Search Results

Search found 16417 results on 657 pages for 'computer linguist'.

Page 496/657 | < Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >

  • After installing Windows 8, boot hangs before BIOS setup

    - by Joe Purvis
    I have an Alienware M15x, 940MX processor, 16 GB RAM, 512GB M4 SSD, and I was running Win7 64bit. I backed up the disk and ran Win 8 setup. Setup appeared to go well through multiple reboots. After the last reboot, it simply stopped after POST at "Press F2 for bios setup". I have tried powering off, reducing RAM to one stick, removing MOS battery. Now, it gets to the screen with "Press F2 for setup" and "Press F12 for boot options". If I press F2, I get a single beep only. If I press F12, nothing. I cannot get into the BIOS to change boot options to boot from another disk and restore. I do have the latest BIOS. I am going to try replacing the CMOS battery, but I don't think that is likely to help. The computer has been fast and very reliable until now.

    Read the article

  • Touchpad issues on HP Pavilion dm4 (can't right click)

    - by Habstinat
    Can anyone help me with my touchpad issues? I have a HP Pavilion dm4 and it has two areas on the bottom of the touchpad to designate right and left clicks. This mostly doesn't work on Ubuntu in the fact that it recognizes any taps on either tap zone as a left click. Instead, I have it set so if I tap anywhere on the pad it makes a left click. There should be, and there are, many ways in the mouse configuration window to simulate a right click using only a touchpad. None of these work. Changing mouse orientation doesn't do anything, "dwell click" also does nothing, and, the oddest part of this problem, whenever I try to turn "Simulated Secondary Click" off (it doesn't work anyways, but just to try to toggle it), the entire theme of my desktop changes to a gray Windows '95ey look. The only way to get rid of this is to close and reopen the mouse preferences window. My computer is fairly new and the Ubuntu installation is less than a day old. I didn't do anything that I think could cause this. The problem is that I can't right click. Help, please?s that I can't right click. Help, please? Afterword: I installed two scripts from http://sansmicrosoft.blogspot.com/2010/10/pavilion-dm4-1160-erratic-touchpad.html . They didn't do anything I couldn't already do, and they did not make it possible for me to right click. :(

    Read the article

  • Triggering GDM login on a remote machine

    - by creator
    I have to briefly describe the situation. We are planning to make a computer classroom with workstations running Ubuntu 10.04. Since making accounts for each student has not been considered reasonable, we decided to make accounts for each student group. We don't want students to share their passwords between groups so the solution would be not to give them passwords at all, but let the teacher log them in instead. Obviously he shouldn't go from one machine to another typing in credentials by hand, so we need some script that will connect to a remote machine by ssh and make GDM (or probably any other login manager if GDM cannot serve this purpose) log in specified user. I couldn't find any solutions, as well as I haven't noticed anybody in similar situation asking for help, so my question will be: can the scheme described be realized and if yes, then how? Thanks in advance.

    Read the article

  • All browsers hang on windows 7 in tab says 'Waiting for...' need restart

    - by Lakshmila
    I'm having a frustrating problem with browsers on OS windows 7 home premium. IE 10: My web browsing works ok for a while and then pages freeze and tab at top says "Waiting for ...' and never loads. Strangely I can still get to Google search results but if I click anything it freezes. Chrome freezes too and says 'The page has become unresponsive ...kill page' Safari stops also. I have tried clearing cookies, cache, turning off Bitdefender firewall and nothing apart from a restart fixes it. consequently I am forced to restart my computer several times a day to stop this browser hang. I have no idea what could be causing this ..any help greatly appreciated.

    Read the article

  • Can I use Server Monitor with a non-server Mac?

    - by Chris
    I have a computer I use as a simple file and web server. I am simply desiring to be able to monitor load, traffic, memory usage, etc via Server Monitor. I have also downloaded an app for my iPhone which does the same thing, but it uses the same protocol that Server Monitor does. Is it possible to get Server Monitor to recognize my non-server box as a server so I can monitor this information? For reference, I am running 10.4.ll on this PPC box. Thanks in advance!

    Read the article

  • Is there a word processor similar to MS Word which saves files as readable txt files?

    - by zenbomb
    I'm writing a paper together with my supervisor and would like to have a more sophisticated version control than *_291112_NEW_NEW_revised1.doc files. My supervisor is a non-computer person will never ever use LaTeX or git and loves MS Word. I'm therefore looking for an alternative to Word (I need commenting on text passages!) which stores the files as clean text (Markup for formating is fine), so I'm able to put them under version control on my side. I'm aware that git can also handle binary files, but I'd prefer the cleaner way of looking at the contents directly. If there's a way to automatically extract the text from word files, I'm fine with that too for now.

    Read the article

  • How can I change the default keyboard layout in Ubuntu 10.10?

    - by startoftext
    Ubuntu keeps detecting my keyboard layout as Romanian. It almost always does this on a reboot and some times on waking from sleep. Some times it just randomly changes back to Romanian while the computer is on. I always set it back to "USA" in the keyboard preferences and delete the Romanian layout. What files configure this in Ubuntu? I looked in xorg.conf and did not find any keyboard settings. How can I set this to USA permanently? I have a laptop with a typical US layout built in keyboard and I also have an apple keyboard that is also US layout connected via USB. I have run other distributions on this same setup before and never had this happen.

    Read the article

  • Software Error Basics

    Software Error Basics Who Causes Errors?   Software errors are caused by: ·    End-users ·    Programmers ·    Computer Systems   What Causes Errors?   Software errors are caused by: ·    Programmer Mistakes and Assumptions ·    Invalid data ·    Unexpected User Interactions ·    Missing Resources o  Files o  Databases o  Network Connectivity ·    Poor network connection ·    Insufficient Permissions   Where Do Errors Occur?   Software errors can occur anywhere code is executed:   ·    Desktop PC ·    Laptop PC ·    Server ·    Tablet PC ·    Mobile Phone ·    Any Device that can execute software   When Do Errors Occur?   Software errors occur when source code is being compiled (Compile-Time) or executed (Run-Time).  

    Read the article

  • Compatible case?

    - by Rick
    Hello everyone, first of all, I'm not sure where this question should go. So I've looked around and found the 'hardware' tag used in superuser.com please forgive me if I'm posting this on the wrong site. I'm new to the hardware part of computers. I've been looking around for a few months and now is the time to make my choice. I want to build my own computer and I think I got all the items I need. I want to know if the case and the motherboard I've chosen are compatible or if you could tell me how to check if they're compatible I want to know if they fit. Here's the motherboard/processor/memory package And this* is the case I'd like to fit it in. I'm sure that all the other stuff I might need I have with me already. Thanks in advance -Rick *See my comment, I may not post two hyperlinks due to spam protection

    Read the article

  • how can I get rid of duplicate administrators on 2 macbook pro's

    - by BCITY
    I got a new MacBook Pro (insurance payout) and passed my old one (previous generation MacBookPro 2008) on to a staff member whose MacBook Pro died. I used carbon copy to move my data to the new laptop but couldn't do the same with her move as the older Macbook wouldn't allow it as it was on an old OS. Ended up just migrating her software onto my old MBP. Now however, they both have the same admin identities and her computer is synching with my mobile me account. Can I change the administrator identity and save all her applications? I am hoping that I don't have to wipe and reinstall everything to change her computers identity.

    Read the article

  • Run a service after networking is ready on Ubuntu?

    - by TK Kocheran
    I'm trying to start a service that depends on networking being started, whenever the computer is rebooted. I have a few questions: Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works. I've seen the new Upstart service, but as far as how that actually works, I'm completely in the dark. How can I make a script that runs on boot which runs after networking has been started? If I could run it after connected to wireless network, even better :)

    Read the article

  • Windows 8.1 keeps prompting for Network Share Credentials after every log on or restart

    - by Peret del Trunfa
    I have a Network drive Shared in a Workgroup with 3 clients. Two clients with Windows 7 have persistent connections to the Share. No issues with those two. My windows 8.1 client keeps prompting for credentials at every restart / log on. I spent hours looking around for a solution: I have stored cred in cred manager, and tried every possible combination (WORKGROUP\user , COMPUTERNAME\user, user, .. and so on). I have changed NT and NTLM negotiation in policy manager. I've compared the settings under GPO network security with a working win 7 computer, everything is pretty much the same. -I've captured Wireshark to see SMB negotiation process, honestly I see the messages flowing around, and the share sending AUTH DENIED.. which means is how the 8.1 client formats the request.... that makes the share reject it.. Now I still don't really know why. Any ideas would be appreciated.

    Read the article

  • Not possible to extract tar.gz archive in Centos

    - by Petuga
    I have just uploaded tar.gz archive to my Centos server from my home Windows 7 computer. Before that, it was extracted from .zip archive. When I try to extract it: tar -xvf file.tar.gz gunzip file.tar.gz It always give me error: "not in gzip format" The archive is not corrupted, because it is possible to extract it in Windows with Winrar. The archive is quite big, more than 100 MB. I don't know, what's the problem. Could you help me please? Thanks. Peter

    Read the article

  • How to enable winhlp on Windows7 64bit?

    - by BGM
    Salvete! I just discovered that winhlp32.exe won't run on Windows7 64bit. I can't run the application, and I can't run hlp files either (but .chm files run fine). How do I make this work? I have downloaded the Microsoft fix here and restarted my computer, but to no avail. I can see the file winhlp32.exe in my c:\windows directory, but cannot run it. When I do run it, I get Windows' own "Help and Support" entitled, "Why can't I get Help from this program?" which sends me to the link above! How can I make it work?

    Read the article

  • Black screen with cursor after BIOS screen

    - by Radio
    Here is a weird one, Got computer with Windows XP. It's getting stuck on a black screen with cursor blinking. What did I do: - Boot from installation CD (recovery option - command line): chkdsk C: /R copy D:\i386\ntdetect.com c:\ copy D:\i386\ntldr c:\ fixmbr fixboot Chkdsk showed 0 bad sectors and no problems during scan. dir on C:\ shows all directories and files in place (Windows, Program Files, Documents and Settings). BIOS shows correct boot drive. Still does not boot. Not sure what to think of. Please help. UPDATE: Just performed these steps: Backed up current disk C: (without MBR) using True Image to external hard drive Ran Windows XP clean installation with deleting all partitions and creating new one. Hard drive booted fine into Windows GUI installation!!! Then: I interrupted installation. Booted from True Image recovery CD and restored archive of disk C to an new partition. Same issue with black screen.

    Read the article

  • Any way to tell apart a CPU defect from a mainboard defect?

    - by Pekka
    I have a fairly modern desktop computer, an AMD Athlon II X2 based silent PC, that does not work. When turned on, it will start physically (all fans are rotating, disks start up...) but not give a signal on any of the graphics ports (DVI, VGA, and HDMI, I tried all three). Also, the reset button does not seem to have any effect. I have stripped the mainboard bare of all SATA connections, extension cards, and the one 2GB RAM chip to eliminate them as the problem source, but to no avail, so I think it's fair to assume it's either the mainboard or the processor that are at fault. However, I have neither a replacement mainboard, nor a replacement processor handy to identify which one is broken. The cause of the defect is unknown, so for all I know, it could be both. Therefore, I'm reluctant to buy replacement hardware blindly before knowing more. Is there any way to further diagnose (or at least get some indication) which component is broken without buying replacement hardware?

    Read the article

  • Ubuntu 11.10 very slow compared to Windows

    - by Patrick
    I'm new to Ubuntu/linux. Since my PC is very old and not very fast with Windows 7, I decided to give Ubuntu a try, so I downloaded and installed Ubuntu 11.10 today. When I first started it, I had bad 800x600 resolution and it was very slow and annoying. So I installed a driver for my graphic card and now everything looks very nice (1280x1024).But I think it's still far slower than Windows 7. I tried to run in Ubuntu like a few people suggested on the forum but if I log in I get a black screen saying something like "this video mode cannot be displayed". I get that same screen when booting Ubuntu btw, but after about 15 seconds it disappears and just starts Ubuntu. I also installed other drivers for my graphic card but everything stayed the same. I noticed that i.e. when I open Firefox or system settings it takes about 5 seconds till it opens (while Windows 7 takes under 1 second to start i.e. Chrome) and when I do this my CPU usage gets to 100% for a short time. Computer specs: Memory: 2GB RAM Processor: Intel Pentium 4 2.8GHz Graphics Card: Nvidia GeForce 6800 400MHz. I read on various forums that 11.04 works flawless on many PCs, where 11.10 is very slow. Should I install 11.04 or could anybody help me with this problem?

    Read the article

  • Having an issue with Java/ minecraft (Windows 7 64bit)

    - by MetroGnome
    I have had issues with java on my computer for a while. First of all, java has never worked on Google Chrome or Firefox, Only IE. Whenever I need to use Java, I use IE. Now, I just tried to play minecraft the other week and I receive the error "fatal error (1)" and get a black screen (this is on the online free version). Now, I searched for java and found that I have Java 32 bit. I cannot uninstall it on Revo uninstaller or Windows uninstaller. What should I do?

    Read the article

  • can't delete files on Windows 7 (permission)

    - by lajos
    I updated my laptop from XP to Windows 7. There are some leftover files from XP on the computer now, when I try deleting them I get an error: You need permission to perform this action. You require permission from S-1-.... to make changes to this folder. What's weird is that I am logged in with the only user account on this machine and I have administrator privileges. I tried turning UAC off, but still can't delete the files. How can I force removal of these files?

    Read the article

  • How can I upgrade from Windows 8 x32 to x64 fastest & easiest?

    - by parkviewK
    I was upgrading the hardware in a family member's computer and purchased the Windows 8 upgrade for $40 from their website. Not thinking, after I installed it I realized I now have 32bit Windows on this 64bit capable machine. Did some research and it appears that the upgrade assistant just gives you whatever architecture you were uprgading from (windows 7 32bit). Question is, what is my best option here? I have already purchased a key, will this work on x64? I'm considering installing Windows 8 Preview x64 and upgrading from there, but not sure if that will work or if it will make me purchase it again.

    Read the article

  • Mouse selects everything on its own

    - by meneer
    I have a strange problem that my mouse keeps selecting everything I point to. For example, if I open Rhythmbox, then at the top of the screen there is a text which says which song is playing. If I move my mouse over this text, then it will select this text; but I am not clicking. This behaviour does not happen in all programs. For example in Firefox I have no problem at all. Maybe it is Gtk related? Nautilus also behaves strangely; I cannot open files by clicking on them, I have to select and make a box around the file and then press enter to open it. If I click, then nothing happens. Similar problems also happen with other Gtk software. I think the problem might be related to touchscreen issues (I have a touchscreen). I run Gnome 3 on Ubuntu 12.04. I have a HP touchsmart 610 desktop computer. Any help is greatly appreciated. UPDATE: I just did a fresh reinstall, and I am 90% certain that it is related to the touchscreen drivers. Here is what happens when I reinstall. At first boot, so exactly after install, everything works fine, except the touchscreen: The touchscreen does not respond. I update ubuntu, because I installed from an old CD (CD with ub. 12.04). Then on next reboot I have touchscreen working , but the working touchscreen comes together with the mouse selecting everything on its own. SECOND QUESTION: Would anybody know how I could figure out what those touchscreen drivers are (so that I can disable them) ?

    Read the article

  • Failing Seagate HDD - Not Recognised

    - by thefragileomen
    I am having a look at a friend's computer which contains a 500GB Seagate HDD. Unfortunately the HDD is not recognised by the BIOS menu and it beeps 11 times upon powerup. I've moved the HDD to another laptop but the problem remains. I've downloaded SeaTools for DOS (Seagate's Diagnostic tool) but unfortunately to no avail and the disc remains unseen when using this DOS boot disc. The HDD is only 6 months old so I'm very surprised at this but it appears a common problem with Seagate 2.5" HDDs as well as other HDDs manufactured by Seagate. I intend to try it in an external caddy on Thursday when back in work and also through a forensic writeblocker but just wondering if anyone has any other suggestions? I am of the opinion it is some chip on the HDD board which prevents it spinning due to a fault. If so, I've lost to deactivate this just so I can simply recover the data on the drive and start with a new disc. Thanks

    Read the article

  • nautilus will not start, no right click menu, apps will not run due to 64bit libicui18n.so.48 overwritten with 32bit, ubuntu 12.04

    - by Dewb
    yeah so i broke my system trying to install support for 32bit apps. Somehow the 32bit set of libicu*.so.48 files replaced my 64bit files and now nothing works. I know what the problem is and how to fix it , what i need is some help. I need some kind soul running a 64bit install of Ubuntu 12.04 to simply go into their /usr/lib dir and copy the files that have the form libicu*.so.48* (8 of them i think, maybe 16 i dunno how many there is supposed to be since they were overwritten). Anyway if you could put those files in an archive, zip or tar preferred and then email/share the link. I was able to get these files installed but they're from the latest edition of fedora and while i can now use my computer , it's not that stable things don't start right smoothly every time like they used to .... and well its a simple ordeal to put things back the way they were if someone wouldn't mind helping out. also any help setting up the libraries related to 32bit apps would be great as well as i apparently screwed that up royally. Thanks for any help or advice

    Read the article

  • Re: # 47209 How to copy an Existing HD to a new one and have it be bootable?

    - by user281151
    Help please! My backup method of choice is to clone my "working" drive to another identical drive. I have 2 windows drives and I clone my working one to the other one once per month. No problem - each will boot if I select it. Now with the lack of future support for XP, I am getting familiar with Ubuntu 14.04 LTS. I have it on one drive and I have a second identical drive that I want to be able to clone it to once/month. Not as necessary to do this with Ubuntu as with windows, I know, but I'm anal. So I have followed #47209 MestreLion's procedure with just the two Ubuntu drives "on line". I.e., boot my "working" drive with Live CD, use Gparted to be sure I know what's what, open terminal and enter and execute the dd command, Go to bed till the clone is done, shut down the computer, disconnect the input/source drive, boot up using BIOS to select the remaining output drive. The drive starts fine but all is not OK. It puts up a screen that says I'm on a Guest Session and asks for a password. Well, for one thing I have my Ubuntu set up to start without a password being entered. I have one, of course, I put it in but it isn't accepted. I can't get by this Guest Session screen. I am fine, of course. I can disconnect this drive, hook up my "main" ubuntu drive and all the rest, and go on with my business. But I don't have the desired "emergency backup" drive working where I could jump on and use it immediately if I needed it. Can someone give me some guidance here?? What (else) do I need to do. Love Ubuntu but learning. Thanks, Wes.

    Read the article

  • How do i keep a newly started program from taking focus?

    - by Jugglingnutcase
    Say i'm coding in emacs and want to start up a music program. Because it takes too long to start up i go back to coding and type away. When the music application starts up, the focus is stolen (gasp! stolen!) away from emacs and goes to the music application, often mid-thought. Is there any way to keep this from happening and have the newly started application not have focus until i see that it's up and ready to be used? Besides getting rid of my ADD of course. Or getting an impossibly fast computer that can keep up with my mind. i'm using a Windows XP system, but i will soon have a Windows 7 system, and i have Linux at home.

    Read the article

< Previous Page | 492 493 494 495 496 497 498 499 500 501 502 503  | Next Page >