Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 502/757 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

• How to set up VLAN network

  - by Paddington

  I'm changing my network from having every device on flat network to using VLans. My problem is that we already have a lot of devices on this network(192.168.20.0/24). From theory, I read that each Vlan has to be a different subnet and then I need to configure virtual interfaces on my Cisco router to cater for inter vlan routing. 1) How can I segment this network with minimum down time on the devices already on the network? 2) Can I just create Vlans and leave all these Vlans in the same layer 3 network so that they can go out of the network (I am not too concerned about inter-Vlan routing) or I have to create subnets which means reconfiguring the existing devices (something I do not want).

  Read the article

• Windows always open top left

  - by BobTodd

  I find this a highly annoying "feature" on a wide screen monitor that my mostly used apps - terminal and gedit always open directly under the top-left corner of my screen and I have to drag them to my eye position each and every-time. I have tried installing the CompizConfig Settings Manager and using the feature to position windows centre, but this has had no effect - the force feature here isn't working for me either. I can use e.g. gnome-terminal --geometry=140x50+50+50 for the terminal but this doesn't work for gedit. Any ideas? Thanks

  Read the article

• Disabling mouse acceleration in X.Org (Linux)

  - by aib

  This is the Linux version of my Disabling mouse acceleration in Mac OS X question. Hopefully I'll get an answer this time. I am tired of mouse acceleration and want to have a completely linear mouse response. This is easily achievable through any of the 5 or so methods (some subtly implied) on the X.Org wiki page on pointer acceleration. However, they also disable velocity scaling. I don't want a 1:1 mapping between device and screen coordinates. I want a 1:N mapping where N is a constant. Any ideas?

  Read the article

• Unable to connect to sharedfax error

  - by Owl

  I'm running SBS2k on a machine with a 56k modem for all outgoing faxes. We have a terminal server running server 2003 enterprise and in printers the sharedfax shows "unable to connect status". When you right-click, properties, it gives you an error saying the spool service is not running and you cannot view properties. The spooler service is indeed running on the 2k3 server because I can view the other printer's properties..and on 2k I show the Microsoft Shared Fax service AND Print Spooler as started. Here's the tricky part, I can add the shared fax printer on a domain computer locally (Windows XP) and it will show ready status and I can send faxes, they show up on the 2k server's fax console manager as in progress. I've sent a couple from a few different workstations today successfully, but still unable to send from 2k3 terminal services.

  Read the article

• Dowload size of Streaming Videos

  - by Excalibur2000

  I would like to know that if a website advertises a streaming download as say 100MB, would my download to my computer be 100MB ? Would there be streaming control packets that a service provider would charge for over and above the 100MB content ? Assume the latest RealPlayer viewer. The rub for me is that I have downloaded MIT lectures and according to my file manager the file sizes have matched up to the download sizes on YouTube. However my ISP seems to think that the streams were larger and charged me for more than the file size of the download. I am left wondering where the data came from.

  Read the article

• Wyse Simple Imager. Unable to Create Product Directory

  - by Steve

  I am trying to submit a post on www.technicalhelp.de, but I receive an error: Invalid Session. Please resubmit the form. This happens if I delete temporary internet files and log out and back in, and if I use a different browser, and if I use a proxy browser. Perhaps someone on this forum can help I am trying to push a Wyse device image to a USB thumb drive. The image is on a remote server, and the thumb drive is connected to my desktop PC. I am using Wyse Simple Imager to do this. When I select the following: Product: V90 Image Version: 5.010627.512 Image File: \servername\folder\OLD_Rapport\V90-withusb\9V90.i2d Almost instantly, without attempting any action, I receive the message: WyseImager Unable to Create Product Directory. Add Image Failed I have completely formatted the USB drive with FAT32. It is new out of the fox, and I can create folders in it. How do I fix this?

  Read the article

• Can't see CMD.EXE on Windows 7

  - by Andrea

  I have a problem with Windows 7 and cmd.exe with these conditions: Logon as non admin user Launch cmd.exe I can see cmd.exe in task manager but it's invisible in the desktop and I don't know what to do, everything is fine and I can see cmd.exe if I do login with an admin account. I can see it in the "Process" tab but not in the "Application" tab, and if I launch five cmd.exe's, I see five processes, but from that tab I have no "Bring to front" or "Maximise" I can't find any WOW folder under C:\Windows, even with show hidden and system files enabled. I'm running Windows 7 32-bit running on a 64-bit Intel Core 2 Duo E7500

  Read the article

• systemctl (Fedora 17) and interacting spawned processes's consoles

  - by Sean

  Introduction I've recently upgraded to Fedora 17 and I'm getting used to the newer systemctl daemon manager versus shell init scripts. A feature I need on some of my daemons is the ability to interact with their consoles because unclean shutdowns not initiated by the process itself can cause database corruption. So, performing a systemctl stop service-name.service for example might cause irreversible data loss. These consoles read user input through stdin or similar methods, so what I've been doing on my old OS is to place those daemons foregrounded in a screen session, and I suspended that screen session with ^A ^z. It's also worth noting that I've now made systemctl do this automatically if the computer reboots, but it still doesn't solve my potential data corruption problem I'm trying to avoid. My Question Is there a way to use systemctl in order to directly interact with the console of processes it spawns? Can I hook a process through systemctl to get access to its console? Thanks You guys always give great answers, so I'm turning to you!

  Read the article

• mysqld stopped working..can't restart...need help?

  - by grant tailor

  i was just checking somethings and noticed mysqld is not running in parallels power panel control panel...but my websites on the server were all working fine, which use mysql databases...so really strange So i tried to restart mysqld but got errors and can't restart and now all my websites are all offline now saying error connecting to database. logged in as root and tried /etc/init.d/mysqld start and got this error ERROR! Manager of pid-file quit without updating file What do i do next? What do i do? Please help!

  Read the article

• Windows 7 Desktop as Bluetooth Mixer

  - by J.R. Lillard

  I would like to stream all the audio from my Droid X2 to my desktop running Windows 7 via bluetooth. When I pair the two devices I can make this work but the audio plays through the internal speakers. I am actually wanting to listen to everything through a pair of bluetooth headphones. The end result would be that I could listen to music from my phone but easily pause it to listen to audio from the desktop instead. So far I have not had any luck. I thought about connecting the line out to the line in so I could monitor the line in from my headphones. My current setup is wiring the phone to the line in and then monitoring the line in through the headphones. I'm just wanting to eliminate the wire and go wireless the whole way. Is there something in Windows that prevents it from taking an inbound audio stream and sending it out another device?

  Read the article

• Desktop stops working in Windows 7

  - by Roger

  I'm having an odd problem on one of my Windows 7 machines. At machine startup, explorer.exe is working properly - I can use the Start menu, click on desktop icons, etc. At some later point, though, I lose the ability to interact with desktop icons. I can't double-click to open files on the desktop, and I can't right-click to see the properties window. Oddly enough the Start menu still works properly, and I can still open an Explorer window into my desktop and access everything. I can get around the problem by killing explorer.exe and restarting it using Task Manager, but it's annoying to have to do this over and over. Does anyone have any ideas? I took a look at startup files with msconfig and didn't see any obvious problems. Any suggestions would be appreciated.

  Read the article

• ubuntu 10.04 notebook edition running slow

  - by Nrew

  I installed ubuntu 10.04 notebook edition inside windows 7 through wubi installation. I've installed it in a Compaq Presario b1200 laptop. But the graphics is very slow. When I choose the items in the left hand pane. It takes up to 15 seconds for the screen to react. What am I supposed to do? I tried to go to the device manager and see if there is a graphic driver that isn't installed but it said that there are no proprietary drivers available. What might be the cause of this problem, how to solve this.

  Read the article

• Can a processor upgrade cause BSOD?

  - by Daniel

  I Had the following hardware setup: Phenom II X4 945 Asus M4A97 4GB DDR2 OCZ Radeon HD5850 OCZ Agility 2 120 GB Windows 7 x64 Pro Fully updated (latest drivers and windows update patches) Then I bought an used Phenom II X6 1090T and installed it without formatting. Since that my computer started BSODing almost every time I'm playing any game and with different error messages, like: page fault in non-paged area bad pool header the video memory manager found a problem error in dxgmm1.sys(or something like that) And when it doesn't BSOD the game simply crashes. I have tried: Updating BIOS Reseting BIOS to defaults Reinstalling Video Drivers Installing the latest DirectX All that's left is to do a full format and I don't want to do that since it's going to be a lot of work to fine tune windows to my preferences again. So is my "new" processor defective or do I really need to format the computer? Update: I use a (properly installed) custom cooler from Coolermaster and both the BIOS and the Open Hardware Monitor(Application) attest the CPU is not overheating, so I guess the CPU its defective and since I bought it from a guy over the Internet I'm probably screwed

  Read the article

• Overheating on Ubuntu 12.04

  - by mati

  I have a Dell Inspiron Q17R with two graphic cards and I noticed that it is overheating. I installed Bumblebee, Jupiter and Flashblock, and I followed this guide as well, but it still got up to 74C. Is there anything more I can do? It still doesn't really seem to be working well and the fan keeps spinning really fast. After performing the following test: sensors in the terminal, this is what I got: Adapter: Virtual device temp1: +75.0°C (crit = +100.0°C) temp2: +75.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +65.0°C (high = +86.0°C, crit = +100.0°C) it doesn't look good.

  Read the article

• Dual Monitors don't turn off/sleep when they should

  - by Mario

  Details: Dual 25" monitors connected to HP Envy via HDMI and display port via DVI adapter. Power scheme is set up in high performance (Dim Display: Never - Turn Off Display: 15 mins - Computer Sleep: Never) Screensaver is set up to kick in after 10 mins of idle (which happens) 5 minutes later, the screensaver stops. The "Monitor Going to Sleep" notice appears on screen and monitors go to sleep briefly. All is well thus far. Suddenly, the Windows 7 alert sound when a device is unplugged is heard. Monitors then turn back on. Screens are black. Only the mouse cursor is displayed. Backlighting is back on. This only started happening after I obtained and connected the second 25" monitor a few days ago. However, I had a 24" in its place before, and this wasn't happening. Why is this happening and how do I correct this behavior? Thanks in advance.

  Read the article

• How to install Windows on a laptop with no CDROM drive?

  - by Jason Kester

  I have an old Thinkpad X60 that I'd like to wipe clean and rebuild. Seeing as this machine doesn't have an optical drive, what's the easiest way of installing Windows XP? I have an external USB hard drive available. Would it be possible to run the install from that instead? Otherwise, what options do I have? Edit: assuming we're using a USB mass storage device... Is there a BIOS setting that I would need to change, or will it configure itself automatically? Would the USB drive need to be configured in any special manner, or would simply having a copy of the Windows CD files in a directory there be sufficient? Since the first couple answers that came in were basically "yes", I guess I didn't phrase my question correctly. I'm asking for detailed instructions on how to do this, not just a sanity check that I'm headed in the right direction. Thanks!

  Read the article

• Windows 2008 R2 on ESXi 4.1 cpu utilization kernel high

  - by MK.

  I have a Win2k8 guest running on ESXi 4.1. The host has 12 cores and the problem happens even if the guest is the only VM on the host. We have 4 cores dedicated to the guest. We noticed that network starts chocking when the CPU load goes up. After some testing we noticed that when running a simple CPU hogging tool set up to run 3 threads at 100% the regular CPU load goes to 75% like it should and the "kernel times" graph in task manager goes up to 25%. My intuition tells me that the network problem and kernel times problem are the same. This is confirmed by another similar VM we created on the same host which doesn't have either of the problems. VMWare tools are obviously installed. The nic is e1000. What else can we do to troubleshoot this?

  Read the article

• how to skip grub dual boot option menu entirely (without picking an OS to boot)

  - by bevcan izBevk

  I'd like to skip the entire Grub 2 interface, where I have to decide booting Linux or Windows im running linux ubuntu lastest version (14.04.1 LTS) and windows 8.1 both 64 bit versions. I've installed easyBCD software, which I want to use as (my only) boot manager. Issue: whenever I run my computer, I get grub interface to pick Linux or Windows, after that I get easyBCD interface where I have to pick linux or windows again. If both choices are the same, proper system boots, else I get thrown back to beggining (grub UI). I'd like to somehow delete / skip grub from appearing. TLDR title :) thank you for helping!

  Read the article

• Why won't Windows use the other CPU cores?

  - by revloc02

  In Windows Task Manager the Performance tab shows the first CPU maxed out, the other 7 just idling along with the occasional spike. What gives? More info: I've got 8GB and only 4.5GB are being used. The Processes tab has no indication of any process hogging processing power. In fact System Idle Process is 98-99. When I program stuff and have like 8 to 12 applications going (several directly unrelated to programming of course) my computer slows to a crawl. Sysyem Info: Intel Core i7-2600K Processor (quad-core with hyper-threading), 8GB RAM, Intel BOXDZ68BC LGA 1155 Motherboard, 500GB HDD

  Read the article

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• Asterisk is hacking itself [duplicate]

  - by Shirker

  This question already has an answer here: How do I deal with a compromised server? 11 answers I've got some strange logs on my asterisk (and there a lot of extensions were tried): chan_sip.c: Failed to authenticate device 6006<sip:[email protected]>;tag=f106f3fe but IP XX.XX.XX.39 is its OWN IP! cat /etc/asterisk/* | grep 6006 returns nothing. asterisk -rv Asterisk 11.4.0 How its possible, that its hacks itself? And how could I trace, where it comes from?

  Read the article

• Do TCP/UDP connections add to the Windows incoming connection limit?

  - by user47899

  Hi all, I've tried to figure out what Microsoft means by "Windows sockets" and it all seems very vague. Basically we have customers that sometimes try to set up workgroups with close to 10 Windows XP computers with drive and printer shares and we're worried that some of the non-Windows Ethernet devices on the network will cause issues with the inbound connection limit outlined here where only 10 inbound connections can be active at one time. For example, there is an Ethernet Caller ID device that broadcasts UDP packets to all computers, and a kitchen display system that likewise broadcasts UDP. They may also have incoming TCP packets for our custom online ordering module. Do these TCP/UDP connections count toward the inbound connection limit? I'm aware that Windows 7 has increased the limit to 20 but we might have future customers that will push that limit. Thanks in advance

  Read the article

• How can I import a CSV file into an SQLite table that doesn't allow null values?

  - by Philip

  I've been using the SQLite Manager extension for Firefox to edit my Chrome web data file in order to restore my keyword searches, and I think I have everything in place except that when I import a CSV file into a table, (a) it won't import into the actual table because the table doesn't allow null values (b) if I import it into a new table that does allow null values, then all the empty strings end up as null and I have to manually edit the row, type and delete a character, and then it's set to empty string and it's fine So: is there either a way to import the CSV so that empty cells are automatically turned into empty strings instead of null, OR is there a way once a table is imported that has null values to convert it into one that doesn't allow null values, where each formerly null value is the empty string? Thanks!

  Read the article

• How to restrict windows service to X cores?

  - by Martinnj

  I'm currently trying ot figure out a decent/nice way of determening what core(s) a single service should run on, in Windows Server 2008. I'm aware that for procceses there is two ways to do it: set affinity through task manager after proccess is launched. use "start /AFFINITY 0x1" or similar bitmask However this does not seem to work very well with services. When i try to launch the exe that the service will also run (the one that needs restriction) it just spawns a new commandline (and starts the process) but the process terminates shortly after. Does anyone here know how to do a similar trick for services? It is not important what core it is running on, it just needs to be restricted to only one. And preferably it should be something that can be automated, so we do not have to interfere when there is a server restart.

  Read the article

• How can I have a Windows 7 VMware guest without mouse support?

  - by Matthew Read

  Despite having vmmouse.present = "FALSE" mouse.vusb.absDisabled = "TRUE" pref.motionUngrab = "FALSE" in my .vmx file and a customized VMware Tools installation on the guest that does not include the mouse driver, I somehow have fully integrated mouse support for my Windows 7 VM. I can smoothly mouse from the host into the guest without needing to click or Ctrl+G in and Ctrl+Alt out. I don't want this because of the issues it causes with games. How can I get the VM to have no special mouse support while still having VMware Tools installed for its other functions (network, graphics, etc.)? The mouse works as I want without VMware Tools but not otherwise — again, despite not installing the mouse driver and having all those settings trying to disable it. Device Manager shows that the generic Windows PS/2 mouse driver is being used and not the virtual mouse driver. Guest and host are both Windows 7 Ultimate SP1, x86 and x64 respectively. I'm using VMware Player 3.1.4 and the VMware Tools installed is the latest, 8.4.6.16648.

  Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >