Search Results

Search found 32833 results on 1314 pages for 'product development'.

Page 533/1314 | < Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >

• How to properly do weapon cool-down reload timer in multi-player laggy environment?

  - by John Murdoch

  I want to handle weapon cool-down timers in a fair and predictable way on both client on server. Situation: Multiple clients connected to server, which is doing hit detection / physics Clients have different latency for their connections to server ranging from 50ms to 500ms. They want to shoot weapons with fairly long reload/cool-down times (assume exactly 10 seconds) It is important that they get to shoot these weapons close to the cool-down time, as if some clients manage to shoot sooner than others (either because they are "early" or the others are "late") they gain a significant advantage. I need to show time remaining for reload on player's screen Clients can have clocks which are flat-out wrong (bad timezones, etc.) What I'm currently doing to deal with latency: Client collects server side state in a history, tagged with server timestamps Client assesses his time difference with server time: behindServerTimeNs = (behindServerTimeNs + (System.nanoTime() - receivedState.getServerTimeNs())) / 2 Client renders all state received from server 200 ms behind from his current time, adjusted by what he believes his time difference with server time is (whether due to wrong clocks, or lag). If he has server states on both sides of that calculated time, he (mostly LERP) interpolates between them, if not then he (LERP) extrapolates. No other client-side prediction of movement, e.g., to make his vehicle seem more responsive is done so far, but maybe will be added later So how do I properly add weapon reload timers? My first idea would be for the server to send each player the time when his reload will be done with each world state update, the client then adjusts it for the clock difference and thus can estimate when the reload will be finished in client-time (perhaps considering also for latency that the shoot message from client to server will take as well?), and if the user mashes the "shoot" button after (or perhaps even slightly before?) that time, send the shoot event. The server would get the shoot event and consider the time shot was made as the server time when it was received. It would then discard it if it is nowhere near reload time, execute it immediately if it is past reload time, and hold it for a few physics cycles until reload is done in case if it was received a bit early. It does all seem a bit convoluted, and I'm wondering whether it will work (e.g., whether it won't be the case that players with lower ping get better reload rates), and whether there are more elegant solutions to this problem.

  Read the article

• Can't detect collision properly using Rectangle.Intersects()

  - by Daniel Ribeiro

  I'm using a single sprite sheet image as the main texture for my breakout game. The image is this: My code is a little confusing, since I'm creating two elements from the same Texture using a Point, to represent the element size and its position on the sheet, a Vector, to represent its position on the viewport and a Rectangle that represents the element itself. Texture2D sheet; Point paddleSize = new Point(112, 24); Point paddleSheetPosition = new Point(0, 240); Vector2 paddleViewportPosition; Rectangle paddleRectangle; Point ballSize = new Point(24, 24); Point ballSheetPosition = new Point(160, 240); Vector2 ballViewportPosition; Rectangle ballRectangle; Vector2 ballVelocity; My initialization is a little confusing as well, but it works as expected: paddleViewportPosition = new Vector2((GraphicsDevice.Viewport.Bounds.Width - paddleSize.X) / 2, GraphicsDevice.Viewport.Bounds.Height - (paddleSize.Y * 2)); paddleRectangle = new Rectangle(paddleSheetPosition.X, paddleSheetPosition.Y, paddleSize.X, paddleSize.Y); Random random = new Random(); ballViewportPosition = new Vector2(random.Next(GraphicsDevice.Viewport.Bounds.Width), random.Next(GraphicsDevice.Viewport.Bounds.Top, GraphicsDevice.Viewport.Bounds.Height / 2)); ballRectangle = new Rectangle(ballSheetPosition.X, ballSheetPosition.Y, ballSize.X, ballSize.Y); ballVelocity = new Vector2(3f, 3f); The problem is I can't detect the collision properly, using this code: if(ballRectangle.Intersects(paddleRectangle)) { ballVelocity.Y = -ballVelocity.Y; } What am I doing wrong?

  Read the article

• HTML5-Canvas: worth using ImpactJS or other framework?

  - by John

  I've been making an HTML5 game without any type of external framework. I haven't found a reason to use one so far. However, there is one thing I'm wondering about. On my Galaxy Nexus, I get about ~40fps. While that would usually be a decent framerate, my game is a rather fast paced game with a gamepad. Because of this, it feels very unsatisfying to play when not capped at 60fps. Are there frameworks out there that can improve performance without toning down on graphics? Or is there something I could do myself without necessarily having to use a framework? I've looked over the basic things such as sticking to integer coordinates, but I didn't see an increase in performance whatsoever? I did some testing with jsperf and results were virtually identical. Does this depend more on the browser?

  Read the article

• Which game logic should run when doing prediction for PNP state updates

  - by spaceOwl

  We are writing a multiplayer game, where each game client (player) is responsible for sending state updates regarding its "owned" objects to other players. Each message that arrives to other (remote) clients is processed as such: Figure out when the message was sent. Create a diff between NOW and that time. Run game specific logic to bring the received state to "current" time. I am wondering which sort of logic should execute as part of step #3 ? Our game is composed of a physical update (position, speed, acceleration, etc) and many other components that can update an object's state and occur regularly (locally). There's a trade off here - Getting the new state quickly or remaining "faithful" to the true state representation and executing the whole thing to predict the "true" state when receiving state updates from remote clients. Which one is recommended to be used? and why?

  Read the article

• My rhythm game runs choppy even with high frame rate

  - by felipedrl

  I'm coding a rhythm game and the game runs smoothly with uncapped fps. But when I try to cap it around 60 the game updates in little chunks, like hiccups, as if it was skipping frames or at a very low frame rate. The reason I need to cap frame rate is because in some computers I tested, the fps varies a lot (from ~80 - ~250 fps) and those drops are noticeable and degrade response time. Since this is a rhythm game this is very important. This issue is driving me crazy. I've spent a few weeks already on it and still can't figure out the problem. I hope someone more experienced than me could shed some light on it. I'll try to put here all the hints I've tried along with two pseudo codes for game loops I tried, so I apologize if this post gets too lengthy. 1st GameLoop: const uint UPDATE_SKIP = 1000 / 60; uint nextGameTick = SDL_GetTicks(); while(isNotDone) { // only false when a QUIT event is generated! if (processEvents()) { if (SDL_GetTicks() > nextGameTick) { update(UPDATE_SKIP); render(); nextGameTick += UPDATE_SKIP; } } } 2nd Game Loop: const uint UPDATE_SKIP = 1000 / 60; while (isNotDone) { LARGE_INTEGER startTime; QueryPerformanceCounter(&startTime); // process events will return false in case of a QUIT event processed if (processEvents()) { update(frameTime); render(); } LARGE_INTEGER endTime; do { QueryPerformanceCounter(&endTime); frameTime = static_cast<uint>((endTime.QuadPart - startTime.QuadPart) * 1000.0 / frequency.QuadPart); } while (frameTime < UPDATE_SKIP); } [1] At first I thought it was a timer resolution problem. I was using SDL_GetTicks, but even when I switched to QueryPerformanceCounter, supposedly less granular, I saw no difference. [2] Then I thought it could be due to a rounding error in my position computation and since game updates are smaller in high FPS that would be less noticeable. Indeed there is an small error, but from my tests I realized that it is not enough to produce the position jumps I'm getting. Also, another intriguing factor is that if I enable vsync I'll get smooth updates @60fps regardless frame cap code. So why not rely on vsync? Because some computers can force a disable on gfx card config. [3] I started printing the maximum and minimum frame time measured in 1sec span, in the hope that every a few frames one would take a long time but still not enough to drop my fps computation. It turns out that, with frame cap code I always get frame times in the range of [16, 18]ms, and still, the game "does not moves like jagger". [4] My process' priority is set to HIGH (Windows doesn't allow me to set REALTIME for some reason). As far as I know there is only one thread running along with the game (a sound callback, which I really don't have access to it). I'm using AudiereLib. I then disabled Audiere by removing it from the project and still got the issue. Maybe there are some others threads running and one of them is taking too long to come back right in between when I measured frame times, I don't know. Is there a way to know which threads are attached to my process? [5] There are some dynamic data being created during game run. But It is a little bit hard to remove it to test. Maybe I'll have to try harder this one. Well, as I told you I really don't know what to try next. Anything, I mean, anything would be of great help. What bugs me more is why at 60fps & vsync enabled I get an smooth update and at 60fps & no vsync I don't. Is there a way to implement software vsync? I mean, query display sync info? Thanks in advance. I appreciate the ones that got this far and yet again I apologize for the long post. Best Regards from a fellow coder.

  Read the article

• How can I deal with actor translations and other "noise" in third-party motion capture data?

  - by Charles

  I'm working on a game, and I've run into a problem with motion capture data. My team is using 3DS Max 2011 and trying to put free motion capture files on our models. The problem we're having is it has become extremely hard to find motion capture data that stays in place. We've found some great motion captures of things like walking and jumping but the actors themselves move within the data, so when we attach these animations to our models and bring them into XNA, the models walk forward even when they should technically be standing still (and then there's also the problem of them resetting at the end of the animation). How can we clean up, at runtime or asset-processing time, the animation in these motion capture files?

  Read the article

• Quaternion LookAt for camera

  - by Homar

  I am using the following code to rotate entities to look at points. glm::vec3 forwardVector = glm::normalize(point - position); float dot = glm::dot(glm::vec3(0.0f, 0.0f, 1.0f), forwardVector); float rotationAngle = (float)acos(dot); glm::vec3 rotationAxis = glm::normalize(glm::cross(glm::vec3(0.0f, 0.0f, 1.0f), forwardVector)); rotation = glm::normalize(glm::quat(rotationAxis * rotationAngle)); This works fine for my usual entities. However, when I use this on my Camera entity, I get a black screen. If I flip the subtraction in the first line, so that I take the forward vector to be the direction from the point to my camera's position, then my camera works but naturally my entities rotate to look in the opposite direction of the point. I compute the transformation matrix for the camera and then take the inverse to be the View Matrix, which I pass to my OpenGL shaders: glm::mat4 viewMatrix = glm::inverse( cameraTransform->GetTransformationMatrix() ); The orthographic projection matrix is created using glm::ortho. What's going wrong?

  Read the article

• Child object free movement on Parent object

  - by The415

  Just to be straightforward, I am completely new to many aspects of coding and am searching for different specs and guidelines to aid me on my journey to crafting a wonderful game in Epic Games' Unreal Engine 4. Okay, I know upon viewing this, some may have little to no clue what I mean, so I'll put it like this to explain what I mean : Imagine a third person game with a simple model of a character. Now, say I have an object as a torso of a character in a game. Now Say I have an object as a head of the character. How could I keep the head as a child of the torso, but at the same time, allow it to move with the camera angle.

  Read the article

• Collision planes confusion

  - by Jeffrey

  I'm following this tutorial by thecplusplusguy and in the linked video he explain that for example for the world basement and walls we need to create the actual rendered (shown to the player) walls and then duplicate them, place them in the same coordinates as the rendered walls and call them collision (by defining their material to collision). Then it defines in the Object loader function that those objects with material == collision are collision planes and should not be rendered but just used to check collision. Now I'm pretty confused. Why would we add this kind of complexity to a problem that can easily be solved by a simple loadObject(string plane_object, bool check_collision);: Creating only the walls object (by loading .obj file in plane_object) Define them also as collision planes whenever the check_collision is set to true In this case we have lowered the complexity of his method and make it more flexible and faster to develop (faster because we don't always have to make a copy for each plane and flexible because we don't hardcode the Object loader). The only case in which this method could not work is when we need hidden collision planes, and for that we could modify the loadObject() function like this: loadObject(string plane_object, bool check_collision = true, bool hide_object = false); Creating only the walls object (by loading .obj file in plane_object) Define them also as collision planes whenever the check_collision is set to true And add the ability to actually show the object or hide it based on hide_object. The final question is: am I right? What would the possible problem encountered with my solution versus his?

  Read the article

• 2D isometric picking

  - by Bikonja

  I'm trying to implement picking in my isometric 2D game, however, I am failing. First of all, I've searched for a solution and came to several, different equations and even a solution using matrices. I tried implementing every single one, but none of them seem to work for me. The idea is that I have an array of tiles, with each tile having it's x and y coordinates specified (in this simplified example it's by it's position in the array). I'm thinking that the tile (0, 0) should be on the left, (max, 0) on top, (0, max) on the bottom and (max, max) on the right. I came up with this loop for drawing, which googling seems to have verified as the correct solution, as has the rendered scene (ofcourse, it could still be wrong, also, forgive the messy names and stuff, it's just a WIP proof of concept code) // Draw code int col = 0; int row = 0; for (int i = 0; i < nrOfTiles; ++i) { // XOffset and YOffset are currently hardcoded values, but will represent camera offset combined with HUD offset Point tile = IsoToScreen(col, row, TileWidth / 2, TileHeight / 2, XOffset, YOffset); int x = tile.X; int y = tile.Y; spriteBatch.Draw(_tiles[i], new Rectangle(tile.X, tile.Y, TileWidth, TileHeight), Color.White); col++; if (col >= Columns) // Columns is the number of tiles in a single row { col = 0; row++; } } // Get selection overlay location (removed check if selection exists for simplicity sake) Point tile = IsoToScreen(_selectedTile.X, _selectedTile.Y, TileWidth / 2, TileHeight / 2, XOffset, YOffset); spriteBatch.Draw(_selectionTexture, new Rectangle(tile.X, tile.Y, TileWidth, TileHeight), Color.White); // End of draw code public Point IsoToScreen(int isoX, int isoY, int widthHalf, int heightHalf, int xOffset, int yOffset) { Point newPoint = new Point(); newPoint.X = widthHalf * (isoX + isoY) + xOffset; newPoint.Y = heightHalf * (-isoX + isoY) + yOffset; return newPoint; } This code draws the tiles correctly. Now I wanted to do picking to select the tiles. For this, I tried coming up with equations of my own (including reversing the drawing equation) and I tried multiple solutions I found on the internet and none of these solutions worked. Trying out lots of solutions, I came upon one that didn't work, but it seemed like an axis was just inverted. I fiddled around with the equations and somehow managed to get it to actually work (but have no idea why it works), but while it's close, it still doesn't work. I'm not really sure how to describe the behaviour, but it changes the selection at wrong places, while being fairly close (sometimes spot on, sometimes a tile off, I believe never more off than the adjacent tile). This is the code I have for getting which tile coordinates are selected: public Point? ScreenToIso(int screenX, int screenY, int tileHeight, int offsetX, int offsetY) { Point? newPoint = null; int nX = -1; int nY = -1; int tX = screenX - offsetX; int tY = screenY - offsetY; nX = -(tY - tX / 2) / tileHeight; nY = (tY + tX / 2) / tileHeight; newPoint = new Point(nX, nY); return newPoint; } I have no idea why this code is so close, especially considering it doesn't even use the tile width and all my attempts to write an equation myself or use a solution I googled failed. Also, I don't think this code accounts for the area outside the "tile" (the transparent part of the tile image), for which I intend to add a color map, but even if that's true, it's not the problem as the selection sometimes switches on approx 25% or 75% of width or height. I'm thinking I've stumbled upon a wrong path and need to backtrack, but at this point, I'm not sure what to do so I hope someone can shed some light on my error or point me to the right path. It may be worth mentioning that my goal is to not only pick the tile. Each main tile will be divided into 5x5 smaller tiles which won't be drawn seperately from the whole main tile, but they will need to be picked out. I think a color map of a main tile with different colors for different coordinates within the main tile should take care of that though, which would fall within using a color map for the main tile (for the transparent parts of the tile, meaning parts that possibly belong to other tiles).

  Read the article

• How to determine the end of list has been reached?

  - by Sweta Dwivedi

  I'm trying to animate my object according to a set of recorded values from kinect skeleton stream by saving the (x,y,z) stream from the skeletal data into a list and then set my objects x and y position from the x,y of the list. However, once the list end has been reached it starts to animate again from the start. I don't want that - I just want the model position to keep going in the positive X direction. Is there any way I can check if end of the list has been reached and to just update the model position in x direction? Or is there any other way to continue moving my sprite once the points in the list are over... i dont want it to start animating all the way again.. protected override void Update(GameTime gameTime) { //position += spriteSpeed * (float)gameTime.ElapsedGameTime.TotalSeconds; //// TODO: Add your update logic here using (StreamReader r = new StreamReader(f)) { string line; Viewport view = graphics.GraphicsDevice.Viewport; int maxWidth = view.Width; int maxHeight = view.Height; while((line = r.ReadLine()) != null) { string[] temp = line.Split(','); int x = (int) Math.Floor(((float.Parse(temp[0]) * 0.5f) + 0.5f) * maxWidth); int y = (int) Math.Floor(((float.Parse(temp[1]) * -0.5f) + 0.5f) * maxHeight); motion_2.Add(new Point(x, y)); } } position.X = motion_2[i].X; position.Y = motion_2[i].Y; i++; a_butterfly_up.Update(gameTime); a_butterfly_side.Update(gameTime); G_vidPlayer.Play(mossV); base.Update(gameTime); }

  Read the article

• How can I get into the educational market?

  - by mmyers

  I believe that my current game project is very well-suited for educational gaming; so well-suited, in fact, that I know of several different schools (one community college and at least one or two high schools) that have used versions of it at some time or another. And that's without any such marketing on my part. I'd like to expand on this part of the potential user base. But I have absolutely no experience in dealing with school administrations. How can I break into this market enough to be noticed? And on a side note, could marketing the game as educational kill the gamers market?

  Read the article

• How to design a separated tutorial mode?

  - by Sylpheed

  I'm working on a "social" game that's about 90% completion. One of the remaining features is the tutorial mode. Basically, the tutorial mode will restrict the user to access some parts of UI and limit the features (like store items). The tutorial will only progress if a certain event is triggered, specifically following the tutorial. The code is ready and we already have an "almost" working game. The problem is I haven't foreseen the tutorial mode while I was doing those 90%. My requirement is there shouldn't be any loading/transition from tutorial mode to normal mode. This means I have to pick up the progress from the tutorial (no re-rendering of assets and stuff). How should I design this in a way where I won't touch anything from my old code? I want it to be as easy as just plugging it in. I don't want to jam the tutorial in my old code since this will lead to many bugs.

  Read the article

• How can I improve my isometric tile-picking algorithm?

  - by Cypher

  I've spent the last few days researching isometric tile-picking algorithms (converting screen-coordinates to tile-coordinates), and have obviously found a lot of the math beyond my grasp. I have come fairly close and what I have is workable, but I would like to improve on this algorithm as it's a little off and seems to pick down and to the right of the mouse pointer. I've uploaded a video to help visualize the current implementation: http://youtu.be/EqwWcq1zuaM My isometric rendering algorithm is based on what is found at this stackoverflow question's answer, with the exception that my x and y axis' are inverted (x increased down-right, while y increased up-right). Here is where I am converting from screen to tiles: // these next few lines convert the mouse pointer position from screen // coordinates to tile-grid coordinates. cameraOffset captures the current // mouse location and takes into consideration the camera's position on screen. System.Drawing.Point cameraOffset = new System.Drawing.Point( 0, 0 ); cameraOffset.X = mouseLocation.X + (int)camera.Left; cameraOffset.Y = ( mouseLocation.Y + (int)camera.Top ); // the camera-aware mouse coordinates are then further converted in an attempt // to select only the "tile" portion of the grid tiles, instead of the entire // rectangle. this algorithm gets close, but could use improvement. mouseTileLocation.X = ( cameraOffset.X + 2 * cameraOffset.Y ) / Global.TileWidth; mouseTileLocation.Y = -( ( 2 * cameraOffset.Y - cameraOffset.X ) / Global.TileWidth ); Things to make note of: mouseLocation is a System.Drawing.Point that represents the screen coordinates of the mouse pointer. cameraOffset is the screen position of the mouse pointer that includes the position of the game camera. mouseTileLocation is a System.Drawing.Point that is supposed to represent the tile coordinates of the mouse pointer. If you check out the above link to youtube, you'll notice that the picking algorithm is off a bit. How can I improve on this?

  Read the article

• Box2d world width and height ratio with screen width and height

  - by Sujith

  I have view, for example GameView which extends SurfaceView . I have integrated Box2D physics in GameView. I have two widths , GameView width, height and Box2D physics world width ,height. I need to get the position of box2d world with the GameView co-ordinates. For example, Total width of screen = 240 Total height of screen = 320 Screen points needed to be mapped onto box2d co-ordinates (x,y) = 127, 139 For this i need to get the max width and height of the Box2d physics world. Is there is any way to get the max width and height of Box2d world. or Can i limit the width and height of box2d world within the screen resolution.

  Read the article

• From where does the game engines add location of an object?

  - by Player

  I have started making my first game( a pong game )with ruby (Gosu). I'm trying to detect the collision of two images using their location by comparing the location of the object (a ball) to another one(a player). For example: if (@player.x - @ball.x).abs <=184 && (@player.y - @ball.y).abs <= 40 @ball.vx = [email protected] @ball.vy = [email protected] But my problem is that with these numbers, the ball collides near the player sometimes, even though the dimensions of the player are correct. So my question is from where does the x values start to count? Is it from the center of gravity of the image or from the beginning of the image? (i.e When you add the image on a specific x,y,z what are these values compared to the image?

  Read the article

• How do client-server cooperation based games like Diablo 3 work?

  - by edgar

  Diablo 3 cooperates with Blizzard servers even during single player games. In fact, Blizzard has had problems with the games "melting their servers." I would like to ask: How do the client and the server communicate? What details does the client leave to the server, and vice versa? What details are redundant - both the client and the server know - and how often do they disagree? The previous paragraph contains the important questions, but I have a few more that I must explain my motivation towards. I am interested in the programming of botting. Ethical botting - I don't plan on actually abusing the automation to run 24/7. I just find it to be a great programming challenge to glean information from a game, and then make decisions from that information. I am stuck in the starting gate. The unofficial questions from this post would be: How can I make a bot (language, tools, libraries)? Can I get information through the communication between client and server, rather than the brute force pixel detection easily used in more static games? There probably is a trust issue, and to that all I can say is that I promise not to abuse the answers. But please feel free to answer any of the questions you feel comfortable with. Thank you!

  Read the article

• Drawing 2D Grid in 3D View - Need help with method

  - by Deukalion

  I'm trying to draw a simple 2D grid for an editor, to able to navigate more clearly around the 3D space, but I can't render it: Grid2D class, creates a grid of a certain size at a location and should just draw lines. public class Grid2D : IShape { private VertexPositionColor[] _vertices; private Vector2 _size; private Vector3 _location; private int _faces; public Grid2D(Vector2 size, Vector3 location, Color color) { float x = 0, y = 0; if (size.X < 1f) { size.X = 1f; } if (size.Y < 1f) { size.Y = 1f; } _size = size; _location = location; List<VertexPositionColor> vertices = new List<VertexPositionColor>(); _faces = 0; for (y = -size.Y; y <= size.Y; y++) { vertices.Add(new VertexPositionColor(location + new Vector3(-size.X, y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(size.X, y, 0), color)); _faces++; } for (x = -size.X; x <= size.X; x++) { vertices.Add(new VertexPositionColor(location + new Vector3(x, -size.Y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(x, size.Y, 0), color)); _faces++; } _vertices = vertices.ToArray(); } public void Render(GraphicsDevice device) { device.DrawUserPrimitives<VertexPositionColor>(PrimitiveType.LineList, _vertices, 0, _faces); } } Like this: +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ Anyone knows what I'm doing wrong? If I add a Shape without texture, it's set automatically to VertexColorEnabled and TextureEnabled = false. This is how I render it: foreach (RenderObject render in _renderObjects) { render.Effect.Projection = projection; render.Effect.View = view; render.Effect.World = world; foreach (EffectPass pass in render.Effect.CurrentTechnique.Passes) { pass.Apply(); try { // Could be a Grid2D render.Shape.Render(_device); } catch { throw; } } } Exception is thrown: The current vertex shader declaration does not include all the elements required by the current Vertex Shader. Normal0 is missing. Simply put, I can't figure out how to draw a few lines. I want to draw them one at a time and I guess that's the problem I haven't figured out, and even when I tried rendering vertices[i], vertices[i+1] and primitiveCount = 1, vertices = 2, and so on it didn't work either. Any suggestions?

  Read the article

• UDK/ UnrealScript class interaction? HUD advice?

  - by Holly

  Beginner basics requested here, While i'm familiar with the basics of OOP programming i've just started looking as UnrealScript for a game i had made in the UDK editor up to now. I have a class that extends UTHUD and another that extends UDKPAWN. I have the pawn destroyed when its been shot 3 times and some basic helloworld text displaying in my HUD but i'm completely lost as to how one would get some sort of feedback between the two classes going on? What i would like to do to start off, is have some text that says something like "Amount of baddies killed: 0" Displayed on the HUD which would then increment each time the player destroyed one of my pawns. I'm sorry if this is an inappropriate question but i've never really worked within a framework like this before and wasn't sure where to go for help to get my footing. All advice appreciated!

  Read the article

• Jittery Movement, Uncontrollably Rotating + Front of Sprite?

  - by Vipar

  So I've been looking around to try and figure out how I make my sprite face my mouse. So far the sprite moves to where my mouse is by some vector math. Now I'd like it to rotate and face the mouse as it moves. From what I've found this calculation seems to be what keeps reappearing: Sprite Rotation = Atan2(Direction Vectors Y Position, Direction Vectors X Position) I express it like so: sp.Rotation = (float)Math.Atan2(directionV.Y, directionV.X); If I just go with the above, the sprite seems to jitter left and right ever so slightly but never rotate out of that position. Seeing as Atan2 returns the rotation in radians I found another piece of calculation to add to the above which turns it into degrees: sp.Rotation = (float)Math.Atan2(directionV.Y, directionV.X) * 180 / PI; Now the sprite rotates. Problem is that it spins uncontrollably the closer it comes to the mouse. One of the problems with the above calculation is that it assumes that +y goes up rather than down on the screen. As I recorded in these two videos, the first part is the slightly jittery movement (A lot more visible when not recording) and then with the added rotation: Jittery Movement So my questions are: How do I fix that weird Jittery movement when the sprite stands still? Some have suggested to make some kind of "snap" where I set the position of the sprite directly to the mouse position when it's really close. But no matter what I do the snapping is noticeable. How do I make the sprite stop spinning uncontrollably? Is it possible to simply define the front of the sprite and use that to make it "face" the right way?

  Read the article

• Is it a good idea to use a formula to balance a game's complexity, in order to keep players in constant flow?

  - by user1107412

  I read a lot about Flow theory and its applications to video games, and I got an idea sticking in my mind. If a number of weight values are applied to different parameters of a certain game level (i.e. the size of the level, the number of enemies, their overal strength, the variance in their behavior, etc), then it should be technically possible to find an overal score mechanism for each level in the game. If a constant ratio of complexity increase were empirically defined, for instance 1,3333, or say, the Golden Ratio, would it be a good idea to arrange the levels in such an order that the increase of overal complexity tends to increase that much? Has somebody tried it?

  Read the article

• Designing a simple snake A.I

  - by DillPixel

  I've looked at some stuff online regarding this specific topic, and a lot of the info that I read involved graphs and path finding. I really don't want to get involved in something too complex & out of my level, and also I don't need my snake to be that intelligent (it will be a large board with the snake not growing in size on every munch). How could you structure a simpler AI for the snake that gets the job done relatively well? I would be able to get the snake to move towards the food item correctly, but my issue is that I'm not sure how to deal with the snake colliding with itself. Say the snake has a look ahead, and it finds that its tail is in the way, it could change direction, but what happens next? Any ideas on how to tackle this? Should the snake build an instruction set from every square, or should it think on the go?

  Read the article

• Import 3ds into JMonkeyEngine 3

  - by Yanick Rochon

  I have asked this question on SO, but I think it will be more suitable here. Basically, we are trying to import an animated character body (with skeleton) from 3D Studio Max to JMonkeyEngine 3, but while we succeeded at importing some animations, we cannot seem to export the skeleton to .skeleton.xml using OgreXML format. Since OgreXML seems to be the favored way to import models into JME, we dropped .obj files and such. Any help appreciated.

  Read the article

• How do I find the angle required to point to another object?

  - by Ginamin

  I am making an air combat game, where you can fly a ship in a 3D space. There is an opponent that flies around as well. When the opponent is not on screen, I want to display an arrow pointing in the direction the user should turn, as such: So, I took the camera location and the oppenent location and did this: double newDirection = atan2(activeCamera.location.y-ship_wrap.location.y, activeCamera.location.x-ship_wrap.location.x); After which, I get the position on the circumferance of a circle which surrounds my crosshairs, like such: trackingArrow.position = point((60*sin(angle)+240),60*cos(angle)+160); It all works fine, except it's the wrong angle! I assume my calculation for the new direction is incorrect. Can anyone help?

  Read the article

• Custom extensible file format for 2d tiled maps

  - by Christian Ivicevic

  I have implemented much of my game logic right now, but still create my maps with nasty for-loops on-the-fly to be able to work with something. Now I wanted to move on and to do some research on how to (un)serialize this data. (I do not search for a map editor - I am speaking of the map file itself) For now I am looking for suggestions and resources, how to implement a custom file format for my maps which should provide the following functionality (based on MoSCoW method): Must have Extensibility and backward compatibility Handling of different layers Metadata on whether a tile is solid or can be passed through Special serialization of entities/triggers with associated properties/metadata Could have Some kind of inclusion of the tileset to prevent having scattered files/tilesets I am developing with C++ (using SDL) and targetting only Windows. Any useful help, tips, suggestions, ... would be appreciated!

  Read the article

< Previous Page | 529 530 531 532 533 534 535 536 537 538 539 540  | Next Page >