Search Results

Search found 10106 results on 405 pages for 'fail fast'.

Page 49/405 | < Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >

• "Windows detected a hard drive" issue in Windows 7 x64

  - by Jasiu

  I upgraded to the OCZ-Agility3 120GB from a 60 OCZ Vertex2 SSD. I cloned the drive from the Vertex to the new Agility. Everything seemed to have gone well and have not had any problems. Recently in the passed month I have gotten this error: I downloaded teh OCZToolboxMP and ran the SMART utility and don't see anything wrong: SMART READ DATA ModelNumber : OCZ-AGILITY3 Serial Number : OCZ-Y1945X77438P4NU6 WWN : 5-e8-3a-97 ebea5ba76 Revision: 10 Attributes List 1: SSD Raw Read Error Rate Normalized Rate: 70 total ECC and RAISE errors 5: SSD Retired Block Count Reserve blocks remaining: 100% 9: SSD Power-On Hours Total hours power on: 968 12: SSD Power Cycle Count Count of power on/off cycles: 28 171: SSD Program Fail Count Total number of Flash program operation failures: 0 172: SSD Erase Fail Count Total number of Flash erase operation failures: 0 174: SSD Unexpected power loss count Total number of unexpected power loss: 11 177: SSD Wear Range Delta Delta between most-worn and least-worn Flash blocks: 0 181: SSD Program Fail Count Total number of Flash program operation failures: 0 182: SSD Erase Fail Count Total number of Flash erase operation failures: 0 187: SSD Reported Uncorrectable Errors Uncorrectable RAISE errors reported to the host for all data access: 4145 194: SSD Temperature Monitoring Current: 30 High: 30 Low: 30 195: SSD ECC On-the-fly Count Normalized Rate: 120 196: SSD Reallocation Event Count Total number of reallocated Flash blocks: 100 201: SSD Uncorrectable Soft Read Error Rate Normalized Rate: 120 204: SSD Soft ECC Correction Rate (RAISE) Normalized Rate: 120 230: SSD Life Curve Status Current state of drive operation based upon the Life Curve: 100 231: SSD Life Left Approximate SDD life Remaining: 100% 241: SSD Lifetime writes from host lifetime writes 893 GB 242: SSD Lifetime reads from host lifetime reads 968 GB Does anyone have any ideas of what might be wrong and or how I can go about fixing this? Please let me know if there is other information I can provide. Thanks for your help Windows 7 x64 SP1 AMD Phenom II X4 940 8GB RAM

  Read the article

• How powerful of a PC do you need to edit HD videos?

  - by Xeoncross

  I have a Core2Quad Q8200 (2.3GHz) with 4GB of RAM, a 512MB PCIe video card, and a SATA-2 HD. Yet it still isn't fast enough to edit 720i/p video in Sony Vegas or Adobe Premiere/Aftereffects. My RAM usage never peaks over 1.6GB, but my CPU cores make it to 95% quick! Right now the preview panes in all these programs lag to bad to actually work on the videos. I get to see 1-3 frames every second or two! So how fast do I have to go? At what point will my CPU be fast enough to actually edit these videos? I have to assume that regular people and their regular sub $2k computers can actually work with this footage. Another way to answer this is, how fast is the PC you used to edit videos? Update: I'ts worth noting that now that I have Adobe Pre/AF CS4 I am more interested in getting that working than my older Vegas 6. If you didn't have to re-run RAM preview every, single, time you made one change it would be my answer. But since I like to test many filters and effects before choosing one - I have to re-render a 1-sec section of footage over-and-over and it drives me nuts waiting. Perhaps a motherboard with Dual Xeon chips or something would be able to handle this. It would probably be as much as a dual-crossfire setup and would also speed up other applications.

  Read the article

• iSCSI, failover and XenServer

  - by jemmille

  I have an iSCSI fail over implementation setup so if one of my storage units fails the other takes over immediately (it also runs the NFS shares). When fail over occurs, volumes are exported, the IP is switched to the other machine and the targets are reconfigured. The fail over of the storage system itself works just fine. I use NexentaStor for my filer. When I do a test (manual) fail over of my storage the following occurs: Note: I run the admin VM's on NFS and customer based VM's on iSCSI All NFS based VM's remain up and working perfectly through the failover and after All VM 's running on iSCSI eventually report the following: An error about not being able to write to a particular block An error about journaling not working Then the file system goes RO To get the VM's working again I have to do the following: Force shutdown of the "broken" VM's. Detach the iSCSI SR Re-attach the iSCSI SR Boot the VM on a different server (5 in my pool) If I don't boot on a different server I get this error "Internal error: Failure("The VDI <uuid&gt; is already attached in RW mode; it can't be attached in RO mode!")" The only way I have found to fix that error is to reboot the entire server it was running on previously which is obviously a huge pain. Currently multipathing is NOT enabled (but can be and the same thing still occurs). I have edited much of the /etc/iscsid.conf file to work with the timeout settings but to no avail. In short, my storage fails over properly but XenServer does not keep the connection alive. As a thought, the error that shows up in #4 above might be the ultimate cause and fixing that would fix everything? Any help would be appreciated more than you know.

  Read the article

• Ensuring a repeatable directory ordering in linux

  - by Paul Biggar

  I run a hosted continuous integration company, and we run our customers' code on Linux. Each time we run the code, we run it in a separate virtual machine. A frequent problem that arises is that a customer's tests will sometimes fail because of the directory ordering of their code checked out on the VM. Let me go into more detail. On OSX, the HFS+ file system ensures that directories are always traversed in the same order. Programmers who use OSX assume that if it works on their machine, it must work everywhere. But it often doesn't work on Linux, because linux file systems do not offer ordering guarantees when traversing directories. As an example, consider there are 2 files, a.rb, b.rb. a.rb defines MyObject, and b.rb uses MyObject. If a.rb is loaded first, everything will work. If b.rb is loaded first, it will try to access an undefined variable MyObject, and fail. But worse than this, is that it doesn't always just fail. Because the file system ordering on Linux is not ordered, it will be a different order on different machines. This is worse because sometimes the tests pass, and sometimes they fail. This is the worst possible result. So my question is, is there a way to make file system ordering repeatable. Some flag to ext4 perhaps, that says it will always traverse directories in some order? Or maybe a different file system that has this guarantee?

  Read the article

• Sun T5120: Memory issue with 8GB DIMMs, "Unsupported memory configuration"

  - by watain

  I'm trying to upgrade RAM in a Sun T5120 server, replacing 2GB (Sun P/N: 501-7953-01) with 8GB DIMMs (Sun P/N: 511-1262-01). When bringing up the host system, I get the following errors on the ILOM: -> show faulty Target | Property | Value --------------------+------------------------+--------------------------------- /SP/faultmgmt/0 | fru | /SYS/MB /SP/faultmgmt/0/ | timestamp | Dec 14 15:29:42 faults/0 | | /SP/faultmgmt/0/ | sp_detected_fault | /SYS/MB/CMP0/MCU3 Forced fail faults/0 | | (IBIST) /SP/faultmgmt/0/ | timestamp | Dec 14 15:29:28 faults/1 | | /SP/faultmgmt/0/ | sp_detected_fault | /SYS/MB/CMP0/MCU2 Forced fail faults/1 | | (IBIST) /SP/faultmgmt/0/ | timestamp | Dec 14 15:29:13 faults/2 | | /SP/faultmgmt/0/ | sp_detected_fault | /SYS/MB/CMP0/MCU1 Forced fail faults/2 | | (IBIST) /SP/faultmgmt/0/ | timestamp | Dec 14 15:28:59 faults/3 | | /SP/faultmgmt/0/ | sp_detected_fault | /SYS/MB/CMP0/MCU0 Forced fail faults/3 | | (IBIST) /SP/faultmgmt/1 | fru | /SYS /SP/faultmgmt/1/ | timestamp | Dec 14 15:29:42 faults/0 | | /SP/faultmgmt/1/ | sp_detected_fault | Dec 14 15:29:42 ERROR: faults/0 | | Unsupported memory | | configuration As you can see, the only error message I get is "Unsupported memory configuration". Note that I'm absolutely sure that I placed in the DIMMs in the correct slots. Might this issue be related to the Voltage of the DIMMs? Any suggestions on how to trouble-shoot this issue? This issue seems to be similar to the one explained at "Inserted disabled" while upgrading Sun Sparc t5120 memory. However the given link http://docs.sun.com/source/820-4445-10/chapter1.html seems to point to an inexistent page...

  Read the article

• Permission / owner issue with pushing to git when editing directly from repo?

  - by Susan

  I have a web interface for deploying scripts from our repo at Github to our live server. The web interface just triggers a bash script with some git commands. If I make changes locally, push to repo, then run the bash script to pull from repo to live it works fine. However, if I make changes directly in the repo (via Github's web interface), I'm running into fast-forward / lock issues. These are the steps I'm taking: Make a change on a file at Github repo Run a bash script (as apache) via web from live server that attempts a git push / pull. Get these problems: PUSH To [email protected]:name/name.git ! [rejected] master - master (non-fast-forward) error: failed to push some refs to '[email protected]:name/name.git' To prevent you from losing history, non-fast-forward updates were rejected Merge the remote changes before pushing again. See the 'Note about fast-forwards' section of 'git push --help' for details. PULL From github.com:name/name branch master - FETCH_HEAD error: unable to unlink old 'includes/footer.inc' (Permission denied) Updating 8f6d922..d1eba9d Updating 8f6d922..d1eba9d SSH in as root, attempt a push / pull and it works fine. Ideas on why would this method not work from apache?

  Read the article

• Why Look and feel is not getting updated properly?

  - by swift

  I’m developing a swing application in which I have an option to change the Look and feel of the application on click of a button. Now my problem is when I click the button to change the theme it’s not properly updating the L&F of my app, say my previous theme is “noire” and I choose “MCWin” after it, but the style of the noire theme is still there Here is sample working code: package whiteboard; import java.awt.GridBagLayout; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.ComponentEvent; import java.awt.event.ComponentListener; import javax.swing.JFrame; import javax.swing.JLayeredPane; import javax.swing.JMenu; import javax.swing.JMenuBar; import javax.swing.JMenuItem; import javax.swing.SwingUtilities; import javax.swing.UIManager; import javax.swing.WindowConstants; public class DiscussionBoard extends JFrame implements ComponentListener,ActionListener { // Variables declaration private JMenuItem audioMenuItem; private JMenuItem boardMenuItem; private JMenuItem exitMenuItem; private JMenuItem clientsMenuItem; private JMenuItem acryl; private JMenuItem hifi; private JMenuItem aero; private JMenuItem aluminium; private JMenuItem bernstein; private JMenuItem fast; private JMenuItem graphite; private JMenuItem luna; private JMenuItem mcwin; private JMenuItem noire; private JMenuItem smart; private JMenuBar boardMenuBar; private JMenuItem messengerMenuItem; private JMenu openMenu; private JMenu saveMenu; private JMenu themesMenu; private JMenuItem saveMessengerMenuItem; private JMenuItem saveWhiteboardMenuItem; private JMenu userMenu; JLayeredPane layerpane; /** Creates new form discussionBoard * @param connection */ public DiscussionBoard() { initComponents(); setLocationRelativeTo(null); addComponentListener(this); } private void initComponents() { boardMenuBar = new JMenuBar(); openMenu = new JMenu(); themesMenu = new JMenu(); messengerMenuItem = new JMenuItem(); boardMenuItem = new JMenuItem(); audioMenuItem = new JMenuItem(); saveMenu = new JMenu(); saveMessengerMenuItem = new JMenuItem(); saveWhiteboardMenuItem = new JMenuItem(); userMenu = new JMenu(); clientsMenuItem = new JMenuItem(); exitMenuItem = new JMenuItem(); setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE); setLayout(new GridBagLayout()); setResizable(false); setTitle("Discussion Board"); openMenu.setText("Open"); saveMenu.setText("Save"); themesMenu.setText("Themes"); acryl = new JMenuItem("Acryl"); hifi = new JMenuItem("HiFi"); aero = new JMenuItem("Aero"); aluminium = new JMenuItem("Aluminium"); bernstein = new JMenuItem("Bernstein"); fast = new JMenuItem("Fast"); graphite = new JMenuItem("Graphite"); luna = new JMenuItem("Luna"); mcwin = new JMenuItem("MCwin"); noire = new JMenuItem("Noire"); smart = new JMenuItem("Smart"); hifi.addActionListener(this); acryl.addActionListener(this); aero.addActionListener(this); aluminium.addActionListener(this); bernstein.addActionListener(this); fast.addActionListener(this); graphite.addActionListener(this); luna.addActionListener(this); mcwin.addActionListener(this); noire.addActionListener(this); smart.addActionListener(this); messengerMenuItem.setText("Messenger"); openMenu.add(messengerMenuItem); openMenu.add(boardMenuItem); audioMenuItem.setText("Audio Messenger"); openMenu.add(audioMenuItem); exitMenuItem.setText("Exit"); exitMenuItem.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent evt) { exitMenuItemActionPerformed(evt); } }); openMenu.add(exitMenuItem); boardMenuBar.add(openMenu); saveMessengerMenuItem.setText("Messenger"); saveMenu.add(saveMessengerMenuItem); saveWhiteboardMenuItem.setText("Whiteboard"); saveMenu.add(saveWhiteboardMenuItem); boardMenuBar.add(saveMenu); userMenu.setText("Users"); clientsMenuItem.setText("Current Session"); userMenu.add(clientsMenuItem); themesMenu.add(acryl); themesMenu.add(hifi); themesMenu.add(aero); themesMenu.add(aluminium); themesMenu.add(bernstein); themesMenu.add(fast); themesMenu.add(graphite); themesMenu.add(luna); themesMenu.add(mcwin); themesMenu.add(noire); themesMenu.add(smart); boardMenuBar.add(userMenu); boardMenuBar.add(themesMenu); saveMessengerMenuItem.setEnabled(false); saveWhiteboardMenuItem.setEnabled(false); setJMenuBar(boardMenuBar); setSize(1024, 740); setVisible(true); } protected void exitMenuItemActionPerformed(ActionEvent evt) { System.exit(0); } @Override public void componentHidden(ComponentEvent arg0) { } @Override public void componentMoved(ComponentEvent e) { } @Override public void componentResized(ComponentEvent arg0) { } @Override public void componentShown(ComponentEvent arg0) { } @Override public void actionPerformed(ActionEvent e) { try { if(e.getSource()==hifi) { UIManager.setLookAndFeel("javax.swing.plaf.metal.MetalLookAndFeel"); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.hifi.HiFiLookAndFeel"); enableTheme(); hifi.setEnabled(false); } else if(e.getSource()==acryl) { UIManager.setLookAndFeel("javax.swing.plaf.metal.MetalLookAndFeel"); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.acryl.AcrylLookAndFeel"); enableTheme(); acryl.setEnabled(false); } else if(e.getSource()==aero) { UIManager.setLookAndFeel("javax.swing.plaf.metal.MetalLookAndFeel"); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.aero.AeroLookAndFeel"); enableTheme(); aero.setEnabled(false); } else if(e.getSource()==aluminium) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.aluminium.AluminiumLookAndFeel"); enableTheme(); aluminium.setEnabled(false); } else if(e.getSource()==bernstein) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.bernstein.BernsteinLookAndFeel"); enableTheme(); bernstein.setEnabled(false); } else if(e.getSource()==fast) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.fast.FastLookAndFeel"); enableTheme(); fast.setEnabled(false); } else if(e.getSource()==graphite) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.graphite.GraphiteLookAndFeel"); enableTheme(); graphite.setEnabled(false); } else if(e.getSource()==luna) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.luna.LunaLookAndFeel"); enableTheme(); luna.setEnabled(false); } else if(e.getSource()==mcwin) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.mcwin.McWinLookAndFeel"); enableTheme(); mcwin.setEnabled(false); } else if(e.getSource()==noire) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.noire.NoireLookAndFeel"); enableTheme(); noire.setEnabled(false); } else if(e.getSource()==smart) { UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName()); SwingUtilities.updateComponentTreeUI(getRootPane()); UIManager.setLookAndFeel("com.jtattoo.plaf.smart.SmartLookAndFeel"); enableTheme(); smart.setEnabled(false); } SwingUtilities.updateComponentTreeUI(getRootPane()); } catch (Exception ex) { ex.printStackTrace(); } } private void enableTheme() { acryl.setEnabled(true); hifi.setEnabled(true); aero.setEnabled(true); aluminium.setEnabled(true); bernstein.setEnabled(true); fast.setEnabled(true); graphite.setEnabled(true); luna.setEnabled(true); mcwin.setEnabled(true); noire.setEnabled(true); smart.setEnabled(true); } public static void main(String []ar) { try { UIManager.setLookAndFeel("com.jtattoo.plaf.acryl.AcrylLookAndFeel"); } catch (Exception e) { e.printStackTrace(); } new DiscussionBoard(); } } What’s the problem here? why its not getting updated? There is a demo application here which is exactly doing what i want but i cant get a clear idea of it.

  Read the article

• Are there alternatives to Sysinternals ADInsight?

  - by mmcglynn

  I had been using ADInsight from Sysinternals to trace Active Directory calls from my workstation, but the application has failed. Where previously the Active Directory events were traced and logged, now the window remains blank, whether the application is in capture mode or not. I have run as Administrator, rebooted, downloaded a new version; none of those actions has returned the program to a functional state. The Sysinternals forums don't offer much hope, since this tool is known to fail often. Is there tool that has similar functionality? Questions Does the tool fail when run from another workstation with your account? Yes Does it fail from your (and/or) another workstation using someone else's account? Yes Is there anything in the event log of your workstation? No

  Read the article

• Install IIS windows 7

  - by rad

  I have tried many way to install IIS in my Windows 7 Professionnel environment. And I have always an error. I tried with Web Plateform Api - "Fatal Error during installation" With Windows Features in configuration pannel - "An error has occurred. Not all of the features were successfully" With command line (http://forums.iis.net/t/1152513.aspx) - "Fatal Error during installation" in log file I have IIS.log : [04/10/2012 16:13:25] "C:\Windows\SysWOW64\inetsrv\aspnetca.exe" /install /basic 2.0.50727.0 [04/10/2012 16:13:25] < !!FAIL!! RegOpenKeyEx(HKLM\SYSTEM\CurrentControlSet\Services\ASP.NET_2.0.50727\Names) result=0x80070002 [04/10/2012 16:13:25] < !!FAIL!! SetAccessToPerfCountersKeys() result=0x80070002 [04/10/2012 16:13:25] < !!FAIL!! Installation failure, result=0x80070002 If I uninstall/reinstall IIS, I have some error but my site run correctly, and after windows restart, the install is rollbacked and I lose my installation. Any help ?

  Read the article

• Which CPU for SQL Server machine (Xeon, i5, i7, AMD Phenom)?

  - by Tony_Henrich

  I am going to build a full height server machine to be used for SQL Server 2008 64bit. I have $400 to spend for a CPU. Which CPU should I get among i5, i7, Xeon and Phenom in terms of performance. There are so many options and I am out of touch with the latest stuff. All I know I want something fast and works with DDR3 fast memory and works with some kind of fast system bus. I don't care about overclocking, 3D & gfx benchmarks. The machine is not used for games and gfx apps. Any recommendations?

  Read the article

• MD3200i Slow Performance and Queue Depth

  - by Caleb_S

  Read performance on our SAN is slow under certain workloads. When we compare this to some local storage, we find the local storage performing 2x as fast. The SAN performs well with a high Queue Depth, and poorly with a low queue depth. However, the local storage performs well with a low Queue Depth. I'd like to know the reason for this occurring and find out what the specific limiting factor is in this situation. MD3200i iSCSI SAN ($15,000) 6 x 600GB 15k SAS RAID5 6 x 2TB 7.2k NLS RAID5 XCOPY /j Benchmark: (Slow) 15k Array - 71MB/s (Queue Depth 1) 7.2k Array- 71MB/s (Queue Depth 1) Robycopy /MT:32 Benchmark: (Fast) 15k Array - 171MB/s (Queue Depth ~12) 7.2k Array- 128MB/s (Queue Depth ~12) , , Read Performance on a Local controller is fast under the workload the SAN is slow at. , HighPoint 2230 RAID Controller ($600) 4 x 1TB 7.2k SATA RAID5 XCOPY /j Benchmark: 7.2k Array - 145MB/s (Queue Depth 1) (appears to max out the SATA bus)

  Read the article

• how to stop a driver from running - it self protected and rootkit hidden

  - by Aristos

  I have this serous problem For the first time I can not stop a program from running. Something is on one laptop computer that is run as system legacy driver, and self protected and hidden on service as rootkit. Anything I try to remove fails. When a program or anti toolkit try to remove the hidden registry setting for make it stop I get this error : "a device attached to the system is not functioning" So any idea that can help me stop it from running, or even delete it on start up ? My one limitation is that the hard drive is on a laptop and I can not remove it and attact it to somewhere else. This program not let me, touch the registry, do not let me touch the file, do not let me touch the file, The move on boot fail to delete it, the rootrepeal fail to delete it, the rootkiet reveal from sysinternals fail to reveal it ! everything fails. Do how have any experience on this, or do you have any suggestion how to stop this driver from run ?

  Read the article

• Network Drive Via Ethernet Port for Speed?

  - by Yar

  I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

  Read the article

• PostgreSQL disaster recovery options

  - by Alex

  My customer has quite a large (the total "data" folder size is 200G) PostgreSQL database and we are working on a disaster recovery plan. We have identified three different types of disasters so far: hardware outage, too much load and unintentional data loss due to erroneously executed bad migration (like DELETE or ALTER TABLE DROP COLUMN). First two types seem to be easy to mitigate but we can't elaborate a good mitigation plan for the third type. I proposed to use ZFS and frequent (hourly) snapshots but "ZFS" means "OpenIndiana" these days and our Ops engineers do not have much expertise in it, so using OpenIndiana imposes another risk. Colleagues try to convince me that restoring from PostgreSQL PITR backup can be as fast as restoring from a ZFS snapshot but I highly doubt that replaying, say, 50G of archived WALs can be considered "fast". What other options are we missing? Is ZFS an only viable alternative? Can we get a fast Pg DB restore time in the Linux environment?

  Read the article

• Belarc Advisor (Store Passwords using Reversible Encryption)

  - by Steve

  Hi, I'm using Belarc Advisor to examine my PC. Part of BA is a security benchmark summary, which examines components of windows security and provides a benchmark rating. Two items are marked as Fail: - Store Passwords using Reversible Encryption - Password History Size I have opened the Local Security Settings tool from the Control Panel Administrative Tools, and ensured that the "Store passwords using reversible encryption" setting is enabled. Also, I've set the password history to a number. So I'm a bit miffed about the Fail marks. Any idea why the Fail marks appear? Any clues how I can Pass them? Thanks, Steve.

  Read the article

• SQLAuthority News – Microsoft SQL Server 2008 R2 – PowerPivot for Microsoft Excel 2010

  - by pinaldave

  Microsoft has really and truly created some buzz for PowerPivot. I have been asked to show the demo of Powerpivot in recent time even when I am doing relational database training. Attached is the few details where everyone can download PowerPivot and use the same. Microsoft SQL Server 2008 R2 – PowerPivot for Microsoft Excel 2010 – RTM Microsoft® PowerPivot for Microsoft® Excel 2010 provides ground-breaking technology, such as fast manipulation of large data sets (often millions of rows), streamlined integration of data, and the ability to effortlessly share your analysis through Microsoft® SharePoint 2010. Microsoft PowerPivot for Excel 2010 Samples Microsoft® PowerPivot for Microsoft® Excel 2010 provides ground-breaking technology, such as fast manipulation of large data sets (often millions of rows), streamlined integration of data, and the ability to effortlessly share your analysis through Microsoft® SharePoint 2010. Download examples of the types of reports you can create. Microsoft PowerPivot for Excel 2010 Data Analysis Expressions Sample version 1.0 Microsoft® PowerPivot for Microsoft® Excel 2010 provides ground-breaking technology, such as fast manipulation of large data sets (often millions of rows), streamlined integration of data, and the ability to effortlessly share your analysis through Microsoft® SharePoint 2010. Download this PowerPivot workbook to learn more about DAX calculations. Note: The brief description below the download link is taken from respective download page. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• book about psychology of decision and psychology of human

  - by boos

  I'm a unix developer and i want to make career in project/people management as first step. I think sometimes is better to have good communication skill and in general more human skill to make career more fast. Almost in Italy, a lot of people made career development more fast for his human skill and not for his technical skill. Anyone have read some book about psychology to better manage how people and personality work and to exploit decision making situation in the right way? I have found some interesting book about people personality and psychology of decision, but i am in doubt about the usefulness about reading such book. anyone have some experience in this path ? Anyone have found useful to read similar book about how people work, to manage career development in a more fast way and handle people and decision in a more useful way? i have already read peopleware. The table of content of one of this book have: 1 - Judicment and decision 2 - Euristics and sistematics error 3 - Estimating probability and frequency prediction 4 - Risk and decision 5 - rappresentation and decision 6 - Memory, attention and decision. Etc. what do you think about ?

  Read the article

• Additional new content SOA & BPM Partner Community

  - by JuergenKress

  Oracle Fusion Middleware 12c (12.1.2.0.0) Released - Download (OTN, eDelivery) Whitepaper: Next Generation Service Integration Platform - PDF SOA Maturity This article in the Industrial SOA series offers exploration of the fundamentals of applying a factory approach to modern service-oriented software development. Read the article. Enterprise Service Bus The fifth article in the Industrial SOA series answers to some of the most important questions about the use of an enterprise service bus, using concrete examples to clarify areas of application that can be deemed correct for ESBs. Read the article. DevOps, Cloud, and Role Creep DevOps and cloud computing are changing the IT industry - and changing IT roles. An panel of community members discusses what’s happening and how it might affect your job. Listen to the podcast. Industrial SOA - Now chapters 1 to 5 available | Torsten Winterberg White Paper: Cloud Integration - A Comprehensive Solution White Paper: Next Generation Service Integration Platform : SOA Suite on Exalogic IT Briefcase Interview: An Integrated Approach to Mobile, Cloud, and API Management Technologies with Oracle Fusion Middleware Webcast: Oracle Cloud Integration – Information Week Webcast eBook: Oracle SOA Suite – In the Customers’ Words Podcast: Cloud Integration Transitioning from TIBCO to Oracle SOA Suite – Part 1 Events: Oracle Simplifying Integration of Cloud and On-Premise New B2B Book Published for Oracle SOA B2B 11g Get Fast-Data Accelerator in Your Hands Today: Mobile Data Offloading for Telecom Fast Data Accelerator - Blog New Oracle Process Accelerators in Financial Services & Teleco Detect, Analyze, Act Fast with BPM Improving the Quality of Healthcare with BPM Engineers Australia Improves and Automates Business Processes and Completes Engineer Enrollments up to 90% Faster with Middleware Platform - Case Study | PPT Specialized Partner Ataway on BPM Practice - Video eProseed Delivers Processes Skillfully with Oracle BPM Suite - Video Yarra Valley Water Uses SOA and BPM for Orchestration, Re-use and Visibility - Video Victoria University Discusses Oracle SOA & Oracle BPM - Video SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• How to analyze a scenario where a bug didn't get caught and adjust development workflow to prevent similar errors

  - by durron597

  I had a bug that was really difficult to track down, because all the unit tests were green, but the production application didn't work properly. Here's what happened: I had a filter class that set my application to ignore data that was not in some specified time windows. The unit test, which seemed thorough to me, turned green. Additionally, my integration tests also produced results as expected. Production, however, did not work. As a result of the first two bullets, this problem was very difficult to find. It turned out the problem was that my test dates were using my time zone (America/Chicago) but the production data was providing dates in UTC, which I did not realize, and the logic for the filter wasn't correct for UTC dates. (I was using joda time DateTime objects). Where did my workflow break down? Did I fail to produce a spec that specified that the logic needed to handle dates in any time zone? Did I fail to thoroughly consider all cases at the unit test level? Did I fail to insure the integration test was sufficiently similar to production? Other? What changes can I make to my workflow to better prevent this sort of mistake in the future? How can I more effectively debug a problem when there is an issue in production but not in testing?

  Read the article

• Compiz slow under proprietary nvidia driver

  - by gsedej

  Hi! I am using Ubuntu 10.10 and have problem with proprietary nvidia driver for my GeForce GTS 250. I have issue with poor Compiz performance. And there is also open-source "noueau" driver. Proprietary: I tried many versions but neither works fast on desktop. This means 30 FPS without heavy effects. Currently I am using version 270.18. Even normal desktop use feels bad (moving windows) In games (and 3D benchmark) it is really good! (Unigine Heaven works good!) Open-source "nouveau": Very fast on desktop with heavy effects (blur, ...). I have 300 FPS and more, even in Expo mode. Games were good but not as good as prop. And driver causes xorg to crash even the latest (ppa:xorg-edgers/nouveau), so I switched back to proprietary. I also have computer with Ubuntu 10.04, GeForce 8600GT and drivers around 185.x and Compiz works great there. There is similar question Nvidia proprietary driver performance in 10.10 Which version of nvidia (prop) driver is fast in Compiz in Ubuntu 10.10? How do you install a specific version of nvidia driver? Is it the case that each newer driver works slower on compiz?

  Read the article

• @CodeStock 2012 Review: Leon Gersing ( @Rubybuddha ) - "You"

  "YOU"Speaker: Leon GersingTwitter: @Rubybuddha Site: http://about.me/leongersing I honestly had no idea what I was getting in to when I sat down in to this session. I basically saw the picture of the speaker and knew that it would be a good session. I was completely wrong; it was the BEST SESSION of CodeStock 2012.  In fact it was so good, I texted another coworker attending the conference to get over and listen to Leon. Leon took on the concept of growth in the software development community. He specifically referred David Hansson in his ability to stick to his beliefs when the development community thought that he was crazy for creating Ruby on Rails. If you do not know this story Ruby on Rails is one of the fastest growing web languages today. In addition, he also touched on the flip side of this argument in that we must be open to others ideas and not discard them so quickly because we all come from differing perspectives and can add value to a project/team/community. This session left me with two very profound concepts/quotes: “In order to learn you must do it badly in front of a crowed and fail.” - @Rubybuddha I can look back on my career so far and say that he is correct; I think I have learned the most after failing, especially when I achieved this failure in front of other. “Experts must be able to fail.” - @Rubybuddha I think we can all learn from our own mistakes but we can also learn from others. When respected experts fail it is a great learning opportunity for the entire team as well as the person who failed. When expert admit mistakes and how they worked through them can be great learning tools for other developers so that they know how to avoid specific scenarios and if they do become stuck in the same issue they will know how to properly work their way out of them.

  Read the article

• @CodeStock 2012 Review: Leon Gersing ( @Rubybuddha ) - "You"

  "YOU"Speaker: Leon GersingTwitter: @Rubybuddha Site: http://about.me/leongersing I honestly had no idea what I was getting in to when I sat down in to this session. I basically saw the picture of the speaker and knew that it would be a good session. I was completely wrong; it was the BEST SESSION of CodeStock 2012.  In fact it was so good, I texted another coworker attending the conference to get over and listen to Leon. Leon took on the concept of growth in the software development community. He specifically referred David Hansson in his ability to stick to his beliefs when the development community thought that he was crazy for creating Ruby on Rails. If you do not know this story Ruby on Rails is one of the fastest growing web languages today. In addition, he also touched on the flip side of this argument in that we must be open to others ideas and not discard them so quickly because we all come from differing perspectives and can add value to a project/team/community. This session left me with two very profound concepts/quotes: “In order to learn you must do it badly in front of a crowed and fail.” - @Rubybuddha I can look back on my career so far and say that he is correct; I think I have learned the most after failing, especially when I achieved this failure in front of other. “Experts must be able to fail.” - @Rubybuddha I think we can all learn from our own mistakes but we can also learn from others. When respected experts fail it is a great learning opportunity for the entire team as well as the person who failed. When expert admit mistakes and how they worked through them can be great learning tools for other developers so that they know how to avoid specific scenarios and if they do become stuck in the same issue they will know how to properly work their way out of them.

  Read the article

• Naming a class that processes orders

  - by p.campbell

  I'm in the midst of refactoring a project. I've recently read Clean Code, and want to heed some of the advice within, with particular interest in Single Responsibility Principle (SRP). Currently, there's a class called OrderProcessor in the context of a manufacturing product order system. This class is currently performs the following routine every n minutes: check database for newly submitted + unprocessed orders (via a Data Layer class already, phew!) gather all the details of the orders mark them as in-process iterate through each to: perform some integrity checking call a web service on a 3rd party system to place the order check status return value of the web service for success/fail email somebody if web service returns fail constantly log to a text file on each operation or possible fail point I've started by breaking out this class into new classes like: OrderService - poor name. This is the one that wakes up every n minutes OrderGatherer - calls the DL to get the order from the database OrderIterator (? seems too forced or poorly named) - OrderPlacer - calls web service to place the order EmailSender Logger I'm struggling to find good names for each class, and implementing SRP in a reasonable way. How could this class be separated into new class with discrete responsibilities?

  Read the article

• No MAU required on a T4

  - by jsavit

  Cryptic background One of the powerful features of the T-series servers is its hardware crypto acceleration, which dramatically speeds up the compute intensive algorithms needed to encrypt and decrypt data. Previously, administrators setting up logical domains on older T-series servers had to explicitly assign crypto resources (called "MAU" for historical reasons from the T1 chip that had "modular arithmetic units") to domains that had a significant crypto workload (say, an SSL based web server). This could be an administrative burden, as you had to choose which domains got the crypto units, and issue the appropriate ldm set-mau N mydomain commands. The T4 changes things The T4 is fast. Really fast. Its clock rate and out-of-order (OOO) execution that provides the single-thread performance that T-series machines previously did not have. If you have any preconceptions about T-series performance, or SPARC in general, based on the older servers (which, it must be said, were absolutely outstanding for multi-threaded applications), those assumptions are now obsolete. The T4 provides outstanding. performance for all kinds of workload, as illustrated at https://blogs.oracle.com/bestperf. While we all focused on this (did I mention the T4 is fast?), another feature of the T4 went largely unnoticed: The T4 servers have crypto acceleration "just built in" so administrators no longer have to assign crypto accelerator units to domains - it "just happens". This is way way better since you have crypto everywhere by default without having to manage it like a discrete and limited resource. It's a feature of the processor, like doing an integer add. With T4, there is no management necessary, you just have HW crypto everywhere all the time seamlessly. This change hasn't been widely advertised, and some administrators have wondered why there were unable to assign a MAU to a domain as they did with T2 and T3 machines. The answer is that there is no longer any separate MAU, so you don't have to take any action at all - just leave the default of 0. Summary Besides being much faster than its predecessors, the T4 also integrates hardware crypto acceleration so its seamlessly available to applications, whether domains are being used or not. Administrators no longer have to control how they are allocated - it "just happens"

  Read the article

• Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

  - by DS13

  I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

  Read the article

< Previous Page | 45 46 47 48 49 50 51 52 53 54 55 56  | Next Page >