Search Results

Search found 2366 results on 95 pages for 'cat mitch'.

Page 51/95 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • Difference between tcp recv buffer and tcp receive window size?

    - by pradeepchhetri
    The command shows the tcp receive buffer size in bytes. $ cat /proc/sys/net/ipv4/tcp_rmem 4096 87380 4001344 where the three values signifies the min, default and max values respectively. Then I tried to find the tcp window size using tcpdump command. $ sudo tcpdump -n -i eth0 'tcp[tcpflags] & (tcp-syn|tcp-ack) == tcp-syn and port 80 and host google.com' tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 16:15:41.465037 IP 172.16.31.141.51614 > 74.125.236.73.80: Flags [S], seq 3661804272, win 14600, options [mss 1460,sackOK,TS val 4452053 ecr 0,nop,wscale 6], length 0 I got the window size to be 14600 which is 10 times the size of MSS. Can anyone please tell me the relationship between the two.

    Read the article

  • Debian date jumping, causing complete lockup

    - by artfulrobot
    I have a Debian Squeeze VM that has suddenly chosen to jump it's date forwards just over a month, which seems to confuse it no end and cause it to require a hard reset (yikes!). There is nothing unusual in the logs, except that the datestamp suddenly jumps (today back to 2005). It's happened three times, so I don't think it's to do with the leap second issue as the last one of those was in July. When it happened once I spent ages checking stuff but could not find anything, decided to forget it. But three times is becoming an issue on a production server. Edits providing information requested in comments (thanks!): I do not have control over the hypervisor, it is a hired VM. # cat /sys/devices/system/clocksource/clocksource0/current_clocksource kvm-clock # ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== +grendel.exizten 130.149.17.8 2 u 29 64 77 14.811 1.778 1.744 *panoramix.linoc 193.67.79.202 2 u 32 64 77 19.729 -0.419 1.691 +robert.elnounch 213.251.128.249 2 u 27 64 77 17.762 0.600 1.722 -janetzki.eu 83.169.43.165 3 u 31 64 77 27.214 3.575 1.638

    Read the article

  • Howto find internal IP server by external IP

    - by HWTech
    I've got 12 servers in datacenter, but can login by SSH into one of them (facade server), other servers available only from it. In hosts file we have ip list each of available servers. milkov@devel:/var/www/davel$ cat /etc/hosts 192.168.1.4 data1 192.168.1.7 data2 192.168.1.5 bground1 192.168.1.6 bground2 192.168.1.10 frontend1 192.168.1.11 frontend2 ... Also I've domain megaplan.tvigle.ru (IP 79.142.100.36). Question: How to know which one of servers serve this domain? How to find servers internal ip-address by external IP. PS: Sorry about my Eng. lng

    Read the article

  • OOM-Killer called every now and then..

    - by SpyrosP
    Hello there, i have a dedicated server where i've installed apache2, as well as Rails Passenger. Although i have 2GBs of RAM and most times about 1,5GB is free, there are some random times when i lose ssh and generic connectivity because oom-killer is killing processes. I suppose there is a memory leak but i cannot find out where it comes from. oom-killer kills apache2, mysql, passenger, whatever. Yesterday, i did a "cat syslog | grep -c oom-killer" and got 57 occurences ! It seems that something seriously destroys the memory. Once i reboot, everything comes back to normal. I suspect that it can be related to Passenger, but i'm still trying to figure it out. Can you think of anything else, or do you have anything to suggest that will make the leak identification procedure easier ? (i was even thinking of writing a bash script, to be run with cron for like every 5 minutes).

    Read the article

  • postfix "mail-pipe" alias shellscript creates permissionless files/dirs

    - by Gung Foo
    I am using an alias to a shellscript in postfix... After the script that is called by the shellscript creates a directory it has no permissions at all.. #!/bin/sh umask 002 cat | php /var/www/html/catchmymail rcvemail result is like this: d--------- 2 apache apache 4096 Sep 17 17:25 50 it works for files tho: -rw-rw---- 1 apache apache 5836288 Sep 18 11:21 test Not even setting umask 002 in the shellscript before it hands the mail on changes a thing Setting umask(0002) inside catchmymail has no effect either. Has anyone seen this behaviour before or an idea to save my day?!? This is extremely confusing and actually insane behaviour from what i understand about umask and file permissions.

    Read the article

  • How to test KVM guest CPU maximum allocation limit?

    - by Ace
    Running Ubuntu 13.04 Host and vm Guest. Using virtio for hdd, nic. Max-allocaion CPU cores is 6, minimum is 2. Ive made a vm with virt-manager just to play with, and to test out kvm. Alright, I have a decent understand how the memory balloon driver works, but I still dont know how to test if the guest OS can utilize the max setting for cpu cores. From what i gather, the host will start one thread of qemu for each core allocated per vm. When i run htop inside the guest, it only shows two cores. (also here is the output of cat /proc/cpuinfo: https://gist.github.com/anonymous/93a361545130923537da ) How can I "force" the guest to allocate the other 4 cores so that it can show 6 cores in htop? Is there a way to do this?

    Read the article

  • ubuntu input/output error

    - by rplevy
    I'm having a problem with Ubuntu that I'm finding hard to troubleshoot for reasons that will become clear: reboot -bash: /sbin/reboot: Input/output error dmesg -bash: /bin/dmesg: Input/output error ps -e ps: error while loading shared libraries: /lib/libproc-3.2.8.so: cannot read file data: Input/output error lsof -bash: /usr/bin/lsof: Input/output error fsck -bash: /sbin/fsck: Input/output error badblocks -bash: /sbin/badblocks: Input/output error So I can't see what is going on, and I can't remotely reboot. What can I do to get to the bottom of this? Interestingly: init 0 Segmentation fault I can cat /var/syslog but not /var/log/messages or several other important files. less and more don't work, neither do tail or head, etc.

    Read the article

  • How to mount remote samba share from local host with multiple groups?

    - by Dragos
    I am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this: mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000 $ cat .credentials username=user password=password I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has? Is there a way to: Mount the remote samba with multiple groups on the local system? Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs. Other solutions would be: nautilus sftp:// which runs through gvfs; but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. And the last solution would be NFS but that means that I have to synchronize the uids and gids on the local system with the ones from the server.

    Read the article

  • My D-Link's Ethernet bridge downlink just got 10-30x slower?

    - by Jay Levitt
    TL;DR: I unplugged my network to move my desk, and now downloading via my DIR-655's Ethernet LAN bridge is 10-30x slower than the Ethernet switch it's plugged into. Background My network is SMC cable modem <-> Cisco firewall <-> Netgear switch <-> D-Link WiFi† | | | | SMC8014 ASA-5505 GS608v2 gigE DIR-655 rev A3 gigE †The DIR-655 is used as an access point, not a router (although what D-Link calls an access point, I'd call a bridge). The "WAN" port is unused; the Netgear connects to the built-in 4-port Ethernet LAN switch, inside the built- in router/firewall. Endpoints: MacBook Pro 17" mid-2010 iPhone 4S Fedora 12 Linux server running reasonably fast dual-Athlon X2, VelociRaptors, etc. All cables are <10 feet, mostly CAT-5e, some CAT-6, all premade. All WiFi endpoints are within three feet of the D-Link. Yesterday I unplugged and rearranged stuff, and now connecting via the D-Link - even through the wired switch, right next to the incoming network cable - is 30x slower than connecting directly to the Netgear switch, on both my MacBook and iPhone. How I'm measuring "slower" I'm mostly using http://speedtest.net, which of course only really measures broadband speeds. I've also installed http://www.speedtest.net/mini.php on my local server, but can't test the iPhone with that. Results Speedtest.net, closest server over Comcast business-class: CONFIG | PING (ms) | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> Netgear | 9 | 31.6 | 6.8 Mac <-> Ethernet <-> D-Link | 8 | 4.1 | 6.0 Mac <-> WiFi <-> D-Link | 9 | 1.4 | 2.9 iPhone <-> WiFi <-> D-Link | 67 | 0.4 | 1.6 Speedtest Mini on Linux PC: CONFIG | DOWN (Mbps) | UP (Mbps) Mac <-> Ethernet <-> NetGear | 97.2 | 76.9 Mac <-> Ethernet <-> D-Link | 8.2 | 24.2 Mac <-> WiFi <-> D-Link | 1.0 | 8.6 Slow typing in SSH: Mac <-> Ethernet <-> Netgear <-> Linux PC: smooth Mac <-> Ethernet <-> D-Link <-> Linux PC: choppy Note that D-Link upload speeds are normal on broadband, slower locally (but I'd believe that's a D-Link limitation), and always faster than the downloads! Since ssh is choppy just with slow typing, I don't believe it's a throttling-type problem either; that's not a lot of bandwidth. What I've tried Swapping all "good" and "bad" cables Re-plugging "bad" cable from D-Link to Netgear and watching it be the "good" cable pulling cables away from power lines Verify that the Mac auto-detects the D-Link as gigE Try to verify the link speed of the D-Link <- Netgear connection, but the firmware doesn't report that Verify that the D-Link sees no TX/RX errors or collisions Use different Ethernet ports on both Netgear and D-Link Reset the D-Link to factory settings Upgrade the D-Link firmware from 1.21 to 1.35NA, 2010/11/12, the latest Reboot everything at least once On the Mac, disable Wi-Fi during the Ethernet tests, and unplug Ethernet during the Wi-Fi tests Using iStumbler, verify that the D-Link isn't picking overloaded Wi-Fi channels (usually just 1-5 neighbors on my and adjacent channels, average for my apt building) Verify that the only client connected to the Wi-Fi was the iPhone Verify that nothing was being chatty on my network according to the WISH log Enable and disable all sorts of D-Link settings, including forcing WAN auto-detect to gigE So. I don't mind buying a new access point—I wouldn't mind having a dual-link network—but as a guy who's been networking since gated v4 was a drastic rewrite, and who often used physical sniffers in the days before Wireshark, I'm baffled. I hate being baffled. What could I possibly have changed that would result in this? How can I measure it? All I can think of is a static zap—thick carpet, socks, HVAC—but I didn't feel one, and does that really happen anymore? Can I test if it's Ethernet vs. TCP layer slowness? I'm not familiar with modern network utilities; it's hard to Google without hitting "Q: Why is my network slow? A: Is your microwave on?" If I don't get an answer here, will someone big and powerful help me migrate it to serverfault without getting screamed back here? In the words of Inigo Montoya, "I must know." Don't get all Dread Pirate Roberts on me.

    Read the article

  • How do I unmount a tmpfs that is missing from /etc/mtab?

    - by vrinek
    I have the following line in /etc/fstab: none /home/hydra/tmp tmpfs user,noauto,size=1000M,uid=1001,gid=1001 0 0 I can do mount ~/tmp as user hydra and it gets mounted ok. The only problem is that even thought it gets added to /proc/mounts, it does not get added to /etc/mtab. When I try a umount ~/tmp (again as hydra) it complains: umount: /home/hydra/tmp is not mounted (according to mtab) And when I try -f or -n, it complains that I am not root. Some more info on the system that manifests this problem: On sudo umount /home/hydra/tmp, the fs gets unmounted (I think I needed to used -f too) Debian version is testing mount --version - mount from util-linux 2.19.1 (with libblkid and selinux support) ls -l /etc/mtab - -rw-r--r-- 1 root root 921 Nov 14 09:08 /etc/mtab cat /proc/mounts | grep rootfs - rootfs / rootfs rw 0 0 /home, /home/hydra nor /home/hydra/tmp are symbolic links

    Read the article

  • Linux says a kernel module has an unknown symbol, but another loaded module provides it.

    - by raldi
    I'm trying to install a driver for a USB DAQ box, which annoyingly, I have to compile myself. I believe I've succeeded -- I have two .ko files: -rw-r--r-- 1 root root 45271 2010-03-18 21:24 advdrv_core.ko -rw-r--r-- 1 root root 24312 2010-03-18 21:24 usb4761.ko I was able to run insmod on the first without incident, but when I try on the second, I get a flood of messages: kernel: [686782.106547] usb4761: no symbol version for adv_process_info_check_event kernel: [686782.106555] usb4761: Unknown symbol adv_process_info_check_event kernel: [686782.106691] usb4761: no symbol version for advdrv_unregister_driver kernel: [686782.106695] usb4761: Unknown symbol advdrv_unregister_driver However, advdrv_core.ko provides these symbols. My kernel sure seems to have them in memory: # cat /proc/kallsyms | grep advdrv_unregister_driver f8d88504 r __ksymtab_advdrv_unregister_driver [advdrv_core] f8d888d2 r __kstrtab_advdrv_unregister_driver [advdrv_core] f8d885a4 r __kcrctab_advdrv_unregister_driver [advdrv_core] 086eb8fb a __crc_advdrv_unregister_driver [advdrv_core] f8d86e90 t advdrv_unregister_driver [advdrv_core] Why does my insmod claim they're unknown symbols?

    Read the article

  • terminal tools and logs for debugging TCP issues

    - by kellogs
    I have a server which I am testing for functionality (not load, not stress) with tsung. 50 users / second, 100 total users. Judging from tsung (tsung is the testing framework) graphs, there TCP connections (red line) drops to 0 while the commenced user sessions (green line) does not. Server logs show nothing to be gripping onto, so I am speculating some kind of TCP issue. Should this be the case ? Where would I look further on the server, any logs / tools to be looking at ? Only SSH available, no GUI. > root@XMPP:~# cat /etc/lsb-release > DISTRIB_ID=Ubuntu > DISTRIB_RELEASE=11.10 > DISTRIB_CODENAME=oneiric > DISTRIB_DESCRIPTION="Ubuntu 11.10" Thank you

    Read the article

  • Beam display from any computer to shared display

    - by rcourtna
    There are probably a lot of ways to skin this cat. Looking for the cleanest. In our office, we have a large display in a common area. We want to allow any computer in our office (mac, linux, windows) to output its video on the large display. Since some of the computers in the office are stationary, and it's not practical to run video cables everywhere, it would be preferable to make this all happen through the network. It is also possible for us to connect a dedicated (& networked) PC to the large display. How can I do this?

    Read the article

  • Munin "Available entropy" when using address space layout randomization

    - by clawspoon
    Having just configured munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

    Read the article

  • zsh completion will not work in emacs shell

    - by benhsu
    I'm learning about the more powerful tab-completion and expansion capabilities of zsh, and they don't seem to work when I run zsh under emacs with M-x shell: cat $PATH<TAB> expands the tab variable in Terminal, but in shell-mode it just beeps. I poked around the emacs environment and here's what I found: TAB (translated from ) runs the command completion-at-point, which is an interactive compiled Lisp function in `minibuffer.el'. It is bound to TAB, . (completion-at-point) Perform completion on the text around point. The completion method is determined by `completion-at-point-functions'. completion-at-point-functions is a variable defined in `minibuffer.el'. Its value is (tags-completion-at-point-function) So I'm surmising I need to add a function to completion-at-point-functions, but which one?

    Read the article

  • nfs server on cygwin slow

    - by Weltenwanderer
    The setup: We run an instance of cygwin nfsd on a Windows 2008 Server (Xeon 3,2 GHz). There are several Sun Solaris and SunOS machines accessing the shares. This is the exports file: /disk3 (rw,all_squash) /disk2 (rw,all_squash) Those paths are soft linked to the relevant cygdrive/d/path/to/dir paths. Some of the folders contain up to 10k files. The Problem: ls -la on the mounted folder on the sun boxes takes 2 - 3 minutes and the general read performance is really bad. cat filename displays the file in slow bursts and this hurts performance on tasks that access those shared files heavily. Processor load is not the issue, the nfs server idles most of the time, the cygwin tasks never get over 1% load.

    Read the article

  • Excel graph: turn stacked bar chart into part bullet chart

    - by Mike
    I've a simple data file that has one column of actuals and another of target against categories. I would like to turn the TARGET figure into a 'Bullet marker'. I've seen it done on other graphs but I'm struggling with the category column being overwritten with the xy axis values. Or if I get close to doing it then the xy markers are not central. I've checked out Peltier but his examples are based on even more comlicated data than mine, so the steps required didn't seem to match up. Help greatly appreciated. Thanks Mike. Example Data: Cat Actual target A 10 15 B 10 12 C 20 17

    Read the article

  • Seasgate GoFlex NAS + Horrible Speed = Bad Experience

    - by Jon H
    I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

    Read the article

  • File ownership and permissions on web site PHP files

    - by columbo
    Hello, I am learning the basics of linux servers so I am green. I have an Ubuntu server upon which there are websites that I have inherited. In a fit of security worry I decided to check out the ownership of the web site files. They are all 2016:sites. If I run the command 'cat /etc/group | more' I can see that the group exists. But when I run 'lastlog' the user 2016 does not appear. I started to worry that 2016 might be the username of web users connecting from the web so I set the permissions on a testfile to chmod 600, giving read permissions to only the file owner. Sure enough I could still access the file from the web. Can anyone suggest what is going on here? I tried creating a new user and giving them file ownership but then when I access the file from the web it wants me to have all directories up stream owned by the same person. Thanks

    Read the article

  • Where is debian storing its network settings?

    - by user13743
    I have a debian machine that is supposed to have a static ip, but insists on getting its address from the DHCP server. Here's this settings file: $> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.99 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 Yet $> sudo /etc/init.d/networking restart Reconfiguring network interfaces...done. $> sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:e0:03:09:05:2e inet addr:192.168.1.205 Bcast:255.255.255.255 Mask:255.255.255.0 ... Where is it being told to use dhcp?

    Read the article

  • CentOS 6: Can not start NFS

    - by Chris
    I am unable to start the NFS service. When starting there is no error. But the services are stopt after it. No messages at all in /var/log/messages. Same happens to rpcbind serivce. Any idea what this could be? I also tried to disable iptables. [root@server1 ~]# service nfs start [root@server1 ~]# service nfs status rpc.svcgssd is stopped rpc.mountd is stopped nfsd is stopped rpc.rquotad is stopped [root@server1 ~]# service rpcbind start [root@server1 ~]# service rpcbind status rpcbind is stopped [root@server1 ~]# cat /etc/exports /tmp *(ro) [root@server1 ~]# chkconfig --list | egrep '(rpcbind|nfs)' nfs 0:off 1:off 2:on 3:on 4:on 5:on 6:off nfslock 0:off 1:off 2:on 3:on 4:on 5:on 6:off rpcbind 0:off 1:off 2:on 3:on 4:on 5:on 6:off

    Read the article

  • Methodologies for performance-testing a WAN link

    - by Chopper3
    We have a pair of new diversely-routed 1Gbps Ethernet links between locations about 200 miles apart. The 'client' is a new reasonably-powerful machine (HP DL380 G6, dual E56xx Xeons, 48GB DDR3, R1 pair of 300GB 10krpm SAS disks, W2K8R2-x64) and the 'server' is a decent enough machine too (HP BL460c G6, dual E55xx Xeons, 72GB, R1 pair of 146GB 10krpm SAS disks, dual-port Emulex 4Gbps FC HBA linked to dual Cisco MDS9509s then onto dedicated HP EVA 8400 with 128 x 450GB 15krpm FC disks, RHEL 5.3-x64). Using SFTP from the client we're only seeing about 40Kbps of throughput using large (2GB) files. We've performed server to 'other local server' tests and see around 500Mbps through the local switches (Cat 6509s), we're going to do the same on the client side but that's a day or so away. What other testing methods would you use to prove to the link providers that the problem is theirs?

    Read the article

  • Dovecot and StartSSL problems with issuer

    - by knoim
    I am using dovecot (1) and trying to get my StartSSL certificate running. ssl_key_file points to my private key I tried pointing ssl_cert_file to my public key, with and without using the class1 certificate from http://www.startssl.com/certs/sub.class1.server.ca.pem as ssl_ca_file aswell as combing them with cat publickey sub.class1.server.ca.pem chained My mail client keeps telling me the certificate has no issuer, but doing openssl x509 on my public certificate tells me it is C=IL, O=StartCom Ltd., OU=Secure Digital Certificate Signing, CN=StartCom Class 1 Primary Intermediate Server CA My option for the CSR were: openssl req -new -newkey rsa:4096 -nodes Dovecot's log doesn't mention any problems. EDIT: Doesn't seem to be a problem with dovecot. I am having the same problem with postfix. openssl verify gives me the same error.

    Read the article

  • How to use public-key ssh authentication

    - by Poma
    I have 2 ubuntu 12.04 (beta) servers (node1 and node2) and want to establish passwordless root access between them. Other users should not have access to other boxes. Also note that ssh default port is changed to 220. Here's what I did: sudo -i cd /root/.ssh ssh-keygen -t rsa # with default name and empty password cat id_rsa.pub > authorized_keys then copied id_rsa & id_rsa.pub to node2 and added id_rsa.pub to authorized_keys. Both hosts have the same /root/.ssh/config file: Host node1 Hostname 1.2.3.4 Port 220 IdentityFile /root/.ssh/id_rsa Host node2 Hostname 5.6.7.8 Port 220 IdentityFile /root/.ssh/id_rsa Now the problem is that when I type ssh node2 it asks me for password. What may be the problem?

    Read the article

  • How to use second volume devide of amazon EC2

    - by Khoyendra Pande
    I have two volumes of amazon EC2 where by default 1 GiB volume using which has fulled. Now I want to use my second volume which is 9 Gim. I used command cat /proc/partitions I got major minor #blocks name 202 1 1048576 xvda1 202 80 9437184 xvdf Then I hit mkfs.ext3 -F /dev/sdf its showing mkfs.ext3: No such file or directory while trying to determine filesystem size then I hit command df and I got Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 1032088 1031280 0 100% / tmpfs 313160 8 313152 1% /lib/init/rw udev 297800 24 297776 1% /dev tmpfs 313160 4 313156 1% /dev/shm overflow 1024 32 992 4% /tmp means still I am unable to use my 9 GiB space Volume. I am conform I have two volume where attachment information is i-7e4fb41c:/dev/sda1 (attached) and i-7e4fb41c:/dev/sdf (attached) where only sda1 is using. Any one know how may I use my second volume(sdf). Thx

    Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >