Search Results

Search found 16616 results on 665 pages for 'home sharing'.

Page 464/665 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

  • Using a PC + headset as a telephone without VOIP

    - by user76782
    I'm trying to find a way to realize a decentralized callcenter, so that the callcenter agents can talk from their home office with just a PC + headset. The big challange is that some of the agents have very low bandwith and the quality with VOIP is too bad. So my question is: What other solutions are possible when VOIP is not a option? What exactly do I need to do if I try to achieve this with for example Landline/PBX or GSM? (e.g. Which software do I need to install? Which device do I need?)

    Read the article

  • Internet access using Edimax BR-6204WG as NIC

    - by Mat Richardson
    My internet access at home is provided by Virgin Media via their superhub. I have a laptop with no NIC - however I do have a spare wireless router, the Edimax BR-6204WG, which I have been led to believe can be used to bridge wireless connections. Only problem is, I'm not sure how to go about doing this. The manual for the device is here:- http://www.edimax.co.uk/images/Image/manual/Wireless/BR-6204Wg/BR-6204Wg_Manual.pdf Basically, I want to be able to connect the Edimax wireless router to my laptop using ethernet cable and to use it to pick up the wireless connection from my Virgin superhub. I've managed to get so far in some ways, but then I'm stuck.

    Read the article

  • Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

    - by Tim
    Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

    Read the article

  • Browser language detection & content ranking for new language on the same site.

    - by Arnaud
    I've been reading a lot about it but it's still really hard to make up my mind. My understand is that if your website provide a link to the other language, this should not be an issue for google as long as your links are clear and clean, google will be able to make his way through it. The website was orginaly in french and I added the english version and I'm just worry that english speaker will just leave if the site is not in the correct language, for the home page I just wanted to get the value from the browser and redirect it to /fr/ or /en/ for the first page. (using php this will be very easy) Could you guys have a look at it and tell me what you think about it http://tinyurl.com/bpc5bn9 I don't want to get it wrong and lost my ranking with google. Also the website has good rank on the french side and the english has been online for 2 weeks and only get few visit a day, is that because all the back link refer to /fr/ and google is cleaver enough to decide that they are 2 differantes website and the back link will have to point to /en/ to increase the ranking value? Or will take few more weeks for the website to grow? Thanks for your hep

    Read the article

  • The canonical "blocking BitTorrent" question

    - by Aphex5
    How can one block, or severely slow down, BitTorrent and similar peer-to-peer (P2P) services on one's small home/office network? In searching Server Fault I wasn't able to find a question that served as a rallying point for the best technical ideas on this. The existing questions are all about specific situations, and the dominant answers are social/legal in nature. Those are valid approaches, but a purely technical discussion would be useful to a lot of people, I suspect. Let's assume that you don't have access to the machines on the network. With encryption use increasing in P2P traffic, it seems like stateful packet inspection is becoming a less workable solution. One idea that seems to make sense to me is simply throttling down heavy users by IP, regardless of what they're sending or receiving -- but it doesn't seem many routers support that functionality at the moment. What's your preferred method to throttle P2P/BitTorrent traffic? My apologies if this is a dupe.

    Read the article

  • Python Profiling not installed in Ubuntu? How do I get it in a virtualenv and without apt-get?

    - by interstar
    According to the Python documentation, the "profile" module is part of the standard library. But I can't find it. On my home machine, I was able to add it using apt-get install. (ie. it's split out into a separate ubuntu package.) On my work machine, (also ubuntu) I'm running in a virtualenv, so apt-get install isn't relevant. I can install python modules from pypi using easy-install, but I can't see anything on pypi which corresponds to the profiling module. (Presumably because it's meant to be part of the standard python install.) So how can I install it in this environment?

    Read the article

  • firefox addons and their silly news tabs

    - by jettero
    Something like 30% of the addons I have in firefox update every other week and feel the need to pop open a tab about how awesome they are and all the cool things they changed. I just don't care at all and I'm very annoyed by these news tabs. When firefox opens, I want to see my home page. I've been looking for an addon to disable or kill them before I even have to look at them. Rather like addblock-for-addons. Short of finding a plugin that disables them, I'm seeking information about common interfaces so I can try to figure it out on my own. I'm wondering if I could do it in greasemonkey somehow. For example, is there something common about the url for the tabs?

    Read the article

  • 'server was unable to allocate from the system nonpaged pool' error

    - by cop1152
    Currently users at my company are unable to access their home folder (or any folder on our domain controller). I am working remotely and cant physically access the machine until tomorrow morning, but I can access it with RDC. When I attempt to ping other machines on our network from the machine in question (connected with RDC), I immediately get the error PING: transmit failed. error code 1450. Event Viewer is full of 2019 errors: The server was unable to allocate from the system nonpaged pool because the pool was empty Does anyone have experience with this specific issue? I have found some info with Google, but would like to hear what the pros at SF have top say. This is a Windows 2000 server.

    Read the article

  • Group policy to disable notifications of particular errors?

    - by resolver101
    How do i disable the notifications of particular errors? A little background to my issue. During the installation of the Kaspersky, it disables all the windows firewall for all except the domain. I have remedied this by creating an offline policy in Kaspersky which enables the Kaspersky firewall when out of the office (ie not connected to the office network). The problem now is that users in the office now see a notification showing that the firewall is disabled even though it’s enabled in all scenarios. It’s just that work and home show as disabled when the clients are connected to the office LAN. I’ve looked into the notifications and you can disable the notification (not recommended) but I don’t want to do this incase other relevant messages are stopped from being displayed. http://blogs.technet.com/b/networking/archive/2010/12/16/disabling-firewall-alerts-in-the-action-center.aspx

    Read the article

  • CIFS shares do not mount after upgrade to 12.10 from 12.04

    - by Mothball
    I have seen issues close to my problem but no one seems to have a definitive answer as to what is going on and why the failure occurs. I have a number of NAS devices on my home network and on a previous install of 12.04 and version prior mounting at login worked using this entry for each in fstab: //servername/sharename /media/windowsshare cifs guest,uid=1000,iocharset=utf8,codepage=cp850,cp850 0 0 Now when I use this, 12.10 reports the standard - cannot mount bad option ... blah blah... The kern log reports that the CIFS option "codepage" unknown... changed entry to "unicode" and received the same error message. There are no other error messages or log entries that would indicate another issue, but this is the statement I used for quite awhile with version 12.04 and before. Is the codepage option obsolete in 12.10/CIFS now? Is there a codepage support program that I must load? Is there some kind of helper program that is required to supports the codepage option? A current review of the man pages at samba.org does not make mention of the option "codepage". Extremely confused - any help/insight would be greatly appreciated.

    Read the article

  • Determine which software product a Microsoft Product Key activates

    - by druciferre
    Without a product key being labelled, is there is any way to identify what Microsoft software product a given product key is meant to activate? Let's say for example I had the product key ABCDE-FGHIJ-KLMNO-PQRST-UVWXY, but I had no clue if was meant for Windows 7 Ultimate, Windows 7 Home Premium, Vista Ultimate, or even Office 2010. Does Microsoft (or anyone for that matter) have any kind of tool that I could paste the key into and get a result that identifies the software product the key is meant for (or at least a good estimate)? Note: I have searched and searched many times on the Internet, but the only results I ever find are how to recover a lost product key by using something like Nirsoft ProduKey. This is not what I am looking for.

    Read the article

  • Apache Rewrite Rules breaking each other?

    - by neezer
    I have this rule: RewriteCond %{REQUEST_URI} ^/(manhattan|queens|westchester|new-jersey|bronx|brooklyn)-apartments/.*$ RewriteCond %{REQUEST_URI} !^/guide/(.*)$ RewriteRule ^(.*)$ /home/neezer/public-html/domain.com/guide/$1 [L] Which works great on it's own. Essentially, I have a bunch of directories that have a bunch of files in them that I want to keep in the "/guide" folder, but I want them to appear at the web root for SEO reasons. This rule works, but unfortunately the original URL's still work too (with "/guide"). I want to 301 Redirect the ones with "/guide" in the URL to those without, without actually moving the files on the server. I tried adding this rule: RewriteCond %{REQUEST_URI} ^/guide/(manhattan|queens|westchester|new-jersey|bronx|brooklyn)-apartments/.*$ RewriteRule ^guide/(.*)$ http://www.domain.com/$1 [R=301,L] ... but that breaks my first rule completely. Any thoughts about what I might be doing wrong? Please let me know if you need to know anything else from me to help me with this issue.

    Read the article

  • My KDE very slow in certain operations

    - by Pietro
    I have a problem with my Linux installation. It seems that the KDE code that deals with directory windows is extremely slow (on both Dolphin and Konqueror). This happens both when I click on a directory icon and when I want to open/save a file from many KDE applications. The time the window takes to open can be one minute or more. The same happens when I right click on an icon. Looking at the CPU usage, this is very low (less than 10%). Am I the only one with this problem, or is it well known and maybe already fixed? Consider that I cannot update to a more recent version of OpenSuse. Thank you, Pietro Configuration: Linux version: OpenSuse 11.4 KDE 4.6.0 System: DELL Precision T3500 - Intel Xeon Home directory mounted on a remote drive. <-- could this be the reason?

    Read the article

  • Why is my connection to Playstation Network so unreliable? [closed]

    - by jammus
    Hello friends. I'm 28 and my girlfriend is 24. Our home internet connection is pretty reliable, it's almost always up and can get fairly high download speeds. However, my experience with the Playstation Network is pretty frustrating. I'm always getting kicked off or getting quite high latency. Are there any tips or tricks that you might help my on-line gaming run more smoothly? I'm using a wireless connection for the PS3, is this likely to affect things?

    Read the article

  • De-index URL paremeters

    - by Doug Firr
    Upon reading over this question is lengthy so allow me to provide a one sentence summary: I need to get Google to de-index URLs that have certain parameters appended I have a website example.com with language translations. There used to be many translations but I deleted them all so that only English (Default) and French options remain. When one selects a language option a parameter is aded to the URL. For example, the home page: https://example.com (default) https://example.com/main?l=fr_FR (French) I added a robots.txt to stop Google from crawling any of the language translations: # robots.txt generated at http://www.mcanerin.com User-agent: * Disallow: Disallow: /cgi-bin/ Disallow: /*?l= So any pages containing "?l=" should not be crawled. I checked in GWT using the robots testing tool. It works. But under html improvements the previously crawled language translation URLs remain indexed. The internet says to add a 404 to the header of the removed URLs so the Googles knows to de-index it. I checked to see what my CMS would throw up if I visited one of the URLs that should no longer exist. This URL was listed in GWT under duplicate title tags (One of the reasons I want to scrub up my URLS) https://example.com/reports/view/884?l=vi_VN&l=hy_AM This URL should not exist - I removed the language translations. The page loads when it should not! I played around. I typed example.com?whatever123 It seems that parameters always load as long as everything before the question mark is a real URL. So if Google has indexed all these URLS with parameters how do I remove them? I cannot check if a 404 is being generated because the page always loads because it's a parameter that needs to be de-indexed.

    Read the article

  • How can I make a vpn network login the default behavior for logging into Windows?

    - by Danny
    To login to the machine, I have to login to our domain. When I am at work, the unauthenticated wireless permits access to the domain. However, the internet is not available until I connect via the vpn. From home, I have to connect via the vpn first, then I can login to the domain. I have successfully setup a network logon with the vpn (following the directions found here). And for the most part it works correctly. (There is an issue with logout/login I haven't figured out just yet). As I currently have to Switch User and select the Network Login button, I'd like to know if it is possible to have the network login the default behavior when logging into the system. This is mostly a usability issue than anything else.

    Read the article

  • Will people respect a Masters of Science in IT w/software engineering concentration from RPI?

    - by twneale
    Here's my thing: I got my undergraduate degree in political science, then a law degree. Then I figured out that I love programming and I'm pretty good at it too. It's fun and rewarding enough for me that I'd prefer to do it for a living over almost any form of pure law practice. So I'm looking at getting a masters degree to put some weight behind a possible career switch. If I actually want to develop software (web, in particular), would people in programming circles respect a master's of science in IT? Specifically, consider as an example the MS in IT from Rensselaer Polytechnic Institute (with a concentration in software engineering). Here's the home page: http://www.rpi.edu/IT/graduate/masters_program.html In particular, I mean to draw a contrast between IT as specifically contemplated by the RPI masters program (an interdisciplinary tech/business program) and other MS degrees in computer science or software engineering that focus more on the science and technical aspects. I guess I want to make sure that other programmers would respect my credentials and not consider me as different or underqualified based on the connotations of the phrase "IT". I believe RPI has an unimpeachable reputation for hard science, and the program seems excellent, but it still matters to me how people in industry would perceive it.

    Read the article

  • zeroconf (bonjour/avahi): macs do not see linuxes and vice versa

    - by codesnik
    In my home network I have several OS X boxes and several Ubuntu boxes. each Ubuntu box sees other boxes via zeroconf. I can "ssh ubuntu1.local" and "ping ubuntu1.local" from "ubuntu2.local", but both fail to lookup OSX boxes. and other way around, I can "ssh mini1.local" from "mbair.local". but it doesn't see "ubuntu1.local" why? do ubuntu and osx use different flavours of zeroconf? could be ubuntu, or osx tweaked to use common flavour?

    Read the article

  • At what point would you drop some of your principles of software development for the sake of more money?

    - by MeshMan
    I'd like to throw this question out there to interestingly see where the medium is. I'm going to admit that in my last 12 months, I picked up TDD and a lot of the Agile values in software development. I was so overwhelmed with how much better my development of software became that I would never drop them out of principle. Until...I was offered a contracting role that doubled my take home pay for the year. The company I joined didn't follow any specific methodology, the team hadn't heard of anything like code smells, SOLID, etc., and I certainly wasn't going to get away with spending time doing TDD if the team had never even seen unit testing in practice. Am I a sell out? No, not completely... Code will always been written "cleanly" (as per Uncle Bob's teachings) and the principles of SOLID will always be applied to the code that I write as they are needed. Testing was dropped for me though, the company couldn't afford to have such a unknown handed to the team who quite frankly, even I did create test frameworks, they would never use/maintain the test framework correctly. Using that as an example, what point would you say a developer should never drop his craftsmanship principles for the sake of money/other benefits to them personally? I understand that this can be a very personal opinion on how concerned one is to their own needs, business needs, and the sake of craftsmanship etc. But one can consider that for example testing can be dropped if the company decided they would rather have a test team, than rather understand unit testing in programming, would that be something you could forgive yourself for like I did? So given that there is something you would drop, there usually should be an equal cost in the business that makes up for what you drop - hopefully, unless of course you are pretty much out for lining your own pockets and not community/social collaborating ;). Double your money, go back to RAD? Or walk on, and look for someone doing Agile, and never look back...

    Read the article

  • Is defragging right for me?

    - by blade
    Hi, I am using Hyper-V on my Windows Server 2008 R2 DC x64 machine. I am also using standard SATA drives. I read some threads on here about defraging but could not reach a conclusion about whether or not I should use defragging. Can anyone shed some light on whether this will be right for me? Furthermore, what tool is best? There seems to be 3: http://www.perfectdisk.com/products/business-perfectdisk11-server/key-features http://www.diskeeper.com/diskeeper/home/server-edition.aspx?id=40279&wid=7 http://www.perfectdisk.com/products/business-perfectdisk11-hyper-v/learn-more Anyone have experience with this?

    Read the article

  • How can I join non-consecutive partitions on internal hard disk?

    - by Andy
    I recently installed a new, larger hard disk in my PC at work (the office wouldn't spring for an upgrade for my 75GB disk, so I brought my own 2TB disk in from home). I managed to clone the original drive using CloneZilla, but now I have a 75GB partition on my new drive, followed by a 300MB partition, followed by a 1794.65GB of unallocated space. What I want is to add the unallocated space to the 75GB partition, thereby maximizing my C: drive. However, when I right-click on the C: partition, the option to "Extend Volume" is grayed out. How do I get all my fancy new extra space to be part of my C: drive? I also tried booting with GParted, but I get the same deal - cannot adjust the C: drive because there's no contiguous space.

    Read the article

  • local user cannot access vsftpd server

    - by Zloy Smiertniy
    I'm currently running a vsftpd server and I added the necessary configurations in vsftpd.conf so that local users can use clients like FileZilla to manage their homes in a server. I found out that only users in the sudoers list access without a problem only they can't download the files, but users that are not sudoers cannot even access their homes from a client but they can access by a web browser using the FTP protocol and they can only access their home directories (as intented) Im running a fedora 14 on my server and my vsftpd.conf looks like this: # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to GAMBITA FTP service # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). chroot_local_user=YES chroot_list_enable=YES # (default follows) chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES use_localtime=YES Anyone has an idea of what might be happening? Nothing concerning vsftpd is written in any log

    Read the article

  • javaws crashes, error in ld-linux-x86-64.so.2

    - by user54214
    I am running Ubuntu 11.10 64 bit client as Dom0 and Xen. I am having problems getting java up and running. Java itself seems to work fine, however I get strange errors, for example when I start javaws. I tried different versions and always get the same errors. I tried openjdk 1.6 and 1.7 as well as sunjava6 and 7. I alway get an error in the same lib All other applications are working fine, so it seems ld-linux-x86-64.so.2 is working fine. Any hints what could be wrong? Ubuntu01:~$ javaws # # A fatal error has been detected by the Java Runtime Environment: # # SIGILL (0x4) at pc=0x00007f4e74c5ad10, pid=7974, tid=139974945277696 # # JRE version: 6.0_23-b23 # Java VM: OpenJDK 64-Bit Server VM (20.0-b11 mixed mode linux-amd64 compressedoops) # Derivative: IcedTea6 1.11pre # Distribution: Ubuntu 11.10, package 6b23~pre11-0ubuntu1.11.10.2 # Problematic frame: # C [ld-linux-x86-64.so.2+0x14d10] _dl_make_stack_executable+0x2b70 # # An error report file with more information is saved as: # /home/r/hs_err_pid7974.log # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # Aborted

    Read the article

  • How to retain secondary hard drive mounts at reboot and keep shares?

    - by Tom
    I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

    Read the article

  • Reg Expression htaccess RewriteRule

    - by Rick
    I am new to using regular expressions for rewriting URL's in htaccess I need to redirect mysite.com/123 to mysite.com/, IF cookie named 'ref' is set. my current htaccess is: <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{HTTP_COOKIE} ref=true [NC] RewriteRule ^/([0-9]+)/$ http://www.mysite.com </IfModule> The goal is that when someone enters site with: mysite.com/111(some number) that they are redirected to the home page of the site after the cookie is set. Be nice... I'm new! ;o)

    Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >