Search Results

Search found 18860 results on 755 pages for 'enigma machine'.

Page 492/755 | < Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >

• Ubuntu SSH issue

  - by palani

  0 Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

  Read the article

• Maximum 5 minute battery life with Ubuntu 11.10 on HP laptop

  - by JamesG

  I apologise if this question is too similar to the numerous others already asked, but it seems that my difference in battery life is significantly more noticeable than others that have been reported. I recently installed Ubuntu 11.10 on my HP Pavilion dv6 laptop (which I purchased brand new just under one year ago). When running Windows 7 on this laptop, I have been able to get up to two and a half to three hours of battery life with wireless disabled and when running only Microsoft Word. However, when running Ubuntu, I am unable to use the laptop if it is not plugged in. Upon unplugging the fully-charged machine from the power cord, if I have wireless enabled, I immediately receive a notification that the battery levels are critically low and that shutdown is imminent. Even if I replace the power plug, the laptop shuts down within thirty seconds. If I disable wireless capability, I am able to run the laptop for an absolute maximum of five minutes on battery powers before receiving the same message. I have tried running with Jupiter on Power Saver mode, but to no noticeable effect. Ignoring the fact that I can't use my laptop without being attached to a power source, I really do enjoy using Ubuntu, and hence would greatly appreciate any help that can be offered.

  Read the article

• How to enable RDP to a Server 2008 R2 on another network? VM network

  - by Saariko

  I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

  Read the article

• DHCPPloc.exe or equivalent for Windows 7?

  - by Bart B

  There seems to be some DHCP funnyness going on so I need to run something to show me what's going at a DHCP level. Before I upgraded my machine to Windows 7 I used DHCPloc.exe from the Windows XP support tools, and it worked like a charm. I can't seem to find Support Tools for Windows 7, and trying to use the XP tools in compatibility mode doesn't work (I tried, it fails to open a receiving socket). I need a tool to monitor DHCP traffic, and ideally one that lets me filter it to exclude DHCP traffic from our trusted DHCP servers and only show me un-authorised DHCP traffic.

  Read the article

• What's the situation that requires stateful firewall?

  - by Eonil

  I just know there is two kind of firewalls. Stateless and stateful. It's hard to determine what kind of firewall I have to use. Currently I have to run firewall within same machine runs services, Basically I want stateless because of its less resource consumption. However if it is not sufficient for security, it's meaningless. I'll run HTTP, SSH, NFS (only over SSH), and some custom made server on several TCP/UDP ports. Should I use stateful firewall? (edit) Maybe the question can be assumed as 'Should I use stateful rules?'.

  Read the article

• The cd command using variable to mapped NFS volume within ssh in linux script is not working

  - by Bhavya Maheshwari

  I have to do the following from within a bash script. The /VMNFS/ folder is present on linux box, from where script is run, and is mapped to the machine into which i am ssh'ing, as an NFS at /vmfs/volumes/VMNFS/. The second cd command doesn't work, neither with symbolic path name nor physical pathname. Why? and How to rectify this? #!/bin/bash ssh -2 [email protected] /bin/sh <<\EOF vmfile_path=`grep / vmvar_file` datastore_path=/vmfs/volumes/VMNFS/ cd $datastore_path && echo "The present working directory is" `pwd -P` esxi_vmfile_path_sub=`pwd -P` && echo "variable value is" $esxi_vmfile_path_sub esxi_vmfile_path=`echo $vmfile_path | sed "s:/VMNFS:$esxi_vmfile_path_sub:"` cd "$esxi_vmfile_path" EOF ***Output***: The current working directory is /vmfs/volumes/65335ec4-46d12e41 variable value is /vmfs/volumes/65335ec4-46d12e41 can't cd to /vmfs/volumes/65335ec4-46d12e41/TPAE7.5/

  Read the article

• Dell Latitude E6420 dual-boot Ubuntu + Windows 7 Optimus graphics problems

  - by Ryan

  I have a Dell Latitude E6420 laptop with Ubuntu 12.04 alongside Windows 7 (dual-boot) docked in a docking station with 2 DVI outputs. It took me a week of tinkering to get the dual external monitors to work in Ubuntu, and I had to disabled the "Optimus" feature in the BIOS. But now neither external monitor is detected in Windows, and the resolution is also very low. Do you know how I can successfully dual-boot Windows 7 and Ubuntu on this machine using my 2 external DVI monitors? I have an open question here too, trying to resolve this same issue: http://askubuntu.com/questions/146933/dock-with-dual-external-dvi-monitors-with-intel-nvidia-optimus

  Read the article

• In Windows XP, is it possible to disable user credential caching for particular users

  - by kdt

  I understand that when windows caches user credentials, these can sometimes be used by malicious parties to access other machines once a machine containing cached credentials is compromised, a method known as "pass the hash"[1]. For this reason I would like to get control over what's cached to reduce the risk of cached credentials being used maliciously. It is possible to prevent all caching by zeroing HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\CachedLogonsCount, but this is too indiscriminate: laptops users need to be able to login when away from the network. What I would like to do is prevent the caching of credentials of certain users, such as administrators -- is there any way to do that in Windows XP? http://www.lbl.gov/cyber/systems/pass-the-hash.html

  Read the article

• Distributing application updates using SCCM 2007

  - by theraneman

  Hi all, If there are any System Center Config Manager (SCCM) users out there, please clarify my doubt here. I have used the ConfigMgr console to distribute a custom application to a client machine. Now I need to distribute some updated files of that application. Isnt's it possible to add those files in the same package source used earlier and advertise again? Or should I use the SCCM software update section for this? Not sure if its only me, but the Software distribution process looks much easier than the Software Updates process in SCCM 2007. Please do let me know if there any online tutorials which explain how to update a custom application. Any help much appreciated.

  Read the article

• Can't access network share with name defined in hosts file

  - by Einar Egilsson

  I have a network share on a machine that I can only reach by IP address. I then defined an alias for the IP in my hosts file so I could use that instead of the IP but then I can't log on to the share, I just get the logon prompt again and again. So basically this: \\172.17.0.48\SomeShare works but this \\myalias\SomeShare doesn't. myalias is defined in c:\windows\system32\drivers\etc\hosts as 172.17.0.48 myalias And I can use the alias for remote desktop without problems. Can anyone tell me why this doesn't work for fileshares?

  Read the article

• Executing EXE with wildcard from psexec

  - by Danny

  I'm writing a few scripts that I am using to integrate with bamboo for some continuous integration improvements and I've run into a bit of a snag. I'm currently trying to run a psexec command that installs the latest build on the remote machine but I dont necessary know the revision number. For example, the remote exe file could be Installer-3.1.xxxxx.exe where the xxxxx changes. I tried running the command with Installer-3.1.*.exe but it takes it as literal in Windows. I'm not overly familiar with Windows command prompt and am more used to Linux at this moment.

  Read the article

• How to disable shared folders passowrd prompt on window & Linux

  - by user53864

  I'm using windows xp, vista, server 2008 R2, ubuntu-linux 9.10, 9.04, 8.10 desktop editions. I shared some folders/directories in windows and in ubuntu machines. Normally for the first time it's prompted for the password when tried to access the shared folders on either of the machine and again they prompt for the password when the system is rebooted. Recently I've created a batch and sh script which copies from the shared folders from windows to ubuntu and vice-versa. But the scripts cannot automate the password prompt and I'm wondering if I could disable the password prompt of the shared folders on windows and as well as on ubuntu machines so that my script runs smoothly. I don't know if it's possible or not but want to confirm posting here and if it is then nothing but saying need help...!. Thanks all!

  Read the article

• Understanding why a 450W power supply is destroying my ATX motherboards but not mATX

  - by T. Webster

  Maybe I'm missing something really obvious here, but after going through 3 new motherboards in trying to build my new machine, I'm finally certain that the 450W power supply I bought has been destroying them. It seems like it should be simple: just connect the connectors where they fit and switch the thing on. But today after hooking it to my ASUS Sabertooth 990FX TUF Series Motherboard and switching it on, I could see and smell the smoke coming out of the motherboard. What I don't get is why I can hook this same 450W power supply up to my mATX motherboard and not run into the same problem. What am I missing here? Where on the box or manual is this? (I have 8x2 GB RAM, AMD FX-4100 3.6GHz CPU, 1 512MB ATI graphics card, 1 WD 7200 RPM SATA hard drive. )

  Read the article

• Tomcat 5.5 - second application returs 404

  - by Tomas Tintera

  There are two versions of web application. Want to have both on one machine so I can test upgrade. If there is one of them copied to Tomcat's webapplications directory and then Tomcat is started, it works fine. So if there is only have only ...webapplicatios\ROOT\... ...webapplicatios\myApp25\... it works fine. Or when there is only ...\webapps\ROOT\... ...\webapps\myApp26\... it works fine too. If I upload both ...\webapps\ROOT and ...\webapps\myApp25 ...\webapps\myApp26 only one of the apps will work. The other one returns 404, page not found. It's running on Windows7 and I use Tomcat 5.5. Tomcat is just default installation. Any idea what to check? How to make both running both apps? Thank you in advance for any help. I'm beginner regarding TC.

  Read the article

• Why is idle windows VM using so much CPU?

  - by Jeff Shattock

  I have 2 VMs running as guests on a KVM virtualization platform running on Ubuntu 10.04. One VM is an Ubuntu 10.04 system, the other is a Windows 7 system. When both machines are completely logged out, the Linux machine uses 1% CPU, the Windows one 45-50%, according to top. The graphs in virt-manager seem to back this up. Theres nothing installed on the Win7 image that would be running in the background; its as fresh as can be. Why is the Windows VM using so much more than the Linux VM, when both are logged out and idling?

  Read the article

• "ssh_exchange_identification: Connection closed by remote host lost connection" when running cron job

  - by grautur

  I have a Ruby script that connects to a remote machine via ssh and executes a command. The script runs fine when I just run it in my terminal. In my crontab, I have 1 * * * * /bin/bash -l -c 'ruby myfile.rb' and if I go ahead and run /bin/bash -l -c 'ruby myfile.rb', everything executes fine. But when cron itself executes the job, I get a ssh_exchange_identification: Connection closed by remote host error. What's the cause of this? How do I fix it?

  Read the article

• Where do Outlook folders go when moved?

  - by balexandre

  I have an account with external user mailboxes opened and accidentally I have moved a folder and now I can't find it anywhere. Action: I clicked on a folder and dragged it into another one. Result: Can't find the moved folder anywhere The above picture is the folders I currently have from my Outlook 2010 (via Exchange 2010), under an AD Network. Where can I (me, having admin rights over the network) retrieve that missing folder again? Attempts: The original and the one folder I need was accidentally moved, but I have created a poi folder and tried the same way, and I got the same result... the folder went missing. I also tried to reboot the client machine and access the same mailbox from OWA ... no luck on both attempts :( Any ideas on how I can retrieve the missing folder and its emails again?

  Read the article

• Which software to use for RAMDISK on Windows 2008?

  - by Tony_Henrich

  I am building a server machine with lots of RAM. At least 16G. I am planning to put my frequently read and written data in RAM so I am looking for software for creating RAM disks. This is for Windows Server 2008 R2 Standard 64bit. Any recommendations? I would like one where I can flush the disk image into persistent storage upon demand. For example when Windows shuts down. (I am aware of all the consequences of data loss when power is lost)

  Read the article

• Online Windows Server Virtual Hard Drive Images for Use with VMWare Server 1.0

  - by charfeddine.ahmed

  Hello there, I have a remote Server running the VMWare hypervisor. I want to create a virtual machine running Windows Server. However I can't upload mine since my internet connection is slow (would take me days to do the upload). Microsoft has public hard drive images with Windows Server Trial on them, but they work for Virtual PC. I am looking for such files that can be used with VMWare Server. That case I can download these files directly to the server which enjoys a fast connection. Thanks in advance.

  Read the article

• DDRescue on Windows or another options like DDRescue for Windows

  - by Frank Thornton

  I have a drive with failed sectors ect... I can't image it with Acronis as it hangs. I can't with Knoppiz it hangs. CHKDSK hangs. I want to use DDRescure but I don't have any Linux boxes running at the moment. I could do is in a VM but that seems like it would be slow and problematic? Are there any ways I can data recovery this disk from my Windows machine or is there an ideal way to work with DDRescue on Windows?

  Read the article

• Enable Ctrl (or Alt) + arrow keys to mimic 'home' and 'end' functionality

  - by YuKagi

  I am a long time Mac user and I'm now using a Ubuntu machine for development, and while I'm more or less used to a lot of the keyboard shortcuts, one thing I can't get used to is using the 'Home' and 'End' keys to move around lines of text. On a Mac you use "Command + right arrow" to go to the end of a line and "Command + left arrow" to go to the beginning. Is there a way to enable this kind of functionality in Linux? I'm not sure if this would be considered remapping, keyboard shortcuts, or what...

  Read the article

• What would be a good topic for research on "edge of multiple processors / computers programming" topic?

  - by Kabumbus

  This is a subjective discussion so we can express our dreams and hopes here. A "topic" must be like a task with point to have as end result a software poduct. A "topic" must be mainly about "Software engineering", "Algorithm and data structure concepts" and perhaps "Design patterns". I mean let us try to look what is not already there? What can be developed in fiew month and give a breakthrue / start a new leap / show somethig not realized before in science of f multiple computers programming? What i see is already there: LAN / wire and other infrastractural programms for connecting on device level MPI/ Bit torrent/Jabber protocols / APIs / servers for messaging on top Boost and analogs on evry OS in most languages for multithreading there are lots of CUDA like on computer frameworks for fast calculating on computers GPUs What I personally do not see out there is a crossplatform framework for multiple processes interaction. Meaning one that would allow easy creation of multyple processes running in paralell inside one hoster app on one machine. In level not harder than needed for threads creation (so no seprate server apps - just one lib doing it all) Is there ny such lib and what can you propose for research topic?

  Read the article

• Is Lojack preinstalled on Dell's laptops?

  - by Blorgbeard

  I'm looking at buying a Dell Studio 15 or similar. Unfortunately, they all seem to come with Lojack software included and no option to take it out of the build. I really do not want this software installed on my laptop. It sounds really abusable, and hard to get rid of once installed - it hides in your BIOS and survives reinstalls, etc. Does anyone know whether Lojack comes preinstalled on this machine, or if they just ship you a disc, which could subsequently be broken in half and/or microwaved into submission?

  Read the article

• Best Usage of Multiple Computers For a Developer

  - by whaley

  I have two Macbook Pros - both are comparable in hardware. One is a 17" and the other a 15". The 17" has a slightly swifter CPU clock speed, but beyond that the differences are completely negligible. I tried a setup a while back where I had the 17" hooked up to an external monitor in the middle of my desk with the 15" laptop immediately to the right of it, and was using teleport to control the 15" from my 17". All development, terminal usage, etc. etc. was being done on the 17" and the 15" was primarily used for email / IM / IRC... or anything secondary to what I was working on. I have a MobileMe account so preferences were synced, but otherwise I didn't really use anything else to keep the computers in sync (I use dropbox/git but probably not optimally). For reasons I can't put my finger on, this setup never felt quite right. A few things that irked me was the 15" was way under-utlized and the 17" was overutilized having 2 laptops and a 21" monitor all on one desk actually took up lots of desk space and it felt like I had too much to look at. I reverted back to just using the 17" and the external monitor and keeping the 15" around the house (and using it very sparingly). For those of you who are using multiple laptops (or just multiple machines for that matter), I'd like to see setups that work for you for when you have 2 or more machines that gives you optimal productivity and why. I'd like to give this one more shot but with a different approach than my previous - which was using the 15" as a machine for secondary things (communication, reading documentation, etc. etc).

  Read the article

• Am I an idealist?

  - by ereOn

  This is not only a question, this is also a call for help. Since I started my career as a programmer, I always tried to learn from my mistakes. I worked hard to learn best-practices and while I don't consider myself a C++ expert, I still believe I'm not a beginner either. I was recently hired into a company for C++ development. There I was told that my way to work was "against the rules" and that I would have to change my mind. Here are the topics I disagree with my hierarchy (their words): "You should not use separate header files for your different classes. One big header file is both easier to read and faster to compile." "Trying to use different headers is counter-productive : use the same super-set of headers everywhere, and enforce the use #pragma hdrstop to hasten compilation" "You may not use Boost or any other library that uses nested directories to organize its files. Our build-machine doesn't work with nested directories. Moreover, you don't need Boost to create great software." One might think I'm somehow exaggerated things, but the sad truth is that I didn't. That's their actual words. I believe that having separate files enhance maintainability and code-correctness and can fasten compilation time by the use of the proper includes. Have you been in a similar situation? What should I do? I feel like it's actually impossible for me to work that way and day after day, my frustration grows.

  Read the article

< Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499  | Next Page >