Search Results

Search found 11240 results on 450 pages for 'partition boot sector'.

Page 406/450 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• How do i use RVM w/ Hudson CI server on Debian?

  - by JoshReedSchramm

  I'm trying to setup an automated "build" server for my rails projects using Hudson CI. SO far it's able to run specs and do metrics on the code but I have 2 different projects dependent on 2 different versions of ruby. So i'm trying to use RVM to run multiple copies of ruby then switch back and forth in a pre-build step. I found a couple posts like this one that try and explain how to make this work, but I'm not running a startup script for hudson, it starts on boot which is how it worked out of the box when i installed it via the debian instructions. The problem seems to be that even though hudson runs under the "hudson" account and that account has rvm installed (and working) when it tries to run a shell based prebuild step to call rvm switch 1.8.7 it fails with the error "rvm: command not found" Not sure what I'm doing wrong. Hudson is using SH as its shell but i also tried using bash. no luck. Has anyone gotten this working before in this setup?

  Read the article

• How to diagnose failing 6Gbps SATA connection?

  - by whitequark

  I have a Samsung RC530 notebook and OCZ Vertex-3 6Gbps SATA SSD working in AHCI mode. # dmesg | grep DMI SAMSUNG ELECTRONICS CO., LTD. RC530/RC730/RC530/RC730, BIOS 03WD.M008.20110927.PSA 09/27/2011 # lspci -nn 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) # sdparm -a /dev/sda /dev/sda: ATA OCZ-VERTEX3 2.15 At the boot, the following messages are present in dmesg (I am running Debian wheezy @ Linux 3.2.8): # dmesg | grep -iE '(ata|ahci)' [ 5.179783] ahci 0000:00:1f.2: version 3.0 [ 5.179802] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.179864] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 5.195424] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 5.195429] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.195436] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.204035] scsi0 : ahci [ 5.204301] scsi1 : ahci [ 5.204447] scsi2 : ahci [ 5.204592] scsi3 : ahci [ 5.204682] scsi4 : ahci [ 5.204799] scsi5 : ahci [ 5.204917] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 42 [ 5.204920] ata2: DUMMY [ 5.204923] ata3: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06200 irq 42 [ 5.204924] ata4: DUMMY [ 5.204926] ata5: DUMMY [ 5.204927] ata6: DUMMY [ 5.523039] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.525911] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100 [ 5.531006] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.533703] ata3.00: configured for UDMA/100 [ 5.542790] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133 [ 5.542800] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.552751] ata1.00: configured for UDMA/133 [ 5.553050] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5 [ 5.559621] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SC00 PQ: 0 ANSI: 5 [ 5.564059] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 5.564127] sd 0:0:0:0: [sda] Write Protect is off [ 5.564131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.564158] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.564582] sda: sda1 [ 5.564810] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.572006] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.572010] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.572189] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 6.717181] ata1.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen [ 6.717238] ata1.00: irq_stat 0x08000000, interface fatal error [ 6.717291] ata1: SError: { UnrecovData HostInt 10B8B BadCRC } [ 6.717342] ata1.00: failed command: READ FPDMA QUEUED [ 6.717395] ata1.00: cmd 60/50:00:20:39:58/00:00:00:00:00/40 tag 0 ncq 40960 in [ 6.717396] res 40/00:00:20:39:58/00:00:00:00:00/40 Emask 0x50 (ATA bus error) [ 6.717503] ata1.00: status: { DRDY } [ 6.717553] ata1: hard resetting link [ 7.033417] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.055234] ata1.00: configured for UDMA/133 [ 7.055262] ata1: EH complete [ 7.147280] ata1.00: exception Emask 0x10 SAct 0xf8 SErr 0x280100 action 0x6 frozen [ 7.147340] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.147393] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.147460] ata1.00: failed command: READ FPDMA QUEUED [ 7.147529] ata1.00: cmd 60/08:18:88:17:41/00:00:02:00:00/40 tag 3 ncq 4096 in [ 7.147531] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.147691] ata1.00: status: { DRDY } [ 7.147754] ata1.00: failed command: READ FPDMA QUEUED [ 7.147821] ata1.00: cmd 60/00:20:f8:42:4c/01:00:02:00:00/40 tag 4 ncq 131072 in [ 7.147822] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.147977] ata1.00: status: { DRDY } [ 7.148036] ata1.00: failed command: READ FPDMA QUEUED [ 7.148100] ata1.00: cmd 60/50:28:f8:43:4c/00:00:02:00:00/40 tag 5 ncq 40960 in [ 7.148101] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148255] ata1.00: status: { DRDY } [ 7.148315] ata1.00: failed command: READ FPDMA QUEUED [ 7.148379] ata1.00: cmd 60/00:30:50:98:64/01:00:02:00:00/40 tag 6 ncq 131072 in [ 7.148380] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148534] ata1.00: status: { DRDY } [ 7.148593] ata1.00: failed command: READ FPDMA QUEUED [ 7.148657] ata1.00: cmd 60/00:38:50:99:64/01:00:02:00:00/40 tag 7 ncq 131072 in [ 7.148658] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148813] ata1.00: status: { DRDY } [ 7.148875] ata1: hard resetting link [ 7.464842] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.486794] ata1.00: configured for UDMA/133 [ 7.486822] ata1: EH complete [ 7.546395] ata1.00: exception Emask 0x10 SAct 0x2f SErr 0x280100 action 0x6 frozen [ 7.546470] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.546531] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.546588] ata1.00: failed command: READ FPDMA QUEUED [ 7.546648] ata1.00: cmd 60/00:00:e0:4b:61/01:00:02:00:00/40 tag 0 ncq 131072 in [ 7.546649] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.546794] ata1.00: status: { DRDY } [ 7.546847] ata1.00: failed command: READ FPDMA QUEUED [ 7.546906] ata1.00: cmd 60/00:08:90:2f:48/01:00:02:00:00/40 tag 1 ncq 131072 in [ 7.546907] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547053] ata1.00: status: { DRDY } [ 7.547106] ata1.00: failed command: READ FPDMA QUEUED [ 7.547165] ata1.00: cmd 60/00:10:90:30:48/01:00:02:00:00/40 tag 2 ncq 131072 in [ 7.547166] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547310] ata1.00: status: { DRDY } [ 7.547363] ata1.00: failed command: READ FPDMA QUEUED [ 7.547422] ata1.00: cmd 60/00:18:50:c7:64/01:00:02:00:00/40 tag 3 ncq 131072 in [ 7.547423] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547568] ata1.00: status: { DRDY } [ 7.547621] ata1.00: failed command: READ FPDMA QUEUED [ 7.547681] ata1.00: cmd 60/00:28:e0:4c:61/01:00:02:00:00/40 tag 5 ncq 131072 in [ 7.547682] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547825] ata1.00: status: { DRDY } [ 7.547882] ata1: hard resetting link [ 7.864408] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.886351] ata1.00: configured for UDMA/133 [ 7.886375] ata1: EH complete [ 7.890012] ata1: limiting SATA link speed to 3.0 Gbps [ 7.890016] ata1.00: exception Emask 0x10 SAct 0x7 SErr 0x280100 action 0x6 frozen [ 7.890093] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.890152] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.890210] ata1.00: failed command: READ FPDMA QUEUED [ 7.890272] ata1.00: cmd 60/00:00:90:33:48/01:00:02:00:00/40 tag 0 ncq 131072 in [ 7.890273] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890418] ata1.00: status: { DRDY } [ 7.890472] ata1.00: failed command: READ FPDMA QUEUED [ 7.890530] ata1.00: cmd 60/00:08:90:34:48/01:00:02:00:00/40 tag 1 ncq 131072 in [ 7.890531] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890672] ata1.00: status: { DRDY } [ 7.890724] ata1.00: failed command: READ FPDMA QUEUED [ 7.890781] ata1.00: cmd 60/78:10:e0:4f:61/00:00:02:00:00/40 tag 2 ncq 61440 in [ 7.890782] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890925] ata1.00: status: { DRDY } [ 7.890981] ata1: hard resetting link [ 8.208021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 8.230100] ata1.00: configured for UDMA/133 [ 8.230124] ata1: EH complete Looks like the SATA interface tries to use 6Gbps link, then fails miserably and Linux fallbacks to 3Gbps. This is somewhat fine for me, as the system boots successfully each time and works under high load (cd linux-3.2.8; make -j16). I've also ran memtest86+ and it did not find any errors. What concerns me more is that Grub sometimes takes a long time to load the images and/or fails to load itself completely. The error is consistent and is probablistic: that is, each time I boot I have a certain chance to fail. Actually, I have a slight suspiction on the cause of the failure. Look at the cabling: What kind of engineer does it this way? Nah. Even 1Gbps Ethernet hardly tolerates cables bent over a small angle, and there you have 6Gbps SATA. How cound I determine and fix the cause of errors and/or switch the link to 3Gbps mode permanently?

  Read the article

• Error when trying to use hibernate annotations.

  - by Wilhelm

  The error I'm receiving is listed here. That's my HibernateUtil.java package com.rosejapan; import org.hibernate.SessionFactory; import org.hibernate.cfg.AnnotationConfiguration;; public class HibernateUtil { private static final SessionFactory sessionFactory; static { try { // Create the SessionFactory from hibernate.cfg.xml sessionFactory = new AnnotationConfiguration().configure().buildSessionFactory(); } catch(Throwable e) { System.err.println("Initial sessionFactory creation failed. " + e); throw new ExceptionInInitializerError(e); } } public static SessionFactory getSessionFactory() { return sessionFactory; } } Everything looks all right... I've already included log4j-boot.jar in the CLASSPATH, but didn't resolved my problem.

  Read the article

• the commands ls and get of ftp are not working in vmware

  - by mnish

  Hi, Iam using vmware player version 3.1 to boot a minix 3 os image. After booting the minix os I want to get some files from a server using ftp. the ftp connection to the server works but when i use the commands "ls" or "get" nothing happens except it says "200 PORT command successful" and it hanges in there. The only thing i can do after typing ls+enter or get+enter is to exit the ftp by using ctrl+c. If anyone knows a solution to this? please help. Thank you

  Read the article

• Is there a way to import or convert vmware player images to run on xen?

  - by Shamgar

  It's fairly popular for companies offering a quick way to test their product to give you a vmware player image. I don't run VMWare though, I run Xen exclusively. Most of these images (and the one I'm interested right this moment particularly) are linux images. Is there a way to use this image with Xen? Obviously, I could setup player long enough to boot the image, then move the data out of the image to a Xen image, but I'm hoping for something easier and quicker than that...preferably that doesn't require setting up a box to run player than can run this image.

  Read the article

• What online brokers offer APIs?

  - by Wilco

  So I'm getting really sick of E*TRADE and, being a developer, would love to find an online broker that offers an API. It would be great to be able to write my own trading tools, and maybe even modify existing ones. Based on my research so far, I've only found one option. Interactive Brokers offers a multi-language API (Java/C++/ActiveX/DDE) and has some fairly decent commission rates to boot. I want to make sure there aren't any other options out there I should be considering. Any ideas? Update: Based on answers so far, here's a quick list... Interactive Brokers Java C++ ActiveX DDE for Excel Pinnacle Trading C++ Perl VB.NET Excel MB Trading

  Read the article

• How to do manual DI with deep object graphs and many dependencies properly

  - by Fabian

  I believe this questions has been asked in some or the other way but i'm not getting it yet. We do a GWT project and my project leader disallowed to use GIN/Guice as an DI framework (new programmers are not going to understand it, he argued) so I try to do the DI manually. Now I have a problem with deep object graphs. The object hierarchy from the UI looks like this: AppPresenter-DashboardPresenter-GadgetPresenter-GadgetConfigPresenter The GadgetConfigPresenter way down the object hierarchy tree has a few dependencies like CustomerRepository, ProjectRepository, MandatorRepository, etc. So the GadgetPresenter which creates the GadgetConfigPresenter also has these dependencies and so on, up to the entry point of the app which creates the AppPresenter. Is this the way manual DI is supposed to work? doesn't this mean that I create all dependencies at boot time even I don't need them? would a DI framework like GIN/Guice help me here?

  Read the article

• Why I am not able to run rails tests

  - by dorelal

  This is what I did. > git clone git://github.com/rails/rails.git > cd rails > cd railties > rake And I got following error. (in /Users/dorelal/dev/scratch/rails/railties) ./test/isolation/abstract_unit.rb:236:in `initialize': No such file or directory - /Users/dorelal/dev/scratch/rails/railties/tmp/app_template/config/boot.rb (Errno::ENOENT) from ./test/isolation/abstract_unit.rb:236:in `open' from ./test/isolation/abstract_unit.rb:236 from ./test/isolation/abstract_unit.rb:222:in `initialize' from ./test/isolation/abstract_unit.rb:222:in `new' from ./test/isolation/abstract_unit.rb:222 from test/application/configuration_test.rb:1:in `require' from test/application/configuration_test.rb:1 rake aborted! I checked ~/railties/tmp and this directory is empty. I know rails is not broken. So what am I missing?

  Read the article

• Why are my ActiveRecord class instance variables disappearing after the first request in development

  - by Paul C

  I have a class instance variable on one of my AR classes. I set its value at boot with an initializer and, after that, never touch it again except to read from it. In development mode, this value disappears after the first request to the web server. However, when running tests, using the console or running the production server this does not happen. # The AR class class Group < ActiveRecord::Base class << self attr_accessor :path end end # The initializer Group.path = File.join(RAILS_ROOT, "public", "etc") # First request in a view %p= Group.path #=> "/home/rails/app/public/etc" # Second request in a view %p= Group.path #=> nil Is there something about development mode that nukes instance variables from classes with each request? If so, is there a way to disable this for specific variables or classes?

  Read the article

• Filemaker Pro 9 (Mac) : How do I get it to deal with absolute paths?

  - by Bernd Haug

  I have an installation where FM Pro 9 clients open a solution from an FM Server 9. This solution then needs to access files on a network share from the clients. So far, the network share was mounted with AFP, but an infrastructure change required it to be switched to static NFS mounts. Their boot Volumes may have different names, but they all mount an NFS share at the same mount point in the "real" mount tree (starting from the UNIX root dir, /). According to http://www.filemaker.com/help/html/create_db.8.32.html#1030283 it looks like there is no way to just use a full path without having a volume name as if this was Mac OS classic - is there some way to work around this? Upgrading to a newer FileMaker is not a sought solution.

  Read the article

• Using Visual Studio 2005 (32bit) on a Windows 7 64bit machine.

  - by Krakkos

  I need to use Visual Studio 2005 (C++) on my new laptop - a Sony Vaio with Windows 7 64bit.. I don't need to develop for a 64bit environment, my work is all 32bit, so how can I be sure that I can still develop/debug/test for a 32bit target environment using VS2005 on a 64bit machine....? What's the best option: 1) Just install VS2005 on Windows 7 64bit and carry on.. (suspect problems with 64bit runtime libs..?) 2) Dual boot the laptop with Windows XP 32bit. 3) Run some kind of Virtual Machine with Windows XP in it... (I don't have a VM yet, but would look into it) Thanks

  Read the article

• The use of GROUP BY in MySQL

  - by Gustav Bertram

  I'm fishing for a comprehensive and canonical answer for the typical "mysql group by?" question. Here is some sample data: TABLE A +------+------+----------+-----+ | id | foo | bar | baz | +------+------+----------+-----+ | 1 | 1 | hello | 42 | | 2 | 0 | apple | 96 | | 3 | 20 | boot | 11 | | 4 | 31 | unicorn | 99 | | 5 | 19 | pumpkin | 11 | | 6 | 88 | orange | 13 | +------+------+----------+-----+ TABLE B +------+------+ | id | moo | +------+------+ | 1 | 1 | | 2 | 99 | | 3 | 11 | +------+------+ Demonstrate and explain the correct use of the GROUP BY clause in MySQL. Touch upon the following points: The use of MIN, MAX, SUM, AVG The use of HAVING Grouping by date, and ranges of dates Grouping with an ORDER BY Grouping with a JOIN Grouping on multiple columns Bonus points for references to other great answers, the MySQL online manual, and online tutorials on GROUP BY.

  Read the article

• php is not recognized as an intern command (using windows)

  - by Tristan

  Hello, I want to develop using a framework called symfony BUT, i do not have a MAC and i don't want to dual boot with Debian. I tryed virtual hosts via Virtual Box but it's too crappy. So i decided to stay on windows So when the tutorial tells me to do php lib/vendor/symfony/data/bin/check_configuration.php i do in the windows cmd : php lib\vendor\symfony\data\bin\check_configuration.php and it tells me : 'php' is not recognized as an internal or external command I use UwAmp (php 5.2.12 + mysql + apache) which is stored in E:\logiciels\UwAmp\ inside i have buch of file, but i guess that is important : E:\logiciels\UwAmp\apache\php_5.2.11 How to make the cmd PHP in the windows cmd work propely please?

  Read the article

• Log with timestamps that have millisecond accuracy & resolution in Windows C++

  - by Psychic

  I'm aware that for timing accuracy, functions like timeGetTime, timeBeginPeriod, QueryPerformanceCounter etc are great, giving both good resolution & accuracy, but only based on time-since-boot, with no direct link to clock time. However, I don't want to time events as such. I want to be able to produce an exact timestamp (local time) so that I can display it in a log file, eg 31-12-2010 12:38:35.345, for each entry made. (I need the millisecond accuracy) The standard Windows time functions, like GetLocalTime, whilst they give millisecond values, don't have millisecond resolution, depending on the OS running. I'm using XP, so I can't expect much better than about a 15ms resolution. What I need is a way to get the best of both worlds, without creating a large overhead to get the required output. Overly large methods/calculations would mean that the logger would start to eat up too much time during its operation. What would be the best/simplest way to do this?

  Read the article

• Blackberry 507 Erorr

  - by Haoest

  I didn't think it would be so catastrophic when I typed JavaLoader -usb wipe -a into the command line with my blackberry 8800 test device. It reboots with a 507 error that I can't get rid of. I have Blackberry Desktop Manager 4.6, which is normally what I use to upload my test apps, but this time I go to Application Loader, hitting start gives me that dialog box that shows me the list of 1 USB connection "PIN: xxx" with a password field (which I have no idea of,) then it says "connecting to boot ROM" then stops at the message: A connection to the device can not be established... Now is there a hard physical way of resetting my blackberry 8800, please?

  Read the article

• Creating a "mountable" File System, where to start?

  - by Mike Curry

  A friend and I are thinking about creating a simple file system for learning purposes. We're going to write it in C/C++, and try to get it to a mountable state from within linux. We've both been coding or over 16 years (32 combined), so I suppose its just a matter of finding some documentation, and a ton of learning. My question is, where could I find out more information? (Documentation for creating a file system, requirements of mounting a file system in linux, etc) Where do we start? Edit: I should also mention, this would not be a boot-able file system, just a file system used for storage, though I am not too sure if that matters or not.

  Read the article

• Whenever Gem gives error on Ruby 1.9.3 - No Such File To Load

  - by tackleberry

  I've used whenever gem with ruby 1.9.2 without any problems, but I installed ruby 1.9.3p125 on my server and it stopped working. All I get below error on my cron_error.log file: /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:36:in `gem_original_require': no such file to load -- bundler/setup (LoadError) from /usr/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:36:in `require' from /home/APP_NAME/config/boot.rb:6 from script/rails:5:in `require' from script/rails:5 I checked paths for rake, gem and ruby and everything is under "/usr/local/bin/" and my path is like below: /usr/local/jdk/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/lib/courier-imap/sbin:/usr/lib/courier-imap/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/root/bin I am struggling with this for hours, any help appreciated!

  Read the article

• Repeat over files in a File > Open dialog with Applescript

  - by GotNoSugarBaby

  In the below script I use an Application other than Finder to launch an "Open" browser and perform a search in it. I've got the window into the state I want, but whatever I try can't access the list of files to repeat over. If anyone can help by adding the code to repeat over that file list and log out the file path of each file it'd be a huge help. Thanks a lot. tell application "Preview" -- start the app activate -- let it boot up delay 3 -- ensure it still has focus activate end tell tell application "System Events" tell process "Preview" -- spawn "Open" window keystroke "o" using {command down} delay 0.5 -- spawn "Go to" window keystroke "g" using {command down, shift down} delay 0.5 -- expand scope of search to all of this mac keystroke "/" keystroke return delay 0.5 -- spawn search field keystroke "f" using {command down} delay 0.5 -- perform search keystroke ".jpg OR .jpeg" keystroke return end tell end tell

  Read the article

• I'm getting reports that my app is draining the battery, but only on HTC Incredible.

  - by BenTobin

  Has anyone else noticed behavior specific to the HTC Incredible that might result in an app keeping the device awake and busy? I've received reports that my app is responsible for keeping the device awake and draining the battery, but only from HTC Incredible users. My app responds to a number of Intents that might be related. It has a service that starts on boot, and it also responds to changes in network connectivity. I do use a WakeLock, but I'm careful to release it when I'm done processing, and the WakeLock times out after a couple minutes whether I'm done or not. I've heard that the Incredible may have some connectivity problems, or that some of them do. Could it be that the network is going up and down frequently, triggering my app? Any other ideas? I've asked a user to send me their logs with aLogCat. If they're willing, that may help narrow down the cause.

  Read the article

• Forcibly clear memory in java

  - by MBennett

  I am writing an application in java that I care about being secure. After encrypting a byte array, I want to forcibly remove from memory anything potentially dangerous such as the key used. In the following snippet key is a byte[], as is data. SecretKeySpec secretKeySpec = new SecretKeySpec(key, "AES"); Cipher cipher = Cipher.getInstance("AES"); cipher.init(Cipher.ENCRYPT_MODE, secretKeySpec); byte[] encData = cipher.doFinal(data, 0, data.length); Arrays.fill(key, (byte)0); As far as I understand, the last line above overwrites the key with 0s so that it no longer contains any dangerous data, but I can't find a way to overwrite or evict secretKeySpec or cipher similarly. Is there any way to forcibly overwrite the memory held by secretKeySpec and cipher, so that if someone were to be able to view the current memory state (say, via a cold boot attack), they would not get access to this information?

  Read the article

• info about intel Cos embedded i86 os

  - by Tim Williscroft

  I've got some old Intel printer (Etherexpress XL ) print servers and they seem to be running an Intel OS called Cos aka Intel Client Os i86 I've found out that much just looking in the update files from Intel. It was at least partly written in C. How do I make a custom software image Intel Cos's boot loader will understand ? I know a host PC xmodem's the image to the client device, and I was wondering if anyone had already either reverse-engineered this or had original info ? or is my only recousre to reverse engineer the update file format ?

  Read the article

• PCI function number for SATA AHCI controller

  - by Look Alterno

  I'm debugging a second stage boot loader for a PC with SATA AHCI controller. I'm able to enumerate the PCI bus and find the hard disk. So far, so good. Now, lspci in my notebook (Dell Inspiron 1525) show me: -[0000:00]-+-1f.0 Intel Corporation 82801HEM (ICH8M) LPC Interface Controller +-1f.1 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller +-1f.2 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller \-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller My question: Is SATA AHCI Controller always function 2 in any PC? If not, how I found? I don't pretend to be general; booting my notebook will be good enough, without compromise further refinements.

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by badnaam

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• How to handle this "session failed to write file" error in PHP?

  - by alex

  I am using the Kohana 3 framework, and am using the native session driver. For some reason, occasionally the sessions fail to write to their file. Warning: session_start() [function.session-start]: open(/tmp/sess_*****, O_RDWR) failed: Permission denied (13) in /home/site/public_html/system/classes/kohana/session/native.php on line 27 I am pretty sure Kohana has its own in built error handler, but it is not triggered with this error (i.e. it shows up like a normal PHP error, not the Kohana error). Anyone that has ever used Kohana will notice this seems to have bypassed Kohana's error handling (perhaps set with set_error_handler()). Is there anyway to stop this error from appearing without switching from the native session (i.e. file based) driver? Should I just give good practice the boot and append an @ error suppressor to session_start() in the core code of Kohana? Should I relax the error_reporting()? Thanks

  Read the article

• Rewrite Registry File in Windows

  - by Vulcan Eager

  I have been trying to find a way to "defragment" the registry on my Windows machine. Firstly, does this make sense? Any benefits in doing this? (Not much love on superuser.com) Secondly, I am looking for a way to rewrite the registry using C/C++ with Windows API. Is there a way to read the registry and write it to a new file getting rid of unused bytes along the way? (I might have to write the new file and then boot into another OS/disk before I can overwrite the original... but I am willing to take that risk.)

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >