serial ports - Page 45 - Developer IT

System and Router configuration for setting up a home firewall based on Zentyal

- by Ako

I am not much of a system administrator, so please be patient if this looks too simple for you. I have a several computers at home, and all of them connect using an ADSL modem/router (and Wireless AP). I have been attacked several times (mainly from Russia and Ukraine), so I thought I should have some kind of firewall, besides the ESET firewall on my Windows 7. So now I have these (new) configuration: I have a small ADSL modem (Zyxel brand) which has only one Ethernet port. This modem is used to connect to internet and is configured in NAT mode. The interface has is configured with IP address 192.168.1.1. I have an old PC and I have installed zentyal on it. It has two Ethernet ports, eth0 and eth1. Eth0 is connected to the Zyxel modem with IP 192.168.1.2 and is checked as the WAN interface (external). I have another ADSL modem which is also a router with 4 Ethernet ports and Wireless AP. One of the Ethernet ports is connected to eth1 on Zentyal box. The Ethernet port's IP is 192.168.2.1 and Zentyal's eth1 is 192.168.2.2. Now, I want to enable other computers to connect to internet through the router both using Wireless and Ethernet. The problem is that I don't know how to configure the router so it routes connections to the Zentyal box. Does anyone have any clue? Again I am sorry if this looks stupid. Thanks.

Read the article

squid bypass for a domain

- by krisdigitx

i am using squid with adzap, it possible that squid/adzap does not cache for a particluar domain eg. cnn.com this is my squid.conf file # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 #acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 #acl to_localhost dst ::1/128 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 192.168.1.0/24 acl localnet src 192.168.2.0/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port xxx.xxx.xxx.yyy:3128 transparent visible_hostname proxyserver.local # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/spool/squid 1024 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 access_log /var/log/squid/squid.log squid access_log syslog squid redirect_program /usr/local/adzap/scripts/wrapzap fixed using acl allow_domains dstdomain www.cnn.com always_direct allow allow_domains

Read the article

Using Active Directory through a Firewall

- by Adam Brand

I had kind of a weird setup today where I wanted to enable Windows Firewall on a Windows 2003 R2 SP2 computer that would act as an Active Directory Domain Controller. I didn't see one resource on the Internet that listed what would be required to do this, so I thought I'd list them here and see if anyone has anything to add/sees something that isn't necessary. Ports to Open with "subnet" scope: 42 | TCP | WINS (if you use it) 53 | TCP | DNS 53 | UDP | DNS 88 | TCP | Kerberos 88 | UDP | Kerberos 123 | UDP | NTP 135 | TCP | RPC 135 | UDP | RPC 137 | UDP | NetBIOS 138 | UDP | NetBIOS 139 | TCP | NetBIOS 389 | TCP | LDAP 389 | UDP | LDAP 445 | TCP | SMB 445 | UDP | SMB 636 | TCP | LDAPS 3268 | TCP | GC LDAP 3269 | TCP | GC LDAP Ports to Open with "Any" Scope (for DHCP) 67 | UDP | DHCP 2535 | UDP | DHCP ALSO You need to restrict RPC to use fixed ports instead of everything 1024. For that, you need to add two registry keys: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters Registry value: TCP/IP Port Value type: REG_DWORD Value data: <-- pick a port like 1600 and put it here HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters Registry value: DCTcpipPort Value type: REG_DWORD Value data: <-- pick another port like 1650 and put it here ...don't forget to add entries in the firewall to allow those in (TCP, Subnet scope). After doing all that, I was able to add a client computer to the AD domain (behind Windows Firewall) and log in successfully.

Read the article

Redirection of outbound UDP port.

- by pboin

For my residential service, I changed ISPs to Zoom/Armstrong. Just after that, my NTP daemons stopped working. I dug deep and diagnosed the problem: Unprivileged ports are getting out. When i run 'ntpdate' for example, I go out on a high, unprivleged port, and get a response on UDP 123. That's fine. The 'ntpd' daemon though, expects to go out on 123 and get its reply there as well. This must be a common problem, because it's directly addressed in the NTP troubleshooting guide. Just to see what would happen, I wrote a detailed email to the general support address at Armstrong. They replied almost immediately with a complete technical answer! They have everything <1024 blocked, except for a few ports to support outbound VPN. So, the question: Can I use IPtables to essentially re-write my outbound UDP 123 up to 2123 or something like that? If I do, does there need to be a corresponding 2123-123 rule to translate the reply? This seems like NAT, but with ports, not addresses. I tried, but can't seem to get iptables to do what I want. I'm not sure if it's my lack of skill, or if I'm trying the wrong solution. True, I could run ntpdate from cron, but that loses all of the adjustment smarts of NTP.

Read the article

Network structure --> Server 2k8r2 <--> Livebox <--> Router <--> Other PCs

- by Yusuf

I have a Livebox connection to the Internet and I have set up my network as follows: - Livebox <--> Win2k8R2 Server - Livebox <--> Netgear N150 Router - Router <--> Other PCs Therefore, in my LAN, - the Livebox has IP address 192.168.1.1, - the Router 192.168.1.12 (when accessed from the Livebox or the server), - the Router 10.0.0.1 (when accessed from the PCs connected to the Router), - the server 192.168.1.2, - the PCs 10.0.0.x I was using a previous configuration, which was as follows: - Livebox <--> Netgear N150 Router - Router <--> Win2k8R2 Server - Router <--> Other PCs Everything was simple, and I just had to forward all ports for incoming connection on the Livebox to the Router, and then forward the specific ports to the Server as needed (it must be however noted that any server I use is found on the Win2k8R2 server itself). In this previous configuration, the IP addresses were as follows: - Livebox 192.168.1.1 - Router 192.168.1.12 (when seen from Livebox) - Router 10.0.0.1 (when seen from server & PCs connected to it) - Server 10.0.0.2 - PCs 10.0.0.x So now of course, my port-forwarding does not work anymore since the server is not connected (directly) to the Router. What I would like to know is how do I configure the Livebox and Router to still have the features like before? From what I understand of networks (which is very limited, btw), I see these options: Make the router assign IPs like 192.168.1.x (but then I want the forwarding to be done from the router itself, is it possible?) The forwarding on the router to the server uses IP address 10.0.0.2. I could change it to 192.168.1.2 (Is that even possible, does it work?) Forward all ports from the Livebox itself to the server, and then manage them there (Is software-based port-forwarding as secure as hardware-based?)

Read the article

FreeBSD: problem with Postfix after updating LDAP

- by Olexandr

At the server I installed openldap-server, at this computer open-ldap client has already been installed. Version of openldap-client (2.4.16) was older then new openldap-server (2.4.21) and the version of client has updated too. OpenLDAP-client works with postfix on this server and after all updates postfix cann't start again. The error when postfix stop|start is: /libexec/ld-elf.so.1: Shared object "libldap-2.4.so.6" not found, required by "postfix" At the category with libraries is libldap-2.4.so.7, but libldap-2.4.so.6 is removed from the server. When I want to deinstall curently version of openldap-client, system write ===> Deinstalling for net/openldap24-client O.K., but when I start "make install" system write: ===> Installing for openldap-sasl-client-2.4.23 ===> openldap-sasl-client-2.4.23 depends on shared library: sasl2.2 - found ===> Generating temporary packing list ===> Checking if net/openldap24-client already installed ===> An older version of net/openldap24-client is already installed (openldap-client-2.4.21) You may wish to ``make deinstall'' and install this port again by ``make reinstall'' to upgrade it properly. If you really wish to overwrite the old port of net/openldap24-client without deleting it first, set the variable "FORCE_PKG_REGISTER" in your environment or the "make install" command line. *** Error code 1 Stop in /usr/ports/net/openldap24-client. *** Error code 1 Stop in /usr/ports/net/openldap24-client. Updating of ports doesn't help, and postfix writes error: /libexec/ld-elf.so.1: Shared object "libldap-2.4.so.6" not found, required by "postfix"

Read the article

Latitude D600 USB port problem

- by Moab

Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

Read the article

Windows 7 VPN only works if I connect it to itself first

- by user1799075

Just so you have some detail, VPN request are port forwarded from a linksys router hosting the global static IP (to the world) to the windows 7 machine. The ports have been added to the OK list. I have the incoming VPN connection setup on win 7 but the only way it will work from anywhere outside the physical machine is if I connect from itself to itself first. For example, let's say my internal static IP is 10.0.0.50 and incoming VPN server connection IP is 10.0.0.80 (both on the same machine). I can't connect via VPN from anywhere unless I first VPN from the machines .50 address back to itself on the .80 address. Once I do that, I can connect form anywhere, even my phone. It's as if once the machine reboots it thinks it should block requests on .80 until .50 connects first. BitDefender antivirus/firewall is loaded (windows firewall is off) I don't see anywhere to exclude ports in the BitDefender control panel. Maybe this initial connection opens the ports and tags them as safe because the initial request came from the same machine? Any thoughts? It's driving me nuts and I'm sick of having to drive half way across town over to the server, try to get building access and do the initial connection. Please help

Read the article

Tunnell network requests with Windows 7

- by mark

I've Windows 7 64bit Pro client in a private LAN behind a Netgear wgr614v7 router. I've also a remote Debian server machine outside. I'd like to tunnel all (or specified ports/protocols) over this outside server, so when I'm on the Windows machine and I request serverfault.com it would not appear from the wgr614v7 public IP but from the server. But it's not only about HTTP traffic, it's basically about everything I'd like to: other TCP ports, even UDP, etc. It must be transparent to the application, e.g. they shouldn't be aware of this. All their requests just appear as being from the server and the tunnel between them takes care about the packets. I'm aware of e.g. Putty and forwarding individual ports or using it as a socks proxy, however not many applications to support this and the support in windows itself looks non-existent to me. I might add it should be something "reasonable" easy to set up. I've heard about PPTP but I'm unsure about it's security implications (by design). Should I go for VPN? There seem to be two common solutions for Linux (OpenSwan and StrongSwan), why would I pick the one over the other? I also fear that setting up a VPN might be quite complex, OTOH maybe it's the only sane way to do the things right? Or is OpenVPN sufficient? I'm seeking for open (source) solutions, what other options to I have or which direction should I head to?

Read the article

com0com silent install (test signed com0com.sys shows up as signed in explorer but not in Device Manager)

- by Andrew

My goal is to have the com0com serial driver install without popping up the install wizard on both WinXP and Win2000. I am working on WinXP x86. I have followed the test signing instructions for the com0com driver, replacing amd64 with i386 at line 60. I have added my test certificate as both a root and trustedprovider using the following commands: certmgr /add com0com.cer /r localMachine root certmgr /add com0com.cer /r localMachine trustedprovider And verified that it is listed under both locations. I then run the newly built setup.exe. This installs the signed com0com.sys file into C:\WINDOWS\system32\DRIVERS and sets up a pair of virtual serial ports and a bus between them. Using explorer, I go to the DRIVERS directory, right click on the com0com.sys file and verify that it has the "test" digital signature. I then go into Device Manager, open the "com0com serial port emulators" entry, pick an entry and do Properties-Driver and see that it says "Not digitally signed". I click details for the driver and can see that it is referring to the com0com.sys driver file that I just confirmed is signed. I found what might be a related issue but I'm not sure. Does WinXP demand a WHQL signature? If so, does that explain why the com0com.sys file is signed but the device driver entries say they aren't signed?

Read the article

Dividing sections inside an omp parallel for : OpenMP

- by Sayan Ghosh

Hi, I have a situation like: #pragma omp parallel for private(i, j, k, val, p, l) for (i = 0; i < num1; i++) { for (j = 0; j < num2; j++) { for (k = 0; k < num3; k++) { val = m[i + j*somenum + k*2] if (val != 0) for (l = start; l <= end; l++) { someFunctionThatWritesIntoGlobalArray((i + l), j, k, (someFunctionThatGetsValueFromAnotherArray((i + l), j, k) * val)); } } } for (p = 0; p < num4; p++) { m[p] = 0; } } Thanks for reading, phew! Well I am noticing a very minor difference in the results (0.999967[omp] against 1[serial]), when I use the above (which is 3 times faster) against the serial implementation. Now I know I am doing a mistake here...especially the connection between loops is evident. Is it possible to parallelize this using omp sections? I tried some options like making shared(p) {doing this, I got correct values, as in the serial form}, but there was no speedup then. Any general advice on handling openmp pragmas over a slew of for loops would also be great for me!

Read the article

Transaction Isolation Level of Serializable not working for me

- by Shahriar

I have a website which is used by all branches of a store and what it does is that it records customer purchases into a table called myTransactions.myTransactions table has a column named SerialNumber.For each purchase i create a record in the transactions table and assign a serial to it.The stored procedure that does this calls a UDF function to get a new serialNumber before inserting the record.Like below : Create Procedure mytransaction_Insert as begin insert into myTransactions(column1,column2,column3,...SerialNumber) values( Value1 ,Value2,Value3,...., getTransactionNSerialNumber()) end Create function getTransactionNSerialNumber as begin RETURN isnull(SELECT TOP (1) SerialNumber FROM myTransactions READUNCOMMITTED ORDER BY SerialNumber DESC),0) + 1 end The website is being used by so many users in different stores at the same time and it is creating many duplicate serialNumbers(same SerialNumbers).So i added a Sql transaction with ReadCommitted level to the transaction and i still got duplicate transaction numbers.I changed it to SERIALIZABLE in order to lock the resources and i not only got duplicate transaction numbers(!!HOW!!) but i also got sporadic deadlocks between the same stored procedure calls.This is what i tried : (With ommissions of try catch blocks and rollbacks) Create Procedure mytransaction_Insert as begin SET TRANSACTION ISOLATION LEVEL SERIALIZABLE BEGIN TRASNACTION ins insert into myTransactions(column1,column2,column3,...SerialNumber) values( Value1 ,Value2 , Value3, ...., getTransactionNSerialNumber()) COMMIT TRANSACTION ins SET TRANSACTION ISOLATION READCOMMITTED end I even copied the function that gets the serial number directly into the stored procedure instead of the UDF function call and still got duplicate serialNumbers.So,How can a stored procedure line create something Like the c# lock() {} block. By the way,i have to implement the transaction serial number using the same pattern and i can't change the serialNumber to any other identity field or whatever.And for some reasons i need to generate the serialNumber inside the databse and i can't move SerialNumber generation to application level. Thank you.

Read the article

Which parts of the client certificate to use when uniquely identifying users?

- by miha

I'm designing a system where users will be able to register and afterward authenticate with client certificates in addition to username/password authentication. The client certificates will have to be valid certificates issued by a configured list of certificate authorities and will be checked (validated) when presented. In the registration phase, I need to store part(s) of the client certificate in a user repository (DB, LDAP, whatever) so that I can map the user who authenticates with client certificate to an internal "user". One fairly obvious choice would be to use certificate fingerprint; But fingerprint itself is not enough, since collisions may occur (even though they're not probable), so we need to store additional information from the certificate. This SO question is also informative in this regard. RFC 2459 defines (4.1.2.2) that certificate serial number must be unique within a given CA. With all of this combined, I'm thinking of storing certificate serial number and certificate issuer for each registered user. Given that client certificates will be verified and valid, this should uniquely identify each client certificate. That way, even when client certificate is renewed, it would still be valid (serial number stays the same, and so does the issuer). Did I miss something?

Read the article

Bitwise operators and converting an int to 2 bytes and back again.

- by aKiwi

first time user, Hi guys! So hopefully someone can help.. My background is php so entering the word of lowend stuff like, char is bytes, which are bits.. which is binary values.. etc is taking some time to get the hang of ;) What im trying to do here is sent some values from an Ardunio board to openFrameWorks (both are c++). What this script currently does (and works well for one sensor i might add) when asked for the data to be sent is.. int value_01 = analogRead(0); // which outputs between 0-1024 unsigned char val1; unsigned char val2; //some Complicated bitshift operation val1 = value_01 &0xFF; val2 = (value_01 >> 8) &0xFF; //send both bytes Serial.print(val1, BYTE); Serial.print(val2, BYTE); Apparently this is the most reliable way of getting the data across.. So now that it is send via serial port, the bytes are added to a char string and converted back by.. int num = ( (unsigned char)bytesReadString[1] << 8 | (unsigned char)bytesReadString[0] ); So to recap, im trying to get 4 sensors worth of data (which im assuming will be 8 of those serialprints?) and to have int num_01 - num_04... at the end of it all. Im assuming this (as with most things) might be quite easy for someone with experience in these concepts.. Any help would be greatly appreciated. Thanks

Read the article

JavaScript Regex: Complicated input validation

- by ScottSEA

I'm trying to construct a regex to screen valid part and/or serial numbers in combination, with ranges. A valid part number is a two alpha, three digit pattern or /[A-z]{2}\d{3}/ i.e. aa123 or ZZ443 etc... A valid serial number is a five digit pattern, or /\d{5}/ 13245 or 31234 and so on. That part isn't the problem. I want combinations and ranges to be valid as well: 12345, ab123,ab234-ab245, 12346 - 12349 - the ultimate goal. Ranges and/or series of part and/or serial numbers in any combination. Note that spaces are optional when specifying a range or after a comma in a series. Note that a range of part numbers has the same two letter combination on both sides of the range (i.e. ab123 - ab239) I have been wrestling with this expression for two days now, and haven't come up with anything better than this: /^(?:[A-z]{2}\d{3}[, ]*)|(?:\d{5}[, ]*)|(?:([A-z]{2})\d{3} ?- ?\4\d{3}[, ]*)|(?:\d{5} ?- ?\d{5}[, ]*)$/ ... My Regex-Fu is weak.

Read the article

multiple mysql_real_query() in while loop

- by Steve

It seems that when I have one mysql_real_query() function in a continuous while loop, the query will get executed OK. However, if multiple mysql_real_query() are inside the while loop, one right after the other. Depending on the query, sometimes neither the first query nor second query will execute properly. This seems like a threading issue to me. I'm wondering if the mysql c api has a way of dealing with this? Does anyone know how to deal with this? mysql_free_result() doesn't work since I am not even storing the results. //keep polling as long as stop character '-' is not read while(szRxChar != '-') { // Check if a read is outstanding if (HasOverlappedIoCompleted(&ovRead)) { // Issue a serial port read if (!ReadFile(hSerial,&szRxChar,1, &dwBytesRead,&ovRead)) { DWORD dwErr = GetLastError(); if (dwErr!=ERROR_IO_PENDING) return dwErr; } } // Wait 5 seconds for serial input if (!(HasOverlappedIoCompleted(&ovRead))) { WaitForSingleObject(hReadEvent,RESET_TIME); } // Check if serial input has arrived if (GetOverlappedResult(hSerial,&ovRead, &dwBytesRead,FALSE)) { // Wait for the write GetOverlappedResult(hSerial,&ovWrite, &dwBytesWritten,TRUE); //load tagBuffer with byte stream tagBuffer[i] = szRxChar; i++; tagBuffer[i] = 0; //char arrays are \0 terminated //run query with tagBuffer if( strlen(tagBuffer)==PACKET_LENGTH ) { sprintf(query,"insert into scan (rfidnum) values ('"); strcat(query, tagBuffer); strcat(query, "')"); mysql_real_query(&mysql,query,(unsigned int)strlen(query)); i=0; } mysql_real_query(&mysql,"insert into scan (rfidnum) values ('2nd query')",(unsigned int)strlen("insert into scan (rfid) values ('2nd query')")); mysql_free_result(res); } }

Read the article

Using TPL and PLINQ to raise performance of feed aggregator

- by DigiMortal

In this posting I will show you how to use Task Parallel Library (TPL) and PLINQ features to boost performance of simple RSS-feed aggregator. I will use here only very basic .NET classes that almost every developer starts from when learning parallel programming. Of course, we will also measure how every optimization affects performance of feed aggregator. Feed aggregator Our feed aggregator works as follows: Load list of blogs Download RSS-feed Parse feed XML Add new posts to database Our feed aggregator is run by task scheduler after every 15 minutes by example. We will start our journey with serial implementation of feed aggregator. Second step is to use task parallelism and parallelize feeds downloading and parsing. And our last step is to use data parallelism to parallelize database operations. We will use Stopwatch class to measure how much time it takes for aggregator to download and insert all posts from all registered blogs. After every run we empty posts table in database. Serial aggregation Before doing parallel stuff let’s take a look at serial implementation of feed aggregator. All tasks happen one after other. internal class FeedClient { private readonly INewsService _newsService; private const int FeedItemContentMaxLength = 255; public FeedClient() { ObjectFactory.Initialize(container => { container.PullConfigurationFromAppConfig = true; }); _newsService = ObjectFactory.GetInstance<INewsService>(); } public void Execute() { var blogs = _newsService.ListPublishedBlogs(); for (var index = 0; index <blogs.Count; index++) { ImportFeed(blogs[index]); } } private void ImportFeed(BlogDto blog) { if(blog == null) return; if (string.IsNullOrEmpty(blog.RssUrl)) return; var uri = new Uri(blog.RssUrl); SyndicationContentFormat feedFormat; feedFormat = SyndicationDiscoveryUtility.SyndicationContentFormatGet(uri); if (feedFormat == SyndicationContentFormat.Rss) ImportRssFeed(blog); if (feedFormat == SyndicationContentFormat.Atom) ImportAtomFeed(blog); } private void ImportRssFeed(BlogDto blog) { var uri = new Uri(blog.RssUrl); var feed = RssFeed.Create(uri); foreach (var item in feed.Channel.Items) { SaveRssFeedItem(item, blog.Id, blog.CreatedById); } } private void ImportAtomFeed(BlogDto blog) { var uri = new Uri(blog.RssUrl); var feed = AtomFeed.Create(uri); foreach (var item in feed.Entries) { SaveAtomFeedEntry(item, blog.Id, blog.CreatedById); } } } Serial implementation of feed aggregator downloads and inserts all posts with 25.46 seconds. Task parallelism Task parallelism means that separate tasks are run in parallel. You can find out more about task parallelism from MSDN page Task Parallelism (Task Parallel Library) and Wikipedia page Task parallelism. Although finding parts of code that can run safely in parallel without synchronization issues is not easy task we are lucky this time. Feeds import and parsing is perfect candidate for parallel tasks. We can safely parallelize feeds import because importing tasks doesn’t share any resources and therefore they don’t also need any synchronization. After getting the list of blogs we iterate through the collection and start new TPL task for each blog feed aggregation. internal class FeedClient { private readonly INewsService _newsService; private const int FeedItemContentMaxLength = 255; public FeedClient() { ObjectFactory.Initialize(container => { container.PullConfigurationFromAppConfig = true; }); _newsService = ObjectFactory.GetInstance<INewsService>(); } public void Execute() { var blogs = _newsService.ListPublishedBlogs(); var tasks = new Task[blogs.Count]; for (var index = 0; index <blogs.Count; index++) { tasks[index] = new Task(ImportFeed, blogs[index]); tasks[index].Start(); } Task.WaitAll(tasks); } private void ImportFeed(object blogObject) { if(blogObject == null) return; var blog = (BlogDto)blogObject; if (string.IsNullOrEmpty(blog.RssUrl)) return; var uri = new Uri(blog.RssUrl); SyndicationContentFormat feedFormat; feedFormat = SyndicationDiscoveryUtility.SyndicationContentFormatGet(uri); if (feedFormat == SyndicationContentFormat.Rss) ImportRssFeed(blog); if (feedFormat == SyndicationContentFormat.Atom) ImportAtomFeed(blog); } private void ImportRssFeed(BlogDto blog) { var uri = new Uri(blog.RssUrl); var feed = RssFeed.Create(uri); foreach (var item in feed.Channel.Items) { SaveRssFeedItem(item, blog.Id, blog.CreatedById); } } private void ImportAtomFeed(BlogDto blog) { var uri = new Uri(blog.RssUrl); var feed = AtomFeed.Create(uri); foreach (var item in feed.Entries) { SaveAtomFeedEntry(item, blog.Id, blog.CreatedById); } } } You should notice first signs of the power of TPL. We made only minor changes to our code to parallelize blog feeds aggregating. On my machine this modification gives some performance boost – time is now 17.57 seconds. Data parallelism There is one more way how to parallelize activities. Previous section introduced task or operation based parallelism, this section introduces data based parallelism. By MSDN page Data Parallelism (Task Parallel Library) data parallelism refers to scenario in which the same operation is performed concurrently on elements in a source collection or array. In our code we have independent collections we can process in parallel – imported feed entries. As checking for feed entry existence and inserting it if it is missing from database doesn’t affect other entries the imported feed entries collection is ideal candidate for parallelization. internal class FeedClient { private readonly INewsService _newsService; private const int FeedItemContentMaxLength = 255; public FeedClient() { ObjectFactory.Initialize(container => { container.PullConfigurationFromAppConfig = true; }); _newsService = ObjectFactory.GetInstance<INewsService>(); } public void Execute() { var blogs = _newsService.ListPublishedBlogs(); var tasks = new Task[blogs.Count]; for (var index = 0; index <blogs.Count; index++) { tasks[index] = new Task(ImportFeed, blogs[index]); tasks[index].Start(); } Task.WaitAll(tasks); } private void ImportFeed(object blogObject) { if(blogObject == null) return; var blog = (BlogDto)blogObject; if (string.IsNullOrEmpty(blog.RssUrl)) return; var uri = new Uri(blog.RssUrl); SyndicationContentFormat feedFormat; feedFormat = SyndicationDiscoveryUtility.SyndicationContentFormatGet(uri); if (feedFormat == SyndicationContentFormat.Rss) ImportRssFeed(blog); if (feedFormat == SyndicationContentFormat.Atom) ImportAtomFeed(blog); } private void ImportRssFeed(BlogDto blog) { var uri = new Uri(blog.RssUrl); var feed = RssFeed.Create(uri); feed.Channel.Items.AsParallel().ForAll(a => { SaveRssFeedItem(a, blog.Id, blog.CreatedById); }); } private void ImportAtomFeed(BlogDto blog) { var uri = new Uri(blog.RssUrl); var feed = AtomFeed.Create(uri); feed.Entries.AsParallel().ForAll(a => { SaveAtomFeedEntry(a, blog.Id, blog.CreatedById); }); } } We did small change again and as the result we parallelized checking and saving of feed items. This change was data centric as we applied same operation to all elements in collection. On my machine I got better performance again. Time is now 11.22 seconds. Results Let’s visualize our measurement results (numbers are given in seconds). As we can see then with task parallelism feed aggregation takes about 25% less time than in original case. When adding data parallelism to task parallelism our aggregation takes about 2.3 times less time than in original case. More about TPL and PLINQ Adding parallelism to your application can be very challenging task. You have to carefully find out parts of your code where you can safely go to parallel processing and even then you have to measure the effects of parallel processing to find out if parallel code performs better. If you are not careful then troubles you will face later are worse than ones you have seen before (imagine error that occurs by average only once per 10000 code runs). Parallel programming is something that is hard to ignore. Effective programs are able to use multiple cores of processors. Using TPL you can also set degree of parallelism so your application doesn’t use all computing cores and leaves one or more of them free for host system and other processes. And there are many more things in TPL that make it easier for you to start and go on with parallel programming. In next major version all .NET languages will have built-in support for parallel programming. There will be also new language constructs that support parallel programming. Currently you can download Visual Studio Async to get some idea about what is coming. Conclusion Parallel programming is very challenging but good tools offered by Visual Studio and .NET Framework make it way easier for us. In this posting we started with feed aggregator that imports feed items on serial mode. With two steps we parallelized feed importing and entries inserting gaining 2.3 times raise in performance. Although this number is specific to my test environment it shows clearly that parallel programming may raise the performance of your application significantly.

Read the article

cant do port forwarding ro my webrick server to access it from the net!!

- by fenec

i am developing a facebook app and i am using for that facebooker plugin and webrick server. i have configured correctly my router to froward ports to my machine for 2 ports (80 and 3000) the apache server can be accessed from the net http://ip:80 amd the webrick server can http://ip:3000 , i dont understand why , please help me.

Read the article

method to find my UDP socket's "real" port?

- by yairchu

Is there any free service to which I could send a UDP packet and it would respond telling me what is my "real" UDP port? (my application is behind a NAT) This kind of service could allow me to make a p2p coordination server with normal php hosting. The p2p clients would know their UDP ports from this service They will then contact my server over HTTP (which is what regular web hosting allows) and tell it their port (and ip, which is normally supplied to cgi scripts) My server will give the clients the IP addresses and ports of the other clients.

Read the article

How to communicate with "Microsoft ACPI-Compliant Embedded Controller" driver?

- by YT

I'd like to communicate with an Embedded Controller device in a Notebook through I/O ports 62/66. When running on XP, the communication might collide with "Microsoft ACPI-Compliant Embedded Controller" driver which does the same thing. Therefore, I’d like to know whether (and how) I can communicate with I/O ports 62/66 using this driver. In addition, any informative link about what this driver is doing and how, will be highly appreciated.

Read the article

Attempt to connect to port leads to "Timeout Error"

- by George

Until recently, I have been able to forward ports just fine. I have no firewall and have not changed my ISP or router. When I scan my ports the result i always get is "Timeout".

Read the article

Error installing pkgconfig via macports

- by Greg K

I installed Macports 1.8.2 from a DMG. That seemed to install fine. I ran sudo port selfupdate to make sure my ports tree was current. I then tried to install bindfs as I want to mount some directories in my OS X file system (like you can do with mount --bind in linux). pkgconfig and macfuse are two dependencies of bindfs. I had trouble installing bindfs due to errors installing pkgconfig, so I tried to just install pkgconfig, here's the debug output from sudo port install pkgconfig: $ sudo port -d install pkgconfig DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. ---> Computing dependencies for pkgconfig DEBUG: Executing org.macports.main (pkgconfig) DEBUG: Skipping completed org.macports.fetch (pkgconfig) DEBUG: Skipping completed org.macports.checksum (pkgconfig) DEBUG: Skipping completed org.macports.extract (pkgconfig) DEBUG: Skipping completed org.macports.patch (pkgconfig) ---> Configuring pkgconfig DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: Executing org.macports.configure (pkgconfig) DEBUG: Environment: CFLAGS='-O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC='/usr/bin/gcc-4.2' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking whether to enable maintainer-specific portions of Makefiles... no checking build system type... i386-apple-darwin10.3.0 checking host system type... i386-apple-darwin10.3.0 checking for style of include used by make... none checking for gcc... /usr/bin/gcc-4.2 checking for C compiler default output file name... configure: error: C compiler cannot create executables See `config.log' for more details. Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/work/pkg-config-0.23" && ./configure --prefix=/opt/local --enable-indirect-deps --with-pc-path=/opt/local/lib/pkgconfig:/opt/local/share/pkgconfig " returned error 77 while executing "$procedure $targetname" Warning: the following items did not execute (for pkgconfig): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. I have only recently installed Xcode 3.2.2 (prior to installing macports). Am I right in thinking this the issue here: configure: error: C compiler cannot create executables

Read the article

how to troubleshoot using rsyslog to output to a mysql database

- by ChrisNZ

Using FreeBSD 8.0 32 bit. I have installed rsyslogd 5.5.5 with ommysql. (installed ports /usr/ports/sysutils/rsyslog55 and /usr/ports/sysutils/rsyslog55-mysql) My rsyslog.conf file looks like: $ModLoad imudp $ModLoad imtcp $ModLoad ommysql $ModLoad immark.so $ModLoad imuxsock.so $ModLoad imklog.so $OptimizeForUniprocessor on $AllowedSender UDP, 10.0.0.0/8 $UDPServerAddress 0.0.0.0 $UDPServerRun 514 $UDPServerTimeRequery 2 # +SG560 *.* :ommysql:127.0.0.1,Syslog,sysloguser,mypassword My command line flags for rsyslogd are: -c5 -4 Checking the code with -c5 -N1 returns no errors. I have confirmed that rsyslogd is working by changing the last line to say: *.* /var/log/snapgear.log which results in messages appearing in the snapgear.log file. So it is probably something to do with my MySQL setup If I do: mysql -u sysloguser -p Syslog Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 56 Server version: 5.0.86 FreeBSD port: mysql-server-5.0.86 mysql> select * from SystemEvents; Empty set (0.00 sec) mysql> :-( I have confirmed that sysloguser has full privileges for the Syslog database. If I run rsyslogd on the console in debug mode: /usr/local/sbin/rsyslogd -f /usr/local/etc/rsyslog.conf -c5 -n -d I can see this sequence of events each time a message is received: 9244.376687256:28359280: main Q: entry added, size now log 1, phys 1 entries 9244.376705694:28359280: main Q: EnqueueMsg advised worker start 9244.376726647:28359280: Listening on UDP syslogd socket 4 (IPv4/port 514). 9244.376728602:28359280: --------imUDP calling select, active file descriptors (max 4): 4 9244.376890075:283593c0: wti 0x28306e80: worker awoke from idle processing 9244.376892031:283593c0: we deleted 0 objects and enqueued 0 objects 9244.376893986:283593c0: delete batch from store, new sizes: log 1, phys 1 9244.376895942:283593c0: msgConsumer processes msg 0/1 9244.376897898:283593c0: msg parser: flags 70, from '~NOTRESOLVED~', msg 'Jun 29 17:32:24 SG560 kernel: (20000629T1732244' 9244.376900132:283593c0: parse using parser list 0x283080e8 (the default list). 9244.376902088:283593c0: dropped LF at very end of message (DropTrailingLF is set) 9244.376904044:283593c0: Parser 'rsyslog.rfc5424' returned -2160 9244.376905999:283593c0: Message will now be parsed by the legacy syslog parser (one size fits all... ;)). 9244.376907955:283593c0: Parser 'rsyslog.rfc3164' returned 0 9244.376909910:283593c0: testing filter, f_pmask 255 9244.376911866:283593c0: Called action, logging to ommysql 9244.376918012:283593c0: actionTryResume: action state: susp, next retry (if applicable): 1277869250 [now 1277869244] 9244.376919967:283593c0: action call returned -2123 9244.376921923:283593c0: tryDoAction: unexpected error code -2123, finalizing 9244.376926113:283593c0: actionTryResume: action state: susp, next retry (if applicable): 1277869250 [now 1277869244] 9244.376928069:283593c0: ruleset: get iRet 0 from rule.ProcessMsg() 9244.376930024:283593c0: ruleset.ProcessMsg() returns 0 9244.376931980:283593c0: regular consumer finished, iret=0, szlog 0 sz phys 1 9244.376933936:283593c0: XXX: enqueueing data element 0 of 1 9244.376935891:283593c0: we deleted 1 objects and enqueued 0 objects 9244.376938126:283593c0: delete batch from store, new sizes: log 0, phys 0 9244.376940082:283593c0: regular consumer finished, iret=4, szlog 0 sz phys 0 9244.376942037:283593c0: main Q:Reg/w0: worker IDLE, waiting for work. .... I can see the Action Call to ommysql returns unexpected error code -2123 Now I am stuck! Any ideas on what to look for next? Perhaps I there are extra ports I need to install? I will be very grateful for any assistance here!

Read the article

Problem installing Cardbus/PCMCIA drivers (USB 2.0 2-port)

- by Carl

I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

Read the article

Basic networking problem with Ubuntu 9.04 on Acer Extensa 5635Z laptop

- by sapporo

I just installed Ubuntu 9.04 on a brand new Acer Extensa 5635Z laptop, but ethernet networking does't work (wireless doesn't work either, but I'd be happy with ethernet for now). eth0 isn't listed in /etc/network/interfaces: $ cat /etc/network/interfaces auto lo iface lo inet loopback lshw does show the nic, but I can't make much sense out of the information: $ sudo lshw -class network -sanitize *-network DISABLED description: Wireless interface product: AR928X Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:07:00.0 logical name: wmaster0 version: 01 serial: [REMOVED] width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath9k latency=0 module=ath9k multicast=yes wireless=IEEE 802.11bgn *-network UNCLAIMED description: Ethernet controller product: Attansic Technology Corp. vendor: Attansic Technology Corp. physical id: 0 bus info: pci@0000:09:00.0 version: c0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list configuration: latency=0 *-network DISABLED description: Ethernet interface physical id: 1 logical name: pan0 serial: [REMOVED] capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes Thanks for your help!

Search Results

Search found 4296 results on 172 pages for 'serial ports'.

Page 45/172 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52 | Next Page >

- by Ako

- by krisdigitx

- by Adam Brand

- by pboin

- by Yusuf

- by Olexandr

- by Moab

- by user1799075

- by mark

- by Andrew

- by Sayan Ghosh

- by Shahriar

- by miha

- by aKiwi

- by ScottSEA

- by Steve

- by DigiMortal

- by fenec

- by yairchu

- by YT

- by George

- by Greg K

- by ChrisNZ

- by Carl

- by sapporo

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52 | Next Page >