Search Results

Search found 23890 results on 956 pages for 'issue'.

Page 502/956 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

• How do I connect to a wireless network?

  - by Keith Groben

  I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

  Read the article

• How can I automatically change the priority of Javaw.exe when loading Minecraft?

  - by Arch Angel

  I launch Minecraft.exe which invokes Javaw.exe. I wish for Javaw.exe to be running in High priority because Minecraft lags if not. I tried invoking Minecraft.exe with a high priority by doing this: Start "Minecraft" /high "C:\Users\Barrie\Documents\Program Files\Minecraft\Minecraft.exe" This would work if it wasn't for Minecraft loading Javaw.exe. I would love a simple solution - perhaps a command I can put into the batch script - which will change the priority of Javaw.exe after it loads. Edit: I'd like to thank everyone for their response to my issue. I fixed this by executing Minecraft.exe with a batch script then calling an AHK script to change the priority of Javaw.exe.

  Read the article

• Installing a .NET framework on Windows 7?

  - by user23392

  I just switched to windows 7 from Vista and a lot of programs/games don't work anymore. The issue is that some games need a specific .NET framework version. when I try to install that it says that I should turn on/off windows features. I go to that and I find .NET framework in the list and tried both checking it and unchecking it. Both don't work and I still get the message that I need to turn on/off that thing. Any suggestion please? I have Windows 7 Ultimate 32-bit.

  Read the article

• df says disk is full, but it is not

  - by Chris

  On a virtualized server running Ubuntu 10.04, df reports the following: # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.4G 7.0G 0 100% / none 498M 160K 498M 1% /dev none 500M 0 500M 0% /dev/shm none 500M 92K 500M 1% /var/run none 500M 0 500M 0% /var/lock none 500M 0 500M 0% /lib/init/rw /dev/sda3 917G 305G 566G 36% /home This is puzzling me for two reasons: 1.) df says that /dev/sda1, mounted at /, has a 7.4 gigabyte capacity, of which only 7.0 gigabytes are in use, yet it reports / being 100 percent full; and 2.) I can create files on / so it clearly does have space left. Possibly relevant is that the directory /www is a symbolic link to /home/www, which is on a different partition (/dev/sda3, mounted at /home). Can anyone offer suggestions on what might be going on here? The server appears to be working without issue, but I want to make sure there's not a problem with the partition table, file systems or something else which might result in implosion (or explosion) later.

  Read the article

• Why does Hyper-V and Windows Backup crash (BSOD) after successfull backup?

  - by Payson Welch

  Hello I am running Server 2008 R2 with a handful of Hyper-V guest nodes. If Windows backup runs without any of the Hyper-V nodes running, the server is fine. If Hyper-V runs a backup while the Hyper-V nodes are running, it is fine until a few minutes after the backup completes, and then it BSODs. The storage location for the backup is iSCSI - I am wondering if anyone has any input on what might be causing this? I don't have the Hyper-V nodes setup on a vlan and there is only one NIC on the server. Is it possible this is a networking / driver issue, and if so how would I reconfigure the networking to fix this?

  Read the article

• Unable to deactivate windows xp by modifying the license in the registry

  - by ConorWalsh

  I need to deactivate windows xp so I can set it up with a new license. Every tutorial I've visited follow the same steps. (Example http://www.ehow.com/how_6665848_deactivate-windows-xp-pro.html) The tutorials state that the 00BE timer file located in the registry needs to be modified. It is found by going to the registry and navigating through "HKEY_LOCAL_MACHINE," "Software," "Microsoft," "WindowsNT," "CurrentVersion" and "WPAEvents." After the file is modified Windows should be deactivated. However it never does. The value changes but when I run the command to add a new license key it states "windows is already activated". I've done this before on other machines at it worked fine. I can't find any other methods to change the license in XP. Has anyone ever had this issue or knows of another way of deactivating windows?

  Read the article

• BES 5.x issues when connecting to Exchange 2010 SP2 RU4

  - by makerofthings7

  Ever since we updated from SP1 RU4 to SP2 RU4 we have noticed that our BES devices will simply stop receiving email. This has occurred at least 5 times in the past few weeks. Today, while speaking with RIM support (a T3 contract), they said that they have reports of sporadic connectivity issues from some BES users. This has been occurring with Exchange 2010 SP2 RU4, and have no public information to give us. We were able to temporarily get things running by doing any or all of the following Restart the BES server Recreate the MAPI profile (deleted the keys in the registry) Restart the CAS servers Wait it out (2 hours) What other options should I take to resolve this issue?

  Read the article

• Light on every model and not in the whole scene

  - by alecnash

  I am using a custom shader and try to pass the effect on my Models like that: foreach (ModelMesh mesh in Model.Meshes) { foreach (ModelMeshPart part in mesh.MeshParts) { part.Effect = effect; } mesh.Draw(); } My only issue is that every Model now has its own light source in it. Why is this happening and is this a problem of my shader? Edit: These are the parameters passed to the shader: private void Get_lambertEffect() { if (_lambertEffect == null) _lambertEffect = Engine.LambertEffect; //Lambert technique (LambertWithShadows, LambertWithShadows2x2PCF, LambertWithShadows3x3PCF) _lambertEffect.CurrentTechnique = _lambertEffect.Techniques["LambertWithShadows3x3PCF"]; _lambertEffect.Parameters["texelSize"].SetValue(Engine.ShadowMap.TexelSize); //ShadowMap parameters _lambertEffect.Parameters["lightViewProjection"].SetValue(Engine.ShadowMap.LightViewProjectionMatrix); _lambertEffect.Parameters["textureScaleBias"].SetValue(Engine.ShadowMap.TextureScaleBiasMatrix); _lambertEffect.Parameters["depthBias"].SetValue(Engine.ShadowMap.DepthBias); _lambertEffect.Parameters["shadowMap"].SetValue(Engine.ShadowMap.ShadowMapTexture); //Camera view and projection parameters _lambertEffect.Parameters["view"].SetValue(Engine._camera.ViewMatrix); _lambertEffect.Parameters["projection"].SetValue(Engine._camera.ProjectionMatrix); _lambertEffect.Parameters["world"].SetValue( Matrix.CreateScale(Size) * world ); //Light and color _lambertEffect.Parameters["lightDir"].SetValue(Engine._sourceLight.Direction); _lambertEffect.Parameters["lightColor"].SetValue(Engine._sourceLight.Color); _lambertEffect.Parameters["materialAmbient"].SetValue(Engine.Material.Ambient); _lambertEffect.Parameters["materialDiffuse"].SetValue(Engine.Material.Diffuse); _lambertEffect.Parameters["colorMap"].SetValue(ColorTexture.Create(Engine.GraphicsDevice, Color.Red)); }

  Read the article

• postfix: force server to send mail outside of localhost

  - by LoneWolfPR

  I have a php file that sends mail using the mail() function. The problem is one of the forms sends to a domain that is registerred on my server while having the mail handled on a different server. Postfix looks locally only. When it doesn't find the email address is rejects the message. How can I configure postfix to send mail to all domains through the internet and not locally? Update Ok. So it wasn't a postfix issue at all. I simply needed to turn off mail to that domain from the command line. For anyone that needs that command it is (at least on my system): /usr/local/psa/bin/domain --update example.com -mail_service false

  Read the article

• Using iTunes within Terminal Services 2008 R2 - Pitfalls etc

  - by Kristiaan

  I was hoping to get some further information on any possible Do's and Don't when it comes to installing, using and maintaining iTunes within a Termina Server environment. We have come across a situation in our company whereby some of our users who are using thin clients now need the ability to sync, update and manage their devices, previously they used either standard desktop systems or laptops so there was no issue with running iTunes. I have not found much information on the web about using iTunes within a Terminal Server Farm, Id like to find out if iTunes works within the environment, any known or common issues that occur due to running it like this.

  Read the article

• when connected to vpn, can't access certain things

  - by shsteimer

  my companies vpn is not a standard windows vpn. It uses Juniper Networks and it intalls locally something called "Host Checker" prior to allowing me to connect. I have noticed 2 things that I can't access while on vpn. etrade.com - no idea why this specific website, but I can't get to it, maybe https? use of my magik jack - I'm assuming this is some sort of a port conflict issue. if im on a call when i connect, i lose all reception. if i try to make a call after conected, ic an't even get it to dial. Can anyone tell me how I would even begin to debug this. I expect if I call the help desk they won't be much help, but if I can tell them the specific problems of conflicts, maybe I have a chance of them working with me to get it working.

  Read the article

• DFS: Error creating domain-based namespace "The namespace cannot be queried. The RPC server is unavailable."

  - by Scolytus

  I try to create a domain-based namespace but when I hit "next" on the "choose type wizard page" I get the message: The namespace cannot be queried. The RPC server is unavailable. I found one article regarding this problem, and indeed the DNS resolution of the DomainDNSName was flawed. But although I fixed this DNS issue, I still get this message. A stand-alone namespace can be created. Any ideas how to solve this problem? Is it possible that this is related to the fact that I'm using a single-lable domain name?

  Read the article

• Any way I can correct DNS spoofing against our domain

  - by brandon

  This morning I found out that our domain and subdomains have been poisoned on the 4.2.2 and 4.2.2.1 DNS servers along with others I think, though I have not confirmed others yet. Using OpenDNS resolution works correctly. I have updated our local DNS servers and cleared their cache which has fixed things internally. The issue is that the domain is public facing and customers are having problems. We are the authoritative DNS server for the domain and all that is under our control. What I don't know how to do is fix the name servers out of our control. Is there something we can do on our end? At the moment the only workaround I can think of is to ask customers to change their DNS to OpenDNS which is not very practical. The other workaround would be to change our TLD, which is less practical.

  Read the article

• Can't start program by PsExec on windows server 2003 64-bit

  - by Stan

  I ran PsExec on a windows server 2003 32-bit machine to remotely launch a program on a windows server 2003 64-bit machine. The program is a win32 program with dependency to msvcr80.dll, msvcp80.dll, msjava.dll, PocoFoundation.dll, PocoNet.dll. The process will freeze and looks like fail to start the user interface. However, the program was running fine if I log on that 64-bit machine and double click on it. What could be wrong with using PsExec to launch it? I use process explorer but couldn't find anything. Thanks. EDIT: An update, this issue is actually happening to every program that launch by psexec on that host. For example, if try to use psexec to launch notepad.exe, I can see the process name (notepad.exe) in task manager, and notepad tab on taskbar. But when click on notepad tab, the window won't show up. It looks like the application stuck in the middle of launching process.

  Read the article

• 32bit ODBC Postgres driver on Windows 2008 R2 x64

  - by uaise

  I'm trying to install the Postgres ODBC 32bit driver on a Windows 2008 R2 64bit machine. After installing it, with no errors, I go to the ODBC panel, the 32bit version under the /syswow64 folder and try to add the driver, select the Postgres driver from the list but I get an error 126, saying he can't find the driver at the specified path. The problem is that the path he shows me, is the exact path the driver is in, I double checked on the registery (on the HKLM\SOFTWARE\Wow6432Node\ODBC\ODBCINST.INI\ location) and it's fine there too. A couple more people on technet have the same issue too. Did anyone ever run into this? Any ideas would be greatly appreciated. edit: the driver works fine on my win7 x64 test machine, this behaviour only happens on the server.

  Read the article

• Is now the right time to move to .NET 4?

  - by bconlon

  The reason I pose this question is that I'm looking at WPF development and so using the latest version seems sensible. However, this means rolling out the .NET 4 runtime to PCs on old versions of the framework. Windows XP is still the number one O/S (estimated 40%+ market share). To run .NET 4 on XP requires Service Pack 3, and although it is good practice to move to the latest service packs, often large companies are slow to keep up due to the extensive testing involved. In fact, .NET 4 is not installed as standard with any Windows O/S as yet - Windows 7 and 2008 Server R2 have 3.5 installed. This is not quite as big an issue as it was for .NET 3.5 as .NET 4 is significantly smaller as it doesn't include the older runtimes - .NET 3.5 SP1 included .NET 3 and .NET 2 and was 250MB, although this was reduced by doing a web install. The size is also reduced a bit if you target the .NET 4 Client Profile, which should be OK for many WPF applications, and I think this may be rolled out as part of Windows service packs soon. But still, if your application is only 4-5 MB and you need 40-50 MB of Framework it is worth consideration before jumping in and using the new shiny features. #

  Read the article

• Randomly Freezes - How Can I Diagnose the Problem?

  - by j0rd4n

  At random times, Ubuntu 10.04 freezes, and I have to do a hard shutdown. It was upgraded from 9.10 which didn't freeze. First, is this is common problem with a quick answer, and if not, what can I do to diagnose it? I've tried checking application/kernel logs, but nothing gives me a clue as to what caused the problem. My guess, is that since the OS froze, no logs could be updated. Ideas? SOLUTION: Solved it. My particular problem was my graphics card (integrated Radeon 9000 series). netconsole revealed I was getting the error: "reserve failed for wait". After trial-and-error, I manually configured my video card and disabled hardware acceleration. Completely fixed the issue. Here is what I did: Manually Created xorg.conf Ubuntu automatically configures xorg.conf and doesn't use a file. To edit this file, you have to tell Ubuntu to explicitly create one and then edit it. Here are the steps: Restart system Hold Shift as GRUB boots Select root terminal in GRUB login menu Execute: X -config xorg.conf.new Copy: cp xorg.conf.new /etc/X11/xorg.conf Disable Hardware Acceleration The following is specific to my Radeon card, but I'm sure other cards have a similar setup. Edit xorg.conf Find "Device" section for graphics card Uncomment "NoAccel" option and set to "True" Save + reboot Hope that helps.

  Read the article

• Laptop loses signal from WiFi router, but mobile phone holds it fine

  - by Anton

  Hi, I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

  Read the article

• vmware player - ubuntu can resolve hostname but ping fails

  - by recursive_acronym

  Using VMware players on Windows 7 with a Ubuntu 10.04 guest. When I ping it resolves the ip address but the ping fails. Hopefully this is a local issue as I don't have access to any of the network equipment (routers, etc). vmware tools is installed. Is there any other information I can provide to help resolve this? eth0 Link encap:Ethernet HWaddr 00:0c:29:83:4f:c0 inet addr:192.168.163.129 Bcast:192.168.163.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe83:4fc0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:50006 (50.0 KB) TX bytes:16701 (16.7 KB) Interrupt:19 Base address:0x2024 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)

  Read the article

• Verizon Fivespot firewall

  - by Patrick

  I have a Verizon Fivespot Wi-Fi router and am having issues connecting to the computer that uses it to get on the internet. I am able to connect to the Fivespot admin pages remotely and I am able to connect to the internet from the computer behind the Fivespot. There are two sections pertinent to this issue, Port Filtering And, Port Forwarding I've tried each individually and both together but cannot access anything through the router except for the admin page. I am trying to connect through SSH to an Ubuntu 10.04 box over wifi. I have called Verizon Tech Support but they were unhelpful, the person essentially read what it says on each screen without any elaboration. Any help is greatly appreciated!

  Read the article

• How long does it take for a server to get 'off greylisting'

  - by Michael

  Hi all, I asked a question regarding email delays a few months ago, and I think I found a workaround. I changed our email from "[email protected]" to "[email protected]", and it seems to work instantly again. After reading some articles, I believe this could be due to some form of greylisting, though some servers might call it something else -- if a server like yahoo or gmail receive email from a server that it is not used to receiving email from, then sometimes the delay occurs. But a name such as yahoo, gmail, which requires a user to sign up manually -- this delay can be avoided. My question is this: does anyone know more about this issue -- especially since it would be nice to send an email from our own site, instead of needing to use a whitelisted server? Thanks!

  Read the article

• Is there a way to rsync in batches?

  - by Chris

  I have a huge chunk of data (11G) in a subversion repository that I'm using rsync to migrate to Alfresco, which lucene indexes new files as they hit the file system. I'm using a dav mount as a proxy to allow me to rsync. The issue I'm having is the indexing post-rsync is quite an expensive operation for such a huge chunk of data, so I was wondering whether there's a way I could logically separate the rsync into identically-sized batches (say 500MB each) so I could schedule them in cron. At the moment, I'm traversing the top level folders and taking the smallest ones across first, but once I'm done with those, the much larger sub-directories are going to be quite troublesome. Please let me know if you need any further info. Thanks in advance.

  Read the article

• How to play audio through a bluetooth headset in Windows 7.

  - by palehorse

  I recently did an in-place upgrade from Vista to Windows 7 RTM. For the most part, things have went brilliantly. The only issue I've been facing is regarding my bluetooth headset, a Dell BH200. The laptop is an Inspiron 1720. I can get Windows 7 to pair with the headset, and even get the bluetooth settings to show that there is stereo audio available. The problem is that the bluetooth headset never shows up in my sound output devices list. I've uninstalled and reinstalled the bluetooth drivers from Dell, tried turning on/off all of the features of the headset, removing the bluetooth driver and letting windows redetect and install but nothing has worked so far. I guess I should mention that the headset worked fine in Vista. Anyone have any ideas?

  Read the article

• 500 internal server error

  - by Rockr

  I am facing 500.0 Internal server quite frequently with my website. The error details are given below. HTTP Error 500.0 - Internal Server Error C:\PHP\php-cgi.exe - The FastCGI process exceeded configured activity timeout Module FastCgiModule Notification ExecuteRequestHandler Handler PHP_via_FastCGI Error Code 0x80070102 Requested URL http://mydomain.com:80/index.php Physical Path C:\HostingSpaces\coderefl\mydomain.com\wwwroot\index.php Logon Method Anonymous Logon User Anonymous When I contacted the support team, they're saying that my site is making heavy SQL Queries. I am not sure how to debug this. But my site is very small and the database is optimized. I'm running wordpress as platform. How to resolve this issue?

  Read the article

• Multiplayer approach for tablets on wi-fi (FPS/TPS)? Server authority, etc

  - by Fraggle

  Looking for some guidance or what has worked well for others in implementing a multiplayer FPS/TPS type game on tablets (probably just 2-6 players at a time). The main issue being that tablets/phones are typically "less" connected than say a console or pc might be. And therefore, my thought is that to have complete Server authority of everything is not going to work. But maybe I'm off base on that. So I guess I'm struggling with what (if anything) should happen on a central server and what should happen locally. Or is centralized approach even needed? Some approaches I might do: Player movement : my thought is to control this locally (player-owner) and update server with positon (which then sends out to other clients). Use client side prediction for opponent players so that connection loss will not show a plane for example stop in mid air. Server will send update and try to smoothly correct an opponent player position to server updated one.But don't update owners position on owners device from server. Powerups (health kit/ammo/coins/etc) : need to see them disappear immediately, so do it locally. Add the health locally, but perhaps allow for server correction. If server doesn't see player near that powerup, reject the powerup and adjust server health for player. Fire weapons: Have to see it happen right away, so fire locally, create local bullet and send on its way. Send rpc to server so that this player on other clients also fires. Hit detection: Get's trickier. Make bullet/projectile disappear locally, and perhaps perform local hit animations (shaking, whatever). non-authoritative approach= take the damage locally and send rpc to server or others to update health and inform of hit. Authoritative approach-Don't take the damage, or adjust health. Server will do that if it detects a hit. Anyway that's my current thought stream. Let me know what you think of the above or what has worked for you.

  Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >