Search Results

Search found 9989 results on 400 pages for 'grails controller'.

Page 48/400 | < Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Sonicwall VPN, Domain Controller Issues

  - by durilai

  I am trying to get the domain logon script to execute when I connect to VPN. I have a SonicWall 4060PRO, with the SonicOS Enhanced 4.2.0.0-10e. The VPN connects successfully, but the script does not execute. I am posting the log below, but I see two issues. The first is the inability to connect to domain. 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX NetGetDCName failed: Could not find domain controller for this domain. The second is the failure of the script. 2009/12/18 19:49:53:466 Warning XXX.XXX.XXX.XXX Failed to execute script file \DT-WIN7netlogondomain.bat, Last Error: The network name cannot be found.. I assume the second issue is caused because of the first, also on the second issue it seems to be trying to get the logon script from my local PC, not the server. Finally, the DC can be pinged and reached by its computer name once the VPN is connected. The shares that the script is tring to map can be mapped manually. Any help is appreciated. 2009/12/18 19:49:31:063 Information The connection "GroupVPN_0006B1030980" has been enabled. 2009/12/18 19:49:32:223 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 1 negotiation. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX Starting aggressive mode phase 1 exchange. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX NAT Detected: Local host is behind a NAT device. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX The SA lifetime for phase 1 is 28800 seconds. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX Phase 1 has completed. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX Received XAuth request. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX XAuth has requested a username but one has not yet been specified. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX Sending phase 1 delete. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX User authentication information is needed to complete the connection. 2009/12/18 19:49:32:393 Information An incoming ISAKMP packet from XXX.XXX.XXX.XXX was ignored. 2009/12/18 19:49:36:962 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 1 negotiation. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX Starting aggressive mode phase 1 exchange. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX NAT Detected: Local host is behind a NAT device. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX The SA lifetime for phase 1 is 28800 seconds. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX Phase 1 has completed. 2009/12/18 19:49:37:094 Information XXX.XXX.XXX.XXX Received XAuth request. 2009/12/18 19:49:37:100 Information XXX.XXX.XXX.XXX Sending XAuth reply. 2009/12/18 19:49:37:110 Information XXX.XXX.XXX.XXX Received initial contact notify. 2009/12/18 19:49:37:153 Information XXX.XXX.XXX.XXX Received XAuth status. 2009/12/18 19:49:37:154 Information XXX.XXX.XXX.XXX Sending XAuth acknowledgement. 2009/12/18 19:49:37:154 Information XXX.XXX.XXX.XXX User authentication has succeeded. 2009/12/18 19:49:37:247 Information XXX.XXX.XXX.XXX Received request for policy version. 2009/12/18 19:49:37:253 Information XXX.XXX.XXX.XXX Sending policy version reply. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX Received policy change is not required. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX Sending policy acknowledgement. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX The configuration for the connection is up to date. 2009/12/18 19:49:37:377 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 2 negotiation with 10.10.10.0/255.255.255.0:BOOTPC:BOOTPS:UDP. 2009/12/18 19:49:37:377 Information XXX.XXX.XXX.XXX Starting quick mode phase 2 exchange. 2009/12/18 19:49:37:472 Information XXX.XXX.XXX.XXX The SA lifetime for phase 2 is 28800 seconds. 2009/12/18 19:49:37:472 Information XXX.XXX.XXX.XXX Phase 2 with 10.10.10.0/255.255.255.0:BOOTPC:BOOTPS:UDP has completed. 2009/12/18 19:49:37:896 Information Renewing IP address for the virtual interface (00-60-73-4C-3F-45). 2009/12/18 19:49:40:189 Information The virtual interface has been added to the system with IP address 10.10.10.112. 2009/12/18 19:49:40:319 Information The system ARP cache has been flushed. 2009/12/18 19:49:40:576 Information XXX.XXX.XXX.XXX NetWkstaUserGetInfo returned: user: Dustin, logon domain: DT-WIN7, logon server: DT-WIN7 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX NetGetDCName failed: Could not find domain controller for this domain. 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX calling NetUserGetInfo: Server: , User: Dustin, level: 3 2009/12/18 19:49:53:460 Information XXX.XXX.XXX.XXX NetUserGetInfo returned: home dir: , remote dir: , logon script: 2009/12/18 19:49:53:466 Warning XXX.XXX.XXX.XXX Failed to execute script file \DT-WIN7netlogondomain.bat, Last Error: The network name cannot be found..

  Read the article

• PERC H710 mini raid controller advanced settings (BIOS)

  - by gregg

  I upgraded from a PERC h310 to an H710 controller on my Dell R620 but didnt get any increase in performance. This is a ESXi host with a 5 disk RAID 5. I noticed when going to the RAID BIOS that the advanced settings section was not activated/checked off. In that section is the strip element size: 64kb (default) read policy: no read ahead and the write policy: write-through. Will checking that section do any harm to the existing raid array or will it simply enable those policies and hopefully boost performance? Or, lastly, is it already using those policies and the checkmark is simply to activate them for changes

  Read the article

• hp ProLiant DL380 G6 server error code: 347 of array controller

  - by alhaythum

  I have got a bran new hp ProLiant DL380 G6 server with embedded smart array P410i controller, I got 164 GB SATA drives and wanted to change them with 300 GB SATA drives before installation. Now, we replace the drives and begin the configuration with the hp DVD and begin; when we reach the point that we want to save the configurations, an error message appears: "The operation has failed with an unknown error, please restart the application and attempt the operation again" When using Rescan System, this error message appears: "Status Alerts - Smart Array P410i in Embedded Slot Warning Status Message Code Description 347 The cache for Smart Array P410i Embedded Slot is not configured" We return back to the 164 GB SATA drives and the message just keeps appearing again. Any help please.

  Read the article

• Server 2012 AD-DS Setup Fails (Microsoft.Directory.Services.Deployment.DeepTasks.DeepTasks not found)

  - by Daniel Steiner

  Good Morning everyone, I am currently trying to promote my 2012 Server to a Domain Controller but when I am at the first step in the setup I get the Error Message (German, Original Message): [Bereitstellungskonfiguration] Fehler bei der Bestimmung, ob der Zielserver bereits ein Domänencontroller ist: Der Typ [Microsoft.Directory.Services.Deployment.DeepTasks.DeepTasks] wurde nicht gefunden: Vergewissern Sie sich, dass die Assembly, die diesen Typ enthält, geladen ist. (Translated to English): Error while determining, if the Targetserver already is a Domain Controller: The Type [Microsoft.Directory.Services.Deployment.DeepTasks.DeepTasks] was not found: Make sure, that the assembly, that contains this type, is loaded. Thus I can neither Configure the AD-DS nor deinstall them via Server Manager. Any Help how to fix that problem would be greatly appricieated.

  Read the article

• Revocation status of DC can't be verified

  - by DotGeorge

  A Domain Controller within my forest was working fine (as the story usually goes). Then, suddenly, I can't logon with my smart card. Instead, I'm greeted with the following message: The system could not log you on. The revocation status of the domain controller certificate used for smart card authentication could not be determined. I literally have no idea what's happened here. As an attempted quick fix, I removed the root certificate which issued the Smart Card's certificate from the CA of both the client and DC. Then imported a newly exported one from the DC in question. Same issue. I've spotted a number of related articles on Microsoft's forums and a HP support document. Each don't really shed much light as it's a generic error message apparently. Having said all of this, other smart cards (issued from other DCs) work fine. So I have no idea what's up with this one.

  Read the article

• Snow Leopard Compatible Drivers for Moschip MCS7720 USB-to-Serial Controller

  - by Kristopher Johnson

  We are using Cables Unlimited USB-2925 USB-to-Dual-DB9 serial cables, which use the Moschip MCS7720 controller. We have downloaded the newest driver from http://www.moschip.com/mcs7720.php, but that driver was last updated in 2005. It does not seem to be working with Macs running OS X 10.6 Snow Leopard. We have sent emails to the support addresses for both Cables Unlimited and Moschip. Cables Unlimited says they are checking with Moschip. No responses from Moschip yet. Does anyone know of any updates for this driver, or are there any ways to get the driver to work with Snow Leopard?

  Read the article

• No sound on Debian unstable Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller

  - by Dave Roger

  I have no sound on my Debian unstable. # cat /etc/issue Debian GNU/Linux squeeze/sid # lspci |grep -i audio 00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02) # lsmod | grep -i snd snd_hda_codec_realtek 235506 1 snd_hda_intel 19907 0 snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4400 0 snd_rawmidi 15515 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event snd_timer 15582 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq snd 46446 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 4598 1 snd snd_page_alloc 6249 2 snd_hda_intel,snd_pcm # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.21. # uname -r 2.6.32-5-amd64

  Read the article

• Monitor LSI 3ware raid controller on ESXi

  - by aseq

  This concerns a server that runs ESXi (v. 4.x or 5.x) installed on drives that are configured into a raid10 using an LSI 3ware 97050 raid controller. I would like to know if there is a way to monitor the LSI 3ware series of controllers, in particular the 9750, through ESXi. And to hopefully also run the monitoring daemon LSI provides. I know you can set up a cronjob to execute tw_cli through ssh on the ESXi server. However that's not really ideal. I am not using vcenter by the way. It would be nice to have more than just monitoring working, since the 3ware software has a very useful web client, besides tw_cli.

  Read the article

• eSATA hotswap using Jmicron JMB363 controller

  - by Stephen

  I have tried both IDE and AHCI modes in the BIOS. Also tried many different driver revisions. I can't seem to hot swap an external SATA drive. I can use the wizard to safely remove it, but reconnecting doesn't do anything unless I reboot. I use a thermaltake dock, and I would like to swap in my backup drive sometimes to do images (they take all day over USB). I can reboot, but I'd like to use hot swap. The controller is a Jmicron JMB363. I'm using the latest BIOS on my motherboard, as well.

  Read the article

• RAID1 Hard drives with Intel Controller

  - by Dave_H

  I have an older server with 2 35GB hard drives arranged as a RAID-1 drive. I have 3 open bays, I'd like to add 2 more hard drives to the open bays and have all 4 drives configured as a RAID-1 drive that Windows sees as 1 larger drive. Is this possible? If not, the new drives are 2x as big as the old drives, is it possible to replace 1 of the old drives and rebuild then replace the second drive and rebuild and somehow expand the array to use all of the available space? The server is using an Intel hardware raid controller, the software interface is Intel Storage Console v2.12.

  Read the article

• Cannot create a new domain in an existing active directory forest

  - by Mackenzie Carr

  I have a domain controller setup on Windows Server 2008 R2 (Forest) and I have another Windows Server 2008 R2 (New Domain) and I want to create a new domain in an existing forest. I get the following error: An Active Directory domain controller for the domain mackdev.mackenziecarr.com could not be contacted The error was "no records found for the given DNS query" The query was for the SRV record for: _ldap._tcp.dc._msdcs.mackdev.mackenziecarr.com I've seem to have tried everything even tried adding this record to the DNS server of the primary forest. I even successfully joined this server to the domain without any issues but trying to create a new domain under the existing forest is no luck. The primary forest I.P. address is 192.168.2.20 the server that I am using to try to make a child domain is 192.168.2.21 My ipconfig are as follows: I.P. Address: 192.168.2.21 Subnetmask: 255.255.255.0 Gateway: 192.168.2.1 Primary DNS: 192.168.2.20

  Read the article

• Different block sizes for partition and underlying logical disk on HP Raid Controller (Linux)

  - by Wawrzek

  Following links collected in this thread I started to check blockdev and found the following output indicating different sizes for partition c0d9p1 and the underlying device (c0d9): [root@machine ~]# blockdev --report /dev/cciss/c0d9 RO RA SSZ BSZ StartSec Size Device rw 256 512 4096 0 3906963632 /dev/cciss/c0d9 [root@machine ~]# blockdev --report /dev/cciss/c0d9p1 RO RA SSZ BSZ StartSec Size Device rw 256 512 2048 1 3906959039 /dev/cciss/c0d9p1 We have a lot of small files, so yes the block size is smaller than normal. The device is a logical driver on an HP P410 raid controller, simple disk without any raid - RAID 0 on one disk to be precise. (Please note that above configuration is a feature not a bug). Therefore, I have the following questions. Can the above discrepancy in the block size affect disk performance? Can I control the block size using hpacucli?

  Read the article

• Help replacing old Windows 2003 SBS DC with a Win2008 Standard Edition DC

  - by Chris

  Objective: Trying to replace a Windows 2003 SBS domain controller with a windows server 2008 Standard Edition Domain Controller. What I did: used ADPREP. Then all user accounts and OUs are successfully replicated into the 2008 server. I have also managed to transfer all the DC roles (operations master,schema,pdc) into the Server 2008. I have also used NETDOM QUERY FSMO . It displayed that all the roles transferred to the 2008 server. Problem: When I am trying to demote the windows 2003 SBS server using DCPROMO, the message is “No other Active Directory for this domain can be contacted”. I also tried shutting down the 2003 server. Users can login into the domain but they have trouble finding SHARED folders. Can someone help me find out what I did wrong ? Need a little push in the right direction here. Thank you very much ?

  Read the article

• ML 350 additional SATA RAID controller (mirror only)

  - by Nicholas

  I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up (for non backed up, non-critical, temporary storage). I had planned to just add a 2TB SATA disk and plug it into the motherboard. However I it occurred to me the motherboard might have built-in mirror RAID support? Therefore I could use two SATA disks and have some semblance of redundancy. Is this possible? Or would I need to get a cheap raid card? Any recommendations?

  Read the article

• IIS Seems to Forward Domain/IP to Domain Controller

  - by asinc

  We have a server (Server 1) with Win 2008 that is accessible by RDP and also is set as the primary DNS IP for a domain (example.com). This server is on the same network as an SBS 2008 server (Server 2) which is the domain controller and internal Dns server. Web requests going to example.com with IP of Server 1 are being passed to Server 2 and served up by IIS from Server 2. What causes this to happen? Is there a safe way to have Server 1 IIS handle the web requests which was our expected outcome? Example: DNS entry on ISP: example.com = 111.111.111.111 Server 1 = 111.111.111.111 Server 2 = 111.111.111.112 Web user goes to example.com in browser, and the page is actually returned from 111.111.111.112?

  Read the article

• RAID across SAS controller ports

  - by BlueGene

  Hi, I'm managing a HP DL360 G5 machine. It has a SAS controller with two ports. Port 1 is attached to 4 drive bays and Port 2 has 2 bays. The machine currently has 3 drives connected to Port 1 with RAID 5 configuration. I'm trying to max out the bays by adding 1 disk in port 1 and 2 in port 2. Can I group those three disks(1 disk-port, 2 disks-port 2) in a RAID 5 configuration?

  Read the article

• How to get two seperate remote domain controllers with same IP to work?

  - by Mr. Mister

  Hi, I have a VPN setup between multiple locations. Between each location and the central point (me), is a trust between our domain controllers. It all works great.. A new location wants to join, but their AD controller is using an IP address that is already in use by another AD in a separate location. Neither locations can change their IP addresses, but apparently there is a NAT rule that could be used to allow communication between each AD controller? The central site has a Cisco 5510 firewall which could perform the NAT, but I am unsure of the logic behind the NAT rule. Is anyone able to explain or help out? Thanks.

  Read the article

• Should USB controller drivers be updated?

  - by Coldblackice

  Should USB controller drivers be updated? In Windows 7, many of the core system devices/buses/controllers still use stock Microsoft drivers dating back to 2006 -- things such as USB controllers and the PCI bus (and subsequent devices in the tree). Should these be getting updated? I would think that surely there would have been improvements/fixes/updates to some or any of these drivers by now, now over 7 years old. Does Windows know "best" in this case, updating these respective drivers when it's needed, or should the user be keeping an eye out for drivers in this "vein" of devices (meaning integrated/core/non-pluggable system devices that are built into the motherboard)?

  Read the article

• Same SCSI drive appears multiple times on the controller list

  - by ohad

  Hi, I have an Adaptec AHA-2940UW SCSI adapter, to which I connected a single Atlas 10K III drive (and nothing more). When my computer loads up, the pre-OS Adaptec screen shows (I believe this is called the POST screen), where I can see the Atlas drive listed many times (i.e. with ID0, ID1, ... ID5, ID7, ID8,...,ID15 [ID6 is the adapter itself]) Using the same HD on an Adaptec AHA-2940UB the disk only shows once Since my OS hasn't been installed yet, I'm not sure if this is a problem (I would guess it is), and if so - how to solve it. Termination and multiple LUNs come mind, but the cable provides termination and I don't see why a hard drive would request multiple LUNs, especially considering it is not jumpered at all, and multuple LUN support is disabled in the Adaptec controller BIOS (via the SCSISelect utility) Thank you

  Read the article

• Password Expired Server 2008 R2

  - by Shaharyar

  Hello everybody, We're facing some trouble with our Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

  Read the article

• Samba Server as domain controller

  - by garden air

  I am using centos 6.2 on my system. I want to make samba server as PDC to join the clients computers operating systems i.e xp,windows 7 and share their files & directories.Currently I have 200 PC running both windows xp and win 7. The question I want to as is does samba 3.5.10 has a capacity to join 200 computers as a domain controller & authenticate the users ? thanks garden Thanks for your guidence.Well at the moment I am using CentOS 6.2 and samba is installed using yum command. It is amazing that I can join samba as a domain comtroller of 200 clients machines. By the way what is samba maximum limit for joining number of clients PC's.

  Read the article

• Password Expired on Server 2008 R2

  - by Shaharyar

  Hello everybody, We're facing some trouble with our Windows Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

  Read the article

• Is SATA bandwith per Port or per Controller?

  - by instanceofTom

  I always assumed that it was per Controller channel, and that If I have 4xSATA 3.0Gb/s ports on my Motherboard then I should have a potential 12.0Gb/s of bandwith. However, after doing some searching I found conflicting information suggesting that if I had 4xSATA drives connected to my MB and were using them simultaneously each drive would get only 3.0Gb/s /4 = 768 Mb/s max bandwith. So I wanted to clear up my understanding. Side question: Are there other hdd/ssd bandwith bottlenecks to be aware of? (Links to already answered questions are more than welcome)

  Read the article

• Windows 7 PC refuses to join domain

  - by Alex

  So, we're wiping clean all PCs at our office and migrating them to a new server cluster and a new domain. Last night I tested on PC and it mostly worked except it refuses to join to the domain. Now, our domain is named like EXAMPLE.COM. When I just type EXAMPLE the PC can't find the domain controller, even though I can ping it find. If I type EXAMPLE.COM it seems to work. How can I get it to work with just EXAMPLE? That's how I got all the new servers int he cluster to work (about 20 of them) and I haven't had any issues... The only difference between the Windows 7 PC(s) and the servers is that the clients will be on a 10.0.3.X network where as the servers are on a 10.0.1.X network. Oh, the domain controller and all the other servers are Windows Server 2008 R2. Suggestions will be highly appreciated!

  Read the article

• Expanding RAID 1 array size (Adaptec 1420SA controller)

  - by cincura.net

  I have an Adaptec 1420SA controller in server and RAID 1 array created. The old disks slowly started to report S.M.A.R.T errors so I replaced first one, rebuild array and then other one and rebuild the array again. But the new drives are bigger, so I'd like to expand the array to use full disk capacity. Is it somehow possible? In the Adaptec configuration utility, after POST, I didn't found anything that could do it. I still have the old drives, if it helps. The array is used for system (Windows 2008 R2 SP1) booting. Thanks.

  Read the article

< Previous Page | 44 45 46 47 48 49 50 51 52 53 54 55  | Next Page >