Search Results

Search found 21456 results on 859 pages for 'video memory'.

Page 47/859 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Video quality too bad while playing (any) videos in Intel GM965/GL960 Integrated Graphics Controller Ubuntu 12.04

  - by Sukhdev

  I have searched blogs and forums, installed several drivers, but can't find a solution that can provide equivalent video quality as that of Windows 7. Kindly help. Video quality specially color is too bad while playing with any media player. Configuration details are: Ubuntu - 12.04 Intel Corporation Mobile GM965/GL960 Integrated The results of the following commands are a) sudo lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) b) find /dev -group video /dev/fb0 /dev/dri/card0 /dev/dri/controlD64 /dev/agpgart c) glxinfo | grep -i vendor server glx vendor string: SGI client glx vendor string: ATI OpenGL vendor string: Tungsten Graphics, Inc d) sudo lshw -C video *-display:0 description: VGA compatible controller product: Mobile GM965/GL960 Integrated Graphics Controller (primary) vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 0c width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:fea00000-feafffff memory:e0000000-efffffff ioport:efe8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile GM965/GL960 Integrated Graphics Controller (secondary) vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 0c width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:feb00000-febfffff I have spent days installing various drivers, and then un-installing but can't come up with a solution. Please help.

  Read the article

• Memory Troubles with UIImagePicker

  - by Dan Ray

  I'm building an app that has several different sections to it, all of which are pretty image-heavy. It ties in with my client's website and they're a "high-design" type outfit. One piece of the app is images uploaded from the camera or the library, and a tableview that shows a grid of thumbnails. Pretty reliably, when I'm dealing with the camera version of UIImagePickerControl, I get hit for low memory. If I bounce around that part of the app for a while, I occasionally and non-repeatably crash with "status:10 (SIGBUS)" in the debugger. On low memory warning, my root view controller for that aspect of the app goes to my data management singleton, cruises through the arrays of cached data, and kills the biggest piece, the image associated with each entry. Thusly: - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Low Memory Warning" message:@"Cleaning out events data" delegate:nil cancelButtonTitle:@"All right then." otherButtonTitles:nil]; [alert show]; [alert release]; NSInteger spaceSaved; DataManager *data = [DataManager sharedDataManager]; for (Event *event in data.eventList) { spaceSaved += [(NSData *)UIImagePNGRepresentation(event.image) length]; event.image = nil; spaceSaved -= [(NSData *)UIImagePNGRepresentation(event.image) length]; } NSString *titleString = [NSString stringWithFormat:@"Saved %d on event images", spaceSaved]; for (WondrMark *mark in data.wondrMarks) { spaceSaved += [(NSData *)UIImagePNGRepresentation(mark.image) length]; mark.image = nil; spaceSaved -= [(NSData *)UIImagePNGRepresentation(mark.image) length]; } NSString *messageString = [NSString stringWithFormat:@"And total %d on event and mark images", spaceSaved]; NSLog(@"%@ - %@", titleString, messageString); // Relinquish ownership any cached data, images, etc that aren't in use. } As you can see, I'm making a (poor) attempt to eyeball the memory space I'm freeing up. I know it's not telling me about the actual memory footprint of the UIImages themselves, but it gives me SOME numbers at least, so I can see that SOMETHING'S happening. (Sorry for the hamfisted way I build that NSLog message too--I was going to fire another UIAlertView, but realized it'd be more useful to log it.) Pretty reliably, after toodling around in the image portion of the app for a while, I'll pull up the camera interface and get the low memory UIAlertView like three or four times in quick succession. Here's the NSLog output from the last time I saw it: 2010-05-27 08:55:02.659 EverWondr[7974:207] Saved 109591 on event images - And total 1419756 on event and mark images wait_fences: failed to receive reply: 10004003 2010-05-27 08:55:08.759 EverWondr[7974:207] Saved 4 on event images - And total 392695 on event and mark images 2010-05-27 08:55:14.865 EverWondr[7974:207] Saved 4 on event images - And total 873419 on event and mark images 2010-05-27 08:55:14.969 EverWondr[7974:207] Saved 4 on event images - And total 4 on event and mark images 2010-05-27 08:55:15.064 EverWondr[7974:207] Saved 4 on event images - And total 4 on event and mark images And then pretty soon after that we get our SIGBUS exit. So that's the situation. Now my specific questions: THE time I see this happening is when the UIPickerView's camera iris shuts. I click the button to take the picture, it does the "click" animation, and Instruments shows my memory footprint going from about 10mb to about 25mb, and sitting there until the image is delivered to my UIViewController, where usage drops back to 10 or 11mb again. If we make it through that without a memory warning, we're golden, but most likely we don't. Anything I can do to make that not be so expensive? Second, I have NSZombies enabled. Am I understanding correctly that that's actually preventing memory from being freed? Am I subjecting my app to an unfair test environment? Third, is there some way to programmatically get my memory usage? Or at least the usage for a UIImage object? I've scoured the docs and don't see anything about that.

  Read the article

• WmiPrvSE memory leak on Windows 2008 *R2*

  - by MichaelGG

  I've seen references on Windows 2008 to WmiPrvSE leaks, but nothing about Windows 2008 R2. We're running R2 on top of Hyper-V (2008). We are also running NSClient++ for monitoring from opsview. Over time, WmiPrvSE.exe starts to use a lot of memory, causing memory alert issues (less than 10% free). VM has 2GB, WmiPrvSE consumes up to 500-600MB before I kill it. Killing the process doesn't seem to have any negative effect; it starts up again and I haven't noticed any problems. But after a day or two, it's back in the same situation. Any ideas on what to do? Resource Monitor doesn't show any Disk or Network IO by WmiPrvSE.exe. Just slowly climbing private memory... Edited to add: We aren't running clustering, or Windows System Resource Manager. The only regular WMI user I can guess is NSClient++, but we don't seem to have this problem on other servers.

  Read the article

• Throttling Postfix memory

  - by teddybeard

  I have a VPS on 1and1 similar to this configuration (512MB, burst up to 2GB). I run a web service where I crawl the web and notify my users through email and sms when a certain online data feed changes. When I send the emails out, I just have PHP loop through the recipients list and send the emails out using the mail() function. Whenever I try to send a large volume of these messages out, my server starts acting funny. I can't even run an 'ls' sometimes because the shell tells me it 'cannot allocate memory'. The shell is unusable and yet my website is being served up fine. Mail.err contains: Nov 14 17:30:09 s15351477 postfix/smtp[26000]: fatal: inet_addr_local[getifaddrs]: getifaddrs: Cannot allocate memory Nov 14 17:30:09 s15351477 postfix/sendmail[25999]: fatal: username(1000): unable to execute /usr/sbin/postdrop -r: Success Nov 14 18:29:14 s15351477 postfix/smtp[9911]: fatal: inet_addr_local[getifaddrs]: getifaddrs: Cannot allocate memory Nov 14 18:29:14 s15351477 postfix/sendmail[9910]: fatal: username(1000): unable to execute /usr/sbin/postdrop -r: Success Also, if relevant, my bean counters are: Version: 2.5 uid resource held maxheld barrier limit failcnt 53907331: kmemsize 20779422 21041560 31457280 34603008 2989403 lockedpages 0 0 512 512 0 privvmpages 81488 82498 524288 576716 94640 shmpages 2831 2831 32768 32768 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numproc 90 91 128 128 6603 physpages 32692 33531 2147483647 2147483647 0 vmguarpages 0 0 131072 2147483647 0 oomguarpages 32942 33781 9223372036854775807 2147483647 0 numtcpsock 22 23 720 720 0 numflock 27 28 376 413 0 numpty 1 1 32 32 0 numsiginfo 0 1 512 512 0 tcpsndbuf 425888 441064 3440640 5406720 0 tcprcvbuf 369200 376832 3440640 5406720 0 othersockbuf 268000 268464 2252160 4194304 0 dgramrcvbuf 0 8472 524288 576716 0 numothersock 180 182 720 720 0 dcachesize 952146 966231 5242880 5767168 0 numfile 3609 3683 8192 8192 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 25 25 200 205 0 Is there some way I can throttle postfix to keep it from swamping the system like this? Also wondering: why does email use so many resources, these emails are just short text?

  Read the article

• Good PC-based video conference control tools?

  - by Jeremy Wadhams

  I'm looking to improve the user experience in our video conference rooms, by simplifying the things users do all the time (setting up a call, muting and unmuting, panning and zooming between a few room-appropriate presets) and totally taking away the functions that we don't use or that are more likely to ruin the experience (changing the brightness of the TV, using the VNC presenter mode). The rooms each have Tandberg Edge or MXP video units, I'm not looking at PC-based solutions like Skype or iChat. The classic way to do this would be to plunk down huge money for an AMX or Crestron panel. This does have some advantages, and I am considering that approach, but in my initial investigation, that looks expensive, inflexible, and proprietary. On the other hand, the Tandberg video units I'm looking to control are very thorough XML API (PDF), so some of the integration magic that Crestron and AMX consider to be a value add, I could reproduce at mashup speeds. Anyone aware of an Open Source or Commercial product that takes advantage of the readily available web APIs, some simple touch screen PCs, and builds a product that is more like skinning an AJAX web app, and ideally more cost effective than the proprietary panels?

  Read the article

• Fliping the video stream in Sony Vegas Studio!

  - by NoCanDo

  How do I flip a video stream, making it effectively appear to run backwards. For example, I've got a 6 second video stream. I cut it at 2, 4, 6, so I've got now 3 seperate streams with 2 seconds each. 1-2 ; 3-4; 5-6 - That how it'll be displayed normal. Now what I want to do in Sony Vegas is to copy/paste and flip a selected stream. Let say: 1-2; 3-4; 3'-4' (copy/pasted); 5-6 - Now I've got a video stream with 8 seconds. Now I want to flip this copy pasted making it effectively run backwards. 1-2; 3-4; 4'-3'; 5-6. The idea is I want something like a movie, it goes, and goes and goes, then a text appears "WAIT! What just happend?", then the movie goes back to second 3 (1-2-3-4-'WAIT, WHAT JUST HAPPEND?'-4-3-4-5-6. I hope you get what I want to do in Sony Vegas.

  Read the article

• 1GB cached memory - Do I need more RAM?

  - by Martin

  The server runs well but I wonder if I should get more RAM. I only have a few MB of "free" memory and 1.2GB of "cached" memory: free: total used free shared buffers cached Mem: 3945 3893 51 0 28 1216 -/+ buffers/cache: 2648 1296 Swap: 3895 857 3038 I learned that cached memory is used while it's free and not. Is the cached value an indicator for the need of more RAM? cat /proc/meminfo 1 day after flushing the cache: MemTotal: 4040048 kB MemFree: 32844 kB Buffers: 18956 kB Cached: 1249092 kB SwapCached: 161576 kB Active: 3611328 kB Inactive: 189104 kB SwapTotal: 3989496 kB SwapFree: 2894200 kB Dirty: 20520 kB Writeback: 0 kB AnonPages: 2523496 kB Mapped: 217744 kB Slab: 70940 kB SReclaimable: 36756 kB SUnreclaim: 34184 kB PageTables: 99648 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 6009520 kB Committed_AS: 6401716 kB VmallocTotal: 34359738367 kB VmallocUsed: 18852 kB VmallocChunk: 34359719439 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB top: top - 17:20:10 up 112 days, 3:06, 1 user, load average: 1.01, 1.62, 1.48 Tasks: 208 total, 1 running, 207 sleeping, 0 stopped, 0 zombie Cpu(s): 0.6%us, 0.6%sy, 0.0%ni, 97.5%id, 1.3%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 4040048k total, 3953108k used, 86940k free, 16348k buffers Swap: 3989496k total, 1095712k used, 2893784k free, 1235436k cached

  Read the article

• SLI Video Cards

  - by Scott

  I'm configuring a new desktop. I'm looking through all PCI Express 2.0 x16 video cards on NewEgg at the moment. All cards seem to be stating that they have SLI Support or CrossFireX support. I know that these 2 technologies enable you to connect more than one video card together to create more of a powerful video experience. These cards that have this support seem to be more expensive that other cards though. When I did a NewEgg search for cards that did NOT have these two supports, no matches came up for PCI Express 2.0 x16 (haven't checked other interfaces yet though). Can you run an SLI/CrossFireX card as a single card (and if you can is it efficient or even good?), or do you need to have more than one card to run them? Also, do they make cards without these two technologies anymore, and are they even cheaper at this point? I really have no need for SLI/CrossFireX at all, so I was wondering what I should look into. Do cards without this technology not run on the PCI Express 2.0 x16 interface? Thanks ahead of time for all your help.

  Read the article

• SLI Video Cards

  - by Scott

  I'm configuring a new desktop. I'm looking through all PCI Express 2.0 x16 video cards on NewEgg at the moment. All cards seem to be stating that they have SLI Support or CrossFireX support. I know that these 2 technologies enable you to connect more than one video card together to create more of a powerful video experience. These cards that have this support seem to be more expensive that other cards though. When I did a NewEgg search for cards that did NOT have these two supports, no matches came up for PCI Express 2.0 x16 (haven't checked other interfaces yet though). Can you run an SLI/CrossFireX card as a single card (and if you can is it efficient or even good?), or do you need to have more than one card to run them? Also, do they make cards without these two technologies anymore, and are they even cheaper at this point? I really have no need for SLI/CrossFireX at all, so I was wondering what I should look into. Do cards without this technology not run on the PCI Express 2.0 x16 interface? Thanks ahead of time for all your help.

  Read the article

• Libvirt / QEmu Machine Fails and Refuses Restart Because of Memory Allocation Errors

  - by Elmar Weber

  I'm having a problem with libvirt. On a system restart all virtual machines (VMs) are started without a problem and keep running. Then at some point in time a set of machines shuts down according to their log. When I try to restart the machine, I'm getting an error that the memory allocation failed, although more than enough memory is free. server ~ # free total used free shared buffers cached Mem: 16176648 16025476 151172 0 285432 950300 -/+ buffers/cache: 14789744 1386904 Swap: 0 0 0 server ~ # virsh start zimbra error: Failed to start domain zimbra error: Unable to read from monitor: Connection reset by peer server ~ # tail -n 4 /var/log/libvirt/qemu/zimbra.log LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 3072 -smp 2,sockets=2,cores=1,threads=1 -name zimbra -uuid d05ddb7a-83c4-a77b-d8bc-a322648520cf -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/zimbra.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/zimbra.img,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -netdev tap,fd=19,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:21:a9:ad,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 192.168.1.2:25 -k de -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/2 Failed to allocate 3221225472 B: Cannot allocate memory 2012-07-06 08:42:56.076+0000: shutting down server ~ # uname -a Linux server 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux The system is a Ubuntu 12.04 server. The problem seems to occurs since the last restart, which was due to a number of package upgrades and a kernel upgrade. I tried booting with the previous kernel, the problem persists. I was not able to pinpoint an exact event when the machines fail, they do it at nearly the same time. The last time a duplicity job was running, this was not always the case however. Any suggestions on how to debug this? Best regards, elm

  Read the article

• Best video codec to store my own collection

  - by Jack

  Hello! I think this question has already been asked but with different flavours. My problem resised in the fact that my camera (Canon G9) creates video with almost raw codec (I think it's plain old MPEG) so a 10 minutes video is almost 900mb. I would like to convert them in a format that has a good trade-off between space and quality, but I would prefer having the quality as good as the original (of course this is not possible because of lossy compression) just saving as much space is possible with a minimal lose of quality. Which codec should I look for? H264? It seems to be the champion of the moment.. otherwise which other ones could I try? XviD? Which parameters should I use? I mean how many kbits/s is a fair good bitrate to keep high quality? And what about audio codec? video specs are 640x480 at 30fps or 1024x768 at 15fps.. thanks in advance!

  Read the article

• Regular expression to match one of two video ID's in a Google Video URL

  - by Baldur

  I need to grab the video ID from a Google Video URL. There are two different types of URLs that I need to be able to match: http://video.google.com/videoplay?docid=-3498228245415745977# where I need to be able to match -3498228245415745977 (note the dash; -), and video.google.com/videoplay?docid=-3498228245415745977#docid=2728972720932273543 where I need to match 2728972720932273543. Is there any good regular expression that can match this? This is what I've got so far: @"docid=(-?\d{19}+)" since the video ID seems to be 19 characters except when it's prefixed with the dash. I'm using C# (of which I have very little experience) if that changes anything. P.s. I would also appreciate you review my regular expressions for YouTube (@"[\?&]v=([^&#])";), RedTube (@"/(\d{1,6})") and Vimeo (@"/(\d*)"). I do not expect users to enter the full URL and thus do not match the ^http://\\.?sitename+\\.\\w{2,3}.

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

• Reduce "Metafile" memory usage?

  - by Jay Conrod

  My work computer (Windows 7 64-bit) spends a lot of time swapping memory when I switch between programs. This surprises me since I have 4 GB of RAM, and the programs I use aren't particularly RAM hungry (Outlook, Emacs, p4win, Firefox, various build tools). I downloaded RAMMap, and it shows over a gigabyte of memory used by "Metafile". From the Sysinternals blog: Metafile is part of the system cache and consists of NTFS metadata. NTFS metadata includes the MFT as well as the other various NTFS metadata files. ... In the MFT each file attribute record takes 1k and each file has at least one attribute record. Add to this the other NTFS metadata files and you can see why the Metafile category can grow quite large on servers with lots of files. So I understand what the "Metafile" data is... I work on large builds comprising hundreds of thousands of files (none are that big, but they add up to several gigabytes). My question is how can I reduce the amount of memory used by "Metafile"? I'm not actively using all those files at once, so why does Windows need to keep info in RAM? Restarting my machine every time I sync a new build is really annoying.

  Read the article

• Linux virtualization choices with graphic acceleration / video card support

  - by Urbn

  I am in the process of building a new desktop machine for work and fun. I am looking to run a undecided flavor of Linux (guessing Ubuntu) as my primary OS and several Windows installs with a Windows 7 install for .net development and gaming as virtualized environments. From my previous experiences with virtualization software in Linux I was never able to find an application that offered descent video card support / graphic acceleration etc. to be capable of playing any games within one of the virtualized environments. And since I will be investing quite a bit of money into this system for gaming I would naturally want to find the best option available to achieve this setup. So Onto my question: Is there any virtualization software available for Linux that has full video card support, graphic acceleration and capable of taking advantage of everything the video cards have to offer within the virtualized environments? Or am I stuck with running Windows 7 as my primary OS and using virtualization for Linux and the other OS's? Also I have no preference on open/closed source and price range would be up to $175.00 to support at least 3 virtualized environments.

  Read the article

• How to create video file from DVD

  - by pkaeding

  I want to take the DVD video slideshow that I got from my wedding photographer, and put the video on youtube (I have permission, I made sure to get the non-exclusive rights to use anything she created while working for me in any way I wanted when we working out the terms before-hand). Can anyone suggest the best way to get a video file that can be uploaded to YouTube from this DVD? The source DVD is not encrypted, so I don't need to worry about that. I am using a Mac, so Mac-friendly suggestions are preferred. Thanks! EDIT: So, I tried Handbrake, and it looks very promising. However, When I select the title in Handbrake, it says it is about 12 minutes long. The resulting file ends up only being about 4 minutes long, and the music is messed up. It seems to be going normally through the photo transitions, but removing the time that the slideshow stays on each photo. I believe the DVD was created using iDVD. Does it do anything weird to save space by varying hte framerate, or anything like that? Are there special settings in Handbrake I need to use?

  Read the article

• Upgrading memory in a laptop

  - by ulidtko

  I'm a bit confused about all the memory types and various bus frequencies of modern consumer PCs. Requesting expert help on the subject. So far I'm confident that: I have an Asus X51L laptop with an unknown set of configuration options. The CPU in there supports PAE, so I still have a chance to extend the memory beyond 3GiB; and the upper limit of the system is 8GiB. (?) The laptop has two SODIMM slots, one of which is occupied by a 2GiB bank, and the other one is empty. dmidecode and lshw tools consistently state 533 Mhz frequency of the bank. The last one confuses me the most. I failed to find out characteristics of the northbridge in this laptop, and still can't figure out what DDR2 to seek for. Is it DDR2-1066? Or, rather, PC2-8500/PC2-8600? Wouldn't a DDR2-800 bank harm the system's performance? Which kind of modules should I look up in stores? Update: I have bought a 2 GiB DDR2-800 SODIMM, and it seams that the system can't handle 4 GiB of memory. When installed by itself in either slot, both new and old bank (which btw happens to be marked GDDR2-677) work just perfectly; i.e. any configuration resulting in 2 GiB works. When both banks are installed though (totalling in 4 GiB), the memcheck86 tool produces horrible artifacts and crashes, and system reboots; an Ubuntu system can be started and even logged into a Unity session, but the system reboots too in this case from even a minor RAM load. So it's pretty obvious to me now that this laptop doesn't support 4 GiB of RAM or more.

  Read the article

• Android playing Video data from a custom network stream?

  - by Cinar

  Does Android MediaPlayer can only work with file sources? I would like play media (video) from a network stream, but the stream comes in a non-standard protocol, so I have to somehow feed Android MediaPlayer with the data only. Is there anyway to do that? I found a few web pages suggesting using a temporary file for the buffered media data etc. but I would like to minimize the I/O usage as much as I can, so I'm looking for a API only solution if there is any? how about JNI? but looks like the permissions going to be an issue with that also.

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

• Which tool should I use for finding out my memory allocation in Perl?

  - by Colin Newell

  I've slurped in a big file using File::Slurp but given the size of the file I can see that I must have it in memory twice or perhaps it's getting inflated by being turned into 16 bit unicode. How can I best diagnose that sort of a problem in Perl? The file I pulled in is 800mb in size and my perl process that's analysing that data has roughly 1.6gb allocated at runtime. I realise that I may be wrong about my reason for the problem but I'm not sure the most efficient way to prove/disprove my theory.

  Read the article

• reaching constant video bitrate by using ffmpeg

  - by sebastian

  We use ffmpeg and a transcoding script for transcoding and want to make some batch files which we can use for transcoding. For example I use a parameter called video_kbit and if I am writing in 30000 it should reach 30 Mbit. Of course if I use 6000 as parameter it should reach 6 MBit as well, so I have one script which reaches every video bitrate I want. As my settings are now, I only reach 18.1 Mbit. Only when I use 15000 as a parameter I am reaching my goal for a constant video bitrate of 15 MBit. If I use 8000 as parameter I get 10.1 MBit as a result. So under 15000, I get a higher bitrate and over 15000, I get a lower bitrate than I want. My presettings are: ffmpeg -threads "4" -i "$2" -f mp4 -c:v libx264 -crf 1 \ -bufsize 30000k -maxrate ${FC_PARAM_video_kbit}k \ -acodec libfaac -ac 2 -ab ${FC_PARAM_audio_kbit}k -ar 44100 \ -pix_fmt yuv420p -vf scale=${FC_PARAM_width}:${FC_PARAM_height} -y "$3" And I am using these parameters: FC_PARAM_video_kbit = 30000 FC_PARAM_audio_kbit = 192 FC_PARAM_width = 1920 FC_PARAM_height = 1080 I have tried using a higher bufsize and using profile:v and level settings, but nothing got me near the constant video bitrate of 30000 Mbit. Do you guys have any ideas or suggestions for a better way to reach my goal?

  Read the article

• How can I avoid causing memory leaks in Firefox?

  - by mrdanimal

  It seems that there is a lot of information on memory leaks in IE and how web developers can avoid them, but I can't find much on avoiding leaks in FF. I've found lots of random tips on how end users can tweak their preferences, or tips for extension developers, but little on what I can do as a web developer to make sure my pages don't leak. Am I missing something? It seems lazy to just blame it on the user and say "you've got too many extensions". Or are the major patterns the same as in IE -- circular references and all that? Also, if anyone knows of any tools to troubleshoot leaks in FF, that would be great. I found this: https://addons.mozilla.org/en-US/firefox/addon/2490/ But it's apparently just for chrome and extension development.

  Read the article

• java memory allocation under linux

  - by pstanton

  I'm running 4 java processes with the following command: java -Xmx256m -jar ... and the system has 8Gb memory under fedora 12. however it is apparently going into swap. how can that be if 4 x 256m = 1Gb ? EDIT: also, how can all 8Gb of memory be used with so little memory allocated to basically the only thing running? is it java not garbage collecting because the OS tells it it doesn't need to or what? TOP: top - 20:13:57 up 3:55, 6 users, load average: 1.99, 2.54, 2.67 Tasks: 251 total, 6 running, 245 sleeping, 0 stopped, 0 zombie Cpu(s): 50.1%us, 2.9%sy, 0.0%ni, 45.1%id, 1.1%wa, 0.0%hi, 0.8%si, 0.0%st Mem: 8252304k total, 8195552k used, 56752k free, 34356k buffers Swap: 10354680k total, 74044k used, 10280636k free, 6624148k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1948 xxxxxxxx 20 0 1624m 240m 4020 S 96.8 3.0 164:33.75 java 1927 xxxxxxxx 20 0 139m 31m 27m R 91.8 0.4 38:34.55 postgres 1929 xxxxxxxx 20 0 1624m 200m 3984 S 86.2 2.5 183:24.88 java 1969 xxxxxxxx 20 0 1624m 292m 3984 S 65.6 3.6 154:06.76 java 1987 xxxxxxxx 20 0 137m 29m 27m R 28.5 0.4 75:49.82 postgres 1581 root 20 0 159m 18m 4712 S 22.5 0.2 52:42.54 Xorg 2411 xxxxxxxx 20 0 309m 9748 4544 S 20.9 0.1 45:05.08 gnome-system-mo 1947 xxxxxxxx 20 0 137m 28m 27m S 13.3 0.4 44:46.04 postgres 1772 xxxxxxxx 20 0 135m 25m 25m S 4.0 0.3 1:09.14 postgres 1966 xxxxxxxx 20 0 137m 29m 27m S 3.0 0.4 64:27.09 postgres 1773 xxxxxxxx 20 0 135m 732 624 S 1.0 0.0 0:24.86 postgres 2464 xxxxxxxx 20 0 15028 1156 744 R 0.7 0.0 0:49.14 top 344 root 15 -5 0 0 0 S 0.3 0.0 0:02.26 kdmflush 1 root 20 0 4124 620 524 S 0.0 0.0 0:00.88 init 2 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/0 4 root 15 -5 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0

  Read the article

• Which to use - "operator new" or "operator new[]" - to allocate a block of raw memory in C++?

  - by sharptooth

  My C++ program needs a block of uninitialized memory. In C I would use malloc() and later free(). In C++ I can either call ::operator new or ::operator new[] and ::operator delete or operator delete[] respectively later. Looks like both ::operator new and ::operator new[] have exactly the same signature and exactly the same behavior. The same for ::operator delete and ::operator delete[]. The only thing I shouldn't do is pairing operator new with operator delete[] and vice versa - undefined behavior. Other than that which pair do I choose and why?

  Read the article

• How can I tell what is using the memory when there is a heap overflow in Java?

  - by Grae

  Hi all, I know a little about profiling, but what I am particularlly insterest in, is what has all the memory when I get these heap over flow exceptions. I will start getting them after about a hour of debugging. I am hoping there is some sort of dump or something, that I can use to get a list of what instances are around at the time the program starts. By the way, sorry if this is a lazy question. I really shoud put sometime in learning about profiling. Grae

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >