Search Results

Search found 17013 results on 681 pages for 'hard coding'.

Page 398/681 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

  • Debian date jumping, causing complete lockup

    - by artfulrobot
    I have a Debian Squeeze VM that has suddenly chosen to jump it's date forwards just over a month, which seems to confuse it no end and cause it to require a hard reset (yikes!). There is nothing unusual in the logs, except that the datestamp suddenly jumps (today back to 2005). It's happened three times, so I don't think it's to do with the leap second issue as the last one of those was in July. When it happened once I spent ages checking stuff but could not find anything, decided to forget it. But three times is becoming an issue on a production server. Edits providing information requested in comments (thanks!): I do not have control over the hypervisor, it is a hired VM. # cat /sys/devices/system/clocksource/clocksource0/current_clocksource kvm-clock # ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== +grendel.exizten 130.149.17.8 2 u 29 64 77 14.811 1.778 1.744 *panoramix.linoc 193.67.79.202 2 u 32 64 77 19.729 -0.419 1.691 +robert.elnounch 213.251.128.249 2 u 27 64 77 17.762 0.600 1.722 -janetzki.eu 83.169.43.165 3 u 31 64 77 27.214 3.575 1.638

    Read the article

  • How to back up a network volume to my Time Capsule?

    - by Mike
    I have a Time Capsule that I'm using for my backups. I have a network volume (coincidentally on the same time capsule) that I'd like to back up as well. How can I tell Time Machine to back up network volumes in addition to my main laptop hard drive? PS: yes, I know this setup isn't ideal. It'll incur 2x network overhead when backing up the network volume, plus my data won't be safe in the event of a drive failure since both copies will be on the same disk. However, it will give me some small amount of safety in the event I accidentally delete files on the network volume, among other things.

    Read the article

  • CentOS - dual boot from new partition

    - by Dima
    I need to install two copies of the CentOS 5.5 (bank A and bank B) on different partitions of the same hard disk and install grub boot loader to another partition (visible from both banks). The boot loader should redirect the boot menu to bank A or bank B (according to the configuration). The new partition is mounted to /common_partition and grub is installed on it using following command: grub-install /dev/hda In the new partition I'm created the following menu.lst file: title BOOTCONTROL REDIRECT : PLEASE WAIT root (hd0,1) configfile /boot/menu.lst boot On my setup: both partitions (bank A and bank B) are primary and grub is installed on MBR. The problem is: but the new boot loader (on common_partition) did not load. What wrong on my configuration?

    Read the article

  • Click sound from computer when shut down

    - by user32569
    Hi, I build my new computer yesterday and I noticed, when computer is shut down, I mean the exact time its looses power from PSU, relativelly loud CLICK sound occurs. Please does anyone knows from where? I think MB, SSD, VGA, CPU nor coolers are not cousing this. I would guess maybe Samsung 1TB HDD (maybe when heads go back to LZ) or some hard safety switch or relay in PSU? Or just the MB speaker? (Yes, its actually installed). Do you have any experience with this? Thanks.

    Read the article

  • Is Dell's server software bundle necessary? (Poweredge 2950 in my case)

    - by bwerks
    Hi all, Dell includes a fair amount of software with its servers, but I'm having a hard time determining from the documentation what each of them does, and whether or not I should install it. Dell's support site (unless I'm doing it wrong) seems fairly opaque to me and its offerings fairly unstandardized in terms of their usage, so if possible I'd like to stray away from them. Specifically, I'm curious if any of the features offered are duplicated in something like Microsoft System Center. For additional background information, I'm working with a Poweredge 2950 that was just rebuilt with an expanded raid-6, but initially I just installed Server 2008 R2 directly instead of using the Build and Update utility. There's nothing of use on it at the moment so I'm totally open to wiping it again.

    Read the article

  • Using symbolic links with git

    - by Alfredo Palhares
    I used to have my system configuration files all in one directory for better management but now i need to use some version control on it. But the problem is that git doesn't understand symbolic links that point to outside of the repository, and i can't invert the role ( having the real files on the repository and the symbolic links on their proper path ) since some files are read before the kernel loads. I think that I can use unison to sync the files in the repo and and the their paths, but it's just not practical. And hard links will probably be broken. Any idea ?

    Read the article

  • Debian Harddrive Fdisk - Same ID's and changing letters

    - by James Willson
    I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

    Read the article

  • Wireless technology - which is better: more single radio APs or less dual radio APs?

    - by gert_78
    We are currently talking to vendors of wireless solutions for a wireless deployment in a university campus with some 5000 students. One vendor is offering us a Cisco solution with a WLC 5508 controller and 69 2x2 MIMO Dual-band/Dual radio APs (Aironet AP 1042 model) The other vendor is offering us an Aruba solution with a 3600 controller and 96 2x2 MIMO dual band BUT single radio APs (Aruba AP93) Both vendors are charging 82.000 US$ (support, 3y service contracts, switches and additional required options all included of course) The Aruba vendor is trying to convince me that 96 single radio APs will give us more connection/users/capacity then the 69 dual radio APs. I have my doubts about that and since it is my core competence-domain I wanted to ask here the opinion of people that have a more profound knowledge and experience in this area. When you talk to vendors it's often hard to get objective information. So try to answer only if you are sure and please mention it if you are affiliated with one of the vendors. I appreciate all useful help and want to thank you in advance for the effort!

    Read the article

  • Where do I connect the two red SATA cables on my motherboard?

    - by Dennis Smith
    I have a Compaq Presario PC SR5110NX. The Processor is AMD Athlon 64 3800+. It has 512 MB of RAM and a 40GB Hard Drive. I'm running Windows XP Professional on it. I have 2 SATA drives, one is black and the other is white. I have 2 red little cables, and they have the letters and numbers on them. On one side of the cable it says "HP P/N:5188-2897 0720". My motherboard is a MCP61PM-HM Rev 1.0B. Where do I connect the two SATA connectors?

    Read the article

  • GRUB Error after Deleting Linux Partition

    - by Nironan12
    I was dual-booting with Windows 7 and Windows Vista each taking up half of my hard drive. In Windows 7 I used Easeus Partition Manager to shrink my Windows 7 volume 8GB. On the unallocated space, I installed Linux Mint 8 RC1. After a little bit of playing around with it, I booted in Windows 7, used EPM again and deleted the 8GB Linux partition. I then extended Windows 7 on the 8GB. After restarting my computer, all I get is a black screen and this: GRUB loading. error: no such partition grub rescue> I do not have a Windows 7 disk nor does my computer come with Startup Repair. What do I do?

    Read the article

  • Computer is really slow

    - by joshhunt
    I'm not exactly sure when exactly it started happening, but my computer now is extremely slow. Originally, I have been using this computer for all sorts of stuff: Photoshop, web design/development, movies and even some light (Warcraft 3) gaming. I have been running it with Windows XP But now it is very, very slow, and I don't know how, why or when this happened. After I noticed the slowness, I removed Windows XP and installed Windows 7 on it, but it is still very slow. Now watching videos is unbearable at full screen (slow frame rates, audio out of sync) and painful when made smaller. Why would this happen? What would cause this? I am starting to think it is a hardware problem (the CPU has died or something), but I don't even know if that is possible. The PC is running with 1GB of RAM, three hard drives (all up, something like 400 GB) and I think a 1.6GHz processor

    Read the article

  • Installing win xp media center 2005

    - by wdizz
    I have a Dell 710 XPS H2C running Vista Business, I wish to clean install Win XP media center 2005. I wiped my hard drive with Wipe Drive Pro and proceeded to install Win XP, the install starts and goes thru the various prompts but when it comes to 'installing windows' I get a blue screen that flashes briefly (to fast to get the error code) and then reboots. This happens with any XP system disk (iv'e tried 4), but it installs Vista, 7 or Linux with no problems. I contacted Dell Support who have yet to give me any solutions to resolve the problem. Is there anyone out there with any ideas please.

    Read the article

  • Recommended Setup

    - by Chris Ryan
    I have been running into issue with my MSSQL Database setup with speed. Here is my scenario. About 100M Rows Average: 1k Updates Per Second Hard Drives: RAID 10 SSD MDF --Active Time: 0 Log Drives: 1 SSD LDF - Simple Recovery --Active Time 99.9 --Queue: 8 I do not need a back up of the log so it is set to simple recovery but my bottleneck is still at my log. I get high WAITLOG times and thus it can not update any faster. I can't do bulk updates/transactions and each update needs to be one at a time. Is my only option to increase write performance of the log drives, add a RAID drives? Any suggestions on increasing the performance?

    Read the article

  • OEM Office 2010 without media - how to reinstall?

    - by Bryan
    I have recently purchased a new office desktop PC from Dell with OEM version of Windows 7 Pro and Office 2010 Pro. One of the reasons I always use Dell is that they always supply installation media CDs or DVDs, unlike some other companies that just give you ISO images on the hard disk that you have to burn yourself. This is the first PC I have purchased with Office 2010 Pro (OEM), and I was disappointed to see that Dell don't ship out any installation media for office 2010, they just supply a piece of card with the office pro product key printed on it. If the HDD fails completely and I have to perform a clean installation, how can I re-install office? Can I download the trial version of Office 2010 and install that, then offer it my product key? Bearing in mind that the product key is an OEM product, not a retail product, would this work?

    Read the article

  • Can't access DD-WRT set in DHCP forwarder

    - by Chris Marisic
    This might sound amazingly stupid but I have a DD-WRT (micro) router that I placed in my network to act as a switch and as a WAP while relying on my cable modem to be the DHCP server. In my attempts to get the configuration right I put the router into DHCP forwarder which then made everything work correctly. The problem is now I can't seem to connect to the router in any fashion to add mac addresses to the WAP access list. Is there something I'm missing or do I need to try a hard reset on it and reconfigure everything?

    Read the article

  • Is It Possible to Change Default Windows Idle Time for Task Scheduler?

    - by alharaka
    From the official Microsoft docs: Detecting the Idle State The Task Scheduler service will verify that the computer is in an idle state every 15 minutes. The computer is considered idle if all the processors and all the disks were idle for more than 90% of the past 15 minutes and if there is no keyboard or mouse input during this period of time. Besides, any presentation type application that sets the ES_DISPLAY_REQUIRED flag will make Task Scheduler to not consider the system as being idle. In Windows 7, Task Scheduler considers a processor as idle even when low priority threads (thread priority < normal) execute. Is there any way to change the time to less than 15 minutes minutes? Am I assuming this hard-coded and impossible? My Google-fu has eluded me so far and I found nothing, but wanted to check here before giving up.

    Read the article

  • Blue screen - BCCode: 7F

    - by Joe
    I've recently bought a refurbished Toshiba Satellite A660 11M and I get the blue screen of death appearing fairly frequently now, and I can't seem to work out why or how to prevent/cure it. Firstly I thought it was due to Zone Alarm from what I read on the net, but then I thought it was a memory issue after it crashed whilst I was running Memtest. But after I ran Memtest a second time, it completed without any errors... Here are my computer specs - Toshiba Satellite A660 11M 500 GB hard disk 4 GB RAM Windows 7 Premium Nvidia GeForce GT 330M and here is more info regarding the crashes I keep getting - Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 2057 Additional information about the problem: BCCode: 7f BCP1: 0000000000000008 BCP2: 0000000080050033 BCP3: 00000000000006F8 BCP4: FFFFF80003040EC0 OS Version: 6_1_7600 Service Pack: 0_0 Product: 768_1

    Read the article

  • How to increase max FD limit for a daemon process running under a headless user?

    - by Ameliorator
    To increase the FD limit for a daemon process running under a headless user on a Ubuntu Linux machine we did following changes in /etc/security/limits.conf soft nofile 10000 hard nofile 10000 We also added session required pam_limits.so in /etc/pam.d/login. The changes got reflected for all the users who logged out and logged in again. Whatever new processes are starting under those users are getting new FD limits. But for the daemon which is running under a headless user the changes are not getting reflected. what is the way by which the changes can be reflected for the daemon which is running under headless user ?

    Read the article

  • Suggestions for Troubleshooting WIndows 7 lockups

    - by Craig L
    I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

    Read the article

  • Installing Linux kernel 2.6.25.14 on RHEL 5.4

    - by aaron
    I have to install Linux kernel version 2.5.25.14 on a RHEL 5.4 server because of drive compatibility issues. I follow the RedHat "Building a Custom Kernel" instructions running the following: $ make mrproper $ make xconfig $ make clean $ make bzImage $ make modules $ make modules_install $ make install But I get a bunch of warnings like this: WARNING: No module ehci-hcd found for kernel 2.6.25.24, continuing anyway When I try to boot this kernel it is unable to mount the hard drive, and kernel panics on startup. As far as I can tell I'm using a standard configuration (I just accept the defaults and save a .config file). Is there something I'm missing? Thanks.

    Read the article

  • setting nproc in /etc/security/limit.conf prevents ssh login

    - by omry
    I am trying to use /etc/security/limit.conf on Linux (Debian) to limit the number of processes per user. for starters, I tried to limit my own user processes by adding this to /etc/security/limit.conf: omry hard nproc 100 this locked my user out of ssh. I could open new processes (verified with su omry), but could not log into ssh with that user : sshd reported this in it's log: fatal: setreuid 1000: Resource temporarily unavailable also, I am certain my user is not running anything near 100 processes (actually 6). what can be the reason for this?

    Read the article

  • Convert color photos of documents to good black-and-white images?

    - by Norman Ramsey
    Since I don't have a copier or scanner, I'm using an 8 megapixel camera to copy documents. This works pretty well except they need a lot of processing afterward. I'd like to get from a photo to a bitmap, but using djpeg -grayscale -pnm photo.jpg | pgmtopbm -threshold -value XXX does not work so well, for two reasons: It's hard to guess what XXX should be, and XXX is different for different photos. Illumination varies, and sometimes a single threshold isn't what's right for the image. How can I do better? The ideal solution will be fully automatic command-line program that I can run on Linux. (I have already written a program to remove dark pixels from the edges of images.)

    Read the article

  • Possible to install Xmonad on Ubuntu separate from Gnome?

    - by Kurtosis
    I just downloaded Xmonad from the repository on my Ubuntu 10.04 box, but when I log out and try to log back in using Xmonad instead Gnome, it doesn't work. I just get the login screen background image and a mousepointer, and nothing else. Right-clicking does nothing, no menus or anything. Key combo's like Ctrl-X, Ctrl-Z, and Ctrl-Alt-Delete do nothing either. Left the computer in this state for 30 minutes while I went to the grocery store, but it was still hung when I returned and I had to hard-reboot it. A Google search returned a few sites showing how to configure Xmonad to work with Gnome, but I'm afraid to try this since I don't want to risk borking my Gnome installation, at least not until I've had a chance to learn Xmonad a bit. Is it possible to run Xmonad independently of Gnome? If so, anyone have any idea what might be wrong and how to fix it?

    Read the article

  • upgrading my computer system for office use

    - by denise ellul
    Presently I have the under-mentioned computer system. What should be changed and upgraded with the following products that I own presently? I am interested in performance issues related to cache memory, bus speed, RAM, CAS latency as well as other considerations. Thanks for your help. Processor (CPU): Intel Celeron Dual Core E3300 2.5 GHz Motherboard: Asus P5QPL-AM G41 Main Memory (RAM): 2 GB Team Elite DDR2 PC8000 Case: Coolermaster RC330 Power Supply Unit: 500W EZ-Cool Standard Storage Device (Hard Drive): 500GB Samsung Video Card: Intel GMA X4500 (On-board) Optical Drive: LG GH22NS50 Sound Card: AC 97 (On – board) Card Reader: Akasa Black TFT Monitor: 19” View Sonic Speakers: Logitech S120 2.0

    Read the article

  • HP proliant dl360 g5 fails to reboot

    - by user1039384
    Some history of this also available here. As of my latest update on the forum linked above, now cold reboot as well as hard reset and following boot for my proliant dl360 g5 works as expected and successfully boot the system. However, soft-reboot results in internal health indicator turning RED on the front and long beeps every around 6seconds until I either cold reboot or press and hold the power button. A summary of system state when this happens: Internal Health led indicator: RED External Health led indicator: Green No led next to any component is red or amber No POST message neither on the video output nor on IML logs (verified both at the time issue occures and after cold reboot that boots the system successfully). Any thoughts please share. I hope we can knock this issue down together with your help!

    Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >