Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 5/97 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Motherboard not recognizing memory anymore

  - by root

  I bought some new RAM and installed it on my motherboard. But, the BIOS would not post. There's an LED on my motherboard that shows error codes, and it showed the error: No usable memory detected. So, I removed the new memory and reinstalled the old memory, thus restoring the computer back to its original configuration. But, the BIOS still would not post, still giving the error: No usable memory detected. I've ensured that the memory and power headers are seated properly. I've tried all possible combinations of memory slots, and I've also reset the CMOS, but the error remains the same. The computer was working fine before I tried upgrading the memory, and I originally assembled the computer myself. What are some possible causes of this problem?

  Read the article

• Quiet volume on headphone jack on ASUS Eee 1005HA

  - by Bo Schatzberg

  I have an ASUS Eee 1005HA running Windows 7 Starter. The volume output of the headphone jack is extremely low. Otherwise, the speakers work fine. I downloaded and installed the most recent audio drivers (V6.0.1.5948) from ASUS but that did not resolve the issue. Any ideas?

  Read the article

• Asus Laptop camera PID code

  - by Littlet-ENG

  I just installed windows 7 on my daughters laptop. I want to make sure the on board web camera has the correct installed driver. Asus asks for a pid code? How do I find out what the pid code is? Asus f3ka laptop Any suggestions?

  Read the article

• Can't port forward ssh on Asus RT-NU56 wireless router

  - by Matt

  I cannot ssh in (using putty) when I use 10.0.1.31 as the address. database server - wired switch part of Asus wireless router - office LAN So basically, we want to ssh in to the database server from our computer on the wired office LAN. Asus router has an ip of 10.0.1.31 and database server has a static IP of 192.168.0.20 I set up port forwarding like this: ssh 22 192.168.0.20 22 BOTH Firewall is turned completely off. Any other settings I'm missing?

  Read the article

• New SSD freezing on older motherboard (intel G31)

  - by DJM

  I have an ECS G31T-M motherboard running a Core2 Quad processor, 4gb RAM, Windows 7 32bit, Geforce 9600GT. Bought a Sandisk Extreme III 120GB (SDSSDX-120G-G25) and installed today. I'm outputting this from my 9600GT with included TV-out adapter to Component video (to my HDTV). This motherboard is SATA 2 and from what I can tell, SSDs run on the IDE controller and there is nothing fancy to set up advanced features of SSDs. I've noticed on other forums (but not verifying with ECS) this board does not support AHCI. I have two versions of Windows 7 installed on two drives, the SSD and an old 500G disc drive. When booted from my older 500G HDD, video plays fine on the HDTV. When booting the SSD windows 7 install, I am freezing constantly, as in, video plays OK for a minute, then picture freezes for 1-3 minutes (sometimes as audio continues playing) and returns for 20-30 seconds before doing the same thing again. Other tasks such as basic maneuvering through file folders seems to be no problem. Please help!! Do I need a new system for this thing to work, or could there be other fixes? I updated firmware to R201 to no avail. DJM

  Read the article

• Motherboard running rather hot while gaming

  - by I take Drukqs

  Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

  Read the article

• Power supply switch like stays off motherboard light turns on

  - by Sion

  I bought a computer at the thrift store yesterday. The computer powered on without any error beeps. Getting it back to the house determined that the CD and hard drive needed to be changed. Put in a populated hard drive to check, the computer turned on and seemed to function. Put in a new CD drive, and just put in a new Hard drive. I plugged it in to check and I noticed that the light for the power supply switch did not come on. But I did notice that the light on the motherboard is lit. and I could not turn the computer on. To help troubleshoot it I unplugged the CD and Hard drive. then re-plugged the power supply and switched it on and off. Nothing changed. Parts: Motherboard: Digital Home PSW DH deluxe Power Supply: FSP-Group FX700-GLN Did I accidentally unplug something while installing the hard drive? Is the Power supply fried somehow?

  Read the article

• CPU not working on a specific motherboard

  - by Shaman

  I'm making a computer for someone and I met a weird problem. The CPU that I have doesn't work on this motherboard. The CPU is an Intel Pentium D 925 and the motherboard is an ECS G41T-M6, which in theory should work together. The only thing reused is the power source(400W). When I start the computer, the fans start, and that's it. The BIOS doesn't boot. I tried my own power source (600W Corsair) and nothing. Removed the RAM, no warning. In desperation I tried the last thing, swaped my own CPU with this one (Core2Duo E7200). Lo and behold, it worked. Both. The Core2Duo worked on the ECS with the old power source and the RAM that I used in the first place, and the Pentium D worked on my Gigabyte G31M-ES2L. What I discovered was that the Pentium D didn't receive power on the ECS, because I tried running it without the cooler and it remained at room temperature. On a side note, I also removed the HDDs just in case. So, in conclusion, any ideas? I can't return it, and I can still use it to upgrade another PC, but I would really prefer not to buy another CPU if possible.

  Read the article

• Intel Motherboard Lightning Victim Dies Hard

  - by Stetson RDT

  Today, I have a more hardware-related question. I have an Intel board, and I really do not know which board it is, I built the machine for a relative, but he forgot to keep the documentation. Long story short, the computer was disconnected during a lightning storm, but a lightning strike travelled in via the ethernet cable (It was directly connected to a power brick commonly seen on those long distance ISP Wireless transmitters), and the motherboard was shocked. I am attempting to get this PC going. The problem is as follows: The computer will randomly reboot, just in the middle of anything as it pleases. May load to EFI (or whatever BIOS is nowadays), may load to bootloader, may even get to the OS. But before 5 minutes is up, the system will always die. Out of curiosity, I plugged my voltmeter in to a molex connector. On the 5V side, it gets a good, consistant +5.13V. On the 12V side, it fluctuates, as follows: Upon immediate startup, it soars to 12.11-12.13V. It will now do one of two things: it will immediately jump down to 12.04-12.05V, or hover for about a minute at 12.11-12.13, then jump down. It seems the longer the voltage stays at 12.11-12.13, the shorter the machine will stay running. Also, post codes, whenever the machine locks up, but does not die hard, seem to be between "AA" and "AC". Does this make any sense to anybody? Do you all think this motherboard is salvageable? It was an expensive bugger, and I'd prefer to not replace it.

  Read the article

• Processor with higher FSB than motherboard can support.

  - by Wesley

  Hi all, Please redirect me if there is a similar question, but I have an ECS P4VXASD2+ (V5.0) motherboard, which supports a 533 MHz FSB. I want to put in a Pentium 4 3.2 GHz processor (Socket 478) with an FSB of 800 MHz. Would this be possible? Would the FSB of the processor just be limited to 533 MHz? Thanks in advance.

  Read the article

• Problems with chip fan and CPU fan

  - by JS Bangs

  I have a five-year-old ASUS motherboard that has been working fine for me for years, until I attempted to power it on yesterday and got a CPU fan speed and chip fan speed warning. Cracking open the case and powering the computer on, I can see the chip fan working, but it appears to be hitting something as it makes a very loud buzzing noise. The CPU fan, meanwhile, starts up when I power on, but slows down and stops after a few seconds! How can I address these problems? Is there any way to fix these sort of fan speed issues without just replacing the fan (which in the case of the chip fan, probably means replacing the whole motherboard)?

  Read the article

• Power problem or fried motherboard?

  - by Scott

  I was trying to adjust an antenna on a wireless card and ended up pulling the card loose. Now the computer won't turn on. Did i fry the motherboard?

  Read the article

• Processor with higher FSB than motherboard can support.

  - by Wesley

  Hi all, Please redirect me if there is a similar question, but I have an ECS P4VXASD2+ (V5.0) motherboard, which supports a 533 MHz FSB. I want to put in a Pentium 4 3.2 GHz processor (Socket 478) with an FSB of 800 MHz. Would this be possible? Would the FSB of the processor just be limited to 533 MHz? Thanks in advance.

  Read the article

• Broken Motherboard Trace

  - by CoffeeBean

  When you're fairly certain that a motherboard trace is broken near the CPU (i.e.: you suspect heatsink / fan was improperly inserted) is it advisable to attempt a repair? I've heard that it can be done using a substance for repairing embedded windshield defoggers. Has anyone had any experience with this?

  Read the article

• USB Ports not working on new ASUS Z87 PRO motherboard

  - by Peter Coulton

  3 of the six USB ports on the back on my new ASUS Z87 PRO motherboard are not functioning properly. They do seem to deliver power, just don't seem to function for data (devices attached in these ports are detected by windows, or usable in UEFI) I think I'm right in saying that the top 4 ports (3 of which aren't working) run off an additional USB controller (not from the Z87 chipset) if that makes any difference. I'm pretty sure that I'll just have to return it, but any advice on diagnosing the problem would be welcome.

  Read the article

• asus smartdotctor "can not find graphics card information"

  - by Trimack

  Hi, I am not sure that this is the place I can ask questions like this, but I'll give it a try. I have a Windows 7 64bit, new graphic card ASUS ENGTX260 MATRIX, installed latest graphics drivers nv19045_Win7Vista64 and ASUS Smart Doctor version 5.44. Unfortunately, after the required reboot when the smartdoctor is starting, I get an error "can not find graphics card information". I tried google, but none of that "run as admin"/"use compatibility" doesn't help. Perhaps here can I find my answers? Thanks in advance.

  Read the article

• Installing Windows 7 on an Asus EeePC 1008HA

  - by Keith

  I'm planning to install Windows 7 on my Asus EeePC 1008HA netbook. I heard that there were some issues with RC1, but other than that have not had much luck finding help with this specific hardware. The closest I've found is this article for the similar 1005HA. I can find XP drivers and have them downloaded just in case. Also (obviously) I've backed up everything on the machine. Anyone on here got any experience with Windows 7 on an Asus EeePC 1008HA? Anyone know whether the reported issues with RC1 have been fixed by the RTM and driver updates?

  Read the article

• ASUS P6X58D and 12 GB of RAM

  - by Hunter

  I just assembled my new PC and it screams, BUT it's only recognizing 8 GB of RAM in BIOS and OS rather than the installed 12 GB. In the BIOS the RAM was registering at 1066 MHz so I set it to 1600 MHz. I updated the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS: Windows 7 Ultimate 64-bit Motherboard: ASUS P6X58D Premium CPU: Intel Core i7 920 RAM: CORSAIR XMS3 12 GB (6 x 2 GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD: Intel 80 GB SSD SATA II Power supply: Kingwin 1000 W Modular I've installed the Beta BIOS 0808 but no luck!

  Read the article

• RAID driver to choose for slipstreaming XP installation on ASUS P5S800

  - by alex

  I'm trying to install Windows XP on my new SATA drive but I need to first slipstream the drivers with nLite. I've done this before, but not on an ASUS P5S800 - VM motherboard. I'm not used to the number of choices it gives me for drivers in SiS chipsets. When I look through the folder that I downloaded from ASUS for the RAID driver, I see many folders with different versions of the driver. Here are the folders or versions given. 180ob 964_180 965 966_968 What drivers do I need to add in order to get XP on my SATA disk?

  Read the article

• Asus P6X58D & 12GB of RAM

  - by Hunter

  I just assembled my new PC and it screams, BUT it's only recognizing 8GB of ram in BIOS and OS rather than the installed 12GB. In the BIOS the RAM was registering at 1066 so I set it to 1600MHz. I update the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS = Windows 7 Ultimate 64-bit Mobo = Asus P6X58D Premium CPU = Intel Core i7 920 RAM = CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD = Intel 80GB SSD SATA II PS = Kingwin 1000W Modular I've installed the Beta BIOS 0808 but no luck!

  Read the article

• Asus EeePC X101CH Touchpad issue

  - by ssvarc

  I have an Asus EeePC X101CH that the touchpad was uninstalled from (I saw the uninstall dialog boxes open). After a restart there was a PS/2 mouse under View Hidden Devices in Device Manager that wasn't installed properly (I'm assuming that this is the touchpad). Going to the Asus website and downloading the drivers (V15.3.27.1), I get the error message "Synaptics device not found!". I tried the other driver Version v9.1.7.7 for the Sentelic TouchPad as well (when run it appears to be the driver for the finger sensing) and got the error message "This driver version is inapplicable for the touch pad. Please check the devices on the system and install the suitable driver.". What's my next step? Thanks!

  Read the article

• Asus Rampage III and Corsair DRAM Settings

  - by Glorithm

  Recently I flashed the BIOS of my Asus Rampage III Extreme. But I lost the settings and now only 16GB out of 24GB of DRAM in the system is recognized. Does anyone has the correct DRAM setting for: 2 kits of cmz12gx3m3a1600c9 (Corsair Vengenance 12GB kit) on Asus Rampage III Extreme? Current I have 9-9-9-24 1N at 1.5v, but only 16GB is showing. I even tried to up the voltage to 1.65v, still no joy. Thank you in advance!

  Read the article

• Audio problems with asus notebook with Bluetooth and usb devices in win 7

  - by QuickSilver

  My notebook is Asus P53E - core i5 Windows 7 installed Audio from PC speakers and headphone is distorted when i turn on bluetooth or some usb device plugged in. I belive this is a software issue. I tried updating my audio drivers but nothing help. Any help will be appreciated. Update: After a few days digging I found that this problem is causing by the asus sound enhancement application SonicFocus. The distortion stops while turning off sonic focus. Can anyone help me with a solution other than turning off SonicFocus

  Read the article

• Computer stopped working (ASUS P5GD1-VM)

  - by Gordonrjones

  My computer stopped working the other day. I came down and it was kind of chirping away. Then, when I restarted it, it only did the same thing. I unplugged everything not needed and it did nothing at all. I thought maybe the power supply wasn't working, but when I took the cover off the green light on the motherboard was on and the power supply is making a little buzzing sound. But nothing happens when I turn the computer on, other than the green light on the motherboard flickers a bit. I checked the memory in other computer and it works fine. I'd love to be able to fix this with as little cost as possible. Can someone here help? P4-640 (3.2E GHz, 800 FSB, L2:2MB, EM64T, HT)

  Read the article

• Asus Z8NA-D6, not powering up/no signal for monitor

  - by s093294

  I have a Asus Z8NA-D6 motherboard. Been running fine so far with one E5504 Xeon processor. I have added another Xeon E5504 CPU to the second slot and it will not power up (or there is no signal to the monitor). The status lights turn on as normal. no error led. Nothing happens other then the leds start and both cpus/fans power up. HDD power up. I tried clearing CMOS. Any sugestions? http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6/#download Update. Removing ram for second cpu makes it boot atleast. itboots with memory pluged in for cpu 1. (2 4gb modules) when addin one more to the second cpu it still boots but bios only see the 2 blocks at cpu 1)

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >