Search Results

Search found 25377 results on 1016 pages for 'development'.

Page 458/1016 | < Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >

  • 2-d lighting day/night cycle

    - by Richard
    Off the back of this post in which I asked two questions and received one answer, which I accepted as a valid answer. I have decided to re-ask the outstanding question. I have implemented light points with shadow casting as shown here but I would like an overall map light with no point/light source. The map setup is a top-down 2-d 50X50 pixel grid. How would I go about implementing a day/night cycle lighting across a map?

    Read the article

  • List has no value after adding values in

    - by Sigh-AniDe
    I am creating a a ghost sprite that will mimic the main sprite after 10 seconds of the game. I am storing the users movements in a List<string> and i am using a foreach loop to run the movements. The problem is when i run through the game by adding breakpoints the movements are being added to the List<string> but when the foreach runs it shows that the list has nothing in it. Why does it do that? How can i fix it? this is what i have: public List<string> ghostMovements = new List<string>(); public void UpdateGhost(float scalingFactor, int[,] map) { // At this foreach, ghostMovements has nothing in it foreach (string s in ghostMovements) { // current position of the ghost on the tiles int mapX = (int)(ghostPostition.X / scalingFactor); int mapY = (int)(ghostPostition.Y / scalingFactor); if (s == "left") { switch (ghostDirection) { case ghostFacingUp: angle = 1.6f; ghostDirection = ghostFacingRight; Program.form.direction = ""; break; case ghostFacingRight: angle = 3.15f; ghostDirection = ghostFacingDown; Program.form.direction = ""; break; case ghostFacingDown: angle = -1.6f; ghostDirection = ghostFacingLeft; Program.form.direction = ""; break; case ghostFacingLeft: angle = 0.0f; ghostDirection = ghostFacingUp; Program.form.direction = ""; break; } } } } // The movement is captured here and added to the list public void captureMovement() { ghostMovements.Add(Program.form.direction); }

    Read the article

  • How to procedurally (create) grow an artistic (2D) tree in real-time (L-System?).

    - by lalan
    Recently I programmed an L-system module, It got me interested further. I am a Plants vs Zombies junkie as well, really liked the concept of Tree of Wisdom. Would love to create similar procedural art just for fun and learn more. Question: How should I approach the process of creating an artistic tree (2d perhaps with fixed camera/perspective) dynamically? Ideally I would like to start with a plant (only a stem with a leaf) and grow it dynamically using some influence (input/user action) over its structure. These influences may result in different type of branching, curves in branches, its spread, location of fruits, color of flowers, etc. Want it to be really full of life/spirit. :) Plants vs Zombies: Tree of wisdom It would be great to dynamically grow a similar tree, but with lot more variation and animations happening. My Background: Student / Programmer, have used few game engines (Ogre3d, cocos2d, unity). Haven't really programmed directly using openGL, trying to fix that :). I am ready to spend considerable time, Please let me know about the APIs? and how would an expert like you would take on this problem? Why 2D? I think it's easier to solve the problem only considering 2 dimensions. Artistic inspirations: Only the tree, with fruits and leaves, without the shrubs at the bottom The large tree (visible branches, green leaves, flowers, fruits, etc) on the left, behind monkey. PixelJunk's Eden (Art style inspiration). Procedurally Generated Apple Tree using Fractals Please let me know if it was easy for you to understand the question, I may elaborate further. I hope a discussion of various approach would be helpful for everyone. You guys are awesome.

    Read the article

  • Behaviour tree code example?

    - by jokoon
    http://altdevblogaday.org/2011/02/24/introduction-to-behavior-trees/ Obviously the most interesting article I found on this website. What do you think about it ? It lacks some code example, don't you know any ? I also read that state machines are not very flexible compared to behaviour trees... On top of that I'm not sure if there is a true link between state machines and the state pattern... is there ?

    Read the article

  • How do I prevent my platformer's character from clipping on wall tiles?

    - by Jonathan Hobbs
    Currently, I have a platformer with tiles for terrain (graphics borrowed from Cave Story). The game is written from scratch using XNA, so I'm not using an existing engine or physics engine. The tile collisions are described pretty much exactly as described in this answer (with simple SAT for rectangles and circles), and everything works fine. Except when the player runs into a wall whilst falling/jumping. In that case, they'll catch on a tile and begin thinking they've hit a floor or ceiling that isn't actually there. The player is moving right and falling downwards. So after movement, collisions are checked - and first, it turns out the player character is colliding with the tile 3rd from the floor, and pushed upwards. Second, he's found to be colliding with the tile beside him, and pushed sideways - the end result being the player character thinks he's on the ground and isn't falling, and 'catches' on the tile for as long as he's running into it. I could solve this by defining the tiles from top to bottom instead, which makes him fall smoothly, but then the inverse case happens and he'll hit a ceiling that isn't there when jumping upwards against the wall. How should I approach resolving this, so that the player character can just fall along the wall as it should?

    Read the article

  • How to implement explosion in OpenGL with a particle effect?

    - by Chan
    I'm relatively new to OpenGL and I'm clueless how to implement explosion. So could anyone give me some ideas how to start? Suppose the explosion occurs at location $(x, y, z)$, then I'm thinking of randomly generate a collection of vectors with $(x, y, z)$ as origin, then draw some particle (glutSolidCube) which move along this vector for some period of time, says after 1000 updates, it disappear. Is this approach feasible? A minimal example would be greatly appreciated.

    Read the article

  • Pokemon Yellow wrap transitions

    - by Alex Koukoulas
    So I've been trying to make a pretty accurate clone of the good old Pokemon Yellow for quite some time now and one puzzling but nonetheless subtle mechanic has puzzled me. As you can see in the uploaded image there is a certain colour manipulation done in two stages after entering a wrap to another game location (such as stairs or entering a building). One easy (and sloppy) way of achieving this and the one I have been using so far is to make three copies of each image rendered on the screen all of them with their colours adjusted accordingly to match each stage of the transition. Of course after a while this becomes tremendously time consuming. So my question is does anyone know any better way of achieving this colour manipulation effect using java? Thanks in advance, Alex

    Read the article

  • AndEngine Foreground Sprite

    - by McGrey
    I'm developing an Android game and have some troubles: I want to add some foreground sprites, that must obstruct my player. Se the following example: Its a screenshot from "Shinobi 3". We can see the player, the enemy, the background and two foreground trees, that hide the player's arm and part of the enemy. I'm using AndEngine GLES2 Anchor Center and I am trying to add a new layer to my scene. Sprite Forest = new Sprite(getWidth() * 0.5f, textureHeightForest * 0.5f + 100, ResourcesManager.getInstance().foreground_forest_region, vbom); Entity foregroundLayer = new Entity(); foregroundLayer.attachChild(hillFurthest); attachChild(foregroundLayer); But it still shows behind my player sprite. I am trying to find something in HUD-class (it's always shown in the foreground), but got no results. Can anyone help please?

    Read the article

  • Drawing texture does not work anymore with a small amount of triangles

    - by Paul
    When i draw lines, the vertices are well connected. But when i draw the texture inside the triangles, it only works with i<4 in the for loop, otherwise with i<5 for example, there is a EXC_BAD_ACCESS message, at @synthesize textureImage = _textureImage. I don't understand why. (The generatePolygons method seems to work fine as i tried to draw lines with many vertices as in the second image below. And textureImage remains the same for i<4 or i<5 : it's a 512px square image). Here are the images : What i want to achieve is to put the red points and connect them to the y-axis (the green points) and color the area (the green triangles) : If i only draw lines, it works fine : Then with a texture color, it works for i<4 in the loop (the red points in my first image, plus the fifth one to connect the last y) : But then, if i set i<5, the debug tool says EXC_BAD_ACCESS at the synthesize of _textureImage. Here is my code : I set a texture color in HelloWordLayer.mm with : CCSprite *textureImage = [self spriteWithColor:color3 textureSize:512]; _terrain.textureImage = textureImage; Then in the class Terrain, i create the vertices and put the texture in the draw method : @implementation Terrain @synthesize textureImage = _textureImage; //EXC_BAD_ACCESS for i<5 - (void)generatePath2{ CGSize winSize = [CCDirector sharedDirector].winSize; float x = 40; float y = 0; for(int i = 0; i < kMaxKeyPoints+1; ++i) { _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += 30; } } -(void)generatePolygons{ _nPolyVertices = 0; float x1 = 0; float y1 = 0; int keyPoints = 0; for (int i=0; i<4; i++){ /* HERE : 4 = OK / 5 = crash */ //V0: at (0,0) _polyVertices[_nPolyVertices] = CGPointMake(x1, y1); _polyTexCoords[_nPolyVertices++] = CGPointMake(x1, y1); //V1: to the first "point" _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); keyPoints++; //from point at index 0 to 1 //V2, same y as point n°2: _polyVertices[_nPolyVertices] = CGPointMake(0, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(0, _hillKeyPoints[keyPoints].y); //V1 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //V2 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //V3 = same x,y as point at index 1 _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); y1 = _polyVertices[_nPolyVertices].y; _nPolyVertices++; } } - (id)init { if ((self = [super init])) { [self generatePath2]; [self generatePolygons]; } return self; } - (void) draw { //glDisable(GL_TEXTURE_2D); glDisableClientState(GL_COLOR_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); glBindTexture(GL_TEXTURE_2D, _textureImage.texture.name); glColor4f(1, 1, 1, 1); glVertexPointer(2, GL_FLOAT, 0, _polyVertices); glTexCoordPointer(2, GL_FLOAT, 0, _polyTexCoords); glDrawArrays(GL_TRIANGLE_STRIP, 0, (GLsizei)_nPolyVertices); glColor4f(1, 1, 1, 1); for(int i = 1; i < 40; ++i) { ccDrawLine(_polyVertices[i-1], _polyVertices[i]); } // restore default GL states glEnable(GL_TEXTURE_2D); glEnableClientState(GL_COLOR_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); } Do you see anything wrong in this code? Thanks for your help

    Read the article

  • How do client-server cooperation based games like Diablo 3 work?

    - by edgar
    Diablo 3 cooperates with Blizzard servers even during single player games. In fact, Blizzard has had problems with the games "melting their servers." I would like to ask: How do the client and the server communicate? What details does the client leave to the server, and vice versa? What details are redundant - both the client and the server know - and how often do they disagree? The previous paragraph contains the important questions, but I have a few more that I must explain my motivation towards. I am interested in the programming of botting. Ethical botting - I don't plan on actually abusing the automation to run 24/7. I just find it to be a great programming challenge to glean information from a game, and then make decisions from that information. I am stuck in the starting gate. The unofficial questions from this post would be: How can I make a bot (language, tools, libraries)? Can I get information through the communication between client and server, rather than the brute force pixel detection easily used in more static games? There probably is a trust issue, and to that all I can say is that I promise not to abuse the answers. But please feel free to answer any of the questions you feel comfortable with. Thank you!

    Read the article

  • tic tac toe game ai as3

    - by David Jones
    I'm looking into creating a simple tic tac toe/noughts and crosses game in actionscript3 and am trying to understand the ideas behind the ai used in a game like this. I've seen some simplistic examples online but from what I've read a game tree or something like minimax is the best way to go about this. Can anyone help explain or reference any good examples of this? I've seen that there is a library called as3ds - data structures for game developers which has a number of classes that might help tie this together? Any info/examples or help is much appreciated

    Read the article

  • 2D Tile-based terrian generation

    - by a240
    As a summer project I decided it would be fun to make a flash game. Right now I'm going for something like the look of http://www.terraria.org/. It's been a lot of fun, but today I've hit a snag. I need a way to generate my worlds. I've read up Perlin Noise ( http://freespace.virgin.net/hugo.elias/models/m_perlin.htm ) as a possibility, but I my attempts have given me sporadic looking results. What are some techniques used to generate these 2D tile-based worlds? Ideally I would like to be able to generate mountains, plains, and caves.

    Read the article

  • Displaying and updating score in Android (OpenGL ES 2)

    - by user16547
    I'm using a FrameLayout where I have a GLSurfaceView at the bottom and a few Views on top of it. One of those Views is a TextView that displays the current score. Here's how I'm updating the score TextView based on what happens in my game loop: whenever an event happens that increases the score, I call activity.runOnUiThread(updater), where activity is the activity that has the above FrameLayout (my main game activity) and updater is just a Runnable that increments the score. From my understanding, using runOnUiThread() from the OpenGL thread is standard practice - otherwise you'll get an exception, I can't remember its name. The problem is that there's a very noticeable lag between the event and the score update. For example the character gets a coin, but the coin count is not updated quickly. I tried summing all the score events from my game loop and calling runOnUiThread() only once per loop, but it doesn't seem to make much of a difference - the lag is still noticeable. How can I improve my design to avoid this lag?

    Read the article

  • Isometric algorithm [fixed]

    - by David
    so i've been toying with isometric and i just cant get the tiles to be in the right order. im probably missing something obvious and i just cant see it... but even at the risk of looking stupid, heres my code. for (int i = 0; i < Tile.MapSize; i++) { for (int j = 0; j < Tile.MapSize; j++) { spriteBatch.Draw( Tile.TileSetTexture, new Rectangle( (-j * Tile.TileWidth / 2) + (i * Tile.TileWidth / 2), (i * (Tile.TileHeight - 9) / 2) - (-j * (Tile.TileHeight - 9) / 2), Tile.TileWidth, Tile.TileHeight), Tile.GetSourceRectangle(tileID), Color.White, 0.0f, new Vector2(-350, -60), SpriteEffects.None, 1.0f); } } and heres what i end up with delicious messed up map yep, bit of an issue. so if anyone could help, i'd appreciate it. edit* works now <_<

    Read the article

  • My rhythm game runs choppy even with high frame rate

    - by felipedrl
    I'm coding a rhythm game and the game runs smoothly with uncapped fps. But when I try to cap it around 60 the game updates in little chunks, like hiccups, as if it was skipping frames or at a very low frame rate. The reason I need to cap frame rate is because in some computers I tested, the fps varies a lot (from ~80 - ~250 fps) and those drops are noticeable and degrade response time. Since this is a rhythm game this is very important. This issue is driving me crazy. I've spent a few weeks already on it and still can't figure out the problem. I hope someone more experienced than me could shed some light on it. I'll try to put here all the hints I've tried along with two pseudo codes for game loops I tried, so I apologize if this post gets too lengthy. 1st GameLoop: const uint UPDATE_SKIP = 1000 / 60; uint nextGameTick = SDL_GetTicks(); while(isNotDone) { // only false when a QUIT event is generated! if (processEvents()) { if (SDL_GetTicks() > nextGameTick) { update(UPDATE_SKIP); render(); nextGameTick += UPDATE_SKIP; } } } 2nd Game Loop: const uint UPDATE_SKIP = 1000 / 60; while (isNotDone) { LARGE_INTEGER startTime; QueryPerformanceCounter(&startTime); // process events will return false in case of a QUIT event processed if (processEvents()) { update(frameTime); render(); } LARGE_INTEGER endTime; do { QueryPerformanceCounter(&endTime); frameTime = static_cast<uint>((endTime.QuadPart - startTime.QuadPart) * 1000.0 / frequency.QuadPart); } while (frameTime < UPDATE_SKIP); } [1] At first I thought it was a timer resolution problem. I was using SDL_GetTicks, but even when I switched to QueryPerformanceCounter, supposedly less granular, I saw no difference. [2] Then I thought it could be due to a rounding error in my position computation and since game updates are smaller in high FPS that would be less noticeable. Indeed there is an small error, but from my tests I realized that it is not enough to produce the position jumps I'm getting. Also, another intriguing factor is that if I enable vsync I'll get smooth updates @60fps regardless frame cap code. So why not rely on vsync? Because some computers can force a disable on gfx card config. [3] I started printing the maximum and minimum frame time measured in 1sec span, in the hope that every a few frames one would take a long time but still not enough to drop my fps computation. It turns out that, with frame cap code I always get frame times in the range of [16, 18]ms, and still, the game "does not moves like jagger". [4] My process' priority is set to HIGH (Windows doesn't allow me to set REALTIME for some reason). As far as I know there is only one thread running along with the game (a sound callback, which I really don't have access to it). I'm using AudiereLib. I then disabled Audiere by removing it from the project and still got the issue. Maybe there are some others threads running and one of them is taking too long to come back right in between when I measured frame times, I don't know. Is there a way to know which threads are attached to my process? [5] There are some dynamic data being created during game run. But It is a little bit hard to remove it to test. Maybe I'll have to try harder this one. Well, as I told you I really don't know what to try next. Anything, I mean, anything would be of great help. What bugs me more is why at 60fps & vsync enabled I get an smooth update and at 60fps & no vsync I don't. Is there a way to implement software vsync? I mean, query display sync info? Thanks in advance. I appreciate the ones that got this far and yet again I apologize for the long post. Best Regards from a fellow coder.

    Read the article

  • How do I go from a simple html5 tic tac toe game to an online 2 player game?

    - by phi1o
    I've been working on an online 2 player Tic Tac Toe solution for blackberries. both old and new. And so far I have html5 code that has a 3 x 3 layout that switches between x and o for the game mechanics. I believe I'm still missing a check for win function but my question is about the server side of this game. I'm not sure how to go about learning what exactly I want. how do you take what I have now, and make this into a functioning online game? I've been told WAMP is a good solution, as well as IIS. and its all really over my head, so i'm hoping to get a little more clarity as far as what I should focus on to bring this game to life.

    Read the article

  • Drawing 2D Grid in 3D View - Need help with method

    - by Deukalion
    I'm trying to draw a simple 2D grid for an editor, to able to navigate more clearly around the 3D space, but I can't render it: Grid2D class, creates a grid of a certain size at a location and should just draw lines. public class Grid2D : IShape { private VertexPositionColor[] _vertices; private Vector2 _size; private Vector3 _location; private int _faces; public Grid2D(Vector2 size, Vector3 location, Color color) { float x = 0, y = 0; if (size.X < 1f) { size.X = 1f; } if (size.Y < 1f) { size.Y = 1f; } _size = size; _location = location; List<VertexPositionColor> vertices = new List<VertexPositionColor>(); _faces = 0; for (y = -size.Y; y <= size.Y; y++) { vertices.Add(new VertexPositionColor(location + new Vector3(-size.X, y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(size.X, y, 0), color)); _faces++; } for (x = -size.X; x <= size.X; x++) { vertices.Add(new VertexPositionColor(location + new Vector3(x, -size.Y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(x, size.Y, 0), color)); _faces++; } _vertices = vertices.ToArray(); } public void Render(GraphicsDevice device) { device.DrawUserPrimitives<VertexPositionColor>(PrimitiveType.LineList, _vertices, 0, _faces); } } Like this: +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ Anyone knows what I'm doing wrong? If I add a Shape without texture, it's set automatically to VertexColorEnabled and TextureEnabled = false. This is how I render it: foreach (RenderObject render in _renderObjects) { render.Effect.Projection = projection; render.Effect.View = view; render.Effect.World = world; foreach (EffectPass pass in render.Effect.CurrentTechnique.Passes) { pass.Apply(); try { // Could be a Grid2D render.Shape.Render(_device); } catch { throw; } } } Exception is thrown: The current vertex shader declaration does not include all the elements required by the current Vertex Shader. Normal0 is missing. Simply put, I can't figure out how to draw a few lines. I want to draw them one at a time and I guess that's the problem I haven't figured out, and even when I tried rendering vertices[i], vertices[i+1] and primitiveCount = 1, vertices = 2, and so on it didn't work either. Any suggestions?

    Read the article

  • Suggestions to start a cross-platform project

    - by Gabriele
    I have a big project in my head, it should be cross-platform (Win, Max and Linux), online (Client - Server) and with 3D graphics. I would like some suggestions to start with the right things. Currently I'm a PHP/MySQL coder, I used to code in C and Pascal on DOS ages (Borland Times ;)), my C knowlegde need a refresh but it's ok. I guess C++ it's the right language. What platform and what i should use to code? I can choose from all three platforms. My idea was to use Visual Studio 2010 C++, but i'm not sure if it support Native code. What kind of libraries should i use? I guessed OpenSSL for the login, OpenGL for graphics part. For the Audio or the GUI? Any other suggestions are well accepted. I know it's a "BIG DEAL" but I have no rush and it'll be a free-time project, only for my pleasure. Thank you in advance.

    Read the article

  • How to create a copy of an instance without having access to private variables

    - by Jamie
    Im having a bit of a problem. Let me show you the code first: public class Direction { private CircularList xSpeed, zSpeed; private int[] dirSquare = {-1, 0, 1, 0}; public Direction(int xSpeed, int zSpeed){ this.xSpeed = new CircularList(dirSquare, xSpeed); this.zSpeed = new CircularList(dirSquare, zSpeed); } public Direction(Point dirs){ this(dirs.x, dirs.y); } public void shiftLeft(){ xSpeed.shiftLeft(); zSpeed.shiftRight(); } public void shiftRight(){ xSpeed.shiftRight(); zSpeed.shiftLeft(); } public int getXSpeed(){ return this.xSpeed.currentValue(); } public int getZSpeed(){ return this.zSpeed.currentValue(); } } Now lets say i have an instance of Direction: Direction dir = new Direction(0, 0); As you can see in the code of Direction, the arguments fed to the constructor, are passed directly to some other class. One cannot be sure if they stay the same because methods shiftRight() and shiftLeft could have been called, which changes thos numbers. My question is, how do i create a completely new instance of Direction, that is basically copy(not by reference) of dir? The only way i see it, is to create public methods in both CircularList(i can post the code of this class, but its not relevant) and Direction that return the variables needed to create a copy of the instance, but this solution seems really dirty since those numbers are not supposed to be touched after beeing fed to the constructor, and therefore they are private.

    Read the article

  • Best way to blend colors in tile lighting? (XNA)

    - by Lemoncreme
    I have made a color, decent, recursive, fast tile lighting system in my game. It does everything I need except one thing: different colors are not blended at all: Here is my color blend code: return (new Color( (byte)MathHelper.Clamp(color.R / factor, 0, 255), (byte)MathHelper.Clamp(color.G / factor, 0, 255), (byte)MathHelper.Clamp(color.B / factor, 0, 255))); As you can see it does not take the already in place color into account. color is the color of the previous light, which is weakened by the above code by factor. If I wanted to blend using the color already in place, I would use the variable blend. Here is an example of a blend that I tried that failed, using blend: return (new Color( (byte)MathHelper.Clamp(((color.R + blend.R) / 2) / factor, 0, 255), (byte)MathHelper.Clamp(((color.G + blend.G) / 2) / factor, 0, 255), (byte)MathHelper.Clamp(((color.B + blend.B) / 2) / factor, 0, 255))); This color blend produces inaccurate and strange results. I need a blend that is accurate, like the first example, that blends the two colors together. What is the best way to do this?

    Read the article

  • Glitch-free cross-fades in HTML5

    - by Alexander Gladysh
    In my HTML5 canvas game, I need to cross-fade two sprites which have some glow around them. (Glow is backed into sprites.) Initially, the first sprite is visible. During the cross-fade the first sprite should vanish, and be replaced with the second one. How exactly the cross-fade is done — does not matter, as long as it is smooth and there are no visual glitches. I've tried two techniques: During the cross-fade I simultaneously interpolate alpha of the first sprite from 1.0 to 0.0, and alpha of the second sprite — from 0.0 to 1.0. With this technique I can see background in the middle of the cross-fade. That's because both sprites are semi-transparent most of the time. During the cross-fade I first interpolate alpha of the second sprite from 0.0 to 1.0 (first sprite alpha is at 1.0), and then interpolate alpha of the first sprite from 1.0 to 0.0. With this technique background is not seen, but the glow around sprites flashes during the cross-fide — when both sprites are near the full visibility. In non-HTML5 game I'd use shaders to do cross-fade separately in RGB and alpha channels. Is there a trick to do the cross-fade I need in HTML5 without visual glitches?

    Read the article

  • How should I handle "real time" events in an online strategy game?

    - by Hojat Taheri
    Some online strategy games have real time events. For example when you send troops to attack somewhere, the attack happens at the right time in the future. Checking the database again and again to get the list of attacks happening each second would cause heavy load. Is there any technique to achieve this goal? Another example: You want to attack a village 3 hours away, you send troops and the attack occurs 3 hours later. Should there be an script to check the database at each second to run the query at the specified time?

    Read the article

  • How does a game developer get feedback from gamers (not developers) or start a forum community without paying for advertising or hiring Q&A teams?

    - by Carter81
    I am familiar with a lot of game developer forums, but I'd assume this is much less likely to attract more casual commentators. I also fear that feedback from a gamer's perspective would often be tainted by their game dev perspective. For example, if I were making a RTS game and wanted to get feedback from "The RTS gamers" where would I go? Is there a general idea of what type of website or forum to go to? Do you go to specific game websites, to try to "steal" attention? Would this not equate to spam or inappropriate posting? What is considered appropriate and inappropriate? I am not asking for specifics. I am asking how one "starts a community", or how one "gets feedback from gamers" without resorting to spamming forums or 'advertising' just to see what sticks. What TYPE OF PLACE does one go? Are there already sites designed for this purpose? I tried going to what was once a very popular forum for feedback from what I believed was a niche hardcore group of gamers in the genre, but its popularity seemed to have died significantly; Leaving only trolls and very young teenagers. The resulting feedback was quite disappointing, mainly for how little feedback it resulted. Many years ago, feedback would flood in by the hundreds so quickly. Without this website, I am at a loss as to where to go to see what people think of ideas, gather feedback from a gamer's perspective (not a developer's perspective), or where to pull from to start my own site's forum. I am out of ideas of what to do, short of going to various game forums to post in the off-topic sections there.

    Read the article

  • Smooth animation on a persistently refreshing canvas

    - by Neurofluxation
    Yo everyone! I have been working on an Isometric Tile Game Engine in HTML5/Canvas for a little while now and I have a complete working game. Earlier today I looked back over my code and thought: "hmm, let's try to get this animated smoothly..." And since then, that is all I have tried to do. The problem I would like the character to actually "slide" from tile to tile - but the canvas redrawing doesn't allow this - does anyone have any ideas....? Code and fiddle below... Fiddle with it! http://jsfiddle.net/neuroflux/n7VAu/ <html> <head> <title>tileEngine - Isometric</title> <style type="text/css"> * { margin: 0px; padding: 0px; font-family: arial, helvetica, sans-serif; font-size: 12px; cursor: default; } </style> <script type="text/javascript"> var map = Array( //land [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]], [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]], [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]], [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]], [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]], [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]], [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]], [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]], [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]], [[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]] ); var tileDict = Array("http://www.wikiword.co.uk/release-candidate/canvas/tileEngine/land.png"); var charDict = Array("http://www.wikiword.co.uk/release-candidate/canvas/tileEngine/mario.png"); var objectDict = Array("http://www.wikiword.co.uk/release-candidate/canvas/tileEngine/rock.png"); //last is one more var objectImg = new Array(); var charImg = new Array(); var tileImg = new Array(); var loaded = 0; var loadTimer; var ymouse; var xmouse; var eventUpdate = 0; var playerX = 0; var playerY = 0; function loadImg(){ //preload images and calculate the total loading time for(var i=0;i<tileDict.length;i++){ tileImg[i] = new Image(); tileImg[i].src = tileDict[i]; tileImg[i].onload = function(){ loaded++; } } i = 0; for(var i=0;i<charDict.length;i++){ charImg[i] = new Image(); charImg[i].src = charDict[i]; charImg[i].onload = function(){ loaded++; } } i = 0; for(var i=0;i<objectDict.length;i++){ objectImg[i] = new Image(); objectImg[i].src = objectDict[i]; objectImg[i].onload = function(){ loaded++; } } } function checkKeycode(event) { //key pressed var keycode; if(event == null) { keyCode = window.event.keyCode; } else { keyCode = event.keyCode; } switch(keyCode) { case 38: //left if(!map[playerX-1][playerY][1] > 0){ playerX--; } break; case 40: //right if(!map[playerX+1][playerY][1] > 0){ playerX++; } break; case 39: //up if(!map[playerX][playerY-1][1] > 0){ playerY--; } break; case 37: //down if(!map[playerX][playerY+1][1] > 0){ playerY++; } break; default: break; } } function loadAll(){ //load the game if(loaded == tileDict.length + charDict.length + objectDict.length){ clearInterval(loadTimer); loadTimer = setInterval(gameUpdate,100); } } function drawMap(){ //draw the map (in intervals) var tileH = 25; var tileW = 50; mapX = 80; mapY = 10; for(i=0;i<map.length;i++){ for(j=0;j<map[i].length;j++){ var drawTile= map[i][j][0]; var xpos = (i-j)*tileH + mapX*4.5; var ypos = (i+j)*tileH/2+ mapY*3.0; ctx.drawImage(tileImg[drawTile],xpos,ypos); if(i == playerX && j == playerY){ you = ctx.drawImage(charImg[0],xpos,ypos-(charImg[0].height/2)); } } } } function init(){ //initialise the main functions and even handlers ctx = document.getElementById('main').getContext('2d'); loadImg(); loadTimer = setInterval(loadAll,10); document.onkeydown = checkKeycode; } function gameUpdate() { //update the game, clear canvas etc ctx.clearRect(0,0,904,460); ctx.fillStyle = "rgba(255, 255, 255, 1.0)"; //assign color drawMap(); } </script> </head> <body align="center" style="text-align: center;" onload="init()"> <canvas id="main" width="904" height="465"> <h1 style="color: white; font-size: 24px;">I'll be damned, there be no HTML5 &amp; canvas support on this 'ere electronic machine!<sub>This game, jus' plain ol' won't work!</sub></h1> </canvas> </body> </html>

    Read the article

  • J2ME character animation with multiple sprite sheets

    - by Alex
    I'm working on a J2ME game and I want to have walking animations. Each direction of walking has a separate sprite sheet (i.e. one for walking up, one for walking right etc), I also have a static idle image for each direction held together in a single file. I've tried to hold an array of sprites in my player class and then just drawing the sprite corresponding to the current direction, but this doesn't seem to work. I'm aware that if I combine all the animations into one sprite sheet I could set up different animation sequences, but I want to be able to do it with separate images for each animation. Is there a way that anyone knows of to achieve this? And ideally without too much extra code (as opposed to combining the sprites into one sheet)

    Read the article

< Previous Page | 454 455 456 457 458 459 460 461 462 463 464 465  | Next Page >