Search Results

Search found 18954 results on 759 pages for 'connection reset'.

Page 529/759 | < Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >

• some questions about raid card

  - by cpps

  I have some questions about raid card. Use LSI MegaRAID® SAS 9260-8i raid card as a example. There is only two connection ports on the raid card, and they provide two cables that can connect 8 SAS/SATA storages. The document say it can connect "Maximum 32 drives per controller", I want to know how can I connect more than 8 hard disks with this card. Is that they say "Eight internal SATA+SAS ports" means they provide two cables which can connect 8 hard drives, but you can use other way to connect Maximum 32 drives? The other question. I see host bus adapter has raid integrated , so what is the difference between host bus adapter and raid card. Are they the same? I also know is SAS/SATA Expander's function only to connect more hard drives? Thanks in advance.

  Read the article

• Finding, which web component is causing problems during page loading

  - by Juhele

  I am using windows version of Firefox 5.0 and last few days I found that on one website (similar focus as stackexchange but in Czech), is something wrong as my browser loads it very slowly (while the connection is ok and never had problems with it). There is also another guy trying to solve the almost the same problem, but no help yet. So I would ask, whether there is some Firefox plugin showing which page components are loading and which could help me to find out the problem. I am writing from office pc so we have blocked all the social networks like FB, Twitter etc. and I also use Adblock Plus - however, deactivating it does not have any effect on it. thanks

  Read the article

• MSDTC Port 135 open bi-directionally

  - by Stephen Lacy

  I have two servers, a web application server and an SQL Server database running on its own server. I have a firewall between these two servers. Do I have to open port 135 on both the SQL Server and the Web Application Server. Does the SQL Server open its own connection to the Web Application Server on port 135 or any other port? Do I have to in component services point the Web Application Server MSDTC at the SQL Database Server? If the firewall is completely open, the settings in component services set to allow remote connections, remote administration etc is there any other settings that need to be changed in order to allow remote connections to the SQL Server MSDTC?

  Read the article

• Corrupted network from ipad

  - by lisa

  All wireless clients were kicked off the network (3 PCs & 1 iPad). Only a PC with a wired connection was still able to connect. This morning I discovered that the network had been renamed and a new password had been assigned. Via Linksys Updater I gave a new password. Strangely, in my Windows Control Panel/Network connections our old password now exists as an unsecured network, that I cannot delete! When I attempt to connect using this bastard network, I get an Apple Push error. Linksys WRT610N PCs all using Windows 7 (wired & wireless) iPad 2

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• USER_LOGIN audit log with incorrect auid value?

  - by hijinx

  We have a CentOS 6.2 x86_64 system that's logging what looks to be erroneous audit information. We were receiving alerts for failed logins by a user who wasn't actually trying to log in. After some diagnosis, we figured out that the source of the events is our tool that periodically checks to see if SSH is answering. When that happens, we see this log this entry: type=USER_LOGIN msg=audit(1340312224.011:489216): user pid=28787 uid=0 auid=501 ses=8395 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=login acct=28756E6B6E6F776E207A01234567 exe="/usr/sbin/sshd" hostname=? addr=127.0.0.1 terminal=ssh res=failed' This is the entry we get whenever there is an incomplete ssh connection, but usually the auid is the same as the ses= value. For some reason, on this system, it's using a particular user's auid, regardless of the login user. For example, ssh'ng to this system as [email protected] and cancelling before providing a password generates this error. Attempting to log to an unrelated account with a bogus password will also create an entry with the incorrect auid value.

  Read the article

• What should be the path for storing Maildir e-mails?

  - by Thufir

  Am I storing e-mails to the correct path? Working from the dovecot-postfix package I'm able to deliver e-mails to myself as so: thufir@dur:~$ thufir@dur:~$ telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) HELO me 250 dur.bounceme.net mail from:<[email protected]> 250 2.1.0 Ok rcpt to:<thufir@localhost> 250 2.1.5 Ok data 354 End data with <CR><LF>.<CR><LF> subject: to evolution mail we'll see if this goes through. . 250 2.0.0 Ok: queued as 43D6F2A07C1 quit 221 2.0.0 Bye Connection closed by foreign host. thufir@dur:~$ and then here's the message: thufir@dur:~$ ll Maildir/new/ total 20 drwx------ 2 thufir thufir 4096 Nov 16 18:56 ./ drwx------ 5 thufir thufir 4096 Nov 16 18:56 ../ -rw------- 1 thufir thufir 410 Nov 16 11:57 1353095866.M305477P3932.dur,S=410,W=422 -rw------- 1 thufir thufir 424 Nov 16 17:20 1353115248.M841336P2990.dur,S=424,W=436 -rw------- 1 thufir thufir 445 Nov 16 18:56 1353121003.M187706P3838.dur,S=445,W=457 thufir@dur:~$ thufir@dur:~$ nl Maildir/new/1353121003.M187706P3838.dur\,S\=445\,W\=457 1 Return-Path: <[email protected]> 2 X-Original-To: thufir@localhost 3 Delivered-To: thufir@localhost 4 Received: from me (localhost [127.0.0.1]) 5 by dur.bounceme.net (Postfix) with SMTP id 43D6F2A07C1 6 for <thufir@localhost>; Fri, 16 Nov 2012 18:55:55 -0800 (PST) 7 subject: to evolution mail 8 Message-Id: <[email protected]> 9 Date: Fri, 16 Nov 2012 18:55:55 -0800 (PST) 10 From: [email protected] 11 we'll see if this goes through. thufir@dur:~$ Do I perhaps have postfix misconfigured? I ask because evolution seems to use a different path for mail.

  Read the article

• Tracking costs within one AWS account

  - by caius howcroft

  I have what I'm sure is a very common problem. Our company has many projects and groups working for different clients. We do a lot of our development work in the cloud and deploy our solutions there. We have a VPC set up that isolates projects from each other in their own subnet and that VPC is getting a hardware VPN connection back to HQ. We need to keep track of the cost run up by every project. The way I currently implement this is by providing my own tools for starting and stopping instances which log which user (and thus which project) to bill the instance too. This works okay for BoxUsage costs but not for other costs. I could create a separate account for each project and use consolidated billing, this I think would allow me to pay once but track costs per "project", but I would then not be able to share common resources (like bring account B's running instances inside the same VPC). Does anyone have any suggestions? Cheers C

  Read the article

• Impossible quandrary involving UCK, graphics card, and Nvidia drivers

  - by InkBlend

  I have a computer that I want to install Ubuntu on. It is an older gaming computer with a Nvidia graphics card. When I attempt to boot any unmodified Linux distribution onto it, I get a "Boot error" message, which I assume is because the computer uses a discrete graphics card, which the Linux kernel does not have support for. Ordinarily, that would not be a problem, as I would just plug the monitor into the VGA port built in to the motherboard. However, this particular model of motherboard does not have an on-board graphics connector, so I am stuck with using the graphics card connection. That further would not be a problem; all I would have to do would be to use UCK to create a customized Ubuntu image that included the graphics drivers. Except for the fact that the Nvidia Linux drivers must be installed on a computer with a Nvidia graphics card present. So while using UCK, the driver installer fails with a message stating that there is no Nvidia graphics card present. How do I get Ubuntu on my desktop computer?

  Read the article

• ISA Proxy server

  - by user59931

  Have a proxy at work that runs Microsoft ISA. i used to be able to connect using 11.10 with firefox no problem at all. i could either put the settings in firefox or the settings in ubuntu network proxy settings. this would give me a connection no problem ( slow due to the work network being really lame) since i upgraded with 12.10 firefox just crashes if i have any proxy settings (manual added the proxy settings). if i connect to a diffrent network without the proxy settings it works fine and doesn't crash i tried chrome to see if that would work... simular problem. chrome doesn't crash but is so slow it just times out all the time and can take 10min for a page to load.... not really sure where to go with this? i have tried a clean install of 12.04 on 2 diffrent computers and also both tried just upgrading from 11.10. Only answer i can see at the moment is role back to 11.10 :( i have tried all sorts like turning of IPv6 to see if that would make any diffrence but no joy... really am lost now. whats weird is the repositys are also really really slow through 12.04. 50 megs took an hour to download (ISA server has Ubuntu rep servers enables without authenication). really am lost

  Read the article

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• Cloud services can't be reached from complex customer infrastructure

  - by Nock

  We have several services running on a cloud, they all are hosted on Windows Server 2012 R2, have public IP address and specific port. Some of our customers can't reach them because for "some reason" the ports are cut between a firewall between them and us. (some customers are using a shared internet connection in a multi tenant office and they can't change firewall communication) Well, you get it, we don't have the possibility to make all the firewall "allowing" the communication. My customers all runs Windows 7 at least. What is the best counter solution in such case, using Microsoft (Windows Server) technologies? The best would be some kind of tunneling communication or VPN, but the customer should also be able to access his/her enterprise resources. Bby the way, today we using IPSec using Windows Firewall to secure the communication, is IPSec tunneling a solution for us? Otherwise, is there a service in Windows to enable some kind of VPN between a client and a server but only for a given set of servers?

  Read the article

• Communicate from PC in internet to remote GSM device

  - by Jakub Jezik

  I have several remote devices that use GSM modem and gather data. I need to communicate with those devices from a PC station located in a office using the dial up connection. Is there a way to do this WITHOUT an additional GSM modem connected to that PC? Is there some way to accomplish PC to remote GSM device communication using e.g. VoIP or similar technology? I want to avoid installing an additional GSM modem in the office and use some software solution instead.

  Read the article

• Should `keepalive_timeout` be removed from Nginx config?

  - by Bryson

  Which is the better configuration/optimization: to explicitly limit the keepalive_timeout or to allow Nginx to kill keepalive connections on its own? I have seen two conflicting recommendations regarding the keepalive_timeout directive for Nginx. They are as follows: # How long to allow each connection to stay idle; longer values are better # for each individual client, particularly for SSL, but means that worker # connections are tied up longer. (Default: 65) keepalive_timeout 20; and # You should remove keepalive_timeout from your formula. # Nginx closes keepalive connections when the # worker_connections limit is reached. The Nginx documentation for keepalive_timeout makes no mention of the automatic killing, and I have only seen this recommendation once, but it intrigues me. This server serves exclusively TLS-secured connections, and all non-encrypted connections are immediately rerouted to the https:// version of the same URL.

  Read the article

• How do I connect to my home's primary wired network through an extra (wireless) router?

  - by Matthew Patrick Cashatt

  Thanks for looking! I have set up a desktop PC in my workshop. The Cat 5 cable connects from this PC to a wireless router which is connected to my home network. The Internet connection is working just fine. However, the "wired" network this is on shows up as a different wired network than the one that the PCs inside my house are connected to. This is a problem because I would like to connect this workshop PC to various shared resources like printers, HD Homerun (cable tv card), shared drives, etc. When I go to "Network and Sharing" and attempt to find the network that the PCs inside my home are connected to, I don't see it. Any help is appreciated. Thanks!

  Read the article

• Infected Win XP disk not openable on a Vista computer

  - by Retired57

  How can I read a WinXP partioned disk that is infected and shows up on a USB connection to Win Vista computer as a single partition that Vista cannot see the contents? The XP computer HDD is partioned into 4 partitions. It became infected, and all attempts to clean it have failed. Applications begin to launch, but are then shut down by the infecting agent. Using a major Anti-virus Co. boot disk (which was unable to connect to the Web, probably because the infecting agent stopped it) with virus definitions dated after the disk became infected, the resultant scan showed no infection. I bought a USB cable to connect the IDE drive to my Vista computer, but when I open Win Explorer, it sees the disk, but does not show any contents. It indicates it is a single partition that is valid. However in all the ways I have tried it does not show drive contents. Any suggestions on what to do next?

  Read the article

• Multiplayer approach for tablets on wi-fi (FPS/TPS)? Server authority, etc

  - by Fraggle

  Looking for some guidance or what has worked well for others in implementing a multiplayer FPS/TPS type game on tablets (probably just 2-6 players at a time). The main issue being that tablets/phones are typically "less" connected than say a console or pc might be. And therefore, my thought is that to have complete Server authority of everything is not going to work. But maybe I'm off base on that. So I guess I'm struggling with what (if anything) should happen on a central server and what should happen locally. Or is centralized approach even needed? Some approaches I might do: Player movement : my thought is to control this locally (player-owner) and update server with positon (which then sends out to other clients). Use client side prediction for opponent players so that connection loss will not show a plane for example stop in mid air. Server will send update and try to smoothly correct an opponent player position to server updated one.But don't update owners position on owners device from server. Powerups (health kit/ammo/coins/etc) : need to see them disappear immediately, so do it locally. Add the health locally, but perhaps allow for server correction. If server doesn't see player near that powerup, reject the powerup and adjust server health for player. Fire weapons: Have to see it happen right away, so fire locally, create local bullet and send on its way. Send rpc to server so that this player on other clients also fires. Hit detection: Get's trickier. Make bullet/projectile disappear locally, and perhaps perform local hit animations (shaking, whatever). non-authoritative approach= take the damage locally and send rpc to server or others to update health and inform of hit. Authoritative approach-Don't take the damage, or adjust health. Server will do that if it detects a hit. Anyway that's my current thought stream. Let me know what you think of the above or what has worked for you.

  Read the article

• Has anyone figured out how to use same username with different passwords (Windows)

  - by Coder

  Tried Googling, tried net use, and anything I could, with no results. I have a PC with users, and I have a network server with shared folders. For some users the usernames of the share and local account match, but the passwords are different (a good security practice). Unfortunately, Windows doesn't want to remap the drives on login, and asks for credentials when I try to connect. If I enter the password, the connection succeeds, but it still fails on next login, even if I have checked the "remember" checkbox. On PC: usera@machinea pass1 On NAS: usera@nas pass2 net use z: \\nasip\usera /user:nasip\usera pass2 /persistent:yes Credential store seems to have the user credentials stored... But the mapping fails all the time.

  Read the article

• Joining a network with a Virtual Windows Server 2008 R2

  - by Triztian

  Hi all, here's my case, I have set up a share in a virtual windows server 2008 R2, the server is hosted by GoDaddy my question is, how do I access the server's public folders, I need to open a file locally (on the client) and to do that I need the server to show up in my Network locations, I have the right credentials and have created a special group that has access to the particular folder that I'm sharing the problem is I don't know how to add the server to my network locations. I have tried VPN Connection but it is my understanding that it cannot be done since it is virtual share server. Any help is trully appreciated.

  Read the article

• Sonicwall Global VPN Client fails to connect, despite successful connections from other computers from behind the same router

  - by JesperE

  I've recently been unable to connect to our Sonicwall VPN at work. The Sonicwall client is stuck on "connecting", and the log says "The peer is not responding to phase1 ISAKMP requests". The weird thing is that this is not an issue with my own PC, only my work laptop (Lenovo W530 running Windows 7 64-bit), and this has only appeared recently. This ought to rule out any problems with my ISP blocking VPN, or issues with the router itself. My company's IT department says that they cannot see anything in their logs when I'm trying to connect. My conclusion is that something is wrong on the laptop itself. Disabling the firewall does not help. Can the VPN connection be blocked in other ways? What should I be looking for? EDIT: This problem has "magically" disappeared, without any changes done in my network. I can only assume that this was caused by some network glitch with my ISP.

  Read the article

• What do light purple color mean in uTorrent

  - by blasteralfred

  I run uTorrent 3.1.2 in my Windows 7 PC. When I download one file, I see some purple colored lines under Files Tab Pieces. Below is an image of what I am telling (little resized); I think that the light green color indicates downloaded parts. But I have no idea about purple lines. The file is a streamable mp3 file. The connection speed is very low, about 5KB/s down and 1KB/s up. The done file size is not progressing in a smooth way (usually changes in KB are visible), it stays as it is for sometime and then changes to a size (changes in MB), and again the same thing. Questions: Why does this happen? What does the purple color mean? Thank you.

  Read the article

• Powershell and DfsrConfigurationFromAD - how to check all servers are updated?

  - by user57792

  I have two Win2012R2 servers (SERVER1 and SERVER2) that uses DFS Replication for keeping a couple of folders synchronized. Using the following Powershell-script that i run on SERVER1 I disconnect it from the group: Set-DfsrConnection -GroupName "Group1" -SourceComputerName "SERVER1" -DestinationComputerName "SERVER2" -DisableConnection $True; And to update both the servers with the configuration I run the command: Update-DfsrConfigurationFromAD -ComputerName "SERVER1","SERVER2" Now the question is, how can check on SERVER1 that SERVER2 has gotten the updated information from the AD so that I can be sure that the connection has been disabled? Usually it takes around 10-30 seconds after the Update-DfsrConfigurationFromAD command has been run before the DFS Management on SERVER2 gets updated but I need some kind of a "check and sleep loop" in my code. I've tried checking event logs and using Invoke-Command {Get-DfsrConnection} from PM-SERVER01 but nothing seems to work.

  Read the article

• aplay -l says no soundcards found; alsaconf says no supported cords; yet /proc/asound contains cards

  - by nimasmi

  I am trying to get HDMI output using a Gainward Nvidia 210 512 MB on Ubuntu 10.04 Lucid Lynx. I have upgraded alsa-driver, alsa-lib and alsa-utils to 1.0.24 by building from source, thanks to this blog post. Some relevant output... user@box:~$ lspci | grep Audio 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 01:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 01:09.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) user@box:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. Compiled on Sep 15 2012 for kernel 2.6.32-42-generic (SMP). user@box:~$ ls /proc/asound` card0 cards hwdep NVidia oss seq version card1 devices modules NVidia_1 pcm timers user@box:~$ aplay -l aplay: device_list:240: no soundcards found... user@box:~$ sudo /sbin/alsa-utils start * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1403: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... amixer: Invalid command! ...done. Any help appreciated. PS my video card is connected only through the PCI-E slot. I assume there is no extra audio connection required.

  Read the article

• unable to start apache after changes to rc.conf and resov.conf

  - by shupru

  I had a working configuration this morning with the following simple /etc/rc.conf ifconfig_rl0="DHCP" ifconfig_xl="inet 192.168.1.11 netmask 255.255.255." defaultrouter="192.168.1.1" I added the following lines: firewall_enable="YES" firewall_type="SIMPLE" firewall_logging="YES" sshd_enable="YES" apache_enable="YES" mysql_enable="YES" my httpd.conf includes: NameVirtualHost 192.168.1.11 <VirtualHost 192.168.1.11> ... </VirtualHost> now apache and ssh server are down. changed rc.conf back to last working configuration and still no ssh or apache apachectl start #--> /usr/local/sbin/apachectl start: httpd could not be started apachectl status #--> Looking up localhost Making http connection to localhost Alert!: Unable to connect to remote host.

  Read the article

• Ubuntu Connect Button Disabled, cannot connect

  - by CSharperWithJava

  I'm trying to connect to my school network from Ubuntu 12. The network is WPA encrypted and I can connect just fine if the network manager establishes a connection automatically. However, when I get disconnected and try to reconnect a username and password prompt pops up. The credentials are already stored and are autofilled in correctly, but the Connect button is disabled so I can't actually connect to the network. What can I do? The only guess I've found so far is the password is too short and Ubuntu is expecting a full WPA key. I don't administer the school network though so I certainly can't change that.

  Read the article

< Previous Page | 525 526 527 528 529 530 531 532 533 534 535 536  | Next Page >