Search Results

Search found 15682 results on 628 pages for 'iphone'.

Page 41/628 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Ad-hoc connection between iPhone and Macbook Pro

    - by Phil Nash
    I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

    Read the article

  • itunes can't see iphone after reinstalled leopard

    - by Joseph SG
    My Mac harddisk died so I replaced it and installed OS to Leopard 10.5.8. Problem now, iTunes doesn't see my iPhone 3GS at all. (iPhoto works just fine) but iTunes is blind. I have too much info on my iPhone, I don't wish to restore/reset it and wish to get everything from my iPhone sync'd into iTunes afresh. How can I do that? Thanks. Joseph

    Read the article

  • Windows 7 Not Recognizing Camera Nor iPhone as Camera

    - by taudep
    I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

    Read the article

  • Iphone colors calendar

    - by juanpablo
    Hi, I use microsoft Exchange to sync google calendar with my iphone, but I don't like the color of this calendar in iphone, how I can change the calendars colors in the iphone ? Many thanks.

    Read the article

  • iPhone VPN with OpenSwan fails to reconnect

    - by gilm
    I have managed to configure VPN with iPhone and OpenSWAN on Linux 2.6. Though, when disconnecting the iphone and reconnecting, it times out. I have found that: 1) no packets are being sent when you disconnect iPhone from VPN. 2) when reconnecting, pluto picks up on the older socket and tries to use that state machine. which then fails and iPhone retransmits until times out. I'm using the latest version in git, including #1204 patch. I see the NAT-T patch debug lines in the logs. But still, no cookie. Help?

    Read the article

  • iPhone Cannot log into WiFi suddenly [closed]

    - by Stanley
    I suddenly get into this strange problem. My iPhone has been using the WiFi setup at my home for more than a year. Suddenly it cannot connect to the internet despite still having the full WiFi signal icon. Have an older iPhone 3 GS and it can still browse the net using the same WiFi. So the wireless router should be working. When I check the non-functioning iPhone, it has the "Router" and the "DNS" entries blank while the functioning iPhone has entries on both of the fields. Also the subnet Mask are different. Please help.

    Read the article

  • encode divx into mpg4 (iphone compatible)

    - by Jonathan
    is there a way to encode (?) a divx file into an mpg4 file or something that will play on the iphone, but while the divx is downloading/streaming. And if possible is it possible to encode on the fly so the divx file gets encoded into an iphone compatible format and then streamed to a iphone with like a 2 minute or so delay, all while the divx file is still downloading.

    Read the article

  • The iPhone “phone” doesn’t have the provisioning profile with which the application was signed.

    - by eda
    i have tried everything to fix this provision problem and nothing is working. ive reformated my mac, reinstalled the iphone, ive also dragged the provisions (developer and distribution) onto the organizer, itunes, and xcode. in itunes people say to drag the provisions to the iphone icon but that doesnt work its only able to go under library it shows a blue rectangle for me to drop it there. i just have a newly created dummy app with a 57x57 icon. ive also setup the project with the distribution thing with its distribution provision. when i build i get this: The iPhone “myphone” doesn’t have the provisioning profile with which the application was signed. Click “Install and Run” to install the provisioning profile “distribution” on “myphone” and continue running “helloworld.app”. and it has a button "install and run" ive clicked on that hundreths of times and nothing. in orgranizer i see a tab called console ive cleared it and rebuild the app and there is some output that i dont understand. I'm thinking its my problem whats it mean? Fri Mar 26 11:22:19 unknown misagent[215] <Error>: profile not valid: 0xe8008012 Fri Mar 26 11:22:19 unknown mobile_installationd[206] <Error>: 00808600 install_embedded_profile: Skipping the installation of the embedded profile Fri Mar 26 11:22:20 unknown mobile_installationd[206] <Error>: 00808600 verify_executable: Could not validate signature: e8008015 Fri Mar 26 11:22:20 unknown mobile_installationd[206] <Error>: 00808600 preflight_application_install: Could not verify /var/tmp/install_staging.NEb61T/helloworld.app/helloworld Fri Mar 26 11:22:20 unknown mobile_installationd[206] <Error>: 00808600 install_application: Could not preflight application install Fri Mar 26 11:22:20 unknown mobile_installation_proxy[219] <Error>: handle_install: Installation failed Fri Mar 26 11:22:20 unknown mobile_installationd[206] <Error>: 00808600 handle_install: API failed Fri Mar 26 11:22:20 unknown mobile_installationd[206] <Error>: 00808600 send_message: failed to send mach message of 64 bytes: 10000003 Fri Mar 26 11:22:20 unknown mobile_installationd[206] <Error>: 00808600 send_error: Could not send error response to client Fri Mar 26 11:22:42 unknown misagent[231] <Error>: profile not valid: 0xe8008012 Fri Mar 26 11:22:43 unknown mobile_installationd[206] <Error>: 00809800 install_embedded_profile: Skipping the installation of the embedded profile Fri Mar 26 11:22:43 unknown mobile_installationd[206] <Error>: 00809800 verify_executable: Could not validate signature: e8008015 Fri Mar 26 11:22:43 unknown mobile_installationd[206] <Error>: 00809800 preflight_application_install: Could not verify /var/tmp/install_staging.6M55Ay/helloworld.app/helloworld Fri Mar 26 11:22:43 unknown mobile_installationd[206] <Error>: 00809800 install_application: Could not preflight application install Fri Mar 26 11:22:43 unknown mobile_installation_proxy[235] <Error>: handle_install: Installation failed Fri Mar 26 11:22:43 unknown mobile_installationd[206] <Error>: 00809800 handle_install: API failed Fri Mar 26 11:22:43 unknown mobile_installationd[206] <Error>: 00809800 send_message: failed to send mach message of 64 bytes: 10000003 Fri Mar 26 11:22:43 unknown mobile_installationd[206] <Error>: 00809800 send_error: Could not send error response to client

    Read the article

  • iPhone doesn't save password for Cisco IPsec VPN using racoon daemon

    - by dsx
    On my Debian server I had set up racoon daemon (1:0.8.0-14) for Cisco IPSec VPN using certificates for authentication. My racoon.conf is like following: log info; path certificate "/etc/racoon/certs"; listen { isakmp $SERVER_IP_HERE [500]; isakmp_natt $SERVER_IP_HERE [4500]; } timer { natt_keepalive 10 sec; } remote anonymous { lifetime time 24 hours; proposal_check obey; passive on; exchange_mode aggressive,main; my_identifier asn1dn; peers_identifier asn1dn; verify_identifier on; certificate_type x509 "cert_name.crt" "key_name.key"; ca_type x509 "ca.crt"; mode_cfg on; verify_cert on; ike_frag on; generate_policy on; nat_traversal on; dpd_delay 20; proposal { encryption_algorithm aes; hash_algorithm sha1; authentication_method xauth_rsa_server; dh_group modp1024; } } mode_cfg { conf_source local; auth_source system; auth_throttle 3; save_passwd on; dns4 8.8.8.8; network4 $SOME_LAN_SUBNET; netmask4 255.255.255.0; pool_size 128; } sainfo anonymous { pfs_group 2; lifetime time 24 hour; encryption_algorithm aes; authentication_algorithm hmac_sha1; compression_algorithm deflate; } I'm not using PSK authentication here. Using iPhone configuration utility I had uploaded all required certificates to iPhone and set up VPN on demand. Everything works just fine except one thing: iPhone refuses to save VPN password regardless of save_passwd on; in racoon configuration file. As opposed to iPhone behaviour, Mac OS X 10.8.2 have no problems saving password. I had examined iPhone log file and found following: racoon[151] <Notice>: >>>>> phase change status = phase 1 established configd[50] <Notice>: IPSec Network Configuration started. configd[50] <Notice>: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = $SUBNET_IP_HERE. configd[50] <Notice>: IPSec Network Configuration: INTERNAL-IP4-MASK = 255.255.255.0. configd[50] <Notice>: IPSec Network Configuration: SAVE-PASSWORD = 0. configd[50] <Notice>: IPSec Network Configuration: INTERNAL-IP4-DNS = 8.8.8.8. configd[50] <Notice>: IPSec Network Configuration: BANNER = . configd[50] <Notice>: IPSec Network Configuration: DEF-DOMAIN = . configd[50] <Notice>: IPSec Network Configuration: DEFAULT-ROUTE = local-address $SUBNET_IP_HERE/32. configd[50] <Notice>: IPSec Phase2 starting. configd[50] <Notice>: IPSec Network Configuration established. configd[50] <Notice>: IPSec Phase1 established. Please note IPSec Network Configuration message containing SAVE-PASSWORD = 0.. Is it a bug in racoon daemon on server, or iPhone (iOS version is 6.0.1 (10A523)) or it is me missing something? How to make iPhone remember IPSec VPN password?

    Read the article

  • iphone app too read text files.

    - by bandito40
    Hi, Need to edit some of the local text files on my iphone but so far all the apps I have downloaded do not navigate the OS3 file tree for me to load and edit them. I need to do this on my iphone as I can no longer access via ssh or with the iphone cable. One of the files to edit is a ssh config file which is what is not allowing ssh connections. Any ideas on apps or other methods that I could use.

    Read the article

  • iphone app to read text files.

    - by bandito40
    Hi, Need to edit some of the local text files on my iphone but so far all the apps I have downloaded do not navigate the OS3 file tree for me to load and edit them. I need to do this on my iphone as I can no longer access via ssh or with the iphone cable. One of the files to edit is a ssh config file which is what is not allowing ssh connections. Any ideas on apps or other methods that I could use. Thanks,

    Read the article

  • Ad-hoc connection between iPhone and Macbook Pro

    - by Phil Nash
    I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

    Read the article

  • Windows 7 Not Recognizing Camera Nor iPhone as Camera

    - by taudep
    I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

    Read the article

  • How to kick Jawbone ICON off iPhone to use with Mac

    - by SeniorShizzle
    I've got a Jawbone ICON, which is paired to my PS3, my Macbook Air, and my iPhone 4. Most of the time I'm using it with my Macbook with A2DP. The problem is that when I turn it on, my iPhone automatically connects to it, and hogs the A2DP profile, so then my Mac can't connect to the thing at all. I sort of like this behavior, so my best solution would be if there was some way to "kick" the ICONs connection to my iPhone from my Mac. It's really difficult because I use it alot with my Mac and my iPhone, so I can't delete one of the profiles, and I need to use A2DP on both devices. What are your suggestions on ways to fix this?

    Read the article

  • My iPhone is stuck at screen with USB cable and iTunes logo

    - by alex
    I just tried updating the iPhone's firmware, and things went haywire. iTunes informed the update had failed and linked me to this page. The iPhone is stuck on the image from the top of that page. I held down the sleep and home buttons until it turned off and turned it back on, and then went through the iPhone's 'restore' mode. It then error'd again and I'm stuck back with the logos on the iPhone. Does anyone know how to fix this? Thanks

    Read the article

  • Recommended way to support backward/forward compatibility in iPhone app?

    - by MrAleGuy
    I'm in the early stages of an iPhone app and I have a question. I did some searching but did not find what I was looking for. There are features in iPhone OS4 that I would like to take advantage of, but I would like for my app to also run on 3.X. It looks like I want to develop against the 4.0 SDK and do the following: Create a "weak link" to any new (4.0) frameworks Call respondsToSelector: for any new method in an existing framework or any method in a new framework before making that call Am I close? What's recommended? Pointers to similar questions welcome.

    Read the article

  • iTunes can't see iPhone after reinstalling Leopard

    - by Joseph SG
    My Mac hard disk died, so I replaced it and installed OS X Leopard 10.5.8. Problem now, iTunes doesn't see my iPhone 3GS at all. iPhoto works just fine, but iTunes is blind. I have too much info on my iPhone, I don't wish to restore/reset it and wish to get everything from my iPhone sync'd into iTunes afresh. How can I do that?

    Read the article

  • Same album repeatedly updates when syncing iTunes with iPhone

    - by Unsliced
    I have many many albums and tracks purchased via the iTunes store both through iTunes directly and via the iPhone. They all synchronise properly and are on iTunes eventually (i.e. if purcashed originally on the iPhone). There's one album, though, purchased via the iTunes app in June this year. Virtually every time I sync the iPhone it says "updating files" and this album gets updated. The rest of the sync goes just fine, new tracks added, listened to podcasts are removed, playlists are updated (notwithstanding that smart playlists' orderings are now utterly broken) fine - but this album is always getting updated. In finder I've looked at the permissions and nothing seems unusual. FWIW, I'm on Mac OS X 10.5.8, iPhone 3.1.2, iTunes 9.02. Anyone with any ideas? It's not a fundamental problem, but it does means that each sync takes an extra 30-60 seconds, which is annoying!

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >