Search Results

Search found 10106 results on 405 pages for 'fail fast'.

Page 51/405 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • Oracle OpenWorld 2013 – Wrap up by Sven Bernhardt

    - by JuergenKress
    OOW 2013 is over and we’re heading home, so it is time to lean back and reflecting about the impressions we have from the conference. First of all: OOW was great! It was a pleasure to be a part of it. As already mentioned in our last blog article: It was the biggest OOW ever. Parallel to the conference the America’s Cup took place in San Francisco and the Oracle Team America won. Amazing job by the team and again congratulations from our side Back to the conference. The main topics for us are: Oracle SOA / BPM Suite 12c Adaptive Case management (ACM) Big Data Fast Data Cloud Mobile Below we will go a little more into detail, what are the key takeaways regarding the mentioned points: Oracle SOA / BPM Suite 12c During the five days at OOW, first details of the upcoming major release of Oracle SOA Suite 12c and Oracle BPM Suite 12c have been introduced. Some new key features are: Managed File Transfer (MFT) for transferring big files from a source to a target location Enhanced REST support by introducing a new REST binding Introduction of a generic cloud adapter, which can be used to connect to different cloud providers, like Salesforce Enhanced analytics with BAM, which has been totally reengineered (BAM Console now also runs in Firefox!) Introduction of templates (OSB pipelines, component templates, BPEL activities templates) EM as a single monitoring console OSB design-time integration into JDeveloper (Really great!) Enterprise modeling capabilities in BPM Composer These are only a few points from what is coming with 12c. We are really looking forward for the new realese to come out, because this seems to be really great stuff. The suite becomes more and more integrated. From 10g to 11g it was an evolution in terms of developing SOA-based applications. With 12c, Oracle continues it’s way – very impressive. Adaptive Case Management Another fantastic topic was Adaptive Case Management (ACM). The Oracle PMs did a great job especially at the demo grounds in showing the upcoming Case Management UI (will be available in 11g with the next BPM Suite MLR Patch), the roadmap and the differences between traditional business process modeling. They have been very busy during the conference because a lot of partners and customers have been interested Big Data Big Data is one of the current hype themes. Because of huge data amounts from different internal or external sources, the handling of these data becomes more and more challenging. Companies have a need for analyzing the data to optimize their business. The challenge is here: the amount of data is growing daily! To store and analyze the data efficiently, it is necessary to have a scalable and flexible infrastructure. Here it is important that hardware and software are engineered to work together. Therefore several new features of the Oracle Database 12c, like the new in-memory option, have been presented by Larry Ellison himself. From a hardware side new server machines like Fujitsu M10 or new processors, such as Oracle’s new M6-32 have been announced. The performance improvements, when using one of these hardware components in connection with the improved software solutions were really impressive. For more details about this, please take look at our previous blog post. Regarding Big Data, Oracle also introduced their Big Data architecture, which consists of: Oracle Big Data Appliance that is preconfigured with Hadoop Oracle Exdata which stores a huge amount of data efficently, to achieve optimal query performance Oracle Exalytics as a fast and scalable Business analytics system Analysis of the stored data can be performed using SQL, by streaming the data directly from Hadoop to an Oracle Database 12c. Alternatively the analysis can be directly implemented in Hadoop using “R”. In addition Oracle BI Tools can be used to analyze the data. Fast Data Fast Data is a complementary approach to Big Data. A huge amount of mostly unstructured data comes in via different channels with a high frequency. The analysis of these data streams is also important for companies, because the incoming data has to be analyzed regarding business-relevant patterns in real-time. Therefore these patterns must be identified efficiently and performant. To do so, in-memory grid solutions in combination with Oracle Coherence and Oracle Event Processing demonstrated very impressive how efficient real-time data processing can be. One example for Fast Data solutions that was shown during the OOW was the analysis of twitter streams regarding customer satisfaction. The feeds with negative words like “bad” or “worse” have been filtered and after a defined treshold has been reached in a certain timeframe, a business event was triggered. Cloud Another key trend in the IT market is of course Cloud Computing and what it means for companies and their businesses. Oracle announced their Cloud strategy and vision – companies can focus on their real business while all of the applications are available via Cloud. This also includes Oracle Database or Oracle Weblogic, so that companies can also build, deploy and run their own applications within the cloud. Three different approaches have been introduced: Infrastructure as a Service (IaaS) Platform as a Service (PaaS) Software as a Service (SaaS) Using the IaaS approach only the infrastructure components will be managed in the Cloud. Customers will be very flexible regarding memory, storage or number of CPUs because those parameters can be adjusted elastically. The PaaS approach means that besides the infrastructure also the platforms (such as databases or application servers) necessary for running applications will be provided within the Cloud. Here customers can also decide, if installation and management of these infrastructure components should be done by Oracle. The SaaS approach describes the most complete one, hence all applications a company uses are managed in the Cloud. Oracle is planning to provide all of their applications, like ERP systems or HR applications, as Cloud services. In conclusion this seems to be a very forward-thinking strategy, which opens up new possibilities for customers to manage their infrastructure and applications in a flexible, scalable and future-oriented manner. As you can see, our OOW days have been very very interresting. We collected many helpful informations for our projects. The new innovations presented at the confernce are great and being part of this was even greater! We are looking forward to next years’ conference! Links: http://www.oracle.com/openworld/index.html http://thecattlecrew.wordpress.com/2013/09/23/first-impressions-from-oracle-open-world-2013 SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: cattleCrew,Sven Bernhard,OOW2013,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Help modify a javascript code to perform a div scroll

    - by Jamex
    Hi, The code below uses javascript to smoothly scroll content in a div. I don't need the smooth scrolling action, and only need the onclick action for the buttons. I would like to use this code so that if a scroll up/down button is pressed, the scroll would instantaneously jump up/down to a position, just like if you were to press the reset button (see demo link). If the down button is pressed, it would jump down the position of the content div (say 300px) and show the text instantaneously without showing how the scrolling text. I am not familiar with JS, so it you know a shorter way, please suggest. TIA the demo link is HERE The code is > this.easyscroll = function(){ // id of the container element var > id = "myContent"; // navigation > buttons text var nav = ["Scroll Up", > "Scroll Down", "Reset"]; // id for > each navigation button (OPTIONAL) var > navId = ["btnUp", "btnDown", > "btnReset"]; > > // movement speed var speed = 5; > // desired height of the container > element (in pixels) var height = 200; > // // END CONFIG // do not edit > below this line (unless you want to of > course :) ) // > > var obj = > document.getElementById(id); obj.up > = false; obj.down = false; obj.fast = false; > > var container = > document.createElement("div"); var > parent = obj.parentNode; > container.id="easyscroll"; > parent.insertBefore(container,obj); > parent.removeChild(obj); > container.style.position = > "relative"; container.style.height = > height + "px"; > container.style.overflow = "hidden"; > obj.style.position = "absolute"; > obj.style.top = "0"; obj.style.left > = "0"; container.appendChild(obj); var btns = new Array(); var ul = > document.createElement("ul"); > ul.id="easyscrollnav"; for (var > i=0;i<nav.length;i++){ var li = > document.createElement("li"); > li.innerHTML = nav[i]; li.id = > navId[i]; btns.push(li); > ul.appendChild(li); }; > parent.insertBefore(ul,container); > btns[0].onmouseover = function(){ > obj.up = true; this.className = > "over"; }; btns[0].onmouseout = > function(){ obj.up = false; > this.className = ""; }; > btns[1].onmouseover = function(){ > obj.down = true; this.className = > "over"; }; btns[1].onmouseout = > function(){ obj.down = false; > this.className = ""; }; > btns[0].onmousedown = > btns[1].onmousedown = function(){ > obj.fast = true; }; > btns[0].onmouseup = btns[1].onmouseup > = function(){ obj.fast = false; }; btns[2].onmouseover = > function(){ this.className = > "over"; }; btns[2].onmouseout = > function(){ this.className = ""; > }; btns[2].onclick = function(){ > obj.style.top = "0px"; }; > this.start = function(){ var newTop; var objHeight = > obj.offsetHeight; var top = > obj.offsetTop; var fast = (obj.fast) > ? 2 : 1; if(obj.down){ newTop > = ((objHeight+top) > height) ? top-(speed*fast) : top; > obj.style.top = newTop + "px"; > }; if(obj.up){ newTop = > (top < 0) ? top+(speed*fast) : top; > obj.style.top = newTop + "px"; }; > }; obj.interval = > setInterval("start()",50); }; > > > this.addEvent = function(obj,type,fn){ > if(obj.attachEvent){ > obj['e'+type+fn] = fn; > obj[type+fn] = > function(){obj['e'+type+fn](window.event > );} obj.attachEvent('on'+type, > obj[type+fn]); } else { > obj.addEventListener(type,fn,false); > }; }; > addEvent(window,"load",easyscroll);

    Read the article

  • Failing Sata HDD

    - by DaveCol
    I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • High quality / high speed dvd reader for Mac Pro

    - by deadprogrammer
    I have a high end Mac pro, but one thing in is that I'm unhappy with is a DVD drive. It's a Hitachi GH41N. Apple calls it a "superdrive", but it's anything but. The damn thing makes an amazing amount of noise, and isn't too fast either. What I want is a state of the art, fast, quiet DVD reader, preferably not even a burner. What should I get?

    Read the article

  • Recommend software: File checksum calculator

    - by Johnny W
    Hi, I'm looking for a light, fast hash/checksum calculator (eg. MD5, SHA1, etc.). I've been using HashCalc and it works fine enough, but I was wondering if there was something better. When downloading .ISOs from MS BizSpark, I've found that it's essential to check the SHA1, and I'm sure that other people have found the same... So what's the defacto, light, fast, simple app that does the job? :) Thanks for any recommendations.

    Read the article

  • light text editor for csv file? (on windows)

    - by Radek
    could anybody suggest a light (small, fast) text editor that can handle columnar view of csv files? save quote character to all fields, even if not 'necessary' OpenOffice Calc is bit big for my old laptop. My favourite Notepad++ cannot do the columnar view. And it seems to me that Sharp Tools Spreadsheet cannot import csv file. GoogleDoc convert some date fields by default which I do not want and it is really not fast and easy way how to edit csv.

    Read the article

  • EC2 instance suddenly refusing SSH connections and won't respond to ping

    - by Chris
    My instance was running fine and this morning I was able to access a Ruby on Rails app hosted on it. An hour later I suddenly wasn't able to access my site, my SSH connection attempts were refused and the server wasn't even responding to ping. I didn't change anything on my system during that hour and reboots aren't fixing it. I've never had any problems connecting or pinging the system before. Can someone please help? This is on my production system! OS: CentOS 5 AMI ID: ami-10b55379 Type: m1.small [] ~% ssh -v *****@meeteor.com OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to meeteor.com [184.73.235.191] port 22. debug1: connect to address 184.73.235.191 port 22: Connection refused ssh: connect to host meeteor.com port 22: Connection refused [] ~% ping meeteor.com PING meeteor.com (184.73.235.191): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 ^C --- meeteor.com ping statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss [] ~% ========= System Log ========= Restarting system. Linux version 2.6.16-xenU ([email protected]) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000006a400000 (usable) 980MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active IRQ lockup detection disabled Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2599.998 MHz processor. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f53fe000, maxmem 2d7fe000 Memory: 1718700k/1748992k available (1958k kernel code, 20948k reserved, 620k data, 144k init, 1003528k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5202.30 BogoMIPS (lpj=26011526) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Checking 'hlt' instruction... OK. Brought up 1 CPUs migration_cost=0 Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs xen_mem: Initialising balloon driver. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Xen virtual console successfully installed as tty1 Event-channel device installed. netfront: Initialising virtual ethernet driver. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 Registering block device major 8 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: init (pid=1) ** *************************************************************** *************************************************************** Pausing... 5Pausing... 4Pausing... 3Pausing... 2Pausing... 1Continuing... INIT: version 2.86 booting Welcome to CentOS release 5.4 (Final) Press 'I' to enter interactive startup. Setting clock : Fri Oct 1 14:35:26 EDT 2010 [ OK ] Starting udev: [ OK ] Setting hostname localhost.localdomain: [ OK ] No devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 275424/1310720 files, 1161123/2621440 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 4 Entering non-interactive startup Starting background readahead: [ OK ] Applying ip6tables firewall rules: modprobe: FATAL: Module ip6_tables not found. ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable 'filter' Error occurred at line: 3 Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information. [FAILED] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_ns [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Starting auditd: [FAILED] Starting irqbalance: [ OK ] Starting portmap: [ OK ] FATAL: Module lockd not found. Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ] [ OK ] Can't open RFCOMM control socket: Address family not supported by protocol Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: Can't open HIDP control socket: Address family not supported by protocol [FAILED] Starting autofs: Starting automount: automount: test mount forbidden or incorrect kernel protocol version, kernel protocol version 5.00 or above required. [FAILED] [FAILED] Starting sshd: [ OK ] Starting cups: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: no console device found[FAILED] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 390 100 390 0 0 58130 0 --:--:-- --:--:-- --:--:-- 58130 100 390 100 390 0 0 56984 0 --:--:-- --:--:-- --:--:-- 0 Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting OSSEC: [ OK ] Starting smartd: [ OK ] c CentOS release 5.4 (Final) Kernel 2.6.16-xenU on an i686 domU-12-31-39-00-C4-97 login: INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes

    Read the article

  • Windows 2008 R2 Task Scheduler Failure

    - by Jonathan Parker
    I have an application (.exe) which I am running via a scheduled task on Windows Server 2008 R2. The task runs fine but when the .exe returns a non-zero exit code the task is still successful when it should fail. I get this message: Task Scheduler successfully completed task "\CustomerDataSourceETL - Whics" , instance "{a574f6b4-2614-413c-8661-bc35eaeba7cd}" , action "E:\applications\CCDB-ETL\CustomerDataSourceETLConsole.exe" with return code 214794259. How can I get task scheduler to detect that the return code is 0 and fail the task?

    Read the article

  • Windows 2008 R2 Task Scheduler Failure

    - by Jonathan Parker
    I have an application (.exe) which I am running via a scheduled task on Windows Server 2008 R2. The task runs fine but when the .exe returns a non-zero exit code the task is still successful when it should fail. I get this message: Task Scheduler successfully completed task "\CustomerDataSourceETL - Whics" , instance "{a574f6b4-2614-413c-8661-bc35eaeba7cd}" , action "E:\applications\CCDB-ETL\CustomerDataSourceETLConsole.exe" with return code 214794259. How can I get task scheduler to detect that the return code is 0 and fail the task?

    Read the article

  • Sony Vegas: minimal audio glitches

    - by Fuxi
    When doing video-editing with Sony Vegas, I noticed that it kind of produces minimal audio glitches very often. With glitch, I mean a copied fragment of approximately 1/2 second, as if I copied it and directly pasted it again. I'm assuming it must be something with puffers. Does anyone know of this problem? I have a pretty fast Windows 7 system with fast SATA drives.

    Read the article

  • UPS vs Solar Power in case of power failure for a server [on hold]

    - by Zen 8000k
    I am looking for a low power, low end pc able to run 24/7 without overheating and a way to support it in case of power failure. Power failures can be up to 72 hours. The pc dosen't need a monitor or keyboard. A modem must also be protected in case of power failure. When i say low end, i don't mean crap. The cpu needs to be x86 and have at least 1k cpu in this chart: http://www.cpubenchmark.net/index.php What's the best way to do this? EDIT: more info. I need to run a home server. The server will perform light tasks mainly. A x86 cpu sadly is the only route for my use. I want to be able to run the server and the router/modem in case of power failure. Now, regarding how long the power will fail: 1) 1 hours is OK for most situations. (say 90%) 2) 3 hours is OK (say 98%) 3) 6 hours is more thank OK. (say 99.5%) 4) On extreme cases the power might fail days. I believe this is very unlikely to happen. More is great but, really, how ofter power will fail more than 3 hours? I believe once every year at best. Well, that's too rare to care about. Given the above, I am looking for a cost effective way to archive 1-3 hour power or 6 hour if possible. Solutions: You guys give me great ideas. 1) Power generator: no good as power will fail for 10 seconds before returning. Also I read online, "clean" power generators cost 1.5k+, so it's out of budged. Non clean generator might damage electronics, right? 2) Solar power: i don't know for sure about this. Sounds like a great idea, too good to be true, honestly. For only 200$ i get 100+w? What are the drawbacks here? 3) UPS: This seems to be the best. The only problem is the cost. Cost < 200$ = great 400$ = budged limit

    Read the article

  • Linux filesystem with inodes close on the disk

    - by pts
    I'd like to make the ls -laR /media/myfs on Linux as fast as possible. I'll have 1 million files on the filesystem, 2TB of total file size, and some directories containing as much as 10000 files. Which filesystem should I use and how should I configure it? As far as I understand, the reason why ls -laR is slow because it has to stat(2) each inode (i.e. 1 million stat(2)s), and since inodes are distributed randomly on the disk, each stat(2) needs one disk seek. Here are some solutions I had in mind, none of which I am satisfied with: Create the filesystem on an SSD, because the seek operations on SSDs are fast. This wouldn't work, because a 2TB SSD doesn't exist, or it's prohibitively expensive. Create a filesystem which spans on two block devices: an SSD and a disk; the disk contains file data, and the SSD contains all the metadata (including directory entries, inodes and POSIX extended attributes). Is there a filesystem which supports this? Would it survive a system crash (power outage)? Use find /media/myfs on ext2, ext3 or ext4, instead of ls -laR /media/myfs, because the former can the advantage of the d_type field (see in the getdents(2) man page), so it doesn't have to stat. Unfortunately, this doesn't meet my requirements, because I need all file sizes as well, which find /media/myfs doesn't print. Use a filesystem, such as VFAT, which stores inodes in the directory entries. I'd love this one, but VFAT is not reliable and flexible enough for me, and I don't know of any other filesystem which does that. Do you? Of course, storing inodes in the directory entries wouldn't work for files with a link count more than 1, but that's not a problem since I have only a few dozen such files in my use case. Adjust some settings in /proc or sysctl so that inodes are locked to system memory forever. This would not speed up the first ls -laR /media/myfs, but it would make all subsequent invocations amazingly fast. How can I do this? I don't like this idea, because it doesn't speed up the first invocation, which currently takes 30 minutes. Also I'd like to lock the POSIX extended attributes in memory as well. What do I have to do for that? Use a filesystem which has an online defragmentation tool, which can be instructed to relocate inodes to the the beginning of the block device. Once the relocation is done, I can run dd if=/dev/sdb of=/dev/null bs=1M count=256 to get the beginning of the block device fetched to the kernel in-memory cache without seeking, and then the stat(2) operations would be fast, because they read from the cache. Is there a way to lock those inodes and/or blocks into memory once they have been read? Which filesystem has such a defragmentation tool?

    Read the article

  • How do I convert ms/line to ppm

    - by user4941
    I'm looking at buying a scanner with a document feeder. The feeder can feed in 30 ppm, but the scanner can only can at 12 ms/line. So how fast is the scanner scanning? Is having such a fast document feeder useless?

    Read the article

  • How to fix SCRIPT_NAME with PHP-FPM and Apache's mod_fastcgi?

    - by Kyle MacFarlane
    I have the following in my Apache conf to get PHP-FPM working: FastCgiExternalServer /srv/www/fast-cgi-fake-handler -host 127.0.0.1:9000 AddHandler php-fastcgi .php AddType text/html .php Action php-fastcgi /var/www/cgi-bin Alias /var/www/cgi-bin /srv/www/fast-cgi-fake-handler DirectoryIndex index.php This works fine except that SCRIPT_NAME is always /var/www/cgi-bin and some scripts use SCRIPT_NAME to work out the location of the current script (vBulletin). Google has plenty of solutions for Nginx but not a word for Apache.

    Read the article

  • Is there a way to change the default animation speed in PowerPoint?

    - by Tim
    I do a lot of PowerPoint (2007) presentations, and some of those involve some rather complex diagrams that I like to build step by step, using PowerPoint's animation feature. I prefer using the "fade in" style, but I find the default medium speed setting too low, so every time I'm adding an element to my animation, I have to go to the Speed dropdown box and select "Very fast". This is getting annoying, so I wonder if there is a way to tell PowerPoint that I'd like my standard animation speed (at least for fade-ins) to be "very fast"?

    Read the article

  • Is data transfer response related to cable bandwidth limit?

    - by John Paku
    Hello, Before this, I'm using shared 100Mbps bandwidth. Its fast enough. And now, the server running dedicated 10Mbps bandwidth. When running 10Mbps, it takes more time to completely load the same page. The server bandwidth usage is small, with average less than 5Mbps. (I can see some website hosted at same data center loads very fast.)

    Read the article

  • Nested/Child TransactionScope Rollback

    - by Robert Wagner
    I am trying to nest TransactionScopes (.net 4.0) as you would nest Transactions in SQL Server, however it looks like they operate differently. I want my child transactions to be able to rollback if they fail, but allow the parent transaction to decide whether to commit/rollback the whole operation. A greatly simplified example of what I am trying to do: static void Main(string[] args) { using(var scope = new TransactionScope()) // Trn A { // Insert Data A DoWork(true); DoWork(false); // Rollback or Commit } } // This class is a few layers down static void DoWork(bool fail) { using(var scope = new TransactionScope()) // Trn B { // Update Data A if(!fail) { scope.Complete(); } } } I can't use the Suppress or RequiresNew options as Trn B relies on data inserted by Trn A. If I do use those options, Trn B is blocked by Trn A. Any ideas how I would get it to work, or if it is even possible using the System.Transactions namespace? Thanks

    Read the article

  • algorithm analysis - orders of growth question

    - by cchampion
    I'm studing orders of growth "big oh", "big omega", and "big theta". Since I can't type the little symbols for these I will denote them as follows: ORDER = big oh OMEGA = big omega THETA = big theta For example I'll say n = ORDER(n^2) to mean that the function n is in the order of n^2 (n grows at most as fast n^2). Ok for the most part I understand these: n = ORDER(n^2) //n grows at most as fast as n^2 n^2 = OMEGA(n) //n^2 grows atleast as fast as n 8n^2 + 1000 = THETA(n^2) //same order of growth Ok here comes the example that confuses me: what is n(n+1) vs n^2 I realize that n(n+1) = n^2 + n; I would say it has the same order of growth as n^2; therefore I would say n(n+1) = THETA(n^2) but my question is, would it also be correct to say: n(n+1) = ORDER(n^2) please help because this is confusing to me. thanks.

    Read the article

  • Bullet Physics, when to choose which DynamicsWorld?

    - by Sqeaky
    I have a few general questions about the bullet physics library. Here is my current understanding in a nutshell: btDiscreteDynamicsWorld - Simplest physics world, only handles rigid bodies, maybe it has better performance. btSoftRigidDynamicsWorld - The only physics world that can work with large jello moulds btContinuousDynamicsWorld - If you have really fast objects this will prevent them from prenetrating each other or flying through each other, but is otherwise like a btDiscreteDynamicsWorld. Is my understanding of the btDiscreetDynamicsWorld, btContinuousDynamicsWorld and btSoftRigidDynamicsWorld classes in terms of functionality, purpose, and performance correct? Why does the user manual recommend the btDiscreteDynamicsWorld class? btSoftRigidDynamicsWorld appears to be the only world that can handle soft bodies, so what if we wanted Continuous Physics integration and Soft bodies? How fast is fast enough to consider using a btContinuousDynamicsWorld, and what are the drawbacks of using one? Edit: My Buddy Mako also posted this question on The Bullet forums: http://www.bulletphysics.org/Bullet/phpBB3/viewtopic.php?f=9&t=4863

    Read the article

  • Activity tracking usecase for login tracking.

    - by Mdillion
    Creating an activity tracking system for a social site. All user activiti from pooint of login til logoff are to be tracked. This means the first use case is the user's login. Every activity will have the same format so once I figure out how to track one activity then I can create chema for all activities. Currently for login I have steps like: Two solutions I have: Activity 1: User attempts to login Activity 2 A: User has successfully logged in Activity 2 B: User failed to login. Activity 2 B A: User failed to login due to invalid password Activity 2 B B: User failed to login due to locked account. OR Activty 1: User login - with result = Pass or Fail and if Fail reason = flag_id of reason. Accordingly I have to create the schema. For now I have it like this: activity_id object_id (fk) session_id (fk) user_id (fk) flag_id (fk) created_dt friend_id (fk) result (pass/fail) But ofcourse this a work in progress.

    Read the article

  • how to delete duplicates in mysql using case

    - by JPro
    Right now I am using something like this to delete duplicates in mysql table : delete t2 from my_table1 as t1, my_table1 as t2 where t1.TestCase = t2.TestCase and t2.id > t1.id; say I have a structure like this : ID TestCAse Result 1 T1 PASS 2 T2 FAIL 3 T3 FAIL 4 T3 PASS now, in the above case T3 is duplicate entry, and if I use the SQL that I mentioned above, it would delete 4th row where the result is PASS, but this is the row that I want to keep and I want row 3 to get deleted which is FAIL. Any help please? Thank you.

    Read the article

  • Spring security accessing principal

    - by wuntee
    When using spring security, specifically with @notation; what is the proper way to access the principal in a Controller? Lets say the following is my controller, but I would like to access the principal in the secure() method somewhere... @Controller public class LoginController { @RequestMapping(value = "/login", method = RequestMethod.GET) public String login(ModelMap map, @RequestParam(value="fail" , required=false) String fail){ map.addAttribute("title", "Login: AD Credentials"); if(fail != null){ map.addAttribute("error", "Invalid credentials"); } return("login"); } @RequestMapping("/secure") @PreAuthorize("isAuthenticated()") public String secure(ModelMap map, String principal){ System.out.println(principal); return("secure"); } }

    Read the article

  • How to add animation on open of a Jquery SimpleModal?

    - by Obay
    The animation-enabled example in the SimpleModal site has this animation: 1. Fade in the overlay 2. Slide down the modal div This is the code: $("#the-div").modal({ onOpen: function (dialog) { dialog.overlay.fadeIn('fast', function () { dialog.data.hide(); dialog.container.show('fast', function () { dialog.data.slideDown('fast'); }); }); }}); I want this animation instead: 1. Just display the modal 2. Fade in the overlay Alas, simply removing the 2nd parameter of dialog.overlay.fadeIn() from the code above doesn't work. I also tried removing the parameters of dialog.container.show(), also changing it to dialog.container.open(). I've tried other combinations of the code, to no avail. How do I achieve the animation that I wish?

    Read the article

  • How can I specifiy JUnit test dependencies?

    - by Egon Willighagen
    Our toolkit has over 15000 JUnit tests, and many tests are known to fail if some other test fails. For example, if the method X.foo() uses functionality from Y.foo() and YTest.testFoo() fails, then XTest.testFoo() will fail too. Obviously, XTest.testFoo() can also fail because of problems specific to X.foo(). While this is fine and I still want both tests run, it would be nice if one could annotate a test dependency with XTest.testFoo() pointing to YTest.testFoo(). This way, one could immediately see what functionality used by X.foo() is also failing, and what not. Is there such annotation available in JUnit or elsewhere? Something like: public YTests { @Test @DependsOn(method=org.example.tests.YTest#testFoo) public void testFoo() { // Assert.something(); } }

    Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >