Search Results

Search found 23274 results on 931 pages for 'on call'.

Page 467/931 | < Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >

  • delayed job problem in rails.

    - by krunal shah
    My controller data_files_controller.rb def upload_balances DataFile.load_balances(params) end My model data_file.rb def self.load_balances(params) # Pull the file out of the http request, write it to file system name = params['Filename'] directory = "public/uploads" errors_table_name = "snapshot_errors" upload_file = File.join(directory, name) File.open(upload_file, "wb") { |f| f.write(params['Filedata'].read) } # Remove the old data from the table Balance.destroy_all ------ more code----- end It's working fine. Now i want to use delayed job with my controller to call my model action like .. My controller data_files_controller.rb def upload_balances DataFile.send_later(:load_balances,params) end Is it possible?? What's the other way to do it? Is it create any problem? With this send_later i am getting this error in column last_error in delayed_job table. uninitialized stream C:/cyncabc/app/models/data_file.rb:12:in read' C:/cyncabc/app/models/data_file.rb:12:inload_balances' C:/cyncabc/app/models/data_file.rb:12:in open' C:/cyncabc/app/models/data_file.rb:12:inload_balances' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/performable_method.rb:35:in send' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/performable_method.rb:35:inperform' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/backend/base.rb:66:in invoke_job' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:120:inrun' c:/ruby/lib/ruby/1.8/timeout.rb:62:in timeout' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:120:inrun' c:/ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.8/lib/active_support/core_ext/benchmark.rb:10:in realtime' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:119:inrun' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:180:in reserve_and_run_one_job' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:104:inwork_off' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:103:in times' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:103:inwork_off' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:78:in start' c:/ruby/lib/ruby/gems/1.8/gems/activesupport-2.3.8/lib/active_support/core_ext/benchmark.rb:10:inrealtime' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:77:in start' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:74:inloop' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/worker.rb:74:in start' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/command.rb:93:inrun' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/command.rb:72:in run_process' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons/application.rb:215:incall' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons/application.rb:215:in start_proc' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons/application.rb:225:incall' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons/application.rb:225:in start_proc' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons/application.rb:255:instart' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons/controller.rb:72:in run' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons.rb:188:inrun_proc' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons/cmdline.rb:105:in call' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons/cmdline.rb:105:incatch_exceptions' c:/ruby/lib/ruby/gems/1.8/gems/daemons-1.0.10/lib/daemons.rb:187:in run_proc' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/command.rb:71:inrun_process' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/command.rb:65:in daemonize' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/command.rb:63:intimes' c:/ruby/lib/ruby/gems/1.8/gems/delayed_job-2.0.3/lib/delayed/command.rb:63:in `daemonize' script/delayed_job:5 Without send_later it's working fine... Is there any solution?

    Read the article

  • unittest import error with virtualenv + google-app-engine-django

    - by Ray Yun
    I'm working with google-app-engine-django + zipped django. Just running "python manage.py test" succeeded without error. But with virtualenv, test was failed with "import unittest error". same error with Django 1.1. - OSX 10.5.6 - google-app-engine-django (r101 via svn) : r100 was failed with launcher 1.3.0 - GoogleAppLauncher 1.3.0 - Django 1.1 & 1.1.1 (zipped) : both failed - virtualenv 1.4.5 - virtualenvwrapper 1.24 Error Message: (django_appengine)Reiot:warclouds Reiot$ python manage.py test WARNING:root:Could not read datastore data from /var/folders/UZ/UZ1vQeLFH2ShHk4kIiLcFk+++TI/-Tmp-/django_google-app-engine-django.datastore INFO:root:zipimporter('/Volumes/data/Documents/warclouds/django.zip', 'django/core/serializers/') .WARNING:root:Can't open zipfile /Users/Reiot/.virtualenvs/django_appengine/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg: IOError: [Errno 13] file not accessible: '/Users/Reiot/.virtualenvs/django_appengine/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg' WARNING:root:Can't open zipfile /Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c9-py2.5.egg: IOError: [Errno 13] file not accessible: '/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c9-py2.5.egg' ERROR:root:Exception encountered handling request Traceback (most recent call last): File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 3177, in _HandleRequest self._Dispatch(dispatcher, self.rfile, outfile, env_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 3120, in _Dispatch base_env_dict=env_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 515, in Dispatch base_env_dict=base_env_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 2379, in Dispatch self._module_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 2289, in ExecuteCGI reset_modules = exec_script(handler_path, cgi_path, hook) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 2185, in ExecuteOrImportScript exec module_code in script_module.__dict__ File "/Volumes/data/Documents/warclouds/main.py", line 28, in <module> from appengine_django import InstallAppengineHelperForDjango File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1264, in Decorate return func(self, *args, **kwargs) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1914, in load_module return self.FindAndLoadModule(submodule, fullname, search_path) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1264, in Decorate return func(self, *args, **kwargs) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1816, in FindAndLoadModule description) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1264, in Decorate return func(self, *args, **kwargs) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1767, in LoadModuleRestricted description) File "/Volumes/data/Documents/warclouds/appengine_django/__init__.py", line 44, in <module> import unittest ImportError: No module named unittest INFO:root:"GET / HTTP/1.1" 500 - INFO:root:zipimporter('/Users/Reiot/.virtualenvs/django_appengine/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '') INFO:root:zipimporter('/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c9-py2.5.egg', '') F........................................................... ====================================================================== FAIL: a request to the default page works in the dev_appserver ---------------------------------------------------------------------- Traceback (most recent call last): File "/Volumes/data/Documents/warclouds/appengine_django/tests/integration_test.py", line 176, in testBasic self.assertEquals(rv.status_code, 200) AssertionError: 500 != 200 I also tried with console import but it was ok. > which python /Users/Reiot/.virtualenvs/django_appengine/bin/python > python >>> import unittest Here is my environments: $ mkvirtualenv --no-site-packages no-django $ mkvirtualenv --no-site-packages django-1.1 $ mkvirtualenv --no-site-packages django-1.1.1 (django-1.1)$ easy_install Django-1.1.tar (django-1.1.1)$ easy_install Django-1.1.1.tar $ mkdir google-app-engine-django-svn $ cp -r google-app-engine-django-svn google-app-engine-django-svn-django-1.1 // copy appropriate django.zip $ cp -r google-app-engine-django-svn google-app-engine-django-svn-django-1.1.1 // copy appropriate django.zip

    Read the article

  • Paying great programmers more than average programmers

    - by Kelly French
    It's fairly well recognized that some programmers are up to 10 times more productive than others. Joel mentions this topic on his blog. There is a whole blog devoted to the idea of the "10x productive programmer". In years since the original study, the general finding that "There are order-of-magnitude differences among programmers" has been confirmed by many other studies of professional programmers (Curtis 1981, Mills 1983, DeMarco and Lister 1985, Curtis et al. 1986, Card 1987, Boehm and Papaccio 1988, Valett and McGarry 1989, Boehm et al 2000). Fred Brooks mentions the wide range in the quality of designers in his "No Silver Bullet" article, The differences are not minor--they are rather like the differences between Salieri and Mozart. Study after study shows that the very best designers produce structures that are faster, smaller, simpler, cleaner, and produced with less effort. The differences between the great and the average approach an order of magnitude. The study that Brooks cites is: H. Sackman, W.J. Erikson, and E.E. Grant, "Exploratory Experimental Studies Comparing Online and Offline Programming Performance," Communications of the ACM, Vol. 11, No. 1 (January 1968), pp. 3-11. The way programmers are paid by employers these days makes it almost impossible to pay the great programmers a large multiple of what the entry-level salary is. When the starting salary for a just-graduated entry-level programmer, we'll call him Asok (From Dilbert), is $40K, even if the top programmer, we'll call him Linus, makes $120K that is only a multiple of 3. I'd be willing to be that Linus does much more than 3 times what Asok does, so why wouldn't we expect him to get paid more as well? Here is a quote from Stroustrup: "The companies are complaining because they are hurting. They can't produce quality products as cheaply, as reliably, and as quickly as they would like. They correctly see a shortage of good developers as a part of the problem. What they generally don't see is that inserting a good developer into a culture designed to constrain semi-skilled programmers from doing harm is pointless because the rules/culture will constrain the new developer from doing anything significantly new and better." This leads to two questions. I'm excluding self-employed programmers and contractors. If you disagree that's fine but please include your rationale. It might be that the self-employed or contract programmers are where you find the top-10 earners, but please provide a explanation/story/rationale along with any anecdotes. [EDIT] I thought up some other areas in which talent/ability affects pay. Financial traders (commodities, stock, derivatives, etc.) designers (fashion, interior decorators, architects, etc.) professionals (doctor, lawyer, accountant, etc.) sales Questions: Why aren't the top 1% of programmers paid like A-list movie stars? What would the industry be like if we did pay the "Smart and gets things done" programmers 6, 8, or 10 times what an intern makes? [Footnote: I posted this question after submitting it to the Stackoverflow podcast. It was included in episode 77 and I've written more about it as a Codewright's Tale post 'Of Rockstars and Bricklayers'] Epilogue: It's probably unfair to exclude contractors and the self-employed. One aspect of the highest earners in other fields is that they are free-agents. The competition for their skills is what drives up their earning power. This means they can not be interchangeable or otherwise treated as a plug-and-play resource. I liked the example in one answer of a major league baseball team trying to field two first-basemen. Also, something that Joel mentioned in the Stackoverflow podcast (#77). There are natural dynamics to shrink any extreme performance/pay ranges between the highs and lows. One is the peer pressure of organizations to pay within a given range, another is the likelyhood that the high performer will realize their undercompensation and seek greener pastures.

    Read the article

  • Fixing predicated NSFetchedResultsController/NSFetchRequest performance with SQLite backend?

    - by Jaanus
    I have a series of NSFetchedResultsControllers powering some table views, and their performance on device was abysmal, on the order of seconds. Since it all runs on main thread, it's blocking my app at startup, which is not great. I investigated and turns out the predicate is the problem: NSPredicate *somePredicate = [NSPredicate predicateWithFormat:@"ANY somethings == %@", something]; [fetchRequest setPredicate:somePredicate]; I.e the fetch entity, call it "things", has a many-to-many relation with entity "something". This predicate is a filter that limits the results to only things that have a relation with a particular "something". When I removed the predicate for testing, fetch time (the initial performFetch: call) dropped (for some extreme cases) from 4 seconds to around 100ms or less, which is acceptable. I am troubled by this, though, as it negates a lot of the benefit I was hoping to gain with Core Data and NSFRC, which otherwise seems like a powerful tool. So, my question is, how can I optimize this performance? Am I using the predicate wrong? Should I modify the model/schema somehow? And what other ways there are to fix this? Is this kind of degraded performance to be expected? (There are on the order of hundreds of <1KB objects.) EDIT WITH DETAILS: Here's the code: [fetchRequest setFetchLimit:200]; NSLog(@"before fetch"); BOOL success = [frc performFetch:&error]; if (!success) { NSLog(@"Fetch request error: %@", error); } NSLog(@"after fetch"); Updated logs (previously, I had some application inefficiencies degrading the performance here. These are the updated logs that should be as close to optimal as you can get under my current environment): 2010-02-05 12:45:22.138 Special Ppl[429:207] before fetch 2010-02-05 12:45:22.144 Special Ppl[429:207] CoreData: sql: SELECT DISTINCT 0, t0.Z_PK, t0.Z_OPT, <model fields> FROM ZTHING t0 LEFT OUTER JOIN Z_1THINGS t1 ON t0.Z_PK = t1.Z_2THINGS WHERE t1.Z_1SOMETHINGS = ? ORDER BY t0.ZID DESC LIMIT 200 2010-02-05 12:45:22.663 Special Ppl[429:207] CoreData: annotation: sql connection fetch time: 0.5094s 2010-02-05 12:45:22.668 Special Ppl[429:207] CoreData: annotation: total fetch execution time: 0.5240s for 198 rows. 2010-02-05 12:45:22.706 Special Ppl[429:207] after fetch If I do the same fetch without predicate (by commenting out the two lines in the beginning of the question): 2010-02-05 12:44:10.398 Special Ppl[414:207] before fetch 2010-02-05 12:44:10.405 Special Ppl[414:207] CoreData: sql: SELECT 0, t0.Z_PK, t0.Z_OPT, <model fields> FROM ZTHING t0 ORDER BY t0.ZID DESC LIMIT 200 2010-02-05 12:44:10.426 Special Ppl[414:207] CoreData: annotation: sql connection fetch time: 0.0125s 2010-02-05 12:44:10.431 Special Ppl[414:207] CoreData: annotation: total fetch execution time: 0.0262s for 200 rows. 2010-02-05 12:44:10.457 Special Ppl[414:207] after fetch 20-fold difference in times. 500ms is not that great, and there does not seem to be a way to do it in background thread or otherwise optimize that I can think of. (Apart from going to a binary store where this becomes a non-issue, so I might do that. Binary store performance is consistently ~100ms for the above 200-object predicated query.) (I nested another question here previously, which I now moved away).

    Read the article

  • "Content is not allowed in prolog" when parsing perfectly valid XML on GAE

    - by Adrian Petrescu
    Hey guys, I've been beating my head against this absolutely infuriating bug for the last 48 hours, so I thought I'd finally throw in the towel and try asking here before I throw my laptop out the window. I'm trying to parse the response XML from a call I made to AWS SimpleDB. The response is coming back on the wire just fine; for example, it may look like: <?xml version="1.0" encoding="utf-8"?> <ListDomainsResponse xmlns="http://sdb.amazonaws.com/doc/2009-04-15/"> <ListDomainsResult> <DomainName>Audio</DomainName> <DomainName>Course</DomainName> <DomainName>DocumentContents</DomainName> <DomainName>LectureSet</DomainName> <DomainName>MetaData</DomainName> <DomainName>Professors</DomainName> <DomainName>Tag</DomainName> </ListDomainsResult> <ResponseMetadata> <RequestId>42330b4a-e134-6aec-e62a-5869ac2b4575</RequestId> <BoxUsage>0.0000071759</BoxUsage> </ResponseMetadata> </ListDomainsResponse> I pass in this XML to a parser with XMLEventReader eventReader = xmlInputFactory.createXMLEventReader(response.getContent()); and call eventReader.nextEvent(); a bunch of times to get the data I want. Here's the bizarre part -- it works great inside the local server. The response comes in, I parse it, everyone's happy. The problem is that when I deploy the code to Google App Engine, the outgoing request still works, and the response XML seems 100% identical and correct to me, but the response fails to parse with the following exception: com.amazonaws.http.HttpClient handleResponse: Unable to unmarshall response (ParseError at [row,col]:[1,1] Message: Content is not allowed in prolog.): <?xml version="1.0" encoding="utf-8"?> <ListDomainsResponse xmlns="http://sdb.amazonaws.com/doc/2009-04-15/"><ListDomainsResult><DomainName>Audio</DomainName><DomainName>Course</DomainName><DomainName>DocumentContents</DomainName><DomainName>LectureSet</DomainName><DomainName>MetaData</DomainName><DomainName>Professors</DomainName><DomainName>Tag</DomainName></ListDomainsResult><ResponseMetadata><RequestId>42330b4a-e134-6aec-e62a-5869ac2b4575</RequestId><BoxUsage>0.0000071759</BoxUsage></ResponseMetadata></ListDomainsResponse> javax.xml.stream.XMLStreamException: ParseError at [row,col]:[1,1] Message: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next(Unknown Source) at com.sun.xml.internal.stream.XMLEventReaderImpl.nextEvent(Unknown Source) at com.amazonaws.transform.StaxUnmarshallerContext.nextEvent(StaxUnmarshallerContext.java:153) ... (rest of lines omitted) I have double, triple, quadruple checked this XML for 'invisible characters' or non-UTF8 encoded characters, etc. I looked at it byte-by-byte in an array for byte-order-marks or something of that nature. Nothing; it passes every validation test I could throw at it. Even stranger, it happens if I use a Saxon-based parser as well -- but ONLY on GAE, it always works fine in my local environment. It makes it very hard to trace the code for problems when I can only run the debugger on an environment that works perfectly (I haven't found any good way to remotely debug on GAE). Nevertheless, using the primitive means I have, I've tried a million approaches including: XML with and without the prolog With and without newlines With and without the "encoding=" attribute in the prolog Both newline styles With and without the chunking information present in the HTTP stream And I've tried most of these in multiple combinations where it made sense they would interact -- nothing! I'm at my wit's end. Has anyone seen an issue like this before that can hopefully shed some light on it? Thanks!

    Read the article

  • DSOFramer closing Excel doc in another window. If unsaved data in file, dsoframer fails to open with

    - by Steve
    I'm using Microsoft's DSOFramer control to allow me to embed an Excel file in my dialog so the user can choose his sheet, then select his range of cells; it's used with an import button on my dialog. The problem is that when I call the DSOFramer's OPEN function, if I have Excel open in another window, it closes the Excel document (but leaves Excel running). If the document it tries to close has unsaved data, I get a dialog boxclosing Excel doc in another window. If unsaved data in file, dsoframer fails to open with a messagebox: "Attempt to access invalid address". I built the source, and stepped through, and its making a call in its CDsoDocObject::CreateFromFile function, calling BindToObject on an object of class IMoniker. The HR is 0x8001010a "The message filter indicated that the application is busy". On that failure, it tries to InstantiateDocObjectServer by classid of CLSID Microsoft Excel Worksheet... this fails with an HRESULT of 0x80040154 "Class not registered". The InstantiateDocObjectServer just calls CoCreateInstance on the classid, first with CLSCTX_LOCAL_SERVER, then (if that fails) with CLSCTX_INPROC_SERVER. I know DSOFramer is a popular sample project for embedding Office apps in various dialogs and forms. I'm hoping someone else has had this problem and might have some insight on how I can solve this. I really don't want it to close any other open Excel documents, and I really don't want it to error-out if it can't close the document due to unsaved data. Update 1: I've tried changing the classid that's passed in to "Excel.Application" (I know that class will resolve), but that didn't work. In CDsoDocObject, it tries to open key "HKEY_CLASSES_ROOT\CLSID{00024500-0000-0000-C000-000000000046}\DocObject", but fails. I've visually confirmed that the key is not present in my registry; The key is present for the guid, but there's no DocObject subkey. It then produces an error message box: "The associated COM server does not support ActiveX document embedding". I get similar (different key, of course) results when I try to use the Excel.Workbook programid. Update 2: I tried starting a 2nd instance of Excel, hoping that my automation would bind to it (being the most recently invoked) instead of the problem Excel instance, but it didn't seem to do that. Results were the same. My problem seems to have boiled down to this: I'm calling the BindToObject on an object of class IMoniker, and receiving 0x8001010A (RPC_E_SERVERCALL_RETRYLATER) "The message filter indicated that the application is busy". I've tried playing with the flags passed to the BindToObject (via the SetBindOptions), but nothing seems to make any difference. Update 3: It first tries to bind using an IMoniker class. If that fails, it calls CoCreateInstance for the clsid as a "fallback" method. This may work for other MS Office objects, but when it's Excel, the class is for the Worksheet. I modified the sample to CoCreateInstance _Application, then got the workbooks, then called the Workbooks::Open for the target file, which returns a Worksheet object. I then returned that pointer and merged back with the original sample code path. All working now.

    Read the article

  • Inconsistent responses from ISAPI DLL in mod_isapi.

    - by William Leader
    I have a ISAPI dll which I created with Delphi 2009, and I have been able to test that it functions as designed when I run it inside of IIS 5.1. However when I attempt to host the web service from within Apache on Windows XP using mod_isapi, I do not get consistent results. The ISAPI dll implements a very simple SOAP service with two methods. One method is a simple echo service that sends back the string sent to it. The second method is used to send a file to the server using a TSoapAttachement (Mutipart MIME). The interface can be descibes as follows IPdiSvc2 = interface(IInvokable) ['{532DCDD7-D66B-4D2C-924E-2F389D3E0A74}'] function Echo(data:string): string; stdcall; function SendFile(request:TFileDescription; attachment: TSOAPAttachment): TSendFileResponse; stdcall; end; What is interesting is if I only call the echo function Apache handles this without error every time. The webservice only returns an error after calling send File, but not every time. There are three outcomes to calling send file that I have observed: A normal result without an error (HTTP 200 OK). A Soap encoded exception with the message: 'Required white space was missing. Line: 11 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML.' (HTTP 500 Internal Error). This also generates a message in the Apache error.log 'Premature end of script headers: MYISAPI.dll' A Soap encoded exception with the message: 'Access violation at address 01A53D57 in module MYISAPI.dll. Read of address 00000000.' (HTTP 200 OK). What I find interesting is that the second third outcomes still occur if I call echo after calling send file. Calling SendFile, SendFile, SendFile, SendFile results in outcomes 1, 2, 3, 1. Calling Echo, SendFile, SendFile, SendFile results in outcomes 1, 1, 2, 3. Calling SendFile, Echo, Echo, SendFile results in outcomes 1, 2, 3, 1. The pattern I am seing is that after a Successful SendFile, the next to requests result in outcomes 2 and 3 regardless of what those two requests are. My guess is that because Apache uses multiple threads to handle multiple requests that each request is getting handled in a slightly different way, and that the DLL may not have been initialized in the same way for each worker thread. I do not think the problem exists in my code as when I attach the debugger to httpd.exe it does recognize the exceptions but it says the exceptions are in non-delphi code meaning that they are happening before the code inside my DLL has a chance to execute. I suspect it may have something to do with the way I have apache configured. My Apache configuration is the defaults created by the 2.2.15 installer for windows with the following addition: <IfModule isapi_module> AddHandler isapi-handler .dll ISAPILogNotSupported on ISAPIFakeAsync on ISAPIAppendLogToErrors on </IfModule> <IfModule alias_module> ScriptAlias /myisapi/ "C:/path/to/myisapi/" </IfModule> <Directory "C:/path/to/myisapi/"> AllowOverride None Options ExecCGI Order allow,deny Allow from all </Directory>

    Read the article

  • Creating a Reverse Proxy using Jpcap

    - by Ramon Marco Navarro
    I need to create a program that receives HTTP request and forwards those requests to the web servers. I have successfully made this using only Java Sockets but the client needed the program to be implemented in Jpcap. I'd like to know if this is possible and what literature I should be reading for this project. This is what I have now by stitching together pieces from the Jpcap tutorial: import java.net.InetAddress; import java.io.*; import jpcap.*; import jpcap.packet.*; public class Router { public static void main(String args[]) { //Obtain the list of network interfaces NetworkInterface[] devices = JpcapCaptor.getDeviceList(); //for each network interface for (int i = 0; i < devices.length; i++) { //print out its name and description System.out.println(i+": "+devices[i].name + "(" + devices[i].description+")"); //print out its datalink name and description System.out.println(" datalink: "+devices[i].datalink_name + "(" + devices[i].datalink_description+")"); //print out its MAC address System.out.print(" MAC address:"); for (byte b : devices[i].mac_address) System.out.print(Integer.toHexString(b&0xff) + ":"); System.out.println(); //print out its IP address, subnet mask and broadcast address for (NetworkInterfaceAddress a : devices[i].addresses) System.out.println(" address:"+a.address + " " + a.subnet + " "+ a.broadcast); } int index = 1; // set index of the interface that you want to open. //Open an interface with openDevice(NetworkInterface intrface, int snaplen, boolean promics, int to_ms) JpcapCaptor captor = null; try { captor = JpcapCaptor.openDevice(devices[index], 65535, false, 20); captor.setFilter("port 80 and host 192.168.56.1", true); } catch(java.io.IOException e) { System.err.println(e); } //call processPacket() to let Jpcap call PacketPrinter.receivePacket() for every packet capture. captor.loopPacket(-1,new PacketPrinter()); captor.close(); } } class PacketPrinter implements PacketReceiver { //this method is called every time Jpcap captures a packet public void receivePacket(Packet p) { JpcapSender sender = null; try { NetworkInterface[] devices = JpcapCaptor.getDeviceList(); sender = JpcapSender.openDevice(devices[1]); } catch(IOException e) { System.err.println(e); } IPPacket packet = (IPPacket)p; try { // IP Address of machine sending HTTP requests (the client) // It's still on the same LAN as the servers for testing purposes. packet.dst_ip = InetAddress.getByName("192.168.56.2"); } catch(java.net.UnknownHostException e) { System.err.println(e); } //create an Ethernet packet (frame) EthernetPacket ether=new EthernetPacket(); //set frame type as IP ether.frametype=EthernetPacket.ETHERTYPE_IP; //set source and destination MAC addresses // MAC Address of machine running reverse proxy server ether.src_mac = new MacAddress("08:00:27:00:9C:80").getAddress(); // MAC Address of machine running web server ether.dst_mac = new MacAddress("08:00:27:C7:D2:4C").getAddress(); //set the datalink frame of the packet as ether packet.datalink=ether; //send the packet sender.sendPacket(packet); sender.close(); //just print out a captured packet System.out.println(packet); } } Any help would be greatly appreciated. Thank you.

    Read the article

  • War wont deploy "Unresolved <ejb-link>" Glassfish 3, Netbeans 7

    - by Ime Imee
    I have enterprise aplication with ejb and war module, and since I created local interface web module wont deploy. It builds fine. EJB project is referenced inside web project. Also when I delete <ejb-local-ref> from web.xml it deploys, but then lookup method fails. Glassfish error: SEVERE: Exception while deploying the app [Projekat-war] : Error: Unresolved <ejb-link>: Projekat-ejb.jar#ZaWebSessionBean Simple interface: @Local public interface ZaWebSessionBeanLocal { String vrati(String str); } @Stateless public class ZaWebSessionBean implements ZaWebSessionBeanLocal { @Override public String vrati(String str) { return "vrati"; } // Add business logic below. (Right-click in editor and choose // "Insert Code > Add Business Method") } And web.xml <ejb-local-ref> <ejb-ref-name>ZaWebSessionBean</ejb-ref-name> <ejb-ref-type>Session</ejb-ref-type> <local>za_web.ZaWebSessionBeanLocal</local> <ejb-link>Projekat-ejb.jar#ZaWebSessionBean</ejb-link> </ejb-local-ref> Lookup method (generated) : public class HeaderBean { ZaWebSessionBeanLocal zaWebSessionBean = lookupZaWebSessionBeanLocal(); private ZaWebSessionBeanLocal lookupZaWebSessionBeanLocal() { try { Context c = new InitialContext(); return (ZaWebSessionBeanLocal) c.lookup("java:global/Projekat/Projekat-ejb/ZaWebSessionBean!za_web.ZaWebSessionBeanLocal"); } catch (NamingException ne) { Logger.getLogger(getClass().getName()).log(Level.SEVERE, "exception caught", ne); throw new RuntimeException(ne); } } Full log: SEVERE: Exception while deploying the app [Projekat-war] : Error: Unresolved <ejb-link>: Projekat-ejb.jar#ZaWebSessionBean SEVERE: Unresolved <ejb-link>: Projekat-ejb.jar#ZaWebSessionBean SEVERE: Exception while deploying the app [Projekat-war] SEVERE: Error: Unresolved <ejb-link>: Projekat-ejb.jar#ZaWebSessionBean java.lang.RuntimeException: Error: Unresolved <ejb-link>: Projekat-ejb.jar#ZaWebSessionBean at com.sun.enterprise.deployment.util.EjbBundleValidator.accept(EjbBundleValidator.java:724) at com.sun.enterprise.deployment.WebBundleDescriptor.visit(WebBundleDescriptor.java:2004) at com.sun.enterprise.deployment.Application.visit(Application.java:1777) at com.sun.enterprise.deployment.archivist.ApplicationFactory.openArchive(ApplicationFactory.java:195) at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:185) at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:94) at com.sun.enterprise.v3.server.ApplicationLifecycle.loadDeployer(ApplicationLifecycle.java:827) at com.sun.enterprise.v3.server.ApplicationLifecycle.setupContainerInfos(ApplicationLifecycle.java:769) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:368) at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240) at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:389) at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:348) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:363) at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1085) at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:95) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1291) at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1259) at com.sun.enterprise.v3.admin.AdminAdapter.doCommand(AdminAdapter.java:461) at com.sun.enterprise.v3.admin.AdminAdapter.service(AdminAdapter.java:212) at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179) at com.sun.enterprise.v3.server.HK2Dispatcher.dispath(HK2Dispatcher.java:117) at com.sun.enterprise.v3.services.impl.ContainerMapper$Hk2DispatcherCallable.call(ContainerMapper.java:354) at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:195) at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849) at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746) at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045) at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228) at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90) at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79) at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54) at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59) at com.sun.grizzly.ContextTask.run(ContextTask.java:71) at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532) at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513) at java.lang.Thread.run(Thread.java:619) SEVERE: Exception while deploying the app [Projekat-war] : Error: Unresolved <ejb-link>: Projekat-ejb.jar#ZaWebSessionBean

    Read the article

  • How to Zip one IEnumerable with itself

    - by wageoghe
    I am implementing some math algorithms based on lists of points, like Distance, Area, Centroid, etc. Just like in this post: http://stackoverflow.com/questions/2227828/find-the-distance-required-to-navigate-a-list-of-points-using-linq That post describes how to calculate the total distance of a sequence of points (taken in order) by essentially zipping the sequence "with itself", generating the sequence for Zip by offsetting the start position of the original IEnumerable by 1. So, given the Zip extension in .Net 4.0, assuming Point for the point type, and a reasonable Distance formula, you can make calls like this to generate a sequence of distances from one point to the next and then to sum the distances: var distances = points.Zip(points.Skip(1),Distance); double totalDistance = distances.Sum(); Area and Centroid calculations are similar in that they need to iterate over the sequence, processing each pair of points (points[i] and points[i+1]). I thought of making a generic IEnumerable extension suitable for implementing these (and possibly other) algorithms that operate over sequences, taking two items at a time (points[0] and points[1], points[1] and points[2], ..., points[n-1] and points[n] (or is it n-2 and n-1 ...) and applying a function. My generic iterator would have a similar signature to Zip, but it would not receive a second sequence to zip with as it is really just going to zip with itself. My first try looks like this: public static IEnumerable<TResult> ZipMyself<TSequence, TResult>(this IEnumerable<TSequence> seq, Func<TSequence, TSequence, TResult> resultSelector) { return seq.Zip(seq.Skip(1),resultSelector); } With my generic iterator in place, I can write functions like this: public static double Length(this IEnumerable<Point> points) { return points.ZipMyself(Distance).Sum(); } and call it like this: double d = points.Length(); and double GreensTheorem(Point p1, Point p1) { return p1.X * p2.Y - p1.Y * p2.X; } public static double SignedArea(this IEnumerable<Point> points) { return points.ZipMyself(GreensTheorem).Sum() / 2.0 } public static double Area(this IEnumerable<Point> points) { return Math.Abs(points.SignedArea()); } public static bool IsClockwise(this IEnumerable<Point> points) { return SignedArea(points) < 0; } and call them like this: double a = points.Area(); bool isClockwise = points.IsClockwise(); In this case, is there any reason NOT to implement "ZipMyself" in terms of Zip and Skip(1)? Is there already something in LINQ that automates this (zipping a list with itself) - not that it needs to be made that much easier ;-) Also, is there better name for the extension that might reflect that it is a well-known pattern (if, indeed it is a well-known pattern)? Had a link here for a StackOverflow question about area calculation. It is question 2432428. Also had a link to Wikipedia article on Centroid. Just go to Wikipedia and search for Centroid if interested. Just starting out, so don't have enough rep to post more than one link,

    Read the article

  • backtracking in haskell

    - by dmindreader
    I have to traverse a matrix and say how many "characteristic areas" of each type it has. A characteristic area is defined as a zone where elements of value n or n are adjacent. For example, given the matrix: 0 1 2 2 0 1 1 2 0 3 0 0 There's a single characteristic area of type 1 which is equal to the original matrix: 0 1 2 2 0 1 1 2 0 3 0 0 There are two characteristic areas of type 2: 0 0 2 2 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 3 0 0 And one characteristic area of type 3: 0 0 0 0 0 0 0 0 0 3 0 0 So, for the function call: countAreas [[0,1,2,2],[0,1,1,2],[0,3,0,0]] The result should be [1,2,1] I haven't defined countAreas yet, I'm stuck with my visit function when it has no more possible squares in which to move it gets stuck and doesn't make the proper recursive call. I'm new to functional programming and I'm still scratching my head about how to implement a backtracking algorithm here. Take a look at my code, what can I do to change it? move_right :: (Int,Int) -> [[Int]] -> Int -> Bool move_right (i,j) mat cond | (j + 1) < number_of_columns mat && consult (i,j+1) mat /= cond = True | otherwise = False move_left :: (Int,Int) -> [[Int]] -> Int -> Bool move_left (i,j) mat cond | (j - 1) >= 0 && consult (i,j-1) mat /= cond = True | otherwise = False move_up :: (Int,Int) -> [[Int]] -> Int -> Bool move_up (i,j) mat cond | (i - 1) >= 0 && consult (i-1,j) mat /= cond = True | otherwise = False move_down :: (Int,Int) -> [[Int]] -> Int -> Bool move_down (i,j) mat cond | (i + 1) < number_of_rows mat && consult (i+1,j) mat /= cond = True | otherwise = False imp :: (Int,Int) -> Int imp (i,j) = i number_of_rows :: [[Int]] -> Int number_of_rows i = length i number_of_columns :: [[Int]] -> Int number_of_columns (x:xs) = length x consult :: (Int,Int) -> [[Int]] -> Int consult (i,j) l = (l !! i) !! j visited :: (Int,Int) -> [(Int,Int)] -> Bool visited x y = elem x y add :: (Int,Int) -> [(Int,Int)] -> [(Int,Int)] add x y = x:y visit :: (Int,Int) -> [(Int,Int)] -> [[Int]] -> Int -> [(Int,Int)] visit (i,j) vis mat cond | move_right (i,j) mat cond && not (visited (i,j+1) vis) = visit (i,j+1) (add (i,j+1) vis) mat cond | move_down (i,j) mat cond && not (visited (i+1,j) vis) = visit (i+1,j) (add (i+1,j) vis) mat cond | move_left (i,j) mat cond && not (visited (i,j-1) vis) = visit (i,j-1) (add (i,j-1) vis) mat cond | move_up (i,j) mat cond && not (visited (i-1,j) vis) = visit (i-1,j) (add (i-1,j) vis) mat cond | otherwise = vis

    Read the article

  • Calling Grep inside Java gives incorrect results when calling grep in shell gives correct results.

    - by futureelite7
    I've got a problem where calling grep from inside java gives incorrect results, as compared to the results from calling grep on the same file in the shell. My grep command (called both in Java and in bash. I escaped the slash in Java accordingly): /bin/grep -vP --regexp='^[0-9]+\t.*' /usr/local/apache-tomcat-6.0.18/work/Catalina/localhost/saccitic/237482319867147879_1271411421 The command is supposed to match and discard strings like these: 85295371616 Hi Mr Lee, please be informed that... My input file is this: 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85291234783 a3283784428349247233834728482984723333 85219299222 The commands works when I call it from inside bash (Results below): 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85219299222 However, when I call grep again inside java, I get the entire file (Results below): 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85291234783 a3283784428349247233834728482984723333 85219299222 What could be the problem that will cause the grep called by Java to return incorrect results? I tried passing local information via the environment string array in runtime.exec, but nothing seems to change. Am I passing in the locale information incorrectly, or is the problem something else entirely? private String[] localeArray = new String[] { "LANG=", "LC_COLLATE=C", "LC_CTYPE=UTF-8", "LC_MESSAGES=C", "LC_MONETARY=C", "LC_NUMERIC=C", "LC_TIME=C", "LC_ALL=" };

    Read the article

  • How to fix notifyDataSetChanged/ListView problems in dynamic Adapter wrapper Android

    - by ipaterson
    Summary: Trying to dynamically add heading rows to a ListView via a custom adapter wrapper. ListView is having trouble keeping the scroll position in sync. Runnable demo project provided. I would like to dynamically add items to a list based on the values in a CursorAdapter, several positions ahead of what the user is currently viewing. To do this, I have an adapter that wraps the CursorAdapter and keeps the new content indexed in a SparseArray. The ListView needs to be updated when items are added to the custom adapter, but I have met a lot of pitfalls trying to get that to work and would love some advice. The demo project can be downloaded here: http://dl.dropbox.com/u/15334423/DynamicSectionedList.zip In the demo, the headings are added dynamically by looking ahead 10 places to find the correct position where the list items switch to the next letter. Each implementation of notifyDataSetChanged has problems as described: Demo 1 This demo shows the importance of notifyDataSetChanged(). On clicking anything, the app will crash. This is due to some sanity checking in ListView... mItemCount != adapter.getItemCount(). Moral is, we need to notify the list that data has changed. Demo 2 The natural next step is to notify the ListView of changes when changes occur. Unfortunately, doing so while the ListView is scrolling firmly breaks all touch interaction until the app switches out of touch mode. You will need to "fling scroll" far enough to generate new headings in order to notice this. Tapping the screen will not cause the scroll to stop, and once stopped none of the list items will be clickable. This is due to some if (!mDataChanged) { /* do very important stuff */ } code in AbsListView.onTouchEvent(). Demo 3 To fix this, Demo 3 introduces a pendingChanges flag and the custom Adapter gains a notifyDataSetChangedIfNeeded() which can be called by the ListView once it has entered a "safe" state for changes. The first point where changes must be notified is in ListView.layoutChildren(), so I overrode that method to first notify of changes if needed, then call through. Fling past at least one heading then click a list item. This doesn't quite work right, though I'm not totally sure why. Tapping or selecting an item with the keyboard/trackball causes the list to refresh without properly syncing the old position. It scrolls to the top of the list which is not acceptable. Demo 4 The scroll problem in Demo 3 can be conquered, at least in touch mode. By adding a call to notifyDataSetChangedIfNeeded() on touch down, the data change happens to take place at such a time that all touch interaction works as expected and the list position is properly synced. However, I can't find an analog for that when the device is not in touch mode, not to mention the fact that it definitely seems like a hack. The list almost always scrolls back to the top, I can't find out what causes it to occasionally maintain the correct position. Since Android is fighting me at each step of the way, I feel like there should be a better approach. Please try the demo, if any fixes can be applied to get it working that would be great! Many thanks to anyone who can look into this, hopefully if we can get the code working it will be useful for others trying to accomplish the same optimization for lists with headings.

    Read the article

  • Silverlight and PHP nuSOAP communication problem

    - by Ummar
    I am writting a silverlight application in which I want to call the php webservice written using NuSOAP. here is the WSDL of webservice <?xml version="1.0" encoding="ISO-8859-1" ?> - <definitions xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="urn:currencywebservice" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="urn:currencywebservice"> - <types> - <xsd:schema targetNamespace="urn:currencywebservice"> <xsd:import namespace="http://schemas.xmlsoap.org/soap/encoding/" /> <xsd:import namespace="http://schemas.xmlsoap.org/wsdl/" /> </xsd:schema> </types> <message name="GetAllCurrenciesRequest" /> - <message name="GetAllCurrenciesResponse"> <part name="return" type="xsd:string" /> </message> - <portType name="currencywebservicePortType"> - <operation name="GetAllCurrencies"> <documentation>Get all currencies available</documentation> <input message="tns:GetAllCurrenciesRequest" /> <output message="tns:GetAllCurrenciesResponse" /> </operation> </portType> - <binding name="currencywebserviceBinding" type="tns:currencywebservicePortType"> <soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" /> - <operation name="GetAllCurrencies"> <soap:operation soapAction="urn:currencywebservice#GetAllCurrencies" style="rpc" /> - <input> <soap:body use="literal" namespace="urn:currencywebservice" /> </input> - <output> <soap:body use="literal" namespace="urn:currencywebservice" /> </output> </operation> </binding> - <service name="currencywebservice"> - <port name="currencywebservicePort" binding="tns:currencywebserviceBinding"> <soap:address location="http://localhost/extras/currency/currencyservice.php" /> </port> </service> </definitions> When I call the webservice it gives an exception The content type text/html of response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly The php side of service is <?php // Pull in the NuSOAP code require_once('../../lib/tools/nusoap/nusoap.php'); $ns = "urn:currencywebservice"; // Create the server instance $server = new soap_server(); // Initialize WSDL support $server->configureWSDL('currencywebservice', $ns); $server->xml_encoding = "utf-8"; $server->soap_defencoding = "utf-8"; $server->wsdl->schemaTargetNamespace = $ns; $server->register('GetAllCurrencies', array(), array('return' => 'xsd:string'), $ns, $ns."#GetAllCurrencies", 'rpc', 'literal', 'Get all currencies available'); // Define the method as a PHP function function GetAllCurrencies() { return "test return"; } // Use the request to (try to) invoke the service header('Content-Type: text/xml; charset=utf8'); $server->service($HTTP_RAW_POST_DATA); ?> Please help me out what is this problem?

    Read the article

  • Calling Grep inside Java gives incorrect results while calling grep in shell gives correct results.

    - by futureelite7
    I've got a problem where calling grep from inside java gives incorrect results, as compared to the results from calling grep on the same file in the shell. My grep command (called both in Java and in bash. I escaped the slash in Java accordingly): /bin/grep -vP --regexp='^[0-9]+\t.*' /usr/local/apache-tomcat-6.0.18/work/Catalina/localhost/saccitic/237482319867147879_1271411421 Java Code: String filepath = "/path/to/file"; String options = "P"; String grepparams = "^[0-9]+\\t.*"; String greppath = "/bin/"; String[] localeArray = new String[] { "LANG=", "LC_COLLATE=C", "LC_CTYPE=UTF-8", "LC_MESSAGES=C", "LC_MONETARY=C", "LC_NUMERIC=C", "LC_TIME=C", "LC_ALL=" }; options = "v"+options; //Assign optional params if (options.contains("P")) { grepparams = "\'"+grepparams+"\'"; //Quote the regex expression if -P flag is used } else { options = "E"+options; //equivalent to calling egrep } proc = sysRuntime.exec(greppath+"/grep -"+options+" --regexp="+grepparams+" "+filepath, localeArray); System.out.println(greppath+"/grep -"+options+" --regexp="+grepparams+" "+filepath); inStream = proc.getInputStream(); The command is supposed to match and discard strings like these: 85295371616 Hi Mr Lee, please be informed that... My input file is this: 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85291234783 a3283784428349247233834728482984723333 85219299222 The commands works when I call it from inside bash (Results below): 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85219299222 However, when I call grep again inside java, I get the entire file (Results below): 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85aaa234567 Hi Ms Chan, please be informed that... 85292vx5678 Hi Mrs Ng, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 8~!95371616 Hi Mr Lee, please be informed that... 85295371616 Hi Mr Lee, please be informed that... 852&^*&1616 Hi Mr Lee, please be informed that... 8529537Ax16 Hi Mr Lee, please be informed that... 85====ppq16 Hi Mr Lee, please be informed that... 85291234783 a3283784428349247233834728482984723333 85219299222 What could be the problem that will cause the grep called by Java to return incorrect results? I tried passing local information via the environment string array in runtime.exec, but nothing seems to change. Am I passing in the locale information incorrectly, or is the problem something else entirely?

    Read the article

  • Core Data - JSON (TouchJSON) on iPhone

    - by Urizen
    I have the following code which seems to go on indefinitely until the app crashes. It seems to happen with the recursion in the datastructureFromManagedObject method. I suspect that this method: 1) looks at the first managed object and follows any relationship property recursively. 2) examines the object at the other end of the relationship found at point 1 and repeats the process. Is it possible that if managed object A has a to-many relationship with object B and that relationship is two-way (i.e an inverse to-one relationship to A from B - e.g. one department has many employees but each employee has only one department) that the following code gets stuck in infinite recursion as it follows the to-one relationship from object B back to object A and so on. If so, can anyone provide a fix for this so that I can get my whole object graph of managed objects converted to JSON. #import "JSONUtils.h" @implementation JSONUtils - (NSDictionary*)dataStructureFromManagedObject:(NSManagedObject *)managedObject { NSDictionary *attributesByName = [[managedObject entity] attributesByName]; NSDictionary *relationshipsByName = [[managedObject entity] relationshipsByName]; //getting the values correspoinding to the attributes collected in attributesByName NSMutableDictionary *valuesDictionary = [[managedObject dictionaryWithValuesForKeys:[attributesByName allKeys]] mutableCopy]; //sets the name for the entity being encoded to JSON [valuesDictionary setObject:[[managedObject entity] name] forKey:@"ManagedObjectName"]; NSLog(@"+++++++++++++++++> before the for loop"); //looks at each relationship for the given managed object for (NSString *relationshipName in [relationshipsByName allKeys]) { NSLog(@"The relationship name = %@",relationshipName); NSRelationshipDescription *description = [relationshipsByName objectForKey:relationshipName]; if (![description isToMany]) { NSLog(@"The relationship is NOT TO MANY!"); [valuesDictionary setObject:[self dataStructureFromManagedObject:[managedObject valueForKey:relationshipName]] forKey:relationshipName]; continue; } NSSet *relationshipObjects = [managedObject valueForKey:relationshipName]; NSMutableArray *relationshipArray = [[NSMutableArray alloc] init]; for (NSManagedObject *relationshipObject in relationshipObjects) { [relationshipArray addObject:[self dataStructureFromManagedObject:relationshipObject]]; } [valuesDictionary setObject:relationshipArray forKey:relationshipName]; } return [valuesDictionary autorelease]; } - (NSArray*)dataStructuresFromManagedObjects:(NSArray*)managedObjects { NSMutableArray *dataArray = [[NSArray alloc] init]; for (NSManagedObject *managedObject in managedObjects) { [dataArray addObject:[self dataStructureFromManagedObject:managedObject]]; } return [dataArray autorelease]; } //method to call for obtaining JSON structure - i.e. public interface to this class - (NSString*)jsonStructureFromManagedObjects:(NSArray*)managedObjects { NSLog(@"-------------> just before running the recursive method"); NSArray *objectsArray = [self dataStructuresFromManagedObjects:managedObjects]; NSLog(@"-------------> just before running the serialiser"); NSString *jsonString = [[CJSONSerializer serializer] serializeArray:objectsArray]; return jsonString; } - (NSManagedObject*)managedObjectFromStructure:(NSDictionary*)structureDictionary withManagedObjectContext:(NSManagedObjectContext*)moc { NSString *objectName = [structureDictionary objectForKey:@"ManagedObjectName"]; NSManagedObject *managedObject = [NSEntityDescription insertNewObjectForEntityForName:objectName inManagedObjectContext:moc]; [managedObject setValuesForKeysWithDictionary:structureDictionary]; for (NSString *relationshipName in [[[managedObject entity] relationshipsByName] allKeys]) { NSRelationshipDescription *description = [[[managedObject entity]relationshipsByName] objectForKey:relationshipName]; if (![description isToMany]) { NSDictionary *childStructureDictionary = [structureDictionary objectForKey:relationshipName]; NSManagedObject *childObject = [self managedObjectFromStructure:childStructureDictionary withManagedObjectContext:moc]; [managedObject setValue:childObject forKey:relationshipName]; continue; } NSMutableSet *relationshipSet = [managedObject mutableSetValueForKey:relationshipName]; NSArray *relationshipArray = [structureDictionary objectForKey:relationshipName]; for (NSDictionary *childStructureDictionary in relationshipArray) { NSManagedObject *childObject = [self managedObjectFromStructure:childStructureDictionary withManagedObjectContext:moc]; [relationshipSet addObject:childObject]; } } return managedObject; } //method to call for obtaining managed objects from JSON structure - i.e. public interface to this class - (NSArray*)managedObjectsFromJSONStructure:(NSString *)json withManagedObjectContext:(NSManagedObjectContext*)moc { NSError *error = nil; NSArray *structureArray = [[CJSONDeserializer deserializer] deserializeAsArray:[json dataUsingEncoding:NSUTF32BigEndianStringEncoding] error:&error]; NSAssert2(error == nil, @"Failed to deserialize\n%@\n%@", [error localizedDescription], json); NSMutableArray *objectArray = [[NSMutableArray alloc] init]; for (NSDictionary *structureDictionary in structureArray) { [objectArray addObject:[self managedObjectFromStructure:structureDictionary withManagedObjectContext:moc]]; } return [objectArray autorelease]; } @end

    Read the article

  • Connection Reset on MySQL query

    - by sunwukung
    OK, I'm flummoxed. I'm trying to execute a query on a database (locally) and I keep getting a connection reset error. I've been using the method below in a generic DAO class to build a query string and pass to Zend_Db API. public function insert($params) { $loop = false; $keys = $values = ''; foreach($params as $k => $v){ if($loop == true){ $keys .= ','; $values .= ','; } $keys .= $this->db->quoteIdentifier($k); $values .= $this->db->quote($v); $loop = true; } $sql = "INSERT INTO " . $this->table_name . " ($keys) VALUES ($values)"; //formatResult returns an array of info regarding the status and any result sets of the query //I've commented that method call out anyway, so I don't think it's that try { $this->db->query($sql); return $this->formatResult(array( true, 'New record inserted into: '.$this->table_name )); }catch(PDOException $e) { return $this->formatResult($e); } } So far, this has worked fine - the errors have been occurring since we generated new tables to record user input. The insert string looks like this: INSERT INTO tablename(`id`,`title`,`summary`,`description`,`keywords`,`type_id`,`categories`) VALUES ('5539','Sample Title','Sample content',' \'Lorem ipsum dolor sit amet, consectetur adipiscing elit. In et pellentesque mauris. Curabitur hendrerit, leo id ultrices pellentesque, est purus mattis ligula, vitae imperdiet neque ligula bibendum sapien. Curabitur aliquet nisi et odio pharetra tincidunt. Phasellus sed iaculis nisl. Fusce commodo mauris et purus vehicula dictum. Nulla feugiat molestie accumsan. Donec fermentum libero in risus tempus elementum aliquam et magna. Fusce vitae sem metus. Aenean commodo pharetra risus, nec pellentesque augue ullamcorper nec. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nullam vel elit libero. Vestibulum in turpis nunc.\'','this,is,a,sample,array',1,'category title') You'll probably notice the big chunk of whitespace before the Lorem Ipsum string. The description field is being populated from a TinyMCE textarea - I'm guessing it's chucking in some line returns, so I've tried stripping those out. However, even if I disable the TinyMCE field, the reset error still occurs. The next port of call was checking the limits on the table, since it seems to insert if the length of "description" is around the 300 mark (it varies between 310 - 330). The field limit is set to VARCHAR(1500) and the validation on this field won't allow anything past bigger than 1200 with HTML, 800 without. The real kicker is that if I take this sql string and execute it via the command line, it works fine - so I can't for the life of me figure out what's wrong. So, in a nutshell, I'm stumped. Any ideas?

    Read the article

  • how do I access XHR responseBody from Javascript?

    - by Cheeso
    I've got a web page that uses XMLHttpRequest to download a binary resource. Because it's binary I'm trying to use xhr.responseBody to access the bytes. I've seen a few posts suggesting that it's impossible to access the bytes directly from Javascript. This sounds crazy to me. Weirdly, xhr.responseBody is accessible from VBScript, so the suggestion is that I must define a method in VBScript in the webpage, and then call that method from Javascript. See jsdap for one example. var IE_HACK = (/msie/i.test(navigator.userAgent) && !/opera/i.test(navigator.userAgent)); if (IE_HACK) document.write('<script type="text/vbscript">\n\ Function BinaryToArray(Binary)\n\ Dim i\n\ ReDim byteArray(LenB(Binary))\n\ For i = 1 To LenB(Binary)\n\ byteArray(i-1) = AscB(MidB(Binary, i, 1))\n\ Next\n\ BinaryToArray = byteArray\n\ End Function\n\ </script>'); var xml = (window.XMLHttpRequest) ? new XMLHttpRequest() // Mozilla/Safari/IE7+ : (window.ActiveXObject) ? new ActiveXObject("MSXML2.XMLHTTP") // IE6 : null; // Commodore 64? xml.open("GET", url, true); if (xml.overrideMimeType) { xml.overrideMimeType('text/plain; charset=x-user-defined'); } else { xml.setRequestHeader('Accept-Charset', 'x-user-defined'); } xml.onreadystatechange = function() { if (xml.readyState == 4) { if (!binary) { callback(xml.responseText); } else if (IE_HACK) { // call a VBScript method to copy every single byte callback(BinaryToArray(xml.responseBody).toArray()); } else { callback(getBuffer(xml.responseText)); } } }; xml.send(''); Is this really true? The best way? copying every byte? For a large binary stream that's not gonna be very efficient. There is also a possible technique using ADODB.Stream, which is a COM equivalent of a MemoryStream. See here for an example. It does not require VBScript but does require a separate COM object. if (typeof (ActiveXObject) != "undefined" && typeof (httpRequest.responseBody) != "undefined") { // Convert httpRequest.responseBody byte stream to shift_jis encoded string var stream = new ActiveXObject("ADODB.Stream"); stream.Type = 1; // adTypeBinary stream.Open (); stream.Write (httpRequest.responseBody); stream.Position = 0; stream.Type = 1; // adTypeBinary; stream.Read.... /// ???? what here } I don't think that's gonna work - ADODB.Stream is disabled on most machines these days. In The IE8 developer tools - the IE equivalent of Firebug - I can see the responseBody is an array of bytes and I can even see the bytes themselves. The data is right there. I don't understand why I can't get to it. Is it possible for me to read it with responseText? hints? (other than defining a VBScript method)

    Read the article

  • How to get objects to react to touches in Cocos2D?

    - by Wayfarer
    Alright, so I'm starting to learn more about Coco2D, but I'm kinda frusterated. A lot of the tutorials I have found are for outdated versions of the code, so when I look through and see how they do certain things, I can't translate it into my own program, because a lot has changed. With that being said, I am working in the latest version of Coco2d, version 0.99. What I want to do is create a sprite on the screen (Done) and then when I touch that sprite, I can have "something" happen. For now, let's just make an alert go off. Now, I got this code working with the help of a friend. Here is the header file: // When you import this file, you import all the cocos2d classes #import "cocos2d.h" // HelloWorld Layer @interface HelloWorld : CCLayer { CGRect spRect; } // returns a Scene that contains the HelloWorld as the only child +(id) scene; @end And here is the implementation file: // // cocos2d Hello World example // http://www.cocos2d-iphone.org // // Import the interfaces #import "HelloWorldScene.h" #import "CustomCCNode.h" // HelloWorld implementation @implementation HelloWorld +(id) scene { // 'scene' is an autorelease object. CCScene *scene = [CCScene node]; // 'layer' is an autorelease object. HelloWorld *layer = [HelloWorld node]; // add layer as a child to scene [scene addChild: layer]; // return the scene return scene; } // on "init" you need to initialize your instance -(id) init { // always call "super" init // Apple recommends to re-assign "self" with the "super" return value if( (self=[super init] )) { // create and initialize a Label CCLabel* label = [CCLabel labelWithString:@"Hello World" fontName:@"Times New Roman" fontSize:64]; // ask director the the window size CGSize size = [[CCDirector sharedDirector] winSize]; // position the label on the center of the screen label.position = ccp( size.width /2 , size.height/2 ); // add the label as a child to this Layer [self addChild: label]; CCSprite *sp = [CCSprite spriteWithFile:@"test2.png"]; sp.position = ccp(300,200); [self addChild:sp]; float w = [sp contentSize].width; float h = [sp contentSize].height; CGPoint aPoint = CGPointMake([sp position].x - (w/2), [sp position].y - (h/2)); spRect = CGRectMake(aPoint.x, aPoint.y, w, h); CCSprite *sprite2 = [CCSprite spriteWithFile:@"test3.png"]; sprite2.position = ccp(100,100); [self addChild:sprite2]; //[self registerWithTouchDispatcher]; self.isTouchEnabled = YES; } return self; } // on "dealloc" you need to release all your retained objects - (void) dealloc { // in case you have something to dealloc, do it in this method // in this particular example nothing needs to be released. // cocos2d will automatically release all the children (Label) // don't forget to call "super dealloc" [super dealloc]; } - (void)ccTouchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { UITouch *touch = [touches anyObject]; //CGPoint location = [[CCDirector sharedDirector] convertCoordinate:[touch locationInView:touch.view]]; CGPoint location = [touch locationInView:[touch view]]; location = [[CCDirector sharedDirector] convertToGL:location]; if (CGRectContainsPoint(spRect, location)) { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Win" message:@"testing" delegate:nil cancelButtonTitle:@"okay" otherButtonTitles:nil]; [alert show]; [alert release]; NSLog(@"TOUCHES"); } NSLog(@"Touch got"); } However, this only works for 1 object, the sprite which I create the CGRect for. I can't do it for 2 sprites, which I was testing. So my question is this: How can I have all sprites on the screen react to the same event when touched? For my program, the same event needs to be run for all objects of the same type, so that should make it a tad easier. I tried making a subclass of CCNode and over write the method, but that just didn't work at all... so I'm doing something wrong. Help would be appreciated!

    Read the article

  • RegLoadAppKey working fine on 32-bit OS, failing on 64-bit OS, even if both processes are 32-bit

    - by James Manning
    I'm using .NET 4 and the new RegistryKey.FromHandle call so I can take the hKey I get from opening a registry file with RegLoadAppKey and operate on it with the existing managed API. I thought at first it was just a matter of a busted DllImport and my call had an invalid type in the params or a missing MarshalAs or whatever, but looking at other registry functions and their DllImport declarations (for instance, on pinvoke.net), I don't see what else to try (I've had hKey returned as both int and IntPtr, both worked on 32-bit OS and fail on 64-bit OS) I've got it down to as simple a repro case as I can - it just tries to create a 'random' subkey then write a value to it. It works fine on my Win7 x86 box and fails on Win7 x64 and 2008 R2 x64, even when it's still a 32-bit process, even run from a 32-bit cmd prompt. EDIT: It also fails in the same way if it's a 64-bit process. on Win7 x86: INFO: Running as Admin in 32-bit process on 32-bit OS Was able to create Microsoft\Windows\CurrentVersion\RunOnceEx\a95b1bbf-7a04-4707-bcca-6aee6afbfab7 and write a value under it on Win7 x64, as 32-bit: INFO: Running as Admin in 32-bit process on 64-bit OS Unhandled Exception: System.UnauthorizedAccessException: Access to the registry key '\Microsoft\Windows\CurrentVersion\RunOnceEx\ce6d5ff6-c3af-47f7-b3dc-c5a1b9a3cd22' is denied. at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str) at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions) at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey) at LoadAppKeyAndModify.Program.Main(String[] args) on Win7 x64, as 64-bit: INFO: Running as Admin in 64-bit process on 64-bit OS Unhandled Exception: System.UnauthorizedAccessException: Access to the registry key '\Microsoft\Windows\CurrentVersion\RunOnceEx\43bc857d-7d07-499c-8070-574d6732c130' is denied. at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str) at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions) at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck) at LoadAppKeyAndModify.Program.Main(String[] args) source: class Program { static void Main(string[] args) { Console.WriteLine("INFO: Running as {0} in {1}-bit process on {2}-bit OS", new WindowsPrincipal(WindowsIdentity.GetCurrent()).IsInRole(WindowsBuiltInRole.Administrator) ? "Admin" : "Normal User", Environment.Is64BitProcess ? 64 : 32, Environment.Is64BitOperatingSystem ? 64 : 32); if (args.Length != 1) { throw new ApplicationException("Need 1 argument - path to the software hive file on disk"); } string softwareHiveFile = Path.GetFullPath(args[0]); if (File.Exists(softwareHiveFile) == false) { throw new ApplicationException("Specified file does not exist: " + softwareHiveFile); } // pick a random subkey so it doesn't already exist var keyPathToCreate = "Microsoft\\Windows\\CurrentVersion\\RunOnceEx\\" + Guid.NewGuid(); var hKey = RegistryNativeMethods.RegLoadAppKey(softwareHiveFile); using (var safeRegistryHandle = new SafeRegistryHandle(new IntPtr(hKey), true)) using (var appKey = RegistryKey.FromHandle(safeRegistryHandle)) using (var runOnceExKey = appKey.CreateSubKey(keyPathToCreate)) { runOnceExKey.SetValue("foo", "bar"); Console.WriteLine("Was able to create {0} and write a value under it", keyPathToCreate); } } } internal static class RegistryNativeMethods { [Flags] public enum RegSAM { AllAccess = 0x000f003f } private const int REG_PROCESS_APPKEY = 0x00000001; // approximated from pinvoke.net's RegLoadKey and RegOpenKey // NOTE: changed return from long to int so we could do Win32Exception on it [DllImport("advapi32.dll", SetLastError = true)] private static extern int RegLoadAppKey(String hiveFile, out int hKey, RegSAM samDesired, int options, int reserved); public static int RegLoadAppKey(String hiveFile) { int hKey; int rc = RegLoadAppKey(hiveFile, out hKey, RegSAM.AllAccess, REG_PROCESS_APPKEY, 0); if (rc != 0) { throw new Win32Exception(rc, "Failed during RegLoadAppKey of file " + hiveFile); } return hKey; } }

    Read the article

  • how get validation messages from mangomapper using rails console ?

    - by Alex
    Hi, I am basically teaching myself how to use RoR and MongoDB at the same time. I am following the very good book / tutorial : http://railstutorial.org/ I decided to replace Sqlite3 by MongoDB using the mongomapper gem. Everything works out about alright, but I am having some non-blocking little issues that I truly wish I could get rid of. In chapter 6, when working with validation I got 2 issues: - I don't know how to get the validations messages back like with Sqlite3. The "standard" code is: $ rails console --sandbox >> user = User.new(:name => "", :email => "[email protected]") >> user.save => false >> user.valid? => false >> user.errors.full_messages => ["Name can't be blank"] but if I try to do the same with MongoMapper, it throws an error saying that errors is undefined function. So does it mean that this is simply not implemented in mongomapper / mongo driver ? Or is there some other clever way to do this that I could not figure ? Additional, 2 things here: - I following the exemple in the book to the line, so I was expecting to be able to use the console in sandbox mode, but apparently that does not work either: (...)ruby-1.9.2-p136@rails3/gems/railties-3.0.3/lib/rails/console/sandbox.rb:1:in `<top (required)>': uninitialized constant ActiveRecord (NameError) from /Users/Alex/.rvm/gems/ruby-1.9.2-p136@rails3/gems/railties-3.0.3/lib/rails/application.rb:226:in `initialize_console' from /Users/Alex/.rvm/gems/ruby-1.9.2-p136@rails3/gems/railties-3.0.3/lib/rails/application.rb:153:in `load_console' from /Users/Alex/.rvm/gems/ruby-1.9.2-p136@rails3/gems/railties-3.0.3/lib/rails/commands/console.rb:26:in `start' from /Users/Alex/.rvm/gems/ruby-1.9.2-p136@rails3/gems/railties-3.0.3/lib/rails/commands/console.rb:8:in `start' from /Users/Alex/.rvm/gems/ruby-1.9.2-p136@rails3/gems/railties-3.0.3/lib/rails/commands.rb:23:in `<top (required)>' from script/rails:6:in `require' from script/rails:6:in `<main>' Also, in the book they call "user" but I need to call "User" (note the capital U) why is that ? Is it like mangomapper does not follow the Ruby naming convention or something ? And finally, I am trying to validate the field email with a regex as shown in the tutorial. It does not throws any errors at the code, but whenever I try to insert it just won't ever accept it unless I comment out the :format option... class User include MongoMapper::Document key :name, String, :required => true, :length => { :maximum => 50 } key :email, String, :required => true, # :format => { :with => email_regex }, :uniqueness => { :case_sentitive => false} timestamps! end Any advices you can provide on those topics would help me a lot ! Thanks, Alex

    Read the article

  • WCF Service, Java JApplet client, transport error 405

    - by Juan Zamudio
    Hi all, I'm having a problem with a WCF Service and Java Client, I will try to give as much information as i can, thanks for your time. The Endpoint of the server is BasicHttpBinding, I tried hosting the server as a Windows Service and in IIS but nothing changed. The weird thing is that the Client works great if I use a simple class, in the moment I switch the class to an JApplet I get the problem mentioned. I'm using Eclipse as an IDE, I tried Axis and Metro to generate the stub with the same bad results. Here is an example of the Java class where everything is working public class TestSoaMetro { public String TestMethod(){ String result=null; IDigitalSignatureService aa = new DigitalSignatureService().getBasicHttpBindingEndpoint(); try { result= aa.getData("1", "id002962"); } catch (IDigitalSignatureServiceGetDataArgumentExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IDigitalSignatureServiceGetDataInvalidOperationExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } return result; } } Here is the example of the JApplet where I get the error: public class TestSoaMetroApplet extends JApplet { public void init() { Container content = getContentPane(); content.setBackground(Color.white); content.setLayout(new FlowLayout()); String result= this.TestMethod(); JLabel label = new JLabel(result); content.add(label); } public String TestMethod(){ String result=null; IDigitalSignatureService aa = null; try { aa = new DigitalSignatureService().getBasicHttpBindingEndpoint(); result= aa.getData("1", "id002962"); } catch (IDigitalSignatureServiceGetDataArgumentExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IDigitalSignatureServiceGetDataInvalidOperationExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } return result; } } In the moment the Applet loads I get the error, is the exact same call so I don't understand why I get the exception using the Applet. I Also tried to call this from a Silverlight client and I was getting a security exception, this is where I found out about clientaccesspolicy.xml and crossdomain.xml, I added clientaccesspolicy.xml to the service and the Silverlight Client works great, so I decided to try crossdomain.xml and nothing, the Applet still does not work. I will put the stack trace at the end, thanks all for your time. Juan Zamudio javax.xml.ws.WebServiceException: org.apache.axis2.AxisFault: Transport error: 405 Error: Method not allowed at org.apache.axis2.jaxws.ExceptionFactory.createWebServiceException(ExceptionFactory.java:175) at org.apache.axis2.jaxws.ExceptionFactory.makeWebServiceException(ExceptionFactory.java:70) at org.apache.axis2.jaxws.ExceptionFactory.makeWebServiceException(ExceptionFactory.java:128) at org.apache.axis2.jaxws.core.controller.impl.AxisInvocationController.execute(AxisInvocationController.java:559) at org.apache.axis2.jaxws.core.controller.impl.AxisInvocationController.doInvoke(AxisInvocationController.java:118) at org.apache.axis2.jaxws.core.controller.impl.InvocationControllerImpl.invoke(InvocationControllerImpl.java:82) at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.invokeSEIMethod(JAXWSProxyHandler.java:317) at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.invoke(JAXWSProxyHandler.java:159) at $Proxy12.getData(Unknown Source) at TestSoaMetroApplet.TestMethod(TestSoaMetroApplet.java:28) at TestSoaMetroApplet.init(TestSoaMetroApplet.java:19) at sun.applet.AppletPanel.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: org.apache.axis2.AxisFault: Transport error: 405 Error: Method not allowed at org.apache.axis2.transport.http.HTTPSender.handleResponse(HTTPSender.java:295) at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:190) at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75) at org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:389) at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:222) at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:435) at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:402) at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229) at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165) at org.apache.axis2.jaxws.core.controller.impl.AxisInvocationController.execute(AxisInvocationController.java:554) ... 9 more

    Read the article

  • Android using ksoap calling PHP SOAP webservice fails: 'procedure 'CheckLogin' not found

    - by AmazingDreams
    I'm trying to call a PHP SOAP webservice. I know my webservice functions correctly because I use it in a WPF project succesfully. I'm also building an app in android, using the same webservice. The WSDL file can be found here: http://www.wegotcha.nl/servicehandler/service.wsdl This is my code in the android app: String SOAP_ACTION = "http://www.wegotcha.nl/servicehandler/CheckLogin"; String NAMESPACE = "http://www.wegotcha.nl/servicehandler"; String METHOD_NAME = "CheckLogin"; String URL = "http://www.wegotcha.nl/servicehandler/servicehandler.php"; String resultData = ""; SoapSerializationEnvelope soapEnv = new SoapSerializationEnvelope(SoapEnvelope.VER11); SoapObject request = new SoapObject(NAMESPACE, METHOD_NAME); SoapObject UserCredentials = new SoapObject("Types", "UserCredentials6"); UserCredentials.addProperty("mail", params[0]); UserCredentials.addProperty("password", md5(params[1])); request.addSoapObject(UserCredentials); soapEnv.setOutputSoapObject(request); HttpTransportSE http = new HttpTransportSE(URL); http.setXmlVersionTag("<?xml version=\"1.0\" encoding=\"utf-8\"?>"); http.debug = true; try { http.call(SOAP_ACTION, soapEnv); } catch (IOException e) { e.printStackTrace(); } catch (XmlPullParserException e) { e.printStackTrace(); } SoapObject results = null; results = (SoapObject)soapEnv.bodyOut; if(results != null) resultData = results.getProperty(0).toString(); return resultData; Using fiddler I got the following: Android request: <?xml version="1.0" encoding="utf-8"?> <v:Envelope xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns:d="http://www.w3.org/2001/XMLSchema" xmlns:c="http://schemas.xmlsoap.org/soap/encoding/" xmlns:v="http://schemas.xmlsoap.org/soap/envelope/"><v:Header /> <v:Body> <n0:CheckLogin id="o0" c:root="1" xmlns:n0="http://www.wegotcha.nl/servicehandler"> <n1:UserCredentials6 i:type="n1:UserCredentials6" xmlns:n1="Types"> <mail i:type="d:string">myemail</mail> <password i:type="d:string">myhashedpass</password> </n1:UserCredentials6> </n0:CheckLogin> </v:Body> </v:Envelope> Getting the following response: Procedure 'CheckLogin' not present My request produced by my WPF app looks completely different: <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"> <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <UserCredentials6 xmlns="Types"> <mail>mymail</mail> <password>mypassword</password> </UserCredentials6> </s:Body> </s:Envelope> After googling my ass off I was not able to solve this problem by myself. It may be possible there are some weird things in my Java code because I changed a lot since. I hope you guys will be able to help me, thanks. EDIT: My webservice is of document/literal encoding style, after doing some research I found I should be able to use SoepEnvelope Instead of SoapSerializationEnvelope Though when I replace this I get an error before the try cache block, causing my app to crash. Error: 11-04 16:23:26.786: E/AndroidRuntime(26447): Caused by: java.lang.ClassCastException: org.ksoap2.serialization.SoapObject cannot be cast to org.kxml2.kdom.Node Which is caused by these lines: request.addSoapObject(UserCredentials); soapEnv.setOutputSoapObject(request); This may be a solution though, how do I go about this? I found nothing about using a SoapEnvelope instead of a SoapSerializationEnvelope except for this awesome tutorial: http://ksoap.objectweb.org/project/mailingLists/ksoap/msg00849.html

    Read the article

  • Help with SVN+SSH permissions with CentOS/WHM setup

    - by Furiam
    Hi Folks, I'll try my best to explain how I'm trying to set up this system. Imagine a production server running WHM with various sites. We'll call these sites... site1, site2, site2 Now, with the WHM setup, each site has a user/group defined for them, we'll keep these users/groups called site1,site2 for simplicity reasons. Now, updating these sites is accomplished using SVN, and through the use of a post commit script to auto update these sites (With .svn blocked through the apache configuration). There are two regular maintainers of these sites, we'll call them Joe and Bob. Joe and Bob both have commandline access to the server through thier respective limited accounts. So I've done the easy bit, managed to get SVN working with these "maintainers" so that when an SVN commit occurs, the changes are checked out and go live perfectly. Here's the cavet, and ultimately my problem. User permissions. Through my testing of this setup, I've only managed to get it working by giving what is being updated permissions of 777, so that Joe and Bob can both read and write access to webfront directories for each of the sites. So, an example of how it's set up now: Joe and Bob both belong to a group called "Dev". I have the master /svn folders set up for both read and write access to this group, and it works great. Post commit triggers, updates the site, and then sets 777 on each file within the webfront. I then changed this to try and factor in group permission updates, instead of straight 777. Each folder in /home/site1/public_html intially gets given a chmod of 664, and each folder 775 Which looks a little something like this drwxrwxr-x . drwxrwxr-x .. drwxrwxr-x site1 site1 my_test_folder -rw-rw-r-- site1 site1 my_test_file So site1 is sthe owner and group owner of those files and folders. So I then added site1 to Joe and Bobs secondary groups so that the SVN update will correctly allow access to these files. Herein lies the problem now. When I wish to add a file or folder to /home/site1, say Bobs_file, it then looks like this drwxrwxr-x . drwxrwxr-x .. drwxr-xr-x Bob dev bobs_folder drwxrwxr-x site1 site1 my_test_folder -rw-rw-r-- Bob dev bobs_file -rw-rw-r-- site1 site1 my_test_file How can I get it so that with the set of user permissions Bob has available, to change the owner and group owner of that file to reflect "site1" "site1". As Bob belongs to Dev I can set the permissions correctly with CHMOd, but It appears CHGRP is throwing back operation errors. Now this was long winded enough to give an overview of exactly what I'm trying to accomplish, just incase I'm going about this arse-over-tit and there's a far easier solution. Here's my goals 2 people to update multiple user accounts specified given the structure of WHM Trying to maintain master user/group permissions of file and folders to the original user account, and not the account of the updatee. I like the security of SVN+SSH over just SVN. Don't want to run all this over root. I hope this made sense, and thanks in advance :)

    Read the article

  • JPA thinks I'm deleting a detached object

    - by Steve
    So, I've got a DAO that I used to load and save my domain objects using JPA. I finally managed to get the transaction stuff working (with a bunch of help from the folks here...), now I've got another issue. In my test case, I call my DAO to load a domain object with a given id, check that it got loaded and then call the same DAO to delete the object I just loaded. When I do that I get the following: java.lang.IllegalArgumentException: Removing a detached instance mil.navy.ndms.conops.common.model.impl.jpa.Group#10 at org.hibernate.ejb.event.EJB3DeleteEventListener.performDetachedEntityDeletionCheck(EJB3DeleteEventListener.java:45) at org.hibernate.event.def.DefaultDeleteEventListener.onDelete(DefaultDeleteEventListener.java:108) at org.hibernate.event.def.DefaultDeleteEventListener.onDelete(DefaultDeleteEventListener.java:74) at org.hibernate.impl.SessionImpl.fireDelete(SessionImpl.java:794) at org.hibernate.impl.SessionImpl.delete(SessionImpl.java:772) at org.hibernate.ejb.AbstractEntityManagerImpl.remove(AbstractEntityManagerImpl.java:253) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at org.springframework.orm.jpa.SharedEntityManagerCreator$SharedEntityManagerInvocationHandler.invoke(SharedEntityManagerCreator.java:180) at $Proxy27.remove(Unknown Source) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDao.delete(GroupDao.java:499) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:304) at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy28.delete(Unknown Source) at mil.navy.ndms.conops.common.dao.impl.jpa.GroupDaoTest.testGroupDaoSave(GroupDaoTest.java:89) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:600) at junit.framework.TestCase.runTest(TestCase.java:164) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196) Now given that I'm using the same DAO instance, and I've not changed EntityManagers (unless Spring does so without letting me know), how can this be a detached object? My DAO code looks like this: public class GenericJPADao implements IWebDao, IDao, IDaoUtil { private static Logger logger = Logger.getLogger (GenericJPADao.class); protected Class voClass; @PersistenceContext(unitName = "CONOPS_PU") protected EntityManagerFactory emf; @PersistenceContext(unitName = "CONOPS_PU") protected EntityManager em; public GenericJPADao() { super ( ); ParameterizedType genericSuperclass = (ParameterizedType) getClass ( ).getGenericSuperclass ( ); this.voClass = (Class) genericSuperclass.getActualTypeArguments ( )[1]; } ... public void delete (INTFC modelObj, EntityManager em) { em.remove (modelObj); } @SuppressWarnings("unchecked") public INTFC findById (Long id) { return ((INTFC) em.find (voClass, id)); } } The test case code looks like: IGroup loadedGroup = dao.findById (group.getId ( )); assertNotNull (loadedGroup); assertEquals (group.getId ( ), loadedGroup.getId ( )); dao.delete (loadedGroup); // - This generates the above exception loadedGroup = dao.findById (group.getId ( )); assertNull(loadedGroup); Can anyone tell me what I'm doing wrong here? Thanks

    Read the article

< Previous Page | 463 464 465 466 467 468 469 470 471 472 473 474  | Next Page >