Search Results

Search found 1574 results on 63 pages for 'dsl modem'.

Page 46/63 | < Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >

• Credentials needed for BT line on Netgear router

  - by Bali C

  I have recently bought a new Netgear router to replace my current BTHomeHub as it doesn't support wireless. I did buy a WAP but figured it would be easier to use a router with wireless built in. (It's a modem/router combo). I have got as far as setting up the router on the web interface, but then it asks for a username and password to connect to the net, I can only assume this is for the phone line? I have tried some passwords I could find written down but they don't work, the internet light comes on and then when the creds fail it goes off. I have been on the homehubs web interface and been through all the settings it has to find the credentials it is using which obviously work, but no joy. Is there anything obvious I am missing, or is there a way I can retrieve my settings from my existing router? Any pointers will be very appreciated.

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user51737

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• Why is Server 2012 assigning "169.254.*.*" series when creating DHCP server?

  - by Seth

  I have a small office, with ATT Motorola modem (192.168.1.254) set as passthrough to Dlink DIR-815 (LAN 192.168.0.1) I am trying to setup DHCP server on Server 2012, and when I create new DHCP server, the title is created as 169.254.. instead of the domain name. (Domain clients can retrieve IP's as defined in the scope) Non-domain clients are not receiving IP's from the server but rather the Motorola... How do I assure DHCP setup is properly creating itself, and how do I make sure domain and non-domain clients get IP's from the server?

  Read the article

• Windows Server 2003: Router, DHCP, Looses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server looses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• What are the essential considerations for setting up systems in a location with unreliable power?

  - by dunxd

  I deal with a lot of remote offices located in parts of the world where the local grid power supply is unreliable. Power can go off anytime with no warning, with outages ranging from minutes to days Power fluctuation is wild, with spikes and brown outs Currently the offices will have some or all of the following: A generator, with an inverter, or some sort of manual switch A big UPS or battery array connecting a number of devices Several smaller APC UPS with computers attached Low cost Voltage Regulators sometimes connected between mains and UPS or device. I know that each of these things needs to be appropriately rated for the equipment to which it is connected (although I am not sure how to calculate the correct rating). The offices will generally have the following equipment (in varying quantities): some sort of internet connection device (VSAT router, ADSL modem, WiMax router) Cisco ASA 5505 firewall a bunch of PCs printers one server I don't seek to replace the advice of an electrician, but in some of these locations they only answer the questions you ask them, so I need to make sure I have enough understanding of the essentials to protect equipment from damage, and possibly get through some power cuts.

  Read the article

• Windows Server 2003: Router, DHCP, Loses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server loses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• What is the formula for HughesNet FAP calculation?

  - by JohnFx

  I am somewhat frustrated with the only FAP monitor I have found on the net and discovered because it relies on a running count of bandwidth usage which (1) requires a service in the background; and (2) Tends to get inaccurate over time. Given that there is a diagnostics page on the firmware of the modem that tells the exact usage per hour, I was planning on writing a more accurate version with a better UI. However, it appears that HughesNet keeps the exact formula for calculating whether you are in FAP a secret. I have no idea why they wouldn't be more forthcoming with this information. Wondering if anyone out in SU-land had done some trial and error testing to reverse engineer the formula or had some inside knowledge to share.

  Read the article

• Windows 8.1 update effectively disabled mobile broadband connection

  - by natarajan

  I have Windows 8.1 on my HP laptop and a Huawei broadband modem which was working fine but since some of the updates of Windows 8.1 it is now not working. I have following issue: Under Device Manager Network Adaptor it shows the Hauwei mobile E303H but when I click on it and go to the Driver tab I can see that no device driver is installed. When I click to update the driver and select the generic mobile broadband adaptor it fails and shows "access denied". How do I go about replacing the driver for this?

  Read the article

• Can't access internet even though everything is working

  - by entity64

  A friend recently upgraded to a new cable internet connection. The modem connects to the router and various PCs and smartphones from her roommates connect to the router. They don't have any problem accessing the internet. She has Windows 8 and can't access any website (via wifi and ethernet). DNS (UDP) is working, DHCP set up everything correctly, Wifi is working, Trace routes and Pings (ICMP) go through with no problem at all. But neither Dropbox nor Skype nor Spotify nor any browser (all TCP) can access any website. The thing is though, she can connect through the university wifi and via a neighbors wifi. It's just her home connection. No firewalls are running and the computer is clean - no malware. How could it be that only her home connection won't work and others do?

  Read the article

• Share files - Ubuntu 12.4 and Windows 7 - one network - password not accepted

  - by gotqn

  I have three machines - two with windows 7 and one with Ubuntu 12.4 version. There are in the same network connected by modem. The two machines shares file with no problem, but they can not see the machine with Ubuntu. On the other hand, I am able to see the share files of the windows machines from the Ubuntu's Network. When I select a folder, it wants the network password - I changed it several times in order to be sure that I am entering the correct one but in every case it says that the password is wrong. I have read some topics about files sharing between Linux and windows in which it is said that I should use samba, but is there a more easy way to do this, using the build it options?

  Read the article

• My computer gets hosted when using 3G

  - by WeaklyTyped

  I recently activated 3G(UMTS) connection on my cellular network. I use Nokia S60 phone as a modem while connecting from Scientific Linux 6. While I am able to access net pretty well, the problem is my computer gets hosted. By using ip-address in a web-browser, anyone can access my localhost (running apache), this never happens with my wireline (ADSL) connection. Furthermore, even the Shell prompt changes from: [mach2@localhost ~]$ to [[email protected] ~]$ where XX.XX.XX.XX is the IP of the 3G connection. The very thought of putting my machine 'in the wild' is disconcerting. How can I rectify the situation without disabling services like apache, sshd and others?

  Read the article

• problem on expand network using a router

  - by Jose

  I have a Netgear FS605 v3 router, and i'm trying to expand my network. The router is connected to the cable modem with cat5 cable. I have 2 laptop connected to the router but i'm only able to get internet connectivity in one. The first laptop i turn on, get the signal and the other one will show no connectivity. I have restarted all the devices many times but no luck. Can somebody explain me how to get this solved. Thanks.

  Read the article

• DNS point to server on ISP and keep shared host too?

  - by Dwayne

  I know this is probably quite easy to do, but I might just have the right search sorted out... so here is the situation: We have example.com set up as a hosted server along with app1.example.com, app2.example.com and a few others. What I would like to do is set up the right zone file to also make our internal server addressable from the outside world as internalapp.example.com. This server sits behind a firewall (pfsense) and is hooked up to the world via a cable modem that is technically on DHCP from our ISP, but has had the same external IP for the past 15 months so far. What would be the best way to set this up?

  Read the article

• ISP Couldn't Verify My HFC MAC Id

  - by Ann Rahn

  An Internet Service Provider whom I used in the past, claims to provide me with Internet service. However, when I gave his technician the Hybrid Fiber - COX MAC ID on my Modem, he could not find it on his list. Also, the Internet Service Provider doesn't even have my current mailing address. All he has is my phone number and he is demanding payment. On the other hand, I use a cable service which provide TV. At this point, the Internet Service Provider is threatening to disconnect my Internet service. My question: How can I verify if I am getting the service from him or through the cable?

  Read the article

• Removing integrated video card drivers broke other hardware?

  - by jsnlxndrlv

  I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

  Read the article

• Ping reply not getting to LAN machines but getting in Linux router Gateway

  - by Kevin Parker

  I have configured Ubuntu 12.04 as Gateway machine.its having two interfaces eth0 with ip 192.168.122.39(Static) and eth1 connected to modem with ip address 192.168.2.3(through DHCP). ip-forwarding is enabled in router box. Client machine is configured as: ip address 192.168.122.5 and gateway 192.168.122.39 Client machines can ping router box(192.168.122.39).but when pinged 8.8.8.8 reply is not reaching Client machines but in the tcpdump output on gateway i can see echo request for 8.8.8.8 but never echo reply.Is this because of 122.5 not forwarding request to 2.0 network.Can u please help me in fixing this.

  Read the article

• Windows Internet Connection sharing with Mobile Broadband

  - by PaoloFCantoni

  Due to circumstances, I have only got mobile broadband where I am living. I have a small network with a ADSL Router (but which isn't connected to the Internet. I want to use ICS to allow one machine (with the MBB modem) to act as the Internet interface and allow other machines connected to the ADSL router (including a new Android tablet by WiFi) to use the single mobile broadband connection. I've a feeling that my configuration is not valid - as it stands, but I'm not sure. Can some kind soul lead me "by the nose" to getting this working? FWIW The mahcines are all running Windows 7 TIA, Paolo

  Read the article

• Connect macbook to my LAN through a VPN - best solution? [closed]

  - by LewisMc

  So I have a LAN connected via a ADSL/PPPoA, this is using a bog-standard DLink router supplied by my ISP (talktalk UK). I have a NAS within the LAN that is running FreeNAS and I want to be able to connect to it when I'm out and about. It's running an atom so it's quite low on juice consumption but I don't want to have it on all day and night so I've been waking it via a magic packet and booting it down from the web admin when I need it. So I want to connect to the LAN, I presume via a VPN, to be able to send a magic packet. But what is the best method to accomplish this, or is there an easier way? I've been looking at the cisco 857 integrated router and the Netgear prosafe 318(behind modem) but not sure If I'm on the right track with what I want to achieve as I've not much experience or knowledge with VPN's or networking (software engineering student). I have tried port forwarding but to no avail, either with magic packets or even connecting outside the LAN via DYNDNS. Thanks,

  Read the article

• Unable to ping between subnets and out to internet

  - by battlemidget

  My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

  Read the article

• trying to set up wireless router, failing

  - by j j

  Hi, I am trying to set up Netgear's wireless-n WNR2000 router, following their oversimplified 5- step process for plugging in wires, and I'm not having any success. It comes down to: once everything is wired and turned on in the correct order, all of the LEDs match the image they give of 'what should be lit up', but their setup disk still doesn't find the router. They have a site to set up the router manually, www.routerlogin.net, which I cannot navigate to, even while wired directly to the router. http://192.168.1.1 doesn't connect to anything, either. The interesting part: i get ping replies from Google's DNS server at 8.8.8.8 while this is set up. but cannot connect to any web site by name, since the router's DNS isn't set up. One thought is that the router and modem both have the same IP address, so it's conflicting, but I'm not sure how I'd resolve that. Any ideas?

  Read the article

• How to connect to internet 2 or more pcs with an usb wifi adapter

  - by bhaoahd

  In one pc I have an USB Wifi adapter (Realtek RTL8187L Chipset), from there a 10 meters cable to an outdoor antenna. With that I connect to a public Access Point. Now I want to be able to connect more computers to internet using that same connection that comes from the outdoor antenna, what options do I have to do this? I do have another usb wifi adapter with a small omni antenna, and a router encore ENHWI-G/A. This router can be used as a Wifi AP, but it needs a modem that works with the RJ45 connector. Is there a way I could take internet from the outdoor antenna, and create another AP indoor using that router to "repeat" that wifi that comes from the outdoor antenna? If creating this second AP is not possible, should I use some sort of local network between computers, connect my main PC with the outdoor antenna, and share the connection through the lan? (I would really prefer to have a second AP indoor so I can connect other devices like a Palm, but I am not sure how could this be possible with this router and the usb wifi adapter)

  Read the article

• Can I use my Belkin router as a repeater?

  - by Kyle R

  I've got a brand new, unopened Belkin N600 DB router (yay 50% off sale), and I can't seem to figure out if I can use it as a repeater. As far as I can tell, it doesn't support DD-WRT or Tomato, but I'm wondering if there may be some way to rig it up to repeat Wifi. Also, I really need to know before I open it, because, being a bit tight on money at the moment, I'll probably sell it if I can't use it as a repeater. Finally, two caveats: I can't use the other wireless router for anything other than broadcasting straight from the modem (parents are paranoid about anything technological). I can't run ethernet to the second router due to the layout of the house. Thanks so much for the help everyone--if I'm being vague, tell me! EDIT: Also, the manual here is pretty useless on this topic as far as I can tell.

  Read the article

• Lynksys WRT120N wireless router not connecting to ADSL

  - by pradeetp

  I have a lynksys WRT120N wireless router that was connected to Sterlite ADSL modem. The internet connection was working fine through wireless access. I changed the ADSL router because it developed some power issues and got it replaced with the same model/brand from the service provider. However I am not able to access internet now. Here is the current setting Sterlite SAM300 XA IP Address: 192.168.2.1 (I changed it to this IP because the IP address of my ADSL router was same) Lynksys WRT120N wireless router IP Address: 192.168.1.1 If I connect my laptop to ADSL router directly, the internet works fine. It is only that that if I access it wirelessley through wireless router that I am not able to connect to internet. The IP address setting has been configured to obtain IP address automatically. I have windows 7 OS home edition. Could someone please help me to fix this issue.

  Read the article

• Unable to connect to sharedfax error

  - by Owl

  I'm running SBS2k on a machine with a 56k modem for all outgoing faxes. We have a terminal server running server 2003 enterprise and in printers the sharedfax shows "unable to connect status". When you right-click, properties, it gives you an error saying the spool service is not running and you cannot view properties. The spooler service is indeed running on the 2k3 server because I can view the other printer's properties..and on 2k I show the Microsoft Shared Fax service AND Print Spooler as started. Here's the tricky part, I can add the shared fax printer on a domain computer locally (Windows XP) and it will show ready status and I can send faxes, they show up on the 2k server's fax console manager as in progress. I've sent a couple from a few different workstations today successfully, but still unable to send from 2k3 terminal services.

  Read the article

• Can ping cannot be pinged

  - by slayerIQ

  Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can i solve this?

  Read the article

< Previous Page | 42 43 44 45 46 47 48 49 50 51 52 53  | Next Page >