Search Results

Search found 44309 results on 1773 pages for 'hp command view'.

Page 446/1773 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

• Disk is spinning down each minute, unable to disable it

  - by lzap

  I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

  Read the article

• Installing Glassfish 3.1 on Ubuntu 10.10 Server

  - by andand

  I've used the directions here to successfully install Glassfish 3.0.1 on an virtualized (VirtualBox and VMWare) Ubuntu 10.10 Server instance without any real difficulty not resolved by more closely following the directions. However when I try applying them to Glassfish 3.1, I seem to keep getting stuck at section 6. "Security configuration before first startup". In particular, there are some differences I noted: 1) There are two keys in the default keystore. The 's1as' key is still there, but another named 'glassfish-instance' is also there. When I saw this, I deleted and recreated them both along with a 'myAlias' key which I was going to use where needed. 2) When turning the security on it seems like part of the server thinks it's on, but others don't. For instances: $ /home/glassfish/bin/asadmin set server-config.network-config.protocols.protocol.admin-listener.security-enabled=true server-config.network-config.protocols.protocol.admin-listener.security-enabled=true Command set executed successfully. $ /home/glassfish/bin/asadmin get server-config.network-config.protocols.protocol.admin-listener.security-enabled server-config.network-config.protocols.protocol.admin-listener.security-enabled=true Command get executed successfully. $ /home/glassfish/bin/asadmin --secure list-jvm-options It appears that server [localhost:4848] does not accept secure connections. Retry with --secure=false. javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Command list-jvm-options failed. $ /home/glassfish/bin/asadmin --secure=false list-jvm-options -XX:MaxPermSize=192m -client -Djavax.management.builder.initial=com.sun.enterprise.v3.admin.AppServerMBeanServerBuilder -XX: UnlockDiagnosticVMOptions -Djava.endorsed.dirs=${com.sun.aas.installRoot}/modules/endorsed${path.separator}${com.sun.aas.installRoot}/lib/endorsed -Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy -Djava.security.auth.login.config=${com.sun.aas.instanceRoot}/config/login.conf -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as -Xmx512m -Djavax.net.ssl.keyStore=${com.sun.aas.instanceRoot}/config/keystore.jks -Djavax.net.ssl.trustStore=${com.sun.aas.instanceRoot}/config/cacerts.jks -Djava.ext.dirs=${com.sun.aas.javaRoot}/lib/ext${path.separator}${com.sun.aas.javaRoot}/jre/lib/ext${path.separator}${com.sun.aas.in stanceRoot}/lib/ext -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver -DANTLR_USE_DIRECT_CLASS_LOADING=true -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory -Dorg.glassfish.additionalOSGiBundlesToStart=org.apache.felix.shell,org.apache.felix.gogo.runtime,org.apache.felix.gogo.shell,org.apache.felix.gogo.command -Dosgi.shell.telnet.port=6666 -Dosgi.shell.telnet.maxconn=1 -Dosgi.shell.telnet.ip=127.0.0.1 -Dgosh.args=--nointeractive -Dfelix.fileinstall.dir=${com.sun.aas.installRoot}/modules/autostart/ -Dfelix.fileinstall.poll=5000 -Dfelix.fileinstall.log.level=2 -Dfelix.fileinstall.bundles.new.start=true -Dfelix.fileinstall.bundles.startTransient=true -Dfelix.fileinstall.disableConfigSave=false -XX:NewRatio=2 Command list-jvm-options executed successfully. Also the admin console responds only to http (not https) requests. Thoughts?

  Read the article

• web services access not being reached thru the web browser

  - by Tony

  I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

  Read the article

• git, egit, submodules, and symlinks -- how should shared sub-projects be handled in eclipse?

  - by Autophil

  Question: what's the best way to handle sub-projects in eclipse when using git for SCM? Here's the situation. I have a few git projects with a directory structure layed out more or less like this: simpleproj app www admin demo lib model orm view model user blah ... storeproj app www about mobile fbapp lib model orm view model user message cart product merchant Each directory in "lib" contains a separate project, either created in-house or forked, all of which use git for source control. So I figured I should make them submodules of my projects, right? Well, we've been moving toward eclipse + egit, because some of our windows guys not used to a CLI need something they can use without being scared of screwing things up. Anyway, the problem is, egit doesn't support submodules. So, my solution has been a rather crude one involving symlinks... lets say my directory structure on my dev box is generally layed out like this: ~/projects/ bigproj .git app lib model (- ~/lib/model/src/) orm (- ~/lib/orm/src/) neatproj .git app lib view (- ~/lib/view/src/) oldproj .git app lib orm (- ~/lib/orm/src/) ~/lib/ model .git src README.md orm .git src COPYING view .git src ...the symlinks link to a subdirectory of the directory containing the git repo, so eclipse doesn't get confused, and everything sort of works. On my machine, I can update the libs from anywhere and all projects will be updated (needing to be committed again of course). Each project stores a separate copy of the contents of the symlinked directories within "lib" -- but only when staged from within eclipse. After committing from eclipse and moving back to the CLI, git sees that a bunch of files have been removed and a few symlinks have been created. Of course this is acceptable also, probably more so than keeping a separate history of the libs for each project... but eclipse and CLI git obviously need to be on the same page so tons of files aren't vanishing and reappearing. So this brings me to my question. I'd like to know how to either: get eclipse+egit to see the symlinks as symlinks if git will somehow handle them properly*, or get the CLI git to treat them as non-symlinks. Or, if there's a better way to do this, I'm all ears. Hope this all made sense! :D Note: tried to tag this as git-submodules, but was not allowed :( * should I make them relative or absolute? Either way it's a mess. Also will symlinks will work on windows? i know there's something similar but you need a 3rd party tool to manage them AFAIK, i doubt these would translate well.

  Read the article

• How to unlock and remove a protected partition from Prestigio USB stick?

  - by mr.b

  Ok, so, I have one of those fancy schmancy devices, which is given to me by a frustrated friend of mine. Device is a Prestigio Leather 8GB, which identifies itself to Linux host as: Bus 001 Device 006: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive Kernel messages as USB device is plugged in: kernel: [ 2769.580042] usb 1-9: new high speed USB device using ehci_hcd and address 7 kernel: [ 2769.714782] scsi8 : usb-storage 1-9:1.0 kernel: [ 2770.713937] scsi 8:0:0:0: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.714535] scsi 8:0:0:1: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.715734] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 2770.716108] sd 8:0:0:1: Attached scsi generic sg4 type 0 kernel: [ 2770.722175] sd 8:0:0:0: [sdc] 962560 512-byte logical blocks: (492 MB/470 MiB) kernel: [ 2770.722657] sd 8:0:0:0: [sdc] Write Protect is on kernel: [ 2770.731078] sd 8:0:0:1: [sdd] 14012416 512-byte logical blocks: (7.17 GB/6.68 GiB) kernel: [ 2770.731215] sdc: kernel: [ 2770.738251] sd 8:0:0:1: [sdd] Write Protect is off kernel: [ 2770.880328] kernel: [ 2770.885876] sd 8:0:0:0: [sdc] Attached SCSI removable disk kernel: [ 2770.887442] sdd: unknown partition table kernel: [ 2771.049605] sd 8:0:0:1: [sdd] Attached SCSI removable disk So, symptoms are typical for U3-like devices: two separate devices inside of a single flash device. Windows sees it also as two identical usb devices, and mounts two separate drives to system, whereas first one presents itself as a CDROM device, holding a write-protected content, and second is a regular flash-disk partition, that "can" be written to. However, it seems like it's broken in some weird way, since it won't let me write anything to it, format it, nothing, but that's not the issue right now. Question: How can I unlock entire USB stick so it appears to system as a single, 8GB device which can be partitioned and used normally, without restrictions? Since it appeared to be an U3 device, I have tried standard utilities: both U3 Uninstaller by u3.com (found on SoftPedia), and opensource u3_tool from sourceforge (on both Windows and Linux). First utility failed to even detect USB stick as U3 device (simply stood idle while I re-plugged stick several times), while second tool failed with some obscure error about SCSI command unable to do something (I might be able to provide exact errors when I switch back to windows). u3_tool -i /dev/sg3 (Display device info) fails with u3_partition_info() failed: Device reported command failed: status 1 ...and every other option fails with same error, minus first part which states which command precisely has failed. So, apparently, this isn't a U3 device. Or, if it is, it doesn't behave like one. I read on a few occasions that this device protection is done by special command sent to device which tells it to lock itself, and so there should be an unlock command, that would set drive straight. Does anyone have any idea about what could I do to this device to fix it? P.S. I also mentioned a problem with being unable to use second "drive", but I'll tackle that problem when (and if) I manage to merge those two devices into one...

  Read the article

• Why do my Application Compatibility Toolkit Data Collectors fail to write to my ACT Log Share?

  - by Jay Michaud

  I am trying to get the Microsoft Application Compatibility Toolkit 5.6 (version 5.6.7320.0) to work, but I cannot get the Data Collectors to write to the ACT Log Share. The configuration is as follows. Machine: ACT-Server Domain: mydomain.example.com OS: Windows 7 Enterprise 64-bit Edition Windows Firewall configuration: File and Printer Sharing (SMB-In) is enabled for Public, Domain, and Private networks ACT Log Share: ACT Share permissions*: Group/user names Allow permissions --------------------------------------- Everyone Full Control Administrator Full Control Domain Admins Full Control Administrators Full Control ANONYMOUS LOGON Full Control Folder permissions*: Group/user name Allow permissions Apply to ------------------------------------------------- ANONYMOUS LOGON Read, write & execute This folder, subfolders, and files Domain Admins Full control This folder, subfolders, and files Everyone Read, write & execute This folder, subfolders, and files Administrators Full control This folder, subfolders, and files CREATOR OWNER Full control Subfolders and files SYSTEM Full control This folder, subfolders, and files INTERACTIVE Traverse folder / This folder, subfolders, and files execute file, List folder / read data, Read attributes, Read extended attributes, Create files / write data, Create folders / append data, Write attributes, Write extended attributes, Delete subfolders and files, Delete, Read permissions SERVICE (same as INTERACTIVE) BATCH (same as INTERACTIVE) *I am fully aware that these permissions are excessive, but that is beside the point of this question. Some of the clients running the Data Collector are domain members, but some are not. I am working under the assumption that this is a Windows file sharing permission issue or a network access policy issue, but of course, I could be wrong. It is my understanding that the Data Collector runs in the security context of the SYSTEM account, which for domain members appears on the network as MYDOMAIN\machineaccount. It is also my understanding from reading numerous pieces of documentation that setting the ANONYMOUS LOGON permissions as I have above should allow these computer accounts and non-domain-joined computers to access the share. To test connectivity, I set up the Windows XP Mode virtual machine (VM) on ACT-Server. In the VM, I opened a command prompt running as SYSTEM (using the old "at" command trick). I used this command prompt to run explorer.exe. In this Windows Explorer instance, I typed \ACT-Server\ACT into the address bar, and then I was prompted for logon credentials. The goal, though, was not to be prompted. I also used the "net use /delete" command in the command prompt window to delete connections to the ACT-Server\IPC$ share each time my connection attempt failed. I have made sure that the appropriate exceptions are Since ACT-Server is a domain member, the "Network access: Sharing and security model for local accounts" security policy is set to "Classic - local users authenticate as themselves". In spite of this, I still tried enabling the Guest account and adding permissions for it on the share to no effect. What am I missing here? How do I allow anonymous logons to a shared folder as a step toward getting my ACT Data Collectors to deposit their data correctly? Am I even on the right track, or is the issue elsewhere?

  Read the article

• Firefox can't establish a connection to the server at www.google.com

  - by Tom

  My home page in Firefox [v4.0] and Internet Explorer [v9.0.8112.16421, Update Versions RTM (KB982861)] is currently set to Google but when I depress the quick start icon to start up either browser, I am getting the following immediate results: Unable to connect (In Firefox) Firefox can't establish a connection to the server at www.google.com. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. Internet Explorer cannot display the webpage What you can try: Diagnose Connection Problems More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. There might be a typing error in the address. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds: Click the Favorites button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages): Press Alt, click File, and then click Work Offline. Click the Favorites button, click History, and then click the page you want to view. Thankfully, I am able to use one browser that I have installed on my computer (Mathon v3.0.20.5000) to search online for technical assistance in this matter. I have seen several WinSock error issues mentioned; but, they are pointing to Windows XP and I am using Windows 7 Pro and remain uncertain whether anything identified as a fix for one OS will work in another. Things I've tried: HiJackThis Complete scan with Avira AntiVirus Premium. What am I overlooking? What should I do to address this problem?

  Read the article

• git, egit, submodules, and symlinks -- how should shared sub-projects be handled in eclipse?

  - by Autophil

  Here's the situation. I have a few git projects with a directory structure layed out more or less like this: simpleproj app www admin demo lib model orm view model user blah ... storeproj app www about mobile fbapp lib model orm view model user message cart product merchant Each directory in "lib" contains a separate project, either created in-house or forked, all of which use git for source control. So I figured I should make them submodules of my projects, right? Well, we've been moving toward eclipse + egit, because some of our windows guys not used to a CLI need something they can use without being scared of screwing things up. Anyway, the problem is, egit doesn't support submodules. So, my solution has been a rather crude one involving symlinks... lets say my directory structure on my dev box is generally layed out like this: ~/projects/ bigproj .git app lib model (- ~/lib/model/src/) orm (- ~/lib/orm/src/) neatproj .git app lib view (- ~/lib/view/src/) oldproj .git app lib orm (- ~/lib/orm/src/) ~/lib/ model .git src README.md orm .git src COPYING view .git src ...the symlinks link inside of directory with the git repo, so eclipse doesn't get confused, and everything sort of works. On my machine, I can update the libs from anywhere and all projects will be updated (needing to be committed again of course). Each project stores a separate copy of the contents of the symlinked directories within "lib" -- but only when staged from within eclipse. After committing from eclipse and moving back to the CLI, git sees that a bunch of files have been removed and a few symlinks have been created. Of course this is acceptable also, probably more so than keeping a separate history of the libs for each project... but eclipse and CLI git obviously need to be on the same page so tons of files aren't vanishing and reappearing. So this brings me to my question. I'd like to know how to either: get eclipse+egit to see the symlinks as symlinks if git will somehow handle them properly*, or get the CLI git to treat them as non-symlinks. Or, if there's a better way to do this, I'm all ears. Hope this all made sense! :D Note: tried to tag this as git-submodules, but was not allowed :( * should I make them relative or absolute? Either way it's a mess. Also will symlinks will work on windows? i know there's something similar but you need a 3rd party tool to manage them AFAIK, i doubt these would translate well.

  Read the article

• SMBfs mounting OK, listing OK, Read KO, smbclient OK

  - by Kwaio

  I've tried to make the title the most meaningfull I could but it still looks ugly. The premises. We are using RHEL3-U8 as OS on most servers here, don't ask me why or suggest to upgrade, it's not on today's schedule. That means kernel used is 2.4.21 I have no access to the remote server, but I know it is a netApp NAS rack. $> smbclient --version Version 3.0.9-1.3E.9 Here is the /etc/fstab line : //NASHOSTNAME/share /mnt/mydir smbfs ro,uid=123,gid=123,workgroup=XXXX,credentials=/somefile 0 0 Here is the following mount output line //NASHOSTNAME/share on /mnt/mydir type smbfs (0) The symptoms. I can list the share without problems, even cd in there. The issue appears if I try to read any file : $> cat /mnt/mydir/fileX.txt cat: /mnt/mydir/fileX.txt: Input/output error In the system logs (/var/log/kernel for example) the following errors appear. Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_open: fileX.txt open failed, result=-5 Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_errno: class ERRHRD, code 31 from command 0x2 Jul 30 15:40:02 hostname kernel: smb_open: fileX.txt open failed, result=-5 Jul 30 15:40:02 hostname kernel: smb_readpage_sync: fileX.txt open failed, error=-5 The ERRHRD code 0x001F error is "General hardware failure" although it seems samba sometimes uses it for a different purpose, see http://www.ubiqx.org/cifs/SMB.html [Strange behaviour Alert] Additionnal informations : There is another SMB mountpoint on the system pointing to a (linux) host using samba and this one works. What I have tried. I have tried adding debug=4 to the mounting options and remounting the share and the logs still look the same. I have tried to mount the share with smbclient and I am able to fetch files with the get command. Both targets are in the same subnet, so network problem should be out, even if the LAN goes through a VPN with optimizers, MTU has already been decreased to 1450. I can also mount the share through NFS but then the files are all root.root 700 and I need to read them with another user...

  Read the article

• web services access not being reached thru the web browser [closed]

  - by Tony

  I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

  Read the article

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• Change the table View when segmented Control is tapped. Exactly as in APPSTORE app. How to do it?

  - by nishitgoenkain

  I am having a SampleViewController in which a segmentedControl is added at the top below nav bar(not inside it).Now below the segmentedControl i want a tableView which loads from another class CommonTableViewController. When a segment is tapped the a new tableView from same CommonTableViewController should be loaded. How can it be done? thanks in advance.

  Read the article

• Boot from USB on MediaSmart EX485

  - by Matt Hanson

  I have an HP MediaSmart EX485. I'm attempting to install Vail on it with a USB flash drive and this guide: http://www.mediasmartserver.net/2010/04/26/how-to-install-windows-home-server-vail-on-the-hp-mediasmart-server/. I'm having issues getting the server to boot from the USB flash drive. The MediaSmart itself being headless doesn't help matters. The flash drive has an LED on it for disk activity, and I'm able to see that it's detected when the server is powered on, but it's definitely not booting from it. Any ideas?

  Read the article

• updating from windows 8 to windows 8.1 give me error 0x101 0x2000c and driver irql not less or equal on clean install

  - by user1143745

  i'm trying to update my hp dv6-6156sl running win 8 to win 8.1. When i try to update the os with all kept when it configures devices (around 55%) i get a bsod with driver irql not less or equal error and windows revert back to my previous windows 8 showing at the end 0x101 0x2000c error. So i tried a clean install to see if i could fix it but i still get the same driver irql not less or equal error (on ntoskrnl.exe) I tried to edit bios settings to see if there's something to disable but like almost all hp laptops it is locked so i can only enable virtualization, select boot order and change gpu between fixed or dinamic (none of these worked) i found the dmp file with the error of the update: https://dl.dropboxusercontent.com/u/2219086/setupmem.dmp How can i fix this?

  Read the article

• OpenIndiana installation hangs at 2% - Preparing disk for OpenIndiana installation

  - by Chris S

  I've been trying to install OpenIndiana on an HP DL320 G6 for a while now. I've got a 16GB HP SDHC card in the onboard slot and a SATA CD-Rom with oi-dev-151a-text-x86.iso burnt to a disc. Installation seems to progress fine until I get to the actual installation portion. The SD card is picked up as a USB Disk. All the other configuration options are very 'normal' (there really aren't many options to begin with). Automatic NIC configuration. The installer starts "Installing OpenIndiana", does a few steps, then gets to "Preparing disk for OpenIndiana installation" at 2%; and just sits there. I've let it sit for half an hour now ans still no progress. How can I get past this issue? PS I'm not terribly familiar with OpenSolaris, but am with FreeBSD and *nix CLIs in general.

  Read the article

• AVerMedia A309-B mini-PCI to AVerMedia A317 Mini PCI card

  - by Chris

  I got an HP pavilion hdx 16 1060ED laptop (Windows Vista) with a a DVB-T tuner card Now I would like a hybrid or analog turner card in it. According to the HP data of a more expensive variant, a AVerMedia A317 Mini PCI card installed is installed. My system has a AVerMedia A309-B mini-PCI placed in the system. my questions: 1 - is it possible to replace it with a expensive one? (AVerMedia A317 Mini PCI card) and 2 - what will this cost? 3 - I can build it myself and what can I do with the old card I like to hear from you.

  Read the article

• How to safely remove a USB device from 2008 Core server?

  - by Qwerty

  I have a Hyper-V Core server 2008 that I administer via command line and remote tools. We have now got a new backup system in place and it involves me connecting an External USB drive (G:) to backup system state files. My question is how should I safely remove the drive for its weekly offsite swap? I've tried using the devcon tool however it just says the 'removal failed with no devices removed' with no other explanation. I have noticed that there isnt a readily available x64 version of devcon and that might be the cause of the problem. (I have read of people downloading a amd64 version but I have not located it myself, if someone knows where it is please let me know). The devcon command worked on my old 2003 x86 server with the command: devcon remove *3200AVJ_EXTERNAL* I have also looked at using fsutil volume dismount g: but it doesn't seem to work as G: is still listed as a connected volume. I have checked that the volume is not in use via remote tools and the net file command. Both show no open files in the G:\ volume. This could be a decent substitute as it might be used to flush any remaining IO to the volume can anyone clarify? Thanks in advance.

  Read the article

• DDR3 10600 memory running at 533mhz

  - by Elger

  I bought a second hand hp dl160 g6 a year ago with 48GB configured in it. I discovered checking with cpu-z and doublechecked with speccy the memory runs at only 533Mhz. I checked the configuration with the HP memory configurator and the banks are populated correctly for max performance. There are 12 banks populated with micron and hynix memory of 4gb, all capable of running 1333mhz. What could me wrong here? C:\Users\Administrator>wmic Memorychip get manufacturer, partnumber, speed, seri alnumber, devicelocator, banklabel BankLabel DeviceLocator Manufacturer PartNumber SerialNumber Speed BANK0 PROC 1 DIMM 3A Micron 36JSZF51272PZ1G4F C5DF65D7 1333 BANK1 PROC 1 DIMM 2D Micron 36JSZF51272PY1G4D 951565E0 1333 BANK3 PROC 1 DIMM 6B Micron 36JSZF51272PZ1G4F 3F3160D6 1333 BANK4 PROC 1 DIMM 5E Hyundai HMT151R7BFR4C-H9 E28A3014 1333 BANK6 PROC 1 DIMM 9C Micron 36JSZF51272PZ1G4F 26DF7E1A 1333 BANK7 PROC 1 DIMM 8F Micron 36JSZF51272PZ1G4G 77FC67D7 1333 BANK9 PROC 2 DIMM 3A Hyundai HMT151R7BFR4C-H9 FB763433 1333 BANK10 PROC 2 DIMM 2D Hyundai HMT151R7BFR4C-H9 E18AA014 1333 BANK12 PROC 2 DIMM 6B Hyundai HMT151R7BFR4C-H9 DF8A1014 1333 BANK13 PROC 2 DIMM 5E Hyundai HMT151R7BFR4C-H9 6968511A 1333 BANK15 PROC 2 DIMM 9C Hyundai HMT151R7BFR4C-H9 F28A7014 1333 BANK16 PROC 2 DIMM 8F Micron 36JSZF51272PZ1G4G 76FC67D7 1333

  Read the article

• PXE-E32 TFTP Open Timeout While Attempting to PXE Boot from Windows Deployment Services

  - by bschafer

  I'm running Windows Deployment Services on Windows Server 2008 R2 on top of an ESX 4.0 box. This is the only function of this VM instance, although it had previously functioned as an AD Domain Controller. My DHCP server is running on our primary Domain Controller, which is also Server 2008 R2, but running on metal. Everything was working perfectly until we recently had our backup generator fail during a power outage, causing all of our servers and networking equipment to lose power for a period of time. When we brought all of our equipment back up, everything was working as expected except for WDS. Our network is split up into several different vlans. Now, depending on which vlan the client computer is on, it's behaving differently when attempting to PXE boot into WDS. Our servers are located on the 10.55.x.x vlan, which, due to the nature of it, has no DHCP server active in it. The first computer we plugged in happened to be in the 10.99.x.x vlan, which is supposed to be reserved for network management devices (i.e. switches), but we've been using it occasionally otherwise. That computer gave us PXE-E11 ARP Timeout errors. When we moved to a different computer on the 10.19.x.x vlan (for general purpose use), it finally gets an IP from DHCP, but it presents us with a very stumping PXE-E32 TFTP Open Timeout error. Before the power outage, it didn't matter which vlan a device was on; it would PXE boot and image just fine. I've made no changes to anything server-side. Everything is configured exactly the same way it was on my WDS and DHCP servers as before the power outage. I've tried several different computers, including different models. All of this, combined with the quirky behavior depending on the vlan, makes me think something went wrong in one or more of our switches, probably because of the power outage. Unfortunately, I'm no network guy, and I know very little about how to configure our switches properly. Is this an issue with switches, etc? If so, how can I fix it? Is there some magical option I'm not aware of? Does anybody out there have any hunches? I've pretty much exhausted my ideas. Our main switch is an HP Procurve 5406. We also have 3x HP Procurve 4208 switches. The ESX Server is an HP ProLiant DL380 G6. The WDS VM is currently using the VMXNET3 network adaptor, but we've also tried the E1000 adaptor.

  Read the article

• Xenserver 6.2 cannot send alert using gmail smtp

  - by Crimson

  I'm using Xenserver 6.2 and configured ssmtp.conf an mail_alert.conf in order to receive alerts through email. I followed the instructions on http://support.citrix.com/servlet/KbServlet/download/34969-102-706058/reference.pdf document. I'm using gmail smtp to send the emails. When i try: [root@xen /]# ssmtp [email protected] from the command line and try to send the email, no problem. It is right on the way. But when i set some VM to generate alerts, alerts are generated. I see in XenCenter but emailing is not working. I see this in /var/log/maillog file: May 27 16:17:09 xen sSMTP[30880]: Server didn't like our AUTH LOGIN (530 5.7.0 Must issue a STARTTLS command first. 18sm34990758wju.15 - gsmtp) From command line every thing works fine. This is the log record for the above command line operation: May 27 15:55:58 xen sSMTP[27763]: Creating SSL connection to host May 27 15:56:01 xen sSMTP[27763]: SSL connection using RC4-SHA May 27 15:56:04 xen sSMTP[27763]: Sent mail for [email protected] (221 2.0.0 closing connection ln3sm34863740wjc.8 - gsmtp) uid=0 username=root outbytes=495 Any ideas?

  Read the article

• CVSROOT problem because of username string

  - by jatanp

  Hi, I have always been SVN user but currently I have to use CVS as the source repository. I am quite new to CVS and really got confused many a times (reason being I always tried to access CVS like SVN !) However now I am really stuck in one problem wherein I am not able to do any cvs operations through cygwin. Actually I have checked out the code using WinCVS and while doing that it created the CVSROOT as following, :pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository However whenever I try to use cvs command in cygwin (after setting CVSROOT variable using export) it fails with following error: cvs update: Unknown option (`username') in CVSROOT. cvs update: in directory .: cvs update: ignoring CVS/Root because it does not contain a valid root. cvs update: Unknown option (`username') in CVSROOT. cvs [update aborted]: Bad CVSROOT: `:pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository'. However the command works fine, if invoked through dos command prompt. I got to know that on DOS prompt, cvs command is provided by CVSNT whereas in cygwin it's some different package. Please let me know where I have made a mistake and how it can be corrected ! I need cvs to work inside cygwin for some scripting purpose.

  Read the article

• Warning flagged by the 'rkhunter'

  - by gkt.pro

  when I scanned my Ubuntu 10.04 with rkhunter a root kit hunter toolkit, it gave following warning: Is there something that I have to worry about. [23:06:19] /usr/sbin/adduser [ Warning ] [23:06:19] Warning: The command '/usr/sbin/adduser' has been replaced by a script: /usr/sbin/adduser: a /usr/bin/perl script text executable [23:06:20] /usr/sbin/rsyslogd [ Warning ] [23:06:20] Warning: The file properties have changed: [23:06:22] /usr/bin/dpkg [ Warning ] [23:06:22] Warning: The file properties have changed: [23:06:22] /usr/bin/dpkg-query [ Warning ] [23:06:22] Warning: The file properties have changed: [23:06:24] /usr/bin/ldd [ Warning ] [23:06:24] Warning: The file properties have changed: [23:06:24] Warning: The command '/usr/bin/ldd' has been replaced by a script: /usr/bin/ldd: Bourne-Again shell script text executable [23:06:24] /usr/bin/logger [ Warning ] [23:06:24] Warning: The file properties have changed: [23:06:25] /usr/bin/mail [ Warning ] [23:06:25] Warning: The file '/usr/bin/mail' exists on the system, but it is not present in the rkhunter.dat file. [23:06:27] /usr/bin/sudo [ Warning ] [23:06:27] Warning: The file properties have changed: [23:06:29] /usr/bin/whereis [ Warning ] [23:06:29] Warning: The file properties have changed: [23:06:29] /usr/bin/lwp-request [ Warning ] [23:06:29] Warning: The command '/usr/bin/lwp-request' has been replaced by a script: /usr/bin/lwp-request: a /usr/bin/perl -w script text executable [23:06:29] /usr/bin/bsd-mailx [ Warning ] [23:06:29] Warning: The file '/usr/bin/bsd-mailx' exists on the system, but it is not present in the rkhunter.dat file. [23:06:30] /sbin/fsck [ Warning ] [23:06:30] Warning: The file properties have changed: [23:06:30] /sbin/ifdown [ Warning ] [23:06:30] Warning: The file properties have changed: [23:06:31] /sbin/ifup [ Warning ] [23:06:31] Warning: The file properties have changed: [23:06:34] /bin/dmesg [ Warning ] [23:06:34] Warning: The file properties have changed: [23:06:35] /bin/more [ Warning ] [23:06:35] Warning: The file properties have changed: [23:06:36] /bin/mount [ Warning ] [23:06:36] Warning: The file properties have changed: [23:06:37] /bin/which [ Warning ] [23:06:37] Warning: The command '/bin/which' has been replaced by a script: /bin/which: POSIX shell script text executable [23:08:58] Checking /dev for suspicious file types [ Warning ] [23:08:58] Warning: Suspicious file types found in /dev: [23:08:58] Checking for hidden files and directories [ Warning ] [23:08:58] Warning: Hidden directory found: /etc/.java [23:08:58] Warning: Hidden directory found: /dev/.udev [23:08:58] Warning: Hidden directory found: /dev/.initramfs [23:09:01] Checking version of Exim MTA [ Warning ] [23:09:01] Warning: Application 'exim', version '4.71', is out of date, and possibly a security risk. [23:09:01] Checking version of GnuPG [ Warning ] [23:09:01] Warning: Application 'gpg', version '1.4.10', is out of date, and possibly a security risk. [23:09:01] Checking version of OpenSSL [ Warning ] [23:09:01] Warning: Application 'openssl', version '0.9.8k', is out of date, and possibly a security risk.

  Read the article

• Error In centos6 while compiling java classes,in tomcat6

  - by AJIT RANA

  I am newbie to Linux and Centos6. I bought server just now and want to deploy my web app in it. I am getting error while I am compiling my servlet classes. It showing me bash: javac: command not found when I try to compile my classes. But when I checked my class in '/usr/lib/jvm/java-1.6.0/bin .'I found my javac there. Then I checked javac with the help of command ./javac i got ERROR.. [root:ip_address.com]# ./javac There is insufficient memory for the Java Runtime Environment to continue. pthread_getattr_np Error occurred during initialization of VM java.lang.OutOfMemoryError: unable to create new native thread I followed the step as shown in "" Java outofmemoryerror when creating <100 threads "" which shows me command to get limits.. '[root:ipaddress.com]# ulimit -a core file size (blocks, -c) unlimited data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 278528 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 1024 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited' [root:ipaddress.com]# top bash: top: command not found link :- http://stackoverflow.com/q/12913857/1746764

  Read the article

• IPMI not fucntioning with Network Bonding

  - by muhammed sameer

  Hey, I am having problems with running IPMI on my servers that have network bonding enabled. Platform: CentOS release 5.3 (Final) Kernel: 2.6.18-92.el5 64bit Dell PowerEdge 1950 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet I have bonded the interface eth0 and eth1 as active passive, with eth0 as the active interface, below is conf description from /proc Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth0 Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 30 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cd Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cf My IPMI device is as follows IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries I Have used openIPMI as well as freeipmi both to control the chassis via the IPMI card, but on servers which have bonding enabled, the command times out, below is the full run of the command with debug info. ipmi_lan_send_cmd:opened=[0], open=[4482848] IPMI LAN host 70.87.28.115 port 623 Sending IPMI/RMCP presence ping packet ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed Error: Unable to establish LAN session Failed to open LAN interface Unable to get Chassis Power Status On the other hand I configured IPMI on a box with the same specs as mentioned above without bonding and IPMI works perfectly. Has anyone faced this problem with IPMI + Bonding ? I would be thankful is someone helps circumvent this issue. Muhammed Sameer

  Read the article

• How can I filter /var/adm/wtmpx on Solaris 10?

  - by Yanick Girouard

  Some of our Solaris 10 servers are monitored using SiteScope, which uses Telnet to probe certain ports (SSH is one of them) every few minutes. This is creating an insane amount of lines in /var/adm/wtmpx, and eventually make it so big (2,5G+) that we can no longer run the last command, or that the uptime command is unable to accurately show the true uptime of the server. The error we get when trying to run the last command is this: /var/adm/wtmpx: Value too large for defined data type I have found ways we can clean this accounting log using a cron job (with the command /usr/lib/acct/fwtmp), and this works. This is not the issue. I was wondering if there would be a way to simply prevent connections from the monitoring user (in our case, user monsite) from creating entries in this accounting log at all. Is this possible, and if so, how can I do it? I've looked around and searched Google for a while, but couldn't find an answer to this question. NOTE: We are very well aware that the monitoring solution we employ is perhaps not the best one, but we cannot change it at this time. Therefore, suggesting that we change it is not pertinent to this question. If you want to read more on the Sitescope monitoring solution we employ for those servers, please see its documentation here and look for Port Monitor, and Connecting to remote UNIX servers, which explains how it works.

  Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >