Search Results

Search found 445 results on 18 pages for 'dvi'.

Page 5/18 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Connecting a DVI splitter

    - by Steve Carter
    Hi I am trying to use a DVI splitter so I can use either my pc monitor or my TV which is close to the pc, Both monitors work fine if the splitter is connected after the pc has booted up, But if the pc is re booted both the monitors show a blank screen after saying there is no signal. I have been told it could be because the monitors are working on different resolutions is this the case, If so how can I cure the problem without having to keep changing the res on TV monitor

    Read the article

  • Hardware for 4 Monitors

    - by Simon
    Looking to build several systems to output to 4 monitors over DVI. I notice most of the recent Nvidia and ATI/AMD cards have dual-DVI ports. Can I simply install two of these cards to get four monitors - or are only some cards capable of running side-by-side with another? How can I tell before purchasing? Simon.

    Read the article

  • Need to Connect 2 HDMI between Onboard and Add-In GPUs - What's the consequences?

    - by jmalais
    If i plug a second hdmi cable into my onboard video output (my dedicated add-in only has one hdmi port) will it use my video card or the onboard for that display? Also, what is the difference in quality between HDMI and DVI? I do have a DVI to HDMI adapter and cable that I could use alternatively if the above is not in my best interest. This is a gaming related question as I will be gaming off the two displays, hopefully in the highest of quality.

    Read the article

  • Can you plug DVD/Game system into an LCD?

    - by Xeoncross
    All the LCD's in our house have DVI and VGA inputs. None support S-Video or any analog formats. Our game systems (nes, snes, n64, ps, ps2, gamecube, etc..) and DVD and VHS players only have composite (the yellow/red/white cords..?) or S-Video (that PS2-input like cable..?). How can I convert the signal these analog systems output to work on VGA or DVI?

    Read the article

  • Laptop display not working unless DVI cable is plugged in

    - by marien
    I have a Lenovo ThinkPad T420 with an i5 processor and integrated graphics. I dropped the laptop and now the screen is not working. I replaced the screen and it is still not working. It shows the BIOS and then at Windows login the screen gets all static looking. But if I plug in a DVI-to-HDMI cable the laptop starts and works fine. Even the external display works and the laptop display works too. As soon as I unplug the cable the screen crashes and is all static. I cannot figure out the problem. The video works because the external screen still works. How can I fix this?

    Read the article

  • Triple head DVI KVM

    - by cat pants
    I am trying to run a Linux desktop and Windows desktop simultaneously with a KVM for maximum productivity. Also running three monitors. I need a KVM that can do 3x DVI @ 1920x1080 + 2x usb (mouse and keyboard) + toslink for two machines. What would you suggest? I ask on here because I have searched quite a bit and have yet to find a KVM with these requirements. (I would be open to something like modifying 3x regular KVMs to control them with one button or similar) Thanks! (I tried posting this question earlier, but it was closed as being "not related to computer hardware or software" ... is a KVM not related to computer hardware or software? I'm pretty sure it is. kvm-switch has been tagged 100 times on here for example.)

    Read the article

  • Removing DVI connectors stuck in video card ports

    - by thecyclegeek
    I need some help removing a couple of DVI connectors which are stuck in my video card ports. I don't know why they were screwed in so tightly in the first place but they won't move. I need to replace hardware in the machine, but doing so with the cables connected and the box in its current position is nearly impossible. I've tried pliers with grips to loosen the screws holding the cable, and I've tried a screwdriver, the latter ended up breaking off the plastic. Neither worked. I'm at a loss as to what to do and I'm very frustrated. Can I get some suggestions?

    Read the article

  • Sudden "No Signal" in HDMI-DVI connection

    - by nazikus
    Yesterday I have connected external display Asus VW192C to my laptop Dell XPS 14-L421X via HDMI-to-DVI-D cable. And it worked perfectly fine from start. The day after, Asus screen went blank showing "No signal". Every time I connection/disconnection cable or power off/on the display it says "No signal". And I didn't change any system configurations meanwhile. To troubleshoot the problem, I have tried to connect laptop to TV (hdmi-to-hdmi) - it was fine. I've tried to connect a different laptop to the display via the same cable - worked fine as well. So its obviously something on system level, either Windows or graphics drivers. Also it seems that Windows still see the external display (I can move mouse pointer away from the main screen in Extended mode), but there's just no signal. Any ideas? What else to try? PS. My laptop has 2 graphics cards - GeForce 630M and Intel HD 4000 using NVidia Optimus technology. I have updated to latest Intel and NVidia drivers, still didn't help. PPS. Although I shouldn't have updated (from Intel support): "our Intel generic graphics drivers from the Intel website do not support using both Intel Graphics 4000 and NVidia GeForece GT630M". Nevertheless, it should not affect connectivity to additional display.

    Read the article

  • Why does 1080p through a VGA cable fit my HDTV but is oversized when through an HDMI cable?

    - by GraemeF
    I have put together a new PC with a XFX GeForce GTX 260 graphics card and have it connected to my HDTV. First, I used an old VGA cable with a DVI to VGA adapter and plugged it in to my HDTV's VGA port. Running at 1920x1080 it fit the screen perfectly. Now, to avoid running another cable across the room, I have connected it with a DVI to HDMI cable to my TV's HDMI port, and the desktop at 1920x1080 is cropped by the edge of the screen. I have "fixed" the cropping by using NVIDIA's "Adjust desktop size and position" tool, which created a screen resolution of 1814x1022 to fit the screen, but this is no longer the TV's native resolution and confuses some software (e.g. WoW). Why does VGA work as expected, but HDMI is scaled up? Can it be avoided?

    Read the article

  • Samsung syncmaster SA300

    - by lee
    I recently bought the above moniter. i am now using the DVI port in the moniter but the picture quality stil seems average like the same when i was using the VGA port. THere hasnt been a noticeable change. I am using the DVI output from my graphics card but i thought the picture quality should be alot more High Def than what it is. im just really disappointed in the out come as was expecting nearly High Def quality from my new moniter but just seems a bit normal. Could i need to change any settings?

    Read the article

  • Windows 8.1 triple monitors - can't enable all 3 at the same time

    - by Jeckerson
    Today decided to update from Win8 Pro to Win8.1. Everything was fine with enabled 3 monitors (Extended mode, not Eyefinity) at the same time. But after update can't enable 3d monitor, only 2 could be enabled at the same time. Did current things before write question here: Remove all drivers, reboots, re-installs Different cable input's and orders of enabling Tried to enable each monitor from Catalyst and Windows Screen Resolution Spec's: Windows 8.1 Pro XFX HD7970 3 of LG E2442 Cables: 2 DVI 1 HDMI Googled for many time and found one of possible solution is to buy ACTIVE mini DisplayPort to DVI/HDMI, but maybe there are some another more simple solutions?

    Read the article

  • PnP Monitor not detected after reboot

    - by Josef
    My second monitor only works when I first disconnect and then reconnect the DVI cable while Windows is running. If I reboot or sleep and wake up, it stays dark. The other Monitor works fine. I have Windows 7 64 Bit with an ATI HD 4770. Any ideas?

    Read the article

  • Can a Mini DisplayPort to HDMI cable support resolutions above 1920x1200?

    - by cnst
    Is it theoretically possible for a cheapo Mini DisplayPort to HDMI cable or adapter to support resolutions above 1920 × 1200, e.g. 2560 × 1440 (QHD)? Or is it always electrically-equivalent to a single-link DVI, and such resolutions above 1920×1200 are out of the question? From empirical evidence, I've tried out some rather expensive brand-name adapter from a local Apple dealer that was marked as HDMI 1.3 compliant with my mid-2013 MacBook Air (5000) and also with X230 (4000), and a QHD monitor, but was only getting a maximum of FHD resulution through such an arrangement.

    Read the article

  • Dual External Monitors Through Docking Station on ASUS G73JW-XT1

    - by user60695
    I am getting an ASUS G73JW-XT1; and I would like to set it up so that I can plug it into a docking station at my desk, and use 2 external monitors (not the laptop display and an additional monitor). The computer supports a DVI and HDMI output, but I cannot find any docking stations that will support two external displays, as well as audio ports and USB ports for other peripherals. Does anybody know of a specific docking station that will do this, or another workaround without having to plug in several things to my laptop every time I bring it to my desk?

    Read the article

  • Monitor does not work past certain resolution.

    - by Steve Stifler
    I have a Macbook 5.1 with Snow Leopard, and a Samsung SyncMaster 2253BW that I use for an external monitor. I connect it to my laptop via a DVI-to-MiniDisplayPort adapter. Whenever I try to set the resolution of the monitor to 1680x1050, its maximum resolution (at least the only one that fills the entire screen), the screen flickers once or twice before claiming there is no source attached. I've had this issue since the first time I tried to connect the two, however for some reason for a brief period in time the monitor would successfully display at full resolution. All lower resolutions work fine too, it's just at 1680x1050 that the problems occur. Any ideas as to why this is happening? Thanks.

    Read the article

  • MacMini giving "no signal" when using the television resolutions (480p, 720p, 1080i)

    - by chum of chance
    I have a Mac Mini (10.6) with a DVI out to my 720p television. It shows the options for 480p, 720p and 1080i with a little television next to the icons, along with the stand resolutions like 1024x768. The standard resolutions work fine with overscan checked, but I can't get any of the native television resolutions to work. I only get a "no signal" on my television. The input on the television is marked with 1080i/720p/480p and yet only 480p (and the PC native resolutions like 1024x768) work. What's happening?

    Read the article

  • HDMI resolution limited to 1920 x 1080?

    - by Jay Bazuzi
    Monitor is a Dell 3008wfp. Very nice. Max resolution 2560 x 1600. Video card is an ATI Radeon HD 4350. I like it because it was cheap and is fanless. (Noise bugs me.) I would like to switch from DVI to HDMI, but when I use HDMI, the resolution drops to 1920 x 1080. Do I need to change out my video card to get the full resolution? How can I pick one that will do the max resolution?

    Read the article

  • Acer LCD says "no signal"

    - by Ken
    I have an Acer 24" LCD (model "AL2423WDR") that's about 3 years old. It worked perfectly for most of its lifetime so far. Recently it started giving problems. When I turn it on, it either says "no signal" on the display, or the power light goes yellow (as if in power-saving mode). This happens with both DVI and VGA (both of which worked fine before), and stranger still, the 4 buttons on the front, for accessing the on-screen menus, don't do anything. I've also tried different computer hardware and software (PC/Mac, Linux/MacOS), but nothing has worked. I've tried power-cycling it (with both the power button and the power switch), and also unplugging it entirely. The nonworking buttons suggest to me an issue with the firmware. I found a place on Acer's website that says I can send it in to have it fixed, at my expense, but I'll avoid that if I can. Is there a way to fully reset it manually? Or is there something else I can try?

    Read the article

  • Green flickering pixels that move with black images

    - by user568458
    Strange question... Occasionally, on my LCD screen, pixels that should be black flicker rapidly and constantly between black and green, about 4 flickers a second. The crazy part is, unlike dead/stuck pixels, they are relative to content on the screen and move with it. For example, I might be looking at a web page with a picture that has lots of black. There might be a couple of green flashing pixels in that black that shouldn't be there. I scroll the page, and the green flickering pixels move with the image. It seems that everyphysical pixel is fine, but somehow something interprets part of the image in a way that causes flickering green... It's not just in a web browser. My first thought was to blame a trolling blogger cunningly uploading an animated gif that simulates a failing pixel... but it happens in a wide range of applications. It seems to occur randomly, other than that it seems to only occur in areas of pure black, and it's always pure 100% green. It happens rarely enough that it's not a big deal, but it's such a strange problem it bugs me. I can't find any info on anything like this. I'm not even sure if it's hardware or software. Any ideas? (windows 7 laptop connected to LCD by DVI to HDMI cable)

    Read the article

  • Games, Windows 8.1 and 144Hz display

    - by Marioysikax
    So I have been having problems with few games after switching from 7 to 8.1, which seems to be related to my 144Hz monitor. Few examples: Shank, Shank 2, Blood of the Werewolf, Astebreed, the Sims 2 and Rayman Legends patch 1.2Had few other as well but it's been long and I have 600+ steam library. From those games at least the Sims 2 and Shank worked without any problems with same setup and Windows 7. So basically these games simply refuse to launch with basic setup. However if I plug 60Hz TV with HDMI instead everything magically starts to work. As for Astebreed and the Sims 2 using windowed mode seems to also work. As for Rayman Demo and version 1.0 works for some reason and 1.2 breaks settings menu. I have already tried contacting supports. EA support stated game simply shouldn't work with 8.1 at all (which is lie as it works with that TV and friend with 8 plays just fine), ubisoft support took few weeks and support said he will forward info for further processing, blood of the werewolf support had no idea what's going on and told me to just use my TV instead.Changing monitors refresh rate to 120Hz or forcing it to 60Hz doesn't do anything. I have DVI right now but I will try with DisplayPort when I get the cable. At PCGW Garrett said it may have something to do how listing resolutions work with 8 compared to earlier Windows versions but my googling skills don't bring anything up and compatibility mode for earlier windows version doesn't work either (not that I expected that to work). My system specs are on my steam profile. How do I get those work with my 144Hz monitor as well as possible future games having same problem? Downgrading to 7 would work but is far from practical and I don't own legit lisence for that one.

    Read the article

  • Looking for a real DisplayPort hub/splitter

    - by squircle
    In my search for a new display, I came across the Dell Multi-Monitor Hub MMH11, which seemed to be an alternative to my search for daisy-chainable DisplayPort displays. However, before I cave and spend $179 on this device, I am wondering if this will be similar to other splitting devices where it appears to the computer as one big monitor and the device does the splitting (which I don't want). Or, does this use the packet-based nature of DisplayPort to present two/three separate displays to the computer? Also, would this device work on my MacBook Pro? (I know the Dell site says it's for Windows, but it also says that no driver installation is required. I'd assume since the MBP supports DP 1.2 it would work, but it's better to ask). Thanks! Edit: I've checked out the similar-looking Cirago DisplayPort splitter, but I have extreme doubts as to whether or not it's a genuine displayport splitter, or just another monitor-conglomerate. Their DVI solution looks identical to Dell's, which I'm pretty sure won't do what I want. I also don't want to order this DisplayPort "hub" and find that it doesn't do what I want it to.

    Read the article

  • Dock with dual external DVI monitors with Intel + Nvidia Optimus?

    - by Ryan
    I have a Dell Latitude E6420 laptop plugged into a docking station, and the dock has 2 monitors (connected with DVI). Also note that I've installed Ubuntu alongside (dual-boot) Windows 7. I can't get the dual monitors to work both on Ubuntu (either 11.10 or 12.04) and Windows 7. When I run lspci | grep VGA, I get: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF108 [Quadro NVS 4200M] (rev a1) If I then reboot and uncheck Optimus setting in the BIOS during reboot, I'm able to get the dual monitors to work in Ubuntu 12.04 (but I need to configure them every boot in Nvidia Settings). When I run lspci | grep VGA, I get: 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) But then if I reboot into Windows (leaving the Optimus unchecked), Windows can't detect external monitors, and the resolution is unacceptably low. I've seen on many forum posts that this particular graphics card setup causes lots of headaches. I haven't been able to resolve my problem yet. How can I use my external display on my laptop with intel and nvidia video cards? How to use external displays with Intel driver on a NVidia/Intel hybrid system nVidia Optimus , Unity 3D and Dual Monitors "Just use VGA instead of DVI" isn't an option because my dock has only 1 VGA port (and 2 DVI). Switching the BIOS setting on every reboot and then reconfiguring the display settings every time is tedious, time-consuming, and impractical. Do you know how to make this work smoothly? Thanks for your help! P.S. see also: http://superuser.com/questions/434358/dell-latitude-e6420-dual-boot-ubuntu-windows-7-optimus-graphics-problems

    Read the article

  • LaTeX -> dvi/pdf/ps -> list of (x, y, font_name, character_id)

    - by anon
    Input: I have a LaTeX file, with plain text & math formulas. Desired output: I want a list of elements, where each element is: x-coordinate y-coordinate font_name character_id Basically, I want to take a LaTeX file, r"render it", but instead of printing it / getting an image, I want it to say "okay, you have a Sigma symbol here, then you have a 'x' symbol there, ...) What's the easiest way to achieve this? (I'm on Linux) Thanks!

    Read the article

  • Dell Multi-Monitor Hub: true DisplayPort splitting?

    - by thepurplepixel
    In my search for a new display, I came across the Dell Multi-Monitor Hub MMH11, which seemed to be an alternative to my search for daisy-chainable DisplayPort displays. However, before I cave and spend $179 on this device, I am wondering if this will be similar to other splitting devices where it appears to the computer as one big monitor and the device does the splitting (which I don't want). Or, does this use the packet-based nature of DisplayPort to present two/three separate displays to the computer? Also, would this device work on my MacBook Pro? (I know the Dell site says it's for Windows, but it also says that no driver installation is required. I'd assume since the MBP supports DP 1.2 it would work, but it's better to ask). Thanks!

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >