Search Results

Search found 15383 results on 616 pages for 'home automation'.

Page 434/616 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >

  • "The volume filesystem root has only..."

    - by jcslzr
    I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

    Read the article

  • Ubuntu 11.10 loads from live usb fine, but boots to black screen from harddrive. Why?

    - by Estel
    A few days ago I had a hard drive failure, which was running Windows XP (32-bit) just fine. The second hard drive in my computer held a few unimportant files, so I formatted it in the Ubuntu setup and installed 11.10 without a hitch. I had been using it for about a week, but decided to install Windows 7 (64-bit) in order to utilize Networking with my home server (running Windows Server 2000). My system is 64-bit based, and thus I had no problems installing other than a basic RAM error that required me to remove my RAM down to a single stick. I played with the settings in Windows 7 for around an hour before I shut down. After reinstalling the RAM, Windows 7 would not boot. In this, I then assumed that something about my system was rejecting Win7 and I reinstalled Ubuntu. However, now Ubuntu (11.10) boots into black screen, and I've already attempted activating the grub menu with the shift key, and following steps listed here: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen but nothing seems to work. I've reinstalled twice now, with the same result each time. Now, the very odd part about this whole scenario is that the USB I installed from has no problems booting as a live USB. This puzzles me greatly, because the hard drive boots straight to black screen and the live USB loads normally. At this point, my only theory is that the boot sector of the hard disk was somehow corrupted with Win7, and that Ubuntu was unable to completely write through. I used Darik's Boot n Nuke to wipe the drive, but was met with an error, this also puzzles me because the hard disk has no promblems reading or writing. Any suggestions/comments are appreciated. If you have a theory, I will be more than happy to oblige. Additional information: Intel Core2 Duo e6400 2.13GHz nVidia GeForce 7-series (7900 GS) 4 GB DDR2 333MHz (2x 2GB) Dell XPS 410 BIOS Revision 2.5.3

    Read the article

  • Can I take a HDD in Raid1 and plug it straight into a different machine?

    - by jacko
    I would assume that I can just take my HDD out of my NAS (in raid1 mirror) and plug it into another enclosure and have it work off the bat but I'd like to make sure... Any ideas? Edit: My current setup is a Netgear ReadyNAS in (hardware) raid1. I'm hoping to replace this with a home theatre type PC (possibly running Ubuntu), and would like to migrate my data without having to do a bulk transfer over my network between the 2 machines. Can anyone confirm the case for the Netgear ReadyNAS?

    Read the article

  • Is it worth replacing mouse by standalone trackpad for heavy code-editing? [on hold]

    - by heltonbiker
    I recently got more interested in improving my tools, workspace and worflow. The first sting came with a sore finger due to a crappy keyboard, and then after some research I fell in love with the "mechanical keyboard is what you need" doctrine, bought one (cherry MX Brown if you're curious), and am very happy with the results. Currently I am replacing my previous text editor (Geany) with Sublime Text 3, and am also very happy and feeling much more powerful and professional :) Well, but while I re-read all the ancient debates about VIM vs whatever-else, the following excerpt from a blog post got me thinking again about the mouse vs keyboard, and the "moving around from the very home row" (in VIM) versus gesturing away with the tiny and unstable mouse cursor: Reaching for a mouse may indeed slow you down, but developers are commonly on machines where the trackpad is a micro-hand movement away. Most novice programmers can click on a character on screen faster than an expert Vimmer can type 20jFp; or LkEEE or /word or any other nasty way Vimmers have to use. The point of a mouse is to make arbitrary on screen jumps efficient, and it’s very good at doing that. Don’t you ever think you can beat a mouse. Well, although there is some bitterness in this statement, it makes a lot of sense, and EVEN MORE if you consider your direct input to be a TRACKPAD conveniently placed in front of your spacebar (which oddly is where I like to put my mouse, rotated 90° ccw, due to a serious tendonitis in my right shoulder, already healed, but you knod...). So, the question is: Has anyone replaced mouse by a standalone trackpad, to work in code editing in a desktop machine (that is, with a sandalone keyboard)? Was it worth the change?

    Read the article

  • squid ip based authentication

    - by Ian R.
    I have 10 ip's on a VPS and squid3 installed. I want to lease all of them to 10 co-workers. The authentication should be ip-based. Basically I want to allow only their home ip address (not internal - we're not on a network) to connect to my squid. I would also like to offer them a dedicated ip from my outgoing addresses. I managed to get it working using username/password based authentication but some software do not support that feature so I would like to switch to this limit if possible. Any guidance/sample acl's?

    Read the article

  • Ubuntu 10.10 and Windows 7 (TrueCrypt) Multi-boot Problems

    - by Samuel Taylor
    I have now been searching days for a solution but have found nothing. I have Ubuntu 10.10 and Windows 7 with TrueCrypt as a multi-boot. It was working fine for a few weeks until I needed to reinstall Ubuntu. If I have the boot flag on the partition where Windows 7 is install (This is where the boot flags was when working before.), it boots fine in to Windows 7 but when pressing Esc it can't find grub2. If I have the boot flag on the partition where Ubuntu is install, it boots fine in to Ubuntu (by pressing Esc or typing the password) but unable to access Windows. I have tried reinstalling TrueCrypt Boot loader and repairing the header but it have no affect. My Partitions: sda1 - Windows 7 Recovery (GRUB2) sda2 - Windows 7 (TrueCrypt Boot Loader) sda3 - Ubuntu 10.10 (/) sda4 - Extended sda5 - Swap sda6 - Ubuntu (/home) Does anyone have any ideas? Thanks Sam

    Read the article

  • is there such a thing as a ip femtocell, and what does it do?

    - by The Journeyman geek
    My dad mentioned a co-worker suggested using a device, that might use cdma to route calls through IP to save costs on a certain overseas project we're on- since our home base is quite far from there. I've never heard of such a device, so if it does, i'm wondering, if its specific to particular ISPs, or if you can just pick one off the shelf, plug it into an arbitraty internet connection, and make calls using it and a cellphone of some sort? As you can tell, details are sketchy, so... if such a device dosen't exist, saying so might be a right answer ;)

    Read the article

  • Unable to create installdriver instance

    - by Entity
    When trying to install a program called "AV Grabber", I get the following error message. unable to create installdriver instance Product name is: EZ Grabber Right click on the executable 7.1.79.0 I have tried installing Install Sheild 7, but have no luck trying to remove this error message. Any Ideas? Machine: Windows XP (Home Edition) User Account: Administrator Account Folder version of installshield is visible from: C:\Program Files\Common Files\InstallShield\Driver\7\Intel 32 Have tried the following command, but have not helped. "C:\Program Files\Common Files\InstallShield\Driver\7\Intel 32\IDriver.exe" -Embedding

    Read the article

  • How to connect to Google App Engine server in internal network iMac?

    - by Will Merydith
    I have 3 iMacs and a Windows machine on my home network, all connected via an Airport Extreme router. I'm developing Google App Engine applications locally on one of the iMacs, and can view applications using http://localhost:8080 (or whatever port I choose). How do I connect to those applications from other iMacs and Windows machines in my network? I've located the IP for the iMac hosting Google App Engine: 10.0.1.7. But when I try http://10.0.1.7:8080 from another machine it will not load the page.

    Read the article

  • Easily manage vsftpd virtual users?

    - by Phil
    I have a vsftpd server configured with many virtual users. logins are stored in a Berkeley DB file One configuration file exists for each user to define his permissions (read-only or read-write, home directory, etc.). To do that, I use the user_config_dir parameter (set in vsftpd.conf). I am wondering if it would be possible to manage these virtual users from a simple GUI (such as web interface). I have found some tools but they are limited to generic vsftpd configuration, not virtual users management. Otherwise, PAM-MySQL seems to be a good way to manage users efficiently but only username/password and logs can be stored in database, not permissions. Finally, I've found this thread, but the solution is a bit awkward... Is there any way to easily manage the vsftpd users ?

    Read the article

  • What is the Best Internet Provider in the Salt Lake Valley for hosting your future online business f

    - by Justin
    This is for people familiar with the ISP scene in Salt Lake. Also, UTOPIA is not available in my neighborhood yet. I'm looking for comparisons between Comcast, Qwest, and especially other providers I'm not aware of. While I will have online backup (of course!), I want to host some things from my own home at the start of my business. Once money starts flowing in, I will move to a hosted provider, but in the meantime I would like a provider which provides fast (1+ mb/s at least) upload speeds (fast download a given), a static IP, and especially a reasonable price.

    Read the article

  • Boot process enter an infinite loop after installing Ubuntu 11.04 together with Windos 7 and XP

    - by Andreafc
    I have a new computer ACER Aspire X3960 which came with Widows 7 preinstalled. I made a new partition where I installed Windows XP and then I installed in new logical partitions (a Swap, a / and a /home partition) Ubuntu 11.04. At the end of the process, the computer enters the very first screen where it says "press DEL to enter BIOS setup, press F12 to enter BOOT options". After a few seconds, the screen goes blank, the computer beeps and then it presents the same screen again. It doesn't even ever go to the grub options of which operating system I want to start. It just loops there forever. I tried to fix the (eventually damaged) grub following these instructions (unfortunately in german) http://wiki.ubuntuusers.de/GRUB_2/Reparatur from a LiveUSB, which I'm also using to post this question. Now I found here that someone asked for the results of the Boot Info Script. Here are mine (I hope I did right in trying to upload the file): http://paste.ubuntu.com/736032/ Can anybody help? Thank you very much. Andreafc

    Read the article

  • Update Manager got stuck (but not frozen) while installing downloaded updates. What should I do?

    - by WarriorIng64
    I have just gotten my Ubuntu 12.04 LTS desktop computer reassembled after a trip back home and connected it to my parent's wireless Internet connection. The connection seems quite shaky (disconnects half the time, likely an ongoing issue with the wireless card I have installed), and it struggled to download updates because of the constant interruptions. Eventually, it managed to download the updated packages and started installing them. I got up and left it to do its work. When I came back, I saw it was still having trouble staying connected to the wireless (no surprise there), but then I noticed that it seemed like Update Manager had stopped making progress on the installation. I opened the Details pane to see what it was last doing: My guess was that the installation script for flashplugin-installer couldn't complete the download until I stabilized the Internet connection. I hooked my Ubuntu laptop up to my desktop via Ethernet and shared its wireless connection using this guide, and as I am typing this now from my desktop you can see that the connection issue was successfully worked around. However, even with a stable connection established, Update Manager seems "stuck" at its current position and won't go any further. It's not totally frozen, but I can't do anything beyond open/close the Details pane as the Cancel button is grayed out. I know it can cause big problems if updates are stopped during installation, but I'm at a loss as to how this situation should be handled. I'm sure it should finish normally if I can just find a way to restart Update Manager, but the question is how this should be approached. How can I safely get my updates to finish installing?

    Read the article

  • Used mountmanager now Ubuntu hangs on boot

    - by fpghost
    I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

    Read the article

  • Strange behavior of USB HID device

    - by spyder
    I have a device with ARM that work as USB HID. It working well on Windows XP x32 sp 2 and sp 3 (USB 2.0, many PCs), on Windows 7 x32 Ultimate (USB 2.0, Lenovo and HP laptops) but do not work on Windows 7 x64 Home Premium sp1 — plugged and unplugged frequently in USB 2.0 with baloon with "unknown device" in system tray and works not well in USB 3.0 port (MSI all-in-one PC), not all programs can detect it. What can cause this problem? Update. I connected my device via USB hub and everything works fine with it.

    Read the article

  • My laptop suppose to have 6 GB ram but it's only 2 GB installed

    - by monablo
    My laptop is supposed to have 6 GB ram but it only detects 2 GB of it, so I don't know what to do. I searched the web for answer and what i get that there's 2 possible problem: 1- That 4 GB ram card is broken and not working 2- or the 2 ram card have a different path so the windows chose the path of the smaller ram card which would be the 2 GB ram I don't know what is the path in first place so I really don't know what to do. How would I troubleshoot, and work out why the 4 GB stick is not being detected? My laptop's specifications are as follows: Windows 7 Home premium 64- bit Operating system processor : intel (R) core(TM) i7 CPU Q740 @1.73 GHz 1.73GHz installed memory(RAM) : 2.00 GB (but it suppose to be 6 GB -_- ) My laptop is Dell and it's Model N5010

    Read the article

  • Modify PATH variable for X11 during log-in

    - by user1028435
    I am working on some lab computers (read: no administrative rights) that, if I log in, I need to change the PATH variable as X11 starts. The reason is that I need to change the PATH variable at this time, as opposed to later, is that the Print Screen command seems to "bind" during login (forgive my bad explanation of this). Currently, I have a .bashrc script as a workaround: #!/bin/bash export PATH=/home/username/bin:$PATH I can make it work by starting a new X, but I was wondering if it is possible to change upon login. cat /etc/redhat-release tells me my distribution is: Red Hat Enterprise Linux Client release 5.8 (Tikanga)

    Read the article

  • How to specify or add directory to Python.h search path during setup.py build/install

    - by ca2longoria
    I'm running Linux, and have downloaded a python module I must install without access to any but my particular /home/user directory (I have no root privileges nor the option to pursue them). This of course requires the Python source. This I've downloaded and have laying around in said user directory. While asking the admin to copy the proper files into /usr/include/python2.7 is the easiest way to go about this, I am hoping for a more general and portable solution to this kind of problem. Changing only data in the module source (MANIFEST.in, README.txt, setup.py, etc.), how might I add an arbitrary directory to the search path for Python.h and friends? (Without a solution, "python setup.py build" will continue returning with the "Python.h: No such file or directory" error) Thank you very much. (Additionally, is it acceptable to post this both here and on StackOverflow?)

    Read the article

  • public_html permissions for local development

    - by maGz
    I know this question has popped up a couple times, but I can't seem to find a definitive answer to my issue, so please bear with me. I have Ubuntu Server 12.04 setup in VirtualBox for PHP development and testing (Drupal plus other PHP sites using Yii framework). My question is in 3 parts... 1) If I create a public_html folder under /home/myuser, do I need to give ownership of that folder to the Apache www-data group? If so, are there any specific permissions I should be setting? 755? (Btw, I am following this guide to create the public_html directory and set up multiple virtual hosts per site I create and test) I previously had all of my sites under /var/www, but ran into massive permission denied errors whenever I tried to sFTP to it, either through FileZilla or PhpStorm. This is what I had previously done: sudo chgrp www-data /var/www sudo chmod -R 775 /var/www sudo chmod -R g+s /var/www sudo usermod -G www-data [my_ftp_user] 2) The second part of my question is this: If I create my PHP project and files in Windows through PhpStorm, and then upload via sFTP, will permissions get affected? 3) Once I am satisfied with my developed project, would it be advisable to move and test them under /var/www to see how it would fair in a production-ish environment? I would really appreciate the help and advice here. I'm learning more as I go along, but dealing with Linux files and permissions is a bit of a new ballgame for me! Thank you

    Read the article

  • Shuttle FB51 mobo does not boot with external USB drive attached [closed]

    - by user127236
    I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

    Read the article

  • Recently reloaded computer, now have trailing effect when windows overlap

    - by Tony
    I recently did a clean install of my home machine and I am having a weird graphical error where if I move one window across the top of another it leaves a trail: I have the most recent NVIDIA drivers installed and nothing new is installed on my machine than before the reload (and I never had this issue before). I have two monitors and it happens on both so I'm sure it isn't a hardware issue (the card and my main monitor are also both less than 6 months old) I've also noticed a ripple when scrolling down on web pages which I believe is related. Any ideas what might be causing this and solutions to fix it?

    Read the article

  • Commands not working in Windows 7 32-bit command prompt

    - by Precious Tijesunimi
    I have an HP laptop with a Windows 7 32-bit Home Premium operating system. My command prompt doesn't run lots of commands like help, shutdown, ipconfig, ping, etc. I get a message like: 'help' is not recognized as an internal or external command, operable program or batch file. Only simple commands like cd and dir are working. I noticed that whenever I navigate to c:/windows/system32, the command works. But I need to run some important commands like java on a file that is on the desktop and not in the system32 folder. How can I fix this?

    Read the article

  • How to switch off? [closed]

    - by Xophmeister
    While I've programmed software for many years, I've only recently started doing so professionally and have noticed a bit of a problematic pattern. I hope this is the best place to pose such a question, as I am interested in others' experiences and solutions... Writing software is, by its nature, a cerebral exercise. When coding for my own sake, I would do so until I was satisfied; even if that meant going all night. Now I'm coding in exchange for goods and services, on projects that are inherently uninteresting to me, I want to 'switch off' when it's time to go home. Maybe you consider that to be a 'bad attitude', but I just don't feel that whatever I'm working on is worth caring about after-hours. Besides, my employer doesn't exactly have the infrastructure required to make out-of-office changes; I can't just clone a repo and even remote login is a PITA. Anyway, the problem I'm experiencing is that, while I'm not particularly overworked or stressed, if I'm faced with a problem, my brain will work on a solution. Generally, it won't give up. Hence I can't switch off and, sometimes, the problem or the solution is significant enough that it disrupts my sleep. While, paradoxically, this doesn't seem to affect my coding ability, it can have a profound impact of the rest of my life. I get increasingly low as I get tired. So far, the best solutions I've found are writing little notes on the matter (and, say, e-mailing them back to my work address) and exercise. Neither of these can switch me off entirely and, as the week progresses, exercise especially becomes untenable due to tiredness. TL;DR How can you stop from being a coding zombie?

    Read the article

  • Deploying my first website!

    - by test
    I have built a data driven website - an asp.net website, using the entity framework. In my solution I have 4 projects - the web application PresentationLayer, and 3 class libraries - Data Layer, Business and Common Layer. In one of these libraries, Common Layer I have my Model (MyModel.edmx). I have always tested my application on Cassini - Asp.Net Development Server. I have never touched IIS in my life. I bought a domain and hosting on go daddy. My logic tells me to grab my four folders (1 for each layer) and simply move them to the root folder. But I know I'm wrong since then the home page would be mywebsite.org/presentationlayer/default.aspx and second of all I start getting a bunch of errors where files do not load or they are not found. I also know that I need to manage the web.config but I don't have any experience where to start. I'm not sure if this is a problem but I also have a web service included in my presentation layer.

    Read the article

  • Word 2007 "Out of Memory or Disk Space" Error on launch

    - by Adam
    Word 2007 is installed on a Vista Home Premium machine and whenever it starts up it opens what appears to be a dynamic installer to do something and then throws up the "Out of Memory or Disk Space" error. Word 2007 never completes starting up. Reinstalling Word hasn't helped and if I can avoid reinstalling Windows until Windows 7 is released and get Word working in the mean time, that would be ideal. I've been looking around for a solution, once of which seemed to point to a problem with the user account. I created a second user on the machine and Word still had the same problem. The other solution that seems possible is a corrupted normal.dot/normal.dotm file. However, even in the location it should be, I can't seem to find it. Am I going in the right direction with this? Is there another solution I haven't come across that will fix this? If it is possible that renaming normal.dot/normal.dotm how can I find it?

    Read the article

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >