Search Results

Search found 1184 results on 48 pages for 'air borne'.

Page 40/48 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• My desktop has started overheating -- how hot is hot?

  - by Jerry

  I have a two year old desktop, some random quad core HP desktop. It used to run very quietly, but in the past month, the fans start up anytime anything "serious" is being done -- compiles, playing video, etc. Right now, speedfan and speccy report the cores are between 50C and 70C. Speedfan reports this as hot. (Nice flame icon.) Well, the system does sit on my carpet, so two weeks ago, I took off the lid, and cough *cough* it was pretty filled with dust. I got out an air can, turned on a vacuum and carefully got out all the dust that I saw on the CPU fan the case fans any fan I saw (graphics board) and blew out all the dust I could from all the circuit boards. And then I closed the case back up. It has definitely run cooler since then, but it still runs hot, and I hear high speed fan noise I never heard before. How hot is too hot? At what temps do consumer grade CPUs die? What should I be looking to do? Replace CPU fan? (It seems to work) Replace power supply fan? Assuming the dust problem is gone, where should I be looking to determine why the machine is heating up? Epilogue: After following the various pieces of advice given here, the system did run cooler, but it was still noticeably running louder (hotter) than just a few months prior. I ended up purchasing a new cpu heatsink and fan and during installation found the cooling grease from the original heatsink was just a dried, cracked layer, probably more of an insulator than heat transfer agent. With the new fan AND the new heatsink compound, the system ran much much cooler and the fan rarely turns on.

  Read the article

• Programmer configuring a new network

  - by David Lively

  I'm in the process of expanding my home network from a couple of laptops on a wireless Verizon FiOS router to include: Linksys 24-port switch Cisco Pix 515 Cisco 3640 router One new development desktop and three new machines to act as a db server, web server and a backup system. My company is moving offices and we've decommissioned some older hardware, which I was able to pick up for the cost of the labor to move it home from the office. The benefits to working with dedicated web and db servers are very valuable to me. I know very little about network topology, other than that everything plugs into the switch, which then plugs into the cheap Verizon router. (Verizon provides a coax connection that the router must translate into Ethernet before I can use it with any of this equipment). Questions: What is the recommended topology for this equipment? Verizon router - Pix - 3600 - switch? Is the 3600 even necessary or desirable? The Verizon router has one WAN port and 4 client ports, all 10/100. Is there any performance benefit at all to wiring multiple connections from the verizon router to the switch, assuming I don't use the Pix? Should I use the Pix? Software firewalls are a pain, and seem silly if I have a device like this lying around. Anything else I should know? Am I wasting my time with this? I also obtained a 7 foot rack, shelves, patch panels, UPS, patch panels, etc, which are going into a conveniently air conditioned closet. All constructive advice appreciated.

  Read the article

• Enable CPU fan always on

  - by Gundars Meness

  I am using 3 years old overheating laptop and I want my CPU fan to be spinning 24/7 regardless of the consequences. How to make it spin? The problem is that CPU & GPU heats up to 68°C (154 F) right after boot and never goes down, because CPU fan is not spinning full throttle. It starts spinning faster when temperature goes over 70°C and stops when it reaches seventy again. When doing heavy work on databases, it gets from 70 to 90 in no-time and automatically powers off. Bios does not contain any "fan spin 100%" options, just "spin slowly all the time" and "auto" which is more useless than the first one since my fan doesn't have pwm wire. Currently I'm solving this with cooling stand (3x5V), but it isn't much of a help. I would rather use the CPU fan since it is the only fan directly responsible for cooling down CPU/GPU. But how to make it spin 100% all the time? Should I attach it's red power wire to motherboard to get constant 5V (is there such option?), or is there an option to control it via software? Laptop: Samsung R528 2.3 GHz Intel i3 with Nvidia GeForce 310M Bios: Phoenix 03KT.M003.20100622.KSJ (and that is latest update) OS: Ubuntu 12.04.2 LTS with 3.2.0.51 kernel CPU fan: Image/Description Has 5V 0,4A and only 3 pins, no pwm. P.S. Yes, I did clean everything with alcohol, freed the air vents, changed thermal paste etc; that reduced temperature by 4 degrees.

  Read the article

• Coffee spilled and went inside CPU...computer not starting

  - by Harpreet

  Today coffee got spilled over my table, and some of it (very less) reached the CPU placed under the table. I think little bit of it got inside the CPU through the front face of the CPU. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

  Read the article

• Simultanious process mysteriously ending

  - by Matt

  I'm trying to run a large air quality model, written in FORTRAN, setup with bash scripts, and run in a work queue (slurm.) The first part of the modeling is to run an "entry" model, this runs with MPI in the work queue but only on one process. At one point in the logs, there's a mysterious FORTRAN STOP, and then later the model fails because something wasn't set up properly. This FORTRAN STOP isn't from the main process, which continues running. This is a huge model, but as far as I know there should not be any other processes running at the same time. It consistently fails at the exact same spot. (I can move it by adding debug, but the debug is in the main process) How can I determine what this process is? I've tried added a call to strace -feprocess $SHELL in the run script, but I'm new to this, so if it has offered any info, I haven't been able to use it yet. The is no trace output around the FORTRAN STOP. The whole process occurs so fast that I can't seem to observe it by using ps. Is there a way I can somehow monitor all the processes being initiated from the time the work queue starts? Or some other way I can figure out what is failing? This is running on CentOS 6.4, with Slurm, compiled with PGI 13.

  Read the article

• Cannot connect with Cisco VPN but can connect with ShrewSoft VPN

  - by rodey

  EDIT: We connected an air card to the computer to use a different Internet connection and using the Cisco software, we were able to successfully connect to our VPN server. I just don't understand why the ShrewSoft VPN client would connect but the Cisco connection won't. I'm not our network admin so sorry if I butcher some of the terminology. I have a computer at remote site that connects to our network through Cisco VPN. It uses the Cisco VPN software to do so. The problem is that the computer at this site cannot connect to our VPN because it is getting error "Reason 412: The remote peer is no longer responding." To see if perhaps something on their network was blocking the connection, I installed the ShrewSoft VPN client on the computer, imported our .pcf file and connected with no problem. I have tried two different versions of the Cisco VPN software (4.8.0.* and 5.0.03.*) and have the same problem. I installed Wireshark on the computer and have confirmed (while trying to connect through Cisco) that the computer is trying to contact the VPN server but is not receiving a response. We are not having any other problems regarding users not being able to connect. I'm at a loss at what else to check. I'll be monitoring this and have access to the computer at any time.

  Read the article

• What is the best VM for developing WPF apps from within OS X?

  - by MarqueIV

  All of my machines are Macs (Mac Pro, MacBook Pro, MacBook Air and Mac Mini (and Apple TV 2.0 too! :) ) but for my day-job, I develop .NET/WPF applications. Normally I just boot into Boot Camp and develop that way, which of course works great, but there are times when I need to simultaneously get to things on my Mac-side of the equation, so I've bought both VMware 3.1 and Parallels 6. Both work, however, even on my Mac Pro where I paid to upgrade to the better video cards (the NVidia 8600s I think vs. the stock ATI cards) the WPF performance bites!! Now this confuses me since both boast that they support not only hardware-accelerated OpenGL 2.1, but also hardware-accelerated DirectX 9 (VMware even allegedly supports DirectX 10!) via their respective virtual drivers and both can run 3D games just fine, even in a window. But even the simple act of resizing a WPF window that has a tiled background results in some HIDEOUS repainting and resizing behaviors. It's damn near closer to what you'd expect over RDP let alone a software-only renderer (forget accelerated hardware completely!) So... can anyone please tell me WTF WPF is doing differently? More importantly, how can I speed up the WPF performance? Should I switch to VirtualBox that also has support for DirectX? Or am I just gonna have to 'byte' the bullet (sorry... had to. So I like puns! Thank Jon Stewart!) and continue using Boot Camp?

  Read the article

• Coffee spilled inside computer, damaged hard drive

  - by Harpreet

  Today coffee spilled over my table, and some of it (very less) reached the PC case placed under the table. I think little bit of it got inside the PC case through the front. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help!! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

  Read the article

• Can't open cocoa emacs from terminal using open -a

  - by Shane

  I installed emacs on my MacBook Air running Mac OS X 10.6.5 from this site http://emacsformacosx.com/. I believe this is what used to be called cocoa emacs. I dragged it into my Application folder and it works fine when I run it from there. I want to be able to run it from the Terminal. After some googling, I tried open -a /Application/Emacs.app foo.txt (foo.txt was and existing file). I got two emacs windows - one with welcome screen and one with foo.txt loaded. I tried a few applications in the /Applications directory and they did not seem to behave like this. I had installed it using my own account (an admin account) so after doing ls -l on /Application I noticed that the owner and group were different from the other entries in this folder. I recursively changed the owner and group to root and wheel, like the others, but this did not help. The only thing that looks funny now is that there that ls -l show a @ character which has something to do with extended attributes but I don't know how to check these. Any suggestions on what to check next? Is using the open command the only to run the program? Can I simulate what it does using a shell script?

  Read the article

• What is a long-term strategy to deal with CPU fan dust in my home office?

  - by PaulG

  There are numerous discussions of CPU overheating and how sometimes this can be corrected by removing the dust from the CPU fan. I have read many of these, but I can't find anyone expressing a long-term strategy to deal with this problem. There are some suggestions here, for example, about how often the inside of the computer should be dusted. But I find this generally unsatisfactory. As it stands, in my rather dusty house (heated by a wood stove, with no central air circulation), I need to vacuum out the CPU fan every 3 to 4 months. At high CPU load, this can make a difference between 65C and 100C. I'm tired of hauling out the vacuum every time I anticipate high CPU load. What steps can I take to deal with this systematically in the long-term? Moving my high CPU load computing to the cloud is not a realistic option. Neither is vacuuming my home office more than once a week! (Details: my computer is on the floor in a Cooler Master HAF922 case, and uses an Intel CPU fan on an i7 chip) EDIT: While this would definitely solve the problem (submerging motherboard in mineral oil), it is a bit of an expensive solution.

  Read the article

• Samsung laptop randomly shuts down

  - by Dmatig

  I've rewritten this question because it turned into an indecipherable mess. I have a Samsung R560 laptop that is overheating, and shutting itself down under load consistantly. Thank you quickcel for reccomending me Speedfan to monitor my temps. Here they are (Load / Idle): (Ignore "Temp1 and Temp2", whatever sensors they are they'd always random, pretty sure they're broke). The load temperature is after just 5 minites of playing Fallout 3 - another 5 minutes and it (the GPU - 9600M GS) consistantly breaches the mid 90's then shuts down, so it's hard to get a good picture of it. I'm looking for some solution or way to decrease these temperatures, because they seem far too high even idle. I've tried: Opening up the case and clearing of all dust with compressed air. Updating drivers for my Graphics card Have purchased and am using a notebook cooler I don't want to: Undervolt / underclock (defeats the point of having a more expensive card) Use lower power / performance settings (again, i might as well have bought something cheaper) Is there anything else i can try (software or inexpensive hardware) that can help me fix this? Has anybody had a Samsung laptop and knows if this can be sorted under my warranty, and the turnaround time of sending it off (UK?)(it has always ran hotter than it should, but now at 6 months old is getting hot enough to power off)

  Read the article

• Compaq motherboard CQ60 AMD - nvidia chipsed graphic problem

  - by Dritan

  Hi! It nice to have read that you solved this problem this way. I have 2 laptops Compaq CQ60 AMD Athlon with Nvidia graphic cards. the first one is new, when i press power button, it lights up only the ON led in front and nothing else, no fan working, blank screen, no beep.. I don't know what may be the problem. When I put on power adaptor, it lights up only the side power led near dhe power adapter plug but it doesn't light up the front led one. the second one have this problem that it spins the fan, light power and On led, but it doesn't show nothing on the screen blank (even with external monitor). In this case it maybe this problem of the Nvida Graphic Chip and it may need a reflow. I have an hot air station, but I don't know if I should try this or the oven one. Please can you give me any suggestion what to do to solve this. I have read that the solution of the Oven method is just temporary,maximum of three months, do you have the same experience about this? Any suggestion is wellcome.

  Read the article

• Getting rid of your server in a small business environment

  - by andygeers

  In a small business environment, is it still necessary to have a central server? Speaking for my own company (a small charity with about 12 employees) we use our server (Windows Server 2003) for the following: Email via Microsoft Exchange Central storage Acting as a print server User authentication / Active Directory There are significant costs associated with running a server like this: Electricity, first for the server itself then for the air conditioning required (this thing pumps out a lot of heat) Noise (of which there is a lot) IT support bills (both Windows Server and Exchange are pretty complicated, and there are many ways they can go wrong) I've found ways to replace many of these functions with cheaper (better?) alternatives: Google Apps / GMail is a clear win for us: we have so many spam related problems it's not even funny, and Outlook is dog slow on our aging computers You can buy networked storage devices with built in print servers, such as the Netgear ReadyNAS™ RND4210 that would allow us to store/share all of our documents, and allow us to access printers over the network The only thing that I can't figure out how to do away with is the authentication side of things - it seems to me that if we got rid of our server, you'd essentially have a bunch of independent PCs that had no shared pool of user accounts / no central administrator. Is that right? Does that matter? Am I missing any other good reasons to keep a central server? Does anybody know of any good, cost-effective ways of achieving the same end but without the expensive central server?

  Read the article

• Can I use a Drobo FS over the internet? -Or alternative?

  - by SeniorShizzle

  I have a lot of files. A HUGE Aperture library, lots of design work from Photoshop, and a rather large iTunes library too. I really want to get a Drobo FS, the networked one, to store all of my stuff on, so that I can get to it from my MacBook Air (which obviously with its minuscule 64GB drive can't hold my Aperture library by itself) and my iMac which is my main powerhouse. The dealbreaker for me is that I NEED to be able to access my Aperture library, and especially my iTunes library from across the internet. I understand that it will probably be slow and everything, but there's nothing else I can do besides hauling around a huge hard drive with me. So, is there any way I can somehow share my Drobo across the internet, on a VPN or something? My other alternative is to upload everything to my web host, FatCow, which offers unlimited disk space (something I hope to make them regret) and then access it using Expandrive. My only thoughts with this are that with the Drobo, any work that I do locally will be much snappier than if I have to work everything off the cloud. Any suggestions about alternatives would also be welcome.

  Read the article

• Router drops internet connection if I connect an additional pc

  - by BluePerry

  Hey, I'm using a SMC2804WBRP-G router connected to my ADSL-modem. Usually there are two computers connected to this router: a win7 ultimate desktop(wired) and a macbook air (wireless). Both working absolutely fine and never caused any connection drops as far as I know. A new room mate moved in last month and each time she starts up her win7 home laptop the router looses the internet connection. The laptop is on a wired connection. The first time she connected to my router, the connection dropped every 2 mins. To find out whats wrong with her machine I disabled all unnecessary services etc. besides the anti virus software. That helped to eliminate almost all of those periodic connection drops. But the start up drop remained and I've got the feeling that the router is still loosing connection from time to time. I haven't had the time to find out what service caused the periodic drops. But I'm more concerned about is that start up drop. Can anyone point me in the right direction to look for the problem? I would be very thankful for any hints or tips!

  Read the article

• Xmonad on windows laptop

  - by Kevin L.

  I'm a Linux developer in the market for a laptop. 90% of my time is spent in Emacs, the terminal, and Google Chrome, and I want to use them within the excellent Xmonad tiling windows manager. Given these constraints, I can only see two options: Run Linux on a laptop Run Windows on the laptop, and spend all of my time working within a Linux VM. Years of experience suggest that the first option will take many frustrating hours and probably be suboptimal w.r.t. battery life, wifi, and fn keys like screen brightness or audio adjustment. For the second option, what would be the ideal setup? I've had a lot of luck with Cooperative Linux on my Samsung NC-10 netbook (Windows XP), but I would have to setup the X11 server myself. What about using VirtualBox (which includes the guest VM's GUI)? Has anyone tried this? Hardware-wise, I'm looking for something in the "Macbook Air killer" category; Samsung Series 9 laptop, Lenovo IdeaPad U300s, &c. (i.e., matte screen, 5h+ battery life, 3ish pound weight). Price is not a consideration; any suggestions?

  Read the article

• Is there a screen sharing/remote desktop app for mac that lets you use a different host screen resolution?

  - by MarqueIV

  Ok, there are tons and tons of questions about remote desktop for mac and they're all being closed as duplicates. I however am specifically looking for one that will let me use a different resolution than the host, the way you can with Remote Desktop for Windows. For instance, when I connect to my 11" Macbook Air booted into Windows7 from my quad-screen desktop, also booted into Win7 using Microsoft's Remote Desktop Client, it blanks out the screen on the notebook, then virtualizes the video across all four of my desktop's monitors at their native resolutions (2560x1600, 2 x 1920x1200 and 1600x1200) and the notebook now acts as if it has four physical monitors connected to it. All of this from a notebook that only has a 1366 x 768 native resolution. Even when running OS X on the client running RDC, while it doesn't support multi-monitors like its Win counterpart, it still lets me run at the native resolution of the client screen of 2560x1600. Again, it just blanks out the host screen while doing so. However when using Mac's screen sharing, since that is just glorified VNC, it just mirrors what's already on the host's screen, meaning it will always be a single screen with the resolution of 1366x768. This of course makes sense since VNC is a mirroring solution, not a video-virtualizing one like RDC, but it means that on my quad-monitor setup, the remote window isn't even large enough to fill up a single monitor, let alone four (unless you have a client that can scale it up, but that's video scaling. It's still only 1366x768.) So what I'm looking for is if there is a solution on the Mac that lets me do the same thing as RDC in a Win environment. Don't care if I have to pay. I'd gladly pay several hundred dollars for this. I just need that specific feature. Note: People have suggested various VNC clients, but the VNC host still runs at 1366x768 so that will not work here. Ever. Also, people have suggested Synergy/Synergy+/Teleport and such which share the keyboard and mouse, not video. Completely different animal unrelated to what I'm looking for.

  Read the article

• Can't open cocoa emacs from terminal using open -a

  - by Shane

  I installed emacs on my macbook air running os x 10.6.5 from this site http://emacsformacosx.com/. I believe this is what used to be called cocoa emacs. I dragged it into my Application folder and it works fine when i run it from there. I want to be able to run it from terminal. After some googling, i tried open -a /Application/Emacs.app foo.txt (foo.txt was and existing file). I got two emacs windows - one with welcome screen and one with foo.txt loaded. I tried a few applications in the /Applications directory and they did not seem to behave like this. I had installed it using my own account (an admin account) so after doing ls -l on /Application I noticed that the owner and group were different from the other entries in this folder. I recursively changed the owner and group to root and wheel, like the others, but this did not help. The only thing that looks funny now is that there that ls -l show a @ character which has something to do with extended attributes but i don't know how to check these. Any suggestions on what to check next? Is using the open command the only to run the program? Can I simulate what it does using a shell script?

  Read the article

• Is a Hyperthreaded CPU more powerful and more efficient than a Dual-core CPU? [closed]

  - by user1811864

  which computer to choose with Pentium processor hello they are getting rid of the old computer equipment in the office and i have to choose the computer to take home i get first choice to pick. -15 inch lcd screen 4 gb of ram core 2 duo dual Core E8400 3.00 GHz dvd writer windows vista/ linux -15 inch crt monitor with 2 gb ram and pentium 4 2 ghz single core HT technology windows xp hardisks both 250 GB my friend is telling me to choose the second one Pentium single core HT because he told me it runs faster becuase of HT technology and cooler and consumes less current electricity so it wont get overheated because it has HT technology so it's high definition for encoding and watching HD movies and HD sound and is like a gaming pc to play internet games. And also he said the dual core 8400 runs at 3 ghz compared to the 2 ghz so it heats very much because of the two extra cores so it takes more current raising electricty bills and is not good for gaming and watching HD movies and internet flash animations and games because of getting heated everytime. And he wants to choose and take the E8400 because he has air conditioning at home so it will be safe from heating. So which one computer should i take is it really faster because of the HT High definition technology and will i be able to play internet flash card games better and watch good HD movies Youtube etc and play all the music and songs.

  Read the article

• Laptop authentication/logon via accelometer tilt, flip, and twist

  - by wonsungi

  Looking for another application/technology: A number of years ago, I read about a novel way to authenticate and log on to a laptop. The user simply had to hold the laptop in the air and execute a simple series of tilts and flips to the laptop. By logging accelerometer data, this creates a unique signature for the user. Even if an attacker watched and repeated the exact same motions, the attacker could not replicate the user's movements closely enough. I am looking for information about this technology again, but I can't find anything. It may have been an actual feature on a laptop, or it may have just been a research project. I think I read about it in a magazine like Wired. Does anyone have more information about authentication via unique accelerometer signatures? Here are the closest articles I have been able to find: Knock-based commands for your Linux laptop Shake Well Before Use: Authentication Based on Accelerometer Data[PDF] Inferring Identity using Accelerometers in Television Remote Controls User Evaluation of Lightweight User Authentication with a Single Tri-Axis Accelerometer Identifying Users of Portable Devices from Gait Pattern with Accelerometers[PDF] 3D Signature Biometrics Using Curvature Moments[PDF] MoViSign: A novel authentication mechanism using mobile virtual signatures

  Read the article

• How can laptop keyboard keys be removed and replaced?

  - by Lord Torgamus

  I'm trying to fix a laptop keyboard that has issues with keys on its left side. Just by feel, it's clear that something sticky got under there. There could be something crunchy too, but that might just be the sound of the key's spring releasing itself from the sticky. I don't know the cause because it's not my computer and the owner isn't sure, but I'm guessing soda spill for now. The computer is an HP dv2500. I've removed the keyboard and blown under it but that hasn't helped. I didn't use compressed air because I just don't have any available, but I suspect it wouldn't help with sticky. So, I'd like to pop they keys off and clean with damp cotton swabs or similar. Is there a proper way to remove the keys? I've found some instructions via Google for non-laptop keyboards, but they don't seem like they'd work for me. Alternate solutions to the problem also welcome, but I've been curious about how to remove the keys for some time for other reasons.

  Read the article

• Is reliability reputation of mechanical keyboards overblown?

  - by Rarst

  A while back I worked up to finally buying mechanical keyboard (~$100 range, "black" switches) and was initially quite content with purchase. However just outside first year (read it - as soon as warranty expired) it started to develop repeat issues (press once, get chain of letter repeated) on multiple keys. It doesn't react to generic cleaning (up to compressed air) and searching Internet shows noticeable amount of people with similar-to-identical issues, spanning years. This makes me severely hesitant to buy another mechanical keyboard, considering: every other keyboard I ever owned, including ultra-cheap crap managed to last longer than that typing experience is nice, but not lifechanging-fan-forever nice for me my choice of mechanical keyboards is severely limited not many brands represented in local market and primarily crazy looking gamer models russian (not to mention russian and ukrainian if possible) layout excludes international ordering price tag for a meek year of use I got our of it is plain demoralizing It is obvious mechanical keyboards have their fans, but shopping around for "best fit" or getting into multiple hundreds price tags is probably not something I am highly interested in. Considering my constraints and bad experience with reliability, is it practical for me to sink more money into buying mechanical keyboard(s) again? In other words - manufacturers are beaming about how crazy reliable mechanical keyboards are. Are active long time users of such keyboards confidently of same opinion?

  Read the article

• Wireless card overheating?

  - by Sidney

  Ok, so I've had my laptop for several years (I wanna say 4, but possibly more), it's a Toshiba Satellite. I'm running Linux mint 15, and am having a strange new issue, after several hours of running my wireless stops. It can SEE wireless networks, but refuses to connect to any of them. (On a sidenote, connecting to a router with a cable at this point works fine) The fact that it can SEE the networks make me think the card is in good condition, and it's software related The fact that it works for several hours before booting me makes me think perhaps the transmitter is getting too hot. I don't use my laptop in dusty environments, and keep it on an elevated surface (alternatively, I actively try not to let it sit on soft surfaces where the vents get covered). I spray out the cpu fan about once a year with compressed air about once a year, so I really don't think the insides should be too dirty. Finally, unfortunately, sensors only gives me CPU temps, but they run about 40-50 degrees C, which from my understanding is perfectly normal for an I3. Does anyone have any suggestions on what I can do to determine the root cause of this?

  Read the article

• How long will a "safely stored" Solid-State-Drive (SSD) keep its data? (e.g. bank safety-deposit box)

  - by user31575

  Here's my usecase: once-and-only-once copy off photos/videos to an internal SATA Solid State Drive (SSD) put this drive in a well-ventilated, air-conditioned bank "safety deposit box" for safe keeping The question: How long can I safely store a solid-state-drive in such an environment? i.e. 0% bitrot, 100% success when "plugged in" Are some SSD drives more reliable than other for this usecase? (e.g. smaller size vs larger size, SLC vs MLC, different brands, etc) More fodder: I have read that solid state memory cards (e..g compactflash, or sd cards) have much longer durability than other media (DVD's, CD's, hard drives) for this usecase (guaranteed against bitrot/other dysfunction on the order of ~ a decades vs a year ). I don't know if this applies to "SSD hard drives". Copying to one 500Gb ssd vs 8 64gb flash drives is easier SSD SATA hard drives have no moving parts, but they have more "visible electronics" than a compact flash card. I don't know if this "visible electronics" can fail, i.e. in contr I know many will point to carbonite, other cloud backup stuff, but I like the simplicity of having physical copies and wanted to understand the risks/implications thanks,

  Read the article

• nginx giving 404 when accessing php from alias directory

  - by code90

  I am trying to migrate from apache to nginx. The php sites that I am hosting need to access a shared library which turns out to be an alias directory. Below is the configuration I came up with. html files work fine, but php files giving 404. I have read through and tried most (if not all) of the answers to the similar questions with no any success. Any hint on what might be causing the issue in my case? location /wtlib/ { alias /var/www/shared/wtlib_4/; index index.php; } location ~ /wtlib/.*\.php$ { alias /var/www/shared/wtlib_4/; try_files $uri =404; if ($fastcgi_script_name ~ /wtlib(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass 127.0.0.1:9013; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/shared/wtlib_4$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } Thanks all ! Update: Following seems to be working fine: location /wtlib/ { alias /usr/share/php/wtlib_4/; location ~* .*\.php$ { try_files $uri @php_wtlib; } location ~* \.(html|htm|js|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air)$ { expires 7d; access_log off; } } location @php_wtlib { if ($fastcgi_script_name ~ /wtlib(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; }

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >