Search Results

Search found 2519 results on 101 pages for 'duplex printing'.

Page 41/101 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• NIC Bonding/balance-rr with Dell PowerConnect 5324

  - by Branden Martin

  I'm trying to get NIC bonding to work with balance-rr so that three NIC ports are combined, so that instead of getting 1 Gbps we get 3 Gbps. We are doing this on two servers connected to the same switch. However, we're only getting the speed of one physical link. We are using 1 Dell PowerConnect 5324, SW version 2.0.1.3, Boot version 1.0.2.02, HW version 00.00.02. Both servers are CentOS 5.9 (Final) running OnApp Hypervisor (CloudBoot) Server 1 is using ports g5-g7 in port-channel 1. Server 2 is using ports g9-g11 in port-channel 2. Switch show interface status Port Type Duplex Speed Neg ctrl State Pressure Mode -------- ------------ ------ ----- -------- ---- ----------- -------- ------- g1 1G-Copper -- -- -- -- Down -- -- g2 1G-Copper Full 1000 Enabled Off Up Disabled Off g3 1G-Copper -- -- -- -- Down -- -- g4 1G-Copper -- -- -- -- Down -- -- g5 1G-Copper Full 1000 Enabled Off Up Disabled Off g6 1G-Copper Full 1000 Enabled Off Up Disabled Off g7 1G-Copper Full 1000 Enabled Off Up Disabled On g8 1G-Copper Full 1000 Enabled Off Up Disabled Off g9 1G-Copper Full 1000 Enabled Off Up Disabled On g10 1G-Copper Full 1000 Enabled Off Up Disabled On g11 1G-Copper Full 1000 Enabled Off Up Disabled Off g12 1G-Copper Full 1000 Enabled Off Up Disabled On g13 1G-Copper -- -- -- -- Down -- -- g14 1G-Copper -- -- -- -- Down -- -- g15 1G-Copper -- -- -- -- Down -- -- g16 1G-Copper -- -- -- -- Down -- -- g17 1G-Copper -- -- -- -- Down -- -- g18 1G-Copper -- -- -- -- Down -- -- g19 1G-Copper -- -- -- -- Down -- -- g20 1G-Copper -- -- -- -- Down -- -- g21 1G-Combo-C -- -- -- -- Down -- -- g22 1G-Combo-C -- -- -- -- Down -- -- g23 1G-Combo-C -- -- -- -- Down -- -- g24 1G-Combo-C Full 100 Enabled Off Up Disabled On Flow Link Ch Type Duplex Speed Neg control State -------- ------- ------ ----- -------- ------- ----------- ch1 1G Full 1000 Enabled Off Up ch2 1G Full 1000 Enabled Off Up ch3 -- -- -- -- -- Not Present ch4 -- -- -- -- -- Not Present ch5 -- -- -- -- -- Not Present ch6 -- -- -- -- -- Not Present ch7 -- -- -- -- -- Not Present ch8 -- -- -- -- -- Not Present Server 1: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:55 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:28:ae USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:28:af USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.52.1 NETMASK=255.255.0.0 GATEWAY=10.200.2.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:55 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:ae Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:af Server 2: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:a7 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:30:30 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:30:31 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.53.1 NETMASK=255.255.0.0 GATEWAY=10.200.3.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:a7 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:30 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:31 Here are the results of iperf. ------------------------------------------------------------ Client connecting to 10.200.52.1, TCP port 5001 TCP window size: 27.7 KByte (default) ------------------------------------------------------------ [ 3] local 10.200.3.254 port 53766 connected with 10.200.52.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 950 MBytes 794 Mbits/sec

  Read the article

• Ricoh Aficio 1515ps - How can I get the scanner to scan? (printing works)

  - by nutty about natty

  For similar screenshots and story, see: How to define my Samsung SCX3200 multifunction printer? and for a possible solution: How can I get an Epson TX560WD scanner working? Thanks! Edit n°1 installed xsane (via Ubuntu Software Center), launched it and get the following: Clicking on "Help" yields: I tried 4) man sane-dll which yields No manual entry for sane-dll I uninstalled "Simple Scan": didn't help. I tried 3) but aborted due to unsettling warning ;) wasn't that brave (or desperate). Maybe it's due to 1) and I'm stuck with it? Is it really not possible that a driver for either Windoze or Mac OS would also support scanning via Ubuntu? Edit n°2 Resorted to Windows XP and the Network TWAIN Driver ScanRouter or the "lite" version (which I found elsewhere) might also work (under Linux??); but it's more than I need. Thought about WINE, but also that seems to rely on SANE... So still no luck with this device's scanning capabilities with Linux (but good enough (via xp) for my purposes)...

  Read the article

• After one has made many grid based puzzles how does one make then into a PDF ready for printing

  - by alan ross

  After one has generated many grid based puzzles like sudoku, kakuro or even plain crosswords and now one has to print them in a book. How does one make a pdf (book file) from them automatically. To explain the question better. One has the puzzle ready in computer format like ..35.6.89 for all nine rows. The dot being the empty cell. How does one convert then to a picture on a PDF page complete with box, automatically without doing them individually and then print a book from the pdf file. As can be seen there are other things also printed on the page all this is done automatically.

  Read the article

• Will the Canon Pixma MX882 Wireless Multifunction Printer allow you to keep printing once one ink cartridge has run out?

  - by braveterry

  My wife's Epson Workforce 600 has died, and I'm thinking of replacing it with a Canon Pixma MX882 printer/scanner/copier/fax. One of the most annoying things about the Epson is that once it has decided that one of the ink cartridges is empty, it will not let you print anything until the empty cartridge is replaced. I have a Canon IP1800 that will let you print until a cartridge actually runs out of ink, and even when a cartridge is depleted, I can continue to print using the other colors. (The driver allows you to print using only the color cartridges or using only the black cartridge.) Questions: Will the Canon Pixma MX882 allow me to print until the ink runs out or will it declare the cartridge empty while ink is still left? Will the Canon Pixma MX882 allow me to keep printing even after one of the cartridges has been used up?

  Read the article

• Can I wake up PC/laptop on remote printing request?

  - by dzieciou

  I have an old Epson printer that does not have network adapter, only a USB socket. I have also a computer with network card. I could combine them to put this printer in my local network, but then I would need to keep the computer always up and running. That's definitely not economic. Is there a way to wake up computer when printing request arrives? Something like Wake-on-LAN? Or I am forced to use additional hardware?

  Read the article

• Iterating over a String to check for a number and printing out the String value if it doesn't have a number

  - by wheelerlc64

  I have set up my function for checking for a number in a String, and printing out that String if it has no numbers, and putting up an error message if it does. Here is my code: public class NumberFunction { public boolean containsNbr(String str) { boolean containsNbr = false; if(str != null && !str.isEmpty()) { for(char c : str.toCharArray()) { if(containsNbr = Character.isDigit(c)) { System.out.println("Can't contain numbers in the word."); break; } else { System.out.println(str); } } } return containsNbr; } } import com.imports.validationexample.function.NumberFunction; public class Main { public static void main(String[] args) { NumberFunction nf = new NumberFunction(); System.out.println(nf.containsNbr("bill4")); } } I am trying to get it to print out the result to the console, but the result keeps printing multiple times and prints the boolean value, which I do not want, something like this: bill4 bill4 bill4 bill4 Can't contain numbers in the word. true Why is this happening? I've tried casting but that hasn't worked out either. Any help would be much appreciated.

  Read the article

• Printing special / extended characters on web page - Firefox or printer issue?

  - by edmicman

  My dad brought this to my attention and I'm looking into it, but thought I'd post here and see if anyone has any ideas... He's running Win7, using Firefox and printing to a wireless connected Brother HL-2170W printer. He's got a web page (http://cornandsoybeandigest.com/inputs/fertilizer/applying-nitrogen-after-planting-0512/index.html) that has extended/special characters in it - the funny "a" in Fernandez. The characters show correctly in Firefox on the page. He printed it, and the extended "a" printed as a diamond with a question mark. He says it shows that way in the print preview, too. I pulled up the same page in Ubuntu, Firefox, and it displayed in my print preview and physically printed everything correctly. I just checked on my wife's Win7 PC in Firefox and the print preview looked correct on her system, too. We have a Brother 2040 here. Soooo, my question is, is this possibly a problem in the browser somehow, or the printer driver? I'm leaning towards the printer driver now, but I can't say I've run into this before. Is it a setting somewhere? I just installed this printer for him the other day, using the CD that came with it; I could try updating the driver from Brother's website I guess. Is there anything else I should look at or check? Thanks!

  Read the article

• Can't set up printing from Mac OS X (10.5.7) to an HP PSC 2410 shared from PC running Ubuntu 9.10

  - by Weston C

  I've got an HP PSC 2410 printer shared from a fresh Ubuntu 9.10 installation. I'm able to send documents to this printer over the network from another Ubuntu machine. But so far, I haven't been able to find a setup where I can send documents to that printer from a MacBook running 10.5.7. On the Mac side, when setting things up, I go into System Prefs Print & Fax, click on the "+" mark, select "IP", pick "IPP", enter the IP address of the Ubuntu box, leave the queue blank, enter the Name and location, and I think it's when I get to the "Print Using" (driver selection) part that I'm running into issues. If I use "Auto Select", it defaults to "Generic PostScript Printer", which I doubt the PSC 2410 is (and sure enough, if I print, the jobs don't go through). If I try "Select a driver to use...", there's not an option for an HP PSC 2400. This seems a little odd: I can plug the printer directly into one of our Macs and it immediately figures out the driver and I can print no problem, but that's apparently the way things work. So, that leaves one option: "Other", which, when selected, brings up a dialog apparently for the purpose of manually locating a driver. I've tried visiting HP's web site. They have drivers for earlier versions of Mac OS X, but state that after 10.4, Mac OS X should just come with the relevant drivers. I've also tried setting things up by interacting with the CUPS server on the Mac through a browser: I go to http://localhost:631/, select "Add New Printer", pick "Internet Printing Protocol (http)" for the Device selection, enter "http://ubuntu.machine.ip.address:631/printers/hp-psc-2400-series" for the Device URI, select "HP" for Make, and then on the next screen, we're back to the problem where the PSC 2400 just doesn't show up. There's an option to "provide a PPD file", which I assume would be the printer driver I can't find. A Google search for "HP PSC 2410 ppd Leopard" doesn't seem to yield much other than a reminder that the printer is supposed to just work out of the box on Leopard. A local search for ".ppd" or "2410" on either Mac also doesn't yield anything that looks like a relevant print driver. I'm totally stuck at this point. Any advice?

  Read the article

• Removing page title and date when printing web page (with CSS?)

  - by Jared

  By default, when you print a web page, the page title and and URL are printed at the top of the page, and likewise the date and time are printed at the bottom. It is possible to remove this additional as you are printing through the PAGE SETUP menu (under FILE in Internet Exp) Does anyone know of a way of doing this via CSS or javascript?

  Read the article

• Jquery -Print Dialog Area :: Is exist plugin for printing jquery dialog content?

  - by Yosef

  Hi, I dont know well jquery ui. Is exist plugin for printing jquery dialog content? or some simple code Thanks

  Read the article

• Is there any way to disable Erubis from printing "** Erubis 2.6.5" when starting the Rails environme

  - by Nathan

  I have several frequent Cron jobs that are run via Rake and the output of those jobs are e-mailed (via a MAILTO). Due to the fact that these tasks load the Rails environment (which includes Erubis) they always prints out "** Erubis 2.6.5" on startup. This means that an e-mail is always generated since Cron receives output. Is there any way to configure Erubis to cease printing this startup message to the console?

  Read the article

• C onefile program printing (on stdout) self complete source code.

  - by Svisstack

  Hello, I hear 3 years ago problem and apparently have infinity solutions. I want to find one of this infinity set. Problem: Write program (have only one file example "selfsource.c") who printing on stdout self source code and exits. All techniques all alowed. Anyone can help me?

  Read the article

• Silverlight Cream for March 24, 2010 -- #819

  - by Dave Campbell

  In this Issue: Nokola, Tim Heuer, Christian Schormann, Brad Abrams, David Kelley, Phil Middlemiss, Michael Klucher, Brandon Watson, Kunal Chowdhury, Jacek Ciereszko, and Unni. Shoutouts: Michael Klucher has a short post up For Love of the Game (Development)…, where he's looking for some input from the developer community. Shawn Hargreaves has a link post up of all the Windows Phone MIX10 presentations Chris Cavanagh has a Soft-Body Physics for Windows Phone 7 post up that goes along with one he did 1-1/2 years ago! Jeff Weber posted An Open Letter To Microsoft Regarding The Silverlight Game Development Community Pete Brown posted his MIX10 Recap ... lots of information, and discussion of what he was up to ... I liked the Trivia app Pete... glad to hear that was yours :) I've changed my mind and added a WP7 tag to SilverlightCream. I'll straighten out all the Mobile plus Silverlight links to point at the WP7 tab hopefully tonight. From SilverlightCream.com: EasyPainter Source Pack 3: Adorners, Mouse Cursors and Frames Nokola has been busy with EasyPainter adding in Custom, Extensible Mouse Cursors and Customizable Adorners with extensible adorner frames, and best of all... all with source code! Simulate Geo Location in Silverlight Windows Phone 7 emulator Among the things we don't have in our WP7 emulators is Geo Location... Tim Heuer comes to the rescue with a simulator for it... too cool, Tim! Blend 4: About Path Layout, Part II Christian Schormann is back with Part 2 of his tutorial sequence on the new Path Layout. Really good info and definitely cool presentations of the control. Silverlight 4 + RIA Services - Ready for Business: Exposing OData Services Brad Abrams continues his series with a post on exposing OData services. This looks like a great tutorial on the topic... will probably resolve some questions I've been having :) No Silverlight and Preloader Experience(ish) - in 10 seconds... David Kelley exposes the code he uses on his site, designed to be friendly to Silverlight and non-Silverlight users alike. Merged Dictionaries of Style Resources and Blend Phil Middlemiss has a nice article up on Merged Dictionaries and using multiple resource dictionaries that the app chooses, but also be compatible with Prism and Blend while not eating your system resources out of house and home. XNA Game Studio and Windows Phone Emulator Compatibility Michael Klucher has a definitive post up about getting your XNA and system up-to-speed for WP7... a must-read if you've been running any of the other XNA drops. Windows Phone 7 301 Redirect Bug Brandon Watson reports a 301 Redirect bug on WP7 ... see the code and how he got it, then follow along as he explains all the debug paths he took and what the resolution (?) really is :) Silverlight 4: How to use the new Printing API? Kunal Chowdhury has a tutorial up on printing with Silverlight 4 RC... from the project layout to printing and then printing a smaller section... all good Printing problem in Silverlight 4.0 RC - loading images in code behind Jacek Ciereszko also is writing about printing, and in his case he had problems with loading an image dynamically and printing it... plus he provides a solution to the 'blank page' problem. ToolboxExampleAttribute - a new extension point in Blend 4 (and a few other extensibility related changes) Unni has an article up about Expression Blend 4's new ToolboxExampleAttribute which allow you to have multiple examples of the same type resulting in different XAML produced. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone    MIX10

  Read the article

• Silverlight Cream for June 19, 2011 -- #1109

  - by Dave Campbell

  In this Issue: Kunal Chowdhury(-2-), Oren Gal, Rudi Grobler, Stephen Price, Erno de Weerd, Joost van Schaik, WindowsPhoneGeek, Andrea Boschin, and Vikram Pendse. Above the Fold: Silverlight: "Multiple Page Printing in Silverlight4 - Part 3 - Printing Driving Directions" Oren Gal WP7: "Prototyping Windows Phone 7 Applications using SketchFlow" Vikram Pendse Shoutouts: Not Silverlight, but darned cool... Michael Crump has just what you need to get going with Kinect: The busy developers guide to the Kinect SDK Beta Rudi Grobler replies to a few questions about how he gets great WP7 screenshots: Screenshot Tools for WP7 From SilverlightCream.com: Windows Phone 7 (Mango) Tutorial - 14 - Detecting Network Information of the Device Squeaking in just under the posting wire with 2 more WP7.1 posts is Kunal Chowdhury ... first up is this one on grabbing the mobile operator and othe rnetwork info in WP7.1 Windows Phone 7 (Mango) Tutorial - 15 - Detecting Device Information Kunal Chowdhury's latest is on using the DeviceStatus class in WP7.1 to detect device information such as is there is a physical keyboard installed, Memory Usage, Total Memory, etc. Multiple Page Printing in Silverlight4 - Part 3 - Printing Driving Directions Oren Gal has the final episode in his Multiple Page Printing Tutorial Trilogy up... and this is *way* cool... Printing the driving directions. AgFx hidden gem - PhoneApplicationFrameEx Rudi Grobler continues his previous post about AgFX with this one talking about the PhoneApplicationFrameEx class inside AgFx.Controls.Phone.dll.. a RootFrame replacement. Binding to ActualHeight or ActualWidth Stephen Price's latest XAML snippet is about Binding to ActualHeight or ActualWidth... you've probably tried to without luck... check out the workaround. Windows Phone 7: Drawing graphics for your application with Inkscape – Part I: Tiles Erno de Weerd decided to try the 'free' route to Drawing graphics for his WP7 app, and has part 1 of a tutorial series on doing that with Inkscape. Mogade powered Live Tile high score service for Windows Phone 7 Joost van Schaik expounds on his "Catch 'em Birds" WP7 game in the Marketplace... specifically the online leaderboard using the services of Mogade. Building a Reusable ICommand implementation for Windows Phone Mango MVVM apps WindowsPhoneGeek's latest post is discussing the ICommand interface available in WP7.1, and he demontstrates how to implement a reusable ICommand Implementation and how to use it. A TCP Server with Reactive Extensions Andrea Boschin is back posting about Rx, and promises this post *will be* Silverlight related eventually :) First up though is a socket server using Rx. Prototyping Windows Phone 7 Applications using SketchFlow Vikram Pendse has a tutorial up for prototyping your WP7* apps in Sketchflow including a 5 minute video Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• HP ProCurve Port Mode Configuration Question

  - by SvrGuy

  We have a ProCurve Switch 2810-48G (J9022A). We need to disable auto negotiation on two ports and manually configure them to be full duplex gige ports. From the web GUI, Configuration Tab, Port Configuration sub tab, I am only presented with the option to configure the port as Auto - 1000. I take this to mean, auto negotiate duplex, manually configure the speed to be gige. How do I manually configure the port such that it is manually configured to use full duplex, 1000 mbs?

  Read the article

• MIPS return address in main

  - by Alexander

  I am confused why in the code below I need to decrement the stack pointer and store the return address again. If I don't do that... then PCSpim keeps on looping.. Why is that? ######################################################################################################################## ### main ######################################################################################################################## .text .globl main main: addi $sp, $sp, -4 # Make space on stack sw $ra, 0($sp) # Save return address # Start test 1 ############################################################ la $a0, asize1 # 1st parameter: address of asize1[0] la $a1, frame1 # 2nd parameter: address of frame1[0] la $a2, window1 # 3rd parameter: address of window1[0] jal vbsme # call function # Printing $v0 add $a0, $v0, $zero # Load $v0 for printing li $v0, 1 # Load the system call numbers syscall # Print newline. la $a0, newline # Load value for printing li $v0, 4 # Load the system call numbers syscall # Printing $v1 add $a0, $v1, $zero # Load $v1 for printing li $v0, 1 # Load the system call numbers syscall # Print newline. la $a0, newline # Load value for printing li $v0, 4 # Load the system call numbers syscall # Print newline. la $a0, newline # Load value for printing li $v0, 4 # Load the system call numbers syscall ############################################################ # End of test 1 lw $ra, 0($sp) # Restore return address addi $sp, $sp, 4 # Restore stack pointer jr $ra # Return ######################################################################################################################## ### vbsme ######################################################################################################################## #.text .globl vbsme vbsme: addi $sp, $sp, -4 # create space on the stack pointer sw $ra, 0($sp) # save return address exit: add $v1, $t5, $zero # (v1) x coordinate of the block in the frame with the minimum SAD add $v0, $t4, $zero # (v0) y coordinate of the block in the frame with the minimum SAD lw $ra, 0($sp) # restore return address addi $sp, $sp, 4 # restore stack pointer jr $ra # return If I delete: addi $sp, $sp, -4 # create space on the stack pointer sw $ra, 0($sp) # save return address and lw $ra, 0($sp) # restore return address addi $sp, $sp, 4 # restore stack pointer on vbsme: PCSpim keeps on running... Why??? I shouldn't have to increment/decrement the stack pointer on vbsme and then do the jr again right? The jal in main is supposed to handle that

  Read the article

• Error while printing crystal report, with that exception message "No printers are installed".

  - by Ahmed

  I got an exception with message "No printers are installed." while printing a report for depolyed release of our website. I use _rptDocument.PrintToPrinter(1, false, 0, 0); to print a report. I got that exception, even I've more than one printer installed on my machine. Also, I don't get that exception while development, everything while development is going fine. I used "Publish Web Site" and "Web Project Deployment" options to publish/deploy website, but I got the same result. Any suggestions?

  Read the article

• Why doesn't sed's automatic printing deliver the expected results?

  - by CodeGnome

  What Works This sed script works as intended: $ echo -e "2\n1\n4\n3" | sed -n 'h; n; G; p' 1 2 3 4 It takes pair of input lines at a time, and swaps the lines. So far, so good. What Doesn't Work What I don't understand is why I can't use sed's automatic printing. Since sed automatically prints the pattern space at the end of each execution cycle (except when it's suppressed), why is this not equivalent? $ echo -e "2\n1\n4\n3" | sed 'h; n; G' 2 1 2 4 3 4 What I think the code says is: The input line is copied to the hold space. The next line is read into the pattern space. The hold space is appended to the pattern space. The pattern space (line1 + newline + line2) is printed automatically because we've reached the end of the execution cycle. Obviously, I'm wrong...but I don't understand why. Can anyone explain why this second example breaks, and why print suppression is needed to yield the correct results?

  Read the article

• Enabling printing feature within the Terminal Server environment that is published to the internet?

  - by Albert Widjaja

  I got the home and remote office users connect to the Terminal Server on my Windows Server 2003 that I published securely through Juniper SSL VPN client applet, they use normal internet connection to access the link which pop up the Terminal Server Remote Desktop application, so my question is, how can they print out the document from within their terminal server session ? if it is going through the internal office LAN mapping the printer through Remote Desktop connection is the solution but not for this one. Any kind of help and suggestion would be greatly appreciated. Thanks

  Read the article

• How to create or save a PDF with printing/editing restrictions without using Adobe?

  - by suit

  I saved a Powerpoint as a pdf in Office 2007 but I don't see any options to add print restrictions or edit restrictions to it. I don't have Adobe either, so I'm wondering if there is any alternative way to add restrictions to a pdf. I know there are tools to remove document restrictions, but can they do they opposite? Is there any freeware or websites available that can add restrictions to my pdf I created? I found a website that looked promising but it didn't end up working (The upload didn't work).

  Read the article

• Assign value to list

  - by Kenneth B

  Hello First and foremost. I'm totally new to "programming" in Excel. I'm trying to make a price calculator, that calculates the price when I use my printer. I have made some lists so it's easy to perform the calculations. Single or duplex: Singlex/Duplex Format: SRA3 / A4 / SRA3 High Gloss The idea is that if I type in an amount of 100 prints, choose SRA3 format on the list, and choose Duplex on the other list. the calculation would look like this: This is how it's calculated: Paper + (print x sides) = Price of the print job Print prices Per page (singlex or duplex): 0,6 Paper format and price: A4 reg. paper: 0,2 SRA3 High Gloss: 1,25 SRA3 reg. paper: 1 Does anyone know about this???

  Read the article

• MPLS basic configuration

  - by Vineet Menon

  I want to test out MPLS VPN in my lab. I have 3 routers. 2 PEs and 1P router, all cisco 2921. Something like this, ----- ---- ----- | PE1 |.1____192.168.1.0____.2| P |.2____192.168.2.0____.1| PE2 | | | | | | | ----- ---- ----- lo0:10.1.1.1 lo0:10.1.1.2 lo0:10.1.1.3 Here's the configuration file for each of them, PE1 router hostname PE1 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! interface Loopback0 ip address 10.1.1.1 255.255.255.255 ! interface GigabitEthernet0/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.1.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.3 remote-as 100 neighbor 10.1.1.3 update-source Loopback0 neighbor 172.16.1.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.3 activate neighbor 10.1.1.3 send-community extended exit-address-family For P router: hostname P ! no ipv6 cef ip source-route ip cef ! interface Loopback0 ip address 10.1.1.2 255.255.255.255 ! interface GigabitEthernet0/1 ip address 192.168.1.2 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/2 ip address 192.168.2.2 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.2 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 network 192.168.2.0 0.0.0.255 area 0 ! For PE2 router: ! hostname PE2 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! ! interface Loopback0 ip address 10.1.1.3 255.255.255.0 ! interface GigabitEthernet0/0 ip address 192.168.2.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.2.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.3 0.0.0.0 area 0 network 192.168.2.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.1 remote-as 100 neighbor 10.1.1.1 update-source Loopback0 neighbor 172.16.2.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.1 activate neighbor 10.1.1.1 send-community extended exit-address-family ! I am following this article form cisco. But things are not working properly. Any help would be appreciated.

  Read the article

• What emulation mode for an epson printer is best?

  - by deamon

  I'm looking for a color duplex printer for Ubuntu. My favourites are Epson B-310N and Brother HL 4050CDN. The latter should be work with linux, but I'd prefer the first one, because printing costs are cheaper. The epson printer has "Epson ESC/P Raster", "PCL3", and "Epson ESC/P2" emulation. Can I use the printer with one of those emulations under linux? Were there any restrictions (like unusable duplex)?

  Read the article

• 1000baseT/Full Supported and Advertised but not working!

  - by user11973

  Hello, i'm using a AT3IONT-I motherboard with integrated card. If I ethtool it to 1000 full duplex it wont work! Here is sudo ethtool eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) Link detected: yes here is sudo lshw -C network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: 03 serial: bc:ae:c5:8b:7d:33 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.021.00-NAPI duplex=full ip=192.168.0.2 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:42 ioport:e800(size=256) memory:f8fff000-f8ffffff memory:f8ff8000-f8ffbfff memory:fbff0000-fbffffff And lspci -nn: 00:00.0 Host bridge [0600]: nVidia Corporation MCP79 Host Bridge [10de:0a82] (rev b1) 00:00.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a88] (rev b1) 00:03.0 ISA bridge [0601]: nVidia Corporation MCP79 LPC Bridge [10de:0aad] (rev b3) 00:03.1 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0aa4] (rev b1) 00:03.2 SMBus [0c05]: nVidia Corporation MCP79 SMBus [10de:0aa2] (rev b1) 00:03.3 RAM memory [0500]: nVidia Corporation MCP79 Memory Controller [10de:0a89] (rev b1) 00:03.5 Co-processor [0b40]: nVidia Corporation MCP79 Co-processor [10de:0aa3] (rev b1) 00:04.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) 00:04.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) 00:06.0 USB Controller [0c03]: nVidia Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) 00:06.1 USB Controller [0c03]: nVidia Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) 00:08.0 Audio device [0403]: nVidia Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1) 00:09.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) 00:0b.0 RAID bus controller [0104]: nVidia Corporation MCP79 RAID Controller [10de:0abc] (rev b1) 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac4] (rev b1) 00:10.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) 00:15.0 PCI bridge [0604]: nVidia Corporation MCP79 PCI Express Bridge [10de:0ac6] (rev b1) 03:00.0 VGA compatible controller [0300]: nVidia Corporation ION VGA [10de:087d] (rev b1) 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) If i use Code: sudo ethtool -s eth0 speed 1000 duplex full autoneg off then in ethtool speed is Unknown and it doesn't work; if I set it via pre-up it wont work either... Please help!! Thanks!

  Read the article

• Xerox 7400 Printer

  - by user37808

  How do I setup 2 sides printing for xerox 7400

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >