Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 51/62 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Windows 7 64bits installation via USB asks for drivers

  - by Shikiryu

  I just bought a new config ( ASUS p8z68-v lx, i5-2500k + ram and new graphic card ). Coming back and installing it in my old computer, I just saw that my DVD player was on IDE (yup…). So, I needed to install windows 7 64bits from my usb key. Fine, I made my usb key bootable and copy the official DVD on it (the same version that was on my old computer), set BIOS to boot on it first and started the computer up. It worked fine until it asks me for cd/dvd drivers (which is funny since, I do it via USB because I can't plug in my DVD player :D) I have 3 SATA HDD plugged in and that's it. I made a small google search and found that it could be SATA or RAID drivers. Fine, I took another USB KEY and put all my motherboard drivers on it (from the CD sold with the MB) and none of those drivers seemed to work. I tried downloading new drivers from ASUS website and same effect. Any idea but no "buy a new DVD player", I'm now broke for the month :) ?

  Read the article

• Can't install SB750 RAID drivers in Windows 7 for two additional storage drives

  - by jf46

  Mobo: ASUS M4A79XTD, 790X/SB750 OS: Windows 7 x64 I currently have SATA 1-4 set to RAID and SATA 5-6 set to IDE. I have an SSD connected to SATA5 with Windows 7 installed on it, and that works fine. I also have configured a RAID 1 array of two 1TB HDDs, connected to SATA 1 and 2. These don't show up in Windows, and I'm having trouble getting the RAID driver installed. I even tried booting from the Windows DVD and repairing or installing Windows, but when I navigated to the relevant .sys files on my motherboard's driver CD, Windows setup told me that the files in question weren't relevant to my hardware. To be clear: I'm not trying to install Windows on a RAID. I have Windows installed on a separate disk on a separate SATA controller. I just want to get the SB750 RAID drivers installed so that the Windows disk utility can see my RAID 1 array, which is composed of two other disks. Do I need to wipe my SSD and reinstall Windows to get the RAID driver installed? That seems kind of ridiculous, and given what I described above, I'm not even sure it would work. Any help or guidance would be appreciated - thanks! Edit: Also, I've copied the driver files from the mobo CD into system32 and rebooted, no luck. Then I changed HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV\Start from 3 to 0, and that didn't work either.

  Read the article

• ASUS EAH5450 Graphics Card (ATI Radeon HD5450 - 1 GB DDR3) on Windows 2003? Anybody got it to work?

  - by JJarava

  Hi all! I've just bought an ASUS EAH5450 Graphics Card (ATI Radeon HD5450, 1 GB DDR3) for my main system, but I haven't been able to make it work under Windows 2003 (my OS in that system). When I plugged the card, I got a couple of "installing drivers" prompt for things such as "ATI High Definition Audio Device" that got themselves sorted out of the Internet, and then a "Standard VGA Graphics Adapter". The CD that came with the card installs something called "ATI Catalyst Install Manager" and .net 2.0, but no drivers. I've downloaded the latest (WinXP 32bits) drivers from ATI, and the experience is the same: I don't get any drivers installed. My Motherboard is an ASUS A8N-SLI with nVidia nForce 4 chipset (for an Athlon 64X2, somewhat old), but my previous card was an ATi Radeon X700, so it's been working with ATI cards before. On POST, during boot I see a "Display Card" Device (Vendor ID 1002-68F9-0300) and a "Multimedia Device" (1002-AA68-0403), and when viewing the properties of the "Standard VGA", they match the device ID. Any hints? I'd really hate having to get rid of the card, and I'm sure it's not that strange what I'm trying to do...

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  Hi there, I have had some troubles with this: I received a compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. It was given to me on condition i give her the files back. My plan was to turn this into an Ubuntu Server. It booted up no problems even with the ubuntu live disc. After a normal shutdown(not unpluggin the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks etc. Thus i checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower now boots. It booted into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which i assure work perfectly but not with this tower(i recall it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since i am not using an external Video Card, this is onboard VGA. Thanks!

  Read the article

• Running Windows Update inside Windowx XP Mode

  - by Noam Gal

  I am working on a Win 7 Ultimate machine, and was using XP for some development tasks (for compatibility checks). Everything worked like a charm on the XP, including updates. Two days ago I had to switch computer (mainly a new motherboard/cpu), and I had just stuck my old HD inside the newer case. Win 7 worked like a charm - installed all the new drivers, identified everything automatically, no sweat. The trouble started when I tried running my old XP mode - it won't launch, complaining about the cpu change. I figured it's not a big deal, and I deleted the VM, and re-ran XP mode. It told me it can't find it, and offered to create a new one, just what I wanted. I had finished setting up the new XP mode VM, and it seems to work just fine. Got it to use the host network adapter, so I can surf from "inside". But I can't get Windows Update to run. Whenever I click on the "Custom" button on the WU site, after a short while, I get the [Error number: 0x80072EFD] page. I tried several solution from around the web for it (clearing some cache and restarting the wuauserv, even a microsoft fix-it run), but still nothing seems to work. Anyone here has any new tip for me? Thanks.

  Read the article

• lm-sensors - always returns 32 degrees (celsius) for temperature

  - by mopoke

  On my VIA EPIA motherboard (using VIA VT8231 ISA bridge), I get strange output for the lm-sensors temperature reading. It always returns 32 degrees (celsius). I have previously had correct output for temperature (my munin graphs show temperatures typically in the range of 50 to 60 degrees. I've tried uninstalling (and purging) the lm-sensors package, have re-run sensors-detect a number of times and rebooted but nothing seems to change the output. I am running Ubuntu Karmic Koala (9.10). Anyone got any bright ideas on what I might have missed? uname -a: Linux george 2.6.31-16-386 #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009 i686 GNU/Linux cpuinfo: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 399.000 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow up bogomips : 800.04 clflush size : 32 power management: lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1e) 00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 40) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 51) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +32.0°C (crit = +60.0°C)

  Read the article

• Ubuntu 12.04 compiz - disable all compiz plugin - empty screen

  - by gotqn

  A lots of thanks to terdon who spent so many time on this and finally solve the issue. A friend of mine has installed on my new machine Ubuntu 12.04 (I have always been windows user and have no experience with Linux). I started to watch some tutorial about how to make 'Rotated Cube' using 'Compiz',but the cube appears in the form of a list (only two slides). I have thought this could be result of my video cards (only two - one from the processor and one from the motherboard) and they can not support this options. Anyway, I have decided to disable all compiz plugins and options because my friend has set some, and I started to think there is some misunderstanding between the plugins. After, that I got only empty screen(no menu, no icons, anything) and can do nothing. How to fix this? EDIT: When I remove the compiz stuffs (from the console), the menu is shown again. Then I install the compiz again (some of the effect are still not working). After restart or log out/in the menu is hidden again. I suppose that there are some settings that I've broken but they are saved somewhere in the system and remove the compiz do not deleted them and as a result they are activated after compiz is installed again and the PC is restarted?

  Read the article

• How can I get my SATA DVDs working again?

  - by user269051

  My hard drive crashed (WinXPpro), so I took a C drive from a broken PC. The new C drive is Win7pro. Motherboard is MSI K8N Neo4 Platinum, with 4 hard drives installed on SATA 1-4 (nForce4 Ultra); the two DVD drives are loaded on SATA 7-8 (Silicon Image SATARAID5). I've tweaked BIOS settings every which way. The closest thing to success was when each DVD had both a CD and a DVD icon, and blinked green. No CD or DVD could be read in either drive. I assume that the problem resulted from the fact that my new C drive does not have the RAID drivers? I've tried loading from the floppy (doesn't work). I can't boot off the DVD/CD, and switching the DVD's SATA cable to the SATA 3 slot (and pulling one of the hard discs) didn't work. I'd like to be able to use the other two available SATA slots for a mirrored RAID drive, and get my DVDs working again. Any suggestions?

  Read the article

• No OS will boot, all freeze

  - by Gyan

  This is for a computer with the following configuration: Asus P5KPL-AM/PS motherboard Pentium D 820 (dual core 2.8 GHz) 1 x 2 GB DDR2-800 Transcend RAM 1 SATA2 Samsung 160 GB HDD 1 PATA LG CD/DVD Writer PS/2 generic Keyboard USB Razer mouse The computer was working fine till a month ago with a Hitachi HDD in place of the Samsung. But that drive died and I sent it in for warranty replacement. Since then and till last week, the computer had not been turned on. I then got hold of a spare but XPSP2-loaded Samsung drive from another computer and decided to get this computer temporarily running. However, when I tried to boot into XP, it didn't load. It got stuck at the first graphical screen. When trying Safe Mode, the file list would be updated up to diskio.sys and then freeze. If I tried to boot Kubuntu off a CD, I would get past the first menu, but then get stuck at the subsequent graphical interface in the loading process. A similar thing happend with a friend's Windows XP-on-a-pen-drive. I switched the RAM into the other slot, but no luck. Then I booted the Ultimate Boot CD and ran Memtest86+ and a couple of the bundled CPU stress tests but these detected no errors. Some searching on the Internet brought up the notion of the CPU failing to switch from "real" to "protected mode". I'm hoping to get a fix on what the problem is and what I can do about it. Edit: I've flashed to the latest BIOS, but that doesn't help. Also, Knoppix LiveCD also freezes. I notice that the LED in my mouse goes off at the time of freeze, but trying to boot without the mouse connected produces the same result.

  Read the article

• Copy a harddrive from a failed desktop machine using a second working one. [closed]

  - by MrEyes

  Heres the scenario: I have PC-A, an old PC that runs Windows XP but now refuses to boot due to a failed motherboard (or maybe PSU). This PC has a single 80gb IDE drive. I also have PC-B, running Windows Vista, this is working fine. I want to copy all the data off PC-As HDD onto PC-B. To do this I have taken the HDD out of PC-A and connected it as a slave to PC-B. PC-B now boots and sees the additional drive. However, when I attempt to access/copy user folders (i.e. Documents and Settings/[username]/*) I am told that I cannot access the folders due to user permissions. I am doing this under an adminstrator account on PC-B. So the question is, how can I "backup" the data? Preferably without making any changes to the drive contents. The reason for this is that it is possible that PC-A is failing due to a bad PSU, so I intend to replace it before writing off the machine. However I would feel much happier if I had a backup of the data on the HDD.

  Read the article

• Computer restarts without warning; code bcc116

  - by Robert C.

  Processor: Intel i5 4430 4-Core 4x3Ghz Motherboard: msi h87-g41 Graphics Card: Nvidia GTX760 Power supply: eps-750 cm RAM: 8GB I bought a new assembled gaming PC which worked fine for a few days. Then it started rebooting without warning. After it restarts windows 7 gives me an bbc 116 error code. Apparently it's something to do with my video card, either it overheating or wrong drivers. I've installed the latest driver from Nvidia for my graphics card. Since it's brand new it can't be dust, I'm running it with its lid open to see if the problem persists. I'm also running prime95 now to see if it tells me anything else. Using core temp it tells me that my CPU reaches up to 95° celsius with the blend stress test from prime95. Aaaand it just peaked to 100°. Of course it doesn't reach these temperatures at all while idle/gaming. I'm gonna let prime95 run for a night and to see what happens. Until then does anyone know what I should do next?

  Read the article

• Replacing stock Core 2 Duo heatsink fan (just the fan really) with a Dell CPU fan

  - by user647345

  My old heatsink fan broke and I'm trying to reconnect its plugs to a new fan. My Dell CPU fan has some custom Dell plug. I snipped the old fan's wire in half and kept the plug on the end of it. I want to connect it to the Dell fan wire to the plug. The motherboard is a P5Q-e, the stock Core 2 Duo fan was .20A and the dell is .70A. Is that going to matter? The wire from the fan has four wires, the wire with the plug has four wires. They share three, of the four colors: red, black, and blue. Dell's fourth wire is white, while the plug's fourth wire is yellow. Is it safe to assume that I just connect the yellow and the white plug together and match the rest up? I don't want to take any risk of damaging anything. It runs fine passively without a fan, but I have speedstep on, so I would like to use this fan and just fasten it to the heatsink with some twist ties and paperclips and call it a day.

  Read the article

• Hard drive not correctly recognized on a new Windows 7 installation, but works correctly on Windows XP

  - by david

  I'm having problems configuring a hard disk in a brand new, clean Windows 7 installation. System specs: Hard disk: WD VelociRaptor WD6000HLHX (600 GB, 10000 RPM) Motherboard: Gigabyte Z77X-UD3H BIOS SATA mode set to AHCI (not RAID), with disk connected to SATA0 (6 Gb/s port). Windows 7 Enterprise SP1 64-bit The disk is recognized by the BIOS and is correctly identified, with the name and size correctly reported. Windows recognizes the disk itself and reports the device is functioning correctly, but it doesn't appear in Explorer. Disk Management shows the drive, but incorrectly states that it is uninitialized and has no partitions. If I try to initialize the drive, I get an error saying that "the system cannot find the file specified" (what file?). Before connecting the drive to the new machine, I partitioned and formatted it under Windows XP SP2, creating 2 partitions (MBR, not GPT) and copying over a boatload of data. However, none of this data appears under Windows 7. If I put the disk back into the Windows XP machine, I can access the disk and all of its data. Is it possible to get Windows 7 to correctly recognize the disk without having to erase it and start over? If so, how do I do so? I checked this question, which seems to cover the same issue, but it didn't help.

  Read the article

• How do I configure a new (non-OS) raid device under Windows 7?

  - by GregH

  I recently installed 3 new 1TB drives in my Windows 7 (64 bit) system. These are in addition to the 10k rpm disk that I already have running the Windows 7 OS. My intent is to create a RAID 5 volume with the 3 disks. I don't seem to have a problem configuring the bios and creating the resulting 1.9 TB RAID volume. I run in to the problem when I try booting in to Windows. I get a quick flash of a blue screen and then am prompted by windows to do a repair. It tries to repair and then reboots. This sequence lasts indefinitely. If I re-configure the bios back to non-RAID (ACHI) then windows boots fine. The strange thing is that the 1.9 TB volume I configured through the bios actually shows up in windows! Strange since the motherboard is not set up with RAID. I assume that I somehow have to install the RAID drivers from the mobo manufacturer. How do I do this? Is the reason I'm getting the blue screen a result of not having the RAID drivers installed? It's strange because I can find plenty of documentation on how to set up RAID and do a fresh install Windows on to the RAID device, but nothing on how to set up a RAID device on an already running system. Advice is appreciated.

  Read the article

• Windows 7 Blank Screen on Boot / Login

  - by Greg

  I have a new system that's having a few problems... sometimes (seems to be when the PC is cold, i.e. has been switched off for a while, though that could be my imagination) I get a blank blue screen when I boot up. The system boots normally and auto-logs-in. The desktop loads and I'm even able to launch applications, but then everything disappears and the screen goes to the default windows desktop blue colour (not the desktop image, just a plain blue with no mouse cursor). At this point the machine completely locks up - I'm unable to even toggle Num Lock and have to hold in the power button for 5 seconds to kill it. Interestingly if I manage to launch some applications before it goes blank, they will usually crash... sometimes explorer.exe will crash too. When I reboot, the system is fine and stable. I've installed the latest graphics drivers and run memtest86+ for 6 passes (and counting) with no errors. The system specs are: CPU: Intel I7 2.66 @ 3.4GHz RAM: 6GB (3 * 2GB DDR3) HDD: 128GB Crucial M225 SSD Motherboard: Gigabyte EX58-UD3R Gfx: ATI Radeon Sapphire 5870 1GB Note: There are a few similar questions but I haven't found one that matches my symptoms

  Read the article

• CentOS 6.3 X86_64 RAM detection

  - by Peter

  I have a machine with 8GB ram (BIOS sees it, so my motherboard and CPU supports it), and I installed CentOS 6.3 on it. When it starts up, it only see 3.1GB. uname says: 2.6.32-279.1.1.el6.x86_64 #1 SMP BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf65f000 (usable) BIOS-e820: 00000000cf65f000 - 00000000cf6e8000 (ACPI NVS) BIOS-e820: 00000000cf6e8000 - 00000000cf6ec000 (usable) BIOS-e820: 00000000cf6ec000 - 00000000cf6ff000 (ACPI data) BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable) dmesg | grep -i memory says: initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cf700000 Reserving 129MB of memory at 48MB for crashkernel (System RAM: 3319MB) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000cf65f000 - 00000000cf6e8000 PM: Registered nosave memory: 00000000cf6ec000 - 00000000cf6ff000 Memory: 3184828k/3398656k available (5152k kernel code, 1016k absent, 212812k reserved, 7166k data, 1260k init) please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing cgroup subsys memory Freeing initrd memory: 16136k freed Non-volatile memory driver v1.3 agpgart-intel 0000:00:00.0: detected 8192K stolen memory crash memory driver: version 1.1 Freeing unused kernel memory: 1260k freed Freeing unused kernel memory: 972k freed Freeing unused kernel memory: 1732k freed Update: Memtest see all the 8GB, and dmidecode -t 17 | grep Size too. But free -m still see only 3.1 GB. Question: How can I repair/modify the system, to see all the 8GB RAM? Thanks in advance!

  Read the article

• Shadow copy referencing invalid volume from symboliclink

  - by ccook

  I recently replaced my motherboard after the last one failed (was shorting and causing random reboots). I'm sure this was not healthy for the machine, and that a clean install would do wonders, but I'd like to fix the current install. That aside, I've been tracking down a pair of errors in the application log. Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details IVssSnapshotProvider::QueryVolumesSupportedForSnapshots(ProviderId,29,...) [hr = 0x80042302, A Volume Shadow Copy Service component encountered an unexpected error. Check the Application event log for more information. ]. Operation: Query volumes supported by this provider Context: Provider ID: {b5946137-7b9f-4925-af80-51abd60b20d5} Snapshot Context: 29 Followed by Volume Shadow Copy Service error: Unexpected error calling routine Error calling CreateFile on volume '\?\Volume{f4bda86e-049d-11e1-9255-bcaec56690a1}\'. hr = 0x80070020, The process cannot access the file because it is being used by another process. This error is reproducible at command line, creating the two event log entries C:\Windows\system32>vssadmin list volumes vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2005 Microsoft Corp. Error: The shadow copy provider had an unexpected error while trying to process the specified command. Using WinObj from Sysinternals, I have tracked down the global object. '\?\Volume{f4bda86e-049d-11e1-9255-bcaec56690a1}\' - SymbolicLink - '\Device\HarddiskVolume8' Running DISKPART, and running the command "list volume" within it lists volumes 0 through 6, there is not a HarddiskVolume8. How can I remove this reference to HarddiskVolume8, and get shadow copy up and running?

  Read the article

• Slow network file transfer (under 20KB/s) on newly built x64 Win7

  - by Mangoshake

  I am getting <20KB/s for local network file transfer. If I transfer a very small file (less than 100KB) it would start quickly then slow down to <20KB/s. all subsequently network file transfer would be slow, a reboot is needed to reset this. If I transfer a large file it would be stuck on calculating for a long time and then begin with <20KB/s immediately. This is a newly built desktop running Windows 7 x64 SP1. Realtek gigabit LAN from the motherboard (ASRock Extreme3 gen3). Problematic speed is observed on the private LAN, both through ethernet and WiFi. The Router is D-Link DIR-655. Remote Differential Compression is off. Drivers are up-to-date from ASRock's website. I have tested network file transfer to and from another Windows 7 laptop and a MacBook Pro, so I am fairly certain it is the desktop's problem. The slow speed only happens with one direction also, outbound from the desktop, regardless of whether I initiate the file transfer action from the origin or the destination. Inbound network file transfer and internet speeds are fine, so I don't think this is a hardware issue. I am getting 74.8MB/s internet upload speed from speedtest.net (http://www.speedtest.net/result/1852752479.png). Inbound network file transfer I can get around 10-15MB/s. I am hoping this community has some insight for me to troubleshoot this. I don't see anything obviously related from the Event Viewer, and beyond that I just don't know where else to look. Any suggestions are greatly appreciated, thank you in advance.

  Read the article

• Video output vanishes and it isn't the video card... suggestions?

  - by Ira Baxter

  I have a high-end dual processor Dell workstation that operated for several years without problem. Recently, the video output has gone flaky, in the sense that after 2-3 days, it loses synch with the monitor (sometimes you can still see a hashed-mess of the what you expect to see on the screen). Poking at the keyboard, and accessing the file system on the machine from over the network, indicates that the machine is running fine and its just the video. A reboot fixes the problem... for another day or two. This in effect makes the machine unusable. So, I replaced the video card with an exact duplicate bought from e-bay. (I checked after the dupe arrived to be sure, yep, same model number). I still get the same behavior. So unless I believe that both video cards are broken the same way, I have to beleive this is a problem with the motherboard/power supply, neither of which I am inclined to replace. The only other possibility I can think of is a Windows update to the graphics driver. How would I check for this? Anybody had a similar problem? Otherwise we're junking what used to be a perfectly good machine. (Another couple of hours of more wasted effort and that's it in terms of economics anyway).

  Read the article

• Can I setup a test server and then transfer everything to a diff. production server?

  - by Justin

  Hello, I am going to be setting up a "real" server, but it's not being shipped for another week. I was planning on setting up most of the server's functionality using an extra workstation I have. I wanted to set-up Windows Server 2003 or 2008, IIS, Terminal Services, Firewall, and Antivirus on this regular machine. I'd also be installing software like Winzip and VMWare that'll be used on the server. I can't ghost the machine, as far as I've done in the past, because the motherboard/cpu/etc. will all be different. Is there any way to export all of the "server settings" or something like that so I can move everything from test to production? Is there any software out there that does something similar to this? Some things I'm going to have to wait on such as setting up the file server completely in its raid configuration, but I'd like to get the simple server stuff and network setup out of the way. Has anyone done this before? Do I need software, open-source or not, to do this? Or maybe there's a way to export all the server settings in some way? Thanks in advance! Justin

  Read the article

• Enable CPU fan always on

  - by Gundars Meness

  I am using 3 years old overheating laptop and I want my CPU fan to be spinning 24/7 regardless of the consequences. How to make it spin? The problem is that CPU & GPU heats up to 68°C (154 F) right after boot and never goes down, because CPU fan is not spinning full throttle. It starts spinning faster when temperature goes over 70°C and stops when it reaches seventy again. When doing heavy work on databases, it gets from 70 to 90 in no-time and automatically powers off. Bios does not contain any "fan spin 100%" options, just "spin slowly all the time" and "auto" which is more useless than the first one since my fan doesn't have pwm wire. Currently I'm solving this with cooling stand (3x5V), but it isn't much of a help. I would rather use the CPU fan since it is the only fan directly responsible for cooling down CPU/GPU. But how to make it spin 100% all the time? Should I attach it's red power wire to motherboard to get constant 5V (is there such option?), or is there an option to control it via software? Laptop: Samsung R528 2.3 GHz Intel i3 with Nvidia GeForce 310M Bios: Phoenix 03KT.M003.20100622.KSJ (and that is latest update) OS: Ubuntu 12.04.2 LTS with 3.2.0.51 kernel CPU fan: Image/Description Has 5V 0,4A and only 3 pins, no pwm. P.S. Yes, I did clean everything with alcohol, freed the air vents, changed thermal paste etc; that reduced temperature by 4 degrees.

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• There's no sound on Ubuntu with an Intel HDA onboard chip and Realtek ALC1200 codec.

  - by Hanno Fietz

  For a while now, my sound has not been working in Ubuntu. It used to play OK, but after some upgrade (might have been distro upgrade to 9.10), it stopped working. I'm currently running 10.04 on an amd64 architecture. I'm using the builtin audio on a Foxconn motherboard, it's an ATI / Intel HDA chip with an Azalia controller, apparently it's using the Realtek ALC1200 codec. All the gory details here. I found a nice sound troubleshooting tutorial here, which is well-written and pretty extensive, however, I fail to look up the supported "models" for my soundcard. The troubleshooting page says to look for a section giving the codec used by your soundcard, which looks like this for me: !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Realtek ALC1200 Then, I'm supposed to lookup the models for that codec in the file Documentation/ALSA-Configuration.txt in the appropriate directory of ALSA's git repository. Mine actually pointed me to a separate file, Documentation/HD-Audio-Models.txt, which, for my driver version is located here and contains no section related to ALC1200 codecs. I tried putting the driver options probe-mask=1 and model=auto in a config file for modprobe, as suggested elsewhere, but this just lead to snd-hda-intel not able to load at all anymore. I also tried installing the linux-backports-modules-alsa package for my kernel, because the description sounded promising, but that didn't change anything, either.

  Read the article

• Building a PC for Work and play? [closed]

  - by Derek Organ

  Ok, Its been a long time since I build my own PC so I'm looking to get back into it again and build a new one. First off budget is about €800 excluding the monitor and windows 7 licence and mouse. (just bought a new g500) I plan on using my computer for work, lots of applications open at once but none particularly excessive (photoshop being the most demanding, mostly coding tools) I also use it for some gaming, e.g. COD, Starcraft etc. One thing I do want to do eventually is get a really good monitor with hight resolution and maybe 27" so the graphics card needs to be able to make best use of that. So a few questions 1) Is the bottle neck in performance mostly still the harddrives? 2) Aren't most processors e.g. i5 etc even i3 so far a head of other bottlenecks it makes litte difference the higher you go. Isn't the Graphics card dealing with heavy graphics so what really slows because of a slow CPU? So from this my thinking is to get a SSD drive as my primary drive for OS etc and have loads of memory e.g. 6-8GB and a decent mid level graphics card? It doesn't seem at my level worth spending much on CPU and any other parts really. I basic parts off the top of my head Case, Motherboard CPU SSD Drive SATA Drive Power Supply Memory Cooling (fan?) Graphics Card Network Card Keyboard DVD drive Mouse Windows Monitor Am I missing anything? Any helpful tips or general education much appreciated. Thanks, Derek

  Read the article

• Hardware doesn't work some times

  - by Ali

  I have an Asus n51vf laptop. I bought it not long time ago (less than a month) and installed Windows 7 on it. Since that it wasn't new when I bought it, I don't know, if the problem was occuring before re-installing Windows 7. There are two problems, that might (or might not) have something to do with each other: Problem The less annoying problem is that the screen flickers ONLY on YouTube when scrolling and/or pausing/playing the video or moving the curser over the video. The second more timeconsuming problem is that some of the hardware doesn't work when I turn up the computer. Then I have to reboot the computer and try again. Example: I turn on the computer, and the touchpad doesn't work - I then reboot and it works again. This has so far happened to the screen (leading to a black screen), the keyboard and the touchpad. More frequently the mouse. What have I tried to do so far? I tried reeinstalling the touchpad driver (Synaptic Touchpad driver from Asus Support Page) - didn't help at all. I even tried reinstalling the driver when the non-responding mouse on startup-problem occured (using the keyboard), but it asked me to reboot and didn't help at all. I also installed (and reinstalled) the graphics driver; it's a GeForce GT 130M. Now, the problem never occurs spontaneously - it only appears when booting my computer. I can even use the computer for heavy tasks (games, multiple programs running etc.) with no problem at all. I suspect, that the problem is in some booting mechanism that fails: Maybe the Windows driver loading? Motherboard problems?

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >