Search Results

Search found 16174 results on 647 pages for 'disk space'.

Page 522/647 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

• Raid-1 Western Digital Green AARS, cloning and WD Align Utility

  - by Jaguar

  Hello all, My current setup runs on top of 2x Western Digital 2500KS drives on Raid-1, using the motherboard's 780G raid controller, on WinXP. Everything is fine, but the drives are a bit noisy. I am considering buying 2x WD6400AARS disks which are the 640GB slower 'green' drives, but also feature the Advanced Formatting 4KB sectors. This means that for WinXP the partition will have to be aligned to work properly, else there is a performance penalty. There are 2 questions here: The Green drives from WD are all slower and are (according to WD) susceptible to drop-out's from the controller. Has anyone any experience in this matter? Is there a possibility the controller will drop a drive? If so, can i do anything about it? Secondly, western digital gives a utility to perform the alignment on the partition. The thing is, will the utility see the drives in question as the operating system only sees 1 logical disk? I will be making the transition using a cloning tool (most probably norton ghost) unless i don't find a solution or a clear answer, in which case i'll just buy a win 7 license and make a clean install... thx in advance

  Read the article

• Resize Debian in VirtualBox

  - by Poni

  I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

  Read the article

• Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

  - by dash-tom-bang

  Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced (a 250G SimpleShare which works well enough but I was always afraid of losing the one disk). The Dashboard seems to work ok, except that the DroboCopy function doesn't work at all. This is the backup solution, which I can configure, and if I launch it (e.g. to back up from the old NAS to the Drobo) it spins the NAS, seeking the drive all over hell and creation, until finally giving up an hour+ later with zero files copied. Selecting only a subset of the data yields the same effect albeit more quickly. On my Mac I installed the Dashboard software too, since most of my fiddling with the device will be from my couch in the living room. Finder connects to the box just fine, fwiw, but Dashboard just sits there, "waiting for connection." This is considerably more bothersome than the above paragraph, but I figured I'd give whatever information I have. Drobo is insisting that I send them this "Debug Log" file that their software generates. Does anyone know what's in it? It's encrypted and they won't tell me, which spooks me just a bit; not like I'm terribly concerned about privacy but I don't want to be sending personal information out to every clown who says they "need" it in order to help me. thanks a ton, -tom!

  Read the article

• JAVASCRIPT ENABLED

  - by kirchoffs415

  HI, I hope somebody can help, i keep getting the following message when i log on-- Your Javascript is disabled. Limited functionality is available. it will stay for maybe a day sometimes two.I have uninstalled javascript and reinstalled but still the same. Iam using chrome. any help would be gratefull many thanks Dominic p.s. my system spec is as follows System InformationOS Name Microsoft® Windows Vista™ Home Premium Version 6.0.6002 Service Pack 2 Build 6002 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DOM-PC System Manufacturer Dell Inc. System Model Inspiron 1545 System Type X86-based PC Processor Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Dell Inc. A05, 25/02/2009 SMBIOS Version 2.4 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume3 Locale United Kingdom Hardware Abstraction Layer Version = "6.0.6002.18005" User Name DOM-PC\DOM Time Zone GMT Standard Time Installed Physical Memory (RAM) 3.00 GB Total Physical Memory 2.96 GB Available Physical Memory 1.38 GB Total Virtual Memory 5.89 GB Available Virtual Memory 4.25 GB Page File Space 3.00 GB Page File C:\pagefile.sys My System Specs

  Read the article

• Need clear steps on how to convert a Windows 2000 Server to a XenServer VM

  - by Jay

  The source system is not local. The target host running XenServer is not local. The source system is running Windows 2000 Server SP4 and has 1 disk split into 6 partitions, all NTFS: C: 6 GB (boot) D: 15 GB E: 6 GB F: 6 GB G: 5 GB H: 26 GB Most of the partitions are mostly mostly full ( 60%). What is the most straightforward way to do a P2V migration of the server? I can do minor database & data syncs after the P2V is successful & running as a VM within XenServer, it's just getting to that point which is not clear. The option of installing a Windows 2000 Server from scratch is not available, I need to convert the existing physical server as-is into a VM to be hosted within a XenServer environment. I've looked at XenConvert but it maxes out on converting only 4 partitions in one shot, and I'm not certain how to account for the 2 extra partitions. I'm not familiar with XenServer but it's my only option right now to go P2V.

  Read the article

• Backing up VMs to a tape drive

  - by Aljoscha Vollmerhaus

  I've got myself one of these fancy tape drives, HP LTO2 with 200/400 GB cartridges. The st driver reports it like this: scsi 1:0:0:0: Sequential-Access HP Ultrium 2-SCSI T65D I can store and retrieve files like a charm using tar, both tar cf /dev/st0 somedirectory and tar xf /dev/st0 work flawless. However, what I really would like to backup are LVM LVs. They contain entire virtual machines with varying partition layouts, so using mount and tar is not an option. I've tried using something like dd if=/dev/VG/LV bs=64k of=/dev/st0 to achieve this, but there seem to be various problems associated with this approach. Firstly, I would like to be able to store more than 1 LV on a single tape. Now I guess I could seek to concatenate the data on the tape, but I think this would not work very well in an automated scenario with many different LVs of various sizes. Secondly, I would like to store a small XML file along with the raw data that contains some information about the VM contained in the LV. I could dump everything to a directory and tar it up - not very desirable, I would have to set aside huge amounts of scratch space. Is there an easier way to achieve this? Thirdly, from googling around it seems like it would be wise to use something like mbuffer when writing to the tape, to prevent what wikipedia calls "shoe-shining" the tape. However, I can't get anything useful done with mbuffer. The mbuffer man page suggests this for writing to a tape device: mbuffer -t -m 10M -p 80 -f -o $TAPE So I've tried this: dd if=/dev/VG/LV | mbuffer -t -m 10M -p 80 -f -d 64k -o /dev/st0 Note the added "-d 64k" to account for the 64k block size of the tape. However, reading data back from a tape written in this way never seems to yield any useful results - dd has been running for ages now, and managed to transfer only 361M of data from the tape. What's wrong here?

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine?

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• Install Ubuntu 10.10 from loopback mounted ISO image

  - by Zifre

  I have a laptop with a faulty BIOS that has stopped booting from CDs even though it supports it (and it doesn't support booting from USB drives). I am trying to install Ubuntu 10.10 on it. I already had 9.10 installed. I tried using Kexec, but it refused to accept the kernel image. Eventually I found this page which shows how to make GRUB 2 boot from an ISO file. That worked fine, and I am now running the live image from the file. (If I can get this to work, it will be my new preferred way of installing Ubuntu, as it saves CDs and boots much faster.) However, I can't install it. The installer won't make changes to the hard drive, because the partition containing the ISO is mounted (and can't be unmounted because it is in use). Even if I only choose to use other partitions that are not mounted, the installer refuses to go any farther. Clearly, it should be possible using other partitions on the same disk. Is there any way to work around this issue or force the installer to go ahead?

  Read the article

• Atlassian Crucible very slow on large repository

  - by Mitch Lindgren

  Hi everyone, My company has been running a trial of Atlassian Crucible for some months now. For repositories where it's working properly, users have given very positive feedback about the tool. The problem I'm having is that we have several different projects, each with its own repository, and some of those repositories are very large. One repository in particular has a large number of branches and probably around 9,000 files per branch. Browsing that repository in Crucible is extremely slow. Crucible is running on a CentOS VM. The VM has 4GB of RAM, and I've set Crucible's maximum at 3GB, of which it is currently using 2GB. I've brought this up in a support ticket with Atlassian, and they suggested the following: In particular because you have a rather large SVN repository you will likely find that Fisheye will be creating a large index file on disk. To help improve performance a few things you can try are: Increasing the available memory available to Fisheye (see the document above). Migrating to an external database: confluence.atlassian.com/display/FISHEYE/Migrating+to+an+External+Database Excluding files and directories from your index that aren't needed: confluence.atlassian.com/display/FISHEYE/Allow+(Process) (Sorry for not hyperlinking; don't have the rep.) I've tried all of these things to an extent, but so far none have helped greatly. I was originally running Crucible on a Windows box with 2GB of RAM using the built in HSQL DB. Moving to MySQL on CentOS saw a performance increase for some repositories, and made Crucible much more stable, but did not seem to help much with our biggest repository. There are only so many files/branches I can exclude from indexing while maintaining the tool's usefulness. That being the case, does anyone have any tips on how to speed up Crucible on large repositories, without investing in insanely powerful hardware? Thanks! Edit: To clarify, since I didn't mention it explicitly above, I am using FishEye.

  Read the article

• Why does my computer crash randomly?

  - by Donavon Decker

  The other day I went out to my van to get my Tower and when I opened the trunk it fell out. I brought it into the house and opened it, and everything looked ok. When I started it up, about 1-3 minutes afterwards it would crash. It did this over and over until I reseated the cooler. Everything seemed normal again, until after about 10 minutes of gameplay (any game), it would crash. I reseated my GPU + reinstalled the drivers, however I still get the same error. A while back, I'd check my 'Windows Rating' periodically, and all of them were in the '6.0-6.9' range except for my hard disk usage (always been like that [not relative]). Today I went in and looked, and my Processor and Memory was rated 5.4. I reseated my cpu and my memory, refreshed the windows rating, and then my processor and memory went from 5.4, to 5.1. A few minutes ago I reseated them once again, and now it's back to 5.4. Note: Not sure if this is relevant to the issue, but I updated my bios earlier today I honestly have no idea what the issue is, but I'm getting aggravated at the problem. Here are some images which contain images of my specifications: i1271.photobucket.com/albums/jj623/donxdeck/1_zps09f0607c.jpg i1271.photobucket.com/albums/jj623/donxdeck/4_zps381cd00a.jpg i1271.photobucket.com/albums/jj623/donxdeck/3_zps54bba720.jpg i1271.photobucket.com/albums/jj623/donxdeck/2_zps945d3d72.jpg Thanks for the help

  Read the article

• How to repair Mac OSX without reinstalling?

  - by RahulVyas

  I have an intel PC. I have installed iDeneb Mac OS X in my pc. It's running fine. After that I thought to install Snow Leopard for running the iPad SDK. So I bought a retail Snow Leopard and boot it with Rebel EFI boot loader. When I was installing Snow Leopard, at the end of installation, setup gives an error. So I restarted my PC and boot with Rebel and I saw that mac was there so I boot that into safe mode and Mac OSX runs. After that I install iPad SDK. But when I try to create an application, XCode is not responsive. It hangs when I choose new project, give it a name and save it on disk. After just as I gave name and choose save it hangs. Is there any way i can repair my Mac OSX without reinstalling? I have also unable to boot into normal mode and also without Rebel CD. So I want to boot without Rebel CD and also want to run iPad SDK so please help me to solve this problem.

  Read the article

• File transfer from MP3 player to computer

  - by JP

  I own an old 20GB Creative Zen jukebox (all external screws are gone on it LOL) and I would like to transfer files back to my PC to get them on my new iPod. Problem is, no matter what software I use (WinAMP, Creative Media Source or Windows Media Player), it just stops transferring files on my HD with an error message that says there is no more space on the destination folder. Problem is, there is still 320GB free. I tried lot of things like installing newer driver, latest Zen plug-in for Media Source, latest WinAMP version. Sometimes, it just works and then again, it stops working and I get this non-sense error. Restarting my PC sometime solves the issue by giving me enough time to transfer 10 or 15 more files and then I get the error again and again. Yesterday though I managed to transfer up to 3GB of MP3s on my computer before getting the error. Seems like I'm having a driver issue or a weird behavior from the player and/or the software I'm using. 3 different software can't reproduce the exact same issue by themselves so it must be something related to the driver. I can't find any post of any sort concerning such issue on old forums. Any idea?

  Read the article

• Reorganize Primary/Recovery Partitions and then install Ubuntu Netbook Remix?

  - by Wesley

  Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I recently got a new hard drive and motherboard for it because the original parts were faulty. However, when I got it back, whoever was working on it decided to make my primary partition ~40GB in size, compared to (what appears to be) the recovery partition, which is around 100GB in size. Firstly, I want to make the recovery partition much smaller (around ~10GB or smaller, if possible) and then make my primary partition fill the rest of the space. After that, I want to install Ubuntu Netbook Remix 9.10. I don't know if this is installed within Windows like Ubuntu 9.10 but I want both XP and UNR on my machine at the same time. So basically... how do I resize my primary and recovery partitions such that the recovery is about 10GB or less and the primary fills the rest? Secondly, is UNR installed within Windows? (If not, would it create its own partition on my hard drive, along with the XP partition, and the recovery partition?) Thanks in advance.

  Read the article

• Control Panel for MySQL and PostgreSQL server

  - by jfreak53

  I am looking for a control panel for a CentOS system that will allow me to add user's that can control their "own" MySQL and PostgreSQL Databases. I don't want to have to spend the $25 a month for cpanel on a dedicated to do this. Plus cPanel comes with all the rest like webserver and email that I don't need these to have. Basically I want to be able to create users that can create their own databases and only see those that they have created. I want to be able to control their disk space as with most panels. They need to be able to create their own DB users as well. Kloxo won't work as it doesn't natively support PostgreSQL. I tried straight PHPMyAdmin, but it won't let the user's create their own DB's unless they can also see everyone else's. VirtualMin I just can't get to work at all! ha ha I installed it an though it works great for itself if a user signs into Usermin they can see all DB's. If they sign into PHPMyAdmin (which basically means any program that directly connects to MySQL) they see all DB's. If they login to virtualmin then yes, they only see their's. But that won't work. I can't seem to think of another way to do this. I can use webmin and usermin directly but PHPMyAdmin again let's the user's I create either see only one DB and create none, or see all DB's. So that sound's like a permission problem in MySQL and PostgreSQL.

  Read the article

• Window Management for Mac OS X

  - by Paolo Maffei

  Ok, I feel dumb. I've put many hours into this and found nothing, yet. When I was using Windows I had this little tool called WinSplit Revolution. What it did was letting you divide your screen into how many and of how much size you choose "virtual monitors". You set one time of you want to divide your monitor, then everytime WinSplit is opened the monitor is automatically divided into Virtual Monitors. Screenshots: http://www.google.com/images?hl=en&q=winsplit%20revolution&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1045&bih=499 I'm now using a 30' which i want almost always divided into 4 equal size "virtual monitors" (plus my mbp 13' those will be 5 1280x800 virtual monitors) Now I've switched to Mac OS X and can't find anything that does just this efficiently. I tried Divvy but I found no way to divide my screen into arbitrary "virtual monitors", I need a couple of clicks to select a 3x3 space on a 9x9 grid. Before starting coding something like this can you tell me if you already know of some software that does window management like this?

  Read the article

• Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

  - by Wolvenmoon

  I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

  Read the article

• Cannot login to Windows7 in normal mode but can in safe mode

  - by Guy

  I have a Windows 7 Ultimate computer (Shuttle) that I built myself and in it I put a Solid State Drive (SSD). It's been working well for a number of months but now when I start it there are problems. I have 2 users setup on the computer and when I try and sign in with either user it claims that the password is incorrect. I could understand the odd typo but I've had my wife try it as well and we've got the passwords correct. On top of that it will remain at the login screen for 1 minute and 20 seconds and then spontaneously reboot without shutting down. So I'm trying to work out if this is a hard disk problem or something else. Any ideas? (I have a nightly backup to a WHS so it will be easy to recover but I don't want to do that unless I have to and don't want to waste time putting in a new HD just to discover it's something else.) More info: If I start in Safe Mode I am able to login with the password and all appears as normal as it can in Safe Mode. However, normal boot continues with same problem.

  Read the article

• Editing a windows XP installation's registry without being able to log in.

  - by Alain

  I've got a windows XP installation that has a corrupt registry. A worm (which was removed) had hijacked the HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon entry (which should have a value of Userinit=C:\windows\system32\userinit.exe When the worm was removed, the corrupt entry was deleted entirely, and now the system automatically logs off immediately after attempting to log in. Regardless of the user and boot mode, no accounts can be logged in to. The only thing required to correct this behavior is to restore the registry key, but I cannot come up with any ways of editing the registry without logging in to an account. I tried remotely connecting to the registry but the required services aren't enabled on the machine. I tried booting on the same machine using the BartPE boot CD but I could not find any way of editing the registry on the C:\Windows installation - running regedit only modifies the X:\I386\ registry in memory. So, what can I use modify the registry of an un-login-able Windows XP instance so that I can log in again? Thanks guys. EDIT: The fix worked. The solution to the auto-logoff problem was, as hoped, to simply add the value mentioned above to the appropriate registry entry. This can be done using the BartPE Boot CD, as described in the accepted answer below, but I used the Offline NT Registry Editor software mentioned in another answer. The steps were: Boot from the NT Registry Editor CD Follow the directions until the appropriate boot sector is loaded. Instead of using one of the default options for modifying passwords or user accounts, type "software" to edit that hive. Type '9' to enter the command line based registry editor. Type "cd Microsoft" (enter) "cd Windows NT" (enter) "cd CurrentVersion" (enter) "cd Winlogon" (enter) Type "nv 1 Userinit" to create a new value under the Winlogon key Type "ev Userinit" to edit the new value, and when prompted, type "C:\windows\system32\userinit.exe" (enter) Type 'q' to quit the registry editor, and as you back out of the system, follow directions to write the hive back to disk. Restart your computer and log in - problem solved. (generic 'warning: back up your registry' disclaimer)

  Read the article

• Increasing SQL Server / Sage performance with SSD? (Dell PE T410)

  - by Anthony

  I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/SQL Server VM all the RAM I can (12GB) & SQL Server RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL Server VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

  Read the article

• How to remove that extra text from URL titles in Firefox browser?

  - by amar

  I am using Firefox with Vimperator. On Mac I use Shiori to bookmark. I also use Pinboard's default add-on (on both Mac and Windows, but mainly on Windows as there's no Shiori). When I used to bookmark, I had this behaviour[A] (before changing Vimperator options): Example: URL: xyz.com TITLE: xyz website Pinboard add-on would fetch the title as xyz website which was fine (I reckon it directly fetches TITLE form the URL). But after installing and starting to use Shiori the title I was getting in its "title" field was xyz website - Vimperator exactly the same what I could see in tabs (seems it's getting what the browser is feeding it). So, I :set titlestring= in Vimperator to remove that extra Vimperator from title. Now, this is what I am getting [B]: When I try to bookmark using Pinboard add-on the title is undefined Using Shiori it results in xyz website - undefined. I tried to change it back to original[C] :set titlestring=Mozilla Firefox (assuming this was the original, before Vimperator) but the results are still the same as [B]. How to get read of that extra - undefined or that extra - Vimperator or - Mozilla Firefox for that matter, while bookmarking pages either with Pinboard add-on or Shiori? One workaround is, instead of no string just add a white-space while setting title in Firefox via Vimperator there but that results in - appended to titles.

  Read the article

• IPv4 not enabled in Windows 7

  - by RidDeBakTiYar

  I have a Netbook with Win 7 Starter edition. I am not able to get IPv4 enabled/installed in the Netbook and hence not able to network/connect to Internet. It says "Limited access" when I check connections. It all began when my system crashed and I was not able to get thro beyond the boot screen. The system advice me to try repair with the original OS cd and I did the same. After that the Netbook has booted, but is not able to network. On a detailed study I found that the Network adapter has both IPv4 and IPv6 Protocols, but there are some differences. The IPv4 is not having the "Properties" enabled to configure, while the IPv6 is having "Properties" enabled. I have only a IPv4 Wired and Wireless at home and its not able to get the Netbook connected as it cannot I had tried uninstalling the Adapter to allow windows to automatically detect and install. Using the "netsh" command to uninstall and install, but not having any change in status. There is a option to "Have disk" under add Protocol, but I don't know how to give the standard IPv4 for installation (asking for *.inf). Any help in solving the issue will be very much appreciated

  Read the article

• Troubleshooting Mid 2007 iMac RAM upgrade

  - by MDT

  I am trying to install new RAM in my friends iMac, something I have done several times before. We unplugged the computer before performing the upgrade, used anti static wrist bands, and yes the memory is compatible and inserted correctly. The stock RAM was Hynix 1gb pc2-5300s-555-12 and the memory we are replacing it with is 2x2gb Centon CMP800SO2048.01. Now I know this model number suggests that the ram is 800MHz and the iMac is only 667MHz but it clearly states on the box that this RAM is PC2-5300 667MHz compatible. The problem is, that when I install the new RAM I get little response from the computer. I hear the hard drive and disk drive start to initialize, but then they just stop and the screen remains black. I have tried every variation of the new RAM and the old RAM in both slots and even tried the same RAM from my old iMac and I just can't get it to boot. Has anyone ever had a problem like this? Thank you in advance for any and all input on thus issue!

  Read the article

• Exchange DEAD! Server recovered but no users can log in

  - by erotsppa

  Yesterday we had a hardware failure and brought our exchange server down. The hardware was repaired and the server was brought back up. Windows server 2008 did the disk check upon bootup and everything was recovered. However, no users can log into their exchange account! This is true with IMAP, Exchange and OWA! All three of them, refused to accept any users. For example when I try to access OWA, I get the following page http://pastie.org/584061 We verified that all the services are up (IMAP, POP, SMTP, IIS etc). We were able to connect to all those services with their respective ports through telnet. What could be the problem? It looks like the database cannot be mounted, from Exchange management console, when I try to mount the database it gives: Microsoft Exchange Error Failed to mount database 'Mailbox Database'. Mailbox Database Failed Error: Exchange is unable to mount the database that you specified. Specified database: SERVER\First Storage Group\Mailbox Database; Error code: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-528) . I read online that there is a repair utility, so I tried it. I navigated to my edb file and ran eseutil /p "Mailbox Database.edb". It printed the following output *Repair completed. Database corruption has been repaired! Note: It is recommended that you immediately perform a full backup of this database. If you restore a backup made before the repair, the database will be rolled back to the state it was in at the time of that backup. Operation completed successfully with 595 (JET_wrnDatabaseRepaired, Database cor ruption has been repaired) after 885.750 seconds.* However I am still unable to mount!

  Read the article

• Conditionally changing MIME type in nginx

  - by Peter

  I'm using nginx as a frontend to Rails. All pages are cached as .html files on disk, and nginx serves these files if they exist. I want to send the correct MIME type for feeds (application/rss+xml), but the way I have so far is quite ugly, and I'm wondering if there is a cleaner way. Here is my config: location ~ /feed/$ { types {} default_type application/rss+xml; root /var/www/cache/; if (-f request_filename/index.html) { rewrite (.*) $1/index.html break; } if (-f request_filename.html) { rewrite (.*) $1.html break; } if (-f request_filename) { break; } if (!-f request_filename) { proxy_pass http://mongrel; break; } } location / { root /var/www/cache/; if (-f request_filename/index.html) { rewrite (.*) $1/index.html break; } if (-f request_filename.html) { rewrite (.*) $1.html break; } if (-f request_filename) { break; } if (!-f request_filename) { proxy_pass http://mongrel; break; } } My questions: Is there a better way to change the MIME type? All cached files have .html extensions and I cannot change this. Is there a way to factor out the if conditions in /feed/$ and /? I understand that I can use include, but I'm hoping for a better way. Putting part of the config in a different file is not that readable. Can you spot any bugs in the if conditions? I'm using nginx 0.6.32 (Debian Lenny). I prefer to use the version in APT. Thanks.

  Read the article

• Convert DVD Movie to MPEG and view on PS3 via Windows Media Server 12

  - by Vidar

  I think Apollo spacecraft missions to the moon were easier than this! I have tried dozens of DVD ripping software and media servers and have had limited success in trying to convert all my DVDs into file format so they can be viewed on PS3. I have also been on dozens of forums and it's all getting a bit confusing, some advice is out of date, some software is no longer updated - updates have been applied to PS3 operating system and windows and so on and so on. There has to be a way to get all this knowledge and information in one place that's up to date so people can do the same thing as me. Can anyone give me some definitive software and/or advice to do the following: I have over 200 DVDs - I want to convert these to VOB files (rename to MPEG so WMS can stream them). Store on hard disk and view via Windows Media Server 12 (Windows 7). I will then be able to view these via my PS3 in my lounge and never have to get out another DVD case again. I don't want to encode to any other format like MP4 with H.264 because I will lose some of the original quality. So MPEG-2 is fine for me. Note: I have been using DVD Shrink but it gives odd results sometimes. The main problem being that once the DVD has been ripped - WMS shows the wrong playing length of the film, however if I use VLC Media Player it will play through the whole film OK. This is obviously no good when it comes to streaming on the PS3.

  Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >