Search Results

Search found 21463 results on 859 pages for 'broken link'.

Page 417/859 | < Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >

• Nvidia RAID 1 Problem. Degraded drives...

  - by Vedat Kursun

  I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

  Read the article

• Nvidia RAID 1 Problem. Degraded drives...

  - by Vedat Kursun

  I had a RAID 1 on my system which has a Gigabyte GA 8N SLI motherboard with a Nvidia chipset.(Nvidia Raid IDE ROM BIOS 4.84) When the system was working probably there used to be an icon on the system try which showed my two RAID disks. Bu after my friend accidentally clicked on the "Remove drive safely" icon while trying to disconnect her USB, I noticed that the RAID system wasn't working. After a reboot there was suddenly a failure message during boot screen. When I enter the Nvidia RAID setup utility (F10) I can see that both drives are degraded and that won't change even if I get into them and press R for Rebuild. Other options are only Delete and Exit. When I boot to Windows (XP Pro 32 Bit) I can see both my disks with the same data on each of them but my RAID 1 is broken. It's a relief to see that at least my RAID 1 was active but it's annoying not being able to rebuild it. Is there a way where I can rebuild my RAID 1 without having to delete the array and build it again? Cause I don't want to backup 400 Gigs of data and then recopy it to my drives... (Disks 2 x Seagate ST3500418 AS SATA Drives)

  Read the article

• nothing happen after a command mount -t (worked before)

  - by user3449429

  i'm having a weird problem. i used to lauch manually the mount command to link a folder on my PLEX server with a folder on my NAS since yesterday it was ok, but i had to halt my plex server and when i tried to mount again the folder, nothing happen. it ask me the su password and that's all. here the command i use in my fstab: //192.168.1.2/Series_TV /home/cidou/Series_TV cifs _netdev,credentials=/home/cidou/.smbcredentials 0 0 //192.168.1.2/films /home/cidou/Films cifs _netdev,credentials=/home/cidou/.smbcredentials 0 0 i tried this command too: sudo mount -t smbfs //192.168.1.2/Films /home/cidou/Films -o user=myname,password=mypass,sec=ntlm --verbose i run an ubuntu 12.04 LTS uname -a Linux plex 3.8.0-29-generic #42~precise1-Ubuntu SMP Wed Aug 14 15:31:16 UTC 2013 i686 i686 i386 GNU/Linux Welcome to Ubuntu 12.04.4 LTS (GNU/Linux 3.8.0-29-generic i686) * Documentation: https://help.ubuntu.com/ System information disabled due to load higher than 2.0 Thanks for reading

  Read the article

• Data-driven animations

  - by saadtaame

  Say you are using C/SDL for a 2D game project. It's often the case that people use a structure to represent a frame in an animation. The struct consists of an image and how much time the frame is supposed to be visible. Is this data sufficient to represent somewhat complex animation? Is it a good idea to separate animation management code and animation data? Can somebody provide a link to animations tutorials that store animations in a file and retrieve them when needed. I read this in a book (AI game programming wisdom) but would like to see a real implementation.

  Read the article

• Problem reinstall GRUB2

  - by Caustic

  I tried to upgrade from 12.04 - 12.10. The install seemed to go well but upon reboot, I get the grub recovery console. I tried to reinstall using the boot-repair Boot Repair which usually works a treat. However this time it says it is scanning my HDD and never recovers. When I try to reinstall grub using the old grub-install <dir> <dev> --recheck --debug &> gruboutput.txt I get this Pastebin link I think it should be installing to dev/mapper/isw_gbaaebhfe_Volume0 even when I made -- dev/mapper/isw_gbaaebhfe_Volume3 Any help would be appreciated

  Read the article

• What is the correct frequency of changing content regularly?

  - by SSRB

  What is the correct frequency of changing content regularly? Suppose I have a site "Seven Sea" having 5 links name as Home, About Us, Product, Sitemap, Contact Us. It is good for site to change the site content regularly. But is there is any minimum and maximum frequency for do this job. Suppose I do change my content daily then is that good for SEO point of view. OR suppose I change my content once in a year Is that bad for SEO. What is best or more better choice? A REQUEST: If this type of question already answered then give me that answered link and do not close the question.

  Read the article

• Does Google counts backlinks from homepage to inside pages?

  - by SharkTheDark

  I have a site with good PR and my inside pages are getting increase of PR, but they don't have links pointing to them, only from my homepage. Does that means that Google counts ALL links on my homepage, including links to inside pages? Does it calculate inside pages PR with one coming from my domain, my homepage, too? Also, if inside pages that got high PR from homepage have link back to homepage, will that increase homepage PR additionally, since those links should count too? By Google PR algorithm formula, by calculations on Wikipedia and Stanford PR algorithm explanation ( which is originally developed by ) it counts those links, and also it counts after-increase backlink again, making few times circle ( it stops because of d ( 0.85 ) factor. ), but it counts them. Does anyone know is this correct?

  Read the article

• install codeigniter on apache

  - by pooja

  I already have php and apache installed on my ubuntu 12.04. I want to install codeigniter which is a php framework. I followed the link: How to install CodeIgniter? . But its too complicated and also I do not want to create symlinks and mount and all the stuff mentioned there. Installation instruction are also on the codegniter site i.e. http://ellislab.com/codeigniter/user-guide/installation/index.html , but those are not elaborative and little confusing. I will be very thankful if anyone can please provide a simple way to install codeigniter with apache server.

  Read the article

• Synchronizing the SamAccountName Property using Windows Azure Active Directory Sync Tool

  - by pk.

  Using this official documentation as a guide, I would expect the SamAccountName property to sync from my on-premise AD to Office 365. I think that it used to do exactly that, but now it seems that it doesn't so much sync the attribute as it does create an entirely new, unlinked value and store it in Office 365. This has caused some minor issues for me (broken scripts, annoying permissions management, etc.) and may be part of a more major issue regarding ADFS authentication. On-Premise PS C:\Windows\system32> Get-ADUser jdoe -Properties SamAccountName | fl SamAccountName SamAccountName : jdoe Office 365 Sync'ed Objects PS C:\Windows\system32> Get-Mailbox jdoe | fl SamAccountName SamAccountName : $1A7H20-K1LCOJFFBHGS I understand how to work around this issue in my scripts -- there exists the ImmutableId property which can be mapped back to the on-premise GUID. As far as the issue I'm having with ADFS, I'm less certain how to proceed and if this is causing my issues. At this point I really would just like some verification that I'm not crazy and that this used to be sync'ed at some point in the past and that Office 365 broke it relatively recently. I also think that MS documentation should perhaps be updated to exclude SamAccountName from the list of synchronized properties on the page I linked.

  Read the article

• How to use Google Analytics as an affiliate to track sales data

  - by lalex

  As an affiliate, how can we get more information on sales? It looks like the goals feature in GA is for those who have control over the receipt page. But we are sending users away using an affiliate link. With event tracking, we've been able to count the clicks and see which links are being clicked the most, but not which ones actually convert. We want to find out the following on each sale: Did the converted user come from search or internal traffic? If it was search, which keyword brought the user to our site (and clicked away and converted)? Is it possible?

  Read the article

• What is Rails way to save images?

  - by user

  I develop on iOS, and I'm switching from a PHP backend to Ruby on Rails. The interchange format is JSON. A quick Google search for 'save images in Rails' has nearly every result talking about saving image data as blobs to the database. I might be mistaken, but I'm under the impression that saving image data in a database is a huge waste of time and space (as opposed to saving a link to the file location ('/img/subcat/4656.png'). In PHP, it's pretty standard to receive the data, generate a filename, then save that file to disk, and then update the database with the image's location on disk. Is this the same for Rails, or is there some built-in ActiveRecord image functionality I'm not aware of?

  Read the article

• CRM: How to Use iSurvey With iSupplier in R12

  - by LuciaC

  In Oracle Applications it is possible to configure iSupplier to link to an Oracle iSurvey, and for the Oracle iSurvey to be executed for a Supplier. This integration requires: An Oracle Script An Oracle iSurvey linked to the Oracle Script iSupplier Configuration to reference the iSurvey. Once set up, the iSurvey will be available from the supplier tab from the Purchasing Responsibilities and from the iSupplier Portal.  Responses to the survey can be viewed from the Survey Administrator Responsibility. Take a look at Doc ID 1589371.1 for step-by-step details of how to configure and use iSurvey with iSupplier.

  Read the article

• Recover data from hard drive with partitions (but not most data) overwritten

  - by Macha

  I have a 500GB hard drive I've been keeping around to recover data from that I removed from a failing NAS drive that got sort of... erratic at the end. I finally got rid of the NAS when during a firmware update it removed the partition table. Fast forward to a week ago, when I was building a new PC, and a mixup resulted in me placing the hard drive in question in the new PC and installing Windows XP on the first 100GB. I'm presuming any data on that first 100GB is now gone, but for the rest of it, is there any way I can recover it at home, as professional data recovery is currently too expensive? I have a blank 1TB HDD if I can store any images of that hard drive on. The problem was definitely with the NAS and not the hard drive, as the hard drive had a successful install of Windows when mistakenly place in the new PC, and there were capacitors in the NAS's circuitry clearly broken. The data I want to recover (in order of priority) is: High: Some jpgs of family photos. Medium: Some RAW files. (There are also jpg versions of all of these) Low: Some mp3s, avis and ISOs, I can re-rip most of these if need be, but it'd be handy not to have to. (I don't need a backup lecture, and if you can hold it in from nagging Jeff Atwood for it, you can hold it in from nagging me for it) In short: The partition tables are gone and overwritten. The data is not overwritten, except for an amount equal to the size of a Windows XP SP3 installation.

  Read the article

• How should I setup billing for AdWords when managing a client's campaign in My Client Center? [closed]

  - by Dustin

  I have worked with Google AdWords before and will now be managing an AdWords account for a client. I have a My Client Center account, but I'm wondering what the best practices are for billing. Should I link billing to my own credit card and then have the client pay me (they have to pay me to manage the account anyway), or should I have the client pay Google directly? How is this usually done? If it is the later, what is the best way to have them input their payment info?

  Read the article

• eSTEP TechCast - June 2014 Material available

  - by uwes

  Dear Partners,We would like to extend our sincere thanks to those of you who attended our TechCast on "Solaris 11.2 Beta -  What's New!".The materials (presentation, replay) from the TechCast are now available for all of you via our eSTEP portal.  You will need to provide your email address and the pin below to access the downloads. Link to the portal is shown below.URL: http://launch.oracle.com/PIN: eSTEP_2011The material can be found under tab eSTEP TechCast.  Feel free to explore also the other delivered TechCasts and more useful information under the Download and Links tab. Any feedback is appreciated to help us improve the service and information we deliver.Thanks and best regards,Partner Systems Enablement EMEA

  Read the article

• Should I add rel nofollow to internal links which already have meta noindex?

  - by CamSpy

  Let's say I have a products page with listing producsts and the page has pagination. I would like the 1st page to have all the SE ranking weight so I decided to put meta noindex on the rest of the paginated pages (from page 2 to N). My common sense says that if I don't want pages to not get indexed, I shouldn't also pass link/PR juice to these pages. (Is that smart?) What happens if I set rel="nofollow" for all pagination links from page 2 to page N?

  Read the article

• Website with over 1 million posts with not much textual content

  - by Far Se

  I've made a website which crawls files from all over the Internet and I feel like Google will ban me if I sent it sitemaps which contain all of these pages (1m+), because they contain only the file name/size/no of downloads and the download link(s). I'm considering this thought because I've made another website like this in the past and Google banned me after one week with the reason: "spam", even it was not (maybe somebody falsely reported me?!). Does someone have an idea about how to keep Google form banning my website? I've seen several other sites like mine and they don't get banned or... anything. And also, should I sent the sitemap or wait until Google indexes every page as it finds them? Thanks in advance :)

  Read the article

• Restricted Flow Of Power

  - by user13827

  I'm sure all is fine, but i need some reassurance. Last month my company launched consolidated two of their websites into one new website. www.fdmgroup.com and www.fdmacademy.com into a newly designed www.fdmgroup.com. Because the FDM Academy grew as it's own brand we decided not to just forward the domain to the fdmgroup website, but instead just mirror the new FDM Group website and use a canonical tags to the FDM Group domain (so the link juice will pass to the FDM Group domain pages) The website has be live for nearly a month and i don't believe any power has passed down through the FDM Group website to it's deeper pages even though 301 redirects from the legacy group and academy domains in place. I am also seeing the same problem on the FDM Academy domain, but i expect to see this as every page has a canonical to the same page on the Is there anything which is restricting the flow of power through the site, or am i just being impatient. Thanks in advance Jon

  Read the article

• Google analytics ignoring "required step" in goals

  - by Matt Huggins

  I am A/B testing a landing page to see which converts better. The funnels are set up exactly the same in terms of the goal completion URL and funnel steps, with one exception: the first step (which is a required step) has a different URL to represent each of the two landing pages. Unfortunately, Google is tracking a conversion for both of these goals regardless of which landing page a user is reaching! It looks like the "required step" is broken...perhaps it is a deeper issue if others haven't noticed it, such as it only not working when the goal URL is the same between multiple goals. Here is an example of what I mean. Goal 1: Goal URL: /users/dashboard (head match) Funnel: 1. /homepages/index1 (required step) 2. /users/register 3. /users/edit Goal 2: Goal URL: /users/dashboard (head match) Funnel: 1. /homepages/index2 (required step) 2. /users/register 3. /users/edit As you can see, the only difference is step #1 of the funnel. Since I am A/B testing the landing page of the site, this should be the only difference. However, when I look at the goal page of Google Analytics, I see that the goal is being recorded for both of these regardless of the landing page being reached. The only tinkering I've done is attempting to wrap each funnel step's goal in ^ and $ characters for an exact regular expression match, but this didn't make a difference. Thoughts?

  Read the article

• Verifying that a user comes from a 'partner' site?

  - by matt_tm

  We're building a Drupal module that is going to be given to trusted 'corporate partners'. When a user clicks on a link, he should be redirected to our site as if he's a logged in user. How should I verify that the user is indeed coming from that site? It does not look like 'HTTP_REFERER' is enough because it appears it can be faked. We are providing these partner sites with API Keys. If I receive the API-key as a POST value, sent over https, would that be a sufficient indicator that the user is a genuine partner-site user?

  Read the article

• What simple offline GUI database should I use for this application?

  - by gcc

  I am looking an open source application. Application should have : * database support ( create two or three table ) * GUI ( what I have created should be seen ) Example : Assume that I have created a table ; X_table : | A | B | C | D | After creating table, I am loading data | A | B | C | D | | 1 | 11 | b | f | - | 3 | 12 | a | o | - data | 4 | 13 | r | o | - When I am opening application not for loading data, I want see data in graphical interface. Are there any open source application which have above feature ? Application can be so simple, * no internet connection * support only one database * static table creation ( once created never changed ) Application can be run Ubuntu 12.04 and/or Windows. In other words, I am wanting database viewer and editor. EDIT: I should load pdf file, image etc. or give path of the file to the application. This link can be reference to my question . ( Interface should be like this, just a list )

  Read the article

• Can I Use A Canonical Tag Instead of a Redirect for Updated Content?

  - by Ewan Heming

  I have some old articles on my blog that get quite a bit of traffic, but are very outdated. I want to remove them from Google's index using the noindex tag, but I'm not sure what the best approach will be to send the same traffic to my new article on the subject without using a redirect (as I want to keep them in my blog archives). I was intending to just put a link at the top of the article pointing to the new one, but was wondering if it was appropriate to use a canonical tag instead; the new article is on the same subject but doesn't contain the same content, so isn't really a copy.

  Read the article

• Script or bat that will make shortcuts

  - by user227056

  I want to make bat (windows) file that will move * files from desktop to x folder and then make shortcuts on the desktop (they must be linked to files in x folder). So: the problem is: There is no way to make shortcut using bat. Only using third-party applications... Or/and using scripts. I need the program/script... that will get their adress, link shortcut to every single file (...\x\s.exe, desktop\s.lnk; ...\l.txt, desktop\l.lnk)...

  Read the article

• Cannot Start My System

  - by KrishArora

  I have installed Ubuntu Studio 13.10 installed on my system. Today I have rebooted it and now it is not starting or booting again, the logo is seen and there appears an error message that says :- [23.755113] systemd-udevd[329]: inotify_add_watch(6, /dev/sdb, 10) failed. No such file or directory After this message the system doesn't start. I have done a boot repair through live CD, but that also doesn't helps me. Here is the link of the boot repair process. Please help me how to restore my system without loosing my data

  Read the article

• Cannot save all of the property settings for this Web Part.

  - by ybbest

  I would like to display all the items of custom content type of Animals in a SharePoint content query WebPart. After choosing the appropriate values in the web part editor and click on Save I got this error: Cannot save all of the property settings for this Web Part. There is a problem with one or more of the field values below. But when I examine all the values below , it does not flag any error information. I finally manage to locate the error flag after I expand the presentation section. I then delete the text in the Link textbox , now I can save the settings. However , I think the error message should have been more specific so that users can quickly locate the error. The worst part for this is that I did not even change anything in the presentation section, I merely configure the Source in the Query section. Well, I guess I am still new to SharePoint, I just have to get used to these generic error message ):

  Read the article

< Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >