Search Results

Search found 21456 results on 859 pages for 'video memory'.

Page 402/859 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

• ATI HD5450 w/ Ubuntu 14?

  - by Oliwb

  So, I'm running Ubuntu 12.04 right now. Last night I realised that I'm way behind as we're up to 14! Decided to run the updater and figured I'd take the path of least resistance (but lengthy choice) of going 12.04 - 12.10 - 13.xx - 14.xx. So I download the first packet and then get an error message about my graphics card perhaps not working in 12.10. Now part of the reason I was looking to upgrade is because I get (and have always had) this strange occasional flickering - now that I have two screens it's just on the second monitor.....oddly this is not the same port that was giving issues before). The graphics card is an ATI Radeon HD5450 and I have the Catalyst (I think it's 13 or 14) driver installed - last night. It could be that the graphics card has never worked properly...I bought the PC new and with an "upgraded" video card and it's always suffered with this flicker. I just figured that the drivers weren't right or something. So I have 3 questions: 1) is my video card broken or is the driver letting it down and causing the flicker? 2) will it be able to handle the upgrade to 14 via 13? Or should I cut my losses and get something newer? 3) if I should get something newer....what should I get ( Thanks in advance....

  Read the article

• Image mapping using lookup tables [on hold]

  - by jblasius

  I have an optimization problem. I'm using a look-up table to map a pixel in an image: for (uint32_t index = 0u; index < imgSize; index++) { img[ lt[ index ] ] = val; } Is there a faster way to do this, perhaps using a reinterpret_cast or something like that? I am accessing two different memory addresses, so what is the compiler doing? One solution is to do a set of reads to access adjacent memory addresses. struct mblock { uint32_t buf[10u]; }; mblock mb; for (uint32_t index = 0u; index < imgSize; index += 10u) { mb = *reinterpret_cast<mblock*>(lt + index)); for (uint8_t i = 0u; i < 10u; i ++) { mb.buf[i] += img; } for (uint8_t i = 0u; i < 10u; i ++) { *( mb.buf[i] ) = val; } } This speeds up the code because I'm separating the image access from the table look-up; the positions in the look-up table are adjacent. I still get the image access problem as it is accessing random address positions.

  Read the article

• after BIOS splash, will not boot -- asks me to select an OS, but it just reboots

  - by user92040

  I'm running Linux Mint 13 MATE 64-bit. Everything has been working for several weeks. Yesterday, when I tried to boot up my computer, after the BIOS screen flashes I reach a screen with a black background that reads at the top: GNU GRUB version1.99-21ubuntu3.4 Then there is a box in which I can select from the following lines: Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) -- recovery mode Previous Linux versions Memory test (memtest86+) Memory test (memtest86+, serial console 115200) At the bottom it reads: Use the ? and ? keys to select which entry is highlighed. Press enter to boot the selected OS, 'e' to edit the commands before booting or 'c' for a command-line. I have no idea why it started doing this and, worse, I have no idea how to get out of here. No matter which option I select, I can't get it to boot the OS. If I select either of the first two, it reboots to splash the BIOS and then I'm right back where I started. If I choose "Previous Linux versions" I get essentially the same screen with only two choices (which are the same as the first two choices listed above, Linux 13 MATE and the recovery mode). Again, choosing either one of those results in a reboot. If I try to run either of the memtest options, it reads: error: unknown command 'linux16', Press any key to continue... Then it brings me back to the same screen Can anyone help me please? Intel Core i5-2500 ASUS P8Z68-V LX Intel Motherboard G. Skill Ripjaws series F3-12800CL9D-8GBRL (4GB x2) Plextor 128GB M5S Series SSD

  Read the article

• Storing images in file system and returning URLs or virtually resizing and returning byte arrays?

  - by ismaelf

  I need to create a REST web service to manage user submitted images and displaying them all in a website. There are multiple websites that are going to use this service to manage and display images. The requirements are to have 5 pre-defined image sizes available. The 2 options I see are the following: The web service will create the 5 images, store them in the file system and and store the URL's in the database when the user submits the image. When the image is requested, the web service will return an array of URLs. I see this option to be a little hard on the hard drive. The estimates are 10,000 users per site, and lets say, 100 sites. The heavy processing will be done when the user submits the image and each image is going to be pulled from the File System. The web service will store just the image that the user submits in the file system and it's URL in the database. When the user request images, the web service will get the info from the DB, load the image on memory, create its 5 instances and return an object with 5 image arrays (I will probably cache the arrays). This option is harder on the processor and memory. The heavy processing will be done when the images get requested. A plus I see for option 2 is that it will give me the option to rewrite the URL of the image and make them site dependent (prettier) than having a image repository for all websites. But this is not a big deal. What do you think of these options? Do you have any other suggestions?

  Read the article

• Isn't Java a quite good choice for desktop applications?

  - by tactoth

  At present most applications are still developed with C++, painfully. Lack of portability, in compatible libraries, memory leaks, slow compilation, and poor productivity. Even if you pick only a single from these shortages, it's still a big headache. However the surprising truth is that C++ remains the first choice for desktop applications. Compared to C++ Java has lots of advantages. The success in server side development shows that the language itself is good, Swing is also thought to be as programmer friendly as the highly recognized QT framework (No, never say even a single word about MFC!). All the disadvantages of C++ listed above has a solution in Java. "Performance!", Well that might still be the problem but to my experience it's a slight problem. I'd been using Java to decode some screen video and generate key frames. The video has a duration of more than 1 hour. The time spent on an average machine is just 1 minute. With C++ I don't expect even faster speed. In recent days there are many news on the JIT performance improvements, that make us feel Java is gradually becoming very suitable for desktop development, without people realizing it. Isn't it?

  Read the article

• News Applications internal working [on hold]

  - by Vijay

  How does news applications work other than RSS Feed based applications? I know some of them take the RSS content from the source site.But sometimes I see, those applications show - Title Description Date Image video etc. Even though when I see the original site's rss, image, video is not there in rss. So how does one get that to show in there applications? Some applications even shows feeds from magazine sites, newspaper sites. How do these applications work? I am creating an application which will link to different news sites feeds categorized (like top news, technology, games, articles etc.) On the front page it will show the website names, then on selection of any news site it will get the feed from that website and show it to user. So I would like to know All the fetching of data from should be done on user selection or data should be prefetched? Detailed information I want to fetch from the original like provided in the rss data. How should I go about it?

  Read the article

• How can I configure the touchpad and keyboard settings on a Dell Inspiron 5110?

  - by Robik

  I am using ubuntu 11.10. I want the following 3 things: I have dell inspiron 5110 laptop. There is button at the top right corner of laptop which can be used for turning the screen off. It works in windows but it does not work in ubuntu 11.10. Even in the manual of the laptop, it the button is supported only in windows. Is there a way to activate it in ubuntu 11.10? Some of the keys like: "break" etc. are missing. Can I use other keys (or combinations of other keys) to function as those missing keys? In the program, "mouse and touchpad", there is no tab for touchpad. I want to enable vertical and horizontal scrolling. How do I do that? The command: xinput list shows Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys Please help!!

  Read the article

• Android: Not able to experiment on own?

  - by user221287

  I have just started learning Android App Development a few days ago, with prior knowledge of C/C++, HTML and CSS. This is the situation I am facing Repeatedly: I am learning from a Video Tutorial Series, after each video, or each few videos, I say myself: Let's use what I have just learnt in the simple (and also "meaningless") app that I have made so far by watching the tutorials. I start implementing it, but then after a few minutes, I realize that I cannot do it because I do not know a few other syntax related to the particular thing, (or) I do not know whether these things can be combined with these other things by the use of . (dot). Whatever I try, I get either an error in eclipse or "Sorry...the app com.example.simple has stopped unexpectedly...." when the app runs. Then I search StackOverflow, Google and learn that what I want to implement requires learning about a few more classes, syntax and creating a few more java classes. I am not able to experiment on my own. Is it normal? Is it the HARD-WAY in which one is supposed to learn? Should I first learn Java and then come back to Android - would that be helpful?

  Read the article

• Best approach for tracking dependent state

  - by Pace

  Let's pretend I work on a project tracking application. The application is a database backed, server hosted, web application. In this application there are Projects which have many Activities which have many Tasks. A Task has two date fields an originalDueDate and a projectedDueDate. In addition, there are dynamic fields on the Activities and the Projects which indicate whether the Activity or Project is behind schedule based on the projected due dates of the child tasks and various other variables such as remaining buffer time, etc. There are a number of things that can cause the projectedDueDate to change. For example, an employee working on the project may (via a server request) enter in a shipping delay. Alternatively, a site may (via a server request) enter in an unexpected closure. When any of these things occur I need to not only update the projectedDueDate of the Task but also trigger the corresponding Project and Activity to update as well. What is the best way to do this? I've thought of the observer pattern but I don't keep a single copy of all these objects in memory. When a request comes in, I query the Task in from the database, at that point there is no associated Activity in memory that would be a listener. I could remove the ability to query for Tasks and force the application to query first by Project, then by Activity (in context of Project), then by task (in context of Activity) adding the observer relationships at each step but I'm not sure if that is the best way. I could setup a database event listening system so when a Task modified event is dispatched I have a handler which queries for the Activity at that point. I could simply setup a two-way relationship between Task and Activity so that the Task knows about the parent Activity and when the Task updates his state the Task grabs his parent and updates state. Right now I'm stuck considering all the options and am wondering if any single approach (doesn't have to be a listed approach) is jumping out at others as the best approach.

  Read the article

• Is it a good practice to create a list of definitions for all symbols and words in a programming language?

  - by MrDaniel

  After arriving at this point in Learning Python The Hard Way I am wondering if this is a good practice to create a list of symbols and define what they do as noted in bold below, for every programming language. This seems reasonable, and might be very useful to have when jumping between programming languages? Is this something that programmers do or is it just a waste of effort? Exercise 22: What Do You Know So Far? There won't be any code in this exercise or the next one, so there's no WYSS or Extra Credit either. In fact, this exercise is like one giant Extra Credit. I'm going to have you do a form of review what you have learned so far. First, go back through every exercise you have done so far and write down every word and symbol (another name for 'character') that you have used. Make sure your list of symbols is complete. Next to each word or symbol, write its name and what it does. If you can't find a name for a symbol in this book, then look for it online. If you do not know what a word or symbol does, then go read about it again and try using it in some code. You may run into a few things you just can't find out or know, so just keep those on the list and be ready to look them up when you find them. Once you have your list, spend a few days rewriting the list and double checking that it's correct. This may get boring but push through and really nail it down. Once you have memorized the list and what they do, then you should step it up by writing out tables of symbols, their names, and what they do from memory. When you hit some you can't recall from memory, go back and memorize them again.

  Read the article

• Wireless does not work 12.10

  - by superkoop

  My primary issue is that my wireless does not work after I installed 12.10. The output to rfkill list all: 5: hci0: Bluetooth Soft blocked: no Hard blocked: no The output to lshw -class network is: *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 12 serial: 00:21:9b:d6:46:51 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:fe8fc000-fe8fffff ioport:de00(size=256) *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:17 memory:fe7fc000-fe7fffff The output to lspci -nn for the pertinent information is: 0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Thus, it seems the solution would be to run: sudo apt-get install linux-headers-generic sudo apt-get install --reinstall bcmwl-kernel-source sudo modprobe wl However, I do not currently have access to an ethernet connection, as I am currently only able to use verizon wireless 3g internet. Thus, is there a way to set up ICS with a Vista machine so that I can access the internet by using the Vista machine as the host? Or, is it possible to fix this by downloading the important packages in vista and moving them to ubuntu via USB drive?

  Read the article

• After upgrade to 12.04 wireless keeps dropping on BCM4312

  - by Sheket

  I know there are plenty of questions very similar to these, but I've tried practically everything and it still isn't working. Some solutions get the wireless connection working, but it goes very slow and drops after a few minutes. Then it won't reconnect and keeps asking for password. Hope you can help me. Thanks in advance. This is the output for sudo lshw -C network *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:f0300000-f0303fff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: c0 serial: 00:23:5a:9b:6e:b1 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:f0200000-f023ffff ioport:a000(size=128) *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:24:2c:83:f0:81 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-30-generic firmware=478.104 link=no multicast=yes wireless=IEEE 802.11bg And for lsmod | grep b43 b43 342643 0 mac80211 436455 1 b43 cfg80211 178679 2 b43,mac80211 bcma 25651 1 b43 ssb 50691 1 b43 And for rfkill list 5: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Ubuntu 12.10 Quantal Quetzal and AMD 12.11 Beta Driver

  - by White

  I'm using a Quantal AMDx64 install and a XFX Radeon HD5850 video card. I first enabled restricted drivers through additional drivers, but it resulted in breaking Unity and Compiz (I can only see my wallpaper and shortcuts. But the terminal still works and Nautilus too, however, without Close/Maximize/Minimize and slower). Then I uninstalled it and everything went back to normal. Then I installed it via terminal (12.10 version), and the result was the same. Then I downloaded it via ATI's web site (12.11 beta) and installed the .run file using the terminal, but the result was yet again the same. Then I went to the terminal and entered these commands: sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* - It said it had nothing to uninstall sudo rm /ect/x11/xorg.conf - No such directory sudo dpkg-reconfigure xserver-xorg sudo startx sudo cp/ect/x11/xorg.conf.orig /ect/x11/xorg.conf - Also, no such directory sudo aticonfig --initial sudo reboot Then, I was presented with the log in screen, but when I tried to login (with my account), it flashed a black screen and then threw me back. Guest account still works (without unity and compiz, tough) and I can still use TTY. And I also got the "AMD Testing Only" watermark. Then I figured that I should stop messing with the terminal and get help before I unleashed Apocalypse XD. Side notes: My Ubuntu is installed on a ext4 partition with 60GB, and I dual boot with Windows 7 (at least for now). My internet is a 50kbps 3G-ish, so downloading even small files is a pain, let alone a video driver. I would rather not reinstall the O.S., it was a herculean task to download everything I had in there, and I have very little free disk space for backups. I'm still new to Ubuntu (I know some basic commands), and I don't know how to debug, so please, be patient XD And using Windows, my internet is even slower (is that possible?), so it kind of leaves a torture aftertaste xD. So, if you guys could answer quickly, it would be greatly appreciated. Thanks in advance. If you need any info, just ask (and explain how to get it XD).

  Read the article

• Is this too much to ask for a game programming and developing enthusiast? Am I doing this wrong?

  - by I_Question_Things_Deeply

  I have been a computer-fanatic for almost a decade now. I've always loved and wondered how computers work, even from the purest, lowest hardware level to the very smallest pixel on the screen, and all the software around that. That seems to be my problem though ... as I try to write code (I'm pretty fluent at C++) I always sit there enormous amounts of time in front of a text-editor wondering how every line, statement, datum, function, etc. will correspond to every Assembly and machine instruction performed to do absolutely everything necessary for the kernel to allocate memory to run my compiled program, and all of the other hardware being used as well. For example ... I would write cout << "Before memory changed" << endl; and run the debugger to get the Assembly for this, and then try and reverse disassemble the Assembly to machine code based on my ISA, and then research every .dll, library file, linked library, linking process, linker source code of the program, the make file, the kernel I'm using's steps of processing this compilation, the hardware's part aside from the processor (e.g. video card, sound card, chipset, cache latency, byte-sized registers, calling convention use, DDR3 RAM and disk drive, filesystem functioning and so many other things). Am I going about programming wrong? I mean I feel I should know everything that goes on underneath English syntax on a computer program. But the problem is that the more I research every little thing the less I actually accomplish at all. I can never finish anything because of this mentality, yet I feel compelled to know everything... what should I do?

  Read the article

• help me being the next zuckerberg [closed]

  - by Kraken

  I really expect someone to help me with my problem as stated below. I started learning website making by having tutorials from w3schools.com but after doing taking the HTML tutorials I don't think I really can do anything with it. Maybe I don't know everything about HTML yet. I know the online tutorials are not enough but what I need you guys to tell me is that how can I learn making some nice websites. I have vacations for two months now and I think it would be the best time for me to learn making websites as I really love to be a website developer. Now I would like to start from the scratch. I know some C language (though I know it will not help me). So tell me from where shall I learn HTML and what all things shall I learn after that and in what order. If you can also help me with the material (let it be books or online tutorials). But I would like to know how can I gain confidence that I can make some websites as just learning online tutorials doesn't help me much. I also tried some video tutorials but in that too, they will just tell me some of the functions and not all. So what am I supposed to do.. just know a limited functions as they want me to know in video tutorials or do something else.

  Read the article

• Random Access Violation Exception in WPF Application

  - by PT1984

  Hi, I am facing weird problem while running regression tests on my WPF Application. I am getting AccessViolationException with different stacktraces each time. First : Message :Attempted to read or write protected memory. This is often an indication that other memory is corrupt. StackTrace : at MS.Win32.PresentationCore.UnsafeNativeMethods.MILUnknown.Release(IntPtr pIUnkown) at MS.Win32.PresentationCore.UnsafeNativeMethods.MILUnknown.ReleaseInterface(IntPtr& ptr) at System.Windows.Media.SafeMILHandle.ReleaseHandle() at System.Runtime.InteropServices.SafeHandle.InternalFinalize() at System.Runtime.InteropServices.SafeHandle.Dispose(Boolean disposing) at System.Runtime.InteropServices.SafeHandle.Finalize() Source :PresentationCore Type : System.AccessViolationException. Second : Message :Attempted to read or write protected memory. This is often an indication that other memory is corrupt. StackTrace : at MS.Win32.PresentationCore.UnsafeNativeMethods.IMILBitmapEffect.GetOutput(SafeHandle THIS_PTR, UInt32 uiIndex, SafeMILHandle pContext, BitmapSourceSafeMILHandle& ppBitmapSource) at System.Windows.Media.Effects.BitmapEffect.GetOutput(SafeHandle unmanagedEffect, Int32 index, BitmapEffectRenderContext context) at System.Windows.Media.Effects.BitmapEffect.GetOutput(BitmapEffectInput input) at System.Windows.Media.Effects.BitmapEffectState.GetEffectOutput(Visual visual, RenderTargetBitmap& renderBitmap, Matrix worldTransform, Rect windowClip, Matrix& finalTransform) at System.Windows.Media.Effects.BitmapEffectVisualState.RenderBitmapEffect(Visual visual, Channel channel) at System.Windows.Media.Effects.BitmapEffectContent.ExecuteRealizationsUpdate() at System.Windows.Media.RealizationContext.RealizationUpdateSchedule.Execute() at System.Windows.Media.MediaContext.Render(ICompositionTarget resizedCompositionTarget) at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget) at System.Windows.Media.MediaContext.AnimatedRenderMessageHandler(Object resizedCompositionTarget) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter) at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.Run() at System.Windows.Application.RunDispatcher(Object ignore) at System.Windows.Application.RunInternal(Window window) at System.Windows.Application.Run(Window window) at System.Windows.Application.Run() at Main() Source :PresentationCore Type :System.AccessViolationException In Application Event Log I found following entries : Dispatcher processing has been suspended, but messages are still being processed. Faulting application **.exe, version 1.0.0.*, stamp 4c08d288, faulting module wpfgfx_v0300.dll, version 3.0.6920.1427, stamp 488f3056, debug? 0, fault address 0x0012ec36. My Application uses Dispatcher from another thread, to change the values of the controls , enable - disable those, change visibility etc., the thred is run multiple times in a second. Please let me know if anybody has faced this problem? Thanks in advance, -Prasad

  Read the article

• NHibernate which cache to use for WinForms application

  - by chiccodoro

  I have a C# WinForms application with a database backend (oracle) and use NHibernate for O/R mapping. I would like to reduce communication to the database as much as possible since the network in here is quite slow, so I read about second level caching. I found this quite good introduction, which lists the following available cache implementations. I'm wondering which implementation I should use for my application. The caching should be simple, it should not significantly slow down the first occurrence of a query, and it should not take much memory to load the implementing assemblies. (With NHibernate and Castle, the application already takes up to 80 MB of RAM!) Velocity: uses Microsoft Velocity which is a highly scalable in-memory application cache for all kinds of data. Prevalence: uses Bamboo.Prevalence as the cache provider. Bamboo.Prevalence is a .NET implementation of the object prevalence concept brought to life by Klaus Wuestefeld in Prevayler. Bamboo.Prevalence provides transparent object persistence to deterministic systems targeting the CLR. It offers persistent caching for smart client applications. SysCache: Uses System.Web.Caching.Cache as the cache provider. This means that you can rely on ASP.NET caching feature to understand how it works. SysCache2: Similar to NHibernate.Caches.SysCache, uses ASP.NET cache. This provider also supports SQL dependency-based expiration, meaning that it is possible to configure certain cache regions to automatically expire when the relevant data in the database changes. MemCache: uses memcached; memcached is a high-performance, distributed memory object caching system, generic in nature, but intended for use in speeding up dynamic web applications by alleviating database load. Basically a distributed hash table. SharedCache: high-performance, distributed and replicated memory object caching system. See here and here for more info My considerations so far were: Velocity seems quite heavyweight and overkill (the files totally take 467 KB of disk space, haven't measured the RAM it takes so far because I didn't manage to make it run, see below) Prevalence, at least in my first attempt, slowed down my query from ~0.5 secs to ~5 secs, and caching didn't work (see below) SysCache seems to be for ASP.NET, not for winforms. MemCache and SharedCache seem to be for distributed scenarios. Which one would you suggest me to use? There would also be a built-in implementation, which of course is very lightweight, but the referenced article tells me that I "(...) should never use this cache provider for production code but only for testing." Besides the question which fits best into my situation I also faced problems with applying them: Velocity complained that "dcacheClient" tag not specified in the application configuration file. Specify valid tag in configuration file," although I created an app.config file for the assembly and pasted the example from this article. Prevalence, as mentioned above, heavily slowed down my first query, and the next time the exact same query was executed, another select was sent to the database. Maybe I should "externalize" this topic into another post. I will do that if someone tells me it is absolutely unusual that a query is slowed down so much and he needs further details to help me.

  Read the article

• Samplegrabber works fine on AVI/MPEG files but choppy with WMV

  - by jomtois

  I have been using the latest version of the WPFMediaKit. What I am trying to do is write a sample application that will use the Samplegrabber to capture the video frames of video files so I can have them as individual Bitmaps. So far, I have had good luck with the following code when constructing and rendering my graph. However, when I use this code to play back a .wmv video file, when the samplegrabber is attached, it will play back jumpy or choppy. If I comment out the line where I add the samplegrabber filter, it works fine. Again, it works with the samplegrabber correctly with AVI/MPEG, etc. protected virtual void OpenSource() { FrameCount = 0; /* Make sure we clean up any remaining mess */ FreeResources(); if (m_sourceUri == null) return; string fileSource = m_sourceUri.OriginalString; if (string.IsNullOrEmpty(fileSource)) return; try { /* Creates the GraphBuilder COM object */ m_graph = new FilterGraphNoThread() as IGraphBuilder; if (m_graph == null) throw new Exception("Could not create a graph"); /* Add our prefered audio renderer */ InsertAudioRenderer(AudioRenderer); var filterGraph = m_graph as IFilterGraph2; if (filterGraph == null) throw new Exception("Could not QueryInterface for the IFilterGraph2"); IBaseFilter renderer = CreateVideoMixingRenderer9(m_graph, 1); IBaseFilter sourceFilter; /* Have DirectShow find the correct source filter for the Uri */ var hr = filterGraph.AddSourceFilter(fileSource, fileSource, out sourceFilter); DsError.ThrowExceptionForHR(hr); /* We will want to enum all the pins on the source filter */ IEnumPins pinEnum; hr = sourceFilter.EnumPins(out pinEnum); DsError.ThrowExceptionForHR(hr); IntPtr fetched = IntPtr.Zero; IPin[] pins = { null }; /* Counter for how many pins successfully rendered */ int pinsRendered = 0; m_sampleGrabber = (ISampleGrabber)new SampleGrabber(); SetupSampleGrabber(m_sampleGrabber); hr = m_graph.AddFilter(m_sampleGrabber as IBaseFilter, "SampleGrabber"); DsError.ThrowExceptionForHR(hr); /* Loop over each pin of the source filter */ while (pinEnum.Next(pins.Length, pins, fetched) == 0) { if (filterGraph.RenderEx(pins[0], AMRenderExFlags.RenderToExistingRenderers, IntPtr.Zero) >= 0) pinsRendered++; Marshal.ReleaseComObject(pins[0]); } Marshal.ReleaseComObject(pinEnum); Marshal.ReleaseComObject(sourceFilter); if (pinsRendered == 0) throw new Exception("Could not render any streams from the source Uri"); /* Configure the graph in the base class */ SetupFilterGraph(m_graph); HasVideo = true; /* Sets the NaturalVideoWidth/Height */ //SetNativePixelSizes(renderer); } catch (Exception ex) { /* This exection will happen usually if the media does * not exist or could not open due to not having the * proper filters installed */ FreeResources(); /* Fire our failed event */ InvokeMediaFailed(new MediaFailedEventArgs(ex.Message, ex)); } InvokeMediaOpened(); } And: private void SetupSampleGrabber(ISampleGrabber sampleGrabber) { FrameCount = 0; var mediaType = new AMMediaType { majorType = MediaType.Video, subType = MediaSubType.RGB24, formatType = FormatType.VideoInfo }; int hr = sampleGrabber.SetMediaType(mediaType); DsUtils.FreeAMMediaType(mediaType); DsError.ThrowExceptionForHR(hr); hr = sampleGrabber.SetCallback(this, 0); DsError.ThrowExceptionForHR(hr); } I have read a few things saying the the .wmv or .asf formats are asynchronous or something. I have attempted inserting a WMAsfReader to decode which works, but once it goes to the VMR9 it gives the same behavior. Also, I have gotten it to work correctly when I comment out the IBaseFilter renderer = CreateVideoMixingRenderer9(m_graph, 1); line and have filterGraph.Render(pins[0]); -- the only drawback is that now it renders in an Activemovie widow of its own instead of my control, however the samplegrabber functions correctly and without any skipping. So I am thinking the bug is in the VMR9 / samplegrabbing somewhere. Any help? I am new to this.

  Read the article

• boost::serialization of mutual pointers

  - by KneLL

  First, please take a look at these code: class Key; class Door; class Key { public: int id; Door *pDoor; Key() : id(0), pDoor(NULL) {} private: friend class boost::serialization::access; template <typename A> void serialize(A &ar, const unsigned int ver) { ar & BOOST_SERIALIZATION_NVP(id) & BOOST_SERIALIZATION_NVP(pDoor); } }; class Door { public: int id; Key *pKey; Door() : id(0), pKey(NULL) {} private: friend class boost::serialization::access; template <typename A> void serialize(A &ar, const unsigned int ver) { ar & BOOST_SERIALIZATION_NVP(id) & BOOST_SERIALIZATION_NVP(pKey); } }; BOOST_CLASS_TRACKING(Key, track_selectively); BOOST_CLASS_TRACKING(Door, track_selectively); int main() { Key k1, k_in; Door d1, d_in; k1.id = 1; d1.id = 2; k1.pDoor = &d1; d1.pKey = &k1; // Save data { wofstream f1("test.xml"); boost::archive::xml_woarchive ar1(f1); // !!!!! (1) const Key *pK = &k1; const Door *pD = &d1; ar1 << BOOST_SERIALIZATION_NVP(pK) << BOOST_SERIALIZATION_NVP(pD); } // Load data { wifstream i1("test.xml"); boost::archive::xml_wiarchive ar1(i1); // !!!!! (2) A *pK = &k_in; B *pD = &d_in; // (2.1) //ar1 >> BOOST_SERIALIZATION_NVP(k_in) >> BOOST_SERIALIZATION_NVP(d_in); // (2.2) ar1 >> BOOST_SERIALIZATION_NVP(pK) >> BOOST_SERIALIZATION_NVP(pD); } } The first (1) is a simple question - is it possible to pass objects to archive without pointers? If simply pass objects 'as is' that boost throws exception about duplicated pointers. But I'm confused of creating pointers to save objects. The second (2) is a real trouble. If comment out string after (2.1) then boost will corectly load a first Key object (and init internal Door pointer pDoor), but will not init a second Door (d_in) object. After this I have an inited *k_in* object with valid pointer to Door and empty *d_in* object. If use string (2.2) then boost will create two Key and Door objects somewhere in memory and save addresses in pointers. But I want to have two objects *k_in* and *d_in*. So, if I copy a values of memory objects to local variables then I store only addresses, for example, I can write code after (2.2): d_in.id = pD->id; d_in.pKey = pD->pKey; But in this case I store only a pointer and memory object remains in memory and I cannot delete it, because *d_in.pKey* will be unvalid. And I cannot perform a deep copy with operator=(), because if I write code like this: Key &operator==(const Key &k) { if (this != &k) { id = k.id; // call to Door::operator=() that calls *pKey = *d.pKey and so on *pDoor = *k.pDoor; } return *this; } then I will get a something like recursion of operator=()s of Key and Door. How to implement proper serialization of such pointers?

  Read the article

• How to associate newly created SurfaceHolder to MediaPlayer

  - by fayerth

  In my code, I want to be able to temporarily hide (and subsequently show) a video. I am using a SurfaceView + MediaPlayer combination instead of the VideoView due to requirements. However, I am facing difficulties in getting video playback to occur as expected after I show the SurfaceView. My code excerpts includes the following: public void show() { if (mSurface != null) mSurface.setVisibility(View.VISIBLE); } public void hide() { if (mSurface != null) { if (isInPlaybackState()) pause(); mSurface.setVisibility(View.INVISIBLE); } } @Override public void surfaceCreated(final SurfaceHolder holder) { mHolder = holder; openVideo(); } @Override public void surfaceDestroyed(final SurfaceHolder holder) { // After this, the surface can't be used again mHolder = null; } private void openVideo() { if (mAssetPath == null || !mAssetPath.isEmpty() || mHolder == null) { // Not ready yet; try again later return; } // Pause music playback service Intent i = new Intent("com.android.music.musicservicecommand"); i.putExtra("command", "pause"); getActivity().sendBroadcast(i); if (mPlayer == null) { initializePlayer(); } else { mPlayer.setDisplay(mHolder); } } Based on the above, when I call hide(), surfaceDestroyed(SurfaceHolder) gets triggered. When I later call show(), surfaceCreated(SurfaceHolder) gets triggered, which will call openVideo() and associate the player with the newly provided SurfaceHolder. The above works as expected, and I believe this should be the correct process; however, when I call mPlayer.start(), I would hear the video's audio playing without any video and see the following error messages (which eventually causes the media playback to stop and complete, as noted by the disconnect logs): 10-23 11:29:42.775: E/MediaPlayer(4204): Error (1,-2147483648) 10-23 11:29:42.795: E/MediaPlayer(4204): Error (-38,0) 10-23 11:29:42.805: E/MediaPlayer(4204): Error (1,-2147483648) 10-23 11:29:42.810: V/MediaPlayer(4204): message received msg=100, ext1=1, ext2=-2147483648 10-23 11:29:42.810: E/MediaPlayer(4204): error (1, -2147483648) 10-23 11:29:42.810: V/MediaPlayer(4204): callback application 10-23 11:29:42.810: V/MediaPlayer(4204): back from callback 10-23 11:29:42.825: E/MediaPlayer(4204): Error (1,-2147483648) 10-23 11:29:42.850: V/MediaPlayer-JNI(4204): getCurrentPosition: 671668 (msec) 10-23 11:29:42.850: V/MediaPlayer-JNI(4204): getCurrentPosition: 671668 (msec) 10-23 11:29:42.850: V/MediaPlayer(4204): message received msg=100, ext1=1, ext2=-2147483648 10-23 11:29:42.850: E/MediaPlayer(4204): error (1, -2147483648) 10-23 11:29:42.850: V/MediaPlayer(4204): callback application 10-23 11:29:42.850: V/MediaPlayer(4204): back from callback 10-23 11:29:42.875: V/MediaPlayer-JNI(4204): stop 10-23 11:29:42.875: V/MediaPlayer(4204): stop 10-23 11:29:42.875: E/MediaPlayer(4204): stop called in state 0 10-23 11:29:42.875: V/MediaPlayer(4204): message received msg=100, ext1=-38, ext2=0 10-23 11:29:42.875: E/MediaPlayer(4204): error (-38, 0) 10-23 11:29:42.875: V/MediaPlayer(4204): callback application 10-23 11:29:42.875: V/MediaPlayer(4204): back from callback 10-23 11:29:42.875: V/MediaPlayer-JNI(4204): reset 10-23 11:29:42.875: V/MediaPlayer(4204): reset 10-23 11:29:42.900: V/MediaPlayer-JNI(4204): release 10-23 11:29:42.900: V/MediaPlayer(4204): setListener 10-23 11:29:42.900: V/MediaPlayer(4204): disconnect 10-23 11:29:42.910: V/MediaPlayer(4204): destructor 10-23 11:29:42.910: V/MediaPlayer(4204): disconnect Has anyone encountered this issue before and found a workaround? Or would the only option be to create a new MediaPlayer as well?

  Read the article

• How do I maximize code coverage?

  - by naivedeveloper

  Hey all, the following is a snippet of code taken from the unix ptx utility. I'm attempting to maximize code coverage on this utility, but I am unable to reach the indicated portion of code. Admittedly, I'm not as strong in my C skills as I used to be. The portion of code is indicated with comments, but it is towards the bottom of the block. if (used_length == allocated_length) { allocated_length += (1 << SWALLOW_REALLOC_LOG); block->start = (char *) xrealloc (block->start, allocated_length); } Any help interpreting the indicated portion in order to cover that block would be greatly appreciated. /* Reallocation step when swallowing non regular files. The value is not the actual reallocation step, but its base two logarithm. */ #define SWALLOW_REALLOC_LOG 12 static void swallow_file_in_memory (const char *file_name, BLOCK *block) { int file_handle; /* file descriptor number */ struct stat stat_block; /* stat block for file */ size_t allocated_length; /* allocated length of memory buffer */ size_t used_length; /* used length in memory buffer */ int read_length; /* number of character gotten on last read */ /* As special cases, a file name which is NULL or "-" indicates standard input, which is already opened. In all other cases, open the file from its name. */ bool using_stdin = !file_name || !*file_name || strcmp (file_name, "-") == 0; if (using_stdin) file_handle = STDIN_FILENO; else if ((file_handle = open (file_name, O_RDONLY)) < 0) error (EXIT_FAILURE, errno, "%s", file_name); /* If the file is a plain, regular file, allocate the memory buffer all at once and swallow the file in one blow. In other cases, read the file repeatedly in smaller chunks until we have it all, reallocating memory once in a while, as we go. */ if (fstat (file_handle, &stat_block) < 0) error (EXIT_FAILURE, errno, "%s", file_name); if (S_ISREG (stat_block.st_mode)) { size_t in_memory_size; block->start = (char *) xmalloc ((size_t) stat_block.st_size); if ((in_memory_size = read (file_handle, block->start, (size_t) stat_block.st_size)) != stat_block.st_size) { error (EXIT_FAILURE, errno, "%s", file_name); } block->end = block->start + in_memory_size; } else { block->start = (char *) xmalloc ((size_t) 1 << SWALLOW_REALLOC_LOG); used_length = 0; allocated_length = (1 << SWALLOW_REALLOC_LOG); while (read_length = read (file_handle, block->start + used_length, allocated_length - used_length), read_length > 0) { used_length += read_length; /* Cannot cover from this point...*/ if (used_length == allocated_length) { allocated_length += (1 << SWALLOW_REALLOC_LOG); block->start = (char *) xrealloc (block->start, allocated_length); } /* ...to this point. */ } if (read_length < 0) error (EXIT_FAILURE, errno, "%s", file_name); block->end = block->start + used_length; } /* Close the file, but only if it was not the standard input. */ if (! using_stdin && close (file_handle) != 0) error (EXIT_FAILURE, errno, "%s", file_name); }

  Read the article

• Intrinsics program (SSE) - g++ - help needed

  - by Sriram

  Hi all, This is the first time I am posting a question on stackoverflow, so please try and overlook any errors I may have made in formatting my question/code. But please do point the same out to me so I may be more careful. I was trying to write some simple intrinsics routines for the addition of two 128-bit (containing 4 float variables) numbers. I found some code on the net and was trying to get it to run on my system. The code is as follows: //this is a sample Intrinsics program to add two vectors. #include <iostream> #include <iomanip> #include <xmmintrin.h> #include <stdio.h> using namespace std; struct vector4 { float x, y, z, w; }; //functions to operate on them. vector4 set_vector(float x, float y, float z, float w = 0) { vector4 temp; temp.x = x; temp.y = y; temp.z = z; temp.w = w; return temp; } void print_vector(const vector4& v) { cout << " This is the contents of vector: " << endl; cout << " > vector.x = " << v.x << endl; cout << " vector.y = " << v.y << endl; cout << " vector.z = " << v.z << endl; cout << " vector.w = " << v.w << endl; } vector4 sse_vector4_add(const vector4&a, const vector4& b) { vector4 result; asm volatile ( "movl $a, %eax" //move operands into registers. "\n\tmovl $b, %ebx" "\n\tmovups (%eax), xmm0" //move register contents into SSE registers. "\n\tmovups (%ebx), xmm1" "\n\taddps xmm0, xmm1" //add the elements. addps operates on single-precision vectors. "\n\t movups xmm0, result" //move result into vector4 type data. ); return result; } int main() { vector4 a, b, result; a = set_vector(1.1, 2.1, 3.2, 4.5); b = set_vector(2.2, 4.2, 5.6); result = sse_vector4_add(a, b); print_vector(a); print_vector(b); print_vector(result); return 0; } The g++ parameters I use are: g++ -Wall -pedantic -g -march=i386 -msse intrinsics_SSE_example.C -o h The errors I get are as follows: intrinsics_SSE_example.C: Assembler messages: intrinsics_SSE_example.C:45: Error: too many memory references for movups intrinsics_SSE_example.C:46: Error: too many memory references for movups intrinsics_SSE_example.C:47: Error: too many memory references for addps intrinsics_SSE_example.C:48: Error: too many memory references for movups I have spent a lot of time on trying to debug these errors, googled them and so on. I am a complete noob to Intrinsics and so may have overlooked some important things. Any help is appreciated, Thanks, Sriram.

  Read the article

• SurfaceView drawn on top of other elements after coming back from specific activity

  - by spirytus

  I have an activity with video preview displayed via SurfaceView and other views positioned over it. The problem is when user navigates to Settings activity (code below) and comes back then the surfaceview is drawn on top of everything else. This does not happen when user goes to another activity I have, neither when user navigates outside of app eg. to task manager. Now, you see in code below that I have setContentVIew() call wrapped in conditionals so it is not called every time when onStart() is executed. If its not wrapped in if statements then all works fine, but its causing loosing lots of memory (5MB+) each time onStart() is called. I tried various combinations and nothing seems to work so any help would be much appreciated. @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); //Toast.makeText(this,"Create ", 2000).show(); // set 32 bit window (draw correctly transparent images) getWindow().getAttributes().format = android.graphics.PixelFormat.RGBA_8888; // set the layout of the screen based on preferences of the user sharedPref = PreferenceManager.getDefaultSharedPreferences(this); } public void onStart() { super.onStart(); String syncConnPref = null; syncConnPref = sharedPref.getString("screensLayouts", "default"); if(syncConnPref.contentEquals("default") && currentlLayout!="default") { setContentView(R.layout.fight_recorder_default); } else if(syncConnPref.contentEquals("simple") && currentlLayout!="simple") { setContentView(R.layout.fight_recorder_simple); } // I I uncomment line below so it will be called every time without conditionals above, it works fine but every time onStart() is called I'm losing 5+ MB memory (memory leak?). The preview however shows under the other elements exactly as I need memory leak makes it unusable after few times though // setContentView(R.layout.fight_recorder_default); if(getCamera()==null) { Toast.makeText(this,"Sorry, camera is not available and fight recording will not be permanently stored",2000).show(); // TODO also in here put some code replacing the background with something nice return; } // now we have camera ready and we need surface to display picture from camera on so // we instantiate CameraPreviw object which is simply surfaceView containing holder object. // holder object is the surface where the image will be drawn onto // this is where camera live cameraPreview will be displayed cameraPreviewLayout = (FrameLayout) findViewById(id.camera_preview); cameraPreview = new CameraPreview(this); // now we add surface view to layout cameraPreviewLayout.removeAllViews(); cameraPreviewLayout.addView(cameraPreview); // get layouts prepared for different elements (views) // this is whole recording screen, as big as screen available recordingScreenLayout=(FrameLayout) findViewById(R.id.recording_screen); // this is used to display sores as they are added, it displays like a path // each score added is a new text view simply and as user undos these are removed one by one allScoresLayout=(LinearLayout) findViewById(R.id.all_scores); // layout prepared for controls like record/stop buttons etc startStopLayout=(RelativeLayout) findViewById(R.id.start_stop_layout); // set up timer so it can be turned on when needed //fightTimer=new FightTimer(this); fightTimer = (FightTimer) findViewById(id.fight_timer); // get views for displaying scores score1=(TextView) findViewById(id.score1); score2=(TextView) findViewById(id.score2); advantages1=(TextView) findViewById(id.advantages1); advantages2=(TextView) findViewById(id.advantages2); penalties1=(TextView) findViewById(id.penalties1); penalties2=(TextView) findViewById(id.penalties2); RelativeLayout welcomeScreen=(RelativeLayout) findViewById(id.welcome_screen); Animation fadeIn = AnimationUtils.loadAnimation(this, R.anim.fade_in); welcomeScreen.startAnimation(fadeIn); Toast.makeText(this,"Start ", 2000).show(); animateViews(); } Settings activity is below, after coming back from this activity surfaceview is drawn on top of other elements. public class SettingsActivity extends PreferenceActivity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); if(MyFirstAppActivity.getCamera()==null) { Toast.makeText(this,"Sorry, camera is not available",2000).show(); return; } addPreferencesFromResource(R.xml.preferences); } }

  Read the article

• wordexp followed by strcpy = EXC_BAD_ACCESS + sharedlibrary apply-load-rules-all

  - by fyngyrz

  The implication is a memory problem. I have static allocations for these: char akdir[400]; char homedir[400]; This crashes on the first strcpy(): void setuplibfoo() { long ii; double x; wordexp_t result; // This obtains the user's home directory // -------------------------------------- homedir[0]=0; // in case wordexp fails switch (wordexp("~/",&result,0)) { case 0: // Successful. We'll fall into deallocate when done. { strcpy(homedir,result.we_wordv[0]); // <<--- CRASH! strcpy(akdir,homedir); strcat(akdir,"ak-plugins/"); vs_status(akdir); } case WRDE_NOSPACE: // If the error was WRDE_NOSPACE, then { // perhaps part of the result was allocated. wordfree (&result); } default: // all other errors do not require deallocation { break; } } ...additional code clipped.. doesn't get there on crash. This is in a shared library I've written that is linked to my application, also something I've written. In this case, it doesn't get very far, although if it starts, it's fine. ...I've read the wordexp docs several times; they say they allocate new objects, so you just set up that type and call them with the address. The switch error model is right from the wordexp docs: http://www.gnu.org/s/libc/manual/html_mono/libc.html#Wordexp-Example It doesn't always crash. Just sometimes, and just under 10.6. Never under 10.5 I'm building debug mode with XCode 3.1.1, under OSX 10.5.8 it seems to run ok, I've not seen a crash -- under 10.6, it crashes... sometimes. But always with that same exception, and always in the same place. The Google has it that this actually means, somehow, that it's too soon to allocate memory. But all the instances I could find were memory errors on the part of the programmer. Overruns, etc. And I can't find any docs on when it IS safe to allocate memory. Now, the path that expands there is nowhere near 400 characters. it's this (it it completes): /Users/flake/ak-plugins/ and this: /Users/flake/ ...if it doesn't. the strcpy... copies 2nd param to first. Theirs to mine. And it works! under 10.5. :/ So is wordexp broke? Is 10.6 broke? Am I cRaZy? Here's the debugger output: 0x00013446 <+0049> call 0xc98da <dyld_stub_wordexp> 0x0001344b <+0054> test %eax,%eax 0x0001344d <+0056> je 0x13454 <setuplibfoo+63> 0x0001344f <+0058> jmp 0x134da <setuplibfoo+197> 0x00013454 <+0063> mov -0x1c(%ebp),%eax 0x00013457 <+0066> mov (%eax),%eax 0x00013459 <+0068> mov %eax,0x4(%esp) 0x0001345d <+0072> lea 0xb6cc2(%ebx),%eax 0x00013463 <+0078> mov (%eax),%eax 0x00013465 <+0080> mov %eax,(%esp) 0x00013468 <+0083> call 0xc9898 <dyld_stub_strcpy> 0x0001346d <+0088> lea 0xb6cc2(%ebx),%eax <<--CRASH!

  Read the article

• jQuery embedding youtube IE issue

  - by webmonkey237

  I have been working on a custom image slider featured here: JQuery $(function(){ $('.cont:gt(0)').hide(); $("#parent").on("mouseenter", ".extraContent div", function(){ var ind = $(this).index(); $("#parent").find(".cont").stop().fadeTo(600,0,function(){ $('#parent').find('.cont').eq(ind).stop().fadeTo(300,1); }); }); $('#parent .extraContent').on('click',function(){ window.location=$(this).find("a").attr("href"); return false; }); }); CSS ?#parent { width:400px; margin:auto} .mainContent { width:430px; height:300px; border:1px solid #000;padding:5px; } .extraContent {overflow:auto; width:450px;} .extraContent div{float:left; width:90px; height:90px; border:1px solid #00F; margin:5px; padding:5px } .extraContent div:hover { border:1px solid #0F0;cursor:pointer } .cont{ position:absolute; } HTML <div id="parent"> <div class="mainContent"> <div class="cont"> Content 1....</div> <div class="cont"> Content 2....</div> <div class="cont">Content 3...<br /><iframe width="267" height="200" src="http://www.youtube.com/embed/6tlQn7iePV4?rel=0" frameborder="0" allowfullscreen></iframe></div> <div class="cont"> Content 4....</div> </div> <div class="extraContent"> <div><p>1 Custom content here <br /> <a href="">Some link</a></p></div> <div><p>2 Custom content here <br /> <a href="">Some link</a></p></div> <div><p>3 Custom content here <br /> <a href="">Some link</a></p></div> <div><p>4 Custom content here <br /> <a href="">Some link</a></p></div> </div> </div>? My problem is if I embed YouTube video straight from the site using there iframe it transitions fine in Chrome but Firefox & IE just display the video straight away and each slide/div appears under the video, is this a known problem and doesn't anyone know a way I can get IE & FF to behave. p.s. because this is going to be in a content management system the only way the user can embed the video is using the default code from youtube. FIDDLE HERE

  Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >