need local storage (we have a SAN) and can live with a temporary down server (provided that Xen Server HA tools work as advertized), what are the downsides going with the DL100 serie ? Thanks, Chris

    Read the article

  • Wireless Access Point - Can't ping other machines on the wireless network

    - by Surfer513
    I have a wireless access point (Netgear), and I have it setup so that it has an IP address in the current subnet (let's say 192.168.2.0, subnet mask of 255.255.255.0). The machine that it is connected to via ethernet cable has an IP in the same subnet as the AP. The machines that are connected to the AP via the wireless connection also have an IP address in the same subnet as the rest of the network (192.168.2.0). All machines can ping the access point, but they cannot ping each other. I don't totally understand why, because there is connection and all of the machines are in the same subnet. I realize this is a layer 3 device, but is there an issue because of this AP's lack of gateway capabilities? (i.e. no routing table, etc.)

    Read the article

  • Desktop Fun: Music Icon Packs

    - by Asian Angel
    If you really love music and want to liven up your desktop then get ready to create a desktop concert with our Music Icon Packs collection. Note: To customize the icon setup on your Windows 7 & Vista systems see our article here. Using Windows XP? We have you covered here. Sneak Preview For our desktop example we decided to go with a touch of anime musical fun. The icons used are from the Guitar Icons set shown below. Note: Wallpaper can be found here. An up close look at the icons that we used… Notes icon set 1 *.png format only Download Notes icon set 2 *.png format only Download Notes icon set 3 *.png format only Download Notes icon set 4 *.png format only Download Big Band Set 1 *.ico format only Download Big Band Set 2 *.ico format only Download Acoustic Guitars *.ico and .png format Download Acoustic Guitar *.ico format only Download Guitar Icons *.ico format only Download Guiter Skulll *.ico format only Download Dented Music *.ico format only Download Music Icons *.ico format only Download Ipod Mini *.ico format only Download MP3 Players Icons *.ico format only Download MusicPhones icon *.ico and .png format Download Wanting more great icon sets to look through? Be certain to visit our Desktop Fun section for more icon goodness! Similar Articles Productive Geek Tips Desktop Fun: Video Game Icon PacksDesktop Fun: Sci-Fi Icons Packs Series 2Why Did Windows Vista’s Music Folder Icon Turn Yellow?Restore Missing Desktop Icons in Windows 7 or VistaAdd Home Directory Icon to the Desktop in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Download Songs From MySpace Steve Jobs’ iPhone 4 Keynote Video Watch World Cup Online On These Sites Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online

    Read the article

  • Installing Windows Server 2003 on AMD environment

    - by santhosh kumar
    Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

    Read the article

  • Google Analytics setting cookies on static content despite being on entirely separate domain

    - by Donald Jenkins
    I recently decided to comply with the YSlow recommendation that static content is hosted on a cookieless domain. As I already use the root of my domain (donaldjenkins.com) to host my website—on which Google Analytics sets a few cookies—that meant I had to move the CNAME URL for the CDN serving the static files from cdn.donaldjenkins.com to an entirely separate, dedicated domain. I purchased cdn.dj (yes, it's a real Djibouti domain name), hosted the files on the root (which contains nothing else, other than a robots.txt file) and set a CNAME of e.cdn.dj for the CDN. This setup works, but I was rather surprised to find that YSlow was still flagging the static files for not being cookie-free: here's a screenshot: The cdn.djdomain was new, and was never used for anything other than hosting these static files. Running httpfox on the site shows the _utma and _utmz Google Analytics cookies are being set on the static files listed above—despite their being hosted on an entirely separate, dedicated domain. Here's my Google Analytics code: //Google Analytics tracking code var _gaq=[['_setAccount','UA-5245947-5'],['_trackPageview']]; (function(d,t){var g=d.createElement(t),s=d.getElementsByTagName(t)[0]; g.src=('https:'==location.protocol?'//ssl':'//www')+'.google-analytics.com/ga.js'; s.parentNode.insertBefore(g,s)}(document,'script')); // [END] Google Analytics tracking code I'm not obsessing about this issue—I know it's not really affecting server performance—but I'd like to just understand what is causing it not to go away...

    Read the article

  • Bulgogi to Beignets

    - by Randy Walker
    While it’s still a full month away, I’m getting super excited about my upcoming trips. May and June are chock full of events, two of which I’ll have full announcements for within the week.  In mid May I’ll be driving to Dallas to take my 2nd trip to Korea (the bulgogi part).  Seeing a bunch of old friends from my first trip as well as taking a week for some deeper personal things. While in my absence, June 1st-4th, I’ve setup a tour across Arkansas and Texas for two Microsoft employees who work on the Visual Studio & Visual Basic team to talk at various user groups and companies.  Look for my announcement within the next couple of days. As soon as I get back from Korea, I’m off to New Orleans!  It’s been years since I’ve been there (pre-Katrina), and I have a hankering for some Beignets and Cafe Ole from Cafe Du Monde.  The big news?  I’m hosting a PARTY on Bourbon Street!  The party will be very exclusive, featuring a crawfish and shrimp boil, various Cajun dishes, and an open bar.  Huge thanks to Infragistics for putting up the initial sponsor money.  See you guys at Microsoft’s TechEd 2010!

    Read the article

  • NX Client running on OS X 10.6.3 => NX Server Ubuntu 10.04: weird keymapping issue

    - by Mike D
    I have been using Ubuntu 9.10 at work after switching from vista. After being (expectedly) disappointed with performance over VNC (via VPN) when logging in from home, I came across the NOMACHINE suite. Last week, I upgraded from OS X 10.6.2 = 10.6.3 at home. After that, I also updated my NX Client at home to the latest version, as there were issues with recent changes in the OSX X11 setup that rendered the NX connection useless. At that point, everything worked fine. Fast forward, I upgraded from 9.10 = 10.04 on my work machine the next day, and after coming home and trying to log-in remotely, I noticed that the "s" and "m" keys, when pressed locally, acted as if the meta key was being pressed on the remote machine. That is, the "s" key opens in the Ubuntu login menu (the power icon), and the "m" key opens the messaging menu. I found some info on using xmodmap to remap keys, however, I can't even begin to fathom what keys I could remap to solve this issue. Any ideas?

    Read the article

  • Setting up a wireless access point with Ubuntu server

    - by Solignis
    I am trying to setup a wifi access point with my Ubuntu server, everything "seems" to be good since I got a better wifi radio (long story). But now I am a little confused, when my Android phone tries to associate with the AP it is able to with no problem but then it cannot get an IP address from my DHCP server. I have tried messing with firewall rules, nothing... I tried making a bridge interface as per what I am told I had to do. ( Not sure if i did it right though). What I am trying to do if make the wireless interface an extention of my eth0 network. Am I on the right track or am I going about the wrong way?

    Read the article

  • Turn off the Linux OOM killer by default?

    - by Peter Eisentraut
    The OOM killer on Linux wreaks havoc with various applications every so often, and it appears that not much is really done on the kernel development side to improve this. Would it not be better, as a best practice when setting up a new server, to reverse the default on the memory overcommitting, that is, turn it off (vm.overcommit_memory=2) unless you know you want it on for your particular use? And what would those use cases be where you know you want the overcommitting on? As a bonus, since the behavior in case of vm.overcommit_memory=2 depends on vm.overcommit_ratio and swap space, what would be a good rule of thumb for sizing the latter two so that this whole setup keeps working reasonably?

    Read the article

  • Anonymous user permission issue in SharePoint Server

    - by George2
    Hello everyone, I am using SharePoint Server 2007 x64 and Windows Server 2008 x64. I have setup a site with template publishing portal. I have grant anonymous access to all the site. My question is, if I create a new page, how to grant permission to anonymous user to access (read permission) the page? I got this confusion because, for the permission setting of a page, a permission is set according to a user name (e.g. read permission for user "foo" of a page). Since anonymous user does not have a related "user name", how could I grant read permission to anonymous user? BTW: I use Windows Forms authentication and Windows NTLM authentication for my sites. Thanks in advance, George

    Read the article

  • Sql 2008 r2 DEV install failed

    - by obulay
    I am trying to install Sql 2008 r2 DEVeloper on Windows 2008 STD. It previously had Sql 2008 Enterprise installed. I first uninstalled SQL 2008. I think uninstall still leaves some crap in registery, and in Program files. Installation fails in the last step of the process - installation, about couple of minutes into it. Can't insert picture for you because serverfault does not allow me to do so. But it basically it: Error message: "Installation failed" I re-installed SQL 2008 Enterprise on this box and we are not going to go to R2 on older servers that previously had SQL 2005 or SQL 2008 on it. Looking at Windows log: Activation context generation failed for "C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x64\Microsoft.SqlServer.Configuration.SqlServer_ConfigExtension.dll". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4027" could not be found. Please use sxstrace.exe for detailed diagnosis.

    Read the article

  • SharePoint 2010 Server Configuration Error -> "Cannot connect to database master"

    - by Chrish Riis
    I recieve the following error when I try to configure SharePoint 2010 Server: "Cannot connect to the database master at SQL server at [computer.domain]. The database might not exist, or the current user does not have permission to connect to it." I run the following setup: Windows Server 2008 R2 Standard with SP1 and all the updates SQL Server 2008 R2 with SP1 SharePoint Server 2010 with SP1 Everything is installed on the same server (it's a testserver) I have tried the following: Rebooting the server Checking the install account's DB rights (dbcreator, securityadmin - I even let it have sysadmin) Opened up the firewall on port 1433 and 1434 Uninstalled both SQL and SP, then reinstalled the both Enabled all client protocols in SQL Server Configuration Made sure I used the correct account for installing SharePoint (local admin) Useful links: TCP/IP settings – http:// blog.vanmeeuwen-online.nl/2010/10/cannot-connect-to-database-master-at.html http:// ybbest.wordpress.com/2011/04/22/cannot-connect-to-database-master-at-sql-server-at-sql2008r2/ Wrong slash - http:// yakimadev.com/2010/11/cannot-connect-to-database-master-at-sql-server-at-serverdbname-error-during-sharepoint-2010-products-configuration-wizard-and-installation/ Port error - http:// www.knowsharepoint.com/2011/08/error-connecting-to-database-server.html

    Read the article

  • How To Temporarily Disable The Touch Screen In X1 Carbon

    - by Daniel Cazzulino
    I know, why would anyone want to do that? Scott properly predicted: Don't knock a touchscreen until you've used one. Every laptop should (and will) have a touch screen in a year. Mark my words. And surely, less than a year later, the X1 Carbon (an amazing ultrabook for sure) has a touch model. And as of today, the price difference for the touch screen is a ridiculous $30 (actually $24 with a “back to school” coupon right now ;)): So why would you NOT get it? I know for some it works great. Now, let’s get real about touch *for a developer* for a minute. About 99.9% of my time in front of my laptop I’m either using Visual Studio or Chrome. I have my hands on the keyboard ALL THE TIME. I use the trackpoint ALL THE TIME. If I want to scroll, I only have to slightly move my fingers. I don’t click around much on pages: I READ them. So, in a few months of using the X1, I think I touched the screen like 10 times, and it was mostly to clear dust, which drives whatever app is in focus crazy. Plus, at home I have this simple setup:...Read full article

    Read the article

  • Postfix - How to alias some [email protected] to another user, but only for certain values of "host.com"

    - by Rory McCann
    I have a Postfix email setup. It's handle a few domains (i.e. I have them in my mynetworks in my main.cf). I have a normal unix account and use that to log in, and get my mail. My personal email account is of the form [email protected]. I have a new domain new.com, and I want to forward [email protected] to [email protected], however I don't want to forward [email protected]. Someone has suggested just forwarding all 'info' to 'user', and then using procmail on my user@ account to remove the [email protected] The server is Ubuntu.

    Read the article

< Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >