Search Results

Search found 21456 results on 859 pages for 'video memory'.

Page 399/859 | < Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >

• wireless is disabled by hardware lenovo 3000g430

  - by sudheer

  sir i have problem with my wifi switch sir please tell me solution for my problem (wifi is disabled by hardware). output of sudo lshw -C network is sudo] password for sudheer: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: eth2 version: 01 serial: 00:21:00:72:3a:93 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:19 memory:f4700000-f4703fff *-network description: Ethernet interface product: NetLink BCM5906M Fast Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 02 serial: 00:1e:68:ad:24:0b size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=sb v3.04 ip=172.16.52.79 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:47 memory:f4600000-f460ffff output of iwconfig is lo no wireless extensions. eth2 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. sudheer@sudheer:~$ sudo iwlistscanning sudo: iwlistscanning: command not found ***sudheer@sudheer:~$ sudo iwlist scanning*** lo Interface doesn't support scanning. eth2 Failed to read scan data : Invalid argument eth0 Interface doesn't support scanning.

  Read the article

• Lubuntu 12.04 on Acer laptop boots to blank blue screen

  - by WGCman

  My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

  Read the article

• What data should be cached in a multiplayer server, relative to AI and players?

  - by DevilWithin

  In a virtual place, fully network driven, with an arbitrary number of players and an arbitrary number of enemies, what data should be cached in the server memory, in order to optimize smooth AI simulation? Trying to explain, lets say player A sees player B to E, and enemy A to G. Each of those players, see player A, but not necessarily each other. Same applies to enemies. Think of this question from a topdown perspective please. In many cases, for example, when a player shoots his gun, the server handles the sound as a radial "signal" that every other entity within reach "hear" and react upon. Doing these searches all the time for a whole area, containing possibly a lot of unrelated players and enemies, seems to be an issue, when the budget for each AI agent is so small. Should every entity cache whatever enters and exits from its radius of awareness? Is there a great way to trace the entities close by without flooding the memory with such caches? What about other AI related problems that may arise, after assuming the previous one works well? We're talking about environments with possibly hundreds of enemies, a swarm.

  Read the article

• How do I disable touchpad tap to click?

  - by AWE

  You've heard this a million times but the "tap to click" is a pain in the behind and I want to disable it. There is no touchpad in gpointing-device-settings and neither in mouse and touchpad in system settings. I've tried some commands in terminal but it's all crap. Dconf-editor doesn't react. How about solving this once and for all? xinput list: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys id=14 [slave keyboard (3)]

  Read the article

• Field symbol and Data reference in SAP-ABAP

  - by PDP-21

  If we compare field symbol and data refernece with that of the pointer in C i concluded that :- In C language, Say we declare a variable "var" type "Integer" with default value "5". The variable "var" will be stored some where in the memory and say the memory address which holds this variable is "1000". Now we define a pointer "ptr" and this pointer is assigned to our variable. So, "&ptr" will be "1000" and " *ptr " will be 5. Lets comapre the above situation in SAP ABAP. Here we declare a Field symbol "FS" and assign that to the variable "var". Now my question is what "FS" holds ? I have searched this rigorously in the internet but found out many ABAP consultants have the opinion that FS holds the address of the variable i.e. 1000. But that is wrong. While debugging i found out that fs holds only 5. So fs (in ABAP) is equivalent to *ptr (in C). Please correct me if my understanding is wrong. Now lets declare a data reference "dref" and another filed symbol "fsym" and after creating the data reference we assign the same to field symbol . Now we can do operations on this field symbol. So the difference between data refernec and field symbol is :- in case of field symbol first we will declare a variable and assign it to a field symbol. in case of data reference first we craete a data reference and then assign that to field symbol. Then what is the use of data reference? The same functionality we can achive through field symbol also.

  Read the article

• Resolution changes when using switch

  - by Edward D

  So, the "real" resolution of my monitor is 1024x768. That's what I'd use on my docked Windows laptop, and what I'd use on my Xubuntu desktop connected directly. When I connect a switch, to switch between the two, however, the ubuntu machine's resolution changes. Everything's still proportional, and it still thinks it's doing 1024x768, but the icons and fonts appear larger. Not 800x600 larger, but still big. When I used Xubuntu Precise, I created an xorg.conf file to set a resolution of 1280x1024 which made it look the way it does without the switch ... as a workaround. When I upgraded to Trusty, I lost this. I tried to re-create it, but doesn't seem to load my file. Ideally, I'd like to correct the original problem, but I'd settle for being able to up the resolution. I searched for a while, and tried to do it, but I'm giving up ... please help me out. Controller: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04) Monitor: NEC MultiSync LCD 1850e http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf OS: Xubuntu 14.04 Trusty /etc/X11/xorg.conf: # YOU CREATED THIS FILE # sudo leafpad /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "NEC LCD1850E" # I found Synchronization Range at: # http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf HorizSync 31.0-82.0 VertRefresh 55.0-85.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "NEC LCD1850E" Device "Configured Video Device" SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1024x768" "800x600" "848x480" "640x480" EndSubSection EndSection

  Read the article

• Help setting up wireless in Ubuntu 13.04

  - by James

  I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

  Read the article

• Deleting Unused Swaps Partions

  - by Nikita Kononov

  Good evening everyone , I got a little issue with Swap Partitions. Due to some issues after installing Ubuntu first time, I reinstalled it and now I have 3 Swaps. Here is sudo fdisk -l result Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xaa9693fe Device Boot Start End Blocks Id System /dev/sda1 2048 52430847 26214400 1c Hidden W95 FAT32 (LBA) /dev/sda2 * 52430848 540677076 244123114+ 7 HPFS/NTFS/exFAT /dev/sda3 540678142 1465147391 462234625 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 1452750848 1465147391 6198272 82 Linux swap / Solaris /dev/sda6 1440352256 1452742655 6195200 82 Linux swap / Solaris /dev/sda7 540678144 1427951615 443636736 83 Linux /dev/sda8 1427953664 1440339967 6193152 82 Linux swap / Solaris So Swaps in /dev/sda5 and /dev/sda6 are no longer in use as far as I understand and thus I was planning to delete them, however faced a problem. What I did is download and burn Gparted Live CD and boot it up, tried to delete those partitions but I have no idea how to add 12GB unallocated memory to the existing OS partition in this case to /dev/sda7 Is there anyway I can delete 2 swaps and extend unallocated memory to /dev/sda7 partion? Thank you in advance!

  Read the article

• Using 12.04 installation as a persistent pen drive

  - by Cawas

  Disclaimer: I aim to build a self contained pen drive with my application inside, so no matter about updates. Maybe I'm looking at the wrong linux distribution to do this... Please let me know if you think so. I've tried knoppix and even lubuntu, but they don't come with enough "drivers" for Unity3D to work. Creating a custom live persistent pen drive is a real pain and I'm trying for 1 day without any success. Sure, being able to do it would probably be ideal and occupy the minimum space. Using the installation image on a pen drive, however, is good enough and is really easy to create. We can even do it from any OS, using UNetBootin, LiLi USB Creator or some other methods. Straight forward. Some recommend installing it on a pen drive. But that requires a lot of space and, I believe, it won't behave as good as something meant to be installed on a usb disk, because of memory management. So, there are only a few negative points on using the installation image that I can think of. Question here, is how to remove those drawbacks: Having to press "Try Ubuntu". That's the big one. Couldn't find how. Unable to load everything on memory and keep on running without the pen drive (like this) Unable to remove "Install Ubuntu 12.04 LTS" app. Setting the ISO to use maximum amount of space for the OS will leave pen drive with zero space left and any file saved within it from ubuntu is inaccessible from the outside (when plugin the pen drive and not booting from it). Am I missing something? Can those points be fixed?

  Read the article

• Terminal closing itself after 14.04 upgrade

  - by David

  All was fine in 12.04, in this case I'm using virtualbox in Windows. Last days the warning message about my Ubuntu version no longer being supported was coming up pretty often, so, yesterday I finally decided to upgrade. The upgrading process ran ok, no errors, no warnings. After rebooting the errors started to happen. Just after booting up there were some errors about video, gnome, and video textures (sorry I didn't care in that moment so I don't remember well). Luckly that went away after installing VirtualBox additions. But the big problem here is that I can't use the terminal. It opens Ok when pressing control+alt+t, but most of the commands cause instant closing. For example, df, ls, mv, cd... usually work, although it has closed few times. But 'find' causes instant close. 'apt-get' update kills it too, just after it gets the package list from the sources, when it starts processing them. I've tried xterm, everything works and I have none of that problems. I have tried reinstalling konsole, bash-static, bash-completion, but nothing worked. I have no idea what to do as there is no error message to search for the cause. It seems something related to bash, but that's all I know.

  Read the article

• Problems with microphone and network

  - by AnoonymoouS

  Hello... very good day everybody! I'm having some problems regarding the Ubuntu 12.4.01 LTS. For this reason, cordially i ask everyone's help. Such problems can be summed up in network (01) and audio (02)! 01) I can not set a DSL network settings in the "upper bar" (on side the clock). When i create the connection, the system says that the cables modem are disconnected! I can only use the internet if i set up a connection at terminal through the command "pppoeconf". Follows the print screen of what i mentioned above:. http://i.imgur.com/8nTrF.png Obs.: Note that even after the connection "created", it does not appear there! 02) The sound is reproduced; however, can not be captured! I can not make recordings, obviously i can't use the microphone. I believe that something is giving interference or the settings are wrong! Follows the video of what i mentioned above:. http://dl.dropbox.com/u/41085750/Projeto%20Padr%C3%A3o.mp4 Obs.: I'm listening to music, so that interference errors may appear in the video. By kindness; who can help me... help me! I sought help at various sites and forums but unfortunately, i did not get success. I wait anxiously for a direction. Regards, Anoonymoous.

  Read the article

• Graph data structures and journal format for mini-IDE

  - by matec

  Background: I am writing a small/partial IDE. Code is internally converted/parsed into a graph data structure (for fast navigation, syntax-check etc). Functionality to undo/redo (also between sessions) and restoring from crash is implemented by writing to and reading from journal. The journal records modifications to the graph (not to the source). Question: I am hoping for advice on a decision on data-structures and journal format. For the graph I see two possible versions: g-a Graph edges are implemented in the way that one node stores references to other nodes via memory address g-b Every node has an ID. There is an ID-to-memory-address map. Graph uses IDs (instead of addresses) to connect nodes. Moving along an edge from one node to another each time requires lookup in ID-to-address map. And also for the journal: j-a There is a current node (like current working directory in a shell + file-system setting). The journal contains entries like "create new node and connect to current", "connect first child of current node" (relative IDs) j-b Journal uses absolute IDs, e.g. "delete edge 7 - 5", "delete node 5" I could e.g. combine g-a with j-a or combine g-b with j-b. In principle also g-b and j-a should be possible. [My first/original attempt was g-a and a version of j-b that uses addresses, but that turned out to cause severe restrictions: nodes cannot change their addresses (or journal would have to keep track of it), and using journal between two sessions is a mess (or even impossible)] I wonder if variant a or variant b or a combination would be a good idea, what advantages and disadvantages they would have and especially if some variant might be causing troubles later.

  Read the article

• Huwawei E220 broadband dongle not working

  - by Roshnal

  The problem is, I have used Ubuntu from 6.10 upto 11.10. And upto 11.04 I used my same USB 3G dongle to connect to broadband and it worked fine. But 2 days ago I upgraded to Ubuntu 11.10 and broadband is not working. It detects my dongle and creates a connection without a problem, but when connecting it just keeps on and on for a long time and then say I'm offline. So I did a clean install and the same thing occurred. But I also have a netbook and its got Ubuntu 11.10. I tried using the same dongle for internet on that netbook and it worked fine without any issues. But this isn't a problem with my USB port on my main machine or something like that because I'm also using Windows on my main machine (dual-boot) and its working fine. My hardware: Main computer (one that I'm trying to connect): 2.8GHz dual core Intel 2GB RAM 500GB Sata II HDD 384MB Video Memory (Intel G31/G33 chipset) Ubuntu 11.10 (32bit) My NetBook (broadband working fine): 1.6GHz Intel Atom (dual core) 1GB DDR3 RAM 250GB HDD 128MB Video Memory (Intel something-I-can't-remember) Ubuntu 11.10 (32bit) My dongle is a Huawei E220 and ISP is Dialog GSM (I'm in Sri Lanka) So any idea why this is? I really love Ubuntu and this is bugging me off.. Any help greatly appreciated. Regards, Roshnal

  Read the article

• dual monitors and unity - ati radeon cards

  - by michiel

  I have a vaio laptop with an ATI Radeon video card and an external screen. I used to run dual monitors on Ubuntu 10.10 fine, but recently decided to upgrade to 11.10 via 11.04 I don't think it's the video card or the fglrx driver. It seems to be unity. When I start up, the laptop screen is normal and the external screen is all white, although I can move my mouse over it. However, the cursor becomes the big X that used to be cursor of the first versions of Xwindows. I can right click on it, and it brings up the context menu for the desktop. And then, all of a sudden, it shows my desktop background. I can continue to move my mouse over the external screen, and now the cursor is normal (little white arrow). But I can't do anything any longer (not even the context menu as before), and trying to drag a window to it (which always worked on 10.10) doesn't work. I actually really like unity. It gives me the most our of my desktop, and uses all space available, which is great. But how can I get my second screen back? I tried unity 2D, but the result is the same. Edit: I think I stumbled on this bug: https://bugs.launchpad.net/ubuntu/+source/nvidia-settings/+bug/882143

  Read the article

• design in agile process

  - by ying

  Recently I had an interview with dev team in a company. The team uses agile + TDD. The code exercise implements a video rental store which generates statement to calc total rental fee for each type of video (new release, children, etc) for a customer. The existing code use object like: Statement to generate statement and calc fee where big switch statement sits to use enum to determine how to calc rental fee customer holds a list of rentals movie base class and derived class for each type of movie (NEW, CHILDREN, ACTION, etc) The code originally doesn't compile as the owner was assumed to be hit by a bus. So here is what I did: outlined the improvement over object model to have better responsibility for each class. use strategy pattern to replace switch statement and weave them in config But the team says it's waste of time because there is no requirement for it and UAT test suite works and is the only guideline goes into architecture decision. The underlying story is just to get pricing feature out and not saying anything about how to do it. So the discussion is focused on why should time be spent on refactor the switch statement. In my understanding, agile methodology doesn't mean zero design upfront and such code smell should be avoided at the beginning. Also any unit/UAT test suite won't detect such code smell, otherwise sonar, findbugs won't exist. Here I want to ask: is there such a thing called agile design in the agile methodology? Just like agile documentation. how to define agile design upfront? how to know enough is enough? In my understanding, ballpark architecture and data contract among components should be defined before/when starting project, not the details. Am I right? anyone can explain what the team is really looking for in this kind of setup? is it design aspect or agile aspect? how to implement minimum viable product concept in the agile process in the real world project? Is it must that you feel embarrassed to be MVP?

  Read the article

• A Quarter Century of SPARC

  - by kemer

  You might have missed an interesting milestone: the 25th anniversary of SPARC. Twenty-five years! Almost 40% of my life: humbling, maybe a little scary. When I joined Sun Microsystems in 1988, SPARC was just starting to shake things up. The next year we introduced the SPARCstation 1, which had basically triple the performance of our Motrolla-based Sun–3 systems. Not too long after that, our competition began a campaign of “SPARC is dead.” We really distressed them with our success, in spite of our small size. “It won’t last.” “It can’t last!” So they told themselves. For a stroll down memory lane take a look at this page. I remember the sales meeting we had in Atlanta to internally announce the SPARCstation 1. Sun hadn’t really hit the big times, yet. Our much bigger competitors viewed us as an ill-mannered pest, certain of our demise. And, why wouldn’t they be certain: other startups more our size, such as Apollo (remember them?), Silicon Graphics (they fought the good fight!), and the incredibly cool Symbolics are memories. Wait! There was also a BIG company, DEC, who scoffed at us: they are history, too. In fact, we really upset them with what was supposed to be an internal-only video production that was a take-off on Bruce Lee movies, in which we battled the evil Doctor DEC – complete with computer mice (or is that “mouses”?) wielded like nun chucks with the new SPARCstation 1 somehow in the middle of everything. The memory is vivid, but the details hazy. After all, that was almost a quarter century ago. So, here’s to Oracle’s SPARC: still going strong after all these years. – Kemer

  Read the article

• Netbook Remix 10.04 to 10.10 upgrade using alternate iso

  - by Suman Subramonian

  I'm using Netbook Remix 10.04 now. I'm having the 10.10 alternate iso with me. If I use that iso to upgrade, will I lose my netbook version? I've seen in some forums that the upgrade resulted in a change from netbook version to desktop version. Updated on 15/12/2010 I upgraded the OS from 10.04 to 10.10. But I'm getting an error like this after restart: modprobe: FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory I searched in the forums and got a solution like this: Open Terminal gksudo gedit /etc/initramfs-tools/initramfs.conf change the line MODULES=most to MODULES=dep Then use Synaptic (SystemAdministrationSynaptic Package Manager) to reinstall initramfs-tools. I'll be definitely trying this later. After that when the system tries to login, my screen starts flashing with just the ubuntu netbook desktop wallpaper on the screen. No other options will be available. It will be flashing continuosly. If I press the power button then one window comes up with options like Shut down, Restart, Hibernate etc. And the screen won't stop flashing either. I've uploaded a 1 min video. Please go through it as it will give you a clear idea of the error which I'm facing now Video Link Here

  Read the article

• How to squeeze the maximum performance out of Unity and GNOME 3?

  - by melvincv

  I see that I do not get good performance with the new Unity desktop, but I should say that Unity has improved a lot since the last edition Ubuntu 11.10. How to squeeze the maximum performance out of 1. Unity 2. GNOME 3 My system specs: -Processors- Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz -Memory- Total Memory : 2049996 kB -PCI Devices- Host bridge : Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) PCI bridge : Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) (prog-if 00 [Normal decode]) VGA compatible controller : Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) (prog-if 00 [VGA controller]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) PCI bridge : Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) ISA bridge : Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) IDE interface : Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) IDE interface : Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) SMBus : Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Ethernet controller : Intel Corporation PRO/100 VE Network Connection (rev 01)

  Read the article

• Restart and/or graphics problem in Ubuntu 12.04

  - by kara

  I having been using 12.04 for a couple of months now, with v. little problems. The other day I restarted my computer, and though I think it rebooted, the screen would be black. I could not even get a visual from a live cd. Finally, I was able to get it to load, but the resolution has been completely off. The computer thinks I have a laptop screen, when I actually have a ViewSonic VP2330wb, and it detects only two resolutions. And still, I have a problem with rebooting. If the screen locks after I leave it for a while, I can't get a visual back, and then when I force a shutdown, it takes 3 times for me to get a grub screen. Then I have to boot in recovery mode, and then finally in normal mode, but the screen is still always off. This is my video card: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fe000000-fe3fffff memory:d0000000-dfffffff ioport:f000(size=64) I am a new ubuntu user, and am at my wits end. Any help would be greatly appreciated.

  Read the article

• wireless card not detected

  - by user281219

  i have a old HP Compaq NX6125 with a new lunbuntu 14.04 32 bits install , but the wireless card is not working I have already done this steps and the wireless leds on the laptop are on but can't see any where the wireless interface , cloud`t do the last two steps . sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer b43-fwcutter Then Reboot And you need to activate the card from settings/network/wireless make it ON After this search for wireless icon at the task bar and look for your wifi. lshw -class network: *-network:0 description: Ethernet interface product: NetXtreme BCM5788 Gigabit Ethernet vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:02:01.0 logical name: eth0 version: 03 serial: 00:0f:b0:f7:d1:0f size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 duplex=full firmware=5788-v3.26 ip=192.168.1.120 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:23 memory:d0000000-d000ffff *-network:1 description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:22 memory:d0010000-d0011fff *-network description: Wireless interface physical id: 1 logical name: wlan2 serial: 00:14:a5:77:9e:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.13.0-29-generic firmware=666.2 link=no multicast=yes wireless=IEEE 802.11bg

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• ArchBeat Link-o-Rama for October 24, 2013

  - by OTN ArchBeat

  Video: How To Embed Custom Content Into Fusion Applications Watch this video tutorial from the Fusion Applications Developer Relations YouTube Channel to learn how to embed reports, charts, twitter streams, web pages, news feeds, and other custom content into Fusion Applications. Oracle GoldenGate 12c - New Release, New Features | Michael Rainey Rittman Mead's Michael Rainey takes you on guided tour through the GoldenGate 12c features that "are relevant to data warehouse and data migration work we typically see in the business intelligence world." Reproducing WebLogic Stuck Threads with ADF CreateInsert Operation and ORDER BY Clause | Andrejus Baranovskis Another post from Oracle ACE Director Andrejus Baranovsikis on dealing with WebLogic Stuck Threads. This one includes a test case application you can download. Oracle WebLogic 12.1.2 Installation in VirtualBox with 0 MHz | Dr. Frank Munz Oracle ACE Director Frank Munz shares the results of some detective work to discover the cause of a strange problem in an Oracle WebLogic installation. The Impact of SaaS - The Times They Are A-Changin' | Floyd Teter Oracle ACE Director Floyd Teter shares some truly interesting insight gained in conversations with three Fortune 500 CIOs. Thought for the Day "All the mistakes I ever made were when I wanted to say 'No' and said 'Yes'." — Moss Hart, playwright, screenwriter (October 24, 1904 – December 20, 1961) Source: brainyquote.com

  Read the article

• Screencast not producing files

  - by JohnS

  I'm using Gnome 3 on 12.04 and trying to create a screencast. I start the screencast using the Ctrl-Alt-Shift-R shortcut and the red light appears in the bottom right corner. I go about my business then press the key combination again when done. The problem is that the screencast file gets generated maybe 1 out of 10 times. Is there a log file I can look at to determine the issue? How about a settings file? UPDATE: I did some additional testing. What's happening is that the screencast does work but it appends the new video to the existing file. Even if the file is renamed or moved to trash. Emptying trash does not create a new file either. Not sure where the video gets recorded to then. The only reliable way I've found to have a new file created is to log out of the session and log back in. Is this expected behaviour? Is there a way to force screencast to create a new file every time Ctrl-Alt-Shift-R is pressed?

  Read the article

• How to help FGLRX detect a device

  - by user113416

  I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

  Read the article

• Ubuntu 12.04 slow boot on ASUS, attached with dmesg and bootchart

  - by stanleyhunk

  I heard that Ubuntu can boot up around 30sec, but I take more than 60sec every time my Ubuntu boot. I also read some forum said need to post the dmesg and bootchart to identify which process slowing down the booting time, as I'm not expert in Ubuntu and wish to learn more about it, I humbly ask any pro here to teach me how. My laptop specs: Model : ASUS K45VS RAM : 8MB CPU : Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz x 8 Graphic Card : nVidia GeForce GT 645M HDD : 750GB OS : Single boot Ubuntu 12.04LTS System.uname : Linux 3.8.0-39-generic #58~precise1-Ubuntu SMP Fri May 2 21:33:40 UTC 2014 x86_64 System.release : Ubuntu 12.04.4 LTS System.kernel.options : BOOT_IMAGE=/boot/vmlinuz-3.8.0-39-generic root=UUID=c8a71503-bce8-406c-9a5f-5aa8284f5c7c ro quiet splash My dmesg (which highlighted to the huge time frame gap): [ 30.772656] cgroup: libvirtd (1961) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772659] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 30.772683] cgroup: libvirtd (1961) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772710] cgroup: libvirtd (1961) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 32.140335] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X [ 32.505619] ACPI Error: Field [TMPB] at 1081344 exceeds Buffer [ROM1] size 262144 (bits) (20121018/dsopcode-236) [ 32.505624] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP._ROM] (Node ffff880224e91f00), AE_AML_BUFFER_LIMIT (20121018/psparse-537) [ 802.034422] audit_printk_skb: 69 callbacks suppressed [ 802.034428] type=1400 audit(1400914804.392:35): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" [ 1581.300901] type=1400 audit(1400915584.816:36): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" My Bootchart.png: Looking forward to learn to improve both my booting time and knowledge. Thanks in advance :)

  Read the article

< Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >