Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 53/62 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• Seagate 3TB ST3000DM001 hard drive not recognized by Linux, causes fdisk to hang

  - by MountainX

  I'm running Kubuntu 12.04. I have a brand new, never used Seagate 3TB ST3000DM001 hard drive. It's an internal drive. I installed it in a USB enclosure. When I connect it to my PC, nothing happens automatically. When I run sudo fdisk -l, fdisk hangs (without reporting this drive) until I disconnect this drive from the USB port. blkid won't report it either. I tried connecting it to both USB 2.0 and USB 3.0 ports on my PC. I got the same result either way. I tried two different USB enclosures with the same result. If I take the same drive, same enclosure and connect it to a Windows 7 laptop, it is recognized automatically as a USB mass storage device. I want to format the drive (probably ext4) and copy files to it. I have another drive, also in a USB enclosure, that is connected via USB 3.0 to this PC and it works fine. It's a 2.0 TB Samsung HDD. I plan to copy files from the 2TB to the 3TB drive, once I get this issue resolved. My motherboard is an Asus Asus P8B WS LGA1155/ Intel C206/ Quad CrossFireX/ SATA3&USB3.0/ A&2GbE/ ATX. What is the resolution?

  Read the article

• Cannot set video resolution above 640x480 after installing Windows XP SP2

  - by waanders

  I've installed Windows XP SP2 on a computer (there was not SP at all). Now the display settings are set back to 640x480 and 4 bits colors. And I can't change it, it's the only option in Settings tab of the Display dialog of Windows. The screen look awful now, how can I solve this problem? UPDATE: Seems to be a problem with the video driver (thanks @Karan and @Hennes). I did run Speccy (PC-Wizard freezes the computer) and this is a part of the log file: Summary Operating System Microsoft Windows XP Professional 32-bit SP3 CPU Intel Celeron Willamette 0.18um Technology RAM 512 MB DDR @ 133MHz (2.5-3-3-6) Motherboard COMPAQ 0838h (FC-478) Graphics Standard Monitor (640x480@1Hz) Hard Drives 19.0GB Maxtor 2B020H1 (PATA) Optical Drives No optical disk drives detected Audio No audio card detected ... Graphics Monitor Name Standard Monitor on Current Resolution 640x480 pixels Work Resolution 640x450 pixels State enabled, primary Monitor Width 640 Monitor Height 480 Monitor BPP 4 bits per pixel Monitor Frequency 1 Hz Device \\.\DISPLAY1 OpenGL Version 1.1.0 Vendor Microsoft Corporation Renderer GDI Generic GLU Version 1.2.2.0 Microsoft Corporation Values GL_MAX_LIGHTS 8 GL_MAX_TEXTURE_SIZE 1024 GL_MAX_TEXTURE_STACK_DEPTH 10 GL Extensions GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture GL_EXT_bgra

  Read the article

• bootmgr image is corrupt

  - by bacord

  I just replaced my HD with a SSD. I did a brand new install on the SSD and I received the following error after booting BOOTMGR image is corrupt. The system cannot boot. A little configuration for your knowledge. The system used to be a dual boot with XP & windows 7. After replacing the original startup HD with my SSD I changed a setting in the bios to AHCI (I have tested changing it back but this did not help). When I look at the stats on the drive in the bios, it claims that the SSD is in a raid configuration despite the settings not being configured that way. Related System Information: Intel 320 Series 80 GB Sata II SSD JetWay JPA78VM3-H-LF AM2+/AM2 AMD 780V HDMI Micro ATX AMD Motherboard AMD Athlon 64 X2 7 GB ram I have performed 2 fresh installs to no avail. Also, followed this guide and performed option 1 and 2. I have done bootsec/fixmbr and /fixboot. So.. any suggestions?

  Read the article

• Recover data from physically damaged harddrive. What are my options?

  - by Michael Kniskern

  I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a physically damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are. Update I took the HD to Data Doctors, and they told me that the SATA connection was broken to they would need to replaced the data connector and then copy the data to a brand new hard drive. So, with the initial analysis, cost of replacement parts, and data recovery fee it came out to $865.00 USD. The technician specifically stated if this was an older hard drive that would just need to replace the data connector. But because there is specific information related to the individual hard drive in the flash ROM, they need to transfer the data to a brand new hard drive.

  Read the article

• Wireless disconnects every 30 minutes

  - by Kez

  I have had a look through all the related questions and I get the feeling my problem is unique. My wireless connection disconnects every 30 minutes, for maybe 1 to 3 seconds. If I am browsing the web while it happens, I get the page cannot be displayed error message. I have checked the event logs as I was curious to know if there was anything in there. There is. Event 8033: BROWSER - The browser has forced an election on network \Device\NetBT_Tcpip_{B919CC30-25A9-45DD-A09F-549A6262FC9E} because a master browser was stopped. Reported exactly every 30 minutes which coincides with my wireless problem. I am running Windows 7 Ultimate, 32-bit. My wireless is Realtek RTL8187 integrated into a ASUS P5K-E/Wifi motherboard. It is on a workgroup and has never been on a domain. This problem does not affect any other computers. Wireless reception is great, and I have ensured that the wireless unit is transmitting on a frequency not used by any nearby wireless basestations. How can I fix this pesky problem?

  Read the article

• Using my old PC as a web/file server?

  - by Garrett

  I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

  Read the article

• What is a long-term strategy to deal with CPU fan dust in my home office?

  - by PaulG

  There are numerous discussions of CPU overheating and how sometimes this can be corrected by removing the dust from the CPU fan. I have read many of these, but I can't find anyone expressing a long-term strategy to deal with this problem. There are some suggestions here, for example, about how often the inside of the computer should be dusted. But I find this generally unsatisfactory. As it stands, in my rather dusty house (heated by a wood stove, with no central air circulation), I need to vacuum out the CPU fan every 3 to 4 months. At high CPU load, this can make a difference between 65C and 100C. I'm tired of hauling out the vacuum every time I anticipate high CPU load. What steps can I take to deal with this systematically in the long-term? Moving my high CPU load computing to the cloud is not a realistic option. Neither is vacuuming my home office more than once a week! (Details: my computer is on the floor in a Cooler Master HAF922 case, and uses an Intel CPU fan on an i7 chip) EDIT: While this would definitely solve the problem (submerging motherboard in mineral oil), it is a bit of an expensive solution.

  Read the article

• RAM ok in memtest86+ == RAM ok after wake from sleep?

  - by twon33

  I have a Windows XP (32-bit) system that appears stable in normal operation, but was repeatably freezing (hard lock, no BSOD) a minute or so after waking from S3 sleep. Some Googling against the motherboard model and memory manufacturer suggested that I might need to bump up the memory voltage, so I tried it and it now seems to resume without freezing. However, I don't really trust it and I'd like to validate that it's actually stable, especially after resuming from sleep. I've run Prime95 for a few hours with no issues, and am planning an overnight run of Memtest86+, which I expect to pass because the system has been solid whenever I've run it without putting it to sleep. Does something like Memtest86+ exist that actually invokes S3 sleep during operation? Clearly it would need an operator to wake the computer to resume testing, but I don't think I've ever heard of a memory test tool that can do this. Alternately, am I wasting my time? Should a clean bill of health from Memtest86+ indicate stability regardless of whether sleep is involved, or, conversely, does my original problem indicate that Memtest86+ would have failed eventually with the stock voltage if I'd run it, sleep or not?

  Read the article

• KVM error with device pass through

  - by javano

  I am running the following command booting a Debian live CD passing a host PCI device to the guest as a test and KVM errors out; kvm -m 512 -boot c -net none -hda /media/AA502592502565F3/debian.iso -device pci-assign,host=07:00.0 PCI region 1 at address 0xf7920000 has size 0x80, which is not a multiple of 4K. You might experience some performance hit due to that. No IOMMU found. Unable to assign device "(null)" kvm: -device pci-assign,host=07:00.0: Device 'pci-assign' could not be initialized lspci | grep 07 07:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) I shoved an old spare NIC into my motherboard to test PCI pass through. I have searched the Internet with Goolge and found that errors relating to "No IOMMU found" often mean the PCI device is not supported by KVM. Does KVM have to support the device being "passed-through"? I though the point was to pass the device through and let the guest worry about it? Ultimately I want to pass-through a PCI random number generator, is this not going to be possible with KVM? Thank you.

  Read the article

• Boot sequence unlike reboot

  - by samgoody

  When I turn on the computer it acts very differently than when I reboot it. [WinXP Pro, Intel Core2 6600, 2.4GHZ, 2GB RAM, NVIDA GeForce] Boot: Monitor must be plugged into the motherboard or no image. Screen resolution 800x600. Changes to the resolution cause only the top half of the screen to be usable, and are lost when I shut down the computer. Desktop icons arranged in neat rows on left of desktop. Nothing of note in system tray In Device Manger - Display adapter: Intel(R) Q965/Q963 Express Chipset Family In Device Manger - Monitors, two monitors are listed Hibernate and standby work. Reboot: Monitor must be plugged into the graphics card or no image. Screen resolution - 1280x1024 Desktop icons arranged in the cute circle that I put them in. NVIDIA icon shows in system tray. In Device Manger - Display adapter: NVIDA GeForce 6200LE In Device Manger - Monitors, one monitor is listed Hibernate and standby do not work. When awakened after a hibernation it says: The system could not be restarted from its previous location because the restoration image is corrupt. Delete restoration data & proceed to system boot? Double reboot (inconsistent): Monitor must be plugged into the graphics card. Screen resolution - 1024x768 Odd icon shows in system tray whose tooltip says "Intel Graphics" For a while my morning ritual was to boot, wait, reboot using (alt+ctrl+del - ctrl+u - R), wait. Keeping the monitor plugged into the graphics card. But aside for the inefficiency of this method, I sometimes want to standby and can't. On the other hand, the computer is unusable when set to 800x600. Please help, anyone?

  Read the article

• Can Current Backflow from Powered Hub's Adapter & cause PC Damage?

  - by SuperUserMan

  Getting this short: Can current flow from a powered USB hub's power adapter (lying 10 Meter away) back to computer via usb port and cause damage to Computer components like mobo, etc? What should be my concerns? Using a 2 Amp 5V Power adapter to power a 10m Long Active Repeater USB extension cable with 4 port HUB & plugging into PC's Front port, causes PC Chassis fan to keep running (thought slower than regular speed) Front Chassis HDD & power LED to turn on (though bit dim) may be other things which i cant detect/see at chip level, in motherboard?? All this even after PC is shut down (bit scary) More detail (in case still want to read): To run 4 High power (needing 450 mAmps) Wifi Adapters, far away from PC, Bought Active Repeater USB Extension Cable with 4 Ports & power port at far end http://www.ebay.com/itm/33FT-USB-2-0-Male-to-Female-Extension-Cable-Hub-Splitter-Adapter-with-4-USB-Port-/390846115254 Then added a locally bought 2 Amp 240V AC to 5V DC Power Adapter and plugged into USB hub which is a part of & situated at far end of a 10 Meter Active Repeater usb extension cable. Even 4 Wifi Adapters run fine (appear to) using this setup, but running chassis fan, dimly lighted Power & HDD LED, even when PC is switched off is bit scary and surely mean 5V & some current is flowing all though that 10 meter extension cable into my USB port & powering stuff. Can this cause damage? and what should be my concerns. Of course I can't switch off the power adapter (lying 10 meters away from PC) every time I switch off my PC to prevent this.

  Read the article

• How can I control which sound card Ubuntu uses for playback?

  - by GorillaSandwich

  I am dual-booting Ubuntu 9.04 and Windows XP but am new to Ubuntu. In Windows, I use an M-Audio Audiophile 2496 sound card for recording (because it has RCA input jacks for my mixer), but I don't use it for playback (because my speakers use a 1/8 inch jack); instead, I use the motherboard's built-in sound card. I tried to recreate this arrangement in Ubuntu, but despite selecting the built-in card for all playback under System > Preferences > Sound, I still have inconsistent results. Rhythmbox plays back through the integrated card, but Flash content in the browser and games in the OS send their audio to the Audiophile card. I have seen recommendations to use a program called "Jack" to control this, but I installed it and found it baffling. How can I control which card is used for playback, other than disabling one card (as I discovered how to do and explain below)? Also, is there a GUI for disabling hardware, or is it necessary to edit a configuration file?

  Read the article

• How can I get Windows 7 to work with two Nvidia graphics cards with different drivers?

  - by Max

  This is similar to this question, but I am using more similar cards with Windows 7. I just purchased a Zotac Nvidia GeForce 7200 GS. I have a motherboard with two PCI Express x16 slots. There is already an MSI Nvidia GeForce 8800 GTS being used as the primary card, driving two LCD monitors. I would like the Zotac to output to a TV via DVI-out. Unfortunately, when Windows detects the Zotac and installs its drivers, or I manually install them, Windows stops being able to boot up. If I remove them and re-install the MSI 8800 drivers, I can boot again, but Windows can no longer see the Zotac 7200--it shows up as a yellow triangle in Device Manager. I've read conflicting reports about this. Some people claim that Windows 7 will support multiple heterogeneous graphics card drivers, as long as they are all using the same driver API ("WDDM?"). Others say that they have to be using the exact same driver, or it won't work. Others claim that you have to use the exact same card. which is it, exactly? I know I can run the MSI 8800 in SLI if I purchase another, but I don't need that kind of power--I just need HD-out to my television. I read somewhere that running two cards in SLI precludes you from using 100% of their output ports, so I'm not sure if that's an option. I suppose I could also run two MSI 8800's without SLI, but again, that's more power than I need (and more money than I'd like to spend). Also, I don't think this exact model is even manufactured anymore. Any ideas?

  Read the article

• Windows 7 Won't Boot

  - by Vie

  I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

  Read the article

• How do I diagnose the cause of a freeze after resuming in Windows XP (SP3)?

  - by Software Monkey

  I have just built a new computer from parts. Whenever I resume from any sleep mode (S1, S3 or S4) the computer freezes within about 60 seconds of the welcome screen appearing. I have updated the BIOS and all drivers to current from the motherboard manufacturer's site. I have reset BIOS settings to default, including disabling AMD Cool n Quiet. The windows event logs are not helpful at all. Other than immediately after resuming the system is stable as long as AMD CnQ is disabled. The system is: Mobo : MSI 790GX-G65 CPU : AMD Phenom II 965 BE at 3.6 GHz Memory : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21 HDDs : 1 EIDE, 2 SATA in RAID-0 DVD : 1 Card Reader: 1 multi-card reader Keyboard is attached via PS2 and mouse is USB. Any thoughts or pointers would be most welcome. EDIT: It appears that the computer may not freeze if a program is left running which puts it under significant load. I left a stress test running which keeps all cores under 85% load, and my son put the computer to sleep - while this program is running it I have been able to resume from S3 successfully 4 times, compared against about 20 tests with the computer idle which have all frozen. So this may be related to being in an idle state when it resumes.

  Read the article

• How can I determine what is killing my network adapter win7 or vista?

  - by datatoo

  I thought this issue was like another person here, and that downloading the nvidia chipset drivers was the solution. However that is not all that is going on. This machine had Vista 64bit and is now Win7. Same issue with both. I have explicitly been denying network driver updates since getting things working again and when a Windows updates occurs on seemingly benign Office updates the adapter fails to work. Is the update process somehow protecting this machine by turning off things and it fails to recover connectivity after a restart? All that seems to ever work is a system restore. Which does work. Since there are 25 pending updates asking to do there thing, I hate to think this is a one by one update test to find the culprit. Any ideas? This has an integrated nic, video, and I guess audio on the motherboard. ES5200 intel cpu on a gateway 4800-05e I am not quite sure how to determine the actual network adapter. This is a wired adapter. I suppose worst case I can try another adapter if this keeps happening.

  Read the article

• Looking for comprehensive computer monitoring software

  - by cornjuliox

  Summer in this country is insanely hot. So hot in fact, that I think we just lost a machine due to overheating (last recorded CPU/GPU temp was close to 100 C, now it wont start and lets out a long series of short beeps on power up), but that's not my concern here. Since heat is such a problem for me, I use several different pieces of software to monitor temperatures in my machine. I use MSI Afterburner to monitor GPU temp, control GPU fan speed and for some light overclocking, and then I use Speccy and SpeedFan to monitor the rest of the system, CPU temp and everything. The setup works fine for now, but I want to consolidate all this into one program so I'm not juggling several windows at once. Is there any program out there that will let me monitor the following from a single window: CPU Temp and Fan Speed CPU clock GPU Temp and Fan Speed GPU clock, both core and memory Additionally, mobo temp (Speccy lists both CPU and Motherboard temp, I assume that the latter is referring to North and Southbridge temperatures. I'm also looking for the ability to chart these data points on a graph over time, basically to see just how high the temperatures spike under load and for general analysis. It'd be nice if it could handle overclocking of both CPU and GPU in real time too. Any suggestions? Edit: I forgot to mention that I'm on Windows 7, 64-bit

  Read the article

• Debugging Windows PC freeze

  - by Violet Giraffe

  I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

  Read the article

• NIC reordering on RHEL5/CentOS 5

  - by ewwhite

  I have an HP ProLiant DL360 G6 containing two onboard NICs as well as an HP NC375T (NetXen NX3031 chipset) 4-port PCIe card. The system was running with eth0 and eth1 belonging to the onboard NICs and eth2-eth5 on the NetXen card. I recently rebuilt the server and from the kickstart process onward, the NICs were reordered such that the onboard NICs became eth4 and eth5, while the NetXen card took over eth0-eth3. I've had some experiences in the past where I tied NICs to specific interfaces via changes in the ifcfg-ethX config files, but this is the first time I've ever seen an add-in card take over eth0 from the motherboard's interfaces. This impacted my kickstart scripts, so: 1). How can I ensure that the onboard NICs take precedence in the kickstart arrangement. 2). What is the most consistent way to maintain that ordering through repeated reboots, kernel changes (e.g. going from a RHEL mainline kernel to a RHEL MRG realtime kernel), etc. 3). What is the interaction between the /etc/modprobe.conf module/NIC definitions, the /etc/sysconfig/network-scripts/ifcfg-ethX and the /etc/modprobe.d/blacklist functions in this context?

  Read the article

• Computer sending data while turned off

  - by Nicklas Ansman

  I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas ---------Update 1---------- The router is a D-Link DIR 655 with the latest firmware. ---------Update 2---------- I've now reinstalled ubuntu (with 10.4) and I still experience the same problem.

  Read the article

• No video signal at boot with custom built computer

  - by Bart Pelle

  After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

  Read the article

• Ubuntu 12.04/12.10 can't detect windows or any other partitions(Asus z77 UEFI BIOS)

  - by user971155

  I've recently completed tinkering my new pc(motherboard ASUS z77 with UEFI BIOS) and unfortunately not everything works quite well. After installing windows 7 ultimate on a single primary partition(SATA drive) I decided to allocate one more logical partition for additional needs. When I tried doing it with the manager - it said that it couldn't allocate requested size even though I certainly asked for much less than it was available. I thought that it might have been a windows issue and proceded to installing Ubuntu 12.10 x64. When the graphical interface loaded it showed me a message stating that it can't find any other operating system on the drive. When I used custom partioning option it showed me none of my current partions(including that with windows). However, when I boot with "Try Ubuntu" feature it does find them ! I find it weird though. Here's what the console present me with: ubuntu@ubuntu:~$ sudo os-prober /dev/sda1:Windows 7 (loader):Windows:chain ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00072b98 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 100020223 49906688 7 HPFS/NTFS/exFAT /dev/sda3 100022270 1250263039 575120385 5 Extended /dev/sda4 566669312 1250263039 341796864 83 Linux I also tried creating partitions from disk utility which results in error: , Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=51211402240, size=1923000000, type=0x83 Entering MS-DOS parser (offset=0, size=640135028736) MSDOS_MAGIC found looking at part 0 (offset 1048576, size 104857600, type 0x07) new part entry looking at part 1 (offset 105906176, size 51104448512, type 0x07) new part entry looking at part 2 (offset 51211402240, size 588923274240, type 0x05) Entering MS-DOS extended parser (offset=51211402240, size=588923274240) readfrom = 51211402240 MSDOS_MAGIC found Exiting MS-DOS extended parser looking at part 3 (offset 290134687744, size 349999988736, type 0x83) new part entry Exiting MS-DOS parser MSDOS partition table detected containing partition table scheme = 1 got it Error: Can't have overlapping partitions. ped_disk_new() failed Here's what I get when I try to install the system i.stack.imgur.com/pjlb9.png, i.stack.imgur.com/g1lXN.png P.S. It's strange that I even can't create any more partitions neither with disk-utility nor with windows 7 native tools

  Read the article

• How important is dual-gigabit lan for a super user's home NAS?

  - by Andrew

  Long story short: I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup. Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC? Long story long: I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video. With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware. The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video). Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer. I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma. Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration? I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user. Any advice is appreciated. Thanks.

  Read the article

• Laptop Randomly Turning On and Off

  - by Ian Mallett

  So, I have a pretty new laptop, and one of its quirks is that, at random times (though typically in the middle of the night), it seems to wake up from sleep mode, churn a bit, and then go back into sleep mode. I write "seems" because its fans are very loud, so it's obvious when it's not asleep, but during the time it is "on", I can't see anything on the screen. I have researched the problem somewhat, and could only find similar issues; nothing identical. In those cases, it appeared that certain devices could be responsible. Nothing is plugged into my computer during this behavior, but I nonetheless disabled every device's permission to wake the computer through the device manager. This included disabling the magic packet wake for the network (despite its only having a wireless connection). Using "powercfg /lastwake" gives an empty wake history. But, I also went through all the tasks and checked if they would wake the computer. None appeared to. The problem persisted, so, after some more research, I found this, and executed it for all power schemes on the computer. The problem persists. System: OS: Windows 7 Professional CPU: Intel 990X GPU: NVIDIA GeForce 580M/12GB RAM Motherboard: Clevo X7200 Model: NP7282-S1 (Sager-built laptop)

  Read the article

• Computer always freezing after random periods of time. No errors listed.

  - by Wesley

  Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >