Search Results

Search found 133 results on 6 pages for 'choppy'.

Page 4/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

  • How do I enable greedy MigrationHeuristic in Karmic?

    - by Matthew
    My laptop performs very poorly for 2d graphics. For example, Docky's zoom effect and compiz effects are very choppy. In Jaunty, I was able to fix this by adding the following line under the "Device" section in my xorg.conf: Option "MigrationHeuristic" "greedy" In Karmic, there is no xorg.conf by default, so I copied my old one (from Jaunty). However, everything is still slow. Here is my xorg.conf: Section "Device" Identifier "Configured Video Device" Option "MigrationHeuristic" "greedy" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection From googling about, it sounds like "MigrationHeuristic" is only an option for the "EXA" mode, while Karmic has switched the intel driver to "UXA". So I tried adding this line under the "Device" section: Option "AccelMethod" "exa" But this didn't help.

    Read the article

  • Video acceleration problem with Windows 7 games and PPTX files

    - by Jordan 1GT
    I have a Dell xps M1330 which originally ran Vista, but I upgraded to Windows 7. When I try to run a Win 7 game like spider solitaire I receive the following message: The game is running in software rendering mode. Hardware acceleration is either disabled or not supported by your video card driver which could slow down game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on. I confirmed that hardware acceleration is turned on. When I go to Dell's site, I'm told there is no later video driver. When I run the game it runs very choppy. I have a .pptx file which is doing strange things in normal view and I suspect it may be related to the same video acceleration problem.

    Read the article

  • Diagnose Slow Video Playback during Editing [closed]

    - by chadejah Hunter
    Possible Duplicate: I Want To Start Editing Videos But My Computer Moves Slowly I am using Windows 7 Home Premium on a PC with AMD 64bit Athlon Processor 2850e @ 1.80GHz, 2GB RAM, and a NVIDIA GeForce 6150SE nForce 430 graphics card I am using Pinnacle Studio 15 HD Ultimate. While editing videos the program moves normally but the playback is slow. When I press play the sound is normal but the picture is really slow and choppy. When the sound ends the picture continues to play and it speeds up. I updated the video card today, restarting the PC but get the same behaviour. Does anyone have any suggestions what I can do to get video working smoothly while editing?

    Read the article

  • Trouble exporting quicktime movie in Final Cut Pro

    - by Kato
    I'm having a very strange problem exporting a sequence to quicktime in FCP6. I've never had this problem before. After the sequence is exported, the last 3 minutes play very choppy, and the last minute does not export at all! There is nothing unrendered there, and the first 10 minutes play perfectly. The only thing that is different about the last bit is that there are titles there, but the export goes wonky at least 2 minutes before that. I'm exporting using Apple Pro Res 422 HQ 1920x1080 30p, and the footage is from HMC150, shot in 1080p30. Any advice would be appreciated!

    Read the article

  • My D-Link's Ethernet bridge downlink just got 10-30x slower?

    - by Jay Levitt
    TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

    Read the article

  • Why do some PDFs lag in Adobe Acrobat?

    - by Coldblackice
    I have a handful of PDFs open. One of them in particular is extremely laggy, almost to the point of being unreadable. When I scroll through its pages, it's almost like an extreme version of v-sync being turned off. Very choppy. Overall system resources are plentiful, and all of the other PDFs cruise up and down with no stuttering or problems. I've tried closing and reopening the problem PDF to no avail. It's a small PDF, only 3MB in size, with no graphics (only programming code snippets). Surely, it must be some type of problem with the specific PDF (I'll try opening it in another PDF-viewing program, rather than Acrobat X). Possible corruption? Could there be some type of GPU/hardware-acceleration intervening going on? I've never heard of such with PDF-viewing.

    Read the article

  • Video problem with Windows 7 Games

    - by Jordan 1GT
    I have a Dell xps M1330 which originally ran Vista, but I upgraded to Windows 7. When I try to run a Win 7 game like spider solitaire I receive the following message: "The game is running in software rendering mode. Hardware acceleration is either disabled or not supported by your video card driver which could slow down game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on." I confirmed that hardware acceleration is turned on. When I go to Dell's site, I'm told there is no later video driver. When I run the game it runs very choppy. I wouldn't care, but I loaded a .pptx file which is doing strange things in normal view and I suspect may be related to the same video problem. Any ideas?

    Read the article

  • Why can't I right click on flash videos in Chrome? (Ubuntu 9.10)

    - by user242065
    I'm trying to change the "quality" to low of a Hulu video so I can full screen it with out it being choppy but right click does nothing. When I right click in firefox it brings up a menu. I'm running Chrome on Ubuntu 9.10, is any one else having this issue I tried Google and got nothing back. I use chrome as my main browser, I have to switch to firefox every time I watch Hulu videos. Is there another way I cant change the quality of the flash video in Chrome?

    Read the article

  • 100% CPU in QuickTime H.264 decoder on Windows on Win7, except when using XP compat. mode

    - by user858518
    I have a Windows program that uses the Apple QuickTime API to play video. On Windows 7, CPU usage is 100% on one core, which I believe is why the playback is choppy. If I turn on XP compatibility mode for this program, the CPU usage is around 20% of one core, and playback is normal. Using a profiling tool called Very Sleepy (http://www.codersnotes.com/sleepy), I was able to narrow down the high CPU usage to a function in the QuickTime H.264 decoder called JVTCompComponentDispatch. I can't imagine why there would be a difference in CPU usage when XP compatibility mode is turned off or on. Any ideas?

    Read the article

  • Intel graphics driver installer, now the CPU fan is rarely quiet

    - by Space monkey
    I have an Optimus chipset: Intel HD 4000 (i7-3635QM CPU) Geforce 640m I don't care about the NVIDIA card, so I didn't try to install any proprietary drivers for it. So: I was having a choppy+high CPU experience with gnome-shell on Ubuntu 14.04. Only happened when I tried moving a window around quickly. I used the Intel graphics installer hoping that it will fix the problem. It did fix the problem, now there is no choppyness or high CPU when I move windows around. However, there is a new problem now: The fan is rarely quiet, doing barely anything at all will cause the fan to go into loud mode quickly. That happens despite the CPU usage being at just around 4%. This wasn't the case before installing Intel drivers. It would normally only do that if, for example, I'm installing packages or doing something that puts some stress on the CPU. I set all CPU cores to "powersave" using cpufreq-set, but nothing changed. Also on Windows, the fans are really quiet when I'm in powersave mode. I believe they completely shut off for most of the time. I remember the installer giving me a report at the end as to which packages it installed. Unfortunately, I didn't save the report and I don't know where it would have saved it if it did. Any ideas or similar experiences?

    Read the article

  • N64oid Brings N64 Emulation to Android Devices

    - by ETC
    Craving some Ocarina of Time adventures, Super Mario 64 antics, or some Star Fox 64 flying on your Android device? N64oid brings retro emulation of Nintendo’s popular N64 console to Android devices. N64oid is an N64 console emulator for Android devices. You’ll need a copy of the $5.99 emulator, ROMs (from the usual sources, unless you’ve got a ROM ripping setup in your basement and a stack of old cartridges), and a suitably speedy Android device. Older Android devices will find the playback choppy and subpar, but newer and speedier devices like the Nexus-One and Samsung Galaxy should have no problem handling the emulator. Like all emulators N64oid is a work in progress and emulating an entire closed-system console on a totally different set of hardware is never a perfect 1:1 emulation, but if you’re a die hard fan of classic N64 titles (check out this list of top ranked titles to inspire some nostalgia) N64oid is worth the price of a burger for sure. N64oid [Android Market via Download Squad] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform] Access and Manage Your Ubuntu One Account in Chrome and Iron Mouse Over YouTube Previews YouTube Videos in Chrome Watch a Machine Get Upgraded from MS-DOS to Windows 7 [Video] Bring the Whole Ubuntu Gang Home to Your Desktop with this Mascots Wallpaper Hack Apart a Highlighter to Create UV-Reactive Flowers [Science]

    Read the article

  • How can I better implement A star algorithm with a very large set of nodes?

    - by Stephen
    I'm making a game with nodejs in which many enemies must converge on the player as the player moves around a relatively open space (right now it is an open field with few obstacles, but eventually there may be some small buildings in the field with 1 or 2 rooms). It's a multiplayer game using websockets, so the server needs to keep track of enemies and players. I found this javascript A* library which I've modified to be used on the server as a nodejs module. The library utilizes a Binary Heap to track the nodes for the algorithm, so it should be pretty fast (and indeed, with a small grid, say 100x100 it is lightning fast). The problem is that my game is not really tile-based. As the player moves around the map, he is moving on a more or less 1-to-1 per-pixel coordinate system (the player can move in 8 directions, 1 or 2 pixels at a time). In preliminary tests, on an 800x600 field, the path-finding can take anywhere from 400 to 1000 ms. Multiply that by 10 enemies and the game starts to get pretty choppy. I have already set it up so that each enemy will only do a path-finding call once per second or even as slow as once every 2 seconds (they have to keep updating their path because the players can move freely). But even with this long interval, there are noticeable lag spikes or chops every couple of seconds as the enemies update their paths. I'm willing to approach the problem of path-finding differently, if there's another option. I'm assuming that the real problem is the enormous grid (800x600). It also occurs to me that maybe the large arrays are to blame, as I've read that V8 has trouble with large arrays.

    Read the article

  • Youtube video streaming slow

    - by Newbie
    When I try to stream youtube videos on my ubuntu 11.04, they don't stream smoothly. They buffer well and are choppy. Here's my Config: Laptop: Gateway NV58 Ram : 4 GB Ethernet Controller: Broadcom Corp NetLink BCM5784M Gigabit Ethernet PCIe (rev10) Let me know if you need more details. Thanks Newbie Output of "lspic": 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 04:00.0 Network controller: Intel Corporation WiFi Link 5100

    Read the article

  • Radeon HD 6850 VMware 3D Support?

    - by Matt
    I'm a new Ubuntu user (new to all of linux actually). I've installed Ubuntu 11.10 x64 and have been enjoying it, but I wanted to see how it would perform using VMware for small time gaming since I find dual booting too much of a nuisance to even bother using Ubuntu at all (sorry!). I have an Asus EAH6850 DirectCU Radeon HD 6850 graphics card and I've installed the additional ATI/AMD proprietary FGLRX graphics driver, but when I open a Windows XP 32bit machine I installed through VMware, I get this message: "The GPU driver currently installed on this host may cause issues with VMware products. If you notice any issues please disable the 3D support in the affected virtual machines." I still have 3D capabilities in the VM but they are very very choppy even running the DX tests (the spinning cube). I've seen people on youtube and other forums saying that since the new 3D acceleration in VMware 8 gaming is very possible through VMs (and I've seen them running the DX tests with the spinning cube very smoothly). I'm wondering if my graphics card isn't fully supported or if I have installed it wrong. Also when I check system info (on the host Ubuntu machine) it says "Graphics VESA:BARTS" Should my Radeon HD 6850 be showing up there? The rest of my basic system info i5 2500k 8GB 1600MHz memory Guest is running with access to all 4 cores of processor and 3gb memory assigned.

    Read the article

  • Youtube video streaming slow

    - by Newbie
    When I try to stream youtube videos on my ubuntu 11.04, they don't stream smoothly. They buffer well and are choppy. Here's my Config: Laptop: Gateway NV58 Ram : 4 GB Ethernet Controller: Broadcom Corp NetLink BCM5784M Gigabit Ethernet PCIe (rev10) Let me know if you need more details. Output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 04:00.0 Network controller: Intel Corporation WiFi Link 5100

    Read the article

  • Ubuntu 12.04 desktop, VNC viewer not refreshing screen

    - by user73279
    I've had this issues across multiple machines and multiple versions of Ubuntu desktop (all 10.04 or later). Usually it happens with an old laptop I've put Ubuntu on but now it's happening on my primary dev machine (a quad-core PC recently upgraded to Ubuntu 12.04 desktop). The problem is this - I can connect to the machine and login with the password, the initial screen looks fine but never refreshes. I can see the monitor for the machine across the room and can see the mouse move and the menus pop up but the image of the screen on the PC in front me running the VNC viewer never updates. So the mouse and keyboard commands are working. Ubuntu 12.04 Desktop Ultra VNC Viewer (also seen with RealVNC's free VNC viewer) Desktop Sharing Static IP on eth0; Dynamic ID on eth1 I think it is an Ubuntu config issue because this PC used to work just fine with 9.04, 10.04, and 11.10 (over the past couple of years). I've also had a couple of laptops that used to have this issue with older Ubuntu's but don't with 12.04. Additional info: The Win7 PC I'm trying to use to control the Ubuntu PC is connected via 2 DLink 8-port gigabit routers. The Ubuntu laptop I usually control via VNC is typically only connected to the network via wireless. The screen refresh is choppy but usable. I've repeated the issue on a Win7 laptop which was connected via ethernet and wireless.

    Read the article

  • How can I draw crisp per-pixel images with OpenGL ES on Android?

    - by Qasim
    I have made many Android applications and games in Java before, however I am very new to OpenGL ES. Using guides online, I have made simple things in OpenGL ES, including a simple triangle and a cube. I would like to make a 2D game with OpenGL ES, but what I've been doing isn't working quite so well, as the images I draw aren't to scale, and no matter what guide I use, the image is always choppy and not the right size (I'm debugging on my Nexus S). How can I draw crisp, HD images to the screen with GL ES? Here is an example of what happens when I try to do it: And the actual image: Here is how my texture is created: //get id int id = -1; gl.glGenTextures(1, texture, 0); id = texture[0]; //get bitmap Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.ball); //parameters gl.glBindTexture(GL10.GL_TEXTURE_2D, id); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_CLAMP_TO_EDGE); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_CLAMP_TO_EDGE); gl.glTexEnvf(GL10.GL_TEXTURE_ENV, GL10.GL_TEXTURE_ENV_MODE, GL10.GL_REPLACE); GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); //crop image mCropWorkspace[0] = 0; mCropWorkspace[1] = height; mCropWorkspace[2] = width; mCropWorkspace[3] = -height; ((GL11) gl).glTexParameteriv(GL10.GL_TEXTURE_2D, GL11Ext.GL_TEXTURE_CROP_RECT_OES, mCropWorkspace, 0);

    Read the article

  • Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

    - by DS13
    I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

    Read the article

  • Artificial Intelligence ... how to make an object roam freely/avoid other objects, and model consciousness? [on hold]

    - by help bonafide pigeons
    Say a simple free roam battle scene in which a player runs around freely and engages in battle with other enemies/objects, as shown below: The dragon/dinosaur (or whatever that thing I drew appears to be) will, by some measure, try and avoid attacks so it is modeled to appear to have a conscious desire to avoid pain. My question is ... since this is very complex, many possible strategies for solving this, algorithms, etc., what is the basic idea behind how this would be accomplished in any sort? Like, we can assume the enemy in the picture is not just going to aimlessly hop around and avoid, but freely be modeled to behave as if it were really exploring/fighting. For the best example I can give, witness the behavior of the enemies in Final Fantasy 12 in this video: http://www.youtube.com/watch?v=mO0TkmhiQ6w How do the pros, or how would anyone attempt solve/implement this? PS: I have tried several times to give an image the "illusion" that is has a conciousness, but aside from emulating a real animal's consciousness in complete, I fall short and get choppy moving images that follow predictable patterns, error-prone movements, and the worst imaginable scenario of a battle engagement.

    Read the article

  • Is there a PROPRIETARY driver (NVIDIA or ATI) that actually works with 12.10?

    - by DS13
    NOTE: I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. THE MAIN DIFFERENCE SEEMS TO BE: I always get a black screen with a blinking cursor, while others seem to get through the boot-up and see distorted graphics or just their wallpaper. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics (even just menus) are very slow, choppy, and distorted. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: -Does anyone know of a PROPRIETARY driver that will actually work on 12.10 with a NVIDIA or ATI card? -Should I just buy a newer graphics card to put in as a replacement? MORE INFO: This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent'ish Core2Duo Intel processor (2.13Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card (NVIDIA Geforce 7350 LE) is holding me back. TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -tried installing 12.04 *same results -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail -UPDATE- Re-tried everything above with a new NVIDIA Geforce 210...same results for everything. -UPDATE #2- Re-tried everything above with a new AMD Radeon HD 6450...installed the proprietary driver from Ubuntu's "Software Sources" menu...EVERYTHING NOW WORKS. See "answer" below for summary.

    Read the article

  • WPF DataGrid : CanContentScroll property causing odd behavior

    - by Sonic Soul
    i have a solution where i generate a DataGrid (or multiple instances) based on user criteria.. each grid keeps receiving data as it comes in via ObservableCollection the problem i had, was that the scroll acted weird. It was choppy, and scrollbar would resize it self while scrolling. than i found.. CanContentScroll property! It completely fixes the weird scrolling behavior bringing me temporary bliss and happiness. however, it causes 2 unfortunate side effects. whenever i re-create grid instances and bind them to my observable collection, it freezes my entire window for 5 seconds. when my grid grows to a big size, this delay can last for 30 seconds. when i call TradeGrid.ScrollIntoView(TradeGrid.Items(TradeGrid.Items.Count - 1)) to scroll to the bottom, it jumps to bottom and than back to the top. is there another way to achieve smooth scrolling perhaps?

    Read the article

  • How to make tooltip move with mouse (winforms)

    - by BlueRaja The Green Unicorn
    I want it to move when the mouse moves, and disappear when the pointer isn't over the label. This doesn't work: private void lblRevisionQuestion_MouseMove(object sender, MouseEventArgs e) { toolTip1.Show("test", this, PointToClient(MousePosition), Int32.MaxValue); } private void lblRevisionQuestion_MouseLeave(object sender, EventArgs e) { toolTip1.Hide(this); } As soon as the tooltip appears, it steals focus away from the form, evoking MouseLeave. Then the tooltip hides, and the pointer is once again over the label, invoking MouseMove. This results in a choppy, flashing tooltip. Is there any way to do this?

    Read the article

  • How to fix slow scrolling when using webkit-transform and relative positioning on the iphone

    - by BeWarned
    I have implemented scrolling of a div by using relative positioning and webkit animation for the iphone, it works beautifully on desktop safari but is choppy on the actual iphone (fine on the simulator). The scrolling works by having a div nested and clipped (overflow:hidden) by its parent. I then set the top position and animate it with -webkit style declarations. The iphone seems to noticeably slow down when there are a lot of items in the inner div. Any ideas how make the scrolling smoother? This was a problem with iScroll code and my own hand coded stuff.

    Read the article

  • I have some questions about building an AIR app for use with a connected projector.

    - by knuckfubuck
    For an app I'm working on, I'd like to have a control panel window and a video output window to use for projecting video with an attached projector. I have built many Flash applications but this will be my first time using AIR so I have some questions. Is it possible to have two seperate windows as part of one AIR application? Can one of the windows (the video output) be in full-screen mode while the other window stays normal? How does AIR do with playing local video? Will there be crashes or choppy playback? Is there a better language option for what I'm trying to accomplish?

    Read the article

  • Using jQuery to rapidly scroll through a countdown

    - by CaptainAwesomePants
    I have a webpage that displays the number 0, and when the user presses "start", the number should rapidly increasing until it reaches a target number (maybe 10,000 or so) a few seconds later. I'd like the numbers to scroll by as if they're on a slot machine wheel. I've managed to mostly hack something together using the ScrollTo plugin, but it's slow and choppy. It always stops briefly at certain divs along the way. Perhaps I'm using it wrong. Is there a better way to accomplish such an effect?

    Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >