Search Results

Search found 16987 results on 680 pages for 'second'.

Page 452/680 | < Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >

• Intel Rapid Storage Technology (pre-OS) driver installation

  - by Nero theZero

  My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

  Read the article

• Two instances of Windows Vista on boot up after failed clean install

  - by Dwayne

  I tried to install a clean version of Vista but failed. I ended up with Windows and Windows.old on my C: drive and a dual boot option on boot up. I gave up and booted up the old version and tried to rename the Windows.old to Windows and was asked if I wanted to merge the two folders. I answered yes and all seemed OK until I booted up this morning and was given the choice of two versions of Vista. The first one is the one that failed to installed correctly and the second one is the old version. How can I get rid of the failed installation? I got rid of the bad boot via MSCONFIG. Here is my current situation: several hard drives installed Using C: as my boot drive a much larger drive (H:) for storing most of my files. I found a subfolder in my C:\windows folder named windows. Upon inspection I determined it to be older than the C:\windows folder and therefore it must be the older, working version of the boot. I renamed the C:\windows folder to c:\windows.bad and moved the sub windows to the C: root directory. I also copied it to the h: drive. Now MSCONFIG reports that the copy that is booting is the h: copy. How can I change it back to the C:\ copy and can I delete the C:\windows.bad file set?

  Read the article

• How can I fix Office Sharepoint Search service?

  - by unknown (yahoo)

  For some reason, in operations server services, Office Sharepoint Search Service is MISSING! Which means I cant get Shared services working, which in turn I cannot get, and I do not think I have ever got Usage and reporting to see who is visiting my website, counter and with what OS/ browser ETC. I dont think I have ever seen this work in the 2 years trying with sharepoint. So in essense I have two problems, most important SEARCH, second usage reports. When trying to search, all i get is unknown error. Nothing is in my event viewer at all. I have tried http://www.cjvandyk.com/blog/Lists/Posts/Post.aspx?ID=96 , in the comments on that site, on other person reports search is missing entirely and is going to uninstall. Im tired of uninstall sharepoint and resinstalling to fix an odd off issue. I have things setup with Team foundation server that took forever to get work and reinstallation is not my solution. As for usage reporting, this is what microsoft responds to the " Both Windows SharePoint Services Usage logging and Office SharePoint Usage Processing must be enabled to view usage reports. Please contact your administrator to ensure that these services are enabled. " error I cannot do all the steps since SSP needs to be setup which i cant above.

  Read the article

• Create a special folder within an outlook PST file

  - by Tony Dallimore

  Original question I have two problems caused by missing special folders. I added a second email address for which Outlook created a new PST file with an Inbox to which emails are successfully imported. But there is no Deleted Items folder. If I attempt to delete an unwanted email it is struck out. If move an email to a different PST file it is copied. I created a new PST file using Data File Management. This PST file has no Drafts folder. This is not important but I fail to see why I cannot have Drafts folder if I want. Any suggestions for solving these problems, particularly the first, gratefully received. Update Thanks to Ramhound and Dave Rook for their helpful responses to my original question. I assumed the problem of not have a Drafts folder in an Archive PST file and not having a Deleted Items folder associated with an Inbox were part of the same problem or I would not have mentioned the Drafts folder issue since I have an easy work-around. Perhaps my question should have been: How to I load emails from an IMAP account and be able to delete the spam?

  Read the article

• Windows 2012 Server: Enable .NET 3.5

  - by Meengla

  I have a Windows 2012 Server which needs .NET 3.5 installed. For background info/solutions, please see this: http://sqlblog.com/blogs/sergio_govoni/archive/2013/07/13/how-to-install-netfx3-on-windows-server-2012-required-by-sql-server-2012.aspx I have tried this but it doesn't work for me. Here is what I am trying: Using a Windows 2012 ISO file, 'mount' on the 2012 Server as 'D' drive and then tried both GUI and Command prompt. In case of GUI, I specified the 'alternate source' path to the D drive's 'source/sxs folder but that failed without giving enough info. In case of the command prompt, here is what's happening: dism /online /enable-feature /featurename:NetFx3 /source:d:\sources\sxs I get error: Installed but Parent feature not enabled. So I tried another approached: dism /online /enable-feature /featurename:NetFx3 /all /source:d:\sources\sxs the above command, per http://blogs.technet.com/b/askcore/archive/2012/05/14/windows-8-and-net-framework-3-5.aspx is supposed to enable parent elements; but running this I get error like 'source not found'. Is there some error in my second command? What else I could do? This is Windows 2012 Server Standard edition. Thanks!

  Read the article

• Weird connectivity issue wtih USB Wifi stick.

  - by Carlos Nunez

  Hi, all! I'm not sure if this is the appropriate place to throw this question out there, but I'll give it a shot. I'm setting up two PCs, and I've been having massive troubles getting a USB wireless dongle working. I have two Sony VAIOs (Windows XP, SP2) that I found second-hand, and since they will be in a location too far to connect by Ethernet (no, can't do patch panels here :p), I need to connect them by wireless. Easiest and cheapest way to do that at the moment is by using two USB wireless sticks that I've had for a while, but never used. One of the computers is using a SMC-manufactured card, whereas the other is using a Belkin F5D7050. The box with the SMC card can see and authenticate with my router just fine, and has no problem obtaining a DHCP lease. The box with the Belkin, on the other hand, isn't so lucky. While it can see my router and associate with it, it will not obtain a DHCP-issued address. Worse, when I assign a static IP address to the NIC, it can ping the entire network and access the internet (meaning it can authenticate with the router), but no computer can ping to it UNLESS that computer pinged the computer that's pinging it first. Confused? Well, so am I. Has anyone had this issue before? Is this just a sign of a bad card? (For the moment, I have it connected by Ethernet, as I haven't moved it yet. However, this will be a problem when I set it up in its new home later.) Thanks! -Carlos Nunez

  Read the article

• Disaster After Removing Two HDD From LaCie RAID 0 Case

  - by John

  This is the second time this has happened. I own a LaCie IDE RAID 0 Enclosure and the RAID went bad. The system gave me a warning that the data could be read from the RAID but that nothing could be written, and to remove the data ASAP. I did that and erased and reinitialized the RAID. System reported it was fine, no issues. I wrote to the RAID again and the system reported the same issue. So, I removed the drives and tested them individually thinking one must have gone bad. Sure enough, one HDD reported all bad blocks, every single one after the Master Boot Record. I didn't think much about it because of the age of the drives, 5 years old. So, I bought two new drives plugged them in and started up the RAID again. Exactly the same thing happened. All was fine after initializing the RAID and then the next day after powering on the RAID the exact same issue. The HDD sitting in the same position as the first "bad" HDD reported all bad blocks. Obviously, this is an issue with LaCie's bridge board not with the drives. No utility I have used has been able to bring this HDD back to life. I thought I would just copy the MBR from the good drive to the new one using a sector editor but am hesitant. Is it possible the firmware on the HDD has been corrupted by the LaCie bridge board?? What else could be the cause of such an issue? How can I fix this drive?

  Read the article

• Macbook Pro Triple Boot OS X Lion, Windows 7 and Windows 8

  - by Lloyd Sparkes

  MacBook Pro (Summer 2010 Model, Basic Model) I currently have OS X Lion and Windows 7 running side by side on my MacBook Pro. However I have a need to get Windows 8 running as well in this mix (a Virtual Machine is not good enough, I need the performance). I have created a suitably sized parition (80GB) that is recognizable in Boot Camp. However every time I try to boot from the USB stick (that worked to install Windows 8 on my PC) using the latest version of rEFIt, it just boots Windows 7 and not the Windows 8 installer. I cannot start the installation within Windows 7 as it will just install over Windows 7. I'm guessing the Boot Camp emulation is doing something werid to stop the "Press any key to install Windows..." message from appearing (which should happen if the installer detects Windows is already installed (e.g. if you left your install disk in). Is there a way to get around this / force the installer to start? (Note I cannot start the Windows 7 installer either if I wanted to install a second copy of Windows 7 to upgrade to Windows 8)

  Read the article

• PHP scripts randomly becoming really slow to respond - Database lockup?

  - by webnoob

  Hi All, I wasn't sure whether to post this here or on stackoverflow, so apologies if its in the wrong place. I have about 7 php scripts running on a centOS VPS. Each of these scripts contacts a game server and processes the logs, with the logs it either does some database queries or sends info back to the game server. I am having an issue where some of the scripts will randomly become REALLY slow to respond and I don't know where to start with my debugging. Each script connects to its own database schema but on the same MySQL server. Each script will do about 4 inserts per second and twice as many select statements on their respective databases. I thought a database lockup may cause the issue but some console messages that are read from the database are sent to the game servers console without issue every 30 seconds, even when the script is slow to responding to other commands. Non of the scripts are using a lot of memory or CPU power. About 0.1% each. I know this information is really vague but I don't know linux very well at all (in fact, top is about my limit) and I really don't know where to start debugging this. Thanks.

  Read the article

• Windows 2008 Standard upgrade to Windows 2008 Enterprise failure

  - by Archit Baweja

  Sidestory, I was in the process of setting up a second Exchange 2010 server for DAG support, when I realized that my box needed Windows 2008 Enterprise edition. The box currently has Windows 2008 Standard Windows update including SP2 Exchange 2010 with CAS, HT, Mailbox roles Domain Services role File Services role. When I try to upgrade to Windows 2008 Enterprise, I initially got a "your current version of windows is more recent than the intallation media", something to that effect. My first guess was it may be SP2 related, so I uninstalled SP2, restarted and tried again. This time it gave me an error to the effect Windows could not configure one or more windows components. Please restart and try the update again. This was at the last stage of the Windows 2008 Enterprise install when it says "Completing installation". So I removed Domain Services role (including demoting it as a DC). However I get the same error again. Anyone see something like this before and have any suggestions? Also , is there a log file the windows upgrade program spits out that I can consult to see what component exactly is interfering? Update 1 Based on some googling I finally found the setup log file, and it seems that Windows setup had an issue determining the .Net 3.0 "feature" being installed or uninstalled. So based of of a win7/vista technet article I'm going to retry the upgrade after removing the .Net 3.0 feature.

  Read the article

• iBook G4 has black screen on boot

  - by Jonathan Patt

  I have an old iBook G4 (A1054, 1.2 GHz) which has issues when it loses power or is shut off. If the battery drains—which happens quickly, as its remaining capacity is very low—it enters some sort of weird mode where it's not really awake (the screen is black, can't do anything) but it has no pulsing light indicating it's asleep either. The only way to exit this mode is to hold down the power button for ten seconds until it shuts off, and attempt rebooting it. Almost always, however, it makes the sound of the optical drive starting up, and then doesn't continue past that point. The screen doesn't come on, and things like resetting PRAM don't work. Occasionally a fan comes on loudly for a second or two. This sometimes seems to correspond with my pressing down on the rear-right casing, above the power jack. In the past, shutting it off, disconnecting it from power, removing the battery and waiting for 30 minutes would do the trick, but this time I have done that several times, letting it sit for up to several hours before retrying, to no avail. Any ideas?

  Read the article

• Does a Windows 7 dvd only have one language?

  - by user326639

  I'm a Dutch developer living in Spain. I recently composed a new computer from new parts and I installed Windows 7 Professional 64 bit (OEM) on it. On the web site of the on-line shop there was a note saying "language: Spanish". Because my English is quite a bit better than my Spanish, but mainly because it is much easier to find information on the web in English, I want my OS to be in English. I asked the on-line shop if they also sold the UK version of Windows 7 but they assured me that "all Windows 7 versions are multi-language". With the installation of XP a few years ago, I remember that I was offered the option English or Spanish while the installation process was still in the DOS-like (non-graphical) screen. While installing Windows 7, I did not see any non-graphical screen and the first time I was asked about the language, was in a drop-down list that contained only Spanish. I know about the language pack possibility of Windows 7, but this is not available on Professional. Even if I had Ultimate, I don't know if it would be possible to install Windows in Spanish, and then add English as a second language from a language pack. I get the impression that English has to be the base-language. Furthermore, I am a bit sceptical until I'd see it in action. What happens with shortcuts (i.e. Select All: ctrl-a in English / ctrl-e in Spanish, and what about logging messages in Event Viewer, etc) So can anybody tell me how it works with languages in Windows 7? Have I been misinformed by the computer shop? Could it be that OEM versions of Windows are single language an a full installation is not?

  Read the article

• two computers on same network cannot ping eachother nor view NetBios resources

  - by slava

  I'd like to find out the problem of my network configuration I have network configuration is like in this diagram: The problem is between laptop1 and laptop2. At first I thought it was samba server problem. I was configuring samba server on one of the laptops and I wasn't able to access the shares from the second laptop no matter what I was doing. After installing/removing/configuring samba-server a couple of times I realized that the problem resides somewhere else. Laptop configurations: - Laptop1: ubuntu 12.04 - Laptop2: Windows 7/ ubuntu 12.04 ( dual boot ) - Server : ubuntu 12.04 When I do "ping 192.168.0.10" from laptop2, I get "Destination host unreachable". The same situation is when I ping in other direction. When I access Laptop1 shares from Laptop2, having windows 7 loaded, I get the error message: "Error code: 0x80070035 The network path was not found." When I ping "server" or "router" or "wifi router" from any of laptops I get a reply. The same with windows shares, I am able to access "server"s shares from Windows and Ubuntu, from any of my laptops. Netbios can't function correctly, that's obvious, I am unable to access windows shares between laptops. I assume that on "wifi router" is a miss-configuration, but I can't find what specifically. The "Wifi router" works as Hub + wifi, it is connected to "router" not in WAN port but in LAN1. Please, help me correctly configure the router to make them see each-other, or at least make NetBios work correctly, between laptops, to be able to access windows shares. Thanks!

  Read the article

• samba4 dc "network location cannot be reached"

  - by mitchell babies peters

  to clear the air centos 6.4? (maybe 6.3) as the server, running samba 4.0.10, trying to add a windows 7 client that has connectivity to the server. this is what windows shouts as me as it mocks my dependence on network infrastructure. "the network location cannot be reached." i have access to the domain contoller (dc) im using the dc as the domain name server (dns) already, and the name is correctly resolving, and it is correctly forwarding outbound traffic. i have nothing but self taught experience with active directory(ad) so if i am missing something obvious, please shout it out, but keep the verbal abuse to a minimum. i checked samba4DC + my error and found nothing relevant to my issue, if i missed something please point me in that direction. the weekend is just starting as i write this so i probably wont be back on to check this post for a day or three, but i might because this mystery is killing me. i followed the samba4 as a dc guide here and i supplimented gaps with this i have tested kerberos, ntp, and set my DC as the clock to sync to in my windows client and it appears to be a very small fraction of a second off so that shouldn't be it. also, firewall and selinux are both off for testing. i have also tried disabling ipv6, and cleared the registry of ipv6 records (allegedly the default samba4 as a DC runs as windows server 2003 which allegedly does not support or tolerate the existence of ipv6, fair warning, i heard this on the internet so it is probably a lie) i have tried a few other things that i have forgotten because i have been doing this for a day and a half now. ideas welcome. suggestions for alternatives are also welcome, as long as they are free. i was given a budget of $0 dollars and told to implement active directory (no prior knowledge of active directory at that point).

  Read the article

• OS X Client & Ubuntu Server - Best way for client to access files on server?

  - by Camsoft

  I've got a local development web server running Ubuntu. I also have an iMac running OS X 10.6 which I use a client and is my development machine. I'm currently have Samba server installed on my Ubuntu server. I have shares setup for all the website directories. I then use my Mac and Coda to edit the files via their shares. This generally works really well but I noticed that my Mac was writing loads of resource fork ._filename files everywhere. I found out the following about the files: These files are created on volumes that don't natively support full HFS file characteristics (e.g. ufs volumes, Windows fileshares, etc). When a Mac file is copied to such a volume, its data fork is stored under the file's regular name, and the additional HFS information (resource fork, type & creator codes, etc) is stored in a second file (in AppleDouble format), with a name that starts with "._". (These files are, of course, invisible as far as OS-X is concerned, but not to other OS's; this can sometimes be annoying...) Does anyone know of a way of sharing files between a Mac client and a Linux server that is most compantable between the two operation systems? Ideally it needs to support the HFS filesystem so that the resource forks are not created and it also needs to support the permissions between server and client.

  Read the article

• WRTU54G-TM router with 3rd party firmware; Can custom firmware include stock binary portions?

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly? Update I have found someone working on 3rd party WRTU54G-TM firmware. I am still interested in my second part of the questions, that is can't the stock firmware images be pulled apart and have the close-source, if any, binary kernel modules moved into another more flexible custom firmware?

  Read the article

• bind9 dlz/mysql at ubuntu segfault libmysqlclient.so

  - by Theos

  I have a big problem. I installed the bind9 nameserver to three different computer. two Ubuntu 10.04.4 LTS, and one Ubuntu 11.10 I compiled it 9.7.0, 9.7.3, 9.9.0 with this method: ./configure --prefix=/usr --sysconfdir=/etc/bind --localstatedir=/var \ --mandir=/usr/share/man --infodir=/usr/share/info \ --enable-threads --enable-largefile --with-libtool --enable-shared --enable-static \ --with-openssl=/usr --with-gssapi=/usr --with-gnu-ld \ --with-dlz-mysql=yes --with-dlz-bdb=no \ --with-dlz-filesystem=yes --with-geoip=/usr make make install After the set up for dlz/mysql, the BIND server is working perfetctly until 5-30 minute long. Ahter i got segfault. I resolve temporaly the problem with a simple process watchdog, and if the named is stopped, the watchdog is restart it, but this is not a good idea in long therm. My log output is: messages: Apr 13 19:33:51 dnsvm kernel: [ 8.088696] eth0: link up Apr 13 19:33:58 WATCHDOG: named not running. Restarting Apr 13 19:35:08 dnsvm kernel: [ 87.082572] named[1027]: segfault at 88 ip b71c4291 sp b5adfe30 error 4 in libmysqlclient.so.16.0.0[b714e000+1aa000] Apr 13 19:35:08 WATCHDOG: named not running. Restarting Apr 13 19:35:08 dnsvm kernel: [ 87.457510] named[1423]: segfault at 68 ip b71d6122 sp b52f0a40 error 4 in libmysqlclient.so.16.0.0[b7160000+1aa000] Apr 13 19:35:09 WATCHDOG: named not running. Restarting Apr 13 19:41:56 dnsvm kernel: [ 494.838206] named[1448]: segfault at 88 ip b731c291 sp b5436e30 error 4 in libmysqlclient.so.16.0.0[b72a6000+1aa000] Apr 13 19:41:57 WATCHDOG: named not running. Restarting Apr 13 19:57:26 dnsvm kernel: [ 1424.023409] named[2976]: segfault at 88 ip b72d1291 sp b6beee30 error 4 in libmysqlclient.so.16.0.0[b725b000+1aa000] Apr 13 19:57:26 WATCHDOG: named not running. Restarting Apr 13 20:11:56 dnsvm kernel: [ 2294.324663] named[6441]: segfault at 88 ip b7357291 sp b6473e30 error 4 in libmysqlclient.so.16.0.0[b72e1000+1aa000] Apr 13 20:11:57 WATCHDOG: named not running. Restarting syslog: http://pastebin.com/hjUyt8gN the first server is a native, normal x64 server (u1004lts), the second is virtualised server (u11.10) the third is also virtualised (10.04lts) This servers is only for dns providing with mysql server db. But the problem is be with all server, and all bind version. named.conf: http://pastebin.com/zwm1yP7V Can anybody help me, or any good idea?

  Read the article

• Computer turns off unexpectedly

  - by Shahar

  My computer turns itself off unexpectedly after some time of use. It appears that this might be temperature related, but not for sure. I installed 2 tools that monitor temperature: SpeedFan and CPU Thermometer. The only definite finding is that there is a sensor (labelled temp1 in SpeedFan and CPU in CPU thermometer), which shows a temperature of 108C a second before the computer powers down. Until that moment, this sensor shows a constant temperature of 40C. I can usually reproduce the shutdown by viewing a few movies together, which cause another sensor (labelled CPU in SpeedFan) to go up to 60sC, but I do experience the problem even at times when this sensor remains low and cool. It does seem that the problem is more frequent if the computer is turned back on immediately after shutdown, but not always. I have had other hardware problems recently, which might be related: My hard disk heated up. I installed a fan on it, which worked to reduce the heat. The hard disk sensor shows around 40C. I had occasional blue screens and hard disk failures. Replacing the power supply seems to solve both these issues, but then this powerdown problem began appearing. I would appreciate any suggestions as to how to determine where the fault is, or what needs to be replaced.

  Read the article

• Virtual (ESXi4) Win 2k8 R2 server hangs when adding role(s)

  - by Holocryptic

  I'm trying to provision a 2k8r2 Enterprise server in ESXi4. The OS installation goes fine, VMware tools, adding to domain, updates. All the basic stuff before you start adding Roles and Features. I've had this happen on two attempts already, and I'm not sure where the problem might be. I don't think it's hardware, because I have another 2k8r2 Standard server that's running fine. The only real difference is the install media. The server that's working was installed using a trial ISO and license. The one I'm having problems with is a full MAK installation. When I go to add a Role (the last case was Application Server) it gets all the way to "collecting installation results" before it hangs. CPU utilization in the vSphere client shows little spikes of activity with flatlines inbetween, but the whole console is locked up. The only way to release it is to power off and bring it back up. When you go to look at the added roles after bringing it back up, it shows that it is installed, but I don't trust that something didn't get wedged in all of that. The first install I did was with Thin Disk provisioning. The second attempt was with regular disk provisioning. In both cases 4GB of RAM, 2 vCPUs. VMware host is a HP Proliant DL380 G6, RAID-1 OS, RAID-5 data volume. 12 GB RAM. Has anyone else had this problem, or know where I should start poking around?

  Read the article

• HP Procurve 2610 intervlan routing

  - by user19039

  Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all unmanaged switches attached to the core. We have a second 2610 on port 28 Running configuration: ; J9085A Configuration Editor; Created on release #R.11.25 hostname "Core_HP" interface 22 speed-duplex 100-full exit ip routing snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 1-12,17-22,26-27 ip address 192.168.4.6 255.255.255.0 tagged 25 no untagged 13-16,23-24,28 exit vlan 2 name "WAN" untagged 28 ip address 10.254.254.3 255.255.255.0 exit vlan 3 name "Wireless" untagged 13-16,24 ip address 192.168.7.6 255.255.255.0 ip helper-address 192.168.4.2 tagged 27 exit vlan 35 name "guest" untagged 23 tagged 24 exit vlan 4 name "esxi" untagged 25 ip address 10.10.1.1 255.255.248.0 exit ip route 192.168.5.0 255.255.255.0 10.254.254.1 ip route 192.168.6.0 255.255.255.0 10.254.254.1 ip route 0.0.0.0 0.0.0.0 192.168.4.10 show ip route IP Route Entries Destination Gateway VLAN Type Sub-Type M etric Dist. ------------------ --------------- ---- --------- ---------- - --------- ----- 0.0.0.0/0 192.168.4.10 1 static 1 1 10.10.0.0/21 esxi 4 connected 0 0 10.254.254.0/24 WAN 2 connected 0 0 127.0.0.0/8 reject static 0 250 127.0.0.1/32 lo0 connected 0 0 192.168.4.0/24 DEFAULT_VLAN 1 connected 0 0 192.168.5.0/24 10.254.254.1 2 static 1 1 192.168.6.0/24 10.254.254.1 2 static 1 1 192.168.7.0/24 Wireless 3 connected 0 0 show ip Internet (IP) Service IP Routing : Enabled Default TTL : 64 Arp Age : 20 VLAN | IP Config IP Address Subnet Mask Prox y ARP ------------ + ---------- --------------- --------------- ---- ----- DEFAULT_VLAN | Manual 192.168.4.6 255.255.255.0 No WAN | Manual 10.254.254.3 255.255.255.0 No Wireless | Manual 192.168.7.6 255.255.255.0 No esxi | Manual 10.10.1.1 255.255.248.0 No guest | Disabled

  Read the article

• NATing IPv4 while routing IPv6

  - by Hugo

  I've the following setup: client(s) <---> (eth0) router (eth1) <---> wan I have a static IPv4 address and a /48 IPv6 address block. I need to connect all the clients to (wan). Each client will have it's own public IPv6. Meanwhile, I need to NAT those same clients over to (wan). Everything IPv4-related and the NAT are working fine. The IPv6 communication to/from (eth0)<-(clients) works fine, as does the IPv6 communication from (eth1)<-(wan) works fine. To provide IPv6 to all my clients, I've thought of too choices: Having the router as a gateway, which different IP on each interface. This sounds like I need to tell my ISP to route the entire block through that single IP, so it's not really an option. Transparently pass IPv6 packets to/from eth0<-eth1, so all clients can communicate with the upstream gateway (I would actually have a switch here if it weren't for the need to remain IPv4 compatible). So, since I've opted for the second choice, I'm in doubt: How can I pass all IPv6 traffic from eth0 to eth1 transparently? What I need is a level 3 bridge, but linux's bridgeutils create a level 2 bridge (which would bridge ipv4 as well, and I can't have that). This is a DD-WRT device, but it's pretty much an embeded linux, so most suggestions that would work on linux are welcome. Thanks.

  Read the article

• Problem importing pictures from a digital camera with Windows 7

  - by snark

  Hi, Since I'm using Windows 7 (Beta, then RC, now RTM), I have issues when I download pictures from my digital cameras. It happens with my 2 cameras: a Canon Powershot S2 IS and a Canon Ixus 80 IS. When I plug a camera (any of them) to a USB port and switch it on in Play mode, the Autoplay function of Windows 7 starts with this screen: I select "Import pictures and videos" to call the native Windows 7 tool. It searches a bit for pictures to download from the camera and starts the transfer. However, during the transfer, I often get errors like this one: If I use "Try again", it works fine the second time and the picture is retrieved correctly. It's very annoying when it happens 20 or 30 times in a 500-picture download. I cannot leave it running standalone, as I have to watch for the errors and click on "Try again". Any idea what is causing these errors? I tried changing the USB port (normally the cameras are connected via a USB hub but it happens also when I connect them directly to a MB USB port) and the USB cable, but no success. I also checked the SD card by connecting them with a card reader and running a ChkDsk on them but it found no errors on the cards. Update: No problem when I copy the pictures manually with the Windows Explorer. And no problem either when I access the card with a reader. The builtin import tool of Windows is convenient as it sorts the pictures automatically by date (1 folder per day). And this is the way I sort my pictures

  Read the article

• Setting up SSL for phpMyAdmin

  - by Ubuntu User

  I would like to run phpmyadmin using my SSL certificate. I read that if I placed the following within the file: /etc/phpmyadmin/config.inc.php, it would force it to use SSL. And now it does... $cfg['ForceSSL'] =true; However, my issue is when I did this, now I get an error stating "cannot connect to server." I do a port scan and my port 443 is closed for one, but I am connecting via https:// for my secure web based email admin panel. This tells me this may not be the issue. Second, is that I have a SSL certificate I purchased but I am not sure how to apply this cert. mydomain.com.crt is sitting on my desktop, how should I be utilizing this? I remember creating a self signed cert for my web-email access. Do I have to do this for phpmyadmin as well? At least this way, since I am the only one who will ever access the DB, it will never expire. Also the phpmyadmin used to come up as: http://mydomain/phpmyadmin/ of course I am now trying to get to https://mydomain.com/phpmyadmin/ however, I do not have any pages on my website that requires https:// currently. In the future I may add this. But for now, I only want to access phpmyadmin via ssl. I can use my own -- but if this causes problems with future ecommerce apps under mydomain.com I would rather use the SSL cert I already purchased. Thank you!

  Read the article

• Need troubleshooting advice for intermittent dns problems with requests on isp nameservers

  - by Mnebuerquo

  I've been having some intermittent dns problems with a web server, where certain isp's dns servers don't have my hostnames in cache and fail to look them up. At the same time, queries to opendns for those hostnames resolve correctly. It's intermittent, and it always works fine for me, so it's hard to identify the problem when someone reports connectivity problems to my site. My website is on a server running linux with Plesk. My dns records are configured with plesk (so my server is its own dns master). Domain name is registered with godaddy. I'm not real knowledgeable about dns, so I don't really know how to begin with troubleshooting. I've started learning to use dig, but while I can read the manpage to learn the syntax, I don't really know what questions to ask. Since the problem is intermittent I haven't been able to really catalog many symptoms. Symptoms I have observed: Certain people repeatedly reported intermittent problems connecting to my website. This was only from certain networks. (Ex: One guy could connect reliably from his office but not his home.) Sometimes I notice my browser taking a long time looking up the hostname for my site (Firefox shows a message in the status bar at the bottom). For me this is in the ten second range. ssh connections from anywhere to my server take a long time to connect but then seem to work fine once connected. So hopefully the folks on serverfault can point me to a good beginner tutorial for understanding dns, and suggest troubleshooting questions to ask next time one of my users reports connectivity problems.

  Read the article

• Sharing two SSL wildcard certificates in memory in nginx

  - by hvtilborg

  I have an nginx server running with two IP addresses, say 1.2.3.4 and 4.3.2.1. Besides there are two wildcard SSL certificates for *.example.net (i.e. wc1, pointing to 1.2.3.4) and *.sub.example.net (i.e. wc2, pointing to 4.3.2.1). The nginx docs mention that you can share a wildcard certificate between server instances like this: ssl_certificate wc1.crt; ssl_certificate_key wc1.key; server { listen 1.2.3.4:443; server_name www.example.net; ssl on; ... } server { listen 1.2.3.4:443; server_name test.example.net; ssl on; ... } However, I was wondering whether this same construct is possible to use with the second wildcard certificate too. Both domains have around 500 subdomains. Do they not get mixed up, since the ssl_certificate construct is now global?

  Read the article

< Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >