Search Results

Search found 2366 results on 95 pages for 'cat mitch'.

Page 52/95 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • What is the right way to use Internet Sharing in OS X?

    - by Bob King
    For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

    Read the article

  • How to mount remote sambe from local host with multiple groups ?

    - by Dragos
    I am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this: mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000 `$ cat .credentials username=user password=password I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has ? Is there a way to: 1) Mount the remote samba with multiple groups on the local system ? 2) Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs. Other solutions would be: nautilus sftp:// which runs through gvfs but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. An the last solution would be nfs but that means that I have to synchronize the uids and gids on the local system with the ones from the server.

    Read the article

  • Cat5 wiring in my home [closed]

    - by Mike
    I have problem with cat5 cabling First I ran a length of cable 30 metres to my bedroom 1 and and connected both ends to a wall sockets internally using my punch down tool, both ends look fine. I also ran a cable from bedroom 1 to bedroom 2 so my son can use same internet connection , i then parallel connected my cables in bedroom 1 against using punch down tool using same colours all the way through. I ran a Ethernet cable from modem to first wall socket close to it then at bedroom end used another Ethernet cable to connect pc, it wouldn't connect to pc so I disconnected bedroom 2 cable from bedroom 1 socket. I connected bedroom 1 to pc and it worked, but how do I connect bedroom 2 (obviously cat 5 cable bedroom 1 to 2 is in place) As soon as I connect one wire from bedroom2 I loose Internet connection!

    Read the article

  • ldirectord ipvsadm not show reals ip and not work wtih pacemaker and corosync

    - by miguer27
    first thanks for your time. I'm having a problem with ldirectord that I can not solve, I comment my situation: I have two nodes with pace maker and corosync and configure somes resources: root@ldap1:/home/mamartin# crm status Last updated: Tue Jun 3 12:58:30 2014 Last change: Tue Jun 3 12:23:47 2014 via cibadmin on ldap1 Stack: openais Current DC: ldap2 - partition with quorum Version: 1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff 2 Nodes configured, 2 expected votes 7 Resources configured. Online: [ ldap1 ldap2 ] Resource Group: IPV_LVS IPV_4 (ocf::heartbeat:IPaddr2): Started ldap1 IPV_6 (ocf::heartbeat:IPv6addr): Started ldap1 lvs (ocf::heartbeat:ldirectord): Started ldap1 Clone Set: clon_IPV_lo [IPV_lo] Started: [ ldap2 ] Stopped: [ IPV_lo:1 ] root@ldap1:/home/mamartin# crm configure show node ldap2 \ attributes standby="off" node ldap1 \ attributes standby="off" primitive IPV-lo_4 ocf:heartbeat:IPaddr \ params ip="192.168.1.10" cidr_netmask="32" nic="lo" \ op monitor interval="5s" primitive IPV-lo_6 ocf:heartbeat:IPv6addrLO \ params ipv6addr="[fc00:1::3]" cidr_netmask="64" \ op monitor interval="5s" primitive IPV_4 ocf:heartbeat:IPaddr2 \ params ip="192.168.1.10" nic="eth0" cidr_netmask="25" lvs_support="true" \ op monitor interval="5s" primitive IPV_6 ocf:heartbeat:IPv6addr \ params ipv6addr="[fc00:1::3]" nic="eth0" cidr_netmask="64" \ op monitor interval="5s" primitive lvs ocf:heartbeat:ldirectord \ params configfile="/etc/ldirectord.cf" \ op monitor interval="20" timeout="10" \ meta target-role="Started" group IPV_LVS IPV_4 IPV_6 lvs group IPV_lo IPV-lo_6 IPV-lo_4 clone clon_IPV_lo IPV_lo \ meta interleave="true" target-role="Started" location cli-prefer-IPV_LVS IPV_LVS \ rule $id="cli-prefer-rule-IPV_LVS" inf: #uname eq ldap1 colocation LVS_no_IPV_lo -inf: clon_IPV_lo IPV_LVS property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1401264327" rsc_defaults $id="rsc-options" \ resource-stickiness="1000" The problem is in the ipvsadm only show a one real IP, when i configured two now, show the ldirector.cf: root@ldap1:/home/mamartin# ipvsadm IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags - RemoteAddress:Port Forward Weight ActiveConn InActConn TCP ldap-maqueta.cica.es:ldap wrr - ldap2.cica.es:ldap Route 4 0 0 TCP [[fc00:1::3]]:ldap wrr - [[fc00:1::2]]:ldap Route 4 0 0 root@ldap1:/home/mamartin# cat /etc/ldirectord.cf checktimeout=10 checkinterval=2 autoreload=yes logfile="/var/log/ldirectord.log" quiescent=yes #ipv4 virtual=192.168.1.10:389 real=192.168.1.11:389 gate 4 real=192.168.1.12:389 gate 4 scheduler=wrr protocol=tcp checktype=on #ipv6 virtual6=[[fc00:1::3]]:389 real6=[[fc00:1::1]]:389 gate 4 real6=[[fc00:1::2]]:389 gate 4 scheduler=wrr protocol=tcp checkport=389 checktype=on and in the logs I see nothing clear: root@ldap1:/home/mamartin# ldirectord -d /etc/ldirectord.cf start DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.11:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.11:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 0) DEBUG2: Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) DEBUG2: Disabled real server=on:tcp:192.168.1.12:389:::4:gate:\/: (virtual=tcp:192.168.1.10:389) DEBUG2: Checking on: Real servers are added without any checks DEBUG2: Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) DEBUG2: Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Running system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) Destination already exists root@ldap1:/home/mamartin# cat /var/log/ldirectord.log [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Quiescent real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 0) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.12:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t 192.168.1.10:389 -r 192.168.1.12:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: 192.168.1.12:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: 192.168.1.11:389 (tcp:192.168.1.10:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: 192.168.1.11:389 (192.168.1.10:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::2]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] system(/sbin/ipvsadm -a -t [[fc00:1::3]]:389 -r [[fc00:1::2]]:389 -g -w 4) failed: [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Added real server: [[fc00:1::2]]:389 ([[fc00:1::3]]:389) (Weight set to 4) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Resetting soft failure count: [[fc00:1::1]]:389 (tcp:[[fc00:1::3]]:389) [Tue Jun 3 09:39:29 2014|ldirectord.cf|19266] Restored real server: [[fc00:1::1]]:389 ([[fc00:1::3]]:389) (Weight set to 4) do not know if this is a bug or a configuration error, can anyone help? Regards.

    Read the article

  • How to mount remote samba share from local host with multiple groups?

    - by Dragos
    I am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this: mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000 $ cat .credentials username=user password=password I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has? Is there a way to: Mount the remote samba with multiple groups on the local system? Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs. Other solutions would be: nautilus sftp:// which runs through gvfs; but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. And the last solution would be NFS but that means that I have to synchronize the uids and gids on the local system with the ones from the server.

    Read the article

  • How to tell if linux disk IO is causing excessive (> 1 second) application stalls

    - by noahz
    I have a Java application performing a large volume (hundreds of MB) of continuous output (streaming plain text) to about a dozen files a ext3 SAN filesystem. Occasionally, this application pauses for several seconds at a time. I suspect that something related to ext3 vsfs (Veritas Filesystem) functionality (and/or how it interacts with the OS) is the culprit. What steps can I take to confirm or refute this theory? I am aware of iostat and /proc/diskstats as starting points. Revised title to de-emphasize journaling and emphasize "stalls" I have done some googling and found at least one article that seems to describe behavior like I am observing: Solving the ext3 latency problem Additional Information Red Hat Enterprise Linux Server release 5.3 (Tikanga) Kernel: 2.6.18-194.32.1.el5 Primary application disk is fiber-channel SAN: lspci | grep -i fibre 14:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter (rev 03) Mount info: type vxfs (rw,tmplog,largefiles,mincache=tmpcache,ioerror=mwdisable) 0 0 cat /sys/block/VxVM123456/queue/scheduler noop anticipatory [deadline] cfq

    Read the article

  • LInux (Ubuntu Karmic) equivalent to Pawsense

    - by LRE
    I now work from a home office - much to the delight of my cats. One in particular likes to come for a hug several times a day. That in itself is fine but he tends to sit on my laptop keyboard whilst I'm working on my desktop and vice-versa. Also he'll walk across any keyboard I'm actually using at the time. I've found Pawsense and would like to know if anyone can suggest a Linux equivalent (or some incantations to achieve the same). Training him out of sitting on the keyboard is likely to prove fruitless (a suggested here). He's far more pig-headed than I am. This conversation discusses some utilities like xlock et al but I'd prefer if possible to have something more along the lines of Pawsense that doesn't lock the keyboard but "simply" intercepts cat-like typing. Thanks

    Read the article

  • Escape a ! in the password parameter of wget

    - by Dave
    I'm trying to execute something like this: wget --user=foo --password=bar! url The ! in the password is causing problems. I've tried escaping it with \, as in --password=bar\! I've tried encapsulating in single and double quotes. I put the password in a separate file and tried --password=cat pass.txt Each time, I get a 403 Forbidden. Using -d, I see that the SSL handshake is successful. On the Windows command line, the command works. My assumption is that I need to escape the ! differently, but I don't know how else.

    Read the article

  • does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

    - by locuse
    i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

    Read the article

  • openssl creates invalid signature if run by a different user

    - by divB
    Very strange problem here: openssl successfully creates signatures but only those created as root are valid whereas created by another user (www-data) are invalid! All files are readable and there are not error messages: # echo -ne Test | openssl dgst -ecdsa-with-SHA1 -sign activation.key > /tmp/asRoot.der # su www-data $ echo -ne Test | openssl dgst -ecdsa-with-SHA1 -sign activation.key > /tmp/asWww-data.der $ uname -a Linux linux 2.6.32-5-openvz-amd64 #1 SMP Mon Feb 25 01:16:25 UTC 2013 i686 GNU/Linux $ cat /etc/debian_version 6.0.7 Both files (asRoot.der and asWww-data.der) are transfered to a different computer for verification with the public key: $ echo -ne Test | openssl dgst -verify activation.pub -keyform DER -signature asRoot.der Verified OK $ echo -ne Test | openssl dgst -verify activation.pub -keyform DER -signature asWww-data.der Verification Failure That can't be true! What's wrong here?

    Read the article

  • All invalid hosts gets resolved to "com.org"

    - by Vi
    vi@vi-server:~$ nslookup nonexistent.itransition.com Server: 8.8.8.8 Address: 8.8.8.8#53 ** server can't find nonexistent.itransition.com: NXDOMAIN vi@vi-server:~$ cat /etc/resolv.conf nameserver 8.8.8.8 It does not exist. The same result from dig nonexistent.itransition.com. vi@vi-server:~$ ping nonexistent.itransition.com PING nonexistent.itransition.com.org (216.234.246.153) 56(84) bytes of data. 64 bytes from 99.f6.ead8.static.theplanet.com (216.234.246.153): icmp_seq=1 ttl=46 time=128 ms 64 bytes from 99.f6.ead8.static.theplanet.com (216.234.246.153): icmp_seq=2 ttl=46 time=128 ms It catches all invalid hostnames? Why? How to prevent?

    Read the article

  • Running out of LowMem with Ubuntu PAE Kernel and 32GB of RAM

    - by magneticMonster
    I'm running a Java data import process on a 32-bit Ubuntu 10 PAE kernel machine. After running the process for a while, the oom-killer zaps my Java process. After some Googling and digging through docs, it looks like the system is running out of LowMem. I started the process for the third time and am watching free -lm show me Low: 464 386 77 with the free value (77MB) slowly decreasing. Why am I running out of lowmem and how do I increase it? Some details: $ cat /proc/sys/vm/lowmem_reserve_ratio 256 256 32 $ free -lm total used free shared buffers cached Mem: 32086 24611 7475 0 0 24012 Low: 464 407 57 High: 31621 24204 7417 -/+ buffers/cache: 598 31487 Swap: 2047 0 2047

    Read the article

  • mdadm - Recovering a 'split' RAID1 array

    - by Hamza
    I have two drives that used to be part of a single RAID1 volume but it appears that one of them went offline for some time, something I've noticed just now when I rebooted my system. I now seem to have two RAID volumes, as reported by: # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc[1] 2096116 blocks super 1.2 [2/1] [_U] md127 : active (auto-read-only) raid1 sdb[0] 2096116 blocks super 1.2 [2/1] [U_] unused devices: <none> Not exactly sure where to go from here. How can I merge and re-sync these volumes without data loss? Thanks.

    Read the article

  • Disable NSS LDAP IPv6 (AAAA) lookups

    - by pilcrow
    Question: How can I disable inet6 AAAA queries for my LDAP server during (LDAP-backed) NSS lookups on a CentOS (RHEL) 5 machine? Background: I've servers configured to consult ldap://ldap.internal for NSS passwd and group lookups. Every relevant NSS lookup, for example the getpwuid(3) implied by an ls -l which needs to translate UIDs to network user names, performs the following DNS dance before connecting to the ldap server: AAAA? ldap.internal -> (no records) AAAA? ldap.internal.internal -> NXDomain A? ldap.internal -> 192.168.3.89 I'd like to skip the first two queries completely. Configuration: [server]$ cat /etc/redhat-release CentOS release 5.4 (Final) [server]$ grep ^passwd /etc/nsswitch.conf passwd: files ldap [server]$ grep ^uri /etc/ldap.conf uri ldap://ldap.internal/ For what it's worth, IPv6 support is otherwise disabled on these systems: [server]$ grep off /etc/modprobe.conf alias ipv6 off alias net-pf-10 off [server]$ echo "$(ip a | grep -c inet6) IPv6-enabled interfaces" 0 IPv6-enabled interfaces

    Read the article

  • configuring cgi-bin using .htaccess

    - by Alexandru
    I'm trying to configure a directory as cgi-bin using .htaccess, but when I try to access the executables, the files are downloaded. I'm using apache2.2. What is the problem? My .htaccess looks like: # cat www/cgi-bin/.htaccess Options +ExecCGI AddHandler cgi-script cgi pl File permissions are # ls -1la www/cgi-bin/ total 60 drwxr-xr-x 2 root root 4096 iun 10 19:22 . drwxr-xr-x 5 root root 4096 iun 10 19:18 .. -rw-r--r-- 1 root root 46 iun 10 19:23 .htaccess -rwxr-xr-x 1 root root 15358 iun 10 19:23 paperload.cgi -rwxr-xr-x 1 root root 12728 iun 10 19:23 papers.cgi -rwxr-xr-x 1 root root 12593 iun 10 19:23 paperview.cgi

    Read the article

  • iis php internal server error

    - by user1633206
    I developed a website, using php/mysql running at IIS Server as CGI Server API. Suddenly it gives me error 500 after two weeks. It has lot of scripts but index.php home is working. But other script that has header redirection What's wrong with my scripts. livehttp addon of firefox says.. GET /allplans.php?lang=ar&cat=1 HTTP/1.1 Host: www.myhost.com... [edited] User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:14.0) Gecko/20100101 Firefox/14.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Cache-Control: max-age=0 HTTP/1.1 500 Internal Server Error Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Mon, 03 Sep 2012 08:09:13 GMT Content-Length: 1208 Connection: Keep-Alive

    Read the article

  • /proc/pid/environ missing variables

    - by Josh Arenberg
    google is giving no love on this one today, so I turn to the experts... I'm currently hacking together a script that relies on the /proc/pid/environ feature in Linux (RHEL 4) to check for a particular environment variable. Trouble is, it seems certain environment variables aren't showing up in there for some reason. Example: create some test vars: $ export T_1=testval TEST_1=testval T=testval TESTING_LONGEST=testval open a subshell: $bash $ cat /proc/self/environ|tr "\0" "\n"|grep testval TESTVARIABLE_LONGEST=testval T=testval hmm... where did T_1 and TEST_1 go?? what rules govern this strange universe? Thanks in advance, Josh

    Read the article

  • Monitor a log file on Linux and send each line to another program

    - by mlambie
    I run an apt-cacher-ng server on Ubuntu Linux which writes logs in the following format: 1299745593|O|149406|XXX.XXX.XXX.XXX|uburep/pool/main/t/tiff/libtiff4_3.9.2-2ubuntu0.4_amd64.deb 1299745593|O|10154976|XXX.XXX.XXX.XXX|uburep/pool/main/l/linux-firmware/linux-firmware_1.34.4_all.deb 1299748529|O|39368|XXX.XXX.XXX.XXX|uburep/pool/main/n/nagios-nrpe/nagios-nrpe-server_2.12-4ubuntu1_amd64.deb 1300155440|O|680100|XXX.XXX.XXX.XXX|uburep/pool/main/t/tzdata/tzdata_2011c-0ubuntu0.10.04_all.deb It shows the timestamp, direction (in or out), byte count, IP and filename. Every time a line is written to it, I'd like to also send that line to another program. I will have this program insert the line into a database so that I can crunch some statistics about how much bandwidth we're saving through operating a caching server. I do not want to cat the log file every X minutes (via cron) looking for new entries as it'd be somewhat computationally uneconomical. Instead I'd prefer to have a daemon monitor the log, and when a change is detected, each line is sent to my database-insertion script. Will swatch achieve this, or are there better options?

    Read the article

  • Caching DNS server (bind9.2) CPU usage is so so so high

    - by Gk.
    I have a caching-only dns server which get ~3k queries per second. Here is specs: Xeon dual-core 2,8GHz 4GB of RAM Centos 5x (kernel 2.6.18-164.15.1.el5PAE) bind 9.4.2 rndc status: recursive clients: 666/4900/5000 About 300 new queries (not in cache) per second. Bind always uses 100% on one core on single-thread config. After I recompiled it to multi-thread, it uses nearly 200% on two core :( No iowait, only sys and user. I searched around but didn't see any info about how bind use CPU. Why does it become bottleneck? One more thing, here is RAM usage: cat /proc/meminfo MemTotal: 4147876 kB MemFree: 1863972 kB Buffers: 143632 kB Cached: 372792 kB SwapCached: 0 kB Active: 1916804 kB Inactive: 276056 kB I've set max-cache-size to 0 to make sure bind can use as much RAM as it want, but it always stop at ~2GB. Since every second we got not cached queries so theoretically RAM must be exhausted but it wasn't. Do you have any idea? TIA, -Gk

    Read the article

  • Centos + CPanel results in php always running as fgci, instead of cli, as expected

    - by quamis
    I'm having problems with a server configured by someone else. It uses CPanel, and it has Apache+PHP. For some reason, when running php -v as a user, i get "cli" as handler # php -v | head -n 1 PHP 5.3.27 (cli) (built: Oct 15 2013 16:06:48) If a make a PHP script with echo shell_exec("php -v | tail -n 1"), i get PHP 5.3.27 (cgi-fcgi) (built: Oct 15 2013 16:22:16) Why the cli/fcgi difference? I need to fix this so that scripts ran by the apache user would be running as "cli", not "fcgi". As a side-note, i'm not sure how php got installed, because in the package list i see another version installed, instead of the pne reported by php -v # rpm -qa | grep php [.... other packages...] cpanel-php53-5.3.17-5.cp1136.x86_64 rebuild_phpconf --current: /usr/local/cpanel/bin/rebuild_phpconf --current Available handlers: suphp dso fcgi cgi none DEFAULT PHP: 5 PHP4 SAPI: none PHP5 SAPI: dso SUEXEC: enabled RUID2: not installed redhat-release: # cat /etc/redhat-release CentOS release 6.4 (Final) possibly related to http://superuser.com/questions/665809/centos-6-4-running-php-for-root-as-cgi-fcgi-not-cli

    Read the article

  • How to suppress "Not collecting exported resources without storeconfigs"?

    - by Andy Shinn
    I'm getting the following in my Puppet master syslog over and over: Sep 27 11:52:05 puppet1 puppet-master: Not collecting exported resources without storeconfigs Sep 27 11:52:06 puppet1 puppet-master: Not collecting exported resources without storeconfigs Sep 27 11:52:06 puppet1 puppet-master: Not collecting exported resources without storeconfigs I'm not actually using storeconfigs: [ashinn@puppet1 ~]$ cat /etc/puppet/puppet.conf [agent] server = puppet.mydomain.com environment = production report = true [main] logdir = /var/log/puppet vardir = /var/lib/puppet ssldir = /var/lib/puppet/ssl rundir = /var/run/puppet factpath = $vardir/lib/facter pluginsync = true certname = puppet1.mydomain.com [master] modulepath = $confdir/environments/$environment/modules manifest = $confdir/environments/$environment/manifests/site.pp templatedir = $confdir/templates autosign = $confdir/autosign.conf ssl_client_header = SSL_CLIENT_S_DN ssl_client_verify_header = SSL_CLIENT_VERIFY report = true reports = hipchat Any way I can suppress these messages? What do they actually come from?

    Read the article

  • yum install gcc fails with invalid linux.dropbox.com/fedora directory

    - by john
    I am relatively new to Linux administration. I have installed Centos 6.5 (under VirtualBox on a Win7pro system). When I try to install gcc to the system using yum, I get the following results: [root@localhost etc]# yum clean all Loaded plugins: fastestmirror, refresh-packagekit, security Cleaning repos: Dropbox base extras updates Cleaning up Everything Cleaning up list of fastest mirrors [root@localhost etc]# yum install gcc Loaded plugins: fastestmirror, refresh-packagekit, security Determining fastest mirrors * base: mirrors.tummy.com * extras: mirrors.cat.pdx.edu * updates: centos.mirror.freedomvoice.com http://linux.dropbox.com/fedora/6/repodata/repomd.xml: [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 404 Not Found" Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: Dropbox. Please verify its path and try again It appears that the linux.dropbox.com/fedora/6 subdirectory does not exist. Does anyone have any ints/answers for me. Thanks.

    Read the article

  • Retrieve malicious IP addresses from Apache logs and block them with iptables

    - by Gabriel Talavera
    Im trying to keep away some attackers that try to exploit XSS vulnerabilities from my website, I have found that most of the malicious attempts start with a classic "alert(document.cookie);\" test. The site is not vulnerable to XSS but I want to block the offending IP addresses before they found a real vulnerability, also, to keep the logs clean. My first thought is to have a script constantly checking in the Apache logs all IP addresses that start with that probe and send those addresses to an iptables drop rule. With something like this: cat /var/log/httpd/-access_log | grep "alert(document.cookie);" | awk '{print $1}' | uniq Why would be an effective way to send the output of that command to iptables? Thanks in advance for any input!

    Read the article

  • Syntax for piping varnish logs to rotatelogs

    - by jetboy
    Ubuntu 12.04 Server x64, Varnish 3.0.2 I'm trying to pipe varnishncsa's logs through Apache's rotatelogs, and running from the shell, things work fine: sudo varnishncsa -a -P /var/run/varnishncsa/varnishncsa.pid |/usr/sbin/rotatelogs /var/log/varnish/varnish.log.%Y%m%d%H 3600 creates a new logfile in /var/log/varnish, with rotation every hour (3600 seconds). However, I'm struggling to get things working the same way inside /etc/init.d/varnishncsa: PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/bin/$NAME PIDFILE=/var/run/$NAME/$NAME.pid LOGFILE=/var/log/varnish/varnishncsa.log USER=varnishlog DAEMON_OPTS="-a -P ${PIDFILE}" DAEMON_PIPE="|/usr/sbin/rotatelogs /var/log/varnish/varnish.log.%Y%m%d%H 3600" ... start_varnishncsa() { output=$(/bin/tempfile -s.varnish) log_daemon_msg "Starting $DESC" "$NAME" create_pid_directory if start-stop-daemon --start --verbose --pidfile ${PIDFILE} \ --chuid $USER --exec ${DAEMON} -- ${DAEMON_OPTS} \ > ${output} 2>&1; then log_end_msg 0 else log_end_msg 1 cat $output exit 1 fi rm $output } Where should I put DAEMON_PIPE in the above code? I've tried at the end of: if start-stop-daemon --start --verbose --pidfile ${PIDFILE} which is where additional command line parameters usually go, but it isn't creating a logfile.

    Read the article

  • Write to stdin of a running process using pipe

    - by aditya
    I am in a similar situation as in this post But I couln't get the solution provided there to work in my situation as the answer seems related to that question only. In particular, I couldnt understand what was the purpose of cat my.fifo | nc remotehost.tld 10000 In my case, I have a process running and waiting for input. how can I send input to that process using named pipes? I've tried echo 'h' > /proc/PID/fd/0 it just displays 'h' on the process' window.

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >