Search Results

Search found 1570 results on 63 pages for 'sockets'.

Page 45/63 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

  • Apache restart on Ubuntu - error “could not bind to address 0.0.0.0:80”

    - by william
    I'm a n00b - trying to get apache2 set up on Ubuntu 9.10 (Karmic Koala) on Rackspace Cloud. I have set up/configured OpenSSL and installed Apache, but Apache won't start. I assume its a misconfiguration in my /etc/apache2/sites-available/ssl or /etc/apache2/sites-available/default files) When I try to restart apache using the command: sudo /etc/init.d/apache2 restart I get the following error message: [error] (EAI 2)Name or service not known: Could not resolve host name *.80 -- ignoring! [error] (EAI 2)Name or service not known: Could not resolve host name *.80 -- ignoring! (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs ...fail! For my /etc/apache2/sites-available/ssl I have used a virtual host of *:443. For my /etc/apache2/sites-available/default i have used a virtual host of *:80

    Read the article

  • Can't connect to STunnel when it's running as a service

    - by John Francis
    I've got STunnel configured to proxy non SSL POP3 requests to GMail on port 111. This is working fine when STunnel is running as a desktop app, but when I run the STunnel service, I can't connect to port 111 on the machine (using Outlook Express for example). The Stunnel log file shows the port binding is succeeding, but it never sees a connection. There's something preventing the connection to that port when STunnel is running as a service? Here's stunnel.conf cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [gmail] accept = 127.0.0.1:111 connect = pop.gmail.com:995 stunnel.log from service 2010.10.07 12:14:22 LOG5[80444:72984]: Reading configuration from file stunnel.conf 2010.10.07 12:14:22 LOG7[80444:72984]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: PRNG seeded successfully 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate loaded 2010.10.07 12:14:23 LOG7[80444:72984]: Key file: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Private key loaded 2010.10.07 12:14:23 LOG7[80444:72984]: SSL context initialized for service gmail 2010.10.07 12:14:23 LOG5[80444:72984]: Configuration successful 2010.10.07 12:14:23 LOG5[80444:72984]: No limit detected for the number of clients 2010.10.07 12:14:23 LOG7[80444:72984]: FD=156 in non-blocking mode 2010.10.07 12:14:23 LOG7[80444:72984]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail opened FD=156 2010.10.07 12:14:23 LOG5[80444:72984]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:14:23 LOG5[80444:72984]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 stunnel.log from desktop (working) process 2010.10.07 12:10:31 LOG5[80824:81200]: Reading configuration from file stunnel.conf 2010.10.07 12:10:31 LOG7[80824:81200]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: PRNG seeded successfully 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate loaded 2010.10.07 12:10:32 LOG7[80824:81200]: Key file: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Private key loaded 2010.10.07 12:10:32 LOG7[80824:81200]: SSL context initialized for service gmail 2010.10.07 12:10:32 LOG5[80824:81200]: Configuration successful 2010.10.07 12:10:32 LOG5[80824:81200]: No limit detected for the number of clients 2010.10.07 12:10:32 LOG7[80824:81200]: FD=156 in non-blocking mode 2010.10.07 12:10:32 LOG7[80824:81200]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail opened FD=156 2010.10.07 12:10:33 LOG5[80824:81200]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:10:33 LOG5[80824:81200]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.10.07 12:10:33 LOG7[80824:81844]: Service gmail accepted FD=188 from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:81844]: Creating a new thread 2010.10.07 12:10:33 LOG7[80824:81844]: New thread created 2010.10.07 12:10:33 LOG7[80824:25144]: Service gmail started 2010.10.07 12:10:33 LOG7[80824:25144]: FD=188 in non-blocking mode 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on local socket 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail accepted connection from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:25144]: FD=212 in non-blocking mode 2010.10.07 12:10:33 LOG6[80824:25144]: connect_blocking: connecting 209.85.227.109:995 2010.10.07 12:10:33 LOG7[80824:25144]: connect_blocking: s_poll_wait 209.85.227.109:995: waiting 10 seconds 2010.10.07 12:10:33 LOG5[80824:25144]: connect_blocking: connected 209.85.227.109:995 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail connected remote server from 192.168.1.9:24814 2010.10.07 12:10:33 LOG7[80824:25144]: Remote FD=212 initialized 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on remote socket 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): before/connect initialization 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server certificate A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server done A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client key exchange A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write change cipher spec A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write finished A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 flush data 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read finished A 2010.10.07 12:10:33 LOG7[80824:25144]: 1 items in the session cache 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects (SSL_connect()) 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 client renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects (SSL_accept()) 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 external session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache misses 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache timeouts 2010.10.07 12:10:33 LOG6[80824:25144]: SSL connected: new session negotiated 2010.10.07 12:10:33 LOG6[80824:25144]: Negotiated ciphers: RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 2010.10.07 12:10:34 LOG7[80824:25144]: SSL socket closed on SSL_read 2010.10.07 12:10:34 LOG7[80824:25144]: Sending socket write shutdown 2010.10.07 12:10:34 LOG5[80824:25144]: Connection closed: 53 bytes sent to SSL, 118 bytes sent to socket 2010.10.07 12:10:34 LOG7[80824:25144]: Service gmail finished (0 left)

    Read the article

  • UPS: Do i require a special extension cord for power in?

    - by rism
    I have a couple of Tripplite UPS systems. The power in cables are bright orange and about 2 meters in length. I want to put the system on the other side of the room but for some reason the UPS keep "going off" over there. So I guess the wall power sockets on that side of the room are a little dodgy. So i figured Id just go online and get some replacement UPS power IN (from wall to UPS) cables of an appropriate length. But i cant find any anywhere. (auction sites, tripplite store, cable websites). So now I'm wondering if that's just because you can use a standard extension cord of an appropriate wattage? I thought the UPS power IN cables were "special". Is that not so?

    Read the article

  • Ubuntu Upstart script hangs on start and stop

    - by sbwoodside
    I have an upstart script that will start a custom jetty server. When I do sudo start [myservice] nothing happens. Subsequently, sudo status [myservice] show it as: [myservice] start/killed, process 3586. Here's the script in /etc/init/[myservice].conf: description "[description]" author "[my name and email]" start on runlevel [2345] stop on runlevel [016] respawn expect fork script sudo -u www-data /path/to/grafserv-start.sh >> /tmp/upstart.log 2>&1 end-script And here is grafserv-start.sh: #!/bin/bash /usr/bin/java -Djetty.port=3070 -jar /path/to/grafserv/trunk/start.jar echo "Done starting GrafServ" I've tried redirecting the output of the script command to a tmp logfile, but that file is never created. When I start it, I just get a hang, until I ^C. Also, I tried running it with strace but that gave me a lot of stuff about sockets.

    Read the article

  • NGINX + PHP FPM connect() failed (110: Connection timed out) while connecting to upstream

    - by Leonard Teo
    We're running a fairly large site using nginx and PHP-FPM and we're getting a lot of errors as the site load is quite high. We're getting "connect() failed (110: Connection timed out) while connecting to upstream"...upstream: "fastcgi://127.0.0.1:9000" Here's my config file for PHP-FPM. PHP-FPM: [www] listen = 127.0.0.1:9000 listen.allowed_clients = 127.0.0.1 user = nginx group = nginx pm = dynamic pm.max_children = 100 pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 pm.max_requests = 100 slowlog = /var/log/php-fpm/www-slow.log php_admin_value[error_log] = /var/log/php-fpm/www-error.log php_admin_flag[log_errors] = on What's the recommended config/number of servers/children for a high traffic site? We tried using Unix Sockets instead of TCP and got no noticeable improvements. Right now the errors are: connect() to unix:/var/run/php-fcgi.sock failed (11: Resource temporarily unavailable) while connecting to upstream...upstream: "fastcgi://unix:/var/run/php-fcgi.sock:"... Thanks, Leonard

    Read the article

  • Apache is running; however, it reports that it is not, and it will not restart.

    - by solo
    Apache is running; however, it reports that it is not, and it will not restart. # /etc/init.d/httpd status httpd.worker is stopped # /usr/sbin/lsof -iTCP:80 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME httpd.wor 1169 root 3u IPv6 2974 TCP *:http (LISTEN) httpd.wor 1211 daemon 3u IPv6 2974 TCP *:http (LISTEN) httpd.wor 1213 daemon 3u IPv6 2974 TCP *:http (LISTEN) httpd.wor 1215 daemon 3u IPv6 2974 TCP *:http (LISTEN) httpd.wor 1352 daemon 3u IPv6 2974 TCP *:http (LISTEN) #/etc/init.d/httpd restart Stopping httpd: [FAILED] Starting httpd: [Wed Mar 24 10:33:51 2010] [warn] module proxy_ajp_module is already loaded, skipping (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs [FAILED] OS: Linux DISTRO: CENTOS 5 Restarting the server didn't help, nor did killing apache and starting it. Any idea what is causing this inconsistency?

    Read the article

  • Can't connect to STunnel when it's running as a service

    - by John Francis
    I've got STunnel configured to proxy non SSL POP3 requests to GMail on port 111. This is working fine when STunnel is running as a desktop app, but when I run the STunnel service, I can't connect to port 111 on the machine (using Outlook Express for example). The Stunnel log file shows the port binding is succeeding, but it never sees a connection. There's something preventing the connection to that port when STunnel is running as a service? Here's stunnel.conf cert = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [gmail] accept = 127.0.0.1:111 connect = pop.gmail.com:995 stunnel.log from service 2010.10.07 12:14:22 LOG5[80444:72984]: Reading configuration from file stunnel.conf 2010.10.07 12:14:22 LOG7[80444:72984]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:14:23 LOG7[80444:72984]: PRNG seeded successfully 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Certificate loaded 2010.10.07 12:14:23 LOG7[80444:72984]: Key file: stunnel.pem 2010.10.07 12:14:23 LOG7[80444:72984]: Private key loaded 2010.10.07 12:14:23 LOG7[80444:72984]: SSL context initialized for service gmail 2010.10.07 12:14:23 LOG5[80444:72984]: Configuration successful 2010.10.07 12:14:23 LOG5[80444:72984]: No limit detected for the number of clients 2010.10.07 12:14:23 LOG7[80444:72984]: FD=156 in non-blocking mode 2010.10.07 12:14:23 LOG7[80444:72984]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:14:23 LOG7[80444:72984]: Service gmail opened FD=156 2010.10.07 12:14:23 LOG5[80444:72984]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:14:23 LOG5[80444:72984]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 stunnel.log from desktop (working) process 2010.10.07 12:10:31 LOG5[80824:81200]: Reading configuration from file stunnel.conf 2010.10.07 12:10:31 LOG7[80824:81200]: Snagged 64 random bytes from C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: Wrote 1024 new random bytes to C:/.rnd 2010.10.07 12:10:32 LOG7[80824:81200]: PRNG seeded successfully 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Certificate loaded 2010.10.07 12:10:32 LOG7[80824:81200]: Key file: stunnel.pem 2010.10.07 12:10:32 LOG7[80824:81200]: Private key loaded 2010.10.07 12:10:32 LOG7[80824:81200]: SSL context initialized for service gmail 2010.10.07 12:10:32 LOG5[80824:81200]: Configuration successful 2010.10.07 12:10:32 LOG5[80824:81200]: No limit detected for the number of clients 2010.10.07 12:10:32 LOG7[80824:81200]: FD=156 in non-blocking mode 2010.10.07 12:10:32 LOG7[80824:81200]: Option SO_REUSEADDR set on accept socket 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail bound to 0.0.0.0:111 2010.10.07 12:10:32 LOG7[80824:81200]: Service gmail opened FD=156 2010.10.07 12:10:33 LOG5[80824:81200]: stunnel 4.34 on x86-pc-mingw32-gnu with OpenSSL 1.0.0a 1 Jun 2010 2010.10.07 12:10:33 LOG5[80824:81200]: Threading:WIN32 SSL:ENGINE Sockets:SELECT,IPv6 2010.10.07 12:10:33 LOG7[80824:81844]: Service gmail accepted FD=188 from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:81844]: Creating a new thread 2010.10.07 12:10:33 LOG7[80824:81844]: New thread created 2010.10.07 12:10:33 LOG7[80824:25144]: Service gmail started 2010.10.07 12:10:33 LOG7[80824:25144]: FD=188 in non-blocking mode 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on local socket 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail accepted connection from 127.0.0.1:24813 2010.10.07 12:10:33 LOG7[80824:25144]: FD=212 in non-blocking mode 2010.10.07 12:10:33 LOG6[80824:25144]: connect_blocking: connecting 209.85.227.109:995 2010.10.07 12:10:33 LOG7[80824:25144]: connect_blocking: s_poll_wait 209.85.227.109:995: waiting 10 seconds 2010.10.07 12:10:33 LOG5[80824:25144]: connect_blocking: connected 209.85.227.109:995 2010.10.07 12:10:33 LOG5[80824:25144]: Service gmail connected remote server from 192.168.1.9:24814 2010.10.07 12:10:33 LOG7[80824:25144]: Remote FD=212 initialized 2010.10.07 12:10:33 LOG7[80824:25144]: Option TCP_NODELAY set on remote socket 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): before/connect initialization 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server hello A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server certificate A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read server done A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write client key exchange A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write change cipher spec A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 write finished A 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 flush data 2010.10.07 12:10:33 LOG7[80824:25144]: SSL state (connect): SSLv3 read finished A 2010.10.07 12:10:33 LOG7[80824:25144]: 1 items in the session cache 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects (SSL_connect()) 2010.10.07 12:10:33 LOG7[80824:25144]: 1 client connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 client renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects (SSL_accept()) 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server connects that finished 2010.10.07 12:10:33 LOG7[80824:25144]: 0 server renegotiations requested 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 external session cache hits 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache misses 2010.10.07 12:10:33 LOG7[80824:25144]: 0 session cache timeouts 2010.10.07 12:10:33 LOG6[80824:25144]: SSL connected: new session negotiated 2010.10.07 12:10:33 LOG6[80824:25144]: Negotiated ciphers: RC4-MD5 SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=MD5 2010.10.07 12:10:34 LOG7[80824:25144]: SSL socket closed on SSL_read 2010.10.07 12:10:34 LOG7[80824:25144]: Sending socket write shutdown 2010.10.07 12:10:34 LOG5[80824:25144]: Connection closed: 53 bytes sent to SSL, 118 bytes sent to socket 2010.10.07 12:10:34 LOG7[80824:25144]: Service gmail finished (0 left)

    Read the article

  • Windows 7 recognises the wrong router.

    - by Henry
    I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly, when my dual boot machine is in XP or off. However, when I go into Win 7 on that machine it finds the ADSL router and wants to connect through that (there's no ADSL connection) instead of my cable router and modem. I've turned DHCP off on the ADSL modem and even tried bridging its connections but neither of these have any effect. To get 7 connected, I have to either disconnect the ADSL router, or switch it off. Remember, the SAME computer on the same LAN works perfectly with the same router connected in XP! How then, can I get Win 7 to recognise the correct router?

    Read the article

  • Troubleshooting web timeouts with a Belkin router

    - by rexzilla
    I have a Belkin FSD7632-4 ADSL wifi router. Ever since I got it, I've faced this problem of websites timing out. For example, I go to flickr.com, and the images won't load because they come from farm1.static.flickr.com. Either I wait 10 minutes or so until the timed out sockets are closed and retry (with variable results) or I reboot the router. This happens irrespective of whether I use wired or wifi network. I'm in India, using Airtel Broadband, and if I use my ISP supplied Beetel 220BX ADSL router (which has no wifi and only one LAN port), everything works fine. I copied over the broadband settings from my old router: VPI/VCI values=1/32 Encapsulation=LLC MTU=1492 I have not enabled any firewall on the router. Is there anything else I can try? Or is it a defect with the router and should I take it back for a replacement? I bought it just 2 months ago.

    Read the article

  • GNU screen - Unable to reattach to screen after lost connection

    - by subhashish
    I was using irssi in screen but lost connection. After I ssh'd back in to the server, I can no longer attach to that screen. screen -ls shows that the screen is already attached. I tried screen -D to force detach it, and it said detach but screen -ls still says it's attached. I tried screen -x and it just hangs there. [sub@server ~]$ screen -ls There are screens on: 4033.poe (Detached) 7728.irssi (Attached) 2 Sockets in /var/run/screen/S-sub. What can I do now?

    Read the article

  • Not able to connect to perforce server outside of localhost

    - by bobber205
    My setup is a Qwest PK5000 router with a Linksys router running Tomato. I have DMZ pointed towards my router. (The server is on the tomato router). I tried my applications that open up sockets and Utorrent (port 6883) and I ended having to do advanced port forwarding and forward specific ports in addition to having DMZ on my router. The problem is that I cannot connect to perforce when on another machine on the LAN or off. Any ideas? :) Thanks!

    Read the article

  • How to run node.js app on port 80? Are processes blocking my port?

    - by Lucas
    I believe the port 80 on my remote instance is blocked, and I am trying to run a node.js app using port 80. I have experimented with ports 3000 and 3002, and both ports are working fine, but I get an error when running on port 80. I suspect port 80 is blocked from my output of netstat -an below, but how can I find the process id's of the addresses that are blocking port 80 below? [lucas@ecoinstance]~/node/nodetest1$ netstat -an Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:3002 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:27017 127.0.0.1:51108 ESTABLISHED tcp 0 0 127.0.0.1:51106 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51106 ESTABLISHED tcp 0 0 127.0.0.1:51107 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:3002 174.61.171.61:36583 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51109 ESTABLISHED tcp 0 0 10.240.241.116:42423 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51108 127.0.0.1:27017 ESTABLISHED tcp 0 532 10.240.241.116:22 174.61.171.61:56824 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51107 ESTABLISHED tcp 0 0 10.240.241.116:42412 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51109 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:51105 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:42422 169.254.169.254:80 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51105 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN udp 0 0 0.0.0.0:49948 0.0.0.0:* udp 0 0 0.0.0.0:68 0.0.0.0:* udp 0 0 10.240.241.116:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp6 0 0 :::12151 :::* udp6 0 0 :::123 :::* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 405680 /tmp/ssh-KdkxJfFLpKTC/agent.22 813 unix 2 [ ACC ] STREAM LISTENING 408230 /tmp/ssh-ofUeNNEwAqtP/agent.22 243 unix 2 [ ACC ] STREAM LISTENING 416227 /tmp/mongodb-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 /run/udev/control unix 7 [ ] DGRAM 5286 /dev/log unix 2 [ ACC ] STREAM LISTENING 5318 /var/run/acpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 /tmp//tmux-1000/default unix 2 [ ACC ] STREAM LISTENING 414450 /var/run/dbus/system_bus_socke And here is the log when trying to run on port 80 with node.js: [lucas@ecoinstance]~/node/nodetest1$ npm start > [email protected] start /home/lucas/node/nodetest1 > node ./bin/www events.js:72 throw er; // Unhandled 'error' event ^ Error: listen EACCES at errnoException (net.js:904:11) at Server._listen2 (net.js:1023:19) at listen (net.js:1064:10) at Server.listen (net.js:1138:5) at Function.app.listen (/home/lucas/node/nodetest1/node_modules/express/lib/applicati on.js:532:24) at Object.<anonymous> (/home/lucas/node/nodetest1/bin/www:7:18) at Module._compile (module.js:456:26) at Object.Module._extensions..js (module.js:474:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) npm ERR! [email protected] start: `node ./bin/www` npm ERR! Exit status 8 npm ERR! npm ERR! Failed at the [email protected] start script. npm ERR! This is most likely a problem with the nodetest1 package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./bin/www npm ERR! You can get their info via: npm ERR! npm owner ls nodetest1 npm ERR! There is likely additional logging output above. npm ERR! System Linux 3.13-0.bpo.1-amd64 npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "start" npm ERR! cwd /home/lucas/node/nodetest1 npm ERR! node -v v0.10.28 npm ERR! npm -v 1.4.9 npm ERR! code ELIFECYCLE npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/lucas/node/nodetest1/npm-debug.log npm ERR! not ok code 0 And sudo netstat -lnp does not return any matching port 80's: [lucas@ecoinstance]~/node/nodetest1$ sudo netstat -lnp [48/648] Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Progr am name tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 29160/mon god tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1976/sshd tcp6 0 0 :::22 :::* LISTEN 1976/sshd udp 0 0 0.0.0.0:49948 0.0.0.0:* 1604/dhcl ient udp 0 0 0.0.0.0:68 0.0.0.0:* 1604/dhcl ient udp 0 0 10.240.241.116:123 0.0.0.0:* 2076/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 2076/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 2076/ntpd udp6 0 0 :::12151 :::* 1604/dhcl ient udp6 0 0 :::123 :::* 2076/ntpd Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ACC ] STREAM LISTENING 405680 22814/ssh-agent /tmp/ssh-K dkxJfFLpKTC/agent.22813 unix 2 [ ACC ] STREAM LISTENING 408230 24049/ssh-agent /tmp/ssh-o fUeNNEwAqtP/agent.22243 unix 2 [ ACC ] STREAM LISTENING 416227 29160/mongod /tmp/mongo db-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 284/udevd /run/udev/ control unix 2 [ ACC ] STREAM LISTENING 5318 1798/acpid /var/run/a cpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 5177/tmux /tmp//tmux -1000/default unix 2 [ ACC ] STREAM LISTENING 414450 28213/dbus-daemon /var/run/d bus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 404225 22324/1 /tmp/ssh-9 TlDmu4bjl/agent.22324

    Read the article

  • Socks5 proxy "Dante" leaves many child processes stuck in FIN_WAIT2 / CLOSE_WAIT state

    - by Asad R.
    I'm running dante v1.2.1 as a SOCKS proxy server. The proxy works fine but at the end of the day there are around 40-50 or more child processes of sockd running even though there are no active connections. lsof shows that the child processes all have sockets in the CLOSE_WAIT and FIN_WAIT2 state. These child processes stay in this state unless I manually killall/restart the daemon. I'm running Gentoo Linux on a 2.6.24-23-xen kernel. I recently upgraded from dante v1.1.19-r4 which was giving me the exact same problem. Is this a configuration issue with Dante, my system, or is it a coding issue in the dante code?

    Read the article

  • unable to re-attach screen session on freebsd

    - by Michael
    I have a screen session that I am unable to re-attach to. I have tried kill -CHLD 6859, with zero success. Is there anything else that I can try to get this session re-attached q4# screen -ls No Sockets found in /tmp/screens/S-root. q4# ls -la /tmp/screens/S-root/ total 8 drwx------ 2 root wheel 512 May 26 12:52 . drwxr-xr-x 4 root wheel 512 Feb 26 2013 .. prwx------ 1 root wheel 0 May 26 10:14 6859.pts-0.q4 q4# ps uax 6859 USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND root 6859 0.0 1.2 84732 50444 ?? Ss 2Jan13 34:06.71 screen -h 9999 q4# screen -r There is no screen to be resumed. q4# whoami root q4#

    Read the article

  • How to enabled pdo mysql in Centos 5.8

    - by nacho3d
    I have a VPS with Centos 5.8 In phpinfo displays: './configure' '--disable-fileinfo' '--disable-pdo' '--enable-bcmath' '--enable-calendar' '--enable-ftp' '--enable-libxml' '--enable-magic-quotes' '--enable-sockets' '--prefix=/usr/local' '--with-apxs2=/usr/local/apache/bin/apxs' '--with-curl=/opt/curlssl/' '--with-imap=/opt/php_with_imap_client/' '--with-imap-ssl=/usr' '--with-kerberos' '--with-libdir=lib64' '--with-libxml-dir=/opt/xml2/' '--with-mysql=/usr' '--with-mysql-sock=/var/lib/mysql/mysql.sock' '--with-openssl=/usr' '--with-openssl-dir=/usr' '--with-pcre-regex=/opt/pcre' '--with-pic' '--with-zlib' '--with-zlib-dir=/usr' I've tried this: http://www.host1free.com/forum/vps-technical-support/7248-tutoria-centos-apache-webserver-mysql-php-eaccelerator-apc.html And aparently it installed php-pdo # rpm -qa |grep php php-5.3.13-1.el5.remi php-xml-5.3.13-1.el5.remi php-common-5.3.13-1.el5.remi php-cli-5.3.13-1.el5.remi php-pdo-5.3.13-1.el5.remi php-xmlrpc-5.3.13-1.el5.remi php-mcrypt-5.3.13-1.el5.remi But I've restarted apache and it still says in my phpinfo: '--disable-pdo' Should I rebuild php? Do I need to do some other step?

    Read the article

  • Httpd restart "Address already in use" error

    - by mtndesign
    I have an .rpm, which I created. In its %post part, I do some stuff, and in the end of this script, i call service httpd restart. It gives the following error: + service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:81 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:81 no listening sockets available, shutting down Unable to open logs [FAILED] I got this from the rpm verbose installing (-vv). So I know its about httpd restart itself, nothing else. The according to netstat only one process (httpd) is listening on port 81. $ sudo netstat -nlp | grep 81 tcp 0 0 :::81 :::* LISTEN 29670/httpd I don't understand, why running http FAILS at stop, and FAILS again in start. Any ideas how to solve this?

    Read the article

  • apache2 installation conflicts with previous lampp content

    - by Fruit
    hej, i downloaded xampp-linux-1.7.3a.tar.gz and installed it manually, not with aptitude. That was a mistake as proved later, due to some configurational issues i decided to remove it and install it via aptitude install apache2. Now the previous lampp conflicts with the new apache2, i get this error message. Starting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down how can delete the existing lampp files entirely or how can i configure apache2 to work as intended ? any help will be appreciated

    Read the article

  • How to clear stuck locked maildrop pop3 process

    - by Joshua
    I am using cyrus for imap and pop One of my users is getting the following error: Unable to lock maildrop : Mailbox is locked by POP server. I can see where it starts in the log. I've read that there is no physical lock file anymore (i've tried looking for it anyways) and that the solution is to just wait for the timeout, or kill the offending pop3 process. I know that this is happening because of a lossy connection on the part of the affected user, and that pop3 can only have 1 session active at a time. I need to manually clear the lock and I am having trouble finding the offending pop process. I have tried lsof, but it doesn't say how long the individual files (sockets) have been opened for. I've reduced the tcp keepalive time down to 5 mins, but I still need to reset this guy's lock. I could use some pointers. Thanks!

    Read the article

  • apache is up but does not read requests

    - by bosh
    This usually happens a few minutes after restarting apache: httpd daemons are up, but are not reading the requests from the sockets. The web clients just wait forever on the connection. When I run netstat, the Recv-Qs are showing a positive byte count which does not change. So basically the connection between the client and apache is in the CONNECTED state but no progress is made. Restarting apache solves the problem for a couple of minutes, but then it's deja vu all over again. Other servers (sshd, ftpd, etc) are fine. Where should I look further? Any clue? Thanks!

    Read the article

  • confusion in attaching detaching screen on Ubuntu

    - by Registered User
    Hi, screen -list shows There are screens on: 9531.pts-0.ubuntu (03/02/2011 12:43:34 PM) (Detached) 2101.pts-0.ubuntu (03/02/2011 12:39:17 PM) (Attached) 2219.pts-0.ubuntu (03/02/2011 11:20:56 AM) (Attached) 3 Sockets in /var/run/screen/S-bond. but when I type screen -r 2101.pts-0.ubuntu There is a screen on: 2101.pts-0.ubuntu (03/02/2011 12:39:16 PM) (Attached) There is no screen to be resumed matching 2101.pts-0.ubuntu. Here I can not get back the the screen 2101.pts-0.ubuntu and infact I get exited. Where as if I do screen -r 9531.pts-0.ubuntu [detached from 9531.pts-0.ubuntu] then above you can see I went inside that session and came out and I can do it again and again.But with other sessions same is not the case? SO what mistake am I doing?

    Read the article

  • why dstat failed with --tcp option?

    - by hugemeow
    why --tcp option failed? should i install some package? if yes, which package i should install? this question is not the same as http://stackoverflow.com/questions/10475991/tcp-sockets-double-messages dstat --tcp Module tcp has problems. (Cannot open file /proc/net/tcp6.) None of the stats you selected are available. what is the problem with module tcp, how to find the problem? what i should do in order to fix this issue?

    Read the article

  • why my server has a dir named "?"

    - by liuxingruo
    These are all the dirs in my server: ? bin boot dev etc home lib lost+found media media2 misc mnt net opt proc root sbin selinux srv sys tmp usr var why there is a "?" dir? Thanks very much. BTW: the touch command was found on my server(wiered). I list the bin dir: alsacard cp dd env hostname loadkeys more ps sed tcptraceroute alsaunmute cpio df ex igawk loadkeys.static mount pwd setfont traceroute6 arch csh dmesg false ipcalc logger mountpoint raw setserial tracert awk cut dnsdomainname fgrep kbd_mode login mv red sh view basename date doexec gawk keyctl ls netstat redhat_lsb_init sleep ypdomainname bash dbus-cleanup-sockets domainname gettext kill mail nice rm sort cat dbus-daemon dumpkeys grep ksh mailx nisdomainname rmdir stty chgrp dbus-monitor echo gtar ksh93 mkdir pgawk rpm su chmod dbus-send ed gunzip link mknod ping rvi sync chown dbus-uuidgen egrep gzip ln mktemp ping6 rview tar touch is missing, how can i get it back?

    Read the article

  • After logging out of SSH, screen sessions disappear on Arch Linux

    - by Ivan
    On Arch Linux (I'm on a single dedicated server, where my domain name points to only one IP), when I SSH into a user (say, for example, user mc), and then do screen -S test (or -dmS, the resulting issue is the same), run a command, and then detach from it, then exit out of my SSH session, and log back in, the screen session disappears. screen -ls returns No Sockets found in /run/screens/S-mc. The only way I can reattach to my sessions is if I never logged out of my SSH. How do I fix this? I do have read/write access in /run/screens/S-mc I detach from screen sessions with Ctrl-A,D disown -a && exit gives me the same problem shopt huponexit returns "huponexit off" There is no ~/.logout, and ~/.bash_logout is empty, with 3 lines of comments, telling me it's the ~/.bash_logout file ls -l /usr/bin | grep screen returns lrwxrwxrwx 1 root root 12 Oct 31 2012 screen -> screen-4.0.3 -rwsr-xr-x 1 root root 363672 Oct 31 2012 screen-4.0.3

    Read the article

  • Unix domain socket firewall

    - by lagab
    Hello, everyone. I've got a problem with my debian server. Probably there is some vulnerable script at my web-serser, which is running from www-data user. I also have samba with winbind installed, and samba is joined to windows domain. So, probably this vulnerable script allows hacker to bruteforce out domain controller through winbind unix domain socket. Actually I have lots of such lines at netstat -a output: unix 3 [ ] STREAM CONNECTED 509027 /var/run/samba/winbindd_privileged/pipe And our DC logs contain lots of recorded authentication attems from root or guest accounts. How can I restrict my apaches access to winbind? I had an idea to use some kind of firewall for IPC sockets. Is it possible?

    Read the article

  • How to use my computer to control a lamp?

    - by nona urbiz
    I've been researching computer automation systems, but everything I've found has been overkill for what I'm interested in. Can anyone help me control a lamp that is on my desk, plugged in the wall beneath the desk, with my computer (also on the desk, usually). What got me thinking is that I have the lamp plugged into a Belkin extension cord/surge protector that came with a wireless switch that toggles the power going to 6 of the eight sockets. Can I somehow hook my computer into this? I'm not too afraid to get into some wiring type thing, but do have a somewhat limited budget. It'd also be cool to get a dimmer in the loop too. thanks aha. after more research, i have realized what i'm looking for is instructions for a DIY version of this that won't look so ugly, and that i can build a UI for rather than shortcuts.

    Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >