Search Results

Search found 7024 results on 281 pages for 'usb modem'.

Page 47/281 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Platform Builder: Disable the USB Driver Dialog

  - by Bruce Eitman

  For a long time, Windows CE developers and users have wanted to disable the USB Driver Dialog that is displayed when an unknown USB device is plugged into the host controller.   Of course the question is always why would you want to do such a thing? The simple answer is that there are USB devices that are needed, like printers, which expose multiple functions to the bus, like scanners and faxes, which no Windows CE driver exists to support.   So the printer quietly loads a driver, but then the other functions cause a dialog to be shown. One solution is to create a USB Class driver that loads by default if no other driver has been loaded. This driver just accepts anything that it sees and then does nothing with it. Starting with the Windows Embedded CE 6.0 R3 March QFE/update, the USB 2.0 driver has a registry value to disable the dialog: [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients]       "DoNotPromptUser"=dword:0   Setting the DoNotPromptUser value to 1 disables the dialog. The default value is zero, so the driver continues to behave in the same way it always did unless you change this registry value.     Copyright © 2010 – Bruce Eitman All Rights Reserved

  Read the article

• Autodetect/mount SDCards and run script for them on Linux

  - by Brendan

  Hey Everyone, I'm currently running SME Server, and need to have a script run upon the attachment of SD Cards to my server. The script itself works fine (it copies the contents of the cards), but the automounting and execution of the script is where I'm having issues. The I have a USB hub consisting of 10 USB ports; that shows up as: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 (The hub is the TERMINUS TECHNOLOGY INC entries) As I cannot plug SD Cards directly into the server; I use a USB to SD card attachement (10 of them) plugged into the hub to read the cards. Upon pluggig the 10 attachments (without cards) into the hub; lsusb yields the following: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 073: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 072: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 071: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 070: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 069: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 068: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 067: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 066: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 065: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 064: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 As you can see, the readers are the "Gensys Logic, Inc" entries. Plugging in an SD card to a reader doesn't affect lsusb (it reads exactly as above), however my system recognises the cards fine; as indicated by dmesg: Attached scsi generic sg11 at scsi54, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 73 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 If I manually mount sdd1 (mount /dev/sdd1 /somedirectory/) this works fine. What I'm really after is a solution that automounts each of the cards as they are inputted into the reader; and executes a script for them (this will involve copying their contents to another directory). My problem is that I don't know how to do this; I don't think udev will work as the USB devices don't change; if I could somehow get udev working with /dev/disk/by-path/ however I think this is doable (it seems to keep constant entries). ls /dev/disk returns: pci-0000:00:1d.7-usb-0:4.1.1.1:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0 pci-0000:0b:01.0-scsi-0:0:1:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0-part2 From above, we can see I have only one card plugged into the reader (pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1). Going mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 Works and places the card under /media/usbdisk/, however: mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 slot1/ doesn't work, and returns "mount: can't get address for /dev/disk/by-path/pci-0000" Any ideas and solutions would be great, I've seen the knowledge of a lot of the guys on here before so I'm hopeful someone can help me out. Thanks

  Read the article

• Thomson TG782T ADSL2+ modem loses network connection

  - by squashbuff

  I am using an ubuntu 10.04 server (running on a Lenovo Thinkpad notebook) as my webserver. It is performing well in terms of handling the traffic etc. However my internet connection is ADSL2+ (using Thomson TG782T modem-router) and if the modem is reset, then my server loses network connection. The networkmanager icon shows a red exclamation mark showing that is has no connection. But as soon as I click on it and tell it to connect to eth0, the connection is back on. It must be something that networkmanager is failing to do and because of this, the reliability of my webserver is suffering. Any advice on how this can be fixed?

  Read the article

• Infrared usb adapter not hot pluggable?

  - by A. Goossens

  For transferring exercise files from my Polar heart rate monitor i use the software Protrainer 5 with an external infrared usb adapter. Using Wine to run Protrainer 5 and some adjustments mentioned here (using irda-utils) i managed to make it work. Well, sort of: every time i want to transfer exercise files and the adapter is not plugged in i have to reboot my laptop with the usb adapter plugged in to make it work. Since i have a laptop it unfortunately is no option to just always leave the adapter in. It seems to me that the usb adapter isn't hot pluggable (which seems odd for a usb device) or there must be another problem. Polar WebLink (other software to transfer exercise files) experiences the same issue. Can anyone help me to fix this problem? Infrared usb adapter: Polar IRDA USB adapter OS: Ubuntu 12.10 (64-bit) Hardware: Lenovo Thinkpad T500

  Read the article

• 12.04 usb install "boot error"

  - by kindahero

  I downloaded 12.04 64bit, I checked with md5. Seems okay. made bootable usb with usb creater. Now if try to boot up from live usb. I just get "boot error". Nothing else. nothing else. googled around. nothing comes out. UPDATE: some additional info. The usb manufacture is sony. it is fat32 partitioned. Most importantly I could install 12.04 on other systems by same usb. Yes, I definitely setup my Bios boot order to look for USB disk first.

  Read the article

• java serial I/O: handling USB serial connection/disconnection in a robust manner

  - by Jason S

  I'm using rxtx for serial I/O handling in Java with an FTDI2232H that provides a USB comm port. It works great, with one exception: if I unplug the USB cable, so that the COM port disappears at runtime, it spews exceptions left and right: java.io.IOException: No error in nativeavailable at gnu.io.RXTXPort.nativeavailable(Native Method) at gnu.io.RXTXPort$SerialInputStream.read(RXTXPort.java:1427) at gnu.io.RXTXPort$SerialInputStream.read(RXTXPort.java:1339) and when I re-plug the cable in again, it does not recover. Is there any way to get rxtx to work properly with USB comm port connection/disconnection? (I've tried to post to the rxtx mailing list but for some strange reason I cannot send messages even though I am subscribed to the list. I've emailed the list admin and have gotten no response.) If not, is there another serial I/O framework that does?

  Read the article

• How to list all attached USB devices in Visual C++

  - by vinzenzweber

  In Short: I need to detect hotplug events of my USB CDC device by PID/VID and get the corresponding virtual COM port which was created by Windows in Visual C++ and in the end create a dll. I have a USB CDC device which I need to be notified of when connected/disconnected on Windows. My approach is to use RegisterDeviceNotification and an "invisible" Window to receive WM_DEVICECHANGE notifications. This part is working so far. Now as far as I found out I need to get the list of USB devices that is plugged, iterate over it and filter out the devices with my PID/VID? I assume that I am then able to get more informations about the device including the COM port? Is the only way to achieve my goal to use SetupDi calls in setupapi.h? Is using WDK / DDK the only way to achieve my goal? As soon as that is working I open-source it on http://github.com/vinzenzweber/USBEventHandler. The Mac version is available already!

  Read the article

• How to create an "hybrid" usb stick?

  - by rdesign

  Hey guys, I was wondering how to make an hybrid usb stick. That means a usb stick that runs under mac and windows and displays specific content. Example: Plug in on win : index.html opens. Mac os X files are invisible. Plug in on mac: indexMac.html opens. Win files are invisible. I know that every usb stick can be read by both platforms. The Apple Mac os X CD is something which inspired me. thanks a lot.

  Read the article

• WinUSB application or User-Mode Driver as a filter driver for USB Analysis/Sniffer/Trending

  - by Robert

  A question to maybe some who have worked extensively with WinUSB APIs or use mode USB drivers - Does anyone know if the WinUSB API or a user mode driver can be used as a passive observer of USB connections, capturing notification of interrupts, control requests, data transfers...etc without interfering with other applications (such as iTunes) which would obviously require concurrent access to the device at the same time my application is monitoring the connection and displaying data on it? Or do you pretty much have to write a kernel-mode filter driver and inject yourself in the USB stack in order to make that happen? In the past, there have been a few credible options (libusb-win32 and usbsnoop to be specific) though both are built around the old DDK, not the Windows Driver Foundation, and are not really supported on a regular basis any more. I'm hesitant to build something significant around them, as a result.

  Read the article

• How to prevent autoplay and run my own app when inserting an USB-Flash drive

  - by Thomas

  when inserting an USB-Flash drive, Windows normally opens the Autoplay dialog that offers to browse the drive or if there are multimedia files it offers to choose an app to open them. We developed a media player that is connected to the USB-Drive and registers itself as Mass Storage Device. What I need is, that when inserting the Player that this Dialog is not shown, but instead my own application is launched. Ideally the application would be on the Flash Drive itself, but as I understood is that Autorun is disabled for USB-Drives. It would be enough if a preinstalled application is launched. I already tried to catch the WM_DRIVE_CHANGE message, but this only works if my application is the top most window, otherwise the Autoplay Dialog is displayed. Best Tom

  Read the article

• Can Visual Studio Express run from USB drive?

  - by system PAUSE

  Using an arbitrary Windows machine (2000/XP or later), I can install Eclipse CDT to a USB drive move that USB drive onto a different Windows machine--one that does not have any form of Eclipse software already installed, and potentially a different version of Windows (but 2000/XP or later) use Eclipse to develop application-level C/C++ programs on that second machine (and that includes using the debugger), running directly from the USB drive without copying anything to C:. I can do all this without having Administrator privileges on either machine. I can do the same with NetBeans, and with several other IDEs that support C/C++ development. Is it possible to do this with any version of Visual Studio Express? If not, can you explain the technical reason(s) this doesn't work?

  Read the article

• Cablemodem frequent connection loss

  - by LVDave

  I have a Linksys BEFCMU10 cablemodem and a WRT54GL router with Tomato 1.27 firmware on Cox cable. My question is this: I get what seems to be random disconnects from the internet, where the cable modem lights are still normal, but I can connect nowhere, either via a url or an ip address. At the same time these disconnects are happening, I can go to the router's Tomato management webpage, and release/renew my external IP address from Cox's DHCP server. I've had Cox look at the signal levels on the cable modem, and they say they look fine. What brings back the modem, for sometimes as long as 17 days, is several power-cycles of the modem. I don't understand the underlying cable modem technology too well, but I do know that if I'm able to release/renew the DHCP-provided WAN address, I'd expect that the cable modem was working ok... Anybody have any ideas??

  Read the article

• Install persistent Ubuntu Lucid Lynx on 16 GB pen Drive.

  - by Shubhkarman

  Hello. I am using Windows XP and I want to install Ubuntu Lucid Lynx on my 16 GB pen drive. I have a live Ubuntu disc. I want my install to be persistent so that whatever changes I make are preserved. I do not want to alter my MBR but I want to able to boot fro my pen drive through BIOS.

  Read the article

• Cannot write, format, nor erase flash drive

  - by Baruch

  I have a 4gig flash drive, which I can read from but not write on, erase, nor format in any computer (tried in 7 different computers including xp, vista, and win7). I want to erase all the data inside because it is useless. Once I erase something, it erases it and gives me an error that it can't find the file. Once I refresh the folder, the file comes back. I tried holding Shift + Del. I also tried to use the command to format it in safe mode, but it says "access denied". I don't have a write protection button or whatever it is on my flash drive. It's just a simple small 4 gig one.

  Read the article

• How to connect a USB GDI printer to Linux over a D-Link print server?

  - by jpe

  The setup is the following: +------------+ +-----------------+ +---------+ | HP LJ P1005|--USB--| D-Link DPR-1020 |---LAN---| PC Linux| +------------+ +-----------------+ + +---------+ | +------------+ +--| PC Windows | +------------+ HP LJ P1005 is one of those GDI printers that requires the printer driver to do most of the work for it and therefore is a bit "special". D-Link DPR-1020 is a print server with an Ethernet and an USB port that actually supports printing to challenged (read GDI) printers using a utility called PS-Link. What the utility does is basically mirror a USB port over the network to the print server so that the printer driver and the printer both are happy to talk to each other. The PC-s are notebooks that come and go, i.e. are not there all the time. Is there an equivalent of the D-Link PS-Link utility for Linux that could mirror a USB port over the network for a Linux host? And can the solution be used with D-Link DPR-1020? If not then I basically wasted the money buying the print server because the goal was to share a small printer among a couple of users with diverse operating systems in an office. The print server specs say that it supports Linux and LJ P1005, but the Catch 22 appears to be the solution used for GDI printers... It should be noted that it is possible to print from Linux to LJ P1005 directly over USB. This far sharing involved reconnecting the USB cable to appropriate computer to print. Now one of the desks is separated, so the cable does not work. Searching the net did not yield anything useful. Please do not suggest solutions involving a Windows machine (either virtual or not), my question is whether a solution only involving a Linux machine exists.

  Read the article

• Which Cardbus/PCMCIA -> USB card works with external hard drive?

  - by Carl

  I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

  Read the article

• Need recommendation: which USB card (PCMCIA) works with external hard drive?

  - by Carl

  I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

  Read the article

• Two Way Sync of folder on PC to USB Thumb Drive over the internet.

  - by Tim Santeford

  Before flagging as duplicate please note that other similar posts do not have the same criteria below. Thanks Im looking for an app that will let me automatically sync a usb drive with a folder on my home system over the internet. I would like to roam from computer to computer and run this syncing app from the usb drive. Im looking for the same functionally as DropBox but without the 2gb restriction and without the need to fully install. Two Way sync between a usb drive and pc over the net Utilizes the full size of the usb drive not limited by an online storage size. (I dont need online backup or versioning) Allows the removal of the usb drive, Plugging it in to another computer will resume its sync. While the drive is connected the app should run silently keeping changed files in sync. (I dont want to run a manual process other than simply starting the app) Must be able to run as a portable app from the usb drive but can fully install on home pc. Window 7 Support is preferable. Please let me know if such and awesome app exists. TIA!

  Read the article

• Which would be more reliable for data archival - SD card or a generic USB thumbdrive?

  - by Visitor

  I've been thinking lately what should I preferably use for data storage and archival. I will say in advance that I do not use flash memory as the only storage media - I also keep my data on the hard drives and optical disks - flash memory is but one of the several backup solutions that duplicate each other. For the flash memory however I do have a choice - to use a generic USB thumbdrive or a SD card. Are there any indications that SD cards may be better and more reliable? From browsing people's review on the web I see that many complaints about USB sticks have to do with them completely failing, losing file system and stop being recognized by the OS. At the same time, most of the complaints for SD cards deal with just write speeds not holding up to the promise - failure reports are but a portions of those for the USB sticks. Are SD cards indeed more reliable? Am I also correct in my assumptions that SD cards use higher grade NAND chips than USB thumbdrives? At least, for class 10 cards, because the specification dictates the minimum performance and the manufacturers have to preselect better chips. While it is common for USB sticks to promise high speeds "up to XX MB/sec" but the reality is they very often deliver speeds 2-3 times less than promised. Do SD cards get better NAND chips and USB thumbdrives receive the discarded chips? Any thoughts would be appreciated.

  Read the article

• How to share an USB device(scanner) over network (from Win to Ubuntu)?

  - by B. Roland

  Hi! I have a special thing: I want to share my scanner over the network. The scanner is connected to a Win7 machine, but I want to use it from Ubuntu 10.04... I found some methods: USB over Network - it can handle Linux Windows; and Windows Windows it has Windows (and Win CE) & Linux server, but it has only Windows client, their Linux client is coming soon - that's a drag :( - it is not free, but what uses Windows, what is free? USBip - to Linux Linux, it is free, and nice I'm looking for the other way, what can handle Win Linux thing... I prefer free things, but that thing is maybe not free...

  Read the article

• What programming Language Would you learn to Re-engineer USB Devices? [closed]

  - by user70113

  Currently Work in IT support and am retraining in electrical engineering / electronics, I am also interested in Reverse Engineering which language would be best for Hardware RE, I have seen a few sources say C, C++ and Python? I am not familiar with Linux, but installed Ubuntu to learn with. I am not a programmer. Far from it. But, I can understand enough basic VB,Java and PHP to edit it for simple things. One of my immediate projects would be to learn to reverse engineer USB devices and write my own low level drivers. I know there are porting kits, but I really want to know it from the ground up. Thanks for any advise folks Most Appreciated.

  Read the article

• my LaCie 500 Gb not mounted on 11.10

  - by pooo

  My external USB drive was recognized with 10.x versions of Ubuntu but since 11.x I am getting stuck, I had tried everything I read in forums but still the same error: 4956.401052] usb 2-1.4: new high speed USB device number 14 using ehci_hcd [ 4956.539216] scsi14 : uas [ 4956.740955] scsi 14:0:0:0: Direct-Access LaCie Rugged FW USB3 1081 PQ: 0 ANSI: 4 [ 4963.256055] scsi 14:0:0:0: uas_eh_abort_handler tag 0 [ 4963.256076] scsi 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4963.256085] scsi 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4963.256091] scsi 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4963.328122] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4963.468743] scsi 14:0:0:0: Device offlined - not ready after error recovery [ 4963.468813] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.468831] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.469204] scsi 14:0:0:1: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [ 4963.512104] sd 14:0:0:0: Attached scsi generic sg3 type 0 [ 4994.253779] sd 14:0:0:0: uas_eh_abort_handler tag 0 [ 4994.253802] sd 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4994.253809] sd 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4994.253815] sd 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4994.325880] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4994.466488] sd 14:0:0:0: Device offlined - not ready after error recovery [ 4994.466555] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466573] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466582] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466588] sd 14:0:0:0: [sdc] READ CAPACITY failed [ 4994.466593] sd 14:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 4994.466600] sd 14:0:0:0: [sdc] Sense not available. [ 4994.466608] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466616] sd 14:0:0:0: [sdc] Write Protect is off [ 4994.466622] sd 14:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 4994.466629] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466635] sd 14:0:0:0: [sdc] Asking for cache data failed [ 4994.466640] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 4994.467003] sd 14:0:0:0: [sdc] Attached SCSI disk if I am trying on an old ubuntu, the drive is mounted,

  Read the article

• How do I get my ART USB Dual Pre preamp to work?

  - by Zach

  I am using Audacity. I have an ART USB Dual Pre preamp. Ubuntu is not recognizing it whatsoever. I am able to record in Audacity, but it is using the mic that is built into my computer (which is a compaq Presario CQ50) instead of the one plugged into the preamp. How do I get Ubuntu to recognize the preamp that is plugged into my computer? Something tells me it has to do with the installation of the preamp software. It came with a installation CD, but when I go to "install", the nothing happens. I can view what is on the CD, but there is no installing of anything. Please help!

  Read the article

• gsm-ussd gives device busy or error (100)

  - by mydoghasworms

  I am using gsm-ussd to try and query my data balance from my 3G modem. When I issue the commands gsm-ussd -m /dev/ttyUSB0 '*188#' or gsm-ussd -m /dev/ttyUSB2 '*188#' I get either "Device or resource busy" (when it is in used and connected) or "Unknown error (100)". My device (Huawei E173) seems to create 3 devices in /dev, namely ttyUSB0, ttyUSB1 and ttyUSB2. None of them work, and ttyUSB1 gives a somewhat different problem, as it just give the following message: * Wrong modem device (use -m <dev>)? * Modem broken (no reaction to AT)

  Read the article

• Why Are Dial-up Modems so Noisy?

  - by Jason Fitzpatrick

  Throughout the 1990s the majority of internet users began their session with the noisy handshake of a dial-up modem, but what exactly was all that electronic chatter about? Read on as we investigate one of the more iconic sounds of the burgeoning Internet age. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. While dial-up modem use might be down from the nearly 100% market saturation in the 1990s to only 10% of current US internet users, the sound of a dial-up modem connecting lives on in the memories of geeks everywhere. This week we’re taking a look at the technology behind the noisy process and what exactly was going on when you dialed in for your internet session. Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >