Search Results

Search found 1671 results on 67 pages for 'packets'.

Page 49/67 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

  • Methodology behind fetching large XML data sets in pieces

    - by Jerry Dodge
    I am working on an HTTP Server in Delphi which simply sends back a custom XML dataset. I am not following any type of standard formatting, such as SOAP. I have the system working seamlessly, except one small flaw: When I have a very large dataset to send back to the client, it might take up to 2 minutes for all the data to be transferred. The HTTP Server I'm building is essentially an XML Data based API around a database, implementing the common business rule - therefore, the requests are specific to the data behind the system. When, for example, I fetch a large set of product data, I would like to break this down and send it back piece by piece. However, a single HTTP request calls for a single response. I can't necessarily keep feeding the client with multiple different XML packets unless the client explicitly requests it. I don't have any session management, but rather an API Key. I know if I had sessions, I could keep-alive a dataset temporarily for a client, and they could request bits and pieces of it. However, without session management, I would have to execute the SQL query multiple times (for each chunk of data), and in the mean-time, if that data changes, the "pages" might get messed up, therefore causing items to show on the wrong pages, after navigating to a different page. So how is this commonly handled? What's the methodology behind breaking down a large XML dataset into chunks to save the load?

    Read the article

  • Hardening network with sysctl settings made Wi-fi downloading speed extremely slow

    - by Rohit Bansal
    I just followed up following steps to harden network security The /etc/sysctl.conf file contain all the sysctl settings. Prevent source routing of incoming packets and log malformed IP's enter the following in a terminal window: sudo vi /etc/sysctl.conf Edit the `/etc/sysctl.conf` file and un-comment or add the following lines : # IP Spoofing protection net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Ignore ICMP broadcast requests net.ipv4.icmp_echo_ignore_broadcasts = 1 # Disable source packet routing net.ipv4.conf.all.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 # Ignore send redirects net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 # Block SYN attacks net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_syn_backlog = 2048 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syn_retries = 5 # Log Martians net.ipv4.conf.all.log_martians = 1 net.ipv4.icmp_ignore_bogus_error_responses = 1 # Ignore ICMP redirects net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 # Ignore Directed pings net.ipv4.icmp_echo_ignore_all = 1 To reload sysctl with the latest changes, enter: sudo sysctl -p But, after applying the changes I found "Wi-fi" downloading speed and terminal downloading speed extremely slow (less than 1KB/s) however surfing speed through browser was good. But, using direct ethernet cable was giving a good speed. Then, I reverted back the above changes and things fall back in line once again.... Could you please let me know what possibly in above script is affecting such behaviour [and why] ? How could I still maintain hardening of network security without disturbing Wi-fi downloading speed ?

    Read the article

  • CodePlex Daily Summary for Monday, August 13, 2012

    CodePlex Daily Summary for Monday, August 13, 2012Popular ReleasesDeForm: DeForm v1.0: Initial Version Support for: GaussianBlur effect ConvolveMatrix effect ColorMatrix effect Morphology effectLiteBlog (MVC): LiteBlog 1.31: Features of this release Windows8 styled UI Namespace and code refactoring Resolved the deployment issues in the previous release Added documentation Help file Help file is HTML based built using SandCastle Help file works in all browsers except IE10Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 2.0.0 for VS11: Self-Tracking Entity Generator for WPF and Silverlight v 2.0.0 for Entity Framework 5.0 and Visual Studio 2012Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.6.0: New Stuff ImageTile Control - think People Tile MicrophoneRecorder - Coding4Fun.Phone.Audio GzipWebClient - Coding4Fun.Phone.Net Serialize - Coding4Fun.Phone.Storage this is code I've written countless times. JSON.net is another alternative ChatBubbleTextBox - Added in Hint TimeSpan languages added: Pl Bug Fixes RoundToggleButton - Enable Visual State not being respected OpacityToggleButton - Enable Visual State not being respected Prompts VS Crash fix for IsPrompt=true More...AssaultCube Reloaded: 2.5.2 Unnamed: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to pack it. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Added 3rd person Added mario jumps Fixed nextprimary code exploit ...NPOI: NPOI 2.0: New features a. Implement OpenXml4Net (same as System.Packaging from Microsoft). It supports both .NET 2.0 and .NET 4.0 b. Excel 2007 read/write library (NPOI.XSSF) c. Word 2007 read/write library(NPOI.XWPF) d. NPOI.SS namespace becomes the interface shared between XSSF and HSSF e. Load xlsx template and save as new xlsx file (partially supported) f. Diagonal line in cell both in xls and xlsx g. Support isRightToLeft and setRightToLeft on the common spreadsheet Sheet interface, as per existin...BugNET Issue Tracker: BugNET 1.1: This release includes bug fixes from the 1.0 release for email notifications, RSS feeds, and several other issues. Please see the change log for a full list of changes. http://support.bugnetproject.com/Projects/ReleaseNotes.aspx?pid=1&m=76 Upgrade Notes The following changes to the web.config in the profile section have occurred: Removed <add name="NotificationTypes" type="String" defaultValue="Email" customProviderData="NotificationTypes;nvarchar;255" />Added <add name="ReceiveEmailNotifi...ClosedXML - The easy way to OpenXML: ClosedXML 0.67.0: Conditional formats now accept formulas. Major performance improvement when opening files with merged ranges. Misc fixes.Virtual Keyboard: Virtual Keyboard v2.0 Source Code: This release has a few added keys that were missing in the earlier versions.Visual Rx: V 2.0.20622.9: help will be available at my blog http://blogs.microsoft.co.il/blogs/bnaya/archive/2012/08/12/visual-rx-toc.aspx the SDK is also available though NuGet (search for VisualRx) http://nuget.org/packages/VisualRx if you want to make sure that the Visual Rx Viewer can monitor on your machine, you can install the Visual Rx Tester and run it while the Viewer is running.????: ????2.0.5: 1、?????????????。RiP-Ripper & PG-Ripper: PG-Ripper 1.4.01: changes NEW: Added Support for Clipboard Function in Mono Version NEW: Added Support for "ImgBox.com" links FIXED: "PixHub.eu" links FIXED: "ImgChili.com" links FIXED: Kitty-Kats Forum loginPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 5): Support for Smooth Streaming SDK beta 2 Support for live playback New bitrate meter and SD/HD indicators Auto smooth streaming track restriction for snapped mode to conserve bandwidth New "Go Live" button and SeekToLive API Support for offset start times Support for Live position unique from end time Support for multiple audio streams (smooth and progressive content) Improved intellisense in JS version Support for Windows 8 RTM ADDITIONAL DOWNLOADSSmooth Streaming Client SD...Media Companion: Media Companion 3.506b: This release includes an update to the XBMC scrapers, for those who prefer to use this method. There were a number of behind-the-scene tweaks to make Media Companion compatible with the new TMDb-V3 API, so it was considered important to get it out to the users to try it out. Please report back any important issues you might find. For this reason, unless you use the XBMC scrapers, there probably isn't any real necessity to download this one! The only other minor change was one to allow the mc...NVorbis: NVorbis v0.3: Fix Ogg page reader to correctly handle "split" packets Fix "zero-energy" packet handling Fix packet reader to always merge packets when needed Add statistics properties to VorbisReader.Stats Add multi-stream API (for Ogg files containing multiple Vorbis streams)System.Net.FtpClient: System.Net.FtpClient 2012.08.08: 2012.08.08 Release. Several changes, see commit notes in source code section. CHM help as well as source for this release are included in the download. Remember that Windows 7 by default (and possibly older versions) will block you from opening the CHM by default due to trust settings. To get around the problem, right click on the CHM, choose properties and click the Un-block button. Please note that this will be the last release tested to compile with the .net 2.0 framework. I will be remov...Isis2 Cloud Computing Library: Isis2 Alpha V1.1.967: This is an alpha pre-release of the August 2012 version of the system. I've been testing and fixing many problems and have also added a new group "lock" API (g.Lock("lock name")/g.Unlock/g.Holder/g.SetLockPolicy); with this, Isis2 can mimic Chubby, Google's locking service. I wouldn't say that the system is entirely stable yet, and I haven't rechecked every single problem I had seen in May/June, but I think it might be good to get some additional use of this release. By now it does seem to...JSON C# Class Generator: JSON CSharp Class Generator 1.3: Support for native JSON.net serializer/deserializer (POCO) New classes layout option: nested classes Better handling of secondary classesAxiom 3D Rendering Engine: v0.8.3376.12322: Changes Since v0.8.3102.12095 ===================================================================== Updated ndoc3 binaries to fix bug Added uninstall.ps1 to nuspec packages fixed revision component in version numbering Fixed sln referencing VS 11 Updated OpenTK Assemblies Added CultureInvarient to numeric parsing Added First Visual Studio 2010 Project Template (DirectX9) Updated SharpInputSystem Assemblies Backported fix for OpenGL Auto-created window not responding to input Fixed freeInterna...DotSpatial: DotSpatial 1.3: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...New Projects.NET Weather Component: NET Weather is a component that will allow you to query various weather services for forcasts, current observations, etc..AxisProvider: Axis is a .NET reactive extensions based subscription and publication framework.Blawkay Hockey: Some xna testing i'm doing.Bolt Browser: Browse the web with ease. You'll never meet a browser more simple, friendly and easy to use. Blaze through the web the way it should be. Fast and beautiful.dotHTML: dotHTML provides a .NET-based DOM for HTML and CSS, facilitating code-driven creation of Web data.Fake DbConnection for Unit Testing EF Code: Unit test Entity Framework 4.3+ and confirm you have valid LINQ-to-Entities code without any need for a database connection.FNHMVC: FNHMVC is an architectural foundation for building maintainable web applications with ASP.NET, MVC, NHibernate & Autofac.FreeAgentMobile: FreeAgentMobile is a Windows Phone project intended to provide access to the FreeAgent Accounting application.Lexer: Generate a lexical analyzer (lexer) for a custom grammar by editing a T4 template.LibXmlSocket: XmlSocket LibraryMaxAlarm: This progect i create for my friend Igor.Minecraft Text Splitter: This tool was made to assist you in writing Minecraft books by splitting text into 255-byte pages and auto-copying it for later pasting into Minecraft.MxPlugin: MxPlugin is a project which demonstrates the calling of functions contained in DLLs both statically and dynamically. Parser: Generate a parser for a custom grammar by editing a T4 template.Sliding Boxes Windows Phone Game source code: .SmartSpider: ??????Http???????????,????????、??、???????。techsolittestpro: This project is testting project of codeplexThe Tiff Library - Fast & Simple .Net Tiff Library: The Tiff Library - Fast & Simple .Net Tiff LibraryVirtualizingWrapPanel: testVisual Rx: Visual Rx is a bundle of API and a Viewer which can monitor and visualize Rx datum stream (at run-time).we7T: testWebForms Transverse Library: This projet is aimed to compile best practices in ASP .NET WebForms development as generic tools working with UI components from various origins.

    Read the article

  • High number of ethernet errors. Tool for testing the ethernet card?

    - by Fabio Dalla Libera
    I have an Asus Sabertooth X79. I often get corrupted files. I checked the RAM, but memtest finds no errors. To avoid the possibility of disk errors, I tried copying the files to tmpfs. If I copy from the network, I get md5sum mismatches about once every 10 times using a 6Gb file. Copying from RAM to RAM, I didn't get mismatches. I get a very high number of errors in ifconfig (compared to others PCs I just took as reference, which have 0 with much more traffic). Here is an example RX packets:13972848 errors:200 dropped:0 overruns:0 frame:101 The motherboard is new, but do you think there're some problems with it? What could I use to test the (integrated) network adapter? What else do you think I should double check? --edit-- I tried another NIC, it gives a lot of Corrupted MAC on Input. Disconnecting: Packet corrupt lost connection. I noticed that another PC downloads at 11.1MB/s without problems. This pc at 66.0 MB/s. Is there any way to try to limit the speed?

    Read the article

  • How do I stop my ethernet network connection from dropping?

    - by Sean Hill
    My ethernet-based network connection doesn't stay up consistently. I'm running a ping against the gateway and it will: Work for a minute Freeze, time out, or give multi-second response times Repeat If it's stuck and I disable/enable networking through the network manager applet everything will work fine again for a minute. After 280 packets transmitted I'm getting 41% packet loss. I've tried a different cable and connection to the gateway but this had no effect. The distance to the gateway is just about 3 feet. Seems to work fine if I switch over to Windows, but Ubuntu is my main OS and I can't even use it right now as I depend on the network. My setup... OS: Ubuntu 11.04, dual-booting Windows 7 Mobo: Gigabyte Z68X-UD4-B3 CPU: Intel Core i7 2600K Edit A little clarification... Network Manager is still showing me as connected, but I am unable to reach to gateway or anything beyond. At no point does NM suggest the connection is lost and calling ifconfig shows that I still have an IP address. I tried connecting to a different gateway with a different cable and the same problem arises. As requested: lspci | grep -i eth 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -f [ 14.024709] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 14.026443] EXT4-fs (sda7): re-mounted. Opts: commit=0 [ 14.176101] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. [ 23.917731] eth0: no IPv6 routers present [ 726.109697] r8169 0000:07:00.0: eth0: link up [ 733.169494] r8169 0000:07:00.0: eth0: link up [ 753.930119] r8169 0000:07:00.0: eth0: link up [ 880.787332] r8169 0000:07:00.0: eth0: link up [ 1159.161283] r8169 0000:07:00.0: eth0: link up [ 1406.623550] r8169 0000:07:00.0: eth0: link up Edit @roland-taylor: Network is always available under Windows. Pings do not timeout, applications do not complain of no network availability, large downloads are not interrupted or slowed.

    Read the article

  • Solaris 11 : les nouveautés vues par les équipes de développement

    - by Eric Bezille
    Translate in English  Pour ceux qui ne sont pas dans la liste de distribution de la communauté des utilisateurs Solaris francophones, voici une petite compilation de liens sur les blogs des développeurs de Solaris 11 et qui couvre en détails les nouveautés dans de multiples domaines.  Les nouveautés côté Desktop What's new on the Solaris 11 Desktop ? S11 X11: ye olde window system in today's new operating system Accessible Oracle Solaris 11 - released ! Les outils de développements Nagging As a Strategy for Better Linking: -z guidance Much Ado About Nothing: Stub Objects Using Stub Objects The Stub Proto: Not Just For Stub Objects Anymore elffile: ELF Specific File Identification Utility Le nouveau système de packaging : Image Packaging System (IPS) Replacing the Application Packaging Developer's guide IPS Self-assembly - Part 1: overlays Self Assembly - Part 2: Multiple Packages Delevering configuration La sécurité renforcée dans Solaris Completely disabling root logins in Solaris 11 Passwork (PAM) caching for Solaris su - "a la sudo" User home directory encryption with ZFS My 11 favorite Solaris 11 features (autour de la sécurité) - par Darren Moffat Exciting crypto advances with the T4 processor and Oracle Solaris 11 SPARC T4 OpenSSL Engine Solaris AESNI OpenSSL Engine for Intel Westmere Gestion et auto-correction d'incident - "Self-Healing" : Service Management Facility (SMF) & Fault Management Architecture (FMA)  Introducing SMF Layers Oracle Solaris 11 - New Fault Management Features Virtualisation : Oracle Solaris Zones These are 11 of my favorite things! (autour des zones) - par Mike Gerdts Immutable Zones on Encrypted ZFS The IPS System Repository (avec les zones) - par Tim Foster Quelques bonus de la communauté Solaris  Solaris 11 DTrace syscall Provider Changes Solaris 11 - hostmodel (Control send/receive behavior for IP packets on a multi-homed system) A Quick Tour of Oracle Solaris 11 Pour terminer, je vous engage également à consulter ce document de référence fort utile :  Transition from Oracle Solaris 10 to Oracle Solaris 11 Bonne lecture ! Translate in English 

    Read the article

  • can ping, but not SSH

    - by Matt
    So I have NetworkManager, connected to an AP on wlan1. I have wlan0 connected to a AdHoc network. I have Firestarter sharing my inet on the Adhoc. I have my ipod connected to wlan0, IP 10.42.43.101. wlan0 Link encap:Ethernet HWaddr ac:xx:12:81:7f:xx inet addr:10.42.43.1 Bcast:10.255.255.255 Mask:255.0.0.0 wlan1 Link encap:Ethernet HWaddr 00:xx:b3:98:f2:xx inet addr:10.0.1.61 Bcast:10.0.1.255 Mask:255.255.255.0 Now, I can ping my Jailbroken, SSH-enabled and running ipod touch: matt: ~ $ ping 10.42.43.101 PING 10.42.43.101 (10.42.43.101) 56(84) bytes of data. 64 bytes from 10.42.43.101: icmp_req=1 ttl=64 time=168 ms 64 bytes from 10.42.43.101: icmp_req=2 ttl=64 time=256 ms 64 bytes from 10.42.43.101: icmp_req=3 ttl=64 time=151 ms ^C --- 10.42.43.101 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 151.465/191.979/256.316/46.003 But I cannot SSH it: $ ssh [email protected] -vv OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.42.43.101 [10.42.43.101] port 22. It just stays there till I ^C it.. Here's my routing: $ ip route show 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 2 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 319 169.254.0.0/16 dev vboxnet0 proto kernel scope link src 169.254.128.223 metric 204 10.0.0.0/8 dev wlan0 proto kernel scope link src 10.42.43.1 default via 10.0.1.1 dev wlan1 proto static default via 10.0.1.1 dev wlan1 metric 319

    Read the article

  • CodePlex Daily Summary for Sunday, August 12, 2012

    CodePlex Daily Summary for Sunday, August 12, 2012Popular ReleasesThisismyusername's codeplex page.: Run! Thunderstorm! Classic Multiplatform: The classic edition now on any device, you don't have to get the touch edition for touch screens!SharePoint Developers & Admins: SPTaxCleaner Tool - Cleaner Taxonomy Data: For more information on the tool and how to use it: SPTaxCleaner Run the tool at your own risk!BugNET Issue Tracker: BugNET 1.1: This release includes bug fixes from the 1.0 release for email notifications, RSS feeds, and several other issues. Please see the change log for a full list of changes. http://support.bugnetproject.com/Projects/ReleaseNotes.aspx?pid=1&m=76 Upgrade Notes The following changes to the web.config in the profile section have occurred: Removed <add name="NotificationTypes" type="String" defaultValue="Email" customProviderData="NotificationTypes;nvarchar;255" />Added <add name="ReceiveEmailNotifi...Virtual Keyboard: Virtual Keyboard v2.0 Source Code: This release has a few added keys that were missing in the earlier versions.????: ????2.0.5: 1、?????????????。RiP-Ripper & PG-Ripper: PG-Ripper 1.4.01: changes NEW: Added Support for Clipboard Function in Mono Version NEW: Added Support for "ImgBox.com" links FIXED: "PixHub.eu" links FIXED: "ImgChili.com" links FIXED: Kitty-Kats Forum loginPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 5): Support for Smooth Streaming SDK beta 2 Support for live playback New bitrate meter and SD/HD indicators Auto smooth streaming track restriction for snapped mode to conserve bandwidth New "Go Live" button and SeekToLive API Support for offset start times Support for Live position unique from end time Support for multiple audio streams (smooth and progressive content) Improved intellisense in JS version Support for Windows 8 RTM ADDITIONAL DOWNLOADSSmooth Streaming Client SD...Media Companion: Media Companion 3.506b: This release includes an update to the XBMC scrapers, for those who prefer to use this method. There were a number of behind-the-scene tweaks to make Media Companion compatible with the new TMDb-V3 API, so it was considered important to get it out to the users to try it out. Please report back any important issues you might find. For this reason, unless you use the XBMC scrapers, there probably isn't any real necessity to download this one! The only other minor change was one to allow the mc...Avian Mortality Detection Entry Application: Detection Entry: The most recent and up-to-date version of the Detection Entry application. Please click on the CLICKONCE link above to install.NVorbis: NVorbis v0.3: Fix Ogg page reader to correctly handle "split" packets Fix "zero-energy" packet handling Fix packet reader to always merge packets when needed Add statistics properties to VorbisReader.Stats Add multi-stream API (for Ogg files containing multiple Vorbis streams)The Ftp Library - Most simple, full-featured .NET Ftp Library: TheFtpLibrary v1.0: First version. Please report any bug and discuss how to improve this library in 'Discussion' section.VisioAutomation: Visio Power Tools 2010 (Beta): Visio Power Tools 2010 An Add-in for Visio 2010. In Beta but should be very stable. Some Cool Features Import Colors - From Kuler, ColourLovers, or manually enter RGB values Create a Document containing images of all masters in multiple stencils Toggle text case Copy All text from all shapes Export document to XHTML (with embedded SVG) Export document to XAML Updates2012-08-10 - Fixed path handling when generating the HTML stencil catalogXBMC for LCDSmartie: v 0.7.1: Changes: Version 0.7.1 - Removed unused configuration options: You can remove the user and pass section from your LCDSmartie.exe.config Version 0.7.0 - Changed JSON-Protocol to TCP: This means the plugin will run much faster and chances that LCDSmartie will stutter are minimized Note: You will have to change some settings in your LCDSmartie.exe.config, as TCP uses a different port than HTTP (9090 is default in XBMC)WPF RSS Feed Reader: WPF RSS Feed Reader 4.1: WPF RSS Feed Reader 4.1.x This application has been developed using Visual Studio 2010 with .NET 4.0 and Microsoft Expression Blend. It makes use of the MVVM Light Toolkit, more information can be found here Fixed bug when first installed - handle null reference on _proxySetting Fixed bug if trying to open error log but error log doesn't exist yet Added strings to resources Moved AsssemblyInfo centrally and linked to other projectsScutex: Scutex 4th Preview Release 0.4: This is the fourth preview release for the new Scutex 0.4 Beta. This preview release is unstable and contains some UI issues that are being worked on due to an installation of a brand new GUI. The stable version of the 0.4 Beta will be out shortly as soon as this release passes QA. The following were fixed in this release *Fixed an issue with the Upload Product dialog that would cause it to throw an exception. Known Issues *The download service logs grid does not display properlySystem.Net.FtpClient: System.Net.FtpClient 2012.08.08: 2012.08.08 Release. Several changes, see commit notes in source code section. CHM help as well as source for this release are included in the download. Remember that Windows 7 by default (and possibly older versions) will block you from opening the CHM by default due to trust settings. To get around the problem, right click on the CHM, choose properties and click the Un-block button. Please note that this will be the last release tested to compile with the .net 2.0 framework. I will be remov...Isis2 Cloud Computing Library: Isis2 Alpha V1.1.967: This is an alpha pre-release of the August 2012 version of the system. I've been testing and fixing many problems and have also added a new group "lock" API (g.Lock("lock name")/g.Unlock/g.Holder/g.SetLockPolicy); with this, Isis2 can mimic Chubby, Google's locking service. I wouldn't say that the system is entirely stable yet, and I haven't rechecked every single problem I had seen in May/June, but I think it might be good to get some additional use of this release. By now it does seem to...JSON C# Class Generator: JSON CSharp Class Generator 1.3: Support for native JSON.net serializer/deserializer (POCO) New classes layout option: nested classes Better handling of secondary classesAxiom 3D Rendering Engine: v0.8.3376.12322: Changes Since v0.8.3102.12095 ===================================================================== Updated ndoc3 binaries to fix bug Added uninstall.ps1 to nuspec packages fixed revision component in version numbering Fixed sln referencing VS 11 Updated OpenTK Assemblies Added CultureInvarient to numeric parsing Added First Visual Studio 2010 Project Template (DirectX9) Updated SharpInputSystem Assemblies Backported fix for OpenGL Auto-created window not responding to input Fixed freeInterna...DotSpatial: DotSpatial 1.3: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...New ProjectsAppFabric Cache Admin Tool: Appfabric Admin tool is a GUI tool provided for Cache Administration. This tool can be used for both Appfabric 1.0 and 1.1 versions.Bootstrap XML Navigation: Bootstrap XML Navigation is an ASP.NET Server Control which provide the ability to off-load your Bootstrap navigation structure to external XML files.Classic MVC: Classic MVC is an MVC framework written entirely in JScript for Microsoft's Classic ASP. Separation of concerns, controllers, partial views and more.Component Spectrum: Component Spectrum is an E-Commerce Application project.Developments in Java: Free Develop JavaDongGPrj: DongGPrjEsShop: ???????,????。。。F# Indent Visual Studio addon: The addon to show how to use SmartIndent and change the indent behavior in F# content.FizzBuzzAssignment: This is HeadSpring assignment.hotfighter: a act game!!!iSoilHotel: It is a hotel management system that using Microsoft N-Layer Architecture as the primary thoughts.KVBL (K's VB6 library) VB6????,????????.: KVBL??VB6??????、???????,????????,??????,????VB????,??????????。????:??????、???、??、????、??、????、??、??、?????、?????、???????,???????……Meteorite: c# game 3d wp7 space ship meteoriteMetro App Helpers: Helper classes for building Metro style app on Windows 8.MobileShop: Mobile shop for Iphone & AndroidMomentum: this is q project pqrticipqtion between meir and david concerning student university project on physics.OneLine: dfgfdgPreflight: Summary HereResilient FileSystemWatcher for monitoring network folders: Drop in replacement for FileSystemWatcher that works for network folders and compensate for network outages, server restarts ect.SkyPoint: A Windows Phone 7 app aimed at novice astronomers.test20120811: summary of this projectVS Unbind Source Control: Remove Source Control bindings from Visual Studio Solution and Project FilesWcf SWA (SFTI) implementation: First releasewebstart: new web tech testwinform_framework: winform_frameworkwtopenapi: wtopen sina weibo sdk txweibosdk qzone sdk

    Read the article

  • Troubleshooting Your Network with Oracle Linux

    - by rickramsey
    Are you afraid of network problems? I was. Whenever somebody said "it's probably the network," I went to lunch. And hoped that it was fixed by the time I got back. Turns out it wasn't that hard to do a little basic troubleshooting Tech Article: Troubleshooting Your Network with Oracle Linux by Robert Chase You're no doubt already familiar with ping. Even I knew how to use ping. Turns out there's another command that can show you not just whether a system can respond over the network, but the path the packets to that system take. Our blogging platform won't allow me to write the name down, but I can tell you that if you replace the x in this word with an e, you'll have the right command: tracxroute Once you get used to those, you can venture into the realms of mtr, nmap, and netcap. Robert Chase explains how each one can help you troubleshoot the network, and provides examples for how to use them. Robert is not only a solid writer, he is also a brilliant motorcyclist and rides an MV Augusta F4 750. About the Photograph Photo of flowers in San Simeon, California, taken by Rick Ramsey on a ride home from the Sun Reunion in May 2014. - Rick Follow me on: Personal Blog | Personal Twitter   Follow OTN Garage on: Web | Facebook | Twitter | YouTube

    Read the article

  • Release/Change management - best aproach

    - by Bob Rivers
    I asked this question an year ago in StackOverflow and never got a good answer. Since Programmers seems to be a better place to ask it, I'll give it a try... What is the better way to work with release management? More specifically what would be the best way to release packages? For example, assuming that you have a relatively stable system, a good quality assurance process (QA), etc. How do you prefer to release new versions? Let's assume that we are talking about a mid to large "centralized" web system (no clients), in-house development. This system can be considered "vital" for a corporate operations. I have a tendency to prefer to do this by releasing packets at regular intervals, not greater than 1 to 3 months. During this period, I will include into the package,fixes and improvements and make the implementation in production environment only once. But I've seen some people who prefer to place small changes in production, but with a greater frequency. The claim of these people is that by doing so, it is easier to identify bugs that have gone through the process of QA: in a package with 10 changes and another with only 1, it is much easier to know what caused the problem in the package with just one change... What is the opinion came from you?

    Read the article

  • Subdomain still times out after being set up a month ago

    - by user8137
    I would like to use the subdomain www.high-res.domain.com to be accessed by external customers with specific permissions to access the site (like FTP). We use Network Solutions to house domain.com. We recently added a new IP address to point to www.high-res.domain.com. I gave the IP address to the company that hosts our website. I pinged www.high-res.domain.com and it points to the correct IP address but still times out. It’s been a few weeks now and when you ping it, it still times out. C:\>ping XXX.XXX.X.XXX Pinging XXX.XXX.X.XXX with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for XXX.XXX.X.XXX: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss). tracert times out as well. I even went to DNS tools and a few other sites for checking this and it shows the same thing. I recently went into the DNSmgmt on our server (wink2k3sp1) and created an A record under the DomainDnsZones which translated to a CNAME when you look at it. Under the domain it has two entries, one to the subdomain and the other to the website host. Each has separate IP addresses. Is this correct?

    Read the article

  • Worker roles in Windows Azure to host a multiplayer server

    - by MrWiggels
    I've been doing research on where to host a simple multi-player backend for a simple game I'm developing. So as a first choice I downloaded the Windows Azure SDK, which provides a nice and simple emulator environment where you can test out your application before uploading. I also download the Azure Social Game Toolkit (Visit), and followed as far as my understanding can take me. So, down to the main question. Is there anybody with experience developing Azure applications. I'm developing a Action RPG game, in a similar vein to Diablo III. I was thinking of putting up Matchmaking, Friends Lists, etc. Is there another way to connect to Azure services via something like UDP or TCP for sending packets or does everything have to go through HTTP requests? Is it even possible to use HTTP request/response for something like this? All game commands will be simple. Because the game server and the clients will be kept in-sync and will have deterministic actions, I'm just going to send actions like "Use Primary Skill" and "Use Secondary Skill". Any hints, ideas, light bulbs or a smack-in-the-face presentation will be much appreciated.

    Read the article

  • Apache DVB http video Streaming bandwidth or priority problem

    - by igino manfre'
    I'm streaming few precompressed DVB videos from cloud. The streams are generated from VLC on "impossible" ports (such as 64085, 64086 etc) reverse proxed by Apache on port 80 and 8080. All the generated streams are listed in "http://95.110.164.61/indexv.html". From an ADSL connection with enough downlink bandwidth, recalling the stream generated by VLC (such as "http://95.110.164.61:64087/mpg2_6.4") it flows fluently. Recalling the same stream proxed by Apache ("http://95.110.164.61/mpg2_6.4") the stream stops and goes. The only situation in which the Apache proxed streams flow regularly is from a site connected through 64 Mbps warranted bandwith with RTT to the server less than 10 mseconds. Please note that streams below 2 Mbps are fluently proxed. The system is a single core xeon with windows 2008 R2 on 4 GB of RAM with 1 Gbps of network bandwidth. The drain of computational and bandwidth resources is negligeable, the RAM usage always lower than 50%. On the system I run many VLC streamers. Any of them drains a variable amount of RAM (from about 25 to 70 MB). On the contrary the couple of httpd.exe processes drain no more than 7 MB. Using Wireshark (on the server) I see that VLC directy send to the client much more packets than Apache, and the stream is framgmented on many frames. I'm not a programmer, a newby of Apache. Can anyone please address me to a specific portion of the Apache's huge documentation? Thank you. igino

    Read the article

  • Connected to wireless, but no internet access

    - by boogaloo
    After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

    Read the article

  • Subdomain still times out after set up a month ago

    - by user8137
    I'm a newbie on this and this has probably been asked already but the subjects online were close but too vague in there answers so I've probably really messed this up. I would really appreciate specific step by step instructions. This is what I'd like to do: use the subdomain www.high-res.domain.com to be accessed by external customers with specific permissions to access the site (like ftp). We use Network Solutions to house domain.com. We recently added a new ip address to point to www.high-res.domain.com. I gave the ip address to the company that hosts our website. I pinged www.high-res.domain.com and it points to the correct ip address but still times out. It’s been a few weeks now and when you ping it, it still times out. C:ping XXX.XXX.X.XXX Pinging XXX.XXX.X.XXX with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for XXX.XXX.X.XXX: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss). Tracert times out as well. I even went to DNS tools and a few other sites for checking this and it shows the same thing. I recently went into the DNSmgmt on our server (wink2k3sp1) and created an A record under the DomainDnsZones which translated to a Cname when you look at it. Under the Domain it has two entries one to the subdomain and the other to the website host each with separate ip addresses. Is this correct? The website people are too busy on another project to research it further and my friends haven't gotten back to me. Please help. Thanks KK

    Read the article

  • How to sync client and server at the first frame

    - by wheelinlight
    I'm making a game where an authoritative server sends information to all clients about states and positions for objects in a 3d world. The player can control his character by clicking on the screen to set a destination for the character, much like in the Diablo series. I've read most information I can find online about interpolation, reconciliation, and general networking architecture (Valve's for instance). I think I understand everything but one thing seems to be missing in every article I read. Let say we have an interpolation delay of 100ms, server tickrate=50ms, latency=200ms; How do I know when 100ms has past on the client? If the server sends the first update on t=0, can I assume it arrives at t=200, therefore assuming that all packets takes the same amount of time to reach the client? What if the first packet arrives a little quick, for instance at t=150. I would then be starting the client with t=150 and at t=250 it will think it has past 100ms since its connect to the server when it in fact only 50ms has past. Hopefully the above paragraph is understandable. The summarized question would be: How do I know at what tick to start simulating the client? EDIT: This is how I ended up doing it: The client keeps a clock (approximately) in sync with the server. The client then simulates the world at simulationTime = syncedTime - avg(RTT)/2 - interpolationTime The round-trip time can fluctuate so therefore I average it out over time. By only keeping the most recent values when calculating the average I hope to adapt to more permanent changes in latency. It's still to early to draw any conclusion. I'm currently simulating bad network connections, but it's looking good so far. Anyone see any possible problems?

    Read the article

  • Computer becomes unreachable on lan after some time

    - by Ashfame
    I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

    Read the article

  • Design help with parallel process

    - by brazc0re
    I am re-factoring some code and an having an issue with retrieving data from two parallel processes. I have an application that sends packets back and forth via different mediums (ex: RS232, TCP/IP, etc). The jist if of this question is that there are two parallel processes going on. I hope the picture below displays what is going on better than I can word it: SetupRS232() class creates a new instance of the SerialPort by: SerialPort serialPort = new SerialPort(); My question is, what is the best way that the Communicator() class, which sends out the packet via the respective medium, get access to the SerialPort object from the SetupRS232 class? I can do it with a Singleton but have heard that they are generally not the best design to go by. I am trying to follow SRP but I do feel like I am doing something wrong here. Communicator() will need to go out of it's way to get access to SetupRS232() to get access to the SerialPort class. I actually haven't found a way to even get access to it. Would designing each medium class, for example, SetupRS232(), SetupTCPIP, as a singleton be the best way to approach this problem?

    Read the article

  • NMap 6.01

    - by TATWORTH
    NMap 6.01 has been released at http://nmap.org/download.html"Nmap ("Network Mapper") is a free and open source (license) utility for network discovery and security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Nmap uses raw IP packets in novel ways to determine what hosts are available on the network, what services (application name and version) those hosts are offering, what operating systems (and OS versions) they are running, what type of packet filters/firewalls are in use, and dozens of other characteristics. It was designed to rapidly scan large networks, but works fine against single hosts. Nmap runs on all major computer operating systems, and official binary packages are available for Linux, Windows, and Mac OS X. In addition to the classic command-line Nmap executable, the Nmap suite includes an advanced GUI and results viewer (Zenmap), a flexible data transfer, redirection, and debugging tool (Ncat), a utility for comparing scan results (Ndiff), and a packet generation and response analysis tool (Nping)."Home page is at http://nmap.org/  Nmap is free to download and use. You can download the source and compile it yourself if you so require.

    Read the article

  • Strange traffic on fresh Ubuntu Server install

    - by Fishy
    I've just installed Ubuntu Server on my home box after becoming partially familiar with it at work and wanting to train up as a Pen Tester. I installed the latest version on a logical partition (the main one contained Win7), and selected none of the extra modules (I think). I installed ngrep and fired it up (along with TCPdump) and immediately saw some strange traffic which I am unable to identify. My pc is sending out UDP packets every couple of seconds to a seemingly random series of IP addresses, all on the same port (47669 - though I did also see it use another port for a while). I watched it do this for about 20 mins, whilst trying to work out why it was doing it. The only other traffic was the odd ARP request for the router and SSDP UPnP broadcasts from the router. Anyone know what this is, or have any advice on how best to find out? Thanks. EDIT: Actually, it's not my box generating the traffic. It's receiving the traffic on that port, from a series of IP addresses, and returning 'port unreachable' messages.

    Read the article

  • networking without port forwarding

    - by Wallacoloo
    I'm trying to add networking functionality to my game. I want any user to be able to host the game, and anyone to be able to connect as a client. The client sends info to the host about their player's position, etc. When the host receives a message, it validates it and then broadcasts it to its other clients. I will primarily be dealing with UDP, but will also need TCP for chat & lobby stuff. The problem is that I can't seem to get a packet sent from the client to the host or the other way around without enabling port forwarding on my router. But I don't think this is necessary. I believe the reason I need port forwarding is because I want to send a packet from 1 computer on a LAN to another computer on a different LAN, but neither of them have a global ip address since they're in a LAN. So really, I can only send packets targeting the other network's router, which must forward it on to the machine I want to reach. So how can I do this without port forwarding? Somehow a web server can communicate with my computer, which doesn't have a global ip, without port forwarding. And I've played plenty of multi-player games that don't require me to enable port forwarding. So it must be possible. Btw, I'm using SDL_Net. I don't think this will change anything though.

    Read the article

  • Cannot determine ethernet address for proxy ARP on PPTP

    - by Linux Intel
    I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 and i get this error also on PPTP server error log Cannot determine ethernet address for proxy ARP Ping from Client2 to Client1 PING 10.0.0.60 (10.0.0.60) 56(84) bytes of data. --- 10.0.0.60 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5000ms route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables is stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

    Read the article

  • Sharing Bandwidth and Prioritizing Realtime Traffic via HTB, Which Scenario Works Better?

    - by Mecki
    I would like to add some kind of traffic management to our Internet line. After reading a lot of documentation, I think HFSC is too complicated for me (I don't understand all the curves stuff, I'm afraid I will never get it right), CBQ is not recommend, and basically HTB is the way to go for most people. Our internal network has three "segments" and I'd like to share bandwidth more or less equally between those (at least in the beginning). Further I must prioritize traffic according to at least three kinds of traffic (realtime traffic, standard traffic, and bulk traffic). The bandwidth sharing is not as important as the fact that realtime traffic should always be treated as premium traffic whenever possible, but of course no other traffic class may starve either. The question is, what makes more sense and also guarantees better realtime throughput: Creating one class per segment, each having the same rate (priority doesn't matter for classes that are no leaves according to HTB developer) and each of these classes has three sub-classes (leaves) for the 3 priority levels (with different priorities and different rates). Having one class per priority level on top, each having a different rate (again priority won't matter) and each having 3 sub-classes, one per segment, whereas all 3 in the realtime class have highest prio, lowest prio in the bulk class, and so on. I'll try to make this more clear with the following ASCII art image: Case 1: root --+--> Segment A | +--> High Prio | +--> Normal Prio | +--> Low Prio | +--> Segment B | +--> High Prio | +--> Normal Prio | +--> Low Prio | +--> Segment C +--> High Prio +--> Normal Prio +--> Low Prio Case 2: root --+--> High Prio | +--> Segment A | +--> Segment B | +--> Segment C | +--> Normal Prio | +--> Segment A | +--> Segment B | +--> Segment C | +--> Low Prio +--> Segment A +--> Segment B +--> Segment C Case 1 Seems like the way most people would do it, but unless I don't read the HTB implementation details correctly, Case 2 may offer better prioritizing. The HTB manual says, that if a class has hit its rate, it may borrow from its parent and when borrowing, classes with higher priority always get bandwidth offered first. However, it also says that classes having bandwidth available on a lower tree-level are always preferred to those on a higher tree level, regardless of priority. Let's assume the following situation: Segment C is not sending any traffic. Segment A is only sending realtime traffic, as fast as it can (enough to saturate the link alone) and Segment B is only sending bulk traffic, as fast as it can (again, enough to saturate the full link alone). What will happen? Case 1: Segment A-High Prio and Segment B-Low Prio both have packets to send, since A-High Prio has the higher priority, it will always be scheduled first, till it hits its rate. Now it tries to borrow from Segment A, but since Segment A is on a higher level and Segment B-Low Prio has not yet hit its rate, this class is now served first, till it also hits the rate and wants to borrow from Segment B. Once both have hit their rates, both are on the same level again and now Segment A-High Prio is going to win again, until it hits the rate of Segment A. Now it tries to borrow from root (which has plenty of traffic spare, as Segment C is not using any of its guaranteed traffic), but again, it has to wait for Segment B-Low Prio to also reach the root level. Once that happens, priority is taken into account again and this time Segment A-High Prio will get all the bandwidth left over from Segment C. Case 2: High Prio-Segment A and Low Prio-Segment B both have packets to send, again High Prio-Segment A is going to win as it has the higher priority. Once it hits its rate, it tries to borrow from High Prio, which has bandwidth spare, but being on a higher level, it has to wait for Low Prio-Segment B again to also hit its rate. Once both have hit their rate and both have to borrow, High Prio-Segment A will win again until it hits the rate of the High Prio class. Once that happens, it tries to borrow from root, which has again plenty of bandwidth left (all bandwidth of Normal Prio is unused at the moment), but it has to wait again until Low Prio-Segment B hits the rate limit of the Low Prio class and also tries to borrow from root. Finally both classes try to borrow from root, priority is taken into account, and High Prio-Segment A gets all bandwidth root has left over. Both cases seem sub-optimal, as either way realtime traffic sometimes has to wait for bulk traffic, even though there is plenty of bandwidth left it could borrow. However, in case 2 it seems like the realtime traffic has to wait less than in case 1, since it only has to wait till the bulk traffic rate is hit, which is most likely less than the rate of a whole segment (and in case 1 that is the rate it has to wait for). Or am I totally wrong here? I thought about even simpler setups, using a priority qdisc. But priority queues have the big problem that they cause starvation if they are not somehow limited. Starvation is not acceptable. Of course one can put a TBF (Token Bucket Filter) into each priority class to limit the rate and thus avoid starvation, but when doing so, a single priority class cannot saturate the link on its own any longer, even if all other priority classes are empty, the TBF will prevent that from happening. And this is also sub-optimal, since why wouldn't a class get 100% of the line's bandwidth if no other class needs any of it at the moment? Any comments or ideas regarding this setup? It seems so hard to do using standard tc qdiscs. As a programmer it was such an easy task if I could simply write my own scheduler (which I'm not allowed to do).

    Read the article

  • How to stop a ICMP attack?

    - by cumhur onat
    We are under a heavy icmp flood attack. Tcpdump shows the result below. Altough we have blocked ICMP with iptables tcpdump still prints icmp packets. I've also attached iptables configuration and "top" result. Is there any thing I can do to completely stop icmp packets? [root@server downloads]# tcpdump icmp -v -n -nn tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 03:02:47.810957 IP (tos 0x0, ttl 49, id 16007, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 124, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811559 IP (tos 0x0, ttl 49, id 16010, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811922 IP (tos 0x0, ttl 49, id 16012, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812485 IP (tos 0x0, ttl 49, id 16015, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 126, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812613 IP (tos 0x0, ttl 49, id 16016, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812992 IP (tos 0x0, ttl 49, id 16018, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.813582 IP (tos 0x0, ttl 49, id 16020, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814092 IP (tos 0x0, ttl 49, id 16023, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814233 IP (tos 0x0, ttl 49, id 16024, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815579 IP (tos 0x0, ttl 49, id 16025, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815726 IP (tos 0x0, ttl 49, id 16026, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815890 IP (tos 0x0, ttl 49, id 16027, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 iptables configuration: [root@server etc]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ofis tcp -- anywhere anywhere tcp dpt:mysql ofis tcp -- anywhere anywhere tcp dpt:ftp DROP icmp -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination DROP icmp -- anywhere anywhere Chain ofis (2 references) target prot opt source destination ACCEPT all -- OUR_OFFICE_IP anywhere DROP all -- anywhere anywhere top: top - 03:12:19 up 400 days, 15:43, 3 users, load average: 1.49, 1.67, 2.61 Tasks: 751 total, 3 running, 748 sleeping, 0 stopped, 0 zombie Cpu(s): 8.2%us, 1.0%sy, 0.0%ni, 87.9%id, 2.1%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 32949948k total, 26906844k used, 6043104k free, 4707676k buffers Swap: 10223608k total, 0k used, 10223608k free, 14255584k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 36 root 39 19 0 0 0 R 100.8 0.0 17:03.56 ksoftirqd/11 10552 root 15 0 11408 1460 676 R 5.7 0.0 0:00.04 top 7475 lighttpd 15 0 304m 22m 15m S 3.8 0.1 0:05.37 php-cgi 1294 root 10 -5 0 0 0 S 1.9 0.0 380:54.73 kjournald 3574 root 15 0 631m 11m 5464 S 1.9 0.0 0:00.65 node 7766 lighttpd 16 0 302m 19m 14m S 1.9 0.1 0:05.70 php-cgi 10237 postfix 15 0 52572 2216 1692 S 1.9 0.0 0:00.02 scache 1 root 15 0 10372 680 572 S 0.0 0.0 0:07.99 init 2 root RT -5 0 0 0 S 0.0 0.0 0:16.72 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.06 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 1:10.46 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:01.11 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 2:36.15 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.19 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 3:48.91 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.20 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 uname -a [root@server etc]# uname -a Linux thisis.oursite.com 2.6.18-238.19.1.el5 #1 SMP Fri Jul 15 07:31:24 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux arp -an [root@server downloads]# arp -an ? (77.92.136.194) at 00:25:90:04:F0:90 [ether] on eth0 ? (192.168.0.2) at 00:25:90:04:F0:91 [ether] on eth1 ? (77.92.136.193) at 00:23:9C:0B:CD:01 [ether] on eth0

    Read the article

  • EC2 instance suddenly refusing SSH connections and won't respond to ping

    - by Chris
    My instance was running fine and this morning I was able to access a Ruby on Rails app hosted on it. An hour later I suddenly wasn't able to access my site, my SSH connection attempts were refused and the server wasn't even responding to ping. I didn't change anything on my system during that hour and reboots aren't fixing it. I've never had any problems connecting or pinging the system before. Can someone please help? This is on my production system! OS: CentOS 5 AMI ID: ami-10b55379 Type: m1.small [] ~% ssh -v *****@meeteor.com OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to meeteor.com [184.73.235.191] port 22. debug1: connect to address 184.73.235.191 port 22: Connection refused ssh: connect to host meeteor.com port 22: Connection refused [] ~% ping meeteor.com PING meeteor.com (184.73.235.191): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 ^C --- meeteor.com ping statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss [] ~% ========= System Log ========= Restarting system. Linux version 2.6.16-xenU ([email protected]) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000006a400000 (usable) 980MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active IRQ lockup detection disabled Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2599.998 MHz processor. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f53fe000, maxmem 2d7fe000 Memory: 1718700k/1748992k available (1958k kernel code, 20948k reserved, 620k data, 144k init, 1003528k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5202.30 BogoMIPS (lpj=26011526) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Checking 'hlt' instruction... OK. Brought up 1 CPUs migration_cost=0 Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs xen_mem: Initialising balloon driver. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Xen virtual console successfully installed as tty1 Event-channel device installed. netfront: Initialising virtual ethernet driver. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 Registering block device major 8 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: init (pid=1) ** *************************************************************** *************************************************************** Pausing... 5Pausing... 4Pausing... 3Pausing... 2Pausing... 1Continuing... INIT: version 2.86 booting Welcome to CentOS release 5.4 (Final) Press 'I' to enter interactive startup. Setting clock : Fri Oct 1 14:35:26 EDT 2010 [ OK ] Starting udev: [ OK ] Setting hostname localhost.localdomain: [ OK ] No devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 275424/1310720 files, 1161123/2621440 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 4 Entering non-interactive startup Starting background readahead: [ OK ] Applying ip6tables firewall rules: modprobe: FATAL: Module ip6_tables not found. ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable 'filter' Error occurred at line: 3 Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information. [FAILED] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_ns [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Starting auditd: [FAILED] Starting irqbalance: [ OK ] Starting portmap: [ OK ] FATAL: Module lockd not found. Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ] [ OK ] Can't open RFCOMM control socket: Address family not supported by protocol Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: Can't open HIDP control socket: Address family not supported by protocol [FAILED] Starting autofs: Starting automount: automount: test mount forbidden or incorrect kernel protocol version, kernel protocol version 5.00 or above required. [FAILED] [FAILED] Starting sshd: [ OK ] Starting cups: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: no console device found[FAILED] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 390 100 390 0 0 58130 0 --:--:-- --:--:-- --:--:-- 58130 100 390 100 390 0 0 56984 0 --:--:-- --:--:-- --:--:-- 0 Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting OSSEC: [ OK ] Starting smartd: [ OK ] c CentOS release 5.4 (Final) Kernel 2.6.16-xenU on an i686 domU-12-31-39-00-C4-97 login: INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes

    Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >