Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 6/97 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Asus V1S screen dimming randomly

  - by Bill

  I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. My guess means the inverter cable is damaged, based on previous experience. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

  Read the article

• SATA-II motherboard and drives but only connected at SATA-I

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which has a SATA-II controller. Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA. Both SSD and HDD are SATA-II and the optical drives are SATA-I. I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA-I (1.5 Gbps), not SATA-II (3.0 Gbps). I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA-II? I'm running Windows 7 Ultimate.

  Read the article

• Cannot boot to HDD or Optical when Motherboard in AHCI mode

  - by Shevek

  I have an Abit AB9 QuadGT motherboard and am trying to swap over to AHCI mode. I have an existing Windows 7 installation which was installed under IDE mode. I have set the msahci registry setting to 0. When I try to boot in AHCI mode I get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I have tried booting with my Win 7 DVD in the optical drive. There is 1 SSD (System), 1 HDD (Data) and 2 optical drives connected via SATA If I switch back to IDE mode everything boots fine, either from the SSD or from a CD or DVD in the optical drive. Why can't I use AHCI mode?

  Read the article

• More RAM in motherboard than CPU can process

  - by Videographer Francisco Ferrer

  As I understand reading in the forum post :" By making more memory available to the system more data can be cached in RAM, so there will be less hard drive activity, and less swapping to memory so your system will perform better." But what happen when motherboard for a desktop that supports( and had install) more RAM than the procesor can handle?(aka:procesor Max Memory Size). Is there any advantage to have a MB that hold a bigger RAM capacity than the CPU? If so, how can this be translate using in a program like Adobe After Effects, RAM preview? thanks

  Read the article

• Motherboard/PSU crippling USB and Sata

  - by celebdor

  I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

  Read the article

• IDE to SATA convertor Motherboard Issue

  - by ravidev

  I bought new motherboard Intel DH67GD which has not IDE interface to attach the DVD writer. It has 2 SATA with 6Gb/s, 3 SATA with 3Gb/s and 1 e-SATA with 3GB/s.(mobo specs link : http://www.intel.in/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dh67gd.html) Can anyone tell me how can i connect my old LG DVD Writer(IDE interface) with Mobo ?? Will IDE to SATA Connector work? If yes then how to connect that DVD writer with IDE-SATA converter? Please provide link. Thanks in advance !!

  Read the article

• Is it my motherboard?

  - by jarodrussell

  Early this week my home server (a Linux machine) threw a kernel panic. Yesterday is happened a couple of times. Then all of a sudden, when I plugged a USB stick in to run a memory test, the monitor stopped coming on. Now whenever I turn it on, the system gets power...I heard the drives spin, I see the processor fan spin, and the hard drive light comes on...but nothing happens. I put a video card in the AGP slot, but still nothing. The light on the power button that usually comes on stopped coming on. I took the memory out to see if it would beep, but nothing beeped. It's like it's getting power, but it's not coming on. Does this sound like a motherboard problem to anyone else? I think it is, but a second opinion would be greatly appreciated. Thanks.

  Read the article

• Motherboard memory question

  - by JERiv

  I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

  Read the article

• What does motherboard RAM slot colors mean?

  - by totymedli

  I always saw that the motherboard RAM slots are colored in pairs, but never know what does it means. I just put the 2 RAM in, and after a few tries it always worked. But after I tried to install a third one it always throws me a blue screen of death. Is there an order how should I install RAM to the borad? What does the colors mean? Does they indicate performance boost opportunity or are they just a guide for installation?

  Read the article

• Resolution of monitor is not supported by motherboard

  - by Sandesh

  I have Desktop with configuration Pentium 4,945 intel chipset board,dual booting with win 7 and ubuntu 10.10 (no graphics card) Recently i purchased Dell IN2020M 20" with native resolution of 1600x900 but my display allow maximum of 1024x768 because of this when i play any video in full screen mode it doesn't play smoothly or frames are refreshed jerkily I have tried updating my VGA driver but its doesn't helping me much. Is there any way to solve this problem ? 1if i want to replace monitor what maximum resolution should i buy ? 2if i want to upgrade(graphics card/motherboard) my desktop what is the minimum configuration to support the current system. Thanks in advance

  Read the article

• Asus P6X58-E WS motherboard memory limits

  - by Arsen Zahray

  I've just ordered motherboard Asus P6X58-E WS, and now I'm, looking for memory for it. It has 6 slots, but the strange thing is, that in specifications it says that it is limited to 24G of memory . I'm planning on using 8G Kingston KVR1333D3D4R9S/8G sticks with it. Using those sticks, I'll be teoretically limited to 48G. Does the 24G limitation mean, that even if I install all 6 sticks, I still will be limited by 24G of possible memory? Sorry if the question seems dumb, but I never faced such a limitation before

  Read the article

• strange problem with my motherboard

  - by user19950

  i have strange problem with my computer. i tried to turn it on, the computer was started ok, but i didnt see anything on screen. i tried to understand what cause the problem. its was'nt the HD or the screen. when i opened the computer, i saw that the fan connected to my motherboard didnt work. the funny thing is that i drove to a friend of mine, so he would fix me the computer, and when we tried to open the computer there it worked somehow and the fan worked also. when i came back home the computer again didnt work and the fan didnt work as well. does someone know what can cause the problem?

  Read the article

• Fastest Memory (within reason) for a MotherBoard [on hold]

  - by sampson

  I was wondering if it would be OK to use DDR3 3000 memory with Asus Maximus VI Impact MotherBoard, Intel® Core™ i3-4130T Processor and Steamcom's FC8 case The purpose of this machine is for a HTPC (Home Theater Personal Computer) system, only, no gaming. The case is fan less as is the CPU cooling system. Also, would it be worth it, heat wise, to go past the 1600 memory type? I mean, would DDR 3000 make the box that much faster to make it worthwhile? The Processor has a TDP rating of 35 W. The memory specifications for the processor are: Memory Specifications Max Memory Size (dependent on memory type) 32 GB Memory Types DDR3-1333/1600 # of Memory Channels 2 Max Memory Bandwidth 25.6 GB/s ECC Memory Supported ‡ Yes The FC8 case's heat displacement system is rated at 95 W TDP

  Read the article

• Installing Linux on an Asus p8z68-m PRO Motherboard

  - by Holland

  Here is a challenge: how is this done? I've tried disabling the ASM1061 controller in the Onboard Devices section, using Wubi, booting from USB (as I don't have a DVD drive, yet), and even booting from RAID/IDE (with AHCI as the default) to do this. Still, no dice. Google shows up virtually nothing related about Linux and this mobo, apart from a people just saying "disable ASMedia" (which, I assume is the ASM1061 controller, as that's all I see - apart from the USB 3.0, which I disabled already) and it hasn't really helped much. Thus, what is wrong here? Edit My problem is that I cannot boot Linux via USB or a simple Windows installer such as Wubi (for Ubuntu). I wind up getting error messages along the lines of write cache failed, along with many other cryptic error messages similar to the following: [ 1400.351374] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1400.353433] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1400.356601] sd 4:0:0:0: [sdb] Assuming drive cache: write through This seems to be common for Asus P8Z68-M Pro motherboards, with the only notable solution being to "disable ASMedia", which, as I said before, I'm guessing is the ASM1061 controller on the motherboard. Despite already disabling this, I have tried this with both Fedora and Ubuntu without any success. I need to know what I can do about this; has anyone ran into something similar or heard about this issue before? I know these motherboards are relatively new...

  Read the article

• Compaq Motherboard gives "CPU Fan Error"

  - by John

  I have a motherboard for a HP business desktop dx5150 PC. The model written on the board is "MS-7050" and it is for an AMD socket 939 processor. I got everything installed in it, and when I turned it on, it showed a message stating that there was a "CPU Fan Error" (or some similar language) and then turned off. It never stays on for more than about 30 seconds, probably less. The fan had previously been working great, but I replaced it anyway with a brand new Cooler Master fan. This did not work. I then reset the BIOS with the jumpers on the board, no dice. I replaced the CMOS battery. Same error. I then replaced the entire computer power supply with a brand new Antec, same error. The fan header is keyed, and has room for 3 pins. The CPU fan is designed the same way, so its not that I'm missing a temperature sensor or anything. Can anyone give some suggestions? Especially maybe some secret keystrokes to bypass this error?

  Read the article

• Replacing the LCD panel in a netbook (Asus Eee PC 1005)

  - by neilfein

  Yesterday, I was cleaning up and dropped my Asus Eee 1005PE. The screen is cracked inside (i.e., cracks are visible only when on), and no longer works properly. I booted up with another monitor attached, and the computer itself is fine, but needs a new screen. Best Buy wants at least $250 to repair it (that includes their $150 fee to breathe in the same room as the unit), and Asus was of no help at all. (They're incredibly cagey and won't provide any money numbers at all, not even the cost of the part.) If replacing the LCD is no more trouble than replacing memory or a hard drive, I can do that. It's within my means to buy the part (18G241010402, a TFT LCD), but I'd like to know more about the procedure involved. My question: How does one replace the screen in this unit? Do I simply open the case and swap out the unit, or do I need to disassemble anything else to get to the screen? I don't want to order the part and then end up in a situation like this. Is the case screwed shut, or is it like an iPod where they glue things closed? I know enough about my abilities with a soldering gun to not attempt to solder tiny wires, would any of that be involved?

  Read the article

• Which type of Form factor (motherboard) i should buy and why?

  - by metal gear solid

  If budged is not a problem. I just need best performance with less power consumption. I can purchase any cabinet , power supply and Motherboard. Is Power supply has any relation with Form factor, should i purchase PSU according to Form factor of motherboard? Is the size of motherboard and number of Slots only difference between all form factors? Is there any differences among form factors, related to performance of motherboard? Is bigger in Size (ATX) motherboard always better? Is it so smaller in Size motherboard will consume less power? What are pros and cons of each Form factor? What there are so many Form factor were created?

  Read the article

• creating a 802.11n wireless network between laptops and asus n-13 wireless adapter

  - by xpugur

  I have a asus usb n-13 wireless adapter and 3 laptops in a home we try to create a network witn 802.11n standards but failed each time laptops have intel 5100 agn. We try to create network with wpa-2 personal encryption that also fails(couldn't connect) but with wep encryption connects but with 802.11g standard... so do you know how to create a 802.11N based network? ... thank you...

  Read the article

• ASUS M2N-SLI Deluxe - 1 long and 2 short beeps

  - by Agares

  Hi! I bought Asus M2N-SLI Deluxe. When I put my stuff(all is 100% working): Athlon 4450e 2GB RAM GoodRAM 667MHz(It's polish brand, maybe not popular in other countries) Sapphire Radeon HD2600(I tried replacing it with S3 Trio PCI) with it I heard just 1 long and 2 short beeps. It changes only, when I run MB without processor - then computer run for few seconds and powers off. What's the problem?

  Read the article

• Asus R300 car navigation - RDS TMC

  - by ondronr

  I have Asus R300 car navigation device. It has optional RDS TMS receiver. What does it mean? can I add external RDS TMC module? TMC button in branded iGo software is disabled. thanks

  Read the article

• ASUS P8B75-M Support Drivers incompatible with Win Server 2003

  - by Killrawr

  Hey I've just installed Windows Server 2003 Enterprise onto a newly built PC with this motherboard, but when I try to install the CDROM Support files it reports with an alert that says "Support files incompatible with WIN... blah blah" (Basically they seem to be only compatible with win7). Should I be installing Windows Server 2012 for these drivers? or are there drivers that are compatible with the Server 2003 Operating System?

  Read the article

• Mother Board Question

  - by user33931

  1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

  Read the article

• How do I know when my on-board ethernet is dead? (Realtek 8112L LAN controller w/ AI NET2 )

  - by Usagi

  So I have an ASUS P7P55D-E Pro motherboard. It has an on-board Realtek 8112L LAN controller w/ AI NET2. I suspect that my LAN controller is dead but I don't really know for sure. This is what I know thus far: Everything was working, I have a triple booted system and ethernet was functional under Linux, Win7, and OSX. My ethernet is no longer functional under all three of the operating systems. I was experiencing random momentary internet outages before everything finally went dark. I don't know much about the AI NET BIOS tool but I believe it just checks for ethernet problems before you boot into an operating system. In any case, it doesn't find a connection upon boot. I've checked the connection on a couple of other machines and everything worked fine. I think I already know the answer to my question, but are there any other possible explanations, or is it dead?

  Read the article

• How to connect 3 monitors into an Asus 9800GT

  - by aliasbody

  I don't know if this is possible but, I've heard that there exist some DVI connections that allow and recognize the connection os 2 Monitores in the same port (I can be wrong tho). I have an Asus 9800GT 512MB on my computer that runs Ubuntu 12.04 and Arch Linux, and I am trying to connect 3 monitors. I already have 2 (17" each), and want to connect a new one with 19", but on my 9800GT I only have 2 DVI connections. Is there anyway to have 3 monitores extended without having to buy a new GPU ? Thanks in Advance,

  Read the article

• asus eee pc 1018p os installation

  - by cornerback84

  My friend has an asus eee pc 1018p. It has no cd/dvd drive (neither do he have a usb cd/dvd drive). The OS wasn't working fine, so we decided to restore the system using the provided OS backup from HD. But midway to installation it was interrupted and the computer was restarted (not h/w or s/w issue but we did it). Now we cannot run the backup and we also tried to install windows 7 through USB, but as soon as we start to install the OS, it says that some device driver is missing. It turns out that the OS needs usb device driver to continue. It has USB 3.0 maybe thats why the OS needs the driver. I tried disabling 3.0 and enabling 2.0 but then it does not boot from USB drive for some reason. We are stuck with this. The backup doesn't runs and when booting from USB it says that it needs device driver. Anyone has any idea what we should do?

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >