Search Results

Search found 13180 results on 528 pages for 'non interactive'.

Page 490/528 | < Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >

• Newbie - what do I need to do with httpd.conf to make CakePHP work correctly?

  - by EmmyS

  (Not sure if this belongs here or on webmasters; please move if necessary.) I'm a total newbie to Cake and not much better with apache; I've done a lot of PHP but always with a server that's already been set up by someone else. So I'm going through the basic blog tutorial, and it says: A Note On mod_rewrite Occasionally a new user will run in to mod_rewrite issues, so I'll mention them marginally here. If the Cake welcome page looks a little funny (no images or css styles), it probably means mod_rewrite isn't functioning on your system. Here are some tips to help get you up and running: Make sure that an .htaccess override is allowed: in your httpd.conf, you should have a section that defines a section for each Directory on your server. Make sure the AllowOverride is set to All for the correct Directory. Make sure you are editing the system httpd.conf rather than a user- or site-specific httpd.conf. For some reason or another, you might have obtained a copy of CakePHP without the needed .htaccess files. This sometimes happens because some operating systems treat files that start with '.' as hidden, and don't copy them. Make sure your copy of CakePHP is from the downloads section of the site or our SVN repository. Make sure you are loading up mod_rewrite correctly! You should see something like LoadModule rewrite_module libexec/httpd/mod_rewrite.so and AddModule mod_rewrite.c in your httpd.conf." I'm using XAMPP on linux. I've found my httpd.conf file in opt/lampp/ etc, but am not sure what I need to do with it. I've searched for "rewrite", and there's only one line: LoadModule rewrite_module modules/mod_rewrite.so There's nothing about AddModule mod_rewrite.c. Do I just create a Directory section for the directory I've installed Cake in and set AlllowOverride to All? (I created a separate subdirectory of my wwwroot and installed in there, since I also have installs of Joomla and CodeIgniter.) Is there anything else I need to do? My download of Cake did come with two htaccess-type files (._.htaccess and .htaccess) - do I need to do anything with them? Thanks for any help you can provide to this non-server-admin. EDIT TO ADD virtual host sample: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/docs/dummy-host.example.com ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog logs/dummy-host.example.com-error_log CustomLog logs/dummy-host.example.com-access_log common </VirtualHost>

  Read the article

• how to get $form_state outside of FAPI's functions?

  - by logii

  I'm writing a custom module and I'd like to use $form_state of the current form in another non-form api function - custom_facet_view_build(). any help is appreciated :) <?php /** * Implementation of hook_perm(). */ function custom_facet_perm() { return array( 'access foo content', 'access baz content', ); } /** * Implementation of hook_menu(). */ function custom_facet_menu() { $items['faceted-search'] = array( 'title' => 'Faceted Search', 'page callback' => 'drupal_get_form', 'access arguments' => array(), ); $items['facet-search-test'] = array( 'page callback' => 'drupal_get_form', 'page arguments' => array('custom_facet_form'), 'access callback' => TRUE, 'type' => MENU_CALLBACK, ); return $items; } /** * Form definition; ahah_helper_demo form. */ function custom_facet_form($form_state) { $form = array(); ahah_helper_register($form, $form_state); if (isset($form_state['storage']['categories'])) { $categories_default_value = $form_state['storage']['categories']["#value"]; } $form['facet_search_form'] = array( '#type' => 'fieldset', '#title' => t('Faceted Search'), '#prefix' => '<div id="billing-info-wrapper">', // This is our wrapper div. '#suffix' => '</div>', '#tree' => TRUE, // Don't forget to set #tree! ); $form['facet_search_form']['categories'] = array( '#type' => 'select', '#title' => t('Category'), '#options' => _custom_facet_taxonomy_query(1), '#multiple' => TRUE, '#default_value' => $categories_default_value, ); $form['save'] = array( '#type' => 'submit', '#value' => t('Save'), ); return $form; } /** * Validate callback for the form. */ function custom_facet_form_validate($form, &$form_state) { } /** * Submit callback for the form. */ function custom_facet_form_submit($form, &$form_state) { drupal_set_message('nothing done'); $form_state['storage']['categories'] = $form['facet_search_form']['categories']; // dpm($form_state); // There's a value returned in form_state['storage] within this function } /** * Implementation of hook_views_api(). */ function custom_facet_views_api() { return array( 'api' => 2, ); } function custom_facet_view_build(&$view) { dpm($form_state); // form_state['storage] remains NULL even though there's a value on previous submission }

  Read the article

• Implementing coroutines in Java

  - by JUST MY correct OPINION

  This question is related to my question on existing coroutine implementations in Java. If, as I suspect, it turns out that there is no full implementation of coroutines currently available in Java, what would be required to implement them? As I said in that question, I know about the following: You can implement "coroutines" as threads/thread pools behind the scenes. You can do tricksy things with JVM bytecode behind the scenes to make coroutines possible. The so-called "Da Vinci Machine" JVM implementation has primitives that make coroutines doable without bytecode manipulation. There are various JNI-based approaches to coroutines also possible. I'll address each one's deficiencies in turn. Thread-based coroutines This "solution" is pathological. The whole point of coroutines is to avoid the overhead of threading, locking, kernel scheduling, etc. Coroutines are supposed to be light and fast and to execute only in user space. Implementing them in terms of full-tilt threads with tight restrictions gets rid of all the advantages. JVM bytecode manipulation This solution is more practical, albeit a bit difficult to pull off. This is roughly the same as jumping down into assembly language for coroutine libraries in C (which is how many of them work) with the advantage that you have only one architecture to worry about and get right. It also ties you down to only running your code on fully-compliant JVM stacks (which means, for example, no Android) unless you can find a way to do the same thing on the non-compliant stack. If you do find a way to do this, however, you have now doubled your system complexity and testing needs. The Da Vinci Machine The Da Vinci Machine is cool for experimentation, but since it is not a standard JVM its features aren't going to be available everywhere. Indeed I suspect most production environments would specifically forbid the use of the Da Vinci Machine. Thus I could use this to make cool experiments but not for any code I expect to release to the real world. This also has the added problem similar to the JVM bytecode manipulation solution above: won't work on alternative stacks (like Android's). JNI implementation This solution renders the point of doing this in Java at all moot. Each combination of CPU and operating system requires independent testing and each is a point of potentially frustrating subtle failure. Alternatively, of course, I could tie myself down to one platform entirely but this, too, makes the point of doing things in Java entirely moot. So... Is there any way to implement coroutines in Java without using one of these four techniques? Or will I be forced to use the one of those four that smells the least (JVM manipulation) instead?

  Read the article

• Hibernate @Transactional not starting transaction

  - by rhinds

  I have a web app using Hibernate, and I am attempting to persist some data, but it is failing to persist within a Transaction despite using the @Transactional annotation. My service class is as follows: @Service("profileService") public class ProfileService { private EntityManager entityManager; @Autowired private AccountService accountService; @Autowired private ProfileDAOImpl profileDao; @PersistenceContext public void setEntityManager(EntityManager em) { this.entityManager = em; } @Transactional public void addConnectionToAccount(SocialConnection sc) { entityManager.persist(sc); } } The addConnectionToAccount() method is being called from another Spring bean in a normal method, and the ProfileService class is currently being injected there: public class HibernateConnectionRepository implements ConnectionRepository { @Inject private ProfileService profileService; @Override @Transactional public void addConnection(SocialConnection sc) { try { profileService.addConnectionToAccount(accountId, sc); } catch (Exception e) { e.printStackTrace(); } } I tried putting the @Transactional annotation on the calling method in the vain hope that it might make a difference but nothing. Previously I have experienced problems like this its been because the object being persisted does not satisfy table restrictions (such as non-nullable columns as null) or because the method is being called from within the same class and the calling method is not Transactional, but neither of those are the case here.. Any ideas? it just fails silently, the logs are as follows: 2012-03-26 22:25:04,702 [http-bio-8085-exec-9] DEBUG com.mchange.v2.resourcepool.BasicResourcePool - trace com.mchange.v2.resourcepool.BasicResourcePool@1bc25c8 [managed: 3, unused: 2, excluded: 0] (e.g. com.mchange.v2.c3p0.impl.NewPooledConnection@e5b006) 2012-03-26 22:25:04,710 [http-bio-8085-exec-9] DEBUG org.hibernate.SQL - select SEQ_COUNT from SEQUENCE where SEQ_NAME = 'PO_SEQ' for update 2012-03-26 22:25:04,711 [http-bio-8085-exec-9] DEBUG org.hibernate.SQL - update SEQUENCE set SEQ_COUNT = ? where SEQ_COUNT = ? and SEQ_NAME = 'PO_SEQ' 2012-03-26 22:25:04,723 [http-bio-8085-exec-9] DEBUG com.mchange.v2.resourcepool.BasicResourcePool - trace com.mchange.v2.resourcepool.BasicResourcePool@1bc25c8 [managed: 3, unused: 2, excluded: 0] (e.g. com.mchange.v2.c3p0.impl.NewPooledConnection@e5b006) 2012-03-26 22:25:04,723 [http-bio-8085-exec-9] DEBUG org.hibernate.event.internal.AbstractSaveEventListener - Generated identifier: 2200, using strategy: org.hibernate.id.MultipleHiLoPerTableGenerator UPDATE Also wanted to mention that the HibernateConnectionRepository bean is not annotated and is actually being configured in an @Configuration class (if this makes any difference? not used @Configuration classes much). The method to create the bean is as follows: @Bean @Scope(value = "request", proxyMode = ScopedProxyMode.INTERFACES) public ConnectionRepository connectionRepository() { Authentication authentication = SecurityContextHolder.getContext().getAuthentication(); if (authentication == null) { throw new IllegalStateException("Unable to get a ConnectionRepository: no user signed in"); } ApplicationUser user = (ApplicationUser) authentication.getPrincipal(); return usersConnectionRepository().createConnectionRepository(String.valueOf(user.getAccountId())); } The bean is scoped to the logged in user, but may also be created multiple times for each user..

  Read the article

• A NSMutableArray is destroying my life!

  - by camilo

  EDITED to show the relevant part of the code Hi. There's a strange problem with an NSMutableArray which I'm just not understanding... Explaining: I have a NSMutableArray, defined as a property (nonatomic, retain), synthesized, and initialized with 29 elements. realSectionNames = [[NSMutableArray alloc] initWithCapacity:29]; After the initialization, I can insert elements as I wish and everything seems to be working fine. While I'm running the application, however, if I insert a new element in the array, I can print the array in the function where I inserted the element, and everything seems ok. However, when I select a row in the table, and I need to read that array, my application crashes. In fact, it cannot even print the array anymore. Is there any "magical and logical trick" everybody should know when using a NSMutableArray that a beginner like myself can be missing? Thanks a lot. I declare my array as realSectionNames = [[NSMutableArray alloc] initWithCapacity:29]; I insert objects in my array with [realSectionNames addObject:[category categoryFirstLetter]]; although I know i can also insert it with [realSectionNames insertObject:[category categoryFirstLetter] atIndex:i]; where the "i" is the first non-occupied position. After the insertion, I reload the data of my tableView. Printing the array before or after reloading the data shows it has the desired information. After that, selecting a row at the table makes the application crash. This realSectionNames is used in several UITableViewDelegate functions, but for the case it doesn't matter. What truly matters is that printing the array in the beginning of the didSelectRowAtIndexPath function crashes everything (and of course, doesn't print anything). I'm pretty sure it's in that line, for printing anything he line before works (example): NSLog(@"Anything"); NSLog(@"%@", realSectionNames); gives the output: 2010-03-24 15:16:04.146 myApplicationExperience[3527:207] Anything [Session started at 2010-03-24 15:16:04 +0000.] GNU gdb 6.3.50-20050815 (Apple version gdb-967) (Tue Jul 14 02:11:58 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-apple-darwin".sharedlibrary apply-load-rules all Attaching to process 3527. Still not understanding what kind of stupidity I've done this time... maybe it's not too late to follow the career of brain surgeon?

  Read the article

• JLabel not displaying all the characters even after dynamically changing font size

  - by wniroshan

  Hi all, I am trying to fit a sentence that changes often, in to a few jlabels. Widths of my 3 jlabels stay unchanged all the time. What I am doing is changing the font size so all the characters can fit with out non being out of the display range of the labels. What I do is call below code snippet when ever sentence is changed. Here is my code String sentence = "Some long sentence"; int SentenceLength = sentence.length(); int FontSize = 0; // sum of widths of the three labels int TotalLblLength=lbl_0ValueInWords.getWidth()+lbl_1ValueInWords.getWidth()+lbl_1ValueInWords.getWidth(); /*decide the font size so that all the characters can be displayed with out exceeding the display renge(horizontal) of the 3 labels Inconsolata -> monopace font font size == width of the font*2 (something I observed, not sure if this is true always) */ FontSize=(TotalLblLength/SentenceLength)*2; // max font size is 20 - based on label height FontSize=(FontSize>20)?20:FontSize; lbl_0ValueInWords.setFont(new java.awt.Font("Inconsolata", 0,FontSize)); lbl_1ValueInWords.setFont(new java.awt.Font("Inconsolata", 0,FontSize)); lbl_2ValueInWords.setFont(new java.awt.Font("Inconsolata", 0,FontSize)); int CharCount_lbl0 = width_lbl0 / (FontSize / 2); int CharCount_lbl1 = width_lbl1 / (FontSize / 2); int CharsCount_lbl2 = width_lbl2 / (FontSize / 2); /*Set texts of each label if sentence has more than the number of characters that can fit in the 1st label, excessive characters are moved to the 2nd label. same goes for the 2nd and 3rd labels*/ if (SentenceLength > CharCount_lbl0) { lbl_0ValueInWords.setText(sentence.substring(0, CharCount_lbl0)); if (SentenceLength > CharCount_lbl0 + CharCount_lbl1) { lbl_1ValueInWords.setText(sentence.substring(CharCount_lbl0, CharCount_lbl0 + CharCount_lbl1)); lbl_2ValueInWords.setText(sentence.substring(CharCount_lbl0 + CharCount_lbl1, SentenceLength)); } else { lbl_1ValueInWords.setText(sentence.substring(CharCount_lbl0, SentenceLength)); } } else { lbl_0ValueInWords.setText(sentence); } But even after resetting font size sometimes the last character goes out of the display range. I have removed margines from the jlabels that may cause this. This happens for random length sentences. I can solve the problem for the application by reducing label width used for the calculations(hopefully) Can anyone explain me the reason? Could be because of some defect in the fonts symmetry?

  Read the article

• ASP.NET MVC: How can I explain an invalid type violation to an end-user with Html.ValidationSummary?

  - by Terminal Frost

  Serious n00b warning here; please take mercy! So I finished the Nerd Dinner MVC Tutorial and I'm now in the process of converting a VB.NET application to ASP.NET MVC using the Nerd Dinner program as a sort of rough template. I am using the "IsValid / GetRuleViolations()" pattern to identify invalid user input or values that violate business rules. I am using LINQ to SQL and am taking advantage of the "OnValidate()" hook that allows me to run the validation and throw an application exception upon trying to save changes to the database via the CustomerRepository class. Anyway, everything works well, except that by the time the form values reach my validation method invalid types have already been converted to a default or existing value. (I have a "StreetNumber" property that is an integer, though I imagine this would be a problem for DateTime or any other non-strings as well.) Now, I am guessing that the UpdateModel() method throws an exception and then alters the value because the Html.ValidationMessage is displayed next to the StreetNumber field but my validation method never sees the original input. There are two problems with this: While the Html.ValidationMessage does signal that something is wrong, there is no corresponding entry in the Html.ValidationSummary. If I could even get the exception message to show up there indicating an invalid cast or something that would be better than nothing. My validation method which resides in my Customer partial class never sees the original user input so I do not know if the problem is a missing entry or an invalid type. I can't figure out how I can keep my validation logic nice and neat in one place and still get access to the form values. I could of course write some logic in the View that processes the user input, however that seems like the exact opposite of what I should be doing with MVC. Do I need a new validation pattern or is there some way to pass the original form values to my model class for processing? CustomerController Code // POST: /Customers/Edit/[id] [AcceptVerbs(HttpVerbs.Post)] public ActionResult Edit(int id, FormCollection formValues) { Customer customer = customerRepository.GetCustomer(id); try { UpdateModel(customer); customerRepository.Save(); return RedirectToAction("Details", new { id = customer.AccountID }); } catch { foreach (var issue in customer.GetRuleViolations()) ModelState.AddModelError(issue.PropertyName, issue.ErrorMessage); } return View(customer); }

  Read the article

• Is "Systems Designer" the job title that best describes what I do? [closed]

  - by ivo-rossi

  After having worked as Java developer for almost 3 years in the same company that I currently work at, I moved to a new position associated with the development of the same application. I’m in this new position for more than 1 year now. My official job title is Systems Designer, but I’m not sure this is a title that expresses well what I do. So my question here is what would be the most appropriate job title for me? I see this question as important for my career development. After all, I should be able to explain in one word what I do. And it’s no longer “Java Developer”. Well, in more than one word, this is what I do: The business analysts gather requirements / business problems to be solved with the clients and then discuss these requirements with me. Given the requirements, I design the high level solutions to be implemented in our system (e.g. a new screen on the client application, modifications to existing reports, extension to the XML export format of some objects, etc). I base my decision on the current capabilities of the system, the overall impact that the solutions would have on the system and the estimated effort to implement them (as I was a developer of this same application for almost 3 years before I moved to this position, I’m confident in my estimates). The solutions are discussed iteratively with the business analysts until we agree that they are good. The outcome of this analysis is what we call the “requirements design” document, which is written by me, shared with clients for approval and then also with the team that is going to implement the solutions and test them. Note that there are a few problems that I need to find a solution for that are non-functional. If the users are unhappy with the performance of a certain tool, I will investigate what can be done to speed it up. I will do some research – often based in the Java code itself - to identify possibilities of optimizations. But in this new position I no longer code, the main outcome of my work is really the “requirements design”. Is “Systems Designer” really the most appropriate job title?

  Read the article

• Can this be imporved? Scrubing of dangerous html tags.

  - by chobo2

  Hi I been finding that for something that I consider pretty import there is very little information or libraries on how to deal with this problem. I found this while searching. I really don't know all the million ways that a hacker could try to insert the dangerous tags. I have a rich html editor so I need to keep non dangerous tags but strip out bad ones. So is this script missing anything? It uses html agility pack. public string ScrubHTML(string html) { HtmlDocument doc = new HtmlDocument(); doc.LoadHtml(html); //Remove potentially harmful elements HtmlNodeCollection nc = doc.DocumentNode.SelectNodes("//script|//link|//iframe|//frameset|//frame|//applet|//object|//embed"); if (nc != null) { foreach (HtmlNode node in nc) { node.ParentNode.RemoveChild(node, false); } } //remove hrefs to java/j/vbscript URLs nc = doc.DocumentNode.SelectNodes("//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'javascript')]|//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'jscript')]|//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'vbscript')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.SetAttributeValue("href", "#"); } } //remove img with refs to java/j/vbscript URLs nc = doc.DocumentNode.SelectNodes("//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'javascript')]|//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'jscript')]|//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'vbscript')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.SetAttributeValue("src", "#"); } } //remove on<Event> handlers from all tags nc = doc.DocumentNode.SelectNodes("//*[@onclick or @onmouseover or @onfocus or @onblur or @onmouseout or @ondoubleclick or @onload or @onunload]"); if (nc != null) { foreach (HtmlNode node in nc) { node.Attributes.Remove("onFocus"); node.Attributes.Remove("onBlur"); node.Attributes.Remove("onClick"); node.Attributes.Remove("onMouseOver"); node.Attributes.Remove("onMouseOut"); node.Attributes.Remove("onDoubleClick"); node.Attributes.Remove("onLoad"); node.Attributes.Remove("onUnload"); } } // remove any style attributes that contain the word expression (IE evaluates this as script) nc = doc.DocumentNode.SelectNodes("//*[contains(translate(@style, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'expression')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.Attributes.Remove("stYle"); } } return doc.DocumentNode.WriteTo(); }

  Read the article

• Why are static classes considered “classes” and “reference types”?

  - by Timwi

  I’ve been pondering about the C# and CIL type system today and I’ve started to wonder why static classes are considered classes. There are many ways in which they are not really classes: A “normal” class can contain non-static members, a static class can’t. In this respect, a class is more similar to a struct than it is to a static class, and yet structs have a separate name. You can have a reference to an instance of a “normal” class, but not a static class (despite it being considered a “reference type”). In this respect, a class is more similar to an interface than it is to a static class, and yet interfaces have a separate name. The name of a static class can never be used in any place where a type name would normally fit: you can’t declare a variable of this type, you can’t use it as a base type, and you can’t use it as a generic type parameter. In this respect, static classes are somewhat more like namespaces. A “normal” class can implement interfaces. Once again, that makes classes more similar to structs than to static classes. A “normal” class can inherit from another class. It is also bizarre that static classes are considered to derive from System.Object. Although this allows them to “inherit” the static methods Equals and ReferenceEquals, the purpose of that inheritance is questionable as you would call those methods on object anyway. C# even allows you to specify that useless inheritance explicitly on static classes, but not on interfaces or structs, where the implicit derivation from object and System.ValueType, respectively, actually has a purpose. Regarding the subset-of-features argument: Static classes have a subset of the features of classes, but they also have a subset of the features of structs. All of the things that make a class distinct from the other kinds of type, do not seem to apply to static classes. Regarding the typeof argument: Making a static class into a new and different kind of type does not preclude it from being used in typeof. Given the sheer oddity of static classes, and the scarcity of similarities between them and “normal” classes, shouldn’t they have been made into a separate kind of type instead of a special kind of class?

  Read the article

• Can this be improved? Scrubing of dangerous html tags.

  - by chobo2

  I been finding that for something that I consider pretty import there is very little information or libraries on how to deal with this problem. I found this while searching. I really don't know all the million ways that a hacker could try to insert the dangerous tags. I have a rich html editor so I need to keep non dangerous tags but strip out bad ones. So is this script missing anything? It uses html agility pack. public string ScrubHTML(string html) { HtmlDocument doc = new HtmlDocument(); doc.LoadHtml(html); //Remove potentially harmful elements HtmlNodeCollection nc = doc.DocumentNode.SelectNodes("//script|//link|//iframe|//frameset|//frame|//applet|//object|//embed"); if (nc != null) { foreach (HtmlNode node in nc) { node.ParentNode.RemoveChild(node, false); } } //remove hrefs to java/j/vbscript URLs nc = doc.DocumentNode.SelectNodes("//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'javascript')]|//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'jscript')]|//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'vbscript')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.SetAttributeValue("href", "#"); } } //remove img with refs to java/j/vbscript URLs nc = doc.DocumentNode.SelectNodes("//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'javascript')]|//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'jscript')]|//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'vbscript')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.SetAttributeValue("src", "#"); } } //remove on<Event> handlers from all tags nc = doc.DocumentNode.SelectNodes("//*[@onclick or @onmouseover or @onfocus or @onblur or @onmouseout or @ondoubleclick or @onload or @onunload]"); if (nc != null) { foreach (HtmlNode node in nc) { node.Attributes.Remove("onFocus"); node.Attributes.Remove("onBlur"); node.Attributes.Remove("onClick"); node.Attributes.Remove("onMouseOver"); node.Attributes.Remove("onMouseOut"); node.Attributes.Remove("onDoubleClick"); node.Attributes.Remove("onLoad"); node.Attributes.Remove("onUnload"); } } // remove any style attributes that contain the word expression (IE evaluates this as script) nc = doc.DocumentNode.SelectNodes("//*[contains(translate(@style, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'expression')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.Attributes.Remove("stYle"); } } return doc.DocumentNode.WriteTo(); }

  Read the article

• .NET threading: how can I capture an abort on an unstarted thread?

  - by Groxx

  I have a chunk of threads I wish to run in order, on an ASP site running .NET 2.0 with Visual Studio 2008 (no idea how much all that matters, but there it is), and they may have aborted-clean-up code which should be run regardless of how far through their task they are. So I make a thread like this: Thread t = new Thread(delegate() { try { /* do things */ System.Diagnostics.Debug.WriteLine("try"); } catch (ThreadAbortException) { /* cleanup */ System.Diagnostics.Debug.WriteLine("catch"); } }); Now, if I wish to abort the set of threads part way through, the cleanup may still be desirable later on down the line. Looking through MSDN implies you can .Abort() a thread that has not started, and then .Start() it, at which point it will receive the exception and perform normally. Or you can .Join() the aborted thread to wait for it to finish aborting. Presumably you can combine them. http://msdn.microsoft.com/en-us/library/ty8d3wta(v=VS.80).aspx To wait until a thread has aborted, you can call the Join method on the thread after calling the Abort method, but there is no guarantee the wait will end. If Abort is called on a thread that has not been started, the thread will abort when Start is called. If Abort is called on a thread that is blocked or is sleeping, the thread is interrupted and then aborted. Now, when I debug and step through this code: t.Abort(); // ThreadState == Unstarted | AbortRequested t.Start(); // throws ThreadStartException: "Thread failed to start." // so I comment it out, and t.Join(); // throws ThreadStateException: "Thread has not been started." At no point do I see any output, nor do any breakpoints on either the try or catch block get reached. Oddly, ThreadStartException is not listed as a possible throw of .Start(), from here: http://msdn.microsoft.com/en-us/library/a9fyxz7d(v=VS.80).aspx (or any other version) I understand this could be avoided by having a start parameter, which states if the thread should jump to cleanup code, and foregoing the Abort call (which is probably what I'll do). And I could .Start() the thread, and then .Abort() it. But as an indeterminate amount of time may pass between .Start and .Abort, I'm considering it unreliable, and the documentation seems to say my original method should work. Am I missing something? Is the documentation wrong? edit: ow. And you can't call .Start(param) on a non-parameterized Thread(Start). Is there a way to find out if a thread is parameterized or not, aside from trial and error? I see a private m_Delegate, but nothing public...

  Read the article

• Flex/Air/AS3 Selecting and Populating a unFocused tab.

  - by Deyon

  I'm having a problem displaying data from a function to text box within a tab. If you run the code and click "Select Tab 2 and Fill..." I get an error; "TypeError: Error #1009: Cannot access a property or method of a null object reference." I'm guessing this is because "Tab 2" is/was not rendered yet. Now if I run the code, select "Tab 2" then select "Tab 1" and click "Select Tab 2 and Fill..." it works the way I would like. Dose any one know a way around this problem. ----Full Flex 4/Flash Builder Code just copy paste---- <?xml version="1.0" encoding="utf-8"?> <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/halo" creationComplete=" "> <fx:Script> <![CDATA[ public function showtab2():void { mytextbox.text="I made it!"; tn.selectedIndex=1; } ]]> </fx:Script> <fx:Declarations> <!-- Place non-visual elements (e.g., services, value objects) here --> </fx:Declarations> <mx:Panel title="TabNavigator Container Example" height="90%" width="90%" paddingTop="10" paddingLeft="10" paddingRight="10" paddingBottom="10"> <mx:Label width="100%" color="blue" text="Select the tabs to change the panel."/> <mx:TabNavigator id="tn" width="100%" height="100%"> <!-- Define each panel using a VBox container. --> <mx:VBox label="Panel 1"> <mx:Label text="TabNavigator container panel 1"/> <mx:Button label="Select Tab 2 and Fill with Text" click="showtab2()"/> </mx:VBox> <mx:VBox label="Panel 2"> <mx:Label text="TabNavigator container panel 2"/> <s:TextInput id="mytextbox" /> </mx:VBox> </mx:TabNavigator> <mx:HBox> </mx:HBox> </mx:Panel> </s:WindowedApplication>

  Read the article

• Objective-C Basic class related question, retaining the value of a specific object using a class fil

  - by von steiner

  Members, scholars, code gurus. My background is far from any computer programming thus my question may seems basic and somewhat trivial to you. Nevertheless it seems that I can't put my head around it. I have googled and searched for the answer, just to get myself confused even more. With that, I would kindly ask for a simple explanation suitable for a non technical person such as myself and for other alike arriving to this thread. I have left a comment with the text "Here is the issue" below, referring to my question. // character.h #import <Foundation/Foundation.h> @interface character : NSObject { NSString *name; int hitPoints; int armorClass; } @property (nonatomic,retain) NSString *name; @property int hitPoints,armorClass; -(void)giveCharacterInfo; @end // character.m #import "character.h" @implementation character @synthesize name,hitPoints,armorClass; -(void)giveCharacterInfo{ NSLog(@"name:%@ HP:%i AC:%i",name,hitPoints,armorClass); } @end // ClassAtLastViewController.h #import <UIKit/UIKit.h> @interface ClassAtLastViewController : UIViewController { } -(void)callAgain; @end // ClassAtLastViewController.m #import "ClassAtLastViewController.h" #import "character.h" @implementation ClassAtLastViewController - (void)viewDidLoad { //[super viewDidLoad]; character *player = [[character alloc]init]; player.name = @"Minsc"; player.hitPoints = 140; player.armorClass = 10; [player giveCharacterInfo]; [player release]; // Up until here, All peachy! [self performSelector:@selector(callAgain) withObject:nil afterDelay:2.0]; } -(void)callAgain{ // Here is the issue, I assume that since I init the player again I loss everything // Q1. I loss all the data I set above, where is it than? // Q2. What is the proper way to implement this character *player = [[character alloc]init]; [player giveCharacterInfo]; } Many thanks in advance, Kindly remember that my background is more related to Salmons breeding than to computer code, try and lower your answer to my level if it's all the same to you.

  Read the article

• What is GC holes?

  - by tianyi

  I wrote a long TCP connection socket server in C#. Spike in memory in my server happens. I used dotNet Memory Profiler(a tool) to detect where the memory leaks. Memory Profiler indicates the private heap is huge, and the memory is something like below(the number is not real,what I want to show is the GC0 and GC2's Holes are very very huge, the data size is normal): Managed heaps - 1,500,000KB Normal heap - 1400,000KB Generation #0 - 600,000KB Data - 100,000KB "Holes" - 500,000KB Generation #1 - xxKB Data - 0KB "Holes" - xKB Generation #2 - xxxxxxxxxxxxxKB Data - 100,000KB "Holes" - 700,000KB Large heap - 131072KB Large heap - 83KB Overhead/unused - 130989KB Overhead - 0KB Howerver, what is GC hole? I read an article about the hole: http://kaushalp.blogspot.com/2007/04/what-is-gc-hole-and-how-to-create-gc.html The author said : The code snippet below is the simplest way to introduce a GC hole into the system. //OBJECTREF is a typedef for Object*. { PointerTable *pTBL = o_pObjectClass->GetPointerTable(); OBJECTREF aObj = AllocateObjectMemory(pTBL); OBJECTREF bObj = AllocateObjectMemory(pTBL); //WRONG!!! “aObj” may point to garbage if the second //“AllocateObjectMemory” triggered a GC. DoSomething (aOb, bObj); } All it does is allocate two managed objects, and then does something with them both. This code compiles fine, and if you run simple pre-checkin tests, it will probably “work.” But this code will crash eventually. Why? If the second call to “AllocateObjectMemory” triggers a GC, that GC discards the object instance you just assigned to “aObj”. This code, like all C++ code inside the CLR, is compiled by a non-managed compiler and the GC cannot know that “aObj” holds a root reference to an object you want kept live. ======================================================================== I can't understand what he explained. Does the sample mean aObj becomes a wild pointer after GC? Is it mean { aObj = (*aObj)malloc(sizeof(object)); free(aObj); function(aObj);? } ? I hope somebody can explain it.

  Read the article

• How do I make a full screen scrolling messagebox or window?

  - by chobo2

  Hi First let me start of saying I know absolutely nothing about c++ and I am really just more interested in getting this to work then learning c++(I got enough on my plate to learn). So basically I am trying to make a terms of service for my windows mobile 6 professional application but it seems I need to use c++ to do it. After hours of searching I found a solution but it developed for windows mobile standard. So they somehow used c++ to make a message box and on standard devices(ie non touch screen phones) the message box can have like scrolling. For some reason this is not the case with professional devices(touch screen devices). So my message box goes off the page and you can never accept or decline the terms. So your stuck and on the screen forever till you do some sort of soft restart. http://www.mobilepractices.com/2008/10/setupdll-sample-and-walkthrough-terms.html The above link is the tutorial but here is the actual file that seems to display the message. #include "stdafx.h" #include "ce_setup.h" // This is a variable containing the text to be displayed // in the Terms & Conditions dialog TCHAR Message[] = _T("TERMS & CONDITIONS\r\n ") _T("Selecting YES you're accepting our terms & conditions.\r\n") _T("This is just a sample application.\r\n") _T("From http://www.mobilepractices.com\r\n") _T("You can replace this text with your own.\r\n") _T("We're using a setup.dll to show this dialog.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Last line.\r\n") ; // This function will be called when the user // tries to install the cab. According to its return // value the installation continues or is cancelled. // As this could be called more than once // (i.e. if there is not enough space on the target) // we should take care about fFirstCall parameter // to show the dialog only once. codeINSTALL_INIT Install_Init( HWND hwndParent, BOOL fFirstCall, BOOL fPreviouslyInstalled, LPCTSTR pszInstallDir ) { if (!fFirstCall || ::MessageBoxW(0, Message, _T("SplashScreenSample") , MB_YESNO) == IDYES) return codeINSTALL_INIT_CONTINUE; else return codeINSTALL_INIT_CANCEL; } So I want to change this to something that can scroll. Can I use like a panel control since I know what has scroll or something else? Thanks

  Read the article

• zlib gzgets extremely slow?

  - by monkeyking

  I'm doing stuff related to parsing huge globs of textfiles, and was testing what input method to use. There is not much of a difference using c++ std::ifstreams vs c FILE, According to the documentation of zlib, it supports uncompressed files, and will read the file without decompression. I'm seeing a difference from 12 seconds using non zlib to more than 4 minutes using zlib.h This I've tested doing multiple runs, so its not a disk cache issue. Am I using zlib in some wrong way? thanks #include <zlib.h> #include <cstdio> #include <cstdlib> #include <fstream> #define LENS 1000000 size_t fg(const char *fname){ fprintf(stderr,"\t-> using fgets\n"); FILE *fp =fopen(fname,"r"); size_t nLines =0; char *buffer = new char[LENS]; while(NULL!=fgets(buffer,LENS,fp)) nLines++; fprintf(stderr,"%lu\n",nLines); return nLines; } size_t is(const char *fname){ fprintf(stderr,"\t-> using ifstream\n"); std::ifstream is(fname,std::ios::in); size_t nLines =0; char *buffer = new char[LENS]; while(is. getline(buffer,LENS)) nLines++; fprintf(stderr,"%lu\n",nLines); return nLines; } size_t iz(const char *fname){ fprintf(stderr,"\t-> using zlib\n"); gzFile fp =gzopen(fname,"r"); size_t nLines =0; char *buffer = new char[LENS]; while(0!=gzgets(fp,buffer,LENS)) nLines++; fprintf(stderr,"%lu\n",nLines); return nLines; } int main(int argc,char**argv){ if(atoi(argv[2])==0) fg(argv[1]); if(atoi(argv[2])==1) is(argv[1]); if(atoi(argv[2])==2) iz(argv[1]); }

  Read the article

• Objective-C++ Memory Problem

  - by Stephen Furlani

  Hello, I'm having memory woes. I've got a C++ Library (Equalizer from Eyescale) and they use the Traversal Visitor Pattern to allow you to add new functionality to their classes. I've finally figured out how it works, and I've got a Visitor that just returns the properties from one of the objects. (since I don't know how they're allocated). so. My little code does this: VisitorResult AGLContextVisitor::visit( Channel* channel ) { // Search through Nodes, Pipes until we get to the right window. // Add some code to make sure we find the right one? // Not executing the following code as C++ in gdb? eq::Window* w = channel->getWindow(); OSWindow* osw = w->getOSWindow(); AGLWindow* aw = (AGLWindow *)osw; AGLContext agl_ctx = aw->getAGLContext(); this->setContext(agl_ctx); return TRAVERSE_PRUNE; } So here's the problem. eq::Window* w = channel->getWindow(); (gdb) print w 0x0 BUT If I do this: (gdb) set objc-non-blocking-mode off (gdb) print w=channel->getWindow() 0x300effb9 // an honest memory location, and sets w as verified in the Debugger window of XCode. It does the same thing for osw. I don't get it. Why would something work in (gdb) but not in the code? The file is completely a cpp file, but it seems to be running in objc++, since I need to turn blocking off. Help!? I feel like I'm missing some memory-management basic thing here, either with C++ or Obj-C. [edit] channel-getWindow() is supposed to do this: /** @return the parent window. @version 1.0 */ Window* getWindow() { return _window; } The code also executes fine if I run it from a C++-only application. [edit] No... I tried creating a simple stand-alone program since I was tired of running it as a plugin. Messy to debug. And no, it doesn't run in the C++ program either. So I'm really at a loss as to what I'm doing wrong. Thanks, -- Stephen Furlani

  Read the article

• Form validation with optional File Upload field callback

  - by MotiveKyle

  I have a form with some input fields and a file upload field in the same form. I am trying to include a callback into the form validation to check for file upload errors. Here is the controller for adding and the callback: public function add() { if ($this->ion_auth->logged_in()): //validate form input $this->form_validation->set_rules('title', 'title', 'trim|required|max_length[66]|min_length[2]'); // link url $this->form_validation->set_rules('link', 'link', 'trim|required|max_length[255]|min_length[2]'); // optional content $this->form_validation->set_rules('content', 'content', 'trim|min_length[2]'); $this->form_validation->set_rules('userfile', 'image', 'callback_validate_upload'); $this->form_validation->set_error_delimiters('<small class="error">', '</small>'); // if form was submitted, process form if ($this->form_validation->run()) { // add pin $pin_id = $this->pin_model->create(); $slug = strtolower(url_title($this->input->post('title'), TRUE)); // path to pin folder $file_path = './uploads/' . $pin_id . '/'; // if folder doesn't exist, create it if (!is_dir($file_path)) { mkdir($file_path); } // file upload config variables $config['upload_path'] = $file_path; $config['allowed_types'] = 'jpg|png'; $config['max_size'] = '2048'; $config['max_width'] = '1920'; $config['max_height'] = '1080'; $config['encrypt_name'] = TRUE; $this->load->library('upload', $config); // upload image file if ($this->upload->do_upload()) { $this->load->model('file_model'); $image_id = $this->file_model->insert_image_to_db($pin_id); $this->file_model->add_image_id_to_pin($pin_id, $image_id); } } // build page else: // User not logged in redirect("login", 'refresh'); endif; } The callback: function validate_upload() { if ($_FILES AND $_FILES['userfile']['name']): if ($this->upload->do_upload()): return true; else: $this->form_validation->set_message('validate_upload', $this->upload->display_errors()); return false; endif; else: return true; endif; } I am getting the error Fatal error: Call to a member function do_upload() on a non-object on line 92 when I try to run this. Line 92 is the if ($this->upload->do_upload()): line in the validate_upload callback. Am I going about this the right way? What's triggering this error?

  Read the article

• JSP to Bean to Java class Validation

  - by littlevahn

  I have a rather simple form in JSP that looks like this: <form action="response.jsp" method="POST"> <label>First Name:</label><input type="text" name="firstName" /><br> <label>Last Name:</label><input type="text" name="lastName" /><br> <label>Email:</label><input type="text" name="email" /><br> <label>Re-enter Email:</label><input type="text" name="emailRe" /><br> <label>Address:</label><input type="text" name="address" /><br> <label>Address 2:</label><input type="text" name="address2" /><br> <label>City:</label><input type="text" name="city" /><br> <label>Country:</label> <select name="country"> <option value="0">--Country--</option> <option value="1">United States</option> <option value="2">Canada</option> <option value="3">Mexico</option> </select><br> <label>Phone:</label><input type="text" name="phone" /><br> <label>Alt Phone:</label><input type="text" name="phoneAlt" /><br> <input type="submit" value="submit" /> </form> But when I try and access the value of the select box in my Java class I get null. Ive tried reading it in as a String and an Array of strings neither though seems to be grabbing the right value. The response.jsp looks like this: <%@ page language="java" %> <%@ page import="java.util.*" %> <%@page contentType="text/html" pageEncoding="UTF-8"%> <%! %> <jsp:useBean id="formHandler" class="validation.RegHandler" scope="request"> <jsp:setProperty name="formHandler" property="*" /> </jsp:useBean> <% if (formHandler.validate()) { %> <jsp:forward page="success.jsp"/> <% } else { %> <jsp:forward page="retryReg.jsp"/> <% } %> I already have Java script validation in place but I wanted to make sure I covered validation and checking for non-JS users. The RegHandler just uses the name field to refer to the value in the form. Any Idea how I could access the select box's value?

  Read the article

• Strategies for "Always-Connected" Windows Client Data Architecture

  - by magz2010

  Hi. Let me start by saying: this is my 1st post here, this is a bit lenghty, and I havent done Windows Forms development in years....with that in mind please excuse me if this isn't directly a programming question and please bear with me as I really need the help!! I have been asked to develop a Windows Forms app for our company that talks to a central (local area network) Linux Server hosting a PostgreSQL database. The app is to allow users to authenticate themselves into the system and thereafter conduct the usual transactions with the PG database. Ordinarily, I would propose writing a webforms app against Mono, but the clients need to utilise local resources such as USB peripheral devices, so that is out of the question. While it might not seem clear, my questions are italised below: Dilemma #1: The application is meant to be always connected. How should I structure my DAL/BLL - Should this reside on the server or with the client? Dilemma #2: I have been reading up on Client Application Services (CAS), and it seems like a great fit for authentication, as everything is exposed via URIs. I know that a .NET Data Provider exists for PostgreSQL, but not too sure if CAS will all work on a Linux (Debian) server? Believe me, I would get my hands dirty and try myself, but I need to come up with a logical design first before resources are allocated to me for "trial purposes"! Dilemma #3: If the DAL/BLL is to reside on the server, is there any way I can create data services, and expose only these services to authenticated clients. There is a (security) requirement whereby a connection string with username and password to the database cannot be present on any client machines...even if security on the database side is quite rigid. I'm guessing that the only way for this to work would be to create the various CRUD data service methods that are exposed by an ASP.NET app, and have the WindowsForms make a request for data or persist data to the ASP.NET app (thru a URI) and have that return a resultset or value. Would I be correct in assuming this? Should I be looking into WCF Data Services? and will WCF work with a non-SQL Server database? Thank you for taking the time out to read this, but know that I am desperately seeking any advice on this! THANKS A MILLION!!!!

  Read the article

• python object to native c++ pointer

  - by Lodle

  Im toying around with the idea to use python as an embedded scripting language for a project im working on and have got most things working. However i cant seem to be able to convert a python extended object back into a native c++ pointer. So this is my class: class CGEGameModeBase { public: virtual void FunctionCall()=0; virtual const char* StringReturn()=0; }; class CGEPYGameMode : public CGEGameModeBase, public boost::python::wrapper<CGEPYGameMode> { public: virtual void FunctionCall() { if (override f = this->get_override("FunctionCall")) f(); } virtual const char* StringReturn() { if (override f = this->get_override("StringReturn")) return f(); return "FAILED TO CALL"; } }; Boost wrapping: BOOST_PYTHON_MODULE(GEGameMode) { class_<CGEGameModeBase, boost::noncopyable>("CGEGameModeBase", no_init); class_<CGEPYGameMode, bases<CGEGameModeBase> >("CGEPYGameMode", no_init) .def("FunctionCall", &CGEPYGameMode::FunctionCall) .def("StringReturn", &CGEPYGameMode::StringReturn); } and the python code: import GEGameMode def Ident(): return "Alpha" def NewGamePlay(): return "NewAlpha" def NewAlpha(): import GEGameMode import GEUtil class Alpha(GEGameMode.CGEPYGameMode): def __init__(self): print "Made new Alpha!" def FunctionCall(self): GEUtil.Msg("This is function test Alpha!") def StringReturn(self): return "This is return test Alpha!" return Alpha() Now i can call the first to functions fine by doing this: const char* ident = extract< const char* >( GetLocalDict()["Ident"]() ); const char* newgameplay = extract< const char* >( GetLocalDict()["NewGamePlay"]() ); printf("Loading Script: %s\n", ident); CGEPYGameMode* m_pGameMode = extract< CGEPYGameMode* >( GetLocalDict()[newgameplay]() ); However when i try and convert the Alpha class back to its base class (last line above) i get an boost error: TypeError: No registered converter was able to extract a C++ pointer to type class CGEPYGameMode from this Python object of type Alpha I have done alot of searching on the net but cant work out how to convert the Alpha object into its base class pointer. I could leave it as an object but rather have it as a pointer so some non python aware code can use it. Any ideas?

  Read the article

• How to compute a unicode string which bidirectional representation is specified?

  - by valdo

  Hello, fellows. I have a rather pervert question. Please forgive me :) There's an official algorithm that describes how bidirectional unicode text should be presented. http://www.unicode.org/reports/tr9/tr9-15.html I receive a string (from some 3rd-party source), which contains latin/hebrew characters, as well as digits, white-spaces, punctuation symbols and etc. The problem is that the string that I receive is already in the representation form. I.e. - the sequence of characters that I receive should just be presented from left to right. Now, my goal is to find the unicode string which representation is exactly the same. Means - I need to pass that string to another entity; it would then render this string according to the official algorithm, and the result should be the same. Assuming the following: The default text direction (of the rendering entity) is RTL. I don't want to inject "special unicode characters" that explicitly override the text direction (such as RLO, RLE, etc.) I suspect there may exist several solutions. If so - I'd like to preserve the RTL-looking of the string as much as possible. The string usually consists of hebrew words mostly. I'd like to preserve the correct order of those words, and characters inside those words. Whereas other character sequences may (and should) be transposed. One naive way to solve this is just to swap the whole string (this takes care of the hebrew words), and then swap inside it sequences of non-hebrew characters. This however doesn't always produce correct results, because actual rules of representation are rather complex. The only comprehensive algorithm that I see so far is brute-force check. The string can be divided into sequences of same-class characters. Those sequences may be joined in random order, plus any of them may be reversed. I can check all those combinations to obtain the correct result. Plus this technique may be optimized. For instance the order of hebrew words is known, so we only have to check different combinations of their "joining" sequences. Any better ideas? If you have an idea, not necessarily the whole solution - it's ok. I'll appreciate any idea. Thanks in advance.

  Read the article

• Is this postgres function cost efficient or still have to clean

  - by kiranking

  There are two tables in postgres db. english_all and english_glob First table contains words like international,confidential,booting,cooler ...etc I have written the function to get the words from english_all then perform for loop for each word to get word list which are not inserted in anglish_glob table. Word list is like I In Int Inte Inter .. b bo boo boot .. c co coo cool etc.. for some reason zwnj(zero-width non-joiner) is added during insertion to english_all table. But in function I am removing that character with regexp_replace. Postgres function for_loop_test is taking two parameter min and max based on that I am selecting words from english_all table. function code is like DECLARE inMinLength ALIAS FOR $1; inMaxLength ALIAS FOR $2; mviews RECORD; outenglishListRow english_word_list;--custom data type eng_id,english_text BEGIN FOR mviews IN SELECT id,english_all_text FROM english_all where wlength between inMinLength and inMaxLength ORDER BY english_all_text limit 30 LOOP FOR i IN 1..char_length(regexp_replace(mviews.english_all_text,'(?)$','')) LOOP FOR outenglishListRow IN SELECT distinct on (regexp_replace((substring(mviews.english_all_text from 1 for i)),'(?)$','')) mviews.id, regexp_replace((substring(mviews.english_all_text from 1 for i)),'(?)$','') where regexp_replace((substring(mviews.english_all_text from 1 for i)),'(?)$','') not in(select english_glob.english_text from english_glob where i=english_glob.wlength) order by regexp_replace((substring(mviews.english_all_text from 1 for i)),'(?)$','') LOOP RETURN NEXT outenglishListRow; END LOOP; END LOOP; END LOOP; END; Once I get the word list I will insert that into another table english_glob. My question is is there any thing I can add to or remove from function to make it more efficient. edit Let assume english_all table have words like footer,settle,question,overflow,database,kingdom If inMinLength = 5 and inmaxLength=7 then in the outer loop footer,settle,kingdom will be selected. For above 3 words inner two loop will apply to get words like f,fo,foo,foot,foote,footer,s,se,set,sett,settl .... etc. In the final process words which are bold will be entered into english_glob with another parameter like 1 to denote it is a proper word and stored in the another filed of english_glob table. Remaining word will be stored with another parameter 0 because in the next call words which are saved in database should not be fetched again. edit2: This is a complete code CREATE TABLE english_all ( id serial NOT NULL, english_all_text text NOT NULL, wlength integer NOT NULL, CONSTRAINT english_all PRIMARY KEY (id), CONSTRAINT english_all_kan_text_uq_id UNIQUE (english_all_text) ) CREATE TABLE english_glob ( id serial NOT NULL, english_text text NOT NULL, is_prop integer default 1, CONSTRAINT english_glob PRIMARY KEY (id), CONSTRAINT english_glob_kan_text_uq_id UNIQUE (english_text) ) insert into english_all(english_text) values ('ant'),('forget'),('forgive'); on function call with parameter 3 and 6 fallowing rows should fetched a an ant f fo for forg forge forget next is insert to another table based on above row insert into english_glob(english_text,is_prop) values ('a',1),('an',1), ('ant',1),('f',0), ('fo',0),('for',1), ('forg',0),('forge',1), ('forget',1), on function call next time with parameter 3 and 7 fallowing rows should fetched.(because f,fo,for,forg are all entered in english_glob table) forgi forgiv forgive

  Read the article

• Poor performance / speed of regex with lookahead

  - by Hugo Zaragoza

  I have been observing extremely slow execution times with expressions with several lookaheads. I suppose that this is due to underlying data structures, but it seems pretty extreme and I wonder if I do something wrong or if there are known work-arounds. The problem is determining if a set of words are present in a string, in any order. For example we want to find out if two terms "term1" AND "term2" are somewhere in a string. I do this with the expresion: (?=.*\bterm1\b)(?=.*\bterm2\b) But what I observe is that this is an order of magnitude slower than checking first just \bterm1\b and just then \bterm2\b This seems to indicate that I should use an array of patterns instead of a single pattern with lookaheads... is this right? it seems wrong... Here is an example test code and resulting times: public static void speedLookAhead() { Matcher m, m1, m2; boolean find; int its = 1000000; // create long non-matching string char[] str = new char[2000]; for (int i = 0; i < str.length; i++) { str[i] = 'x'; } String test = str.toString(); // First method: use one expression with lookaheads m = Pattern.compile("(?=.*\\bterm1\\b)(?=.*\\bterm2\\b)").matcher(test); long time = System.currentTimeMillis(); ; for (int i = 0; i < its; i++) { m.reset(test); find = m.find(); } time = System.currentTimeMillis() - time; System.out.println(time); // Second method: use two expressions and AND the results m1 = Pattern.compile("\\bterm1\\b").matcher(test); m2 = Pattern.compile("\\bterm2\\b").matcher(test); time = System.currentTimeMillis(); ; for (int i = 0; i < its; i++) { m1.reset(test); m2.reset(test); find = m1.find() && m2.find(); } time = System.currentTimeMillis() - time; System.out.println(time); } This outputs in my computer: 1754 150

  Read the article

< Previous Page | 486 487 488 489 490 491 492 493 494 495 496 497  | Next Page >